-
Bessel-beam direct-write of the etch-mask in a nano-film of alumina for high-efficiency Si solar cells
Authors:
Tomas Katkus,
Soon Hock Ng,
Haoran Mu,
Nguyen Hoai An Le,
Dominyka Stonyte,
Zahra Khajehsaeidimahabadi,
Gediminas Seniutinas,
Justas Baltrukonis,
Orestas Ulcinas,
Mindaugas Mikutis,
Vytautas Sabonis,
Yoshiaki Nishijima,
Michael Rienacker,
Jan Krugener,
Robby Peibst,
Sajeev John,
Saulius Juodkazis
Abstract:
Large surface area applications such as high-efficiency > 26% solar cells require surface patterning with 1-10 micrometers periodic patterns at high fidelity over 1-10 cm^2 areas (before up scaling to 1 m^2) to perform at, or exceed, the Lambertian (ray optics) limit of light trap**. Here we show a pathway to high-resolution sub-1 micrometer etch mask patterning by ablation using direct femtosec…
▽ More
Large surface area applications such as high-efficiency > 26% solar cells require surface patterning with 1-10 micrometers periodic patterns at high fidelity over 1-10 cm^2 areas (before up scaling to 1 m^2) to perform at, or exceed, the Lambertian (ray optics) limit of light trap**. Here we show a pathway to high-resolution sub-1 micrometer etch mask patterning by ablation using direct femtosecond laser writing performed at room conditions (without the need for a vacuum-based lithography approach). A Bessel beam was used to alleviate the required high surface tracking tolerance for ablation of 0.3-0.8 micrometer diameter holes in ~40 nm alumina Al2O3-mask at high writing speed, 7.5 cm/s; a patterning rate 1 cm^2 per 20 min. The plasma etching protocol was optimised for a zero-mesa formation of photonic crystal (PhC) trap** structures and smooth surfaces at the nanoscale level. Scaling up in area and throughput of the demonstrated approach is outlined.
△ Less
Submitted 21 March, 2024;
originally announced March 2024.
-
Vector Beams with Parabolic and Elliptic Cross-Sections for Laser Material Processing Applications
Authors:
Sergej Orlov,
Vitalis Vosylius,
Pavel Gotovski,
Artūras Grabusovas,
Justas Baltrukonis,
Titas Gertus
Abstract:
Beam profile engineering, where a desired optical intensity distribution can be generated by an array of phase shifting (or amplitude changing) elements is a promising approach in laser material processing. For example, a spatial light modulator (SLM) is a dynamic diffractive optical element allowing for experimental implementations of controllable beam profile. Scalar Mathieu beams have elliptica…
▽ More
Beam profile engineering, where a desired optical intensity distribution can be generated by an array of phase shifting (or amplitude changing) elements is a promising approach in laser material processing. For example, a spatial light modulator (SLM) is a dynamic diffractive optical element allowing for experimental implementations of controllable beam profile. Scalar Mathieu beams have elliptical intensity distribution perceivable as optical knives in the transverse plane and scalar Weber beams have a parabolic distribution, which enables us to call them optical shovels. Here, we introduce vector versions of scalar Mathieu and Weber beams and use those vector beams as a basis to construct controllable on-axis phase and amplitude distributions with polarization control. Further, we generate individual components of optical knife and shovel beams experimentally using SLMs as a toy model and report on our achievements in the control over the beam shape, dimensions and polarization along the propagation axis.
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
Controllable Spatial Array of Bessel-like Beams with Independent Axial Intensity Distributions for Laser Microprocessing
Authors:
Sergej Orlov,
Alfonsas Juršėnas,
Justas Baltrukonis,
Vytautas Jukna
Abstract:
Bessel beams generated via axicons are widely used for various applications like optical tweezers or laser microfabrication of transparent materials. The specific intensity profile having high aspect ratio of beam width and length in turn generates high aspect ratio void that resembles a needle. In contrast to commonly generated Bessel beam that has a fixed axial intensity distribution. We present…
▽ More
Bessel beams generated via axicons are widely used for various applications like optical tweezers or laser microfabrication of transparent materials. The specific intensity profile having high aspect ratio of beam width and length in turn generates high aspect ratio void that resembles a needle. In contrast to commonly generated Bessel beam that has a fixed axial intensity distribution. We present a novel method to engineer an optical needle that can have an arbitrary axial intensity distribution via superposition of different cone angle Bessel beams. We analytically describe spatial spectra of an optical needle having arbitrary axial intensity distribution. We also demonstrate a superposition of independent optical needles and analyze the physical limitations to observe well separated optical needles as they are influence by mutual interference of the individual beams. In order to verify our theoretical and numerical results we generate controllable spatial arrays of individual beams with various numbers and spatial separations by altering a spectrum of incoming laser beam via spatial light modulator. Lastly, we numerically examine distortions caused by propagation through planar air-dielectric interface and show compensation method by appropriately modifying spectral masks.
△ Less
Submitted 26 October, 2023;
originally announced October 2023.
-
All femtosecond optical pump and X-ray probe: holey-axicon for free electron laser
Authors:
V. Anand,
J. Maksimovic,
T. Katkus,
S. H. Ng,
O. Ulcinas,
M. Mikutis,
J. Baltrukonis,
A. Urbas,
G. Slekys,
H. Ogura,
D. Sagae,
T. Pikuz,
T. Somekawa,
N. Ozaki,
A. Vailionis,
G. Seniutinas,
V. Mizeikis,
K. Glazebrook,
J. P. Brodie,
P. R. Stoddart,
L. Rapp,
A. V. Rode,
E. G. Gamaly,
S. Juodkazis
Abstract:
We put forward a co-axial pump(optical)-probe(X-rays) experimental concept and show performance of the optical component. A Bessel beam generator with a central 100 micrometers-diameter hole (on the optical axis) was fabricated using femtosecond (fs) laser structuring inside a silica plate. This flat-axicon optical element produces a needle-like axial intensity distribution which can be used for t…
▽ More
We put forward a co-axial pump(optical)-probe(X-rays) experimental concept and show performance of the optical component. A Bessel beam generator with a central 100 micrometers-diameter hole (on the optical axis) was fabricated using femtosecond (fs) laser structuring inside a silica plate. This flat-axicon optical element produces a needle-like axial intensity distribution which can be used for the optical pump pulse. The fs-X-ray free electron laser (X-FEL) beam of sub-1 micrometer diameter can be introduced through the central hole along the optical axis onto a target as a probe. Different realisations of optical pump are discussed. Such optical elements facilitate alignment of ultra-short fs-pulses in space and time and can be used in light-matter interaction experiments at extreme energy densities on the surface and in the volume of targets. Full advantage of ultra-short 10 fs X-FEL probe pulses with fs-pump(optical) opens an unexplored temporal dimension of phase transitions and the fastest laser-induced rates of material heating and quenching. A wider field of applications of fs-laser-enabled structuring of materials and design of specific optical elements for astrophotonics is presented.
△ Less
Submitted 24 May, 2020;
originally announced May 2020.