-
Vehicle Intrusion And Theft Control System Using GSM and GPS -- An advance and viable approach
Authors:
Ashad Mustafa,
Hassan Jameel,
Mohtashim Baqar,
Rameez Ahmed Khan,
Zeeshan M Yaqoob,
Zeeshan Rahim,
Syed Safdar Hussain
Abstract:
This paper presents a novel approach towards the designing and development of a feasible and an embedded vehicle intrusion and theft control system using GSM (Global System for Mobile Communication) and GPS (Global Positioning System). The proposed system uses GSM technology as one of the distinguishing building blocks of the system. A GPS module Holux GR89 is used to trace the position of the veh…
▽ More
This paper presents a novel approach towards the designing and development of a feasible and an embedded vehicle intrusion and theft control system using GSM (Global System for Mobile Communication) and GPS (Global Positioning System). The proposed system uses GSM technology as one of the distinguishing building blocks of the system. A GPS module Holux GR89 is used to trace the position of the vehicle and Mercury Switches are used to collect analog data continuously, in case of an intrusion, variations will be observed in sensors reading. Continuous readings from sensors are collected on to the microcontroller constantly and on the basis of those readings decision is taken whether an intrusion is made or not and in case of an intrusion a message from a predefined set of messages is generated to the owner of the vehicle and on reception of the message, the owner will have the luxury to take an action via an SMS either to lock the gears of the vehicle or seize the engine of the vehicle from a far-off place. A relay is used to control gears and engine of the vehicle while working with the microcontroller. A prototype system was built and tested. The results were very positive and encouraging.
△ Less
Submitted 9 April, 2020;
originally announced April 2020.
-
Design and Implementation of a DTMF Based Pick and Place Robotic Arm
Authors:
Muhammad Hassan,
Mohtashim Baqar
Abstract:
In recent times, developments in field of communication and robotics has progressed with leaps and bounds. In addition, the blend of both disciplines has contributed heavily in making human life easier and better. So in this work while making use of both the aforementioned technologies, a procedure for design and implementation of a mobile operated mechanical arm is proposed, that is, the proposed…
▽ More
In recent times, developments in field of communication and robotics has progressed with leaps and bounds. In addition, the blend of both disciplines has contributed heavily in making human life easier and better. So in this work while making use of both the aforementioned technologies, a procedure for design and implementation of a mobile operated mechanical arm is proposed, that is, the proposed arm will be operated via a cellular device that connects with the receiver mounted on the robotic arm. Moreover, over the duration of a call, if any key is pressed from the cellular device than an indicator indistinct to the key pressed is noticed at the receiver side. This tone represents superimposition of two distinct frequencies and referred to as DTMF (dual tone multi-frequency). Further, the mechanical arm is handled via the DTMF tone. Also, the acquired tone at the receiver is taken into a micro-controller (ATMEGA16) using the DTMF decipher module i.e. MT8870. Further, the decipher module unwinds the DTMF signal into its corresponding two bit representation and then the matched number is transmitted to the micro-controller. The micro-controller is programmed to take an action based on the decoded value. Further, the micro-controller forwards control signals to the motor driver unit to move the arm in forward/backward or multi-directional course. Lastly, the mechanical arm is capable of picking and placing objects while being controlled wirelessly over GSM (Global System for Mobile Communications).
△ Less
Submitted 9 April, 2020;
originally announced April 2020.
-
Brain Interface Based Wheel Chair Control System for Handicap -- An advance and viable approach
Authors:
Mohtashim Baqar,
Azfar Ghani,
Azeem Aftab,
Shahzad Karim Khawar
Abstract:
This paper presents advancement towards making an efficient and viable wheel chair control system based on brain computer interface via electro-oculogram (EOG) signals. The system utilizes the movement of eye as the element of purpose for controlling the movement of the wheel chair. Skin-surface electrodes are placed over skin for the purpose of acquiring the electro-oculogram signal and with the…
▽ More
This paper presents advancement towards making an efficient and viable wheel chair control system based on brain computer interface via electro-oculogram (EOG) signals. The system utilizes the movement of eye as the element of purpose for controlling the movement of the wheel chair. Skin-surface electrodes are placed over skin for the purpose of acquiring the electro-oculogram signal and with the help of differential amplifier the bio-potential is measured between the reference and the point of interest, afterwards these obtained low voltage pulses are amplified, then passed through a sallen-key filter for noise removal and smoothening. These pulses are then collected on to the micro-controller; based on these pulses motor is switched to move in either right or left direction. A prototype system was developed and tested. The system showed promising results. The test conducted showed 99.5% efficiency of movement in correct direction.
△ Less
Submitted 9 April, 2020;
originally announced April 2020.
-
Adopting E-commerce to User's Needs
Authors:
Mohammad Alshehri,
Hamza Aldabbas,
James Sawle,
Mai Abu Baqar
Abstract:
The objectives of this paper are to identify and analyse the extent to which the site is fulfilling all the user's requirements and needs. The related works comprise the history of interactive design and the benefits of user-centered development, which is the methodology followed in this survey. Moreover, there is a brief comparison between Waterfall and User-centered methodology in terms of addre…
▽ More
The objectives of this paper are to identify and analyse the extent to which the site is fulfilling all the user's requirements and needs. The related works comprise the history of interactive design and the benefits of user-centered development, which is the methodology followed in this survey. Moreover, there is a brief comparison between Waterfall and User-centered methodology in terms of addressing the issues of time saving and addressing fulfilment of users' needs. The data required to conduct this study was acquired using two research methods; the questionnaire and direct user observation, in order to address all the performance related attributes in the usability stage of the evaluation. An evaluation of the website, based on statements of usability goals and criteria, was undertaken in relation to the implementation and testing of the new design. JARIR bookstore website was chosen as a case study in this paper to investigate the usability and interactivity of the website design. The analysis section includes needs, users and tasks and data analysis, whereas the design phase covers the user interface and database design. At the end of this paper, some recommendations are presented regarding JARIR website that can be taken into account when develo** the website in the future.
△ Less
Submitted 16 March, 2012;
originally announced March 2012.