Showing 1–50 of 110 results for author: Barkema, G T

Dynamical critical behavior of the two-dimensional three-state Potts model

Authors: Erol Vatansever, Gerard T. Barkema, Nikolaos G. Fytas

Abstract: We investigate the dynamical critical behavior of the two-dimensional three-state Potts model with single spin-flip dynamics in equilibrium. We focus on the mean-squared deviation of the magnetization $M$ (MSD$_{M}$) as a function of time, as well as on the autocorrelation function of $M$. Our simulations reveal the existence of two crossover behaviors at times $τ_1 \sim L^{z_1}$ and… ▽ More We investigate the dynamical critical behavior of the two-dimensional three-state Potts model with single spin-flip dynamics in equilibrium. We focus on the mean-squared deviation of the magnetization $M$ (MSD$_{M}$) as a function of time, as well as on the autocorrelation function of $M$. Our simulations reveal the existence of two crossover behaviors at times $τ_1 \sim L^{z_1}$ and $τ_2 \sim L^{z_2}$, separating three dynamical regimes. MSD$_{M}$ appears to shift from ordinary diffusion in the first regime, to anomalous diffusion in the second, and finally to be constant in the third regime. The magnetization autocorrelation function on the other hand is found to fluctuate between exponential decay, stretched-exponential decay, and then again exponential decay along these three regimes. This behavior is in agreement with the one reported recently for the two-dimensional Ising ferromagnet [Phys. Rev. E {\bf 108}, 034118 (2023)], indicating that the existence of two dynamic critical exponents is not a peculiarity of the Ising model itself. A comparison of both MSD$_{M}$ and the magnetization's autocorrelation function suggests that within our numerical accuracy the exponents $z_1$ and $z_2$ are shared between the Ising and three-state Potts models at least for the particular case of single spin-flip dynamics studied here, even though their equilibrium universality classes are clearly distinct. Continuity of MSD$_{M}$ requires that $α(z_2 - z_1) = γ/ν- z_1$, in which $α$ is the anomalous exponent in the intermediate regime. Since the ratio $γ/ν$ is not shared between the two models, it follows that $α$ is not shared either, an aspect well verified in our simulations. Finally, we also discuss the relevance of our main findings using another useful observable, namely the line magnetization $M_{l}$. △ Less

Submitted 11 July, 2024; originally announced July 2024.

Comments: 7 pages, 5 figures, to be published in Phys. Rev. E

Domain coarsening in polycrystalline graphene

Authors: Zihua Liu, Debabrata Panja, Gerard T. Barkema

Abstract: Graphene is a two-dimensional carbon material which exhibits exceptional properties, making it highly suitable for a wide range of applications. Practical graphene fabrication often yields a polycrystalline structure with many inherent defects, which significantly influence its performance. In this study, we utilize a Monte Carlo approach based on the optimized Wooten, Winer and Weaire (WWW) algor… ▽ More Graphene is a two-dimensional carbon material which exhibits exceptional properties, making it highly suitable for a wide range of applications. Practical graphene fabrication often yields a polycrystalline structure with many inherent defects, which significantly influence its performance. In this study, we utilize a Monte Carlo approach based on the optimized Wooten, Winer and Weaire (WWW) algorithm to simulate the crystalline domain coarsening process of polycrystalline graphene. Our sample configurations show excellent agreement with experimental data. We conduct statistical analyses of the bond and angle distribution, temporal evolution of the defect distribution, and spatial correlation of the lattice orientation that follows a stretched exponential distribution. Furthermore, we thoroughly investigate the diffusion behavior of defects and find that the changes in domain size follow a power-law distribution. We briefly discuss the possible connections of these results to (and differences from) domain growth processes in other statistical models, such as the Ising dynamics. We also examine the impact of buckling of polycrystalline graphene on the crystallization rate under substrate effects. Our findings may offer valuable guidance and insights for both theoretical investigations and experimental advancements. △ Less

Submitted 9 November, 2023; v1 submitted 8 November, 2023; originally announced November 2023.

Critical dynamical behavior of the Ising model

Authors: Zihua Liu, Erol Vatansever, Gerard T. Barkema, Nikolaos G. Fytas

Abstract: We investigate the dynamical critical behavior of the two- and three-dimensional Ising model with Glauber dynamics in equilibrium. In contrast to the usual standing, we focus on the mean-squared deviation of the magnetization $M$, MSD$_M$, as a function of time, as well as on the autocorrelation function of $M$. These two functions are distinct but closely related. We find that MSD$_M$ features a… ▽ More We investigate the dynamical critical behavior of the two- and three-dimensional Ising model with Glauber dynamics in equilibrium. In contrast to the usual standing, we focus on the mean-squared deviation of the magnetization $M$, MSD$_M$, as a function of time, as well as on the autocorrelation function of $M$. These two functions are distinct but closely related. We find that MSD$_M$ features a first crossover at time $τ_1 \sim L^{z_{1}}$, from ordinary diffusion with MSD$_M$ $\sim t$, to anomalous diffusion with MSD$_M$ $\sim t^α$. Purely on numerical grounds, we obtain the values $z_1=0.45(5)$ and $α=0.752(5)$ for the two-dimensional Ising ferromagnet. Related to this, the magnetization autocorrelation function crosses over from an exponential decay to a stretched-exponential decay. At later times, we find a second crossover at time $τ_2 \sim L^{z_{2}}$. Here, MSD$_M$ saturates to its late-time value $\sim L^{2+γ/ν}$, while the autocorrelation function crosses over from stretched-exponential decay to simple exponential one. We also confirm numerically the value $z_{2}=2.1665(12)$, earlier reported as the single dynamic exponent. Continuity of MSD$_M$ requires that $α(z_{2}-z_{1})=γ/ν-z_1$. We speculate that $z_{1} = 1/2$ and $α= 3/4$, values that indeed lead to the expected $z_{2} = 13/6$ result. A complementary analysis for the three-dimensional Ising model provides the estimates $z_{1} = 1.35(2)$, $α=0.90(2)$, and $z_{2} = 2.032(3)$. While $z_{2}$ has attracted significant attention in the literature, we argue that for all practical purposes $z_{1}$ is more important, as it determines the number of statistically independent measurements during a long simulation. △ Less

Submitted 21 September, 2023; v1 submitted 4 July, 2023; originally announced July 2023.

Comments: 6 pages, 6 figures, version published in Physical Review E

Journal ref: Physical Review E 108, 034118 (2023)

Structural dynamics of a model of amorphous silicon

Authors: Zihua Liu, Debabrata Panja, Gerard T. Barkema

Abstract: We perform extensive simulations and systematic statistical analyses of the structural dynamics of amorphous silicon. The simulations follow the dynamics introduced by Wooten, Winer and Weaire: the energy is obtained with the Keating potential, and the dynamics consists of bond transpositions proposed at random locations and accepted with the Metropolis acceptance ratio. The structural quantities… ▽ More We perform extensive simulations and systematic statistical analyses of the structural dynamics of amorphous silicon. The simulations follow the dynamics introduced by Wooten, Winer and Weaire: the energy is obtained with the Keating potential, and the dynamics consists of bond transpositions proposed at random locations and accepted with the Metropolis acceptance ratio. The structural quantities we track are the variations in time of the lateral lengths ($L_x$,$L_y$,$L_z$) of the cuboid simulation cell. We transform these quantities into the volume $V$ and two aspect ratios $B_1$ and $B_2$. Our analysis reveals that at short times, the mean squared displacement (MSD) for all of them exhibits normal diffusion. At longer times, they cross over to anomalous diffusion, with a temperature-dependent anomalous exponent $α<1$. We analyze our findings in the light of two standard models in statistical physics that feature anomalous dynamics, $viz.$, continuous time random walker (CTRW) and fractional Brownian motion (fBm). We obtain the distribution of waiting times, and find that the data are consistent with a stretched-exponential decay. We also show that the three quantities, $V$, $B_1$ and $B_2$ exhibit negative velocity autocorrelation functions. These observations together suggest that the dynamics of the material belong to the fBm class. △ Less

Submitted 7 December, 2023; v1 submitted 4 March, 2023; originally announced March 2023.

Journal ref: Nanomaterials, 2023, 13(24): 3127

Structural dynamics of polycrystalline graphene

Authors: Zihua Liu, Debabrata Panja, Gerard T. Barkema

Abstract: The exceptional properties of the two-dimensional material graphene make it attractive for multiple functional applications, whose large-area samples are typically polycrystalline. Here, we study the mechanical properties of graphene in computer simulations and connect these to the experimentally relevant mechanical properties. In particular, we study the fluctuations in the lateral dimensions of… ▽ More The exceptional properties of the two-dimensional material graphene make it attractive for multiple functional applications, whose large-area samples are typically polycrystalline. Here, we study the mechanical properties of graphene in computer simulations and connect these to the experimentally relevant mechanical properties. In particular, we study the fluctuations in the lateral dimensions of the periodic simulation cell. We show that over short time scales, both the area A and the aspect ratio B of the rectangular periodic box show diffusive behavior under zero external field during dynamical evolution, with diffusion coefficients DA and DB that are related to each other. At longer times, fluctuations in A are bounded, while those in B are not. This makes the direct determination of DB much more accurate, from which DA can then be derived indirectly. We then show that the dynamic behavior of polycrystalline graphene under external forces can also be derived from DA and DB via the Nernst-Einstein relation. Additionally, we study how the diffusion coefficients depend on structural properties of the polycrystalline graphene, in particular, the density of defects. △ Less

Submitted 28 March, 2022; v1 submitted 23 November, 2021; originally announced November 2021.

Comments: 8 pages, 6 figures

Journal ref: Phys. Rev. E. 105 (2022) 044116

A comparison of cluster algorithms for the bond-diluted Ising model

Authors: Arnold H. Kole, Gerard T. Barkema, Lars Fritz

Abstract: Monte Carlo cluster algorithms are popular for their efficiency in studying the Ising model near its critical temperature. We might expect that this efficiency extends to the bond-diluted Ising model. We show, however, that this is not always the case by comparing how the correlation times $τ_w$ and $τ_{\rm sw}$ of the Wolff and Swendsen-Wang cluster algorithms scale as a function of the system si… ▽ More Monte Carlo cluster algorithms are popular for their efficiency in studying the Ising model near its critical temperature. We might expect that this efficiency extends to the bond-diluted Ising model. We show, however, that this is not always the case by comparing how the correlation times $τ_w$ and $τ_{\rm sw}$ of the Wolff and Swendsen-Wang cluster algorithms scale as a function of the system size $L$ when applied to the two-dimensional bond-diluted Ising model. We demonstrate that the Wolff algorithm suffers from a much longer correlation time than in the pure Ising model, caused by isolated (groups of) spins which are infrequently visited by the algorithm. With a simple argument we prove that these cause the correlation time $τ_w$ to be bounded from below by $L^{z_w}$ with a dynamical exponent $z_w=γ/ ν\approx 1.75$ for a bond concentration $p < 1$. Furthermore, we numerically show that this lower bound is actually taken for several values of $p$ in the range $0.5 < p < 1$. Moreover, we show that the Swendsen-Wang algorithm does not suffer from the same problem. Consequently, it has a much shorter correlation time, shorter than in the pure Ising model even. Numerically at $p = 0.6$, we find that its dynamical exponent is $z_{\rm sw} = 0.09(4)$. △ Less

Submitted 14 January, 2022; v1 submitted 18 July, 2021; originally announced July 2021.

Comments: 7 pages, 4 figures

Journal ref: Phys. Rev. E 105, 015313 (2022)

Efficient structural relaxation of polycrystalline graphene models

Authors: Federico D'Ambrosio, Joris Barkema, Gerard T Barkema

Abstract: Large samples of experimentally produced graphene are polycrystalline. For the study of this material, it helps to have realistic computer samples that are also polycrystalline. A common approach to produce such samples in computer simulations is based on the method of Wooten, Winer, and Weaire, originally introduced for the simulation of amorphous silicon. We introduce an early rejection variatio… ▽ More Large samples of experimentally produced graphene are polycrystalline. For the study of this material, it helps to have realistic computer samples that are also polycrystalline. A common approach to produce such samples in computer simulations is based on the method of Wooten, Winer, and Weaire, originally introduced for the simulation of amorphous silicon. We introduce an early rejection variation of their method, applied to graphene, which exploits the local nature of the structural changes to achieve a significant speed-up in the relaxation of the material, without compromising the dynamics. We test it on a 3,200 atoms sample, obtaining a speedup between one and two orders of magnitude. We also introduce a further variation called early decision specifically for relaxing large samples even faster and we test it on two samples of 10,024 and 20,000 atoms, obtaining a further speed-up of an order of magnitude. Furthermore, we provide a graphical manipulation tool to remove unwanted artifacts in a sample, such as bond crossings. △ Less

Submitted 8 May, 2021; v1 submitted 28 March, 2021; originally announced March 2021.

Journal ref: Nanomaterials 11, 1242 (2021)

Super slowing down in the bond-diluted Ising model

Authors: Wei Zhong, Gerard T. Barkema, Debabrata Panja

Abstract: In models in statistical physics, the dynamics often slows down tremendously near the critical point. Usually, the correlation time $τ$ at the critical point increases with system size $L$ in power-law fashion: $τ\sim L^z$, which defines the critical dynamical exponent $z$. We show that this also holds for the 2D bond-diluted Ising model in the regime $p>p_c$, where $p$ is the parameter denoting t… ▽ More In models in statistical physics, the dynamics often slows down tremendously near the critical point. Usually, the correlation time $τ$ at the critical point increases with system size $L$ in power-law fashion: $τ\sim L^z$, which defines the critical dynamical exponent $z$. We show that this also holds for the 2D bond-diluted Ising model in the regime $p>p_c$, where $p$ is the parameter denoting the bond concentration, but with a dynamical critical exponent $z(p)$ which shows a strong $p$-dependence. Moreover, we show numerically that $z(p)$, as obtained from the autocorrelation of the total magnetisation, diverges when the percolation threshold $p_c=1/2$ is approached: $z(p)-z(1) \sim (p-p_c)^{-2}$. We refer to this observed extremely fast increase of the correlation time with size as {\it super slowing down}. Independent measurement data from the mean-square deviation of the total magnetisation, which exhibits anomalous diffusion at the critical point, supports this result. △ Less

Submitted 4 August, 2020; v1 submitted 14 February, 2020; originally announced February 2020.

Comments: 14 pages, 8 figures, to appear in Phys. Rev. E

Journal ref: Phys. Rev. E 102, 022132 (2020)

Approximate dynamical eigenmodes of the Ising model with local spin-exchange moves

Authors: W. Zhong, D. Panja, G. T. Barkema

Abstract: We establish that the Fourier modes of the magnetization serve as the dynamical eigenmodes for the two-dimensional Ising model at the critical temperature with local spin-exchange moves, i.e., Kawasaki dynamics. We obtain the dynamical scaling properties for these modes, and use them to calculate the time evolution of two dynamical quantities for the system, namely the autocorrelation function and… ▽ More We establish that the Fourier modes of the magnetization serve as the dynamical eigenmodes for the two-dimensional Ising model at the critical temperature with local spin-exchange moves, i.e., Kawasaki dynamics. We obtain the dynamical scaling properties for these modes, and use them to calculate the time evolution of two dynamical quantities for the system, namely the autocorrelation function and the mean-square deviation of the line magnetizations. At intermediate times $1 \lesssim t \lesssim L^{z_c}$, where $z_c=4-η=15/4$ is the dynamical critical exponent of the model, we find that the line magnetization undergoes anomalous diffusion. Following our recent work on anomalous diffusion in spin models, we demonstrate that the Generalized Langevin Equation (GLE) with a memory kernel consistently describes the anomalous diffusion, verifying the corresponding fluctuation-dissipation theorem with the calculation of the force autocorrelation function. △ Less

Submitted 24 July, 2019; originally announced July 2019.

Comments: 18 pages, 8 figures, 11 figure files

Journal ref: Phys. Rev. E 100, 012132 (2019)

Discontinuous evolution of the structure of stretching polycrystalline graphene

Authors: Federico D'Ambrosio, Vladimir Juričić, Gerard T. Barkema

Abstract: Polycrystalline graphene has an inherent tendency to buckle, i.e. develop out-of-plane, three-dimensional structure. A force applied to stretch a piece of polycrystalline graphene influences the out-of-plane structure. Even if the graphene is well-relaxed, this happens in non-linear fashion: occasionally, a tiny increase in stretching force induces a significant displacement, in close analogy to a… ▽ More Polycrystalline graphene has an inherent tendency to buckle, i.e. develop out-of-plane, three-dimensional structure. A force applied to stretch a piece of polycrystalline graphene influences the out-of-plane structure. Even if the graphene is well-relaxed, this happens in non-linear fashion: occasionally, a tiny increase in stretching force induces a significant displacement, in close analogy to avalanches, which in turn can create vibrations in the surrounding medium. We establish this effect in computer simulations: by continuously changing the strain, we follow the displacements of the carbon atoms that turn out to exhibit a discontinuous evolution. Furthermore, the displacements exhibit a hysteretic behavior upon the change from low to high stress and back. These behaviors open up a new direction in studying dynamical elasticity of polycrystalline quasi-two-dimensional systems, and in particular the implications on their mechanical and thermal properties. △ Less

Submitted 25 October, 2019; v1 submitted 10 June, 2019; originally announced June 2019.

Comments: Accepted for publication as PRB Rapid Communication

Journal ref: Phys. Rev. B 100, 161402 (2019)

Critical Dynamical Exponent of the Two-Dimensional Scalar $φ^4$ Model with Local Moves

Authors: Wei Zhong, Gerard T. Barkema, Debabrata Panja, Robin C. Ball

Abstract: We study the scalar one-component two-dimensional (2D) $φ^4$ model by computer simulations, with local Metropolis moves. The equilibrium exponents of this model are well-established, e.g. for the 2D $φ^4$ model $γ= 1.75$ and $ν= 1$. The model has also been conjectured to belong to the Ising universality class. However, the value of the critical dynamical exponent $z_c$ is not settled. In this pape… ▽ More We study the scalar one-component two-dimensional (2D) $φ^4$ model by computer simulations, with local Metropolis moves. The equilibrium exponents of this model are well-established, e.g. for the 2D $φ^4$ model $γ= 1.75$ and $ν= 1$. The model has also been conjectured to belong to the Ising universality class. However, the value of the critical dynamical exponent $z_c$ is not settled. In this paper, we obtain $z_c$ for the 2D $φ^4$ model using two independent methods: (a) by calculating the relative terminal exponential decay time $τ$ for the correlation function $\langle φ(t)φ(0)\rangle$, and thereafter fitting the data as $τ\sim L^{z_c}$, where $L$ is the system size, and (b) by measuring the anomalous diffusion exponent for the order parameter, viz., the mean-square displacement (MSD) $\langle Δφ^2(t)\rangle\sim t^c$ as $c=γ/(νz_c)$, and from the numerically obtained value $c\approx 0.80$, we calculate $z_c$. For different values of the coupling constant $λ$, we report that $z_c=2.17\pm0.03$ and $z_c=2.19\pm0.03$ for the two methods respectively. Our results indicate that $z_c$ is independent of $λ$, and is likely identical to that for the 2D Ising model. Additionally, we demonstrate that the Generalised Langevin Equation (GLE) formulation with a memory kernel, identical to those applicable for the Ising model and polymeric systems, consistently capture the observed anomalous diffusion behavior. △ Less

Submitted 2 December, 2018; v1 submitted 13 July, 2018; originally announced July 2018.

Comments: 14 pages, 4 figures, 6 figure files, to appear in Phys. Rev. E

Journal ref: Phys. Rev. E 98, 062128 (2018)

Rupture of amorphous graphene via void formation

Authors: Sandeep K. Jain, Gerard T. Barkema

Abstract: Apart from its unique and exciting electronic properties, many sensor based applications of graphene are purely based on its mechanical and structural properties. Here we report a numerical and analytical study of a void in amorphous (small domain polycrystalline) graphene, and show that the energetics of a void is a balance between the line tension cost versus the increased area gain. Using the c… ▽ More Apart from its unique and exciting electronic properties, many sensor based applications of graphene are purely based on its mechanical and structural properties. Here we report a numerical and analytical study of a void in amorphous (small domain polycrystalline) graphene, and show that the energetics of a void is a balance between the line tension cost versus the increased area gain. Using the concepts of classical nucleation theory, we show that the critical radius of a void formed in amorphous graphene at constant pressure is simply the ratio of line tension at the void and the applied pressure. The values of the critical radius of the void for flat and buckled graphene are 3.48Å~and 3.31Å, respectively at 2 eV/Å${^2}$ pressure. We also show that the dominant finite size correction to the line tension is inversely proportional to the radius of the void in both flat and buckled cases. Contrary to conventional wisdom, with the help of a simple analytical model we find that the shear modulus sets the lower limit of the line tension in the samples. This makes our study relevant for other two-dimensional amorphous materials such as h-BN, phosphorene, borophene, and transition metal dichalcogenides. Our results are useful for the better understanding of polycrystalline graphene under tension and therefore have direct implications on the very fascinating field of strain engineering known as "straintronics" to manipulate or improve graphene's properties. △ Less

Submitted 8 June, 2018; originally announced June 2018.

Comments: 6 Figures, Accepted for publication in PCCP

Journal ref: Phys.Chem.Chem.Phys., 2018, 20, 16966

Dynamic Sampling from a Discrete Probability Distribution with a Known Distribution of Rates

Authors: Federico D'Ambrosio, Hans L. Bodlaender, Gerard T. Barkema

Abstract: In this paper, we consider several efficient data structures for the problem of sampling from a dynamically changing discrete probability distribution, where some prior information is known on the distribution of the rates, in particular the maximum and minimum rate, and where the number of possible outcomes N is large. We consider three basic data structures, the Acceptance-Rejection method, th… ▽ More In this paper, we consider several efficient data structures for the problem of sampling from a dynamically changing discrete probability distribution, where some prior information is known on the distribution of the rates, in particular the maximum and minimum rate, and where the number of possible outcomes N is large. We consider three basic data structures, the Acceptance-Rejection method, the Complete Binary Tree and the Alias method. These can be used as building blocks in a multi-level data structure, where at each of the levels, one of the basic data structures can be used, with the top level selecting a group of events, and the bottom level selecting an element from a group. Depending on assumptions on the distribution of the rates of outcomes, different combinations of the basic structures can be used. We prove that for particular data structures the expected time of sampling and update is constant when the rate distribution follows certain conditions. We show that for any distribution, combining a tree structure with the Acceptance-Rejection method, we have an expected time of sampling and update of $O\left(\log\log{r_{max}}/{r_{min}}\right)$ is possible, where $r_{max}$ is the maximum rate and $r_{min}$ the minimum rate. We also discuss an implementation of a Two Levels Acceptance-Rejection data structure, that allows expected constant time for sampling, and amortized constant time for updates, assuming that $r_{max}$ and $r_{min}$ are known and the number of events is sufficiently large. We also present an experimental verification, highlighting the limits given by the constraints of a real-life setting. △ Less

Submitted 12 October, 2021; v1 submitted 7 February, 2018; originally announced February 2018.

ACM Class: G.3

Journal ref: Comput Stat (2021)

Generalised Langevin Equation Formulation for Anomalous Diffusion in the Ising Model at the Critical Temperature

Authors: Wei Zhong, Debabrata Panja, Gerard T. Barkema, Robin C. Ball

Abstract: We consider the two- (2D) and three-dimensional (3D) Ising model on a square lattice at the critical temperature $T_c$, under Monte-Carlo spin flip dynamics. The bulk magnetisation and the magnetisation of a tagged line in the 2D Ising model, and the bulk magnetisation and the magnetisation of a tagged plane in the 3D Ising model exhibit anomalous diffusion. Specifically, their mean-square displac… ▽ More We consider the two- (2D) and three-dimensional (3D) Ising model on a square lattice at the critical temperature $T_c$, under Monte-Carlo spin flip dynamics. The bulk magnetisation and the magnetisation of a tagged line in the 2D Ising model, and the bulk magnetisation and the magnetisation of a tagged plane in the 3D Ising model exhibit anomalous diffusion. Specifically, their mean-square displacement increases as power-laws in time, collectively denoted as $\sim t^c$, where $c$ is the anomalous exponent. We argue that the anomalous diffusion in all these quantities for the Ising model stems from time-dependent restoring forces, decaying as power-laws in time --- also with exponent $c$ --- in striking similarity to anomalous diffusion in polymeric systems. Prompted by our previous work that has established a memory-kernel based Generalised Langevin Equation (GLE) formulation for polymeric systems, we show that a closely analogous GLE formulation holds for the Ising model as well. We obtain the memory kernels from spin-spin correlation functions, and the formulation allows us to consistently explain anomalous diffusion as well as anomalous response of the Ising model to an externally applied magnetic field in a consistent manner. △ Less

Submitted 3 July, 2018; v1 submitted 31 January, 2018; originally announced January 2018.

Comments: 22 pages, 7 figures, 20 figure files

Journal ref: Phys. Rev. E 98, 012124 (2018)

Exact enumeration of self-avoiding walks on BCC and FCC lattices

Authors: Raoul D. Schram, Gerard T. Barkema, Rob H. Bisseling, Nathan Clisby

Abstract: Self-avoiding walks on the body-centered-cubic (BCC) and face-centered-cubic (FCC) lattices are enumerated up to lengths 28 and 24, respectively, using the length-doubling method. Analysis of the enumeration results yields values for the exponents $γ$ and $ν$ which are in agreement with, but less accurate than those obtained earlier from enumeration results on the simple cubic lattice. The non-uni… ▽ More Self-avoiding walks on the body-centered-cubic (BCC) and face-centered-cubic (FCC) lattices are enumerated up to lengths 28 and 24, respectively, using the length-doubling method. Analysis of the enumeration results yields values for the exponents $γ$ and $ν$ which are in agreement with, but less accurate than those obtained earlier from enumeration results on the simple cubic lattice. The non-universal growth constant and amplitudes are accurately determined, yielding for the BCC lattice $μ=6.530520(20)$, $A=1.1785(40)$, and $D=1.0864(50)$, and for the FCC lattice $μ=10.037075(20)$, $A=1.1736(24)$, and $D=1.0460(50)$. △ Less

Submitted 27 March, 2017; originally announced March 2017.

Comments: 10 pages, 8 figures

Structural characterization of carbon nanotubes via the vibrational density of states

Authors: Albert J. Pool, Sandeep K. Jain, Gerard T. Barkema

Abstract: The electrical and chemical properties of carbon nanotubes vary significantly with different chirality and diameter, making the experimental determination of these structural properties important. Here, we show that the vibrational density of states (VDOS) contains information on the structure of carbon nanotubes, particularly at low frequencies. We show that the diameter and chirality of the nano… ▽ More The electrical and chemical properties of carbon nanotubes vary significantly with different chirality and diameter, making the experimental determination of these structural properties important. Here, we show that the vibrational density of states (VDOS) contains information on the structure of carbon nanotubes, particularly at low frequencies. We show that the diameter and chirality of the nanotubes can be determined from the characteristic low frequency $L$ and $L'$ modes in the VDOS. For zigzag nanotubes, the $L$ peak splits into two peaks giving rise to another low energy $L"$ peak. The significant changes in the frequencies and relative intensities of these peaks open up a route to distinguish among structurally different nanotubes. A close study of different orientations of Stone-Wales defects with varying defect density reveals that different structural defects also leave distinct fingerprints in the VDOS, particularly in the $L$ and $L'$ modes. With our results, more structural information can be obtained from experiments which can directly measure the VDOS, such as inelastic electron and inelastic neutron spectroscopy. △ Less

Submitted 10 March, 2017; originally announced March 2017.

Comments: 5 Figures, Accepted for publication in Carbon

Journal ref: Carbon, 118C, 58-65, 2017

Probing the Shape of a Graphene Nanobubble

Authors: Sandeep K. Jain, Vladimir Juricic, Gerard T. Barkema

Abstract: Gas molecules trapped between graphene and various substrates in the form of bubbles are observed experimentally. The study of these bubbles is useful in determining the elastic and mechanical properties of graphene, adhesion energy between graphene and substrate, and manipulating the electronic properties via strain engineering. In our numerical simulations, we use a simple description of elastic… ▽ More Gas molecules trapped between graphene and various substrates in the form of bubbles are observed experimentally. The study of these bubbles is useful in determining the elastic and mechanical properties of graphene, adhesion energy between graphene and substrate, and manipulating the electronic properties via strain engineering. In our numerical simulations, we use a simple description of elastic potential and adhesion energy to show that for small gas bubbles ($\sim 10$ nm) the van der Waals pressure is in the order of 1 GPa. These bubbles show universal shape behavior irrespective of their size, as observed in recent experiments. With our results the shape and volume of the trapped gas can be determined via the vibrational density of states (VDOS) using experimental techniques such as inelastic tunneling and inelastic neutron scattering. The elastic energy distribution in the graphene layer which traps the nanobubble is homogeneous apart from its edge, but the strain depends on the bubble size thus variation in bubble size allows control of the electronic and optical properties. △ Less

Submitted 20 February, 2017; originally announced February 2017.

Comments: 5 Figures (Supplementary: 1 Figure), Accepted for publication in PCCP

Journal ref: Phys. Chem. Chem. Phys., 19, 7465, 2017

Structure of twisted and buckled bilayer graphene

Authors: Sandeep K. Jain, Vladimir Juricic, Gerard T. Barkema

Abstract: We study the atomic structure of twisted bilayer graphene, with very small mismatch angles ($θ\sim 0.28^0$), a topic of intense recent interest. We use simulations, in which we combine a recently presented semi-empirical potential for single-layer graphene, with a new term for out-of-plane deformations, [Jain et al., J. Phys. Chem. C, 119, 2015] and an often-used interlayer potential [Kolmogorov e… ▽ More We study the atomic structure of twisted bilayer graphene, with very small mismatch angles ($θ\sim 0.28^0$), a topic of intense recent interest. We use simulations, in which we combine a recently presented semi-empirical potential for single-layer graphene, with a new term for out-of-plane deformations, [Jain et al., J. Phys. Chem. C, 119, 2015] and an often-used interlayer potential [Kolmogorov et al., Phys. Rev. B, 71, 2005]. This combination of potentials is computationally cheap but accurate and precise at the same time, allowing us to study very large samples, which is necessary to reach very small mismatch angles in periodic samples. By performing large scale atomistic simulations, we show that the vortices appearing in the Moiré pattern in the twisted bilayer graphene samples converge to a constant size in the thermodynamic limit. Furthermore, the well known sinusoidal behavior of energy no longer persists once the misorientation angle becomes very small ($θ<1^0$). We also show that there is a significant buckling after the relaxation in the samples, with the buckling height proportional to the system size. These structural properties have direct consequences on the electronic and optical properties of bilayer graphene. △ Less

Submitted 3 November, 2016; originally announced November 2016.

Comments: 8 figures, 14 pages, Accepted for publication in 2D Materials

Journal ref: 2D Materials, 4, 015018, 2016

Boundaries Determine the Formation Energies of Lattice Defects in Two-Dimensional Buckled Materials

Authors: Sandeep K. Jain, Vladimir Juricic, Gerard T. Barkema

Abstract: Lattice defects are inevitably present in two-dimensional materials, with direct implications on their physical and chemical properties. We show that the formation energy of a lattice defect in buckled two-dimensional crystals is not uniquely defined as it takes different values for different boundary conditions even in the thermodynamic limit, as opposed to their perfectly planar counterparts. Al… ▽ More Lattice defects are inevitably present in two-dimensional materials, with direct implications on their physical and chemical properties. We show that the formation energy of a lattice defect in buckled two-dimensional crystals is not uniquely defined as it takes different values for different boundary conditions even in the thermodynamic limit, as opposed to their perfectly planar counterparts. Also, the approach to the thermodynamic limit follows a different scaling: inversely proportional to the logaritm of the system size for buckled materials, rather than the usual power-law approach. In graphene samples of $\sim 1000$ atoms, different boundary conditions can cause differences exceeding 10 eV. Besides presenting numerical evidence in simulations, we show that the universal features in this behavior can be understood with simple bead-spring models. Fundamentally, our findings imply that it is necessary to specify the boundary conditions for the energy of the lattice defects in the buckled two-dimensional crystals to be uniquely defined, and this may explain the lack of agreement in the reported values of formation energies in graphene. We argue that boundary conditions may also have impact on other physical observables such as the melting temperature. △ Less

Submitted 13 July, 2016; originally announced July 2016.

Comments: 3 Figures, 1 Table, 5 pages (Supplementary: 5 Pages and 3 Figures)

Journal ref: Phys. Rev. B 94, 020102(R) (2016)

Finite-size scaling at infinite-order phase transitions

Authors: Rick Keesman, Jules Lamers, R. A. Duine, G. T. Barkema

Abstract: For systems with infinite-order phase transitions, in which an order parameter smoothly becomes nonzero, a new observable for finite-size scaling analysis is suggested. By construction this new observable has the favourable property of diverging at the critical point. Focussing on the example of the F-model we compare the analysis of this observable with that of another observable, which is also d… ▽ More For systems with infinite-order phase transitions, in which an order parameter smoothly becomes nonzero, a new observable for finite-size scaling analysis is suggested. By construction this new observable has the favourable property of diverging at the critical point. Focussing on the example of the F-model we compare the analysis of this observable with that of another observable, which is also derived from the order parameter but does not diverge, as well as that of the associated susceptibility. We discuss the difficulties that arise in the finite-size scaling analysis of such systems. In particular we show that one may reach incorrect conclusions from large-system size extrapolations of observables that are not known to diverge at the critical point. Our work suggests that one should base finite-size scaling analyses for infinite-order phase transitions only on observables that are guaranteed to diverge. △ Less

Submitted 14 September, 2016; v1 submitted 28 May, 2016; originally announced May 2016.

Comments: 7 pages, 5 figures, 1 table; v2: publication details added

Journal ref: J Stat Mech: Theor Exp, vol 2016 (2016), pp 093201

Dynamics of a double-stranded DNA segment in a shear flow

Authors: Debabrata Panja, Gerard T. Barkema, J. M. J. van Leeuwen

Abstract: We study the dynamics of a double-stranded DNA (dsDNA) segment, as a semiflexible polymer, in a shear flow, the strength of which is customarily expressed in terms of the dimensionless Weissenberg number Wi. Polymer chains in shear flows are well-known to undergo tumbling motion. When the chain lengths are much smaller than the persistence length, one expects a (semiflexible) chain to tumble as a… ▽ More We study the dynamics of a double-stranded DNA (dsDNA) segment, as a semiflexible polymer, in a shear flow, the strength of which is customarily expressed in terms of the dimensionless Weissenberg number Wi. Polymer chains in shear flows are well-known to undergo tumbling motion. When the chain lengths are much smaller than the persistence length, one expects a (semiflexible) chain to tumble as a rigid rod. At low Wi, a polymer segment shorter than the persistence length does indeed tumble as a rigid rod. However, for higher Wi the chain does not tumble as a rigid rod, even if the polymer segment is shorter than the persistence length. In particular, from time to time the polymer segment may assume a buckled form, a phenomenon commonly known as Euler buckling. Using a bead-spring Hamiltonian model for extensible dsDNA fragments, we first analyze Euler buckling in terms of the oriented deterministic state (ODS), which is obtained as the steady-state solution of the dynamical equations by turning off the stochastic (thermal) forces at a fixed orientation of the chain. The ODS exhibits symmetry breaking at a critical Weissenberg number Wi$_{\text c}$, analogous to a pitchfork bifurcation in dynamical systems. We then follow up the analysis with simulations and demonstrate symmetry breaking in computer experiments, characterized by a unimodal to bimodal transformation of the probability distribution of the second Rouse mode with increasing Wi. Our simulations reveal that shear can cause strong deformation for a chain that is shorter than its persistence length, similar to recent experimental observations. △ Less

Submitted 16 March, 2016; originally announced March 2016.

Comments: 23 pages, 8 figures and one movie as ancillary file, to appear in Phys. Rev. E

Journal ref: Phys. Rev. E 93, 042501 (2016)

Skyrmions in square-lattice antiferromagnets

Authors: Rick Keesman, Mark Raaijmakers, A. E. Baerends, G. T. Barkema, R. A. Duine

Abstract: The ground states of square lattice two-dimensional antiferromagnets with anisotropy in an external magnetic field are determined using Monte Carlo simulations and compared to theoretical analysis. We find a new phase in between the spin-flop and spiral phase that shows strong similarity to skyrmions in ferromagnetic thin films. We show that this phase arises as a result of the competition between… ▽ More The ground states of square lattice two-dimensional antiferromagnets with anisotropy in an external magnetic field are determined using Monte Carlo simulations and compared to theoretical analysis. We find a new phase in between the spin-flop and spiral phase that shows strong similarity to skyrmions in ferromagnetic thin films. We show that this phase arises as a result of the competition between Zeeman and Dzyaloshinskii-Moriya interaction energies of the magnetic system. Moreover, we find that isolated (anti-)skyrmions are stabilized in finite-sized systems, even at higher temperatures. The existence of thermodynamically stable skyrmions in square-lattice antiferromagnets provides an appealing alternative over skyrmions in ferromagnets as data carriers. △ Less

Submitted 11 March, 2016; originally announced March 2016.

Comments: 7 pages, 4 figures

Journal ref: Phys. Rev. B 94, 054402 (2016)

Strong long-range relaxations of structural defects in graphene simulated using a new semi-empirical potential

Authors: Sandeep K. Jain, Gerard T. Barkema, Normand Mousseau, Chang-Ming Fang, Marijn A. van Huis

Abstract: We present a new semi-empirical potential for graphene, which includes also an out-of-plane energy term. This novel potential is developed from density functional theory (DFT) calculations for small numbers of atoms, and can be used for configurations with millions of atoms. Our simulations show that buckling caused by typical defects such as the Stone-Wales (SW) defect extends to hundreds of nano… ▽ More We present a new semi-empirical potential for graphene, which includes also an out-of-plane energy term. This novel potential is developed from density functional theory (DFT) calculations for small numbers of atoms, and can be used for configurations with millions of atoms. Our simulations show that buckling caused by typical defects such as the Stone-Wales (SW) defect extends to hundreds of nanometers. Surprisingly, this long-range relaxation lowers the defect formation energy dramatically - by a factor of $2$ or $3$ - implying that previously published DFT-calculated defect formation energies suffer from large systematic errors. We also show the applicability of the novel potential to other long-range defects including line dislocations and grain boundaries, all of which exhibit pronounced out-of-plane relaxations. We show that the energy as a function of dislocation separation diverges logarithmically for flat graphene, but converges to a constant for free standing buckled graphene. A potential in which the atoms are attracted to the 2D plane restores the logarithmic behaviour of the energy. Future simulations employing this potential will elucidate the influence of the typical long-range buckling and rippling on the physical properties of graphene. △ Less

Submitted 28 October, 2015; originally announced October 2015.

Journal ref: J. Phys. Chem. C 2015, 119, 9646-9655

Probing crystallinity of graphene samples via the vibrational density of states

Authors: Sandeep K. Jain, Vladimir Juricic, Gerard T. Barkema

Abstract: The purity of graphene samples is of crucial importance for their experimental and practical use. In this regard, the detection of the defects is of direct relevance. Here, we show that structural defects in graphene samples give rise to clear signals in the vibrational density of states (VDOS) at the specific peaks at high and low frequencies.These can be used as an independent probe of the defec… ▽ More The purity of graphene samples is of crucial importance for their experimental and practical use. In this regard, the detection of the defects is of direct relevance. Here, we show that structural defects in graphene samples give rise to clear signals in the vibrational density of states (VDOS) at the specific peaks at high and low frequencies.These can be used as an independent probe of the defect density. In particular, we consider grain boundaries made of pentagon-heptagon pairs, and show that they lead to a shift of the characteristic vibrational D mode towards higher frequency; this distinguishes these line defects from the Stone-Wales point defects, which do not lead to such a shift. Our findings may be instrumental for the detection of structural lattice defects using experimental techniques that can directly measure VDOS, such as inelastic electron tunneling and inelastic neutron spectroscopy. △ Less

Submitted 28 October, 2015; originally announced October 2015.

Journal ref: J. Phys. Chem. Lett. 2015,6,3897-3902

Degeneracies and fluctuations of Néèl skyrmions in confined geometries

Authors: Rick Keesman, A. O. Leonov, P. van Dieten, Stefan Buhrandt, G. T. Barkema, Lars Fritz, R. A. Duine

Abstract: The recent discovery of tunable Dzyaloshinskii-Moriya interactions in layered magnetic materials with perpendicular magnetic anisotropy makes them promising candidates for stabilization and manipulation of skyrmions at elevated temperatures. In this article, we use Monte Carlo simulations to investigate the robustness of skyrmions in these materials against thermal fluctuations and finite-size eff… ▽ More The recent discovery of tunable Dzyaloshinskii-Moriya interactions in layered magnetic materials with perpendicular magnetic anisotropy makes them promising candidates for stabilization and manipulation of skyrmions at elevated temperatures. In this article, we use Monte Carlo simulations to investigate the robustness of skyrmions in these materials against thermal fluctuations and finite-size effects. We find that in confined geometries and at finite temperatures skyrmions are present in a large part of the phase diagram. Moreover, we find that the confined geometry favors the skyrmion over the spiral phase when compared to infinitely large systems. Upon tuning the magnetic field through the skyrmion phase, the system undergoes a cascade of transitions in the magnetic structure through states of different number of skyrmions, elongated and half-skyrmions, and spiral states. We consider how quantum and thermal fluctuations lift the degeneracies that occur at these transitions, and find that states with more skyrmions are typically favored by fluctuations over states with less skyrmions. Finally, we comment on electrical detection of the various phases through the topological and anomalous Hall effects. △ Less

Submitted 16 December, 2015; v1 submitted 31 May, 2015; originally announced June 2015.

Comments: 10 pages, 7 figures

Journal ref: Phys. Rev. B 92, 134405 (2015)

Efficient simulation of semiflexible polymers

Authors: Debabrata Panja, Gerard T. Barkema, J. M. J. van Leeuwen

Abstract: Using a recently developed bead-spring model for semiflexible polymers that takes into account their natural extensibility, we report an efficient algorithm to simulate the dynamics for polymers like double-stranded DNA (dsDNA) in the absence of hydrodynamic interactions. The dsDNA is modelled with one bead-spring element per basepair, and the polymer dynamics is described by the Langevin equation… ▽ More Using a recently developed bead-spring model for semiflexible polymers that takes into account their natural extensibility, we report an efficient algorithm to simulate the dynamics for polymers like double-stranded DNA (dsDNA) in the absence of hydrodynamic interactions. The dsDNA is modelled with one bead-spring element per basepair, and the polymer dynamics is described by the Langevin equation. The key to efficiency is that we describe the equations of motion for the polymer in terms of the amplitudes of the polymer's fluctuation modes, as opposed to the use of the physical positions of the beads. We show that, within an accuracy tolerance level of $5\%$ of several key observables, the model allows for single Langevin time steps of $\approx1.6$, 8, 16 and 16 ps for a dsDNA model-chain consisting of 64, 128, 256 and 512 basepairs (i.e., chains of 0.55, 1.11, 2.24 and 4.48 persistence lengths) respectively. Correspondingly, in one hour, a standard desktop computer can simulate 0.23, 0.56, 0.56 and 0.26 ms of these dsDNA chains respectively. We compare our results to those obtained from other methods, in particular, the (inextensible discretised) WLC model. Importantly, we demonstrate that at the same level of discretisation, i.e., when each discretisation element is one basepair long, our algorithm gains about 5-6 orders of magnitude in the size of time steps over the inextensible WLC model. Further, we show that our model can be mapped one-on-one to a discretised version of the extensible WLC model; implying that the speed-up we achieve in our model must hold equally well for the latter. We also demonstrate the use of the method by simulating efficiently the tumbling behaviour of a dsDNA segment in a shear flow. △ Less

Submitted 10 September, 2015; v1 submitted 13 November, 2014; originally announced November 2014.

Comments: 33 pages in double-spacing format, 5 figures, 6 tables and a movie as ancillary file, to appear in Phys. Rev. E

Journal ref: Phys. Rev. E 92, 032603 (2015)

Semiflexible Polymer Dynamics with a Bead-Spring Model

Authors: Gerard T. Barkema, Debabrata Panja, J. M. J. van Leeuwen

Abstract: We study the dynamical properties of semiflexible polymers with a recently introduced bead-spring model. We focus on double-stranded DNA. The two parameters of the model, $T^*$ and $ν$, are chosen to match its experimental force-extension curve. The bead-spring Hamiltonian is approximated in the first order by the Hessian that is quadratic in the bead positions. The eigenmodels of the Hessian prov… ▽ More We study the dynamical properties of semiflexible polymers with a recently introduced bead-spring model. We focus on double-stranded DNA. The two parameters of the model, $T^*$ and $ν$, are chosen to match its experimental force-extension curve. The bead-spring Hamiltonian is approximated in the first order by the Hessian that is quadratic in the bead positions. The eigenmodels of the Hessian provide the longitudinal (stretching) and transverse (bending) eigenmodes of the polymer, and the corresponding eigenvalues match well with the established phenomenology of semiflexible polymers. Using the longitudinal and transverse eigenmodes, we obtain analytical expressions of (i) the autocorrelation function of the end-to-end vector, (ii) the autocorrelation function of a bond (i.e., a spring, or a tangent) vector at the middle of the chain, and (iii) the mean-square displacement of a tagged bead in the middle of the chain, as sum over the contributions from the modes. We also perform simulations with the full dynamics of the model. The simulations yield numerical values of the correlation functions (i-iii) that agree very well with the analytical expressions for the linearized dynamics. We also study the mean-square displacement of the longitudinal component of the end-to-end vector that showcases strong nonlinear effects in the polymer dynamics, and we identify at least an effective $t^{7/8}$ power-law regime in its time-dependence. Nevertheless, in comparison to the full mean-square displacement of the end-to-end vector the nonlinear effects remain small at all times --- it is in this sense we state that our results demonstrate that the linearized dynamics suffices for dsDNA fragments that are shorter than or comparable to the persistence length. Our results are consistent with those of the wormlike chain (WLC) model, the commonly used descriptive tool of semiflexible polymers. △ Less

Submitted 1 October, 2014; originally announced October 2014.

Comments: 33 pages in double-spacing format, 7 figures, to appear in JSTAT

Journal ref: J. Stat. Mech. (2014) P11008

KPZ universality class and the anchored Toom interface

Authors: G. T. Barkema, P. L. Ferrari, J. L. Lebowitz, H. Spohn

Abstract: We revisit the anchored Toom interface and use KPZ scaling theory to argue that the interface fluctuations are governed by the Airy_1 process with the role of space and time interchanged. There is no free parameter. The predictions are numerically well confirmed for space-time statistics in the stationary state. In particular the spatial fluctuations of the interface are given by the GOE edge dist… ▽ More We revisit the anchored Toom interface and use KPZ scaling theory to argue that the interface fluctuations are governed by the Airy_1 process with the role of space and time interchanged. There is no free parameter. The predictions are numerically well confirmed for space-time statistics in the stationary state. In particular the spatial fluctuations of the interface are given by the GOE edge distribution of Tracy and Widom. △ Less

Submitted 23 September, 2014; v1 submitted 30 May, 2014; originally announced May 2014.

Comments: 17 pages, 4 figures

Through the Eye of the Needle: Recent Advances in Understanding Biopolymer Translocation

Authors: Debabrata Panja, Gerard T. Barkema, Anatoly B. Kolomeisky

Abstract: In recent years polymer translocation, i.e., transport of polymeric molecules through nanometer-sized pores and channels embedded in membranes, has witnessed strong advances. It is now possible to observe single-molecule polymer dynamics during the motion through channels with unprecedented spatial and temporal resolution. These striking experimental studies have stimulated many theoretical develo… ▽ More In recent years polymer translocation, i.e., transport of polymeric molecules through nanometer-sized pores and channels embedded in membranes, has witnessed strong advances. It is now possible to observe single-molecule polymer dynamics during the motion through channels with unprecedented spatial and temporal resolution. These striking experimental studies have stimulated many theoretical developments. In this short theory-experiment review, we discuss recent progress in this field with a strong focus on non-equilibrium aspects of polymer dynamics during the translocation process. △ Less

Submitted 21 August, 2013; originally announced August 2013.

Comments: 29 pages, 6 figures, 3 tables, to appear in J. Phys.: Condens. Matter as a Topical Review

Journal ref: J. Phys.: Condens. Matter 25, 413101 (2013)

Universality of the triplet contact process with diffusion

Authors: Raoul D. Schram, Gerard T. Barkema

Abstract: The one-dimensional triplet contact process with diffusion (TCPD) model has been studied using fast multispin GPU Monte Carlo simulations. In particular, the particle density ρand the density of pairs of neighboring particles ρ_p have been monitored as a function of time. Mean field predictions for the time evolution of these observables in the critical point are ρ\sim t^{-δ} and ρ_p\sim t^{-δ_p}… ▽ More The one-dimensional triplet contact process with diffusion (TCPD) model has been studied using fast multispin GPU Monte Carlo simulations. In particular, the particle density ρand the density of pairs of neighboring particles ρ_p have been monitored as a function of time. Mean field predictions for the time evolution of these observables in the critical point are ρ\sim t^{-δ} and ρ_p\sim t^{-δ_p} with δ=1/3 and δ_p=2/3. We observe that in the vicinity of the critical point of the model, the ratio ρ_p/ρtends to a constant, which shows that the one-dimensional TCPD model is not described by mean field behavior. Furthermore, our long simulations allow us to conclude that the mean field prediction of the exponent $δ$ is almost certainly not correct either. Since the crossover to the critical regime is extremely slow for the TCPD model, we are unable to pinpoint a precise value for δ, though we find as an upper bound δ< 0.32. △ Less

Submitted 5 March, 2013; originally announced March 2013.

Comments: 7 pages, 3 figures

Dynamical Eigenmodes of a Polymerized Membrane

Authors: Rick Keesman, Gerard T. Barkema, Debabrata Panja

Abstract: We study the bead-spring model for a polymerized phantom membrane in the overdamped limit, which is the two-dimensional generalization of the well-known Rouse model for polymers. We derive the {\it exact} eigenmodes of the membrane dynamics (the "Rouse modes"). This allows us to obtain exact analytical expressions for virtually any equilibrium or dynamical quantity for the membrane. As examples we… ▽ More We study the bead-spring model for a polymerized phantom membrane in the overdamped limit, which is the two-dimensional generalization of the well-known Rouse model for polymers. We derive the {\it exact} eigenmodes of the membrane dynamics (the "Rouse modes"). This allows us to obtain exact analytical expressions for virtually any equilibrium or dynamical quantity for the membrane. As examples we determine the radius of gyration, the mean square displacement of a tagged bead, and the autocorrelation function of the difference vector between two tagged beads. Interestingly, even in the presence of tensile forces of any magnitude the Rouse modes remain the exact eigenmodes for the membrane. With stronger forces the membrane becomes essentially flat, and does not get the opportunity to intersect itself; in such a situation our analysis provides a useful and exactly soluble approach to the dynamics for a realistic model flat membrane under tension. △ Less

Submitted 13 February, 2013; v1 submitted 5 December, 2012; originally announced December 2012.

Comments: 17 pages, 4 figures, minor changes, references updated, to appear in JSTAT

Journal ref: J. Stat. Mech. (2013) P04009

A model for the dynamics of extensible semiflexible polymers

Authors: Gerard T. Barkema, J. M. J. van Leeuwen

Abstract: We present a model for semiflexible polymers in Hamiltonian formulation which interpolates between a Rouse chain and worm-like chain. Both models are realized as limits for the parameters. The model parameters can also be chosen to match the experimental force-extension curve for double-stranded DNA. Near the ground state of the Hamiltonian, the eigenvalues for the longitudinal (stretching) and th… ▽ More We present a model for semiflexible polymers in Hamiltonian formulation which interpolates between a Rouse chain and worm-like chain. Both models are realized as limits for the parameters. The model parameters can also be chosen to match the experimental force-extension curve for double-stranded DNA. Near the ground state of the Hamiltonian, the eigenvalues for the longitudinal (stretching) and the transversal (bending) modes of a chain with N springs, indexed by p, scale as lambda_lp ~ (p/N)^2 and lambda_tp ~ p^2(p-1)^2/N^4 respectively for small p. We also show that the associated decay times tau_p ~ (N/p)^4 will not be observed if they exceed the orientational time scale tau_r ~ N^3 for an equally-long rigid rod, as the driven decay is then washed out by diffusive motion. △ Less

Submitted 3 December, 2012; originally announced December 2012.

Comments: 28 pages, 2 figures

Dynamical Eigenmodes of Star and Tadpole Polymers

Authors: Rick Keesman, Gerard T. Barkema, Debabrata Panja

Abstract: The dynamics of phantom bead-spring chains with the topology of a symmetric star with $f$ arms and tadpoles ($f=3$, a special case) is studied, in the overdamped limit. In the simplified case where the hydrodynamic radius of the central monomer is $f$ times as heavy as the other beads, we determine their dynamical eigenmodes exactly, along the lines of the Rouse modes for linear bead-spring chains… ▽ More The dynamics of phantom bead-spring chains with the topology of a symmetric star with $f$ arms and tadpoles ($f=3$, a special case) is studied, in the overdamped limit. In the simplified case where the hydrodynamic radius of the central monomer is $f$ times as heavy as the other beads, we determine their dynamical eigenmodes exactly, along the lines of the Rouse modes for linear bead-spring chains. These eigenmodes allow full analytical calculations of virtually any dynamical quantity. As examples we determine the radius of gyration, the mean square displacement of a tagged monomer, and, for star polymers, the autocorrelation function of the vector that spans from the center of the star to a bead on one of the arms. △ Less

Submitted 3 January, 2013; v1 submitted 2 October, 2012; originally announced October 2012.

Comments: 21 pages in double spacing preprint format, 5 figures, minor changes in the "Discussion" section, to appear in JSTAT

Journal ref: J. Stat. Mech. (2013) P02021

SAWdoubler: a program for counting self-avoiding walks

Authors: Raoul D. Schram, Gerard T. Barkema, Rob H. Bisseling

Abstract: This article presents SAWdoubler, a package for counting the total number Z(N) of self-avoiding walks (SAWs) on a regular lattice by the length-doubling method, of which the basic concept has been published previously by us. We discuss an algorithm for the creation of all SAWs of length N, efficient storage of these SAWs in a tree data structure, and an algorithm for the computation of correction… ▽ More This article presents SAWdoubler, a package for counting the total number Z(N) of self-avoiding walks (SAWs) on a regular lattice by the length-doubling method, of which the basic concept has been published previously by us. We discuss an algorithm for the creation of all SAWs of length N, efficient storage of these SAWs in a tree data structure, and an algorithm for the computation of correction terms to the count Z(2N) for SAWs of double length, removing all combinations of two intersecting single-length SAWs. We present an efficient numbering of the lattice sites that enables exploitation of symmetry and leads to a smaller tree data structure; this numbering is by increasing Euclidean distance from the origin of the lattice. Furthermore, we show how the computation can be parallelised by distributing the iterations of the main loop of the algorithm over the cores of a multicore architecture. Experimental results on the 3D cubic lattice demonstrate that Z(28) can be computed on a dual-core PC in only 1 hour and 40 minutes, with a speedup of 1.56 compared to the single-core computation and with a gain by using symmetry of a factor of 26. We present results for memory use and show how the computation is made to fit in 4 Gbyte RAM. It is easy to extend the SAWdoubler software to other lattices; it is publicly available under the GNU LGPL license. △ Less

Submitted 23 August, 2012; originally announced August 2012.

Comments: 29 pages, 3 figures

Critical exponents of the pair contact process with diffusion

Authors: R. D. Schram, G. T. Barkema

Abstract: We study the pair contact process with diffusion (PCPD) using Monte Carlo simulations, and concentrate on the decay of the particle density $ρ$ with time, near its critical point, which is assumed to follow $ρ(t) \approx ct^{-δ} +c_2t^{-δ_2}+...$. This model is known for its slow convergence to the asymptotic critical behavior; we therefore pay particular attention to finite-time corrections. We f… ▽ More We study the pair contact process with diffusion (PCPD) using Monte Carlo simulations, and concentrate on the decay of the particle density $ρ$ with time, near its critical point, which is assumed to follow $ρ(t) \approx ct^{-δ} +c_2t^{-δ_2}+...$. This model is known for its slow convergence to the asymptotic critical behavior; we therefore pay particular attention to finite-time corrections. We find that at the critical point, the ratio of $ρ$ and the pair density $ρ_p$ converges to a constant, indicating that both densities decay with the same powerlaw. We show that under the assumption $δ_2 \approx 2 δ$, two of the critical exponents of the PCPD model are $δ= 0.165(10)$ and $β= 0.31(4)$, consistent with those of the directed percolation (DP) model. △ Less

Submitted 22 February, 2012; originally announced February 2012.

Exact enumeration of self-avoiding walks

Authors: Raoul D. Schram, Gerard T. Barkema, Rob H. Bisseling

Abstract: A prototypical problem on which techniques for exact enumeration are tested and compared is the enumeration of self-avoiding walks. Here, we show an advance in the methodology of enumeration, making the process thousands or millions of times faster. This allowed us to enumerate self-avoiding walks on the simple cubic lattice up to a length of 36 steps. A prototypical problem on which techniques for exact enumeration are tested and compared is the enumeration of self-avoiding walks. Here, we show an advance in the methodology of enumeration, making the process thousands or millions of times faster. This allowed us to enumerate self-avoiding walks on the simple cubic lattice up to a length of 36 steps. △ Less

Submitted 12 April, 2011; originally announced April 2011.

Comments: 6 pages, 1 figure

MSC Class: 05A15; 82B41

Saturation of front propagation in a reaction-diffusion process describing plasma damage in porous low-k materials

Authors: Soghra Safaverdi, Gerard T. Barkema, Eddy Kunnen, Adam M. Urbanowicz, Christian Maes

Abstract: We propose a three-component reaction-diffusion system yielding an asymptotic logarithmic time-dependence for a moving interface. This is naturally related to a Stefan-problem for which both one-sided Dirichlet-type and von Neumann-type boundary conditions are considered. We integrate the dependence of the interface motion on diffusion and reaction parameters and we observe a change from transport… ▽ More We propose a three-component reaction-diffusion system yielding an asymptotic logarithmic time-dependence for a moving interface. This is naturally related to a Stefan-problem for which both one-sided Dirichlet-type and von Neumann-type boundary conditions are considered. We integrate the dependence of the interface motion on diffusion and reaction parameters and we observe a change from transport behavior and interface motion \sim t^1/2 to logarithmic behavior \sim ln t as a function of time. We apply our theoretical findings to the propagation of carbon depletion in porous dielectrics exposed to a low temperature plasma. This diffusion saturation is reached after about 1 minute in typical experimental situations of plasma damage in microelectronic fabrication. We predict the general dependencies on porosity and reaction rates. △ Less

Submitted 1 June, 2011; v1 submitted 15 February, 2011; originally announced February 2011.

Comments: Accepted for publication in Phys. Rev. B

Journal ref: Physical Review B. 83, 245320 (2011)

Structural modes of a polymer in the repton model

Authors: Gerard T. Barkema, Debabrata Panja, J. M. J. van Leeuwen

Abstract: Using extensive computer simulations, the behavior of the structural modes --- more precisely, the eigenmodes of a phantom Rouse polymer --- are characterized for a polymer in the three-dimensional repton model, and are used to study the polymer's dynamics at time scales well before the tube renewal. Although these modes are not the eigenmodes for a polymer in the repton model, we show that numeri… ▽ More Using extensive computer simulations, the behavior of the structural modes --- more precisely, the eigenmodes of a phantom Rouse polymer --- are characterized for a polymer in the three-dimensional repton model, and are used to study the polymer's dynamics at time scales well before the tube renewal. Although these modes are not the eigenmodes for a polymer in the repton model, we show that numerically the modes maintain a high degree of statistical independence. The correlations in the mode amplitudes decay exponentially with $(p/N)^2A(t)$, in which $p$ is the mode number, $N$ is the polymer length and $A(t)$ is a single function shared by all modes. In time, the quantity $A(t)$ causes an exponential decay for the mode amplitude correlation functions for times $<1$; a stretched exponential with an exponent 1/2 between times 1 and $τ_R\sim N^2$, the time-scale for diffusion of tagged reptons along the contour of the polymer; and again an exponential decay for times $t>τ_R$. Having assumed statistical independence and the validity of a single function $A(t)$ for all modes, we compute the temporal behavior of three structural quantities: the vectorial distance between the positions of the middle monomer and the center-of-mass, the end-to-end vector, and the vector connecting two nearby reptons around the middle of the polymer. Furthermore, we study the mean-squared displacement of the center-of-mass and the middle repton, and their relation with the temporal behavior of the modes. △ Less

Submitted 29 March, 2011; v1 submitted 7 February, 2011; originally announced February 2011.

Comments: 21 pages in double spacing, 7 figures, minimal changes, to appear in J. Chem. Phys

Journal ref: J. Chem. Phys. 134, 154901 (2011)

Unwinding dynamics of double-stranded polymers

Authors: M. Baiesi, G. T. Barkema, E. Carlon, D. Panja

Abstract: We consider the unwinding of two lattice polymer strands of length N that are initially wound around each other in a double-helical conformation and evolve through Rouse dynamics. The problem relates to quickly bringing a double-stranded polymer well above its melting temperature, i.e., the binding interactions between the strands are neglected, and the strands separate from each other as it is en… ▽ More We consider the unwinding of two lattice polymer strands of length N that are initially wound around each other in a double-helical conformation and evolve through Rouse dynamics. The problem relates to quickly bringing a double-stranded polymer well above its melting temperature, i.e., the binding interactions between the strands are neglected, and the strands separate from each other as it is entropically favorable for them to do so. The strands unwind by rotating around each other until they separate. We find that the process proceeds from the ends inward; intermediate conformations can be characterized by a tightly wound inner part, from which loose strands are sticking out, with length l~t^0.39. The total time needed for the two strands to unwind scales as a power of N as tu~N^(2.57+-0.03). We present a theoretical argument, which suggests that during this unwinding process, these loose strands are far out of equilibrium. △ Less

Submitted 22 October, 2010; originally announced October 2010.

Comments: 12 pages, 4 figures

Journal ref: J. Chem. Phys. 133, 154907 (2010)

Semiflexible Filamentous Composites

Authors: Elisabeth M. Huisman, Claus Heussinger, Cornelis Storm, Gerard T. Barkema

Abstract: Inspired by the ubiquity of composite filamentous networks in nature we investigate models of biopolymer networks that consist of interconnected floppy and stiff filaments. Numerical simulations carried out in three dimensions allow us to explore the microscopic partitioning of stresses and strains between the stiff and floppy fractions c_s and c_f, and reveal a non-trivial relationship between th… ▽ More Inspired by the ubiquity of composite filamentous networks in nature we investigate models of biopolymer networks that consist of interconnected floppy and stiff filaments. Numerical simulations carried out in three dimensions allow us to explore the microscopic partitioning of stresses and strains between the stiff and floppy fractions c_s and c_f, and reveal a non-trivial relationship between the mechanical behavior and the relative fraction of stiff polymer: when there are few stiff polymers, non-percolated stiff ``inclusions`` are protected from large deformations by an encompassing floppy matrix, while at higher fractions of stiff material the stiff network is independently percolated and dominates the mechanical response. △ Less

Submitted 30 August, 2010; originally announced August 2010.

Comments: Phys. Rev. Lett, to appear (4 pages, 2 figures)

Elastic Lattice Polymers

Authors: Marco Baiesi, Gerard T. Barkema, Enrico Carlon

Abstract: We study a model of "elastic" lattice polymer in which a fixed number of monomers $m$ is hosted by a self-avoiding walk with fluctuating length $l$. We show that the stored length density $ρ_m = 1 - <l>/m$ scales asymptotically for large $m$ as $ρ_m=ρ_\infty(1-θ/m + ...)$, where $θ$ is the polymer entropic exponent, so that $θ$ can be determined from the analysis of $ρ_m$. We perform simulations f… ▽ More We study a model of "elastic" lattice polymer in which a fixed number of monomers $m$ is hosted by a self-avoiding walk with fluctuating length $l$. We show that the stored length density $ρ_m = 1 - <l>/m$ scales asymptotically for large $m$ as $ρ_m=ρ_\infty(1-θ/m + ...)$, where $θ$ is the polymer entropic exponent, so that $θ$ can be determined from the analysis of $ρ_m$. We perform simulations for elastic lattice polymer loops with various sizes and knots, in which we measure $ρ_m$. The resulting estimates support the hypothesis that the exponent $θ$ is determined only by the number of prime knots and not by their type. However, if knots are present, we observe strong corrections to scaling, which help to understand how an entropic competition between knots is affected by the finite length of the chain. △ Less

Submitted 15 June, 2010; originally announced June 2010.

Comments: 10 pages

Journal ref: Phys. Rev. E 81, 061801 (2010)

Simulations of Two-Dimensional Unbiased Polymer Translocation Using the Bond Fluctuation Model

Authors: Debabrata Panja, Gerard T. Barkema

Abstract: We use the Bond Fluctuation Model (BFM) to study the pore-blockade times of a translocating polymer of length $N$ in two dimensions, in the absence of external forces on the polymer (i.e., unbiased translocation) and hydrodynamic interactions (i.e., the polymer is a Rouse polymer), through a narrow pore. Earlier studies using the BFM concluded that the pore-blockade time scales with polymer leng… ▽ More We use the Bond Fluctuation Model (BFM) to study the pore-blockade times of a translocating polymer of length $N$ in two dimensions, in the absence of external forces on the polymer (i.e., unbiased translocation) and hydrodynamic interactions (i.e., the polymer is a Rouse polymer), through a narrow pore. Earlier studies using the BFM concluded that the pore-blockade time scales with polymer length as $τ_d \sim N^β$, with $β=1+2ν$, whereas some recent studies with different polymer models produce results consistent with $β=2+ν$, originally predicted by us. Here $ν$ is the Flory exponent of the polymer; $ν=0.75$ in 2D. In this paper we show that for the BFM if the simulations are extended to longer polymers, the purported scaling $τ_d \sim N^{1+2ν}$ ceases to hold. We characterize the finite-size effects, and study the mobility of individual monomers in the BFM. In particular, we find that in the BFM, in the vicinity of the pore the individual monomeric mobilities are heavily suppressed in the direction perpendicular to the membrane. After a modification of the BFM which counters this suppression (but possibly introduces other artifacts in the dynamics), the apparent exponent $β$ increases significantly. Our conclusion is that BFM simulations do not rule out our theoretical prediction for unbiased translocation, namely $β=2+ν$. △ Less

Submitted 5 January, 2010; v1 submitted 9 December, 2009; originally announced December 2009.

Comments: minor proofreading corrections, 23 pages (double spacing), 7 figures, published version

Journal ref: J. Chem. Phys. 132, 014902 (2010)

Linear model for fast background subtraction in oligonucleotide microarrays

Authors: K. Myriam Kroll, Gerard T. Barkema, Enrico Carlon

Abstract: One important preprocessing step in the analysis of microarray data is background subtraction. In high-density oligonucleotide arrays this is recognized as a crucial step for the global performance of the data analysis from raw intensities to expression values. We propose here an algorithm for background estimation based on a model in which the cost function is quadratic in a set of fitting pa… ▽ More One important preprocessing step in the analysis of microarray data is background subtraction. In high-density oligonucleotide arrays this is recognized as a crucial step for the global performance of the data analysis from raw intensities to expression values. We propose here an algorithm for background estimation based on a model in which the cost function is quadratic in a set of fitting parameters such that minimization can be performed through linear algebra. The model incorporates two effects: 1) Correlated intensities between neighboring features in the chip and 2) sequence-dependent affinities for non-specific hybridization fitted by an extended nearest-neighbor model. The algorithm has been tested on 360 GeneChips from publicly available data of recent expression experiments. The algorithm is fast and accurate. Strong correlations between the fitted values for different experiments as well as between the free-energy parameters and their counterparts in aqueous solution indicate that the model captures a significant part of the underlying physical chemistry. △ Less

Submitted 7 December, 2009; originally announced December 2009.

Comments: 21 pages, 5 figures

Journal ref: Algorithms for Molecular Biology 2009, 4:15

Rouse Modes of Self-avoiding Flexible Polymers

Authors: Debabrata Panja, Gerard T. Barkema

Abstract: Using a lattice-based Monte Carlo code for simulating self-avoiding flexible polymers in three dimensions in the absence of explicit hydrodynamics, we study their Rouse modes. For self-avoiding polymers, the Rouse modes are not expected to be statistically independent; nevertheless, we demonstrate that numerically these modes maintain a high degree of statistical independence. Based on high-prec… ▽ More Using a lattice-based Monte Carlo code for simulating self-avoiding flexible polymers in three dimensions in the absence of explicit hydrodynamics, we study their Rouse modes. For self-avoiding polymers, the Rouse modes are not expected to be statistically independent; nevertheless, we demonstrate that numerically these modes maintain a high degree of statistical independence. Based on high-precision simulation data we put forward an approximate analytical expression for the mode amplitude correlation functions for long polymers. From this, we derive analytically and confirm numerically several scaling properties for self-avoiding flexible polymers, such as (i) the real-space end-to-end distance, (ii) the end-to-end vector correlation function, (iii) the correlation function of the small spatial vector connecting two nearby monomers at the middle of a polymer, and (iv) the anomalous dynamics of the middle monomer. Importantly, expanding on our recent work on the theory of polymer translocation, we also demonstrate that the anomalous dynamics of the middle monomer can be obtained from the forces it experiences, by the use of the fluctuation-dissipation theorem. △ Less

Submitted 16 October, 2009; v1 submitted 20 August, 2009; originally announced August 2009.

Comments: 16 pages (double spaced), 5 figures, small changes and corrections, to appear in J. Chem. Phys

Journal ref: J. Chem. Phys. 131, 154903 (2009).

Non-Markovian dynamics of clusters during nucleation

Authors: J. Kuipers, G. T. Barkema

Abstract: Most theories of homogeneous nucleation are based on a Fokker-Planck-like description of the behavior of the mass of clusters. Here we will show that these approaches are incomplete for a large class of nucleating systems, as they assume the effective dynamics of the clusters to be Markovian, i.e., memoryless. We characterize these non-Markovian dynamics and show how this influences the dynamics… ▽ More Most theories of homogeneous nucleation are based on a Fokker-Planck-like description of the behavior of the mass of clusters. Here we will show that these approaches are incomplete for a large class of nucleating systems, as they assume the effective dynamics of the clusters to be Markovian, i.e., memoryless. We characterize these non-Markovian dynamics and show how this influences the dynamics of clusters during nucleation. Our results are validated by simulations of a three-dimensional Ising model with locally conserved magnetization. △ Less

Submitted 11 May, 2009; originally announced May 2009.

Comments: 4 pages, 4 figures

Non-Equilibrium Dynamics of Single polymer Adsorption to Solid Surfaces

Authors: Debabrata Panja, Gerard T. Barkema, Anatoly B. Kolomeisky

Abstract: Adsorption of polymers to surfaces is crucial for understanding many fundamental processes in nature. Recent experimental studies indicate that the adsorption dynamics is dominated by non-equilibrium effects. We investigate the adsorption of a single polymer of length $N$ to a planar solid surface in the absence of hydrodynamic interactions. We find that for weak adsorption energies the adsorpti… ▽ More Adsorption of polymers to surfaces is crucial for understanding many fundamental processes in nature. Recent experimental studies indicate that the adsorption dynamics is dominated by non-equilibrium effects. We investigate the adsorption of a single polymer of length $N$ to a planar solid surface in the absence of hydrodynamic interactions. We find that for weak adsorption energies the adsorption time scales $ \sim N^{(1+2ν)/(1+ν)}$, where $ν$ is the Flory exponent for the polymer. We argue that in this regime the single chain adsorption is closely related to a field-driven polymer translocation through narrow pores. Surprisingly, for high adsorption energies the adsorption time becomes longer, as it scales $\sim N^{(1+ν)}$, which is explained by strong stretching of the unadsorbed part of the polymer close to the adsorbing surface. These two dynamic regimes are separated by an energy scale that is characterised by non-equilibrium contributions during the adsorption process. △ Less

Submitted 25 April, 2009; v1 submitted 1 September, 2008; originally announced September 2008.

Comments: 11 pages, 3 figures, 1 table, substantial added material, to appear in J. Phys.: Condens. Matter as a Fast Track Communication

Journal ref: J. Phys.: Condens. Matter 21, 242101 (2009)

Monte Carlo studies of extensions of the Blume-Emery-Griffiths model

Authors: C. C. Loois, G. T. Barkema, C. Morais Smith

Abstract: We extend the Blume-Emery-Griffiths (BEG) model to a two-component BEG model in order to study 2D systems with two order parameters, such as magnetic superconductors or two-component Bose-Einstein condensates. The model is investigated using Monte Carlo simulations, and the temperature-concentration phase diagram is determined in the presence and absence of an external magnetic field. This model… ▽ More We extend the Blume-Emery-Griffiths (BEG) model to a two-component BEG model in order to study 2D systems with two order parameters, such as magnetic superconductors or two-component Bose-Einstein condensates. The model is investigated using Monte Carlo simulations, and the temperature-concentration phase diagram is determined in the presence and absence of an external magnetic field. This model exhibits a rich phase diagram, including a second-order transition to a phase where superconductivity and magnetism coexist. Results are compared with experiments on Cerium-based heavy-fermion superconductors. To study cold atom mixtures, we also simulate the BEG and two-component BEG models with a trap** potential. In the BEG model with a trap, there is no longer a first order transition to a true phase-separated regime, but a crossover to a kind of phase-separated region. The relation with imbalanced fermi-mixtures is discussed. We present the phase diagram of the two-component BEG model with a trap, which can describe boson-boson mixtures of cold atoms. Although there are no experimental results yet for the latter, we hope that our predictions could help to stimulate future experiments in this direction. △ Less

Submitted 15 August, 2008; originally announced August 2008.

Comments: 9 pages, 12 figures

Monte Carlo study of multiply crosslinked semiflexible polymer networks

Authors: E. M. Huisman, C. Storm, G. T. Barkema

Abstract: We present a method to generate realistic, three-dimensional networks of crosslinked semiflexible polymers. The free energy of these networks is obtained from the force-extension characteristics of the individual polymers and their persistent directionality through the crosslinks. A Monte Carlo scheme is employed to obtain isotropic, homogeneous networks that minimize the free energy, and for wh… ▽ More We present a method to generate realistic, three-dimensional networks of crosslinked semiflexible polymers. The free energy of these networks is obtained from the force-extension characteristics of the individual polymers and their persistent directionality through the crosslinks. A Monte Carlo scheme is employed to obtain isotropic, homogeneous networks that minimize the free energy, and for which all of the relevant parameters can be varied: the persistence length, the contour length as well as the crosslinking length may be chosen at will. We also provide an initial survey of the mechanical properties of our networks subjected to shear strains, showing them to display the expected non-linear stiffening behavior. Also, a key role for non-affinity and its relation to order in the network is uncovered. △ Less

Submitted 2 October, 2008; v1 submitted 4 July, 2008; originally announced July 2008.

Comments: 11 pages, revised figures, added extra information about the networks

Local Strain Relaxation Dictates Polymer Melt Viscosity

Authors: Gerard T. Barkema, Debabrata Panja

Abstract: This paper has been withdrawn due to conflicts with journal copyright issues. This paper has been withdrawn due to conflicts with journal copyright issues. △ Less

Submitted 25 April, 2008; v1 submitted 24 April, 2008; originally announced April 2008.

Comments: This paper has been withdrawn due to conflicts with journal copyright issues

Unbiased computation of transition times by pathway recombination

Authors: J. Kuipers, G. T. Barkema

Abstract: In many systems, the time scales of the microscopic dynamics and macroscopic dynamics of interest are separated by many orders of magnitude. Examples abound, for instance nucleation, protein folding, and chemical reactions. For these systems, direct simulation of phase space trajectories does not efficiently determine most physical quantities of interest. The last decade has seen the advent of m… ▽ More In many systems, the time scales of the microscopic dynamics and macroscopic dynamics of interest are separated by many orders of magnitude. Examples abound, for instance nucleation, protein folding, and chemical reactions. For these systems, direct simulation of phase space trajectories does not efficiently determine most physical quantities of interest. The last decade has seen the advent of methods circumventing brute force simulation. For most dynamical quantities, these methods all share the drawback of systematical errors. We present a novel method for generating ensembles of phase space trajectories. By sampling small pieces of these trajectories in different phase space domains and piecing them together in a smart way using equilibrium properties, we obtain physical quantities such as transition times. This method does not have any systematic error and is very efficient; the computational effort to calculate the first passage time across a free energy barrier does not increase with the height of the barrier. The strength of the method is shown in the Ising model. Accurate measurements of nucleation times span almost ten orders of magnitude and reveal corrections to classical nucleation theory. △ Less

Submitted 28 February, 2008; originally announced February 2008.

Comments: 8 pages, 4 figures

Report number: ITP-UU-08/11