Showing 1–18 of 18 results for author: Balke, N

Ionic control over ferroelectricity in 2D layered van der Waals capacitors

Authors: Sabine M. Neumayer, Mengwei Si, Junkang Li, Pai-Ying Liao, Lei Tao, Andrew O'Hara, Sokrates T. Pantelides, Peide D. Ye, Petro Maksymovych, Nina Balke

Abstract: The van der Waals layered material CuInP2S6 features interesting functional behavior, including the existence of four uniaxial polarization states, polarization reversal against the electric field through Cu ion migration, a negative-capacitance regime, and reversible extraction of Cu ions. At the heart of these characteristics lies the high mobility of Cu ions, which also determines the spontaneo… ▽ More The van der Waals layered material CuInP2S6 features interesting functional behavior, including the existence of four uniaxial polarization states, polarization reversal against the electric field through Cu ion migration, a negative-capacitance regime, and reversible extraction of Cu ions. At the heart of these characteristics lies the high mobility of Cu ions, which also determines the spontaneous polarization. Therefore, Cu migration across the lattice results in unusual ferroelectric behavior. Here, we demonstrate how the interplay of polar and ionic properties provides a path to ionically controlled ferroelectric behavior, achieved by applying selected DC voltage pulses and subsequently probing ferroelectric switching during fast triangular voltage sweeps. Using current measurements and theoretical calculations, we observe that increasing DC pulse duration results in higher ionic currents, the build-up of an internal electric field that shifts polarization loops, and an increase in total switchable polarization by ~50% due to the existence of a high polarization phase which is stabilized by the internal electric field. Apart from tuning ferroelectric behavior by selected square pulses, hysteretic polarization switching can even be entirely deactivated and reactivated, resulting in three-state systems where polarization switching is either inhibited or can be performed in two different directions. △ Less

Submitted 19 January, 2022; v1 submitted 27 September, 2021; originally announced September 2021.

Journal ref: ACS Appl. Mater. Interfaces 2022, 14, 2, 3018-3026

Unique features of polarization in ferroelectric ionic conductors

Authors: Andrew O'Hara, Nina Balke, Sokrates T. Pantelides

Abstract: Ferroelectrics that are also ionic conductors offer possibilities for novel applications with high tunability, especially if the same atomic species causes both phenomena. In particular, at temperatures just below the Curie temperature, polarized states may be sustainable as the mobile species is driven in a controlled way over the energy barrier that governs ionic conduction, resulting in unique… ▽ More Ferroelectrics that are also ionic conductors offer possibilities for novel applications with high tunability, especially if the same atomic species causes both phenomena. In particular, at temperatures just below the Curie temperature, polarized states may be sustainable as the mobile species is driven in a controlled way over the energy barrier that governs ionic conduction, resulting in unique control of the polarization. This possibility was recently demonstrated in CuInP2S6, a layered ferroelectric ionic conductor in which Cu ions cause both ferroelectricity and ionic conduction. Here, we show that the commonly used approach to calculate the polarization of evolving atomic configurations in ferroelectrics using the modern theory of polarization, namely concerted (synchronous) migration of the displacing ions, is not well suited to describe the polarization evolution as the Cu ions cross the van der Waals gaps. We introduce an asynchronous Cu-migration scheme, which reflects the physical process by which Cu ions migrate, resolves the difficulties, and describes the polarization evolution both for normal ferroelectric switching and for transitions across the van der Waals gaps, providing a single framework to discuss ferroelectric ionic conductors. △ Less

Submitted 20 July, 2021; v1 submitted 20 July, 2021; originally announced July 2021.

Comments: 11 pages, 5 figures

Journal ref: Adv. Electron. Mater. 2100810 (2021)

Fast Scanning Probe Microscopy via Machine Learning: Non-rectangular scans with compressed sensing and Gaussian process optimization

Authors: Kyle P. Kelley, Maxim Ziatdinov, Liam Collins, Michael A. Susner, Rama K. Vasudevan, Nina Balke, Sergei V. Kalinin, Stephen Jesse

Abstract: Fast scanning probe microscopy enabled via machine learning allows for a broad range of nanoscale, temporally resolved physics to be uncovered. However, such examples for functional imaging are few in number. Here, using piezoresponse force microscopy (PFM) as a model application, we demonstrate a factor of 5.8 improvement in imaging rate using a combination of sparse spiral scanning with compress… ▽ More Fast scanning probe microscopy enabled via machine learning allows for a broad range of nanoscale, temporally resolved physics to be uncovered. However, such examples for functional imaging are few in number. Here, using piezoresponse force microscopy (PFM) as a model application, we demonstrate a factor of 5.8 improvement in imaging rate using a combination of sparse spiral scanning with compressive sensing and Gaussian processing reconstruction. It is found that even extremely sparse scans offer strong reconstructions with less than 6 % error for Gaussian processing reconstructions. Further, we analyze the error associated with each reconstructive technique per reconstruction iteration finding the error is similar past approximately 15 iterations, while at initial iterations Gaussian processing outperforms compressive sensing. This study highlights the capabilities of reconstruction techniques when applied to sparse data, particularly sparse spiral PFM scans, with broad applications in scanning probe and electron microscopies. △ Less

Submitted 23 April, 2020; originally announced April 2020.

To switch or not to switch -- a machine learning approach for ferroelectricity

Authors: Sabine M. Neumayer, Stephen Jesse, Gabriel Velarde, Andrei L. Kholkin, Ivan Kravchenko, Lane W. Martin, Nina Balke, Peter Maksymovych

Abstract: With the advent of increasingly elaborate experimental techniques in physics, chemistry and materials sciences, measured data are becoming bigger and more complex. The observables are typically a function of several stimuli resulting in multidimensional data sets spanning a range of experimental parameters. As an example, a common approach to study ferroelectric switching is to observe effects of… ▽ More With the advent of increasingly elaborate experimental techniques in physics, chemistry and materials sciences, measured data are becoming bigger and more complex. The observables are typically a function of several stimuli resulting in multidimensional data sets spanning a range of experimental parameters. As an example, a common approach to study ferroelectric switching is to observe effects of applied electric field, but switching can also be enacted by pressure and is influenced by strain fields, material composition, temperature, time, etc. Moreover, the parameters are usually interdependent, so that their decoupling toward univariate measurements or analysis may not be straightforward. On the other hand, both explicit and hidden parameters provide an opportunity to gain deeper insight into the measured properties, provided there exists a well-defined path to capture and analyze such data. Here, we introduce a new, two-dimensional approach to represent hysteretic response of a material system to applied electric field. Utilizing ferroelectric polarization as a model hysteretic property, we demonstrate how explicit consideration of electromechanical response to two rather than one control voltages enables significantly more transparent and robust interpretation of observed hysteresis, such as differentiating between charge trap** and ferroelectricity. Furthermore, we demonstrate how the new data representation readily fits into a variety of machinelearning methodologies, from unsupervised classification of the origins of hysteretic response via linear clustering algorithms to neural-network-based inference of the sample temperature based on the specific morphology of hysteresis. △ Less

Submitted 17 April, 2020; originally announced April 2020.

Dynamic manipulation in piezoresponse force microscopy: creating non-equilibrium phases with large electromechanical response

Authors: Kyle P. Kelley, Yao Ren, Anna N. Morozovska, Eugene A. Eliseev, Yoshitaka Ehara, Hiroshi Funakubo, Thierry Giamarchi, Nina Balke, Rama K. Vasudevan, Ye Cao, Stephen Jesse, Sergei V. Kalinin

Abstract: Domains walls and topological defects in ferroelectric materials have emerged as a powerful new paradigm for functional electronic devices including memory and logic. Similarly, wall interactions and dynamics underpin a broad range of mesoscale phenomena ranging from giant electromechanical responses to memory effects. Exploring the functionalities of individual domain walls, their interactions, a… ▽ More Domains walls and topological defects in ferroelectric materials have emerged as a powerful new paradigm for functional electronic devices including memory and logic. Similarly, wall interactions and dynamics underpin a broad range of mesoscale phenomena ranging from giant electromechanical responses to memory effects. Exploring the functionalities of individual domain walls, their interactions, and controlled modifications of the domain structures is crucial for applications and fundamental physical studies. However, the dynamic nature of these features severely limits studies of their local physics since application of local biases or pressures in piezoresponse force microscopy induce wall displacement as a primary response. Here, we introduce a fundamentally new approach for the control and modification of domain structures based on automated experimentation whereby real space image-based feedback is used to control the tip bias during ferroelectric switching, allowing for modification routes conditioned on domain states under the tip. This automated experiment approach is demonstrated for the exploration of domain wall dynamics and creation of metastable phases with large electromechanical response. △ Less

Submitted 10 January, 2020; originally announced January 2020.

Piezoresponse phase as variable in electromechanical characterization

Authors: Sabine M. Neumayer, Sahar Saremi, Lane W. Martin, Liam Collins, Alexander Tselev, Stephen Jesse, Sergei V. Kalinin, Nina Balke

Abstract: Piezoresponse force microscopy (PFM) is a powerful characterization technique to readily image and manipulate ferroelectrics domains. PFM gives insight into the strength of local piezoelectric coupling as well as polarization direction through PFM amplitude and phase, respectively. Converting measured arbitrary units to physical material parameters, however, remains a challenge. While much effort… ▽ More Piezoresponse force microscopy (PFM) is a powerful characterization technique to readily image and manipulate ferroelectrics domains. PFM gives insight into the strength of local piezoelectric coupling as well as polarization direction through PFM amplitude and phase, respectively. Converting measured arbitrary units to physical material parameters, however, remains a challenge. While much effort has been spent on quantifying the PFM amplitude signal, little attention has been given to the PFM phase and it is often arbitrarily adjusted to fit expectations or processed as recorded. This is problematic when investigating materials with unknown or potentially negative sign of the probed effective electrostrictive coefficient or strong frequency dispersion of electromechanical responses since assumptions about the phase cannot be reliably made. The PFM phase can, however, provide important information on the polarization orientation and the sign of the electrostrictive coefficient. Most notably, the orientation of the PFM hysteresis loop is determined by the PFM phase. Moreover, when presenting PFM data as a combined signal, the resulting response can be artificially lowered or asymmetric if the phase data has not been correctly processed. Here, we demonstrate a path to identify the phase offset required to extract correct meaning from PFM phase data. We explore different sources of phase offsets including the experimental setup, instrumental contributions, and data analysis. We discuss the physical working principles of PFM and develop a strategy to extract physical meaning from the PFM phase. The proposed procedures are verified on two materials with positive and negative piezoelectric coefficients. △ Less

Submitted 6 December, 2019; originally announced December 2019.

Comments: 16 pages, 6 figures

Competing Phases in Epitaxial Vanadium Dioxide at Nanoscale

Authors: Yogesh Sharma, Martin V. Holt, Nouamane Laanait, Xiang Gao, Ilia Ivanov, Liam Collins, Changhee Sohn, Zhaoliang Liao, Elizabeth Skoropata, Sergei V. Kalinin, Nina Balke, Gyula Eres, Thomas Z. Ward, Ho Nyung Lee

Abstract: Phase competition in correlated oxides offers tantalizing opportunities as many intriguing physical phenomena occur near the phase transitions. Owing to a sharp metal-insulator transition (MIT) near room temperature, correlated vanadium dioxide (VO2) exhibits a strong competition between insulating and metallic phases that is important for practical applications. However, the phase boundary underg… ▽ More Phase competition in correlated oxides offers tantalizing opportunities as many intriguing physical phenomena occur near the phase transitions. Owing to a sharp metal-insulator transition (MIT) near room temperature, correlated vanadium dioxide (VO2) exhibits a strong competition between insulating and metallic phases that is important for practical applications. However, the phase boundary undergoes strong modification when strain is involved, yielding complex phase transitions. Here, we report the emergence of the nanoscale M2 phase domains in VO2 epitaxial films under anisotropic strain relaxation. The phase states of the films are imaged by multi-length-scale probes, detecting the structural and electrical properties in individual local domains. Competing evolution of the M1 and M2 phases indicates a critical role of lattice-strain on both the stability of the M2 Mott phase and the energetics of the MIT in VO2 films. This study demonstrates how strain engineering can be utilized to design phase states, which allow deliberate control of MIT behavior at the nanoscale in epitaxial VO2 films. △ Less

Submitted 13 August, 2019; originally announced August 2019.

Room Temperature Electrocaloric Effect in Layered Ferroelectric CuInP2S6 for Solid State Refrigeration

Authors: Mengwei Si, Atanu K. Saha, Pai-Ying Liao, Shengjie Gao, Sabine M. Neumayer, Jie Jian, **gkai Qin, Nina Balke, Haiyan Wang, Petro Maksymovych, Wenzhuo Wu, Sumeet K. Gupta, Peide D. Ye

Abstract: A material with reversible temperature change capability under an external electric field, known as the electrocaloric effect (ECE), has long been considered as a promising solid-state cooling solution. However, electrocaloric (EC) performance of EC materials generally is not sufficiently high for real cooling applications. As a result, exploring EC materials with high performance is of great inte… ▽ More A material with reversible temperature change capability under an external electric field, known as the electrocaloric effect (ECE), has long been considered as a promising solid-state cooling solution. However, electrocaloric (EC) performance of EC materials generally is not sufficiently high for real cooling applications. As a result, exploring EC materials with high performance is of great interest and importance. Here, we report on the ECE of ferroelectric materials with van der Waals layered structure (CuInP2S6 or CIPS in this work in particular). Over 60% polarization charge change is observed within a temperature change of only 10 K at Curie temperature. Large adiabatic temperature change (|ΔT|) of 3.3 K, isothermal entropy change (|ΔS|) of 5.8 J kg-1 K-1 at |ΔE|=142.0 kV cm-1 at 315 K (above and near room temperature) are achieved, with a large EC strength (|ΔT|/|ΔE|) of 29.5 mK cm kV-1. The ECE of CIPS is also investigated theoretically by numerical simulation and a further EC performance projection is provided. △ Less

Submitted 13 September, 2019; v1 submitted 19 January, 2019; originally announced January 2019.

Comments: 32 pages, 10 figures

Journal ref: ACS Nano 2019, 13, 8, 8760-8765

Giant negative electrostriction and dielectric tunability in a van der Waals layered ferroelectric

Authors: Sabine M. Neumayer, Eugene A. Eliseev, Michael A. Susner, Alexander Tselev, Brian J. Rodriguez, John A. Brehm, Sokrates T. Pantelides, Ganesh Panchapakesan, Stephen Jesse, Sergei V. Kalinin, Michael A. McGuire, Anna N. Morozovska, Petro Maksymovych, Nina Balke

Abstract: The interest in ferroelectric van der Waals crystals arises from the potential to realize ultrathin ferroic systems owing to the reduced surface energy of these materials and the layered structure that allows for exfoliation. Here, we quantitatively unravel giant negative electrostriction of van der Waals layered copper indium thiophosphate (CIPS), which exhibits an electrostrictive coefficient Q3… ▽ More The interest in ferroelectric van der Waals crystals arises from the potential to realize ultrathin ferroic systems owing to the reduced surface energy of these materials and the layered structure that allows for exfoliation. Here, we quantitatively unravel giant negative electrostriction of van der Waals layered copper indium thiophosphate (CIPS), which exhibits an electrostrictive coefficient Q33 as high as -3.2 m4/C2 and a resulting bulk piezoelectric coefficient d33 up to -85 pm/V. As a result, the electromechanical response of CIPS is comparable in magnitude to established perovskite ferroelectrics despite possessing a much smaller spontaneous polarization of only a few uC/cm2. In the paraelectric state, readily accessible owing to low transition temperatures, CIPS exhibits large dielectric tunability, similar to widely-used barium strontium titanate, and as a result both giant and continuously tunable electromechanical response. The persistence of electrostrictive and tunable responses in the paraelectric state indicates that even few layer films or nanoparticles will sustain significant electromechanical functionality, offsetting the inevitable suppression of ferroelectric properties in the nanoscale limit. These findings can likely be extended to other ferroelectric transition metal thiophosphates and (quasi-) two-dimensional materials and might facilitate the quest towards novel ultrathin functional devices incorporating electromechanical response. △ Less

Submitted 1 February, 2019; v1 submitted 21 March, 2018; originally announced March 2018.

Comments: Published version in Phys. Rev. Materials https://journals.aps.org/prmaterials/abstract/10.1103/PhysRevMaterials.3.024401

Journal ref: Phys. Rev. Materials 3, 024401 (2019)

Ferroelectric or non-ferroelectric: why so many materials exhibit ferroelectricity on the nanoscale

Authors: Rama K. Vasudevan, Nina Balke, Peter Maksymovych, Stephen Jesse, Sergei V. Kalinin

Abstract: Ferroelectric materials have remained one of the foci of condensed matter physics and materials science for over 50 years. In the last 20 years, the development of voltage-modulated scanning probe microscopy techniques, exemplified by Piezoresponse force microscopy (PFM) and associated time and voltage spectroscopies, opened a pathway to explore these materials on a single-digit nanometer level. C… ▽ More Ferroelectric materials have remained one of the foci of condensed matter physics and materials science for over 50 years. In the last 20 years, the development of voltage-modulated scanning probe microscopy techniques, exemplified by Piezoresponse force microscopy (PFM) and associated time and voltage spectroscopies, opened a pathway to explore these materials on a single-digit nanometer level. Consequently, domain structures, walls and polarization dynamics can now be imaged in real space. More generally, PFM has allowed studying electromechanical coupling in a broad variety of materials ranging from ionics to biological systems. It can also be anticipated that the recent Nobel prize in molecular electromechanical machines will result in rapid growth in interest in PFM as a method to probe their behavior on single device and device assembly levels. However, the broad introduction of PFM also resulted in a growing number of reports on nearly ubiquitous presence of ferroelectric-like phenomena including remnant polar states and electromechanical hysteresis loops in materials which are non-ferroelectric in the bulk, or in cases where size effects are expected to suppress ferroelectricity. While in certain cases plausible physical mechanisms can be suggested, there is remarkable similarity in observed behaviors, irrespective of the materials system. In this review, we summarize the basic principles of PFM, briefly discuss the features of ferroelectric surfaces salient to PFM imaging and spectroscopy, and summarize existing reports on ferroelectric like responses in non-classical ferroelectric materials. We further discuss possible mechanisms behind observed behaviors, and possible experimental strategies for their identification. △ Less

Submitted 4 January, 2017; originally announced January 2017.

Comments: 74 pages, 16 figures

Quantification of Probe-Sample Electrostatic Forces with Dynamic Atomic Force Microscopy

Authors: Nina Balke, Stephen Jesse, Ben Carmichael, M. Baris Okatan, Ivan I. Kravchenko, Sergei V. Kalinin, Alexander Tselev

Abstract: Atomic Force Microscopy (AFM) methods utilizing resonant mechanical vibrations of cantilevers in contact with a sample surface have shown sensitivities as high as few picometers for detecting surface displacements. Such a high sensitivity is harnessed in several AFM imaging modes. Here, we demonstrate a cantilever-resonance-based method to quantify electrostatic forces on a probe arising in the pr… ▽ More Atomic Force Microscopy (AFM) methods utilizing resonant mechanical vibrations of cantilevers in contact with a sample surface have shown sensitivities as high as few picometers for detecting surface displacements. Such a high sensitivity is harnessed in several AFM imaging modes. Here, we demonstrate a cantilever-resonance-based method to quantify electrostatic forces on a probe arising in the presence of a surface potential or when a bias voltage is applied to the AFM probe. We find that the electrostatic forces acting on the probe tip apex can strongly dominate cantilever response in electromechanical measurements and produce signals equivalent to few pm of surface displacement. In combination with modeling, the measurements of the force were used to determine the strength of the electrical field at the probe tip apex in contact with a sample. We find an evidence that the electric field strength in the junctions is limited by about 0.5 V/nm. This field can be sufficiently strong to significantly influence material states and kinetic processes through charge injection, Maxwell stress, shifts of phase equilibria, and reduction of energy barriers for activated processes. Besides, the results provide a baseline for accounting for the effects of local electrostatic forces in electromechanical AFM measurements as well as offer additional means to probe ionic mobility and field-induced phenomena in solids. △ Less

Submitted 16 October, 2016; v1 submitted 12 October, 2016; originally announced October 2016.

Comments: Corrected misprints in units of Table 1

Enhancing interfacial magnetization with a ferroelectric

Authors: Tricia L. Meyer, 1 Andreas Herklotz, Valeria Lauter, John W. Freeland, John Nichols, Er-Jia Guo, Shinbuhm Lee, T. Zac Ward, Nina Balke, Sergei V. Kalinin, Michael R. Fitzsimmons, Ho Nyung Lee

Abstract: Ferroelectric control of interfacial magnetism has attracted much attention. However, the coupling of these two functionalities has not been understood well at the atomic scale. The lack of scientific progress is mainly due to the limited characterization methods by which the interface's magnetic properties can be probed at an atomic level. Here, we use polarized neutron reflectometry (PNR) to pro… ▽ More Ferroelectric control of interfacial magnetism has attracted much attention. However, the coupling of these two functionalities has not been understood well at the atomic scale. The lack of scientific progress is mainly due to the limited characterization methods by which the interface's magnetic properties can be probed at an atomic level. Here, we use polarized neutron reflectometry (PNR) to probe the evolution of the magnetic moment at interfaces in ferroelectric/strongly correlated oxide [PbZr0.2Ti0.8O3/La0.8Sr0.2MnO3 (PZT/LSMO)] heterostructures. We find that there is always suppressed magnetization at the surface and interface of LSMO and such magnetic deterioration can be strongly improved by interfacing with a strongly polar PZT film. The magnetoelectric coupling of magnetism and ferroelectric polarization occurs within a couple of nanometers of the interface as demonstrated by the enhanced interfacial magnetization beyond the bulk value by 5% depending on the polarization of PZT. The latter value is 70% higher than the surface magnetization of a LSMO film without interfacing with a ferroelectric layer. These compelling results not only probe the presence of nanoscale magnetic suppression and its control by ferroelectrics, but also emphasize the importance of utilizing probing techniques that can distinguish between bulk and interfacial phenomena. △ Less

Submitted 13 September, 2016; originally announced September 2016.

Journal ref: Phys. Rev. B 94, 174432 (2016)

Quantification of surface displacements and electromechanical phenomena via dynamic atomic force microscopy

Authors: Nina Balke, Stephen Jesse, Pu Yu, Ben Carmichael, Sergei V. Kalinin, Alexander Tselev

Abstract: Detection of dynamic surface displacements associated with local changes in material strain provides access to a number of phenomena and material properties. Contact resonance-enhanced methods of Atomic Force Microscopy (AFM) have been shown capable of detecting ~1-3 pm-level surface displacements, an approach used in techniques such as piezoresponse force microscopy, atomic force acoustic microsc… ▽ More Detection of dynamic surface displacements associated with local changes in material strain provides access to a number of phenomena and material properties. Contact resonance-enhanced methods of Atomic Force Microscopy (AFM) have been shown capable of detecting ~1-3 pm-level surface displacements, an approach used in techniques such as piezoresponse force microscopy, atomic force acoustic microscopy, and ultrasonic force microscopy. Here, based on an analytical model of AFM cantilever vibrations, we demonstrate a guideline to quantify surface displacements with a high accuracy by taking into account the cantilever shape at the first resonant contact mode depending on the tip-sample contact stiffness. The approach has been experimentally verified and further developed for the piezoresponse force microscopy (PFM) using well-defined ferroelectric materials. These results open up a way to accurate and precise measurements of the surface displacement as well as piezoelectric constants at the pm-scale with nanometer spatial resolution and will allow avoiding erroneous data interpretations and measurement artefacts. This analysis is directly applicable to all cantilever-resonance-based SPM techniques. △ Less

Submitted 23 March, 2016; originally announced March 2016.

Comments: 21 page, 6 figures + Supplementary data (2 tables, 4 figures)

Electrostrictive and electrostatic responses in contact mode voltage modulated Scanning Probe Microscopies

Authors: Eugene A. Eliseev, Anna N. Morozovska, Anton V. Ievlev, Nina Balke, Peter Maksymovych, Alexander Tselev, Sergei V. Kalinin

Abstract: Electromechanical response of solids underpins image formation mechanism of several scanning probe microscopy techniques including the piezoresponse force microscopy (PFM) and electrochemical strain microscopy (ESM). While the theory of linear piezoelectric and ionic responses are well developed, the contributions of quadratic effects including electrostriction and capacitive tip-surface forces to… ▽ More Electromechanical response of solids underpins image formation mechanism of several scanning probe microscopy techniques including the piezoresponse force microscopy (PFM) and electrochemical strain microscopy (ESM). While the theory of linear piezoelectric and ionic responses are well developed, the contributions of quadratic effects including electrostriction and capacitive tip-surface forces to measured signal remain poorly understood. Here we analyze the electrostrictive and capacitive contributions to the PFM and ESM signals and discuss the implications of the dielectric tip-surface gap on these interactions. △ Less

Submitted 5 March, 2014; originally announced March 2014.

Comments: 15 pages, 5 figures, 3 tables, Supplementary materials

Unit cell orientation of tetragonal-like BiFeO$_3$ thin films grown on highly miscut LaAlO$_3$ substrates

Authors: C. Beekman, W. Siemons, T. Z. Ward, J. D. Budai, J. Z. Tischler, R. Xu, W. Liu, N. Balke, J. H. Nam, H. M. Christen

Abstract: Synchrotron and lab-scale x-ray diffraction shows that tetragonal-like T'-BiFeO3 films on miscut LaAlO3 substrates (miscut < 5 deg) exhibit (00l)-planes tilted away from those of the substrate as predicted by the "Nagai model" (except for miscut <0.2 deg). Tilts as large as 1 deg are achieved even in 100 nm thick films, strikingly larger than those observed in other perovskites. We attribute this… ▽ More Synchrotron and lab-scale x-ray diffraction shows that tetragonal-like T'-BiFeO3 films on miscut LaAlO3 substrates (miscut < 5 deg) exhibit (00l)-planes tilted away from those of the substrate as predicted by the "Nagai model" (except for miscut <0.2 deg). Tilts as large as 1 deg are achieved even in 100 nm thick films, strikingly larger than those observed in other perovskites. We attribute this to the large c/a ratio and the high crystalline coherency of the T'-BiFeO3/LaAlO3 interface. This coherency is possible through an observed "diagonal-on-diagonal" alignment. Interestingly, the substrate miscut does not influence the relative population of monoclinic domains. △ Less

Submitted 13 December, 2013; originally announced December 2013.

Comments: 10 pages, 6 figures

Journal ref: Appl. Phys. Lett. 102, 221910 (2013)

Room-temperature multiferroic hexagonal LuFeO$_3$ films

Authors: Wenbin Wang, Jun Zhao, Wenbo Wang, Zheng Gai, Nina Balke, Miaofang Chi, Ho Nyung Lee, Wei Tian, Leyi Zhu, Xuemei Cheng, David J. Keavney, Jieyu Yi, Thomas Z. Ward, Paul C. Snijders, Hans M. Christen, Weida Wu, Jian Shen, Xiaoshan Xu

Abstract: The crystal and magnetic structures of single-crystalline hexagonal LuFeO$_3$ films have been studied using x-ray, electron and neutron diffraction methods. The polar structure of these films are found to persist up to 1050 K; and the switchability of the polar behavior is observed at room temperature, indicating ferroelectricity. An antiferromagnetic order was shown to occur below 440 K, followed… ▽ More The crystal and magnetic structures of single-crystalline hexagonal LuFeO$_3$ films have been studied using x-ray, electron and neutron diffraction methods. The polar structure of these films are found to persist up to 1050 K; and the switchability of the polar behavior is observed at room temperature, indicating ferroelectricity. An antiferromagnetic order was shown to occur below 440 K, followed by a spin reorientation resulting in a weak ferromagnetic order below 130 K. This observation of coexisting multiple ferroic orders demonstrates that hexagonal LuFeO$_3$ films are room-temperature multiferroics. △ Less

Submitted 29 May, 2013; v1 submitted 14 September, 2012; originally announced September 2012.

Journal ref: Phys. Rev. Lett. 110, 237601 (2013)

Watching Domains Grow: In-situ studies of polarization switching by combined Scanning Probe and Scanning Transmission Electron Microscopy

Authors: Hyejung Chang, Sergei V. Kalinin, Seungyeul Yang, Pu Yu, Saswata Bhattacharya, ** P. Wu, Nina Balke, Stephen Jesse, Long Q. Chen, Ramamoorthy Ramesh, Stephen J. Pennycook, Albina Y. Borisevich

Abstract: Ferroelectric domain nucleation and growth in multiferroic BiFeO3 films is observed directly by applying a local electric field with a conductive tip inside a scanning transmission electron microscope. The nucleation and growth of a ferroelastic domain and its interaction with pre-existing 71^{\circ} domain walls are observed and compared with the results of phase-field modeling. In particular, a… ▽ More Ferroelectric domain nucleation and growth in multiferroic BiFeO3 films is observed directly by applying a local electric field with a conductive tip inside a scanning transmission electron microscope. The nucleation and growth of a ferroelastic domain and its interaction with pre-existing 71^{\circ} domain walls are observed and compared with the results of phase-field modeling. In particular, a preferential nucleation site and direction-dependent pinning of domain walls is observed due to slow kinetics of metastable switching in the sample without a bottom electrode. These in-situ spatially-resolved observations of a first-order bias-induced phase transition reveal the mesoscopic mechanisms underpinning functionality of a wide range of multiferroic materials. △ Less

Submitted 26 April, 2011; originally announced April 2011.

Journal ref: J. Appl. Phys. 110, 052014 (2011)

Local probing of ionic diffusion by electrochemical strain microscopy: spatial resolution and signal formation mechanisms

Authors: A. N. Morozovska, E. A. Eliseev, N. Balke, S. V. Kalinin

Abstract: Electrochemical insertion-deintercalation reactions are typically associated with significant change of molar volume of the host compound. This strong coupling between ionic currents and strains underpins image formation mechanisms in electrochemical strain microscopy (ESM), and allows exploring the tip-induced electrochemical processes locally. Here we analyze the signal formation mechanism in ES… ▽ More Electrochemical insertion-deintercalation reactions are typically associated with significant change of molar volume of the host compound. This strong coupling between ionic currents and strains underpins image formation mechanisms in electrochemical strain microscopy (ESM), and allows exploring the tip-induced electrochemical processes locally. Here we analyze the signal formation mechanism in ESM, and develop the analytical description of operation in frequency and time domains. The ESM spectroscopic modes are compared to classical electrochemical methods including potentiostatic and galvanostatic intermittent titration (PITT and GITT), and electrochemical impedance spectroscopy (EIS). This analysis illustrates the feasibility of spatially resolved studies of Li-ion dynamics on the sub-10 nanometer level using electromechanical detection. △ Less

Submitted 4 April, 2010; originally announced April 2010.

Comments: 49 pages, 17 figures, 4 tables, 3 appendices, to be submitted to J. Appl. Phys.