-
Low Complexity Hybrid Beamforming for mmWave Full-Duplex Integrated Access and Backhaul
Authors:
Elyes Balti,
Chris Dick,
Brian L. Evans
Abstract:
We consider an integrated access and backhaul (IAB) node operating in full-duplex (FD) mode. We analyze simultaneous transmission from the New Radio gNB to the IAB node on the backhaul uplink, IAB node to a user equipment (UE) on the access downlink, and IAB transmitter to the IAB receiver on the self-interference (SI) channel. Our contributions include (1) a low complexity algorithm to jointly de…
▽ More
We consider an integrated access and backhaul (IAB) node operating in full-duplex (FD) mode. We analyze simultaneous transmission from the New Radio gNB to the IAB node on the backhaul uplink, IAB node to a user equipment (UE) on the access downlink, and IAB transmitter to the IAB receiver on the self-interference (SI) channel. Our contributions include (1) a low complexity algorithm to jointly design the hybrid analog/digital beamformers for all three nodes to maximize the sum spectral efficiency of the access and backhaul links by canceling SI and maximizing received power; (2) derivation of all-digital beamforming and spectral efficiency upper bound for use in benchmarking; and (3) simulations to compare full vs. half duplex modes, hybrid vs. all-digital beamforming algorithms, proposed hybrid vs. conventional beamforming algorithms, and spectral efficiency upper bound. In simulations, the proposed algorithm shows significant reduction in SI power and increase in sum spectral efficiency.
△ Less
Submitted 5 September, 2022;
originally announced September 2022.
-
Reverse Link Analysis for Full-Duplex Cellular Networks with Low Resolution ADC/DAC
Authors:
Elyes Balti,
Brian L. Evans
Abstract:
In this work, we consider a full-duplex (FD) massive multiple-input multiple-output (MIMO) cellular network with low-resolution analog-to-digital converters (ADCs) and digital-to-analog converter (DACs). Our first contribution is to provide a unified framework for reverse link (uplink) analysis where matched filters are applied at the FD base stations (BSs) under channel hardening. Second, we deri…
▽ More
In this work, we consider a full-duplex (FD) massive multiple-input multiple-output (MIMO) cellular network with low-resolution analog-to-digital converters (ADCs) and digital-to-analog converter (DACs). Our first contribution is to provide a unified framework for reverse link (uplink) analysis where matched filters are applied at the FD base stations (BSs) under channel hardening. Second, we derive the expressions of the signal-to-quantization-plus-interference-plus-noise ratio (SQINR) for general and special cases. Finally, we quantify effects of quantization error, pilot contamination, and full duplexing for a hexagonal cell lattice on spectral efficiency and cumulative distribution function (CDF) to show that FD outperforms half duplex (HD) in a wide variety of scenarios.
△ Less
Submitted 18 May, 2022; v1 submitted 28 March, 2022;
originally announced March 2022.
-
Forward Link Analysis for Full-Duplex Cellular Networks with Low Resolution ADC/DAC
Authors:
Elyes Balti,
Brian L. Evans
Abstract:
In this work, we consider a full-duplex (FD) massive multiple-input multiple-output (MIMO) cellular network with low resolution analog-to-digital converters (ADCs) and digital-to-analog converters (DACs). Our first contribution is to propose a unified framework for forward link analysis where matched filter precoders are applied at the FD base stations (BSs) under channel hardening. Second, we der…
▽ More
In this work, we consider a full-duplex (FD) massive multiple-input multiple-output (MIMO) cellular network with low resolution analog-to-digital converters (ADCs) and digital-to-analog converters (DACs). Our first contribution is to propose a unified framework for forward link analysis where matched filter precoders are applied at the FD base stations (BSs) under channel hardening. Second, we derive expressions for the signal-to-quantization-plus-interference-plus-noise ratio (SQINR) for general and special cases. Finally, we quantify effects of quantization error, pilot contamination, and full duplexing for a hexagonal cell lattice on spectral efficiency and cumulative distribution function (CDF) to show that FD outperforms half duplex (HD) in a wide variety of scenarios.
△ Less
Submitted 18 May, 2022; v1 submitted 7 March, 2022;
originally announced March 2022.
-
Full-Duplex Wideband mmWave Integrated Access and Backhaul with Low Resolution ADCs
Authors:
Elyes Balti,
Brian L. Evans
Abstract:
We consider a wideband integrated access and backhaul system operating in full-duplex mode between the New Radio gNB donor and single user equipment. Due to high power consumption in millimeter wave systems, we use low-resolution analog-to-digital converters (ADCs) in the receivers. Our contributions include (1) hybrid beamformer to maximize sum spectral efficiency of the access and backhaul links…
▽ More
We consider a wideband integrated access and backhaul system operating in full-duplex mode between the New Radio gNB donor and single user equipment. Due to high power consumption in millimeter wave systems, we use low-resolution analog-to-digital converters (ADCs) in the receivers. Our contributions include (1) hybrid beamformer to maximize sum spectral efficiency of the access and backhaul links by canceling self-interference and maximizing received power; (2) all-digital beamformer and upper bound on sum spectral efficiency; and (3) simulations to compare full vs. half duplex, finite vs. infinite ADC resolution, hybrid vs. all-digital beamforming, and the upper bound in spectral efficiency.
△ Less
Submitted 6 February, 2022; v1 submitted 24 January, 2022;
originally announced February 2022.
-
Integration of Vehicular Clouds and Autonomous Driving: Survey and Future Perspectives
Authors:
Yassine Maalej,
Elyes Balti
Abstract:
For decades, researchers on Vehicular Ad-hoc Networks (VANETs) and autonomous vehicles presented various solutions for vehicular safety and autonomy, respectively. Yet, the developed work in these two areas has been mostly conducted in their own separate worlds, and barely affect one-another despite the obvious relationships. In the coming years, the Internet of Vehicles (IoV), encompassing sensin…
▽ More
For decades, researchers on Vehicular Ad-hoc Networks (VANETs) and autonomous vehicles presented various solutions for vehicular safety and autonomy, respectively. Yet, the developed work in these two areas has been mostly conducted in their own separate worlds, and barely affect one-another despite the obvious relationships. In the coming years, the Internet of Vehicles (IoV), encompassing sensing, communications, connectivity, processing, networking, and computation is expected to bridge many technologies to offer value-added information for the navigation of self-driving vehicles, to reduce vehicle on board computation, and to deliver desired functionalities. Potentials for bridging the gap between these two worlds and creating synergies of these two technologies have recently started to attract significant attention of many companies and government agencies. In this article, we first present a comprehensive survey and an overview of the emerging key challenges related to the two worlds of Vehicular Clouds (VCs) including communications, networking, traffic modelling, medium access, VC Computing (VCC), VC collation strategies, security issues, and autonomous driving (AD) including 3D environment learning approaches and AD enabling deep-learning, computer vision and Artificial Intelligence (AI) techniques. We then discuss the recent related work and potential trends on merging these two worlds in order to enrich vehicle cognition of its surroundings, and enable safer and more informed and coordinated AD systems. Compared to other survey papers, this work offers more detailed summaries of the most relevant VCs and ADs systems in the literature, along with some key challenges and insights on how different technologies fit together to deliver safety, autonomy and infotainment services.
△ Less
Submitted 15 January, 2022; v1 submitted 8 January, 2022;
originally announced January 2022.
-
Spectral Efficiency Optimization for mmWave Wideband MIMO RIS-assisted Communication
Authors:
Pooja Nuti,
Elyes Balti,
Brian L. Evans
Abstract:
Reconfigurable Intelligent Surfaces (RIS) are passive or semi-passive heterogeneous metasurfaces and consist of many tunable elements. RIS is gaining momentum as a promising new technology to enable transforming the propagation environment into controllable parameters. In this paper, we investigate the co-design of per-subcarrier power allocation matrices and multielement RIS phase shifts in downl…
▽ More
Reconfigurable Intelligent Surfaces (RIS) are passive or semi-passive heterogeneous metasurfaces and consist of many tunable elements. RIS is gaining momentum as a promising new technology to enable transforming the propagation environment into controllable parameters. In this paper, we investigate the co-design of per-subcarrier power allocation matrices and multielement RIS phase shifts in downlink wideband MIMO transmission using 28 GHz frequency bands. Our contributions in improving RIS-aided links include (1) enhanced system modeling with pathloss and blockage modeling, and uniform rectangular array (URA) design, (2) design of gradient ascent co-design algorithm, and (3) asymptotic (Big O) complexity analysis of proposed algorithm and runtime complexity evaluation.
△ Less
Submitted 15 December, 2021;
originally announced January 2022.
-
Full-Duplex Massive MIMO Cellular Networks with Low Resolution ADC/DAC
Authors:
Elyes Balti,
Brian L. Evans
Abstract:
In this paper, we provide an analytical framework for full-duplex (FD) massive multiple-input multiple-output (MIMO) cellular networks with low resolution analog-to-digital and digital-to-analog converters (ADCs and DACs). Matched filters are employed at the FD base stations (BSs) at the transmit and receive sides. For both reverse and forward links, our contributions are (1) derivations of the si…
▽ More
In this paper, we provide an analytical framework for full-duplex (FD) massive multiple-input multiple-output (MIMO) cellular networks with low resolution analog-to-digital and digital-to-analog converters (ADCs and DACs). Matched filters are employed at the FD base stations (BSs) at the transmit and receive sides. For both reverse and forward links, our contributions are (1) derivations of the signal-to-quantization-plus-interference-and-noise ratio (SQINR) for general and special cases; (2) derivations of spectral efficiency for asymptotic cases as well as for power scaling laws; and (3) quantifying effects of quantization error, loopback self-interference, and inter-user interference for hexagonal cells and Poisson Point Process (PPP) tessellations on outage probability and spectral efficiency.
△ Less
Submitted 5 September, 2022; v1 submitted 19 November, 2021;
originally announced December 2021.
-
Joint Beamforming and Interference Cancellation in MmWave Wideband Full-Duplex Systems
Authors:
Elyes Balti,
Brian L. Evans
Abstract:
Full-duplex (FD) systems have the capability to transmit and receive at the same time in the same frequency band. FD systems can reduce congestion and latency and improve coverage and spectral efficiency. As a relay, they can increase range and decrease outages. Full-duplex (FD) wireless systems have been emerging as a practical solution to provide high bandwidth, low latency, and big data process…
▽ More
Full-duplex (FD) systems have the capability to transmit and receive at the same time in the same frequency band. FD systems can reduce congestion and latency and improve coverage and spectral efficiency. As a relay, they can increase range and decrease outages. Full-duplex (FD) wireless systems have been emerging as a practical solution to provide high bandwidth, low latency, and big data processing in millimeter wave and Terahertz systems to support cellular networks, autonomous driving, platooning, advanced driving assistance and other systems. However, FD systems suffer from loopback self-interference that can swamp the analog-to-digital converters (ADCs) resulting in very low spectral efficiency. In this context, we consider a cellular system wherein uplink and downlink users independently communicate with FD base station. The proposed contributions are (1) three hybrid beamforming algorithms to cancel self-interference and increase the received power, and (2) evaluation of outage probability, spectral efficiency, and energy efficiency of the proposed algorithms. We consider full-digital beamforming and upper bound as benchmarks. Finally, we show the resiliency of Algorithm 2 against self-interference in comparison with Algorithms 1 and 3, as well as conventional approaches such as beam steering, angle search and singular value decomposition.
△ Less
Submitted 23 October, 2021;
originally announced October 2021.
-
Performance Analysis of Mixed RF/FSO Relaying under HPA Nonlinearity and IQ Imbalance
Authors:
Elyes Balti
Abstract:
In this paper, we present the performance analysis of asymmetric dual-hop RF/FSO system with multiple relays. The RF channels follow the correlated Rayleigh fading while the optical links are subject to the Gamma-Gamma fading. To select the candidate relay to forward the communication, we assume Partial Relay Selection (PRS) with outdated Channel State Information (CSI). Unlike the vast majority o…
▽ More
In this paper, we present the performance analysis of asymmetric dual-hop RF/FSO system with multiple relays. The RF channels follow the correlated Rayleigh fading while the optical links are subject to the Gamma-Gamma fading. To select the candidate relay to forward the communication, we assume Partial Relay Selection (PRS) with outdated Channel State Information (CSI). Unlike the vast majority of work in this area, we introduce the impairments to the relays and the destination. We will propose three impairment models called Soft Envelope Limiter (SEL), Traveling Wave Tube Amplifier (TWTA) and IQ Imbalance in order to compare the resilience of our system with the RF one against the hardware impairments. Closed-from of the outage probability (OP) is derived in terms of Meijer's G function as well as the upper bound of the ergodic capacity (EC). The Bit Error Rate (BER) and the exact EC are evaluated numerically. Finally, analytical and numerical results are presented and validated by Monte Carlo simulation.
△ Less
Submitted 30 August, 2021; v1 submitted 11 August, 2021;
originally announced August 2021.
-
Gradient Ascent Algorithm for Enhancing Secrecy Rate in Wireless Communications for Smart Grid
Authors:
Neji Mensi,
Danda B. Rawat,
Elyes Balti
Abstract:
The emerging Internet of Things (IoT) and bidirectional communications in smart grid are expected to improve smart grid capabilities and electricity management. Because of massive number of IoT devices in smart grid, size of the data to be transmitted increases, that demands a high data rate to meet the real-time smart grid communications requirements. Sub-6 GHz, millimeter-wave (mmWave) technolog…
▽ More
The emerging Internet of Things (IoT) and bidirectional communications in smart grid are expected to improve smart grid capabilities and electricity management. Because of massive number of IoT devices in smart grid, size of the data to be transmitted increases, that demands a high data rate to meet the real-time smart grid communications requirements. Sub-6 GHz, millimeter-wave (mmWave) technologies, and massive multiple-input multiple-output (MIMO) technologies can meet high data rate demands. However, IoT enabled smart grid is still subject to various security challenges such as eavesdrop**, where attackers attempt to overhear the transmitted signals and the jamming attack, where the attacker perturbs the received signals at the receiver. In this paper, our goal is to investigate jamming and eavesdrop** attacks while improving secrecy capacity for smart grid communications. Specifically, we propose to employ a hybrid beamforming design for wireless communications in smart energy grid. In previous works, the secrecy capacity is increased by randomly augmenting the source power or setting the system combiners. Unlike state-of-the-art, we design and evaluate the Gradient Ascent algorithm to search for the best combiners/waveform that maximizes the secrecy capacity in smart grid communications. We also study two different optimization scenarios by considering both fixed and variable transmit power. Numerical results are used for performance evaluation and supporting our formal analysis.
△ Less
Submitted 11 August, 2021;
originally announced August 2021.
-
Hybrid Beamforming Design for Wideband mmWave Full-Duplex Systems
Authors:
Elyes Balti,
Brian L. Evans
Abstract:
Recently, full duplex (FD) has been studied in 5G LTE millimeter wave (mmWave) cellular communications for New Radio in 3GPP releases 15-17. FD allows bidirectional transmission over the same resources and has the potential to reduce latency and double spectral efficiency. Self-interference (SI) is the primary drawback. SI can be several orders of magnitude greater than the received signal power,…
▽ More
Recently, full duplex (FD) has been studied in 5G LTE millimeter wave (mmWave) cellular communications for New Radio in 3GPP releases 15-17. FD allows bidirectional transmission over the same resources and has the potential to reduce latency and double spectral efficiency. Self-interference (SI) is the primary drawback. SI can be several orders of magnitude greater than the received signal power, saturate the analog-to-digital converters (ADCs) and degrade communication performance severely. Massive mmWave antenna arrays may provide enough degrees of freedom for spatial multiplexing and SI suppression. In this paper, we design spatial beamformers for the phased arrays already built into the FD basestation/relay to extend mmWave coverage to a single user. We propose alternating projections to design the precoder and combiner to maximize the sum of the uplink and downlink spectral efficiencies while bringing SI below the noise floor. Our contributions include (1) hybrid analog/digital beamformer design algorithm to cancel SI in the analog domain to avoid ADC saturation and in the digital domain on each subcarrier; (2) full-digital beamformer design algorithm; and (3) analysis of spectral efficiency, energy efficiency and outage probability. In simulation, the proposed algorithms outperform beamsteering, singular value decomposition, angle search, and half-duplex techniques.
△ Less
Submitted 5 February, 2022; v1 submitted 26 May, 2021;
originally announced July 2021.
-
Rate and Power Adaptation for Multihop Regenerative Relaying Systems
Authors:
Elyes Balti,
Brian K. Johnson
Abstract:
In this work, we provide a global framework analysis of a multi-hop relaying systems wherein the transmitter (TX) communicates with the receiver (RX) through a set of intermediary relays deployed either in series or in parallel. Regenerative based relaying scheme is assumed such as the repetition-coded decoded-and-forward (DF) wherein the decoding is threshold-based. To reflect a wide range of fad…
▽ More
In this work, we provide a global framework analysis of a multi-hop relaying systems wherein the transmitter (TX) communicates with the receiver (RX) through a set of intermediary relays deployed either in series or in parallel. Regenerative based relaying scheme is assumed such as the repetition-coded decoded-and-forward (DF) wherein the decoding is threshold-based. To reflect a wide range of fading, we introduce the generalized $H$-function (also termed as Fox-$H$ function) distribution model which enables the modeling of radio-frequency (RF) fading like Weibull and Gamma, as well as the free-space optic (FSO) such as the Double Generalized Gamma and Málaga fading. In this context, we introduce various power and rate adaptation policies based on the channel state information (CSI) availability at TX and RX. Finally, we address the effects of relaying topology, number of relays and fading model, etc, on the performance reliability of each link adaptation policy.
△ Less
Submitted 6 July, 2021; v1 submitted 15 June, 2021;
originally announced June 2021.
-
Situational Coverage and Rate Distribution Maps for 5G V2X Systems Using Ray-Tracing
Authors:
Elyes Balti
Abstract:
Millimeter wave (mmWave) is a practical solution to provide high data rate for vehicle-to-everything (V2X) communications. This enables the future autonomous vehicles to exchange big data with the base stations (BSs) such as the velocity, and the location to enhance the safety for the advanced driving assistance system (ADAS). To achieve this goal, we propose to develop a situational rate map to c…
▽ More
Millimeter wave (mmWave) is a practical solution to provide high data rate for vehicle-to-everything (V2X) communications. This enables the future autonomous vehicles to exchange big data with the base stations (BSs) such as the velocity, and the location to enhance the safety for the advanced driving assistance system (ADAS). To achieve this goal, we propose to develop a situational rate map to characterize the distribution of the rates achieved between the BSs and a uniform grid of vehicles. In this context, we consider a mmWave 5G cellular system with two physical structures which are the analog-only beamforming and hybrid precoding with limited feedback to investigate the rate distribution for single and multiuser scenarios. We will use the Ray-Tracing tool to construct the simulation environment and generate the channels between the BSs and the grid of vehicles. Finally, we will study the effects of the carrier frequency, the bandwidth, the BSs deployment, the blockage, the codebook, the physical architectures and the number of served users on the rate distribution maps. Moreover, we will present the rate statistics to evaluate the coverage of served users for certain services requirements and for various road shapes such as corners, intersections and straightways.
△ Less
Submitted 18 May, 2021; v1 submitted 3 May, 2021;
originally announced May 2021.
-
Adaptive Self-Interference Cancellation for Full-Duplex Wireless Communication Systems
Authors:
Elyes Balti,
Brian L. Evans
Abstract:
In this letter, we consider single-cell, single-user systems wherein uplink and downlink user equipment communicate with a full-duplex relay. Due to the near-far problem, the self-interference (SI) can be 100-1000x the received signal power. In this context, we consider the adaptive Least Mean Squares (LMS) algorithm to estimate the SI channel and then subtract the SI from the desired received sig…
▽ More
In this letter, we consider single-cell, single-user systems wherein uplink and downlink user equipment communicate with a full-duplex relay. Due to the near-far problem, the self-interference (SI) can be 100-1000x the received signal power. In this context, we consider the adaptive Least Mean Squares (LMS) algorithm to estimate the SI channel and then subtract the SI from the desired received signal before the analog-to-digital converter (ADC). We measure the robustness of this technique in terms of bit error rate (BER) and spectral efficiency.
△ Less
Submitted 1 June, 2021; v1 submitted 3 April, 2021;
originally announced April 2021.
-
Hybrid Precoding for mmWave V2X Doubly-Selective Multiuser MIMO Systems
Authors:
Elyes Balti
Abstract:
Millimeter wave (mmWave) is a practical solution to provide high data rate for the vehicle-to-everything (V2X) communications. This enables the future autonomous vehicles to exchange big data with the base stations (BSs) such as the velocity and the location to improve the awareness of the advanced driving assistance system (ADAS). In this context, we consider a single-cell multiuser doubly-select…
▽ More
Millimeter wave (mmWave) is a practical solution to provide high data rate for the vehicle-to-everything (V2X) communications. This enables the future autonomous vehicles to exchange big data with the base stations (BSs) such as the velocity and the location to improve the awareness of the advanced driving assistance system (ADAS). In this context, we consider a single-cell multiuser doubly-selective system wherein the BS simultaneously serves multiple vehicles. To accomplish this requirement, the BS is implemented in hybrid architecture to support multiple spatial streams while the vehicles have analog-only structures. In this work, we develop a low-complexity hybrid precoding algorithm wherein the design of the hybrid precoder at the BS and the analog combiner at the vehicles require small training and feedback overhead. We propose a two-stage hybrid precoding algorithm wherein the first stage designs the analog beamformers as in single user scenario while the second stage designs the multiuser digital precoder at the BS. In the second stage, we derive closed-form digital precoders such as Maximum Ratio Transmission (MRT), Zero-Forcing (ZF) and Minimum Mean Square Error (MMSE) as a first variant while we propose iterative digital precoder as a second variant. The design of the digital precoders for the two variants requires the limited feedback sent from the vehicles to BS. We refer to the random vector quantization (RVQ) and the beamsteering codebooks to quantize the feedbacks for variants I and II, respectively, since the perfect feedback requires long overhead and large training. We evaluate the rate loss incurred by the quantization of the digital and analog codebooks against the perfect channel state information at the transmitter (CSIT).
△ Less
Submitted 23 March, 2021; v1 submitted 17 March, 2021;
originally announced March 2021.
-
Securing V2I Communications in 5G and Beyond Wireless System Using Gradient Ascent Approach
Authors:
Neji Mensi,
Danda B. Rawat,
Elyes Balti
Abstract:
The 5G and beyond wireless systems, instead of being just an extension of 4G, are regarded as `network of networks' which is expected to integrate heterogeneous wireless networks including wireless vehicular networks (WVN). The WVN promises to solve many issues such as reducing road accidents, traffic jams, fuel consumption and commute time, which is subject to various security issues such as eave…
▽ More
The 5G and beyond wireless systems, instead of being just an extension of 4G, are regarded as `network of networks' which is expected to integrate heterogeneous wireless networks including wireless vehicular networks (WVN). The WVN promises to solve many issues such as reducing road accidents, traffic jams, fuel consumption and commute time, which is subject to various security issues such as eavesdrop**, where attackers attempt to overhear the secret transmitted signal passively (which makes the detection/defense very difficult). In this work, our objective is to implement a security scheme by improving the secrecy capacity in Sub-6 GHz and millimeter-wave (mmWave) bands. Vehicle-to-Infrastructure (V2I) for 5G and beyond wireless network. Unlike previous works where the secrecy capacity is increased by randomly augmenting the source power or setting the system combiners/precoders, in this work we employ the Gradient Ascent algorithm to search for the best combiners/precoders that maximize the secrecy rate performance. We further present two different optimization scenarios: fixed and variable transmission power.
△ Less
Submitted 5 February, 2021; v1 submitted 1 February, 2021;
originally announced February 2021.
-
Temporal CSI Correlation in Mixed RF/FSO Cooperative Relaying Systems Under Joint Effects of HPA Nonlinearities and IQ Imbalance
Authors:
Elyes Balti,
Neji Mensi,
Danda B. Rawat
Abstract:
In this paper, we present the performance analysis of mixed RF/FSO system with multiple relays. To select the best relay, we adopt partial relay selection with outdated CSI wherein we investigate the effect of the temporal correlation of the channels. Unlike the vast majority of work, we introduce the impairments to the relays and the destination and we compare the performance against conventional…
▽ More
In this paper, we present the performance analysis of mixed RF/FSO system with multiple relays. To select the best relay, we adopt partial relay selection with outdated CSI wherein we investigate the effect of the temporal correlation of the channels. Unlike the vast majority of work, we introduce the impairments to the relays and the destination and we compare the performance against conventional RF relaying systems. We further derive the expressions of the outage probability and the ergodic capacity as well as the bounds to unpack engineering insights into the system robustness.
△ Less
Submitted 15 March, 2021; v1 submitted 1 February, 2021;
originally announced February 2021.
-
CUDA-Accelerated Application Scheduling in Vehicular Clouds Under Advanced Multichannel Operations in WAVE
Authors:
Yassine Maalej,
Elyes Balti
Abstract:
This paper presents a novel Advanced Activity-Aware (AAA) scheme to optimize and improve Multi-Channel Operations based on the IEEE 1609.4 standard in wireless access vehicular environments (WAVE). The proposed scheme relies on the awareness of the vehicular safety load to dynamically find an optimal setup for switching between service channel intervals (SCHI) and control channel intervals (CCHI).…
▽ More
This paper presents a novel Advanced Activity-Aware (AAA) scheme to optimize and improve Multi-Channel Operations based on the IEEE 1609.4 standard in wireless access vehicular environments (WAVE). The proposed scheme relies on the awareness of the vehicular safety load to dynamically find an optimal setup for switching between service channel intervals (SCHI) and control channel intervals (CCHI). SCHI are chosen for non-critical applications (e.g. infotainment), while CCHI are utilized for critical applications (e.g. safety-related). We maximize the channel utilization without sacrificing other application requirements such as latency and bandwidth. Our scheme is implemented and evaluated network simulator-3 (NS3). We guarantee the default Synchronization Interval (SI), like implemented by the standard in vehicular ad hoc networks (VANETs), when tested on real-time simulations of vehicular cloud (VC) load and VANET setups using NS3. We also evaluate a Markov Decision Process (MDP) based scheme and a fast greedy heuristic to optimize the problem of vehicular task placement with both IEEE 1609.4 and an opportunistic V2I version of the proposed AAA scheme. Our solution offers the reward of the VC by taking into account the overall utilization of the distributed virtualized VCs resources and vehicular bag-of-tasks (BOTs) placements both sequentially and in parallel. We present the simulation metrics proving that our proposed solution significantly improve the throughput and decreases the average delay of uploaded packets used for non-safety applications, while maintaining reliable communication (via CCHI) for safety-related applications similar to the IEEE 1609.4 standard.
△ Less
Submitted 22 December, 2020;
originally announced December 2020.
-
Stochastic Geometry Analysis of Uplink Cellular Networks with FSO Backhauling: Cooperative Relaying Vs. Reflecting Surfaces
Authors:
Elyes Balti,
Brian K. Johnson
Abstract:
In this work, we consider the performance analysis of the uplink cellular networks with free space optics (FSO) backhauling. The user equipment (UE) communicates with the nearest Base Station (BS) in first slot while in second slot, the BS converts the received radio frequency (RF) signal into FSO pulse and transmits to the data center. We adopt the Rayleigh fading for the uplink channels while th…
▽ More
In this work, we consider the performance analysis of the uplink cellular networks with free space optics (FSO) backhauling. The user equipment (UE) communicates with the nearest Base Station (BS) in first slot while in second slot, the BS converts the received radio frequency (RF) signal into FSO pulse and transmits to the data center. We adopt the Rayleigh fading for the uplink channels while the FSO backhaul encompasses the turbulence-induced fading which follows the Málaga distribution, the weather pathloss, and the pointing errors fading which is distributed following the generalized Beckmann model. Further, we will compare the performances when the BS behaves as either a decode-and-forward (DF) relay or an intelligent reflecting surface (IRS). Next, we will propose an optimal design of the phase shifters of the IRS to minimize the interference and improve the rate to beat relaying. Capitalizing on this framework, we will derive the system performance metrics such as the coverage probability as well as the spectral efficiency. Focusing on high SNR, we will obtain the diversity gain to get engineering insights into the system performance and limitations. Finally, the analytical results are confirmed by Monte Carlo simulations.
△ Less
Submitted 28 October, 2020;
originally announced October 2020.
-
On The Joint Effects of HPA Nonlinearities and IQ Imbalance On Mixed RF/FSO Cooperative Systems
Authors:
Elyes Balti,
Brian K. Johnson
Abstract:
In this work, we provide a framework analysis of dual-hop hybrid Millimeter Wave Radio Frequency (RF)/Free Space Optical (FSO) MIMO relaying system. The source is equipped with multiple antennas and employs conjugate beamforming while the destination consists of multiple apertures with selection combining. The system also consists of a relay operating at amplify-and-forward mode. The RF channels a…
▽ More
In this work, we provide a framework analysis of dual-hop hybrid Millimeter Wave Radio Frequency (RF)/Free Space Optical (FSO) MIMO relaying system. The source is equipped with multiple antennas and employs conjugate beamforming while the destination consists of multiple apertures with selection combining. The system also consists of a relay operating at amplify-and-forward mode. The RF channels are subject to Nakagami-m fading while the optical links experience the Málaga distribution. In addition, we introduce the impairments to the relay and receiver. In fact, the relay is impaired by the High Power Amplifier (HPA) nonlinearities while the receiver suffers from the In phase and Quadrature Imbalance. Moreover, we assume two types of HPA nonlinearities impairments called Soft Envelope Limiter (SEL) and Traveling Wave Tube Amplifier (TWTA). Closed-forms of the outage probability, the bit error probability, and the ergodic capacity are derived. Capitalizing on these performances, we derive the high SNR asymptotes to unpack insightful metrics such as the diversity gain. We also address the impacts of some key factors on the system performance such as the impairments, the interferers, the number of antennas and apertures and the pointing errors, etc. Finally, the analytical expressions are confirmed by Monte Carlo simulation.
△ Less
Submitted 27 August, 2021; v1 submitted 26 October, 2020;
originally announced October 2020.
-
MmWaves Cellular V2X for Cooperative Diversity Relay Fast Fading Channels
Authors:
Elyes Balti,
Brian K. Johnson
Abstract:
In this work, we present a framework analysis of millimeter waves (mmWaves) vehicular communications systems. Communications between vehicles take place through a cooperative relay which acts as an intermediary base station (BS). The relay is equipped with multiple transmit and receive antennas and it employs decode-and-forward (DF) to process the signal. Also, the relay applies maximal ratio comb…
▽ More
In this work, we present a framework analysis of millimeter waves (mmWaves) vehicular communications systems. Communications between vehicles take place through a cooperative relay which acts as an intermediary base station (BS). The relay is equipped with multiple transmit and receive antennas and it employs decode-and-forward (DF) to process the signal. Also, the relay applies maximal ratio combining (MRC), and maximal ratio transmission (MRT), respectively, to receive and forward the signal. As the vehicles' speeds are relatively high, the channel experiences a fast fading and this time variation is modeled following the Jakes' autocorrelation model. We also assume narrowband fading channel. Closed-form expressions of the reliability metrics such as the outage probability, the probability of error and the channel capacity are derived. Capitalizing on these performances, we derive the low and high power regimes for the capacity, and the high signal-to-interference-plus-noise-ratio (SINR) asymptotes for the outage and error probability to get full insights into the system gains such as the diversity and coding gains.
△ Less
Submitted 23 October, 2020;
originally announced October 2020.
-
PLS for V2I Communications Using Friendly Jammer and Double kappa-mu Shadowed Fading
Authors:
Neji Mensi,
Danda B. Rawat,
Elyes Balti
Abstract:
The concept of intelligent transportation systems (ITS) is considered to be a highly promising area of research due to its diversity of unique features. It is based mainly on the wireless vehicular network (WVN), where vehicles can perform sophisticated services such as sharing real-time safety information. To ensure high-quality service, WVN needs to solve the security challenges like eavesdroppi…
▽ More
The concept of intelligent transportation systems (ITS) is considered to be a highly promising area of research due to its diversity of unique features. It is based mainly on the wireless vehicular network (WVN), where vehicles can perform sophisticated services such as sharing real-time safety information. To ensure high-quality service, WVN needs to solve the security challenges like eavesdrop**, where malicious entities try to intercept the confidential transmitted signal. In this paper, we are going to provide a security scheme under the Double kappa-mu Shadowed fading. Our solution is based on the use of a friendly jammer that will transmit an artificial noise (AN) to jam the attacker's link and decrease its eavesdrop** performances. To evaluate the efficiency of our solution, we investigated the outage probability for two special cases: Nakagami-m and Rician shadowed while taking into consideration the density of the blockage and the shadowing effects. We also studied the average secrecy capacity via deriving closed-form expressions of the ergodic capacity at the legitimate receiver and the attacker for the special case: Nakagami-m fading distribution.
△ Less
Submitted 17 October, 2020;
originally announced October 2020.
-
Adaptive Gradient Search Beamforming for Full-Duplex mmWave MIMO Systems
Authors:
Elyes Balti
Abstract:
In this work, we present a framework analysis of full-duplex (FD) systems for Millimeter Wave (mmWave) analog architecture. Given that FD systems can double the ergodic capacity, such systems experience large losses caused by the loopback self-interference (SI). In addition, systems with analog architecture also suffer from other forms of losses mainly incurred by the constant amplitude (CA) const…
▽ More
In this work, we present a framework analysis of full-duplex (FD) systems for Millimeter Wave (mmWave) analog architecture. Given that FD systems can double the ergodic capacity, such systems experience large losses caused by the loopback self-interference (SI). In addition, systems with analog architecture also suffer from other forms of losses mainly incurred by the constant amplitude (CA) constraint. For this purpose, we propose the projected Gradient Ascent algorithm to maximize the sum rate under the unit-norm and CA constraints. Unlike previous works, our approach achieves the best spectral efficiency while minimizing the losses incurred by the CA constraint. We also consider an adaptive step size to compensate for the perturbations that may affect the cost function during the optimization. The results will show that the proposed algorithm converges to the same optimal value for different initializations while the number of iterations required for the convergence changes for each case. In this context, we primarily consider the gradient search method for a two-nodes FD systems and then we extend the analysis for a dual-hop FD relaying systems. Finally, we evaluate the robustness of our method in terms of rate and outage probability and compare with previous approaches.
△ Less
Submitted 15 December, 2020; v1 submitted 16 October, 2020;
originally announced October 2020.
-
Physical Layer Security for V2I Communications: Reflecting Surfaces Vs. Relaying
Authors:
Neji Mensi,
Danda B. Rawat,
Elyes Balti
Abstract:
Wireless vehicular network (WVN) is exponentially gaining attention from industries and researchers since it is the Keystone of intelligent transportation systems (ITS). Despite the sophisticated features and services that it can offer, it is susceptible to networking attacks such as eavesdrop** threats where the confidential transmitted signal could be overheard by a malicious entity. In this p…
▽ More
Wireless vehicular network (WVN) is exponentially gaining attention from industries and researchers since it is the Keystone of intelligent transportation systems (ITS). Despite the sophisticated features and services that it can offer, it is susceptible to networking attacks such as eavesdrop** threats where the confidential transmitted signal could be overheard by a malicious entity. In this paper, we intend to study the physical layer security (PLS) where we consider the eavesdrop** attack for vehicle-to-infrastructure (V2I) communications. We analyze the average secrecy capacity, under different scenarios by comparing the performances of employing the decode-and-forward (D relay, the amplify-and-forward fixed gain (AFFG) relay, and the intelligent reflecting surface (IRS). Actually, this comparison investigates the efficiency of IRS comparing to the traditional relaying systems, since it was introduced as a novel paradigm in wireless technology with highly promising potential, especially in 5G and 6G.
△ Less
Submitted 14 October, 2020;
originally announced October 2020.
-
Zero-Forcing Max-Power Beamforming for Hybrid mmWave Full-Duplex MIMO Systems
Authors:
Elyes Balti,
Neji Mensi
Abstract:
Full-duplex (FD) systems gained enormous attention because of the potential to double the spectral efficiency. In the context of 5G technology, FD systems operating at millimeter-wave (mmWave) frequencies become one of the most promising solutions to further increase the spectral efficiency and reduce the latency. However, such systems are vulnerable to the self-interference (SI) that significantl…
▽ More
Full-duplex (FD) systems gained enormous attention because of the potential to double the spectral efficiency. In the context of 5G technology, FD systems operating at millimeter-wave (mmWave) frequencies become one of the most promising solutions to further increase the spectral efficiency and reduce the latency. However, such systems are vulnerable to the self-interference (SI) that significantly degrades the performance. To overcome this shortcoming, analog-only beamforming techniques have been developed to mitigate the SI. Because of the huge power consumption, systems operating at mmWave frequencies beamform the power by only tunning the phase shifters while maintaining constant amplitudes. Such a hardware constraint, known as the constant amplitude (CA) constraint, severely limits the system performance. In this work, we propose a digital and analog hybrid beamforming design that completely eliminates the SI while substantially minimizing the losses imposed by the CA constraint. Further, we develop a fully-digital beamforming design and derive the upper bound for the spectral efficiency as benchmarking tools to quantify the losses of our proposed hybrid design.
△ Less
Submitted 16 December, 2020; v1 submitted 28 February, 2020;
originally announced March 2020.
-
Tractable Approach to MmWaves Cellular Analysis with FSO Backhauling under Feedback Delay and Hardware Limitations
Authors:
Elyes Balti,
Brian K. Johnson
Abstract:
In this work, we investigate the performance of a millimeter waves (mmWaves) cellular system with free space optical (FSO) backhauling. MmWave channels are subject to Nakagami-m fading while the optical links experience the Double Generalized Gamma including atmospheric turbulence, path loss and the misalignment between the transmitter and the receiver aperture (also known as the pointing errors).…
▽ More
In this work, we investigate the performance of a millimeter waves (mmWaves) cellular system with free space optical (FSO) backhauling. MmWave channels are subject to Nakagami-m fading while the optical links experience the Double Generalized Gamma including atmospheric turbulence, path loss and the misalignment between the transmitter and the receiver aperture (also known as the pointing errors). The FSO model also takes into account the receiver detection technique which could be either heterodyne or intensity modulation and direct detection (IM/DD). Each user equipment (UE) has to be associated to one serving base station (BS) based on the received signal strength (RSS) or Channel State Information (CSI). We assume partial relay selection (PRS) with CSI based on mmWaves channels to select the BS associated with the highest received CSI. Each serving BS decodes the received signal for denoising, converts it into modulated FSO signal, and then forwards it to the data center. Thereby, each BS can be viewed as a decode-and-forward (DF) relay. In practice, the relay hardware suffers from nonlinear high power amplification (HPA) impairments which, substantially degrade the system performance. In this work, we will discuss the impacts of three common HPA impairments named respectively, soft envelope limiter (SEL), traveling wave tube amplifier (TWTA), and solid state power amplifier (SSPA). Novel closed-forms and tight upper bounds of the outage probability, the probability of error, and the achievable rate are derived. Capitalizing on these performance, we derive the high SNR asymptotes to get engineering insights into the system gain such as the diversity order.
△ Less
Submitted 23 May, 2019;
originally announced May 2019.
-
Mixed RF/FSO Relaying Systems with Hardware Impairments
Authors:
Elyes Balti,
Mohsen Guizani,
Bechir Hamdaoui,
Bassem Khalfi
Abstract:
In this work, we provide a detailed analysis of a dual-hop fixed gain (FG) amplify-and-forward relaying system, consisting of a hybrid radio frequency (RF) and free-space optical (FSO) channels. We introduce an impairment model which is the soft envelope limiter (SEL). Additionally, we propose the partial relay selection (PRS) protocol with outdated channel state information (CSI) based on the kno…
▽ More
In this work, we provide a detailed analysis of a dual-hop fixed gain (FG) amplify-and-forward relaying system, consisting of a hybrid radio frequency (RF) and free-space optical (FSO) channels. We introduce an impairment model which is the soft envelope limiter (SEL). Additionally, we propose the partial relay selection (PRS) protocol with outdated channel state information (CSI) based on the knowledge of the RF channels in order to select one relay for the communication. Moreover, the RF channels of the first hop experience Rayleigh fading while we propose a unified fading model for the FSO channels, called the unified Gamma Gamma (GG), taking into account the atmospheric turbulence, the path loss and the misalignment between the transmitter and the receiver aperture also called the pointing error. Novel closed-forms of the outage probability (OP), the bit error probability (BEP) and the average ergodic capacity (EC) are derived in terms of Meijer-G and Fox-H functions. Capitalizing on these metrics, we also derive the asymptotical high signal-to-noise ratio (SNR) in order to get engineering insights into the impacts of the hardware impairments and the system parameters as well. Finally, using Monte Carlo simulations, we validate numerically the derived mathematical formulations.
△ Less
Submitted 15 January, 2019;
originally announced February 2019.
-
Aggregate Hardware Impairments Over Mixed RF/FSO Relaying Systems With Outdated CSI
Authors:
Elyes Balti,
Mohsen Guizani,
Bechir Hamdaoui,
Bassem Khalfi
Abstract:
In this paper, we propose a dual-hop RF (Radio-Frequency)/FSO (Free-Space Optical) system with multiple relays employing the Decode-and-Forward (DF) and Amplify-and-Forward (AF) with a Fixed Gain (FG) relaying scheme. The RF channels are subject to a Rayleigh distribution while the optical links experience a unified fading model emcopassing the atmospheric turbulence that follows the Málaga distri…
▽ More
In this paper, we propose a dual-hop RF (Radio-Frequency)/FSO (Free-Space Optical) system with multiple relays employing the Decode-and-Forward (DF) and Amplify-and-Forward (AF) with a Fixed Gain (FG) relaying scheme. The RF channels are subject to a Rayleigh distribution while the optical links experience a unified fading model emcopassing the atmospheric turbulence that follows the Málaga distribution (or also called the $\mathcal{M}$-distribution), the atmospheric path loss and the pointing error. Partial relay selection (PRS) with outdated channel state information (CSI) is proposed to select the candidate relay to forward the signal to the destination. At the reception, the detection of the signal can be achieved following either heterodyne or Intensity Modulation and Direct Detection (IM/DD). Many previous attempts neglected the impact of the hardware impairments and assumed ideal hardware. This assumption makes sense for low data rate systems but it would no longer be valid for high data rate systems. In this work, we propose a general model of hardware impairment to get insight into quantifying its effects on the system performance. We will demonstrate that the hardware impairments have small impact on the system performance for low signal-to-noise ratio (SNR), but it can be destructive at high SNR values. Furthermore analytical expressions and upper bounds are derived for the outage probability and ergodic capacity while the symbol error probability is obtained through the numerical integration method. Capitalizing on these metrics, we also derive the high SNR asymptotes to get valuable insight into the system gains such as the diversity and the coding gains. Finally, analytical and numerical results are presented and validated by Monte Carlo simulation.
△ Less
Submitted 15 January, 2019;
originally announced February 2019.
-
Impact of Non-Linear High-Power Amplifiers on Cooperative Relaying Systems
Authors:
Elyes Balti,
Mohsen Guizani
Abstract:
In this paper, we investigate the impact of the high-power amplifier non-linear distortion on multiple relay systems by introducing the soft envelope limiter, traveling wave tube amplifier, and solid-state power amplifier to the relays. The system employs amplify-and-forward either fixed or variable gain relaying and uses the opportunistic relay selection with outdated channel state information to…
▽ More
In this paper, we investigate the impact of the high-power amplifier non-linear distortion on multiple relay systems by introducing the soft envelope limiter, traveling wave tube amplifier, and solid-state power amplifier to the relays. The system employs amplify-and-forward either fixed or variable gain relaying and uses the opportunistic relay selection with outdated channel state information to select the best relay. The results show that the performance loss is small at low rates; however, it is significant for high rates. In particular, the outage probability and the bit error rate are saturated by an irreducible floor at high rates. The same analysis is pursued for the capacity and shows that it is saturated by a detrimental ceiling as the average signal-to-noise ratio becomes higher. This result contrasts the case of the ideal hardware where the capacity grows indefinitely. Moreover, the results show that the capacity ceiling is proportional to the impairment's parameter and for some special cases the impaired systems practically operate in acceptable conditions. Closed-forms and high SNR asymptotes of the outage probability, the bit error rate, and the capacity are derived. Finally, analytical expressions are validated by the Monte Carlo simulation.
△ Less
Submitted 15 January, 2019;
originally announced February 2019.
-
Mixed RF/FSO Cooperative Relaying Systems with Co-Channel Interference
Authors:
Elyes Balti,
Mohsen Guizani
Abstract:
In this paper, we provide a global framework analysis of a dual-hop mixed Radio Frequency (RF)/Free Space Optical (FSO) system with multiple branches/relays wherein the first and second hops, respectively, consist of RF and FSO channels. To cover various cases of fading, we propose generalized channels' models for RF and FSO links that follow the Nakagami-m and the Double Generalized Gamma (DGG) d…
▽ More
In this paper, we provide a global framework analysis of a dual-hop mixed Radio Frequency (RF)/Free Space Optical (FSO) system with multiple branches/relays wherein the first and second hops, respectively, consist of RF and FSO channels. To cover various cases of fading, we propose generalized channels' models for RF and FSO links that follow the Nakagami-m and the Double Generalized Gamma (DGG) distributions, respectively. Moreover, we suggest Channel State Information (CSI)-assisted relaying or variable relaying gain based Amplifiy-and-Forward (AF) amplification. Partial relay selection with outdated CSI is assumed as a relay selection protocol based on the knowledge of the RF CSI. In order to derive the end-to-end Signal-to-Interference-plus-Noise Ratio (SINR) statistics such as the Cumulative Distribution Function (CDF), the Probability Density Function (PDF), the higher order moments, the amount of fading and the Moment Generating Function (MGF), the numerical values of the fading severity parameters are only valid for integer values. Based on these statistics, we derive closed-forms of the outage probability, the bit error probability, the ergodic capacity and the outage capacity in terms of Meijer-G, univariate, bivariate and trivariate Fox-H functions. Capitalizing on these expressions, we derive the asymptotic high SNR to unpack valuable engineering insights of the system performance. Monte Carlo simulation is used to confirm the analytical expressions.
△ Less
Submitted 15 January, 2019;
originally announced February 2019.
-
Hybrid Rayleigh and Double-Weibull over Impaired RF/FSO System with Outdated CSI
Authors:
Elyes Balti,
Mohsen Guizani,
Bechir Hamdaoui
Abstract:
In this work, we present a global framework of a dual-hop RF/FSO system with multiple relays operating at the mode of amplify-and-forward (AF) with fixed gain. Partial relay selection (PRS) protocol with outdated channel state information (CSI) is assumed since the channels of the first hop are time-varying. The optical irradiance of the second hop are subject to the Double-Weibull model while the…
▽ More
In this work, we present a global framework of a dual-hop RF/FSO system with multiple relays operating at the mode of amplify-and-forward (AF) with fixed gain. Partial relay selection (PRS) protocol with outdated channel state information (CSI) is assumed since the channels of the first hop are time-varying. The optical irradiance of the second hop are subject to the Double-Weibull model while the RF channels of the first hop experience the Rayleigh fading. The signal reception is achieved either by heterodyne or intensity modulation and direct detection (IM/DD). In addition, we introduce an aggregate model of hardware impairments to the source (S) and the relays since they are not perfect nodes. In order to quantify the impairment impact on the system, we derive closed-form, approximate, upper bound and high signal-to-noise ratio (SNR) asymptotic of the outage probability (OP) and the ergodic capacity (EC). Finally, analytical and numerical results are in agreement using Monte Carlo simulation.
△ Less
Submitted 15 January, 2019;
originally announced February 2019.
-
Sub-6 GHz Microstrip Antenna: Design and Radiation Modeling
Authors:
Elyes Balti,
Brian K. Johnson
Abstract:
This paper presents a global framework analysis of a microstrip antenna design circularly polarized with an operating frequency of 5.80 GHz and a bandwidth of at least 500 MHz. We evaluate the optimal antenna parameters to design requirements. Capitalizing on these parameters, we simulate the radiation model of this antenna using the Finite Difference Time Domain (FDTD) technique assuming one, two…
▽ More
This paper presents a global framework analysis of a microstrip antenna design circularly polarized with an operating frequency of 5.80 GHz and a bandwidth of at least 500 MHz. We evaluate the optimal antenna parameters to design requirements. Capitalizing on these parameters, we simulate the radiation model of this antenna using the Finite Difference Time Domain (FDTD) technique assuming one, two, and three dimensions. The propagation medium is assumed to be a free space bounded by absorbing boundaries, and perfect matched layer (PML). The FDTD-1D is considered in free space while FDTD-2D and 3D are considered both in free space and in a free space-medium containing either dielectric sphere or cylinder in the center. In this case, we model the incident and the scattered electromagnetic fields reflected back from hitting the dielectric object. Moreover, the microstrip antenna radiates an electromagnetic pulse either in the middle or at one end of the medium and the sources considered are Gaussian pulse and plane wave. Finally, we provide the analytic solutions of the propagation models to confirm the accuracy of the FDTD simulation technique.
△ Less
Submitted 16 January, 2019;
originally announced January 2019.
-
Partial Relay Selection For Hybrid RF/FSO Systems with Hardware Impairments
Authors:
Elyes Balti,
Mohsen Guizani,
Bechir Hamdaoui,
Yassine Maalej
Abstract:
In this paper, we investigate the performance analysis of dual hop relaying system consisting of asymmetric Radio Frequency (RF)/Free Optical Space (FSO) links. The RF channels follow a Rayleigh distribution and the optical links are subject to Gamma-Gamma fading. We also introduce impairments to our model and we suggest Partial Relay Selection (PRS) protocol with Amplify-and-Forward (AF) fixed ga…
▽ More
In this paper, we investigate the performance analysis of dual hop relaying system consisting of asymmetric Radio Frequency (RF)/Free Optical Space (FSO) links. The RF channels follow a Rayleigh distribution and the optical links are subject to Gamma-Gamma fading. We also introduce impairments to our model and we suggest Partial Relay Selection (PRS) protocol with Amplify-and-Forward (AF) fixed gain relaying. The benefits of employing optical communication with RF, is to increase the system transfer rate and thus improving the system bandwidth. Many previous research attempts assuming ideal hardware (source, relays, etc.) without impairments. In fact, this assumption is still valid for low-rate systems. However, these hardware impairments can no longer be neglected for high-rate systems in order to get consistent results. Novel analytical expressions of outage probability and ergodic capacity of our model are derived taking into account ideal and non-ideal hardware cases. Furthermore, we study the dependence of the outage probability and the system capacity considering, the effect of the correlation between the outdated CSI (Channel State Information) and the current source-relay link, the number of relays, the rank of the selected relay and the average optical Signal to Noise Ratio (SNR) over weak and strong atmospheric turbulence. We also demonstrate that for a non-ideal case, the end-to-end Signal to Noise plus Distortion Ratio (SNDR) has a certain ceiling for high SNR range. However, the SNDR grows infinitely for the ideal case and the ceiling caused by impairments no longer exists. Finally, numerical and simulation results are presented.
△ Less
Submitted 15 January, 2019;
originally announced January 2019.
-
Asymmetric RF/FSO Relaying with HPA non-Linearities and Feedback Delay Constraints
Authors:
Elyes Balti,
Brian K. Johnson
Abstract:
In this work, we investigate the performance of a dual-hop multiple relays system consisting of mixed Radio-Frequency (RF)/Free Space Optical (FSO) channels. The RF channels are subject to Rayleigh fading while the optical links experience the Double Generalized Gamma including atmospheric turbulence, path loss and the misalignment between the transmitter and the receiver aperture (also known as t…
▽ More
In this work, we investigate the performance of a dual-hop multiple relays system consisting of mixed Radio-Frequency (RF)/Free Space Optical (FSO) channels. The RF channels are subject to Rayleigh fading while the optical links experience the Double Generalized Gamma including atmospheric turbulence, path loss and the misalignment between the transmitter and the receiver aperture (also known as the pointing error). The FSO model also takes into account the receiver detection technique which could be either heterodyne or intensity modulation and direct detection. Partial Relay Selection with outdated Channel State Information is assumed based on the RF channels to select a relay and we also consider fixed and variable Amplify-and-Forward relaying schemes. In addition, we assume that the relays are affected by the high power amplifier non-linearities and herein we discuss two power amplifiers called Soft Envelope Limiter and Traveling Wave Tube Amplifier. Furthermore, novel closed-forms and tight upper bounds of the outage probability, the bit error probability, and the ergodic capacity are derived. Capitalizing on these performance, we derive the high SNR asymptotic to get engineering insights about the system gains such as the diversity and the coding gains. Finally, the mathematical expressions are validated using the Monte Carlo simulation.
△ Less
Submitted 18 January, 2019; v1 submitted 14 January, 2019;
originally announced January 2019.