-
Morphology and structural properties of thin rubrene crystallites grown on graphite
Authors:
Moha Naeimi,
Katharina Engster,
Ingo Barke,
Sylvia Speller
Abstract:
Crystallization of rubrene, progressing from an amorphous phase to a triclinic meta-stable and ultimately to the orthorhombic stable phase, offers broad applications not only in organic electronic devices but also for in-depth studies of optical and electronic properties, including exciton distribution and dynamics. We investigate the crystallization of rubrene on highly oriented pyrolytic graphit…
▽ More
Crystallization of rubrene, progressing from an amorphous phase to a triclinic meta-stable and ultimately to the orthorhombic stable phase, offers broad applications not only in organic electronic devices but also for in-depth studies of optical and electronic properties, including exciton distribution and dynamics. We investigate the crystallization of rubrene on highly oriented pyrolytic graphite (HOPG), aiming at the growth of the preferred rubrene orthorhombic phase, which has been reported to have one of the highest charge mobilities in organic semiconductors. This is achieved through controlled heating and enhanced partial pressure. Through precise control of the initial deposition on the substrate, we investigate the growth habit of rubrene crystals by high-rate heat treatment beyond the second crystallization temperature. Furthermore, this work addresses thermal stability and photodegradation across various morphologies.
△ Less
Submitted 22 April, 2024;
originally announced April 2024.
-
Evaluating the performance of ionic liquid coatings for mitigation of spacecraft surface charges
Authors:
M. Wendt,
R. Lange,
F. Dorn,
J. Berdermann,
I. Barke,
S. Speller
Abstract:
To reduce the impact of charging effects on satellites, cheap and lightweight conductive coatings are desirable. We mimic space-like charging environments in ultra-high vacuum (UHV) chambers during deposition of charges via the electron beam of a scanning electron microscope (SEM). We use the charge induced signatures in SEM images of a thin ionic liquid (IL) film on insulating surfaces such as gl…
▽ More
To reduce the impact of charging effects on satellites, cheap and lightweight conductive coatings are desirable. We mimic space-like charging environments in ultra-high vacuum (UHV) chambers during deposition of charges via the electron beam of a scanning electron microscope (SEM). We use the charge induced signatures in SEM images of a thin ionic liquid (IL) film on insulating surfaces such as glass, to assess the general performance of such coatings. In order to get a reference structure in SEM, the samples were structured by nanosphere lithography and coated with IL. The IL film (we choose BMP DCA, due to its beneficial physical properties) was applied ex situ and a thickness of 10 to 30 nm was determined by reflectometry. Such an IL film is stable under vacuum conditions. It would also only lead to additional mass of below 20 mg/m$^2$. At about 5 A/m$^2 \approx 3\cdot10^{19}$ e/(s$\cdot$m$^2$), a typical sample charging rate in SEM, imaging is possible with no noticeable contrast changes over many hours; this electron current density is already 6 orders of magnitudes higher than "worst case geosynchronous environments" of $3\cdot10^{-6}$ A/m$^2$. Measurements of the surface potential are used for further insights in the reaction of IL films to the electron beam of a SEM. Participating mechanisms such as polarization or reorientation will are discussed.
△ Less
Submitted 4 September, 2023;
originally announced September 2023.
-
Melting, bubble-like expansion and explosion of superheated plasmonic nanoparticles
Authors:
Simon Dold,
Thomas Reichenbach,
Alessandro Colombo,
Jakob Jordan,
Ingo Barke,
Patrick Behrens,
Nils Bernhardt,
Jonathan Correa,
Stefan Düsterer,
Benjamin Erk,
Thomas Fennel,
Linos Hecht,
Andrea Heilrath,
Robert Irsig,
Norman Iwe,
Patrice Kolb,
Björn Kruse,
Bruno Langbehn,
Bastian Manschwetus,
Philipp Marienhagen,
Franklin Martinez,
Karl-Heinz Meiwes Broer,
Kevin Oldenburg,
Christopher Passow,
Christian Peltz
, et al. (10 additional authors not shown)
Abstract:
We report on time-resolved coherent diffraction imaging of gas-phase silver nanoparticles, strongly heated via their plasmon resonance. The x-ray diffraction images reveal a broad range of phenomena for different excitation strengths, from simple melting over strong cavitation to explosive disintegration. Molecular dynamics simulations fully reproduce this behavior and show that the heating induce…
▽ More
We report on time-resolved coherent diffraction imaging of gas-phase silver nanoparticles, strongly heated via their plasmon resonance. The x-ray diffraction images reveal a broad range of phenomena for different excitation strengths, from simple melting over strong cavitation to explosive disintegration. Molecular dynamics simulations fully reproduce this behavior and show that the heating induces rather similar trajectories through the phase diagram in all cases, with the very different outcomes being due only to whether and where the stability limit of the metastable superheated liquid is crossed.
△ Less
Submitted 1 September, 2023;
originally announced September 2023.
-
Three-Dimensional Coherent Diffractive Imaging of Isolated Faceted Nanostructures
Authors:
Alessandro Colombo,
Simon Dold,
Patrice Kolb,
Nils Bernhardt,
Patrick Behrens,
Jonathan Correa,
Stefan Düsterer,
Benjamin Erk,
Linos Hecht,
Andrea Heilrath,
Robert Irsig,
Norman Iwe,
Jakob Jordan,
Björn Kruse,
Bruno Langbehn,
Bastian Manschwetus,
Franklin Martinez,
Karl-Heinz Meiwes-Broer,
Kevin Oldenburg,
Christopher Passow,
Christian Peltz,
Mario Sauppe,
Fabian Seel,
Rico Mayro P. Tanyag,
Rolf Treusch
, et al. (7 additional authors not shown)
Abstract:
The structure and dynamics of isolated nanosamples in free flight can be directly visualized via single-shot coherent diffractive imaging using the intense and short pulses of X-ray free-electron lasers. Wide-angle scattering images even encode three-dimensional morphological information of the samples, but the retrieval of this information remains a challenge. Up to now, effective three-dimension…
▽ More
The structure and dynamics of isolated nanosamples in free flight can be directly visualized via single-shot coherent diffractive imaging using the intense and short pulses of X-ray free-electron lasers. Wide-angle scattering images even encode three-dimensional morphological information of the samples, but the retrieval of this information remains a challenge. Up to now, effective three-dimensional morphology reconstructions from single shots were only achieved via fitting with highly constrained models, requiring a priori knowledge about possible geometrical shapes. Here we present a much more generic imaging approach. Relying on a model that allows for any sample morphology described by a convex polyhedron, we reconstruct wide-angle diffraction patterns from individual silver nanoparticles. In addition to known structural motives with high symmetries, we retrieve imperfect shapes and agglomerates which were not accessible previously. Our results open new routes towards true 3D structure determination of single nanoparticles and, ultimately, 3D movies of ultrafast nanoscale dynamics.
△ Less
Submitted 8 August, 2022;
originally announced August 2022.
-
The Scatman: an approximate method for fast wide-angle scattering simulations
Authors:
Alessandro Colombo,
Julian Zimmermann,
Bruno Langbehn,
Thomas Moller,
Christian Peltz,
Katharina Sander,
Bjorn Kruse,
Paul Tummler,
Ingo Barke,
Daniela Rupp,
Thomas Fennel
Abstract:
Single-shot Coherent Diffraction Imaging (CDI) is a powerful approach to characterize the structure and dynamics of isolated nanoscale objects such as single viruses, aerosols, nanocrystals or droplets. Using X-ray wavelengths, the diffraction images in CDI experiments usually cover only small scattering angles of few degrees. These small-angle patterns represent the magnitude of the Fourier trans…
▽ More
Single-shot Coherent Diffraction Imaging (CDI) is a powerful approach to characterize the structure and dynamics of isolated nanoscale objects such as single viruses, aerosols, nanocrystals or droplets. Using X-ray wavelengths, the diffraction images in CDI experiments usually cover only small scattering angles of few degrees. These small-angle patterns represent the magnitude of the Fourier transform of the two-dimensional projection of the sample's electron density, which can be reconstructed efficiently but lacks any depth information. In cases where the diffracted signal can be measured up to scattering angles exceeding 10 degrees, i.e. in the wide-angle regime, three-dimensional morphological information of the target is contained in a single-shot diffraction pattern. However, the extraction of the 3D structural information is no longer straightforward and defines the key challenge in wide-angle CDI. So far, the most convenient approach relies on iterative forward fitting of the scattering pattern using scattering simulations. Here we present the Scatman, an approximate and fast numerical tool for the simulation and iterative fitting of wide-angle scattering images of isolated samples. Furthermore, we publish and describe in detail our Open Source software implementation of the Scatman algorithm, PyScatman. The Scatman approach yields quantitative results for weakly scattering samples. PyScatman is capable of computing wide-angle scattering patterns in few milliseconds even on consumer-level computing hardware. The high computational efficiency of PyScatman enables effective data analysis based on model fitting, thus representing an important step towards a systematic application of 3D Coherent Diffraction Imaging from single wide-angle diffraction patterns in various scientific communities.
△ Less
Submitted 7 February, 2022;
originally announced February 2022.
-
The nanomorphology of cell surfaces of adhered osteoblasts
Authors:
C. Voelkner,
M. Wendt,
R. Lange,
M. Ulbrich,
M. Gruening,
S. Staehlke,
J. B. Nebe,
I. Barke,
S. Speller
Abstract:
Functionality of living cells is inherently linked to subunits with dimensions on the nanoscale. In case of osteoblasts the cell surface plays a particularly important role for adhesion and spreading which are crucial properties with regard to bone implants. Here we present a comprehensive characterization of the 3D nanomorphology of living as well as fixed osteoblastic cells using scanning ion co…
▽ More
Functionality of living cells is inherently linked to subunits with dimensions on the nanoscale. In case of osteoblasts the cell surface plays a particularly important role for adhesion and spreading which are crucial properties with regard to bone implants. Here we present a comprehensive characterization of the 3D nanomorphology of living as well as fixed osteoblastic cells using scanning ion conductance microscopy (SICM) which is a nanoprobing method largely avoiding forces. Dynamic ruffles are observed, manifesting themselves in characteristic membrane protrusions. They contribute to the overall surface corrugation which we systematically study by introducing the relative 3D excess area as a function of projected adhesion area. A clear anticorrelation is found upon analysis of ~40 different cells on glass as well as on amine covered surfaces. At the rim of lamellipodia characteristic edge heights between 100 nm and ~300 nm are observed. Power spectral densities of membrane fluctuations show frequency-dependent decay exponents in excess of -2 on living osteoblasts. We discuss the capability of apical membrane features and fluctuation dynamics in aiding assessment of adhesion and migration properties on a single-cell basis.
△ Less
Submitted 27 November, 2020; v1 submitted 16 November, 2020;
originally announced November 2020.
-
Correlative Microscopy of Morphology and Luminescence of Cu porphyrin aggregates
Authors:
M. Bahrami,
S. Kraft,
J. Becker,
H. Hartmann,
B. Vogler,
K. Wardelmann,
H. Behle,
J. A. A. W. Elemans,
I. Barke,
S. Speller
Abstract:
Transfer of energy and information through molecule aggregates requires as one important building block anisotropic, cable-like structures. Knowledge on the spatial correlation of luminescence and morphology represents a prerequisite in the understanding of internal processes and will be important for architecting suitable landscapes. In this context we study the morphology, fluorescence and phosp…
▽ More
Transfer of energy and information through molecule aggregates requires as one important building block anisotropic, cable-like structures. Knowledge on the spatial correlation of luminescence and morphology represents a prerequisite in the understanding of internal processes and will be important for architecting suitable landscapes. In this context we study the morphology, fluorescence and phosphorescence of molecule aggregate structures on surfaces in a spatially correlative way. We consider as two morphologies, lengthy strands and isotropic islands. It turns out that phosphorescence is quite strong compared to fluorescence and the spatial variation of the observed intensities is largely in line with the amount of dye. However in proportion, the strands exhibit more fluorescence than the isotropic islands suggesting weaker non-radiative channels. The ratio fluorescence to phosphorescence appears to be correlated with the degree of aggregation or internal order. The heights at which luminescence saturates is explained in the context of attenuation and emission multireflection, inside the dye. This is supported by correlative photoemission electron microscopy which is more sensitive to the surface region. The lengthy structures exhibit a pronounced polarization dependence of the luminescence with a relative dichroism up to about 60%, revealing substantial perpendicular orientation preference of the molecules with respect to the substrate and parallel with respect to the strands.
△ Less
Submitted 20 September, 2017;
originally announced September 2017.
-
Current-Dependent Periodicities of Si(553)-Au
Authors:
S. Polei,
P. C. Snijders,
K. -H. Meiwes Broer,
I. Barke
Abstract:
We investigate quasi one-dimensional atomic chains on Si(553)-Au with a scanning tunneling microscope (STM). The observed periodicity at the Si step edge can be altered by the STM and depends on the magnitude of the tunneling current. In a recent report this reversible structural transition was attributed to transient do** with a characteristic time scale of a few milliseconds. Here we explore t…
▽ More
We investigate quasi one-dimensional atomic chains on Si(553)-Au with a scanning tunneling microscope (STM). The observed periodicity at the Si step edge can be altered by the STM and depends on the magnitude of the tunneling current. In a recent report this reversible structural transition was attributed to transient do** with a characteristic time scale of a few milliseconds. Here we explore the evolution of the STM topography as a function of the magnitude of the tunneling current for a wide temperature range. Based on a decomposition of topographic line profiles and a detailed Fourier analysis we conclude that all observed currentdependent STM topographies can be explained by a time-averaged linear combination of two fluctuating step-edge structures. These data also reveal the precise relative alignment of the characteristic STM features for both phases along the step edges. A simple diagram is developed, presenting the relative contribution of these phases to the STM topography as a function of tunneling current and temperature. Time- and current-dependent measurements of fluctuations in the tunneling current reveal two different transition regimes that are related to two specific current injection locations within the surface unit cell. A method based on spatially resolved I(z)curves is presented that enables a quantitative analysis of contributing phases.
△ Less
Submitted 20 May, 2014; v1 submitted 26 February, 2014;
originally announced February 2014.
-
Structure and energetics of Si(111)-(5x2)-Au
Authors:
Steven C. Erwin,
Ingo Barke,
F. J. Himpsel
Abstract:
We propose a new structural model for the Si(111)-(5x2)-Au reconstruction. The model incorporates a new experimental value of 0.6 monolayer for the coverage of gold atoms, equivalent to six gold atoms per 5x2 cell. Five main theoretical results, obtained from first-principles total-energy calculations, support the model. (1) In the presence of silicon adatoms the periodicity of the gold rows spo…
▽ More
We propose a new structural model for the Si(111)-(5x2)-Au reconstruction. The model incorporates a new experimental value of 0.6 monolayer for the coverage of gold atoms, equivalent to six gold atoms per 5x2 cell. Five main theoretical results, obtained from first-principles total-energy calculations, support the model. (1) In the presence of silicon adatoms the periodicity of the gold rows spontaneously doubles, in agreement with experiment. (2) The dependence of the surface energy on the adatom coverage indicates that a uniformly covered phase is unstable and will phase-separate into empty and covered regions, as observed experimentally. (3) Theoretical scanning tunneling microscopy images are in excellent agreement with experiment. (4) The calculated band structure is consistent with angle-resolved photoemission spectra; analysis of their correspondence allows the straightforward assignment of observed surface states to specific atoms. (5) The calculated activation barrier for diffusion of silicon adatoms along the row direction is in excellent agreement with the experimentally measured barrier.
△ Less
Submitted 9 September, 2009;
originally announced September 2009.
