-
What is the Q of a Blackbody? A small contribution to Gustav Robert Kirchhoff's bicentennial
Authors:
Arthur Ballato,
John Ballato
Abstract:
The blackbody spectrum "half-power points" are used to assign effective Q "quality factor" values that are found to be less than unity whether frequency or wavelength scaling is used. A comparison with values for coherent oscillators is made. This exercise blends two of Kirchhoff's interests, and is instructive in its own right, as it bridges the often mutually exclusive engineering and scientific…
▽ More
The blackbody spectrum "half-power points" are used to assign effective Q "quality factor" values that are found to be less than unity whether frequency or wavelength scaling is used. A comparison with values for coherent oscillators is made. This exercise blends two of Kirchhoff's interests, and is instructive in its own right, as it bridges the often mutually exclusive engineering and scientific disciplines.
△ Less
Submitted 11 March, 2024; v1 submitted 9 February, 2024;
originally announced February 2024.
-
Post-2000 Nonlinear Optical Materials and Measurements: Data Tables and Best Practices
Authors:
Nathalie Vermeulen,
Daniel Espinosa,
Adam Ball,
John Ballato,
Philippe Boucaud,
Georges Boudebs,
Cecilia L. A. V. Campos,
Peter Dragic,
Anderson S. L. Gomes,
Mikko J. Huttunen,
Nathaniel Kinsey,
Rich Mildren,
Dragomir Neshev,
Lazaro Padilha,
Minhao Pu,
Ray Secondo,
Eiji Tokunaga,
Dmitry Turchinovich,
**gshi Yan,
Kresten Yvind,
Ksenia Dolgaleva,
Eric W. Van Stryland
Abstract:
In its 60 years of existence, the field of nonlinear optics has gained momentum especially over the past two decades thanks to major breakthroughs in material science and technology. In this article, we present a new set of data tables listing nonlinear-optical properties for different material categories as reported in the literature since 2000. The papers included in the data tables are represen…
▽ More
In its 60 years of existence, the field of nonlinear optics has gained momentum especially over the past two decades thanks to major breakthroughs in material science and technology. In this article, we present a new set of data tables listing nonlinear-optical properties for different material categories as reported in the literature since 2000. The papers included in the data tables are representative experimental works on bulk materials, solvents, 0D-1D-2D materials, metamaterials, fiber waveguiding materials, on-chip waveguiding materials, hybrid waveguiding systems, and materials suitable for nonlinear optics at THz frequencies. In addition to the data tables, we also provide best practices for performing and reporting nonlinear-optical experiments. These best practices underpin the selection process that was used for including papers in the tables. While the tables indeed show strong advancements in the field over the past two decades, we encourage the nonlinear-optics community to implement the identified best practices in future works. This will allow a more adequate comparison, interpretation and use of the published parameters, and as such further stimulate the overall progress in nonlinear-optical science and applications.
△ Less
Submitted 21 May, 2023; v1 submitted 15 January, 2023;
originally announced January 2023.
-
Optical Characterization of Disordered Yb-doped Silica Glass Anderson Localizing Optical Fiber
Authors:
Cody Bassett,
Matthew Tuggle,
Johan Ballato,
Arash Mafi
Abstract:
We investigate and report the optical and laser characteristics of a ytterbium-doped transverse Anderson localizing optical fiber to develop a fundamental understanding of the light propagation, generation, and amplification processes in this novel fiber. Ultimately, the goal based on the measurements and calculations conducted herein is to design and build a random fiber laser with a highly direc…
▽ More
We investigate and report the optical and laser characteristics of a ytterbium-doped transverse Anderson localizing optical fiber to develop a fundamental understanding of the light propagation, generation, and amplification processes in this novel fiber. Ultimately, the goal based on the measurements and calculations conducted herein is to design and build a random fiber laser with a highly directional beam. The measurements are based on certain observations of the laser pump propagation and amplified spontaneous emission generation in this fiber. Judicious approximations are used in the propagation equations to obtain the relevant desired parameters in simple theoretical fits to the experimental observations, without resorting to speculations based on the intended construction from the fiber preform.
△ Less
Submitted 23 September, 2021;
originally announced September 2021.
-
Low-loss silicon core fibre platform for broadband nonlinear photonics in the mid-infrared
Authors:
H. Ren,
L. Shen,
A. F. J. Runge,
T. W. Hawkins,
J. Ballato,
U. Gibson,
A. C. Peacock
Abstract:
Broadband mid-infrared light sources are highly desired for wide-ranging applications that span free-space communications to spectroscopy. In recent years, silicon has attracted great interest as a platform for nonlinear optical wavelength conversion in this region, owing to its low losses (linear and nonlinear) and high stability. However, most research in this area has made use of small core wav…
▽ More
Broadband mid-infrared light sources are highly desired for wide-ranging applications that span free-space communications to spectroscopy. In recent years, silicon has attracted great interest as a platform for nonlinear optical wavelength conversion in this region, owing to its low losses (linear and nonlinear) and high stability. However, most research in this area has made use of small core waveguides fabricated from the silicon-on-insulator platform, which suffer from high absorption losses of the silica cladding, limiting their ability to generate light beyond 3 $μ$m. Here we design and demonstrate a compact silicon core, silica clad waveguide platform that has low losses across the entire silicon transparency window. The waveguides are fabricated from a silicon core fibre that has been tapered to engineer the mode properties to ensure efficient nonlinear propagation in the core with minimal interaction of the mid-infrared light with the cladding. These waveguides exhibit many benefits of fibre platforms, such as high coupling efficiency and power handling capabilities, allowing for the generation of mid-infrared supercontinuum spectra with high brightness and coherence spanning almost two octaves (1.6-5.3 $μ$m).
△ Less
Submitted 18 March, 2019;
originally announced March 2019.
-
Advances in Disordered Transverse Anderson Localizing Optical Fibers
Authors:
Arash Mafi,
Matthew Tuggle,
Cody Bassett,
Esmaeil Mobini,
John Ballato
Abstract:
Disordered transverse Anderson localizing optical fibers have shown great promise in various applications from image transport to random lasing. Their success is due to their novel waveguiding behavior, which is enabled by the transverse Anderson localization of light. The strong transverse scattering from the transversely disordered refractive index structure results in transversely confined mode…
▽ More
Disordered transverse Anderson localizing optical fibers have shown great promise in various applications from image transport to random lasing. Their success is due to their novel waveguiding behavior, which is enabled by the transverse Anderson localization of light. The strong transverse scattering from the transversely disordered refractive index structure results in transversely confined modes that can freely propagate in the longitudinal direction. Therefore, these fibers behave like large-core highly multimode optical fibers, with the peculiar property that most modes are highly localized. This property makes them ideal for such applications as image transport and spatial beam multiplexing. In this review paper, we will explore some of the recent advances in these fibers, especially those related to the material structure and fabrication methods.
△ Less
Submitted 4 March, 2019;
originally announced March 2019.
-
Nonlinear optical properties of polycrystalline silicon core fibers from Telecom wavelengths into the mid-infrared spectral region
Authors:
Haonan Ren,
Li Shen,
Dong Wu,
Ozan Aktas,
Thomas Hawkins,
John Ballato,
Ursula Gibson,
Anna Peacock
Abstract:
Polycrystalline silicon core fibers (SCFs) fabricated via the molten core drawing (MCD) method are emerging as a flexible optoelectronic platform. Here, the optical transmission properties of MCD SCFs that have been tapered down to a few micrometer-sized core dimensions are characterized from the Telecom band to the mid-infrared spectal regime. The SCFs exhibit low linear losses on the order of a…
▽ More
Polycrystalline silicon core fibers (SCFs) fabricated via the molten core drawing (MCD) method are emerging as a flexible optoelectronic platform. Here, the optical transmission properties of MCD SCFs that have been tapered down to a few micrometer-sized core dimensions are characterized from the Telecom band to the mid-infrared spectal regime. The SCFs exhibit low linear losses on the order of a few dB/cm over the entire wavelength range. Characterization of the two-photon absorption coefficient \b{eta}_TPA and nonlinear refractive index n_2 of the SCFs reveals values consistent with previous measurements of single crystal silicon materials, indicating the high optical quality of the polysilicon core material. The high nonlinear figure of merit obtained for wavelengths above 2μm highlight the potential for these fibers to find application in infrared nonlinear photonics.
△ Less
Submitted 13 February, 2019;
originally announced February 2019.
-
Disordered Anderson Localization Optical Fibers for Image Transport - A Review
Authors:
Arash Mafi,
John Ballato,
Karl W. Koch,
Axel Schulzgen
Abstract:
Disordered optical fibers show novel waveguiding properties, enabled by the transverse Anderson localization of light, and are used for image transport. The strong transverse scattering from the transversely disordered refractive index structure results in transversely confined modes that can freely propagate in the longitudinal direction. In some sense, an Anderson localization disordered fiber b…
▽ More
Disordered optical fibers show novel waveguiding properties, enabled by the transverse Anderson localization of light, and are used for image transport. The strong transverse scattering from the transversely disordered refractive index structure results in transversely confined modes that can freely propagate in the longitudinal direction. In some sense, an Anderson localization disordered fiber behave like a large-core multimode optical fiber, with the advantage, that most modes are highly localized in the transverse plane, so any point in the cross section of the fiber can be used for localized beam transport. This property has been used for high-quality transportation of intensity patterns and images in these optical fibers. This review covers the basics and the history of the transverse Anderson localization in disordered optical fibers and captures the recent progress in imaging applications using these optical fibers.
△ Less
Submitted 1 February, 2019;
originally announced February 2019.
-
Random lasing in an Anderson localizing optical fiber
Authors:
Behnam Abaie,
Esmaeil Mobini,
Salman Karbasi,
Thomas Hawkins,
John Ballato,
Arash Mafi
Abstract:
A directional random laser mediated by transverse Anderson localization in a disordered glass optical fiber is reported. Previous demonstrations of random lasers have found limited applications because of their multi-directionality and chaotic fluctuations in the laser emission. The random laser presented in this paper operates in the Anderson localization regime. The disorder induced localized st…
▽ More
A directional random laser mediated by transverse Anderson localization in a disordered glass optical fiber is reported. Previous demonstrations of random lasers have found limited applications because of their multi-directionality and chaotic fluctuations in the laser emission. The random laser presented in this paper operates in the Anderson localization regime. The disorder induced localized states form isolated local channels that make the output laser beam highly directional and stabilize its spectrum. The strong transverse disorder and longitudinal invariance result in isolated lasing modes with negligible interaction with their surroundings, traveling back and forth in a Fabry-Perot cavity formed by the air-fiber interfaces. It is shown that if a localized input pump is scanned across the disordered fiber input facet, the output laser signal follows the transverse position of the pump. Moreover, a uniformly distributed pump across the input facet of the disordered fiber generates a laser signal with very low spatial coherence that can be of practical importance in many optical platforms including image transport with fiber bundles.
△ Less
Submitted 2 June, 2017; v1 submitted 12 December, 2016;
originally announced December 2016.
-
Image transport through a disordered optical fiber mediated by transverse Anderson localization
Authors:
Salman Karbasi,
Ryan J. Frazier,
Karl W. Koch,
Thomas Hawkins,
John Ballato,
Arash Mafi
Abstract:
Transverse Anderson localization of light allows localized optical-beam-transport through a transversely-disordered and longitudinally-invariant medium. Its successful implementation in disordered optical fibers recently resulted in the propagation of localized beams of radii comparable with that of conventional optical fibers. We present what is, to the best of our knowledge, the first demonstrat…
▽ More
Transverse Anderson localization of light allows localized optical-beam-transport through a transversely-disordered and longitudinally-invariant medium. Its successful implementation in disordered optical fibers recently resulted in the propagation of localized beams of radii comparable with that of conventional optical fibers. We present what is, to the best of our knowledge, the first demonstration of optical image transport using transverse Anderson localization of light. The image transport quality obtained in the polymer disordered optical fiber is comparable with or better than some of the best commercially available multicore image fibers with less pixelation and higher contrast. It is argued that considerable improvement in image transport quality can be obtained in a disordered fiber made from a glass matrix with near wavelength-size randomly distributed air-holes with an air-hole fill-fraction of $50\%$. Our results open the way to device-level implementation of the transverse Anderson localization of light with potential applications in biological and medical imaging.
△ Less
Submitted 12 December, 2013; v1 submitted 16 July, 2013;
originally announced July 2013.
-
Terahertz Waveguiding in Silicon-Core Fibers
Authors:
Derek A. Bas,
Scott K. Cushing,
John Ballato,
Alan D. Bristow
Abstract:
We propose the use of a silicon-core optical fiber for terahertz (THz) waveguide applications. Finite-difference time-domain simulations have been performed based on a cylindrical waveguide with a silicon core and silica cladding. High-resistivity silicon has a flat dispersion over a 0.1 - 3 THz range, making it viable for propagation of tunable narrowband CW THz and possibly broadband picosecond…
▽ More
We propose the use of a silicon-core optical fiber for terahertz (THz) waveguide applications. Finite-difference time-domain simulations have been performed based on a cylindrical waveguide with a silicon core and silica cladding. High-resistivity silicon has a flat dispersion over a 0.1 - 3 THz range, making it viable for propagation of tunable narrowband CW THz and possibly broadband picosecond pules of THz radiation. Simulations show the propagation dynamics and the integrated intensity, from which transverse mode profiles and absorption lengths are extraced. It is found that for 140 - 250 micron core diameters the mode is primarily confined to the core, such that the overall absorbance is only slightly less than in bulk polycrystalline silicon.
△ Less
Submitted 2 May, 2013;
originally announced May 2013.
-
Frozen light in periodic stacks of anisotropic layers
Authors:
J. Ballato,
A. Ballato,
A. Figotin,
I. Vitebskiy
Abstract:
We consider a plane electromagnetic wave incident on a periodic stack of dielectric layers. One of the alternating layers has an anisotropic refractive index with an oblique orientation of the principal axis relative to the normal to the layers. It was shown recently (A. Figotin and I. Vitebskiy, Phys. Rev. E68, 036609 2003) that an obliquely incident light, upon entering such a periodic stack,…
▽ More
We consider a plane electromagnetic wave incident on a periodic stack of dielectric layers. One of the alternating layers has an anisotropic refractive index with an oblique orientation of the principal axis relative to the normal to the layers. It was shown recently (A. Figotin and I. Vitebskiy, Phys. Rev. E68, 036609 2003) that an obliquely incident light, upon entering such a periodic stack, can be converted into an abnormal axially frozen mode with drastically enhanced amplitude and zero normal component of the group velocity. The stack reflectivity at this point can be very low, implying nearly total conversion of the incident light into the frozen mode with huge energy density, compared to that of the incident light. Supposedly, the frozen mode regime requires strong birefringence in the anisotropic layers - by an order of magnitude stronger than that available in common anisotropic dielectric materials. In this paper we show how to overcome the above problem by exploiting higher frequency bands of the photonic spectrum. We prove that a robust frozen mode regime at optical wavelengths can be realized in stacks composed of common anisotropic materials, such as YVO₄, LiNb, CaCO₃, and the like.
△ Less
Submitted 30 September, 2004;
originally announced October 2004.
