Showing 1–50 of 51 results for author: Baldini, M

First results of AUP Nb3Sn quadrupole horizontal tests

Authors: M. Baldini, G. Ambrosio, G. Apollinari, J. Blowers, R. Bossert, R. Carcagno, G. Chlachidze, J. DiMarco, S. Feher, S. Krave, V. Lombardo, L. Martin, C. Narug, T. H. Nicol, V. Nikolic, A. Nobrega, V. Marinozzi, C. Orozco, T. Page, S. Stoynev, T. Strauss, M. Turenne, D. Turrioni, A. Vouris, M. Yu , et al. (26 additional authors not shown)

Abstract: The Large Hadron Collider will soon undergo an upgrade to increase its luminosity by a factor of ~10 [1]. A crucial part of this upgrade will be replacement of the NbTi focusing magnets with Nb3Sn magnets that achieve a ~50% increase in the field strength. This will be the first ever large-scale implementation of Nb3Sn magnets in a particle accelerator. The High-Luminosity LHC Upgrade, HL-LHC is a… ▽ More The Large Hadron Collider will soon undergo an upgrade to increase its luminosity by a factor of ~10 [1]. A crucial part of this upgrade will be replacement of the NbTi focusing magnets with Nb3Sn magnets that achieve a ~50% increase in the field strength. This will be the first ever large-scale implementation of Nb3Sn magnets in a particle accelerator. The High-Luminosity LHC Upgrade, HL-LHC is a CERN project with a world-wide collaboration. It is under construction and utilizes Nb3Sn Magnets (named MQXF) as key ingredients to increase tenfold the integrated luminosity delivered to the CMS and ATLAS experiments in the next decade. The HL-LHC AUP is the US effort to contribute approximately 50% of the low-beta focusing magnets and crab cavities for the HL-LHC. This paper will present the program to fabricate the Nb3Sn superconducting magnets. We are reporting the status of the HL-LHC AUP project present the results from horizontal tests of the first fully assembled cryo-assembly. △ Less

Submitted 28 May, 2024; originally announced May 2024.

Comments: IPAC'24 - 15th International Particle Accelerator Conference

Report number: FERMILAB-CONF-24-0273-TD

Journal ref: JACoW IPAC2024 (2024) THYN1

Quench Performance of the First Pre-series AUP Cryo-assembly

Authors: M. Baldini, G. Chlachidze, G. Apollinari, J. Dimarco, S. Feher, V. Nikolic, D. Orris, R. Rabehl, S. Stoynev, T. Strauss, M. Tartaglia, A. Vouris

Abstract: The High Luminosity upgrade of the Large Hadron Collider (HL-LHC) at CERN will include eight cryo-assemblies that are expected to be fabricated and delivered to CERN by the US HL-LHC Accelerator Upgrade Project (AUP) as part of the U.S. contributions to the HL-LHC. These cryostat assemblies are the quadrupole magnetic components of the HL-LHC Q1 and Q3 inner triplet optical elements in front of th… ▽ More The High Luminosity upgrade of the Large Hadron Collider (HL-LHC) at CERN will include eight cryo-assemblies that are expected to be fabricated and delivered to CERN by the US HL-LHC Accelerator Upgrade Project (AUP) as part of the U.S. contributions to the HL-LHC. These cryostat assemblies are the quadrupole magnetic components of the HL-LHC Q1 and Q3 inner triplet optical elements in front of the two interaction points. Each cryo-assembly consists of two 4.2 m long Nb3Sn quadrupole magnets with aperture 150 mm and operating gradient 132.6 T/m. The first pre-series cryo-assembly has been fabricated and successfully tested at the horizontal test facility at Fermi National Accelerator Laboratory. In this manuscript we report the quench test results of the LQXFA/B-01 cryo-assembly. The primary objective of the horizontal test is full cryo-assembly qualification and validation of the performance requirements. △ Less

Submitted 29 February, 2024; originally announced March 2024.

Comments: MT28 International Conference on Magnet Technology, Accepted Version

Report number: FERMILAB-CONF-24-0052-TD

Development and Test of a Large-aperture Nb3Sn Cos-theta Dipole Coil with Stress Management

Authors: I. Novitski, A. V. Zlobin, M. Baldini, S. Krave, D. Orris, D. Turrioni, E. Barzi

Abstract: The design concept of the Electron Ion Collider (EIC), which is under construction at BNL, considers adding a 2nd Interaction Region (IR) and detector to the machine after completion of the present EIC project. Recent progress with development and fabrication of large-aperture high-field magnets based on the Nb3Sn technology for the HL-LHC makes this technology interesting for the 2nd EIC IR. This… ▽ More The design concept of the Electron Ion Collider (EIC), which is under construction at BNL, considers adding a 2nd Interaction Region (IR) and detector to the machine after completion of the present EIC project. Recent progress with development and fabrication of large-aperture high-field magnets based on the Nb3Sn technology for the HL-LHC makes this technology interesting for the 2nd EIC IR. This paper summarizes the results of feasibility studies of large-aperture high-field Nb3Sn dipoles and quadrupoles for the 2nd EIC IR. △ Less

Submitted 24 January, 2024; originally announced January 2024.

Comments: IPAC 2023. arXiv admin note: text overlap with arXiv:2304.13155

Report number: FERMILAB-CONF-23-386-TD

Magnetic Measurements and Alignment Results of LQXFA/B Cold Mass Assemblies at Fermilab

Authors: J. DiMarco, P. Akella, G. Ambrosio, M. Baldini, G. Chlachidze, S. Feher, J. Nogiec, V. Nikolic, S. Stoynev, T. Strauss, M. Tartaglia, P. Thompson, D. Walbridge

Abstract: MQXFA production series quadrupole magnets are being built for the Hi-Lumi (HL) LHC upgrade by the US Accelerator Upgrade Project (US-HL-LHC AUP). These magnets are being placed in pairs, as a cold mass, within cryostats at Fermilab, and are being tested to assess alignment and magnetic performance at Fermilab's horizontal test stand facility. The ~10 m - long assembly must meet stringent specific… ▽ More MQXFA production series quadrupole magnets are being built for the Hi-Lumi (HL) LHC upgrade by the US Accelerator Upgrade Project (US-HL-LHC AUP). These magnets are being placed in pairs, as a cold mass, within cryostats at Fermilab, and are being tested to assess alignment and magnetic performance at Fermilab's horizontal test stand facility. The ~10 m - long assembly must meet stringent specifications for quadrupole strength and harmonic field integrals determination, magnetic axis position, and for magnet variations in positioning and local field profile. This paper describes the results of the magnetic and alignment measurements which characterize the first LQXFA/B assembly. △ Less

Submitted 13 December, 2023; originally announced December 2023.

Comments: 28th International Conference on Magnet Technology (MT-28)

Report number: FERMILAB-CONF-23-791-TD

Performances of a new generation tracking detector: the MEG II cylindrical drfit chamber

Authors: A. M. Baldini, H. Benmansour, G. Boca, G. Cavoto, F. Cei, M. Chiappini, G. Chiarello, A. Corvaglia, F. Cuna, M. Francesconi, L. Galli, F. Grancagnolo, E. G. Grandoni, M. Grassi, M. Hildebrandt, F. Ignatov, M. Meucci, W. Molzon, D. Nicolo', A. Oya, D. Palo, M. Panareo, A. Papa, F. Raffaelli, F. Renga , et al. (6 additional authors not shown)

Abstract: The cylindrical drift chamber is the most innovative part of the MEG~II detector, the upgraded version of the MEG experiment. The MEG~II chamber differs from the MEG one because it is a single volume cylindrical structure, instead of a segmented one, chosen to improve its resolutions and efficiency in detecting low energy positrons from muon decays at rest. In this paper, we show the characteristi… ▽ More The cylindrical drift chamber is the most innovative part of the MEG~II detector, the upgraded version of the MEG experiment. The MEG~II chamber differs from the MEG one because it is a single volume cylindrical structure, instead of a segmented one, chosen to improve its resolutions and efficiency in detecting low energy positrons from muon decays at rest. In this paper, we show the characteristics and performances of this fundamental part of the MEG~II apparatus and we discuss the impact of its higher resolution and efficiency on the sensitivity of the MEG~II experiment. Because of its innovative structure and high quality resolution and efficiency the MEG~II cylindrical drift chamber will be a cornerstone in the development of an ideal tracking detector for future positron-electron collider machines. △ Less

Submitted 20 May, 2024; v1 submitted 19 October, 2023; originally announced October 2023.

Comments: 27 pages, 42 figures, published on EPJC 84(2024)5,473

A search for $μ^+\to e^+γ$ with the first dataset of the MEG II experiment

Authors: MEG II collaboration, K. Afanaciev, A. M. Baldini, S. Ban, V. Baranov, H. Benmansour, M. Biasotti, G. Boca, P. W. Cattaneo, G. Cavoto, F. Cei, M. Chiappini, G. Chiarello, A. Corvaglia, F. Cuna, G. Dal Maso, A. De Bari, M. De Gerone, L. Ferrari Barusso, M. Francesconi, L. Galli, G. Gallucci, F. Gatti, L. Gerritzen, F. Grancagnolo , et al. (57 additional authors not shown)

Abstract: The MEG II experiment, based at the Paul Scherrer Institut in Switzerland, reports the result of a search for the decay $μ^+\to e^+γ$ from data taken in the first physics run in 2021. No excess of events over the expected background is observed, yielding an upper limit on the branching ratio of B($μ^+\to e^+γ$) < $7.5 \times 10^{-13}$ (90% C.L.). The combination of this result and the limit obtain… ▽ More The MEG II experiment, based at the Paul Scherrer Institut in Switzerland, reports the result of a search for the decay $μ^+\to e^+γ$ from data taken in the first physics run in 2021. No excess of events over the expected background is observed, yielding an upper limit on the branching ratio of B($μ^+\to e^+γ$) < $7.5 \times 10^{-13}$ (90% C.L.). The combination of this result and the limit obtained by MEG gives B($μ^+\to e^+γ$) < $3.1 \times 10^{-13}$ (90% C.L.), which is the most stringent limit to date. A ten-fold larger sample of data is being collected during the years 2022-2023, and data-taking will continue in the coming years. △ Less

Submitted 7 January, 2024; v1 submitted 19 October, 2023; originally announced October 2023.

Comments: 10 pages, 6 figures. To be published in EPJC

Operation and performance of MEG II detector

Authors: MEG II Collaboration, K. Afanaciev, A. M. Baldini, S. Ban, V. Baranov, H. Benmansour, M. Biasotti, G. Boca, P. W. Cattaneo, G. Cavoto, F. Cei, M. Chiappini, G. Chiarello, A. Corvaglia, F. Cuna, G. Dal Maso, A. De Bari, M. De Gerone, L. Ferrari Barusso, M. Francesconi, L. Galli, G. Gallucci, F. Gatti, L. Gerritzen, F. Grancagnolo , et al. (60 additional authors not shown)

Abstract: The MEG II experiment, located at the Paul Scherrer Institut (PSI) in Switzerland, is the successor to the MEG experiment, which completed data taking in 2013. MEG II started fully operational data taking in 2021, with the goal of improving the sensitivity of the mu+ -> e+ gamma decay down to 6e-14 almost an order of magnitude better than the current limit. In this paper, we describe the operation… ▽ More The MEG II experiment, located at the Paul Scherrer Institut (PSI) in Switzerland, is the successor to the MEG experiment, which completed data taking in 2013. MEG II started fully operational data taking in 2021, with the goal of improving the sensitivity of the mu+ -> e+ gamma decay down to 6e-14 almost an order of magnitude better than the current limit. In this paper, we describe the operation and performance of the experiment and give a new estimate of its sensitivity versus data acquisition time. △ Less

Submitted 8 January, 2024; v1 submitted 18 October, 2023; originally announced October 2023.

Comments: 42 pages, 55 figures. Submitted to EPJC

Application of Distributed Fiber Optic Strain Sensors to LMQXFA Cold Mass Welding

Authors: M. Baldini, S. Krave, R. Bossert, S. Feher, T. Strauss, A. Vouris

Abstract: The future High Luminosity upgrade of the Large Hadron Collider (HL-LHC) at CERN will include the low-beta inner triplets (Q1, Q2a/b, Q3) for two LHC insertion regions. The Q1, Q3 components consist of eight 10 m-long LMQXFA cryo-assemblies fabricated by the HL-LHC Accelerator Upgrade Project. Each LMQXFA Cold mass contains two Nb3Sn magnets connected in series. A stainless-steel shell is welded a… ▽ More The future High Luminosity upgrade of the Large Hadron Collider (HL-LHC) at CERN will include the low-beta inner triplets (Q1, Q2a/b, Q3) for two LHC insertion regions. The Q1, Q3 components consist of eight 10 m-long LMQXFA cryo-assemblies fabricated by the HL-LHC Accelerator Upgrade Project. Each LMQXFA Cold mass contains two Nb3Sn magnets connected in series. A stainless-steel shell is welded around the two magnets before the insertion into the cryostat. There is a limit on how much coil preload increase induced by the shell welding is allowed. Distributed Rayleigh backscattering fiber optics sensors were used for the first time to obtain a strain map over a wide area of a Nb3Sn magnet cold mass shell. Data were collected during welding of the first LMQXFA cold mass and the results confirm that the increase of the coil pole azimuthal pre-stress after welding do not exceed requirements. △ Less

Submitted 29 March, 2023; originally announced March 2023.

Report number: FERMILAB-PUB-23-117-TD

MQXFA11 ship** incident report

Authors: M. Baldini, G. Ambrosio, J. Blower, J. Cozzolino, T. Strauss, G. Vallone

Abstract: The truck transporting the MQXFA11 magnet from LBNL to BNL was involved in an accident on 7/20/22. It was rear ended by another truck. The magnet arrived at FNAL on July 28th. Upon arrival a visual inspection was performed. Accelerometers were removed and shock data were analyzed. Electrical checkout and a metrology survey were carried out. Strain data were also collected from the fiber optics ins… ▽ More The truck transporting the MQXFA11 magnet from LBNL to BNL was involved in an accident on 7/20/22. It was rear ended by another truck. The magnet arrived at FNAL on July 28th. Upon arrival a visual inspection was performed. Accelerometers were removed and shock data were analyzed. Electrical checkout and a metrology survey were carried out. Strain data were also collected from the fiber optics installed on two coils and compared with data obtained before shipment. This report presents a summary of results △ Less

Submitted 24 January, 2023; originally announced February 2023.

Commissioning, Performance, and Effect of the Quench Current-boosting Device on a Dedicated Superconducting Magnet

Authors: S. Stoynev, M. Baldini, S. Feher

Abstract: Superconducting magnet training is one of the accelerator related issues attracting attention due to significant operational costs and time budget associated to it. It is especially worrisome that magnets based on the next-generation Nb3Sn technology are affected by long training. While various efforts are underway to better understand and resolve the problem a parallel path could also be investig… ▽ More Superconducting magnet training is one of the accelerator related issues attracting attention due to significant operational costs and time budget associated to it. It is especially worrisome that magnets based on the next-generation Nb3Sn technology are affected by long training. While various efforts are underway to better understand and resolve the problem a parallel path could also be investigated, a path bypassing the issue. Following the concept of fast induced over-current during magnet powering, FNAL has developed an upgradable capacitor-based device to discharge through a superconducting magnet at quench detection or operator chosen time. The 0.4 F/1 kV device has been tested on a 1-m-long dipole-coil in a mirror magnet configuration and conclusive results on magnet training elimination have been observed. In this paper we discuss the main characteristics of the device, compare simulated response and actual performance, elaborate on test drivers and outcomes. Next steps and perspectives for future use are debated. △ Less

Submitted 24 January, 2023; originally announced January 2023.

Report number: FERMILAB-PUB-22-764-TD

Challenges and Lessons Learned from fabrication, testing and analysis of eight MQXFA Low Beta Quadrupole magnets for HL-LHC

Authors: G. Ambrosio, K. Amm, M. Anerella, G. Apollinari, G. Arnau Izquierdo, M. Baldini, A. Ballarino, C. Barth, A. Ben Yahia, J. Blowers, P. Borges De Sousa, R. Bossert, B. Bulat, R. Carcagno, D. W. Cheng, G. Chlachidze, L. Cooley, M. Crouvizier, A. Devred, J. DiMarco, S. Feher, P. Ferracin, J. Ferradas Troitino, L. Garcia Fajardo, S. Gourlay , et al. (33 additional authors not shown)

Abstract: By the end of October 2022, the US HL-LHC Accelerator Upgrade Project (AUP) had completed fabrication of ten MQXFA magnets and tested eight of them. The MQXFA magnets are the low beta quadrupole magnets to be used in the Q1 and Q3 Inner Triplet elements of the High Luminosity LHC. This AUP effort is shared by BNL, Fermilab, and LBNL, with strand verification tests at NHMFL. An important step of th… ▽ More By the end of October 2022, the US HL-LHC Accelerator Upgrade Project (AUP) had completed fabrication of ten MQXFA magnets and tested eight of them. The MQXFA magnets are the low beta quadrupole magnets to be used in the Q1 and Q3 Inner Triplet elements of the High Luminosity LHC. This AUP effort is shared by BNL, Fermilab, and LBNL, with strand verification tests at NHMFL. An important step of the AUP QA plan is the testing of MQXFA magnets in a vertical cryostat at BNL. The acceptance criteria that could be tested at BNL were all met by the first four production magnets (MQXFA03-MQXFA06). Subsequently, two magnets (MQXFA07 and MQXFA08) did not meet some criteria and were disassembled. Lessons learned during the disassembly of MQXFA07 caused a revision to the assembly specifications that were used for MQXFA10 and subsequent magnets. In this paper, we present a summary of: 1) the fabrication and test data of all the MQXFA magnets; 2) the analysis of MQXFA07/A08 test results with characterization of the limiting mechanism; 3) the outcome of the investigation, including the lessons learned during MQXFA07 disassembly; and 4) the finite element analysis correlating observations with test performance. △ Less

Submitted 23 January, 2023; originally announced January 2023.

Report number: FERMILAB-PUB-22-855-TD

A Metallurgical Inspection Method to Assess the Damage in Performance-Limiting Nb3Sn Accelerator Magnet Coils

Authors: Alice Moros, Mickael Denis Crouvizier, Ignacio Aviles Santillana, Stefano Sgobba, Susana Izquierdo Bermudez, Nicholas Lusa, Jose Ferradas Troitino, Attilio Milanese, Ezio Todesco, Arnaud Devred, Giorgio Ambrosio, Maria Baldini, Paolo Ferracin, Jesse Schmalzle, Giorgio Vallone

Abstract: The design and production of Nb3Sn-based dipole and quadrupole magnets is critical for the realization of the High-Luminosity Large Hadron Collider (HL-LHC) at the European Organization for Nuclear Research (CERN). Nb3Sn superconducting coils are aimed at enhancing the bending and focusing strengths of accelerator magnets for HL-LHC and beyond. Due to the brittle nature of Nb3Sn, the coil fabricat… ▽ More The design and production of Nb3Sn-based dipole and quadrupole magnets is critical for the realization of the High-Luminosity Large Hadron Collider (HL-LHC) at the European Organization for Nuclear Research (CERN). Nb3Sn superconducting coils are aimed at enhancing the bending and focusing strengths of accelerator magnets for HL-LHC and beyond. Due to the brittle nature of Nb3Sn, the coil fabrication steps are very challenging and require very careful QA/QC. Flaws in the Nb3Sn filaments may lead to quenches, and eventually, performance limitation below nominal during magnet testing. A novel inspection method, including advanced non-destructive and destructive techniques, was developed to explore the root-causes of quenches occurring in performance-limiting coils. The most relevant results obtained for MQXF coils through this innovative inspection method are presented. This approach allows for precise assessment of the physical events associated to the quenches experienced b y magnet coils, mainly occurring under the form of damaged strands with transversely broken sub-elements. Coil-slice preparation, micro-optical observations of transverse and longitudinal cross-sections, and a deep etching technique of copper will be illustrated in the present work, with a focus on the results achieved for a CERN coil from a non-conforming quadrupole magnet prototype, and two coils fabricated in the US, in the framework of the Accelerator Upgrade Project (AUP) collaboration, from two different non-conforming quadrupole magnets, respectively. The results obtained through the proposed inspection method will be illustrated. △ Less

Submitted 17 November, 2022; originally announced November 2022.

Comments: Applied Superconductivity Conference 2022

Report number: FERMILAB-PUB-22-859-TD

Improved muon decay simulation with McMule and Geant4

Authors: A. Gurgone, A. Papa, P. Schwendimann, A. Signer, Y. Ulrich, A. M. Baldini, F. Cei, M. Chiappini, M. Francesconi, L. Galli, M. Grassi, D. Nicolò, G. Signorelli

Abstract: The physics programme of the MEG II experiment can be extended with the search for new invisible particles produced in rare muon decays. The hunt for such elusive signals requires accurate simulations to characterise the detector response and estimate the experimental sensitivity. This work presents an improved simulation of muon decay in MEG II, based on McMule and Geant4. The physics programme of the MEG II experiment can be extended with the search for new invisible particles produced in rare muon decays. The hunt for such elusive signals requires accurate simulations to characterise the detector response and estimate the experimental sensitivity. This work presents an improved simulation of muon decay in MEG II, based on McMule and Geant4. △ Less

Submitted 1 December, 2022; v1 submitted 3 November, 2022; originally announced November 2022.

Comments: 4 pages, 5 figures, contribution to PM2021, version accepted for publication

Journal ref: Nuclear Inst. and Methods in Physics Research, A 1047 (2023) 167837

The measuring systems of the wire tension for the MEG II Drift Chamber by means of the resonant frequency technique

Authors: A. M. Baldini, H. Benmansour, G. Cavoto, F. Cei, M. Chiappini, G. Chiarello, C. Chiri, G. Cocciolo, A. Corvaglia, F. Cuna, M. Francesconi, L. Galli, F. Grancagnolo, M. Grassi, M. Meucci, A. Miccoli, D. Nicolo', M. Panareo, A. Papa, C. Pinto, F. Raffaelli, F. Renga, G. Signorelli, G. F. Tassielli, A. Venturini , et al. (2 additional authors not shown)

Abstract: The ultra-low mass cylindrical drift chamber designed for the MEG II experiment is a challenging apparatus made of 1728 phi = 20 micron gold plated tungsten sense wires, 7680 phi = 40 micron and 2496 phi = 50 micron silver plated aluminum field wires. Because of electrostatic stability requirements all the wires have to be stretched at mechanical tensions of about 25, 19 and 29 g respectively whic… ▽ More The ultra-low mass cylindrical drift chamber designed for the MEG II experiment is a challenging apparatus made of 1728 phi = 20 micron gold plated tungsten sense wires, 7680 phi = 40 micron and 2496 phi = 50 micron silver plated aluminum field wires. Because of electrostatic stability requirements all the wires have to be stretched at mechanical tensions of about 25, 19 and 29 g respectively which must be controlled at a level better than 0.5 g. This chamber is presently in acquisition, but during its construction about 100 field wires broke, because of chemical corrosion induced by the atmospheric humidity. On the basis of the experience gained with this chamber we decided to build a new one, equipped with a different type of wires less sensitive to corrosion. The choice of the new wire required a deep inspection of its characteristics and one of the main tools for doing this is a system for measuring the wire tension by means of the resonant frequency technique, which is described in this paper. The system forces the wires to oscillate by applying a sinusoidal signal at a known frequency, and then measures the variation of the capacitance between a wire and a common ground plane as a function of the external signal frequency. We present the details of the measuring system and the results obtained by scanning the mechanical tensions of two samples of MEG II cylindrical drift chamber wires and discuss the possible improvements of the experimental apparatus and of the measuring technique. △ Less

Submitted 26 October, 2022; v1 submitted 22 July, 2022; originally announced July 2022.

Comments: Nineteen pages, thirteen figures, published on Nuclear Instruments and Methods A

Journal ref: Nucl.Instrum.Meth.A 1045 (2023) 167534

A Strategic Approach to Advance Magnet Technology for Next Generation Colliders

Authors: G. Ambrosio, K. Amm, M. Anerella, G. Apollinari, D. Arbelaez, B. Auchmann, S. Balachandran, M. Baldini, A. Ballarino, S. Barua, E. Barzi, A. Baskys, C. Bird, J. Boerme, E. Bosque, L. Brouwer, S. Caspi, N. Cheggour, G. Chlachidze, L. Cooley, D. Davis, D. Dietderich, J. DiMarco, L. English, L. Garcia Fajardo , et al. (52 additional authors not shown)

Abstract: Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the extraordinary luminosity required to probe physics at the energy frontier. The dipole magnet strength plays a critical role in dictating the energy reach of a collider, and the superconducting magnets are arguably the domi… ▽ More Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the extraordinary luminosity required to probe physics at the energy frontier. The dipole magnet strength plays a critical role in dictating the energy reach of a collider, and the superconducting magnets are arguably the dominant cost driver for future collider facilities. As the community considers opportunities to explore new energy frontiers, the importance of advanced magnet technology - both in terms of magnet performance and in the magnet technology's potential for cost reduction - is evident, as the technology status is essential for informed decisions on targets for physics reach and facility feasibility. △ Less

Submitted 26 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Advancing Superconducting Magnet Diagnostics for Future Colliders

Authors: M. Marchevsky, R. Teyber, G. S. Lee, M. Turqueti, M. Baldini, E. Barzi, J. DiMarco, S. Krave, V. Marinozzi, S. Stoynev, P. Joshi, J. Muratore, D. Davis

Abstract: Future colliders will operate at increasingly high magnetic fields pushing limits of electromagnetic and mechanical stress on the conductor [1]. Understanding factors affecting superconducting (SC) magnet performance in challenging conditions of high mechanical stress and cryogenic temperatures is only possible with the use of advanced magnet diagnostics. Diagnostics provide a unique observation w… ▽ More Future colliders will operate at increasingly high magnetic fields pushing limits of electromagnetic and mechanical stress on the conductor [1]. Understanding factors affecting superconducting (SC) magnet performance in challenging conditions of high mechanical stress and cryogenic temperatures is only possible with the use of advanced magnet diagnostics. Diagnostics provide a unique observation window into mechanical and electromagnetic processes associated with magnet operation, and give essential feedback to magnet design, simulations and material research activities. Development of novel diagnostic capabilities is therefore an integral part of next-generation magnet development. In this paper, we summarize diagnostics development needs from a prospective of the US Magnet Development Program (MDP), and define main research directions that could shape this field in the near future. △ Less

Submitted 16 March, 2022; originally announced March 2022.

Comments: 13 pages, 7 figures Contribution to Snowmass 2021

Fiber-optic diagnostic system for future accelerator magnets

Authors: Maria Baldini, Giorgio Ambrosio, Paolo Ferracin, Piyush Joshi, S. Krave, Linqing Luo, Maxim Marchevsky, G. Vallone, Xiaorong Wang

Abstract: The next generation high energy physics accelerators will require magnetic fields at ~20 T. HTS coils will be an essential component of future accelerator magnets and several efforts are currently dedicated on designing 20 T HTS- LTS hybrid magnets. Among the existing challenges, there is the lack of a robust quench detection system for hybrid magnet technology. Another big challenge is represente… ▽ More The next generation high energy physics accelerators will require magnetic fields at ~20 T. HTS coils will be an essential component of future accelerator magnets and several efforts are currently dedicated on designing 20 T HTS- LTS hybrid magnets. Among the existing challenges, there is the lack of a robust quench detection system for hybrid magnet technology. Another big challenge is represented by the high number of training quenches required by Nb3Sn magnets to reach performance level. In this framework it is important to find a tool that allow local real-time monitoring of magnet strain and temperature. In this paper, we propose the use of fiber optics sensors for diagnostic and quench detection in future accelerator superconducting magnets. Discrete and distributed fiber optic sensors have demonstrated to be a promising tool. The goal is to instrument hundreds of accelerator superconducting magnets and to move beyond the proof-of-concept level. Significant developments are still needed. Here, we are going to present the most recent results and discuss the most urgent technical developments in order to make those sensors a robust and reliable diagnostic tool for accelerator superconducting magnets over the next 10 year. We foresee that discrete fiber sensors will be a stable diagnostic probe for superconducting magnets over the next 3 to 5 years. More R&D work will be necessary for distributed fibers. The most urgent needs are the increase of sample rate and sensitivity. Close collaboration with vendors will be necessary to improve mechanical properties and fabrication processes in order to produce hundreds of meters of fiber and instrument a large number of accelerator superconducting magnets. Those R&D efforts will last up to 10 years with a founding level that spans between 5-10 M$. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

White Paper on Leading-Edge technology And Feasibility-directed (LEAF) Program aimed at readiness demonstration for Energy Frontier Circular Colliders by the next decade

Authors: G. Ambrosio, G. Apollinari, M. Baldini, R. Carcagno, C. Boffo, B. Claypool, S. Feher, S. Hays, D. Hoang, V. Kashikhin, V. V. Kashikhin, S. Krave, M. Kufer, J. Lee, V. Lombardo, V. Marinozzi, F. Nobrega, X. Peng, H. Piekarz, V. Shiltsev, S. Stoynev, T. Strauss, N. Tran, G. Velev, X. Xu , et al. (17 additional authors not shown)

Abstract: In this White Paper for the Snowmass 2021 Process, we propose the establishment of a magnet Leading-Edge technology And Feasibility-directed Program (LEAF Program) to achieve readiness for a future collider decision on the timescale of the next decade. The LEAF Program would rely on, and be synergetic with, generic R&D efforts presently covered - in the US - by the Magnet Development Program (MD… ▽ More In this White Paper for the Snowmass 2021 Process, we propose the establishment of a magnet Leading-Edge technology And Feasibility-directed Program (LEAF Program) to achieve readiness for a future collider decision on the timescale of the next decade. The LEAF Program would rely on, and be synergetic with, generic R&D efforts presently covered - in the US - by the Magnet Development Program (MDP), the Conductor Procurement and R&D (CPRD) Program and other activities in the Office of HEP supported by Early Career Awards (ECA) or Lab Directed R&D (LDRD) funds. Where possible, ties to synergetic efforts in other Offices of DOE or NSF are highlighted and suggested as wider Collaborative efforts on the National scale. International efforts are also mentioned as potential partners in the LEAF Program. We envision the LEAF Program to concentrate on demonstrating the feasibility of magnets for muon colliders as well as next generation high energy hadron colliders, pursuing, where necessary and warranted by the nature of the application, the transition from R&D models to long models/prototypes. The LEAF Program will naturally drive accelerator-quality and experiment-interface design considerations. LEAF will also concentrate, where necessary, on cost reduction and/or industrialization steps. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021, 19 pages, 5 figures. Corresponding Author: G. Apollinari [email protected]

MQXFA Final Design Report

Authors: Giorgio Ambrosio, Kathleen Amm, Mike Anerella, Giorgio Apollinari, Maria Baldini, Anis Ben Yahia, James Blowers, Ruben Carcagno, Daniel Cheng, Guram Chlachidze, Lance Cooley, Sandor Feher, Paolo Ferracin, Henry Hocker, Susana Izquierdo Bermudez, Piyush Joshi, Vito Lombardo, Vittorio Marinozzi, Joseph Muratore, Michael Naus, Fred Nobrega, Heng Pan, Marcellus Parker, Ian Pong, Soren Prestemon , et al. (7 additional authors not shown)

Abstract: The MQXFA Quadrupole magnets will be installed in High Luminosity LHC to form the Q1 and Q3 inner triplet optical elements in front of the interaction points 1 (ATLAS) and 5 (CMS). A pair of MQXFA units is assembled in a stainless steel helium vessel, including the end domes, to make the Q1 Cold Mass or the Q3 Cold Mass. The US HL LHC Accelerator Upgrade Project* is responsible for the design, man… ▽ More The MQXFA Quadrupole magnets will be installed in High Luminosity LHC to form the Q1 and Q3 inner triplet optical elements in front of the interaction points 1 (ATLAS) and 5 (CMS). A pair of MQXFA units is assembled in a stainless steel helium vessel, including the end domes, to make the Q1 Cold Mass or the Q3 Cold Mass. The US HL LHC Accelerator Upgrade Project* is responsible for the design, manufacturing and test of the Q1/Q3 Cold Masses and the complete MQXFA magnets. CERN provides the cryostat components and is responsible for integration and installation in HL LHC. The MQXFA quadrupoles have 150 mm aperture, 4.2 m magnetic length, nominal gradient of 132.2 T/m, and coil peak field of 11.3 T. They use Nb_3Sn conductor and a support structure made of segmented aluminum shells pre-loaded by using bladders and keys. This report presents the final design of the MQXFA quadrupole magnets. *Supported by the U.S. Department of Energy, Office of Science, Office of High Energy Physics △ Less

Submitted 13 March, 2022; originally announced March 2022.

Comments: 120 pages

Report number: FERMILAB-TM-2773-TD; US-HiLumi-doc-948

MDPCT1 quench data and performance analysis

Authors: Stoyan Emilov Stoynev, Maria Baldini, Emanuela Z. Barzi, Gouram Chlachidze, Vadim V. Kashikhin, Steven T. Krave, Igor Novitski, Daniele Turrioni, Alexander V. Zlobin

Abstract: MDPCT1 is a four-layer cos-theta Nb3Sn dipole demonstrator developed and tested at FNAL in the framework of the U.S. Magnet Development Program. The magnet reached record fields for accelerator magnets of 14.1 T at 4.5 K in the first test and 14.5 T at 1.9 K in the second test and then showed large degradation. While its inner coils performed exceptionally well with only two quenches up to 14.5 T… ▽ More MDPCT1 is a four-layer cos-theta Nb3Sn dipole demonstrator developed and tested at FNAL in the framework of the U.S. Magnet Development Program. The magnet reached record fields for accelerator magnets of 14.1 T at 4.5 K in the first test and 14.5 T at 1.9 K in the second test and then showed large degradation. While its inner coils performed exceptionally well with only two quenches up to 14.5 T and no evidence of degradation, the outer coils degraded over the course of testing. By adopting new measurement and analysis techniques at FNAL we are discussing in detail what happened. Both success and failure in our diagnostics are discussed. The evolution of techniques over the course of two tests (and three thermal cycles) shows the path to address challenges brought by the first four-layer magnet tested at FNAL. This paper presents the analysis of quench data along with diagnostic features and complementary measurements taken in support of the magnet performance analysis. △ Less

Submitted 11 February, 2022; originally announced February 2022.

Report number: FERMILAB-CONF-21-638-TD

Magnetic Measurements of HL-LHC AUP Cryo-Assemblies at Fermilab

Authors: J. DiMarco, P. Akella, G. Ambrosio, D. Assell, M. Baldini, G. Chlachidze, S. Feher, J. Nogiec, V. Nikolic, S. Stoynev, T. Strauss, M. Tartaglia, P. Thompson, D. Walbridge, W. Ghiorso, X. Wang

Abstract: LQXFA/B production series cryogenic assemblies are being built for the LHC upgrade by the HL-LHC Accelerator Upgrade Project (AUP). These contain a pair of MQXFA quadrupole magnets combined as a cold mass within a vacuum vessel, and are to be installed in the IR regions of the LHC. The LQXFA/B are being tested at 1.9 K to assess alignment and magnetic performance at Fermilab's horizontal test faci… ▽ More LQXFA/B production series cryogenic assemblies are being built for the LHC upgrade by the HL-LHC Accelerator Upgrade Project (AUP). These contain a pair of MQXFA quadrupole magnets combined as a cold mass within a vacuum vessel, and are to be installed in the IR regions of the LHC. The LQXFA/B are being tested at 1.9 K to assess alignment and magnetic performance at Fermilab's horizontal test facility. The ~10 m - long assembly must meet stringent specifications for quadrupole strength and harmonic field integrals determination, magnetic axis location, and for variations in axis position and local field profile. A multi-probe, PCB-based rotating coil and Single Stretched Wire system are employed for these measurements. To accurately determine rotating coil location and angles within the cold mass, a laser tracker is utilized to record multiple targets at one end of the probe. This paper describes the measurements, probes/equipment, and techniques used to perform the necessary characterization of the cold mass. △ Less

Submitted 14 December, 2021; originally announced December 2021.

Comments: 27th Intl Conf on Magnet Technology (MT27)

Report number: FERMILAB-CONF-21-688-TD

Detailed analysis of chemical corrosion of ultra-thin wires used in drift chamber detectors

Authors: A. M. Baldini, G. Cavoto, F. Cei, M. Chiappini, G. Chiarello, C. Chiri, G. Cocciolo, A. Corvaglia, F. Cuna, M. Francesconi, L. Galli, F. Grancagnolo, M. Grassi, R. Ishak, M. Meucci, D. Nicoló, M. Panareo, A. Papa, A. Pepino, F. Raffaelli, F. Renga, E. Ripiccini, G. Signorelli, G. F. Tassielli, R. Valentini , et al. (2 additional authors not shown)

Abstract: Ultra-thin metallic anodic and cathodic wires are frequently employed in low-mass gaseous detectors for precision experiments, where the amount of material crossed by charged particles must be minimised. We present here the results of an analysis of the mechanical stress and chemical corrosion effects observed in $40$ and $50~{\rm{μm}}$ diameter silver plated aluminum wires mounted within the volu… ▽ More Ultra-thin metallic anodic and cathodic wires are frequently employed in low-mass gaseous detectors for precision experiments, where the amount of material crossed by charged particles must be minimised. We present here the results of an analysis of the mechanical stress and chemical corrosion effects observed in $40$ and $50~{\rm{μm}}$ diameter silver plated aluminum wires mounted within the volume of the MEG\,II drift chamber, which caused the breaking of about one hundred wires (over a total of $\approx 12000$). This analysis is based on the accurate inspection of the broken wires by means of optical and electronic microscopes and on a detailed recording of all breaking accidents. We present a simple empirical model which relates the number of broken wires to their exposure time to atmospheric humidity and to their mechanical tension, which is necessary for mechanical stability in the presence of electrostatic fields of several kV/cm. Finally we discuss how wire breakings can be avoided or at least strongly reduced by operating in controlled atmosphere during the mounting stages of the wires within the drift chamber and by choosing a $25\,\%$ thicker wire diameter, which has very small effects on the detector resolution and efficiency and can be obtained by using a safer fabrication technique. △ Less

Submitted 22 November, 2021; v1 submitted 31 August, 2021; originally announced August 2021.

Comments: 14 pages, 9 figures

The Search for $μ^+\to e^+ γ$ with 10$^{-14}$ Sensitivity: the Upgrade of the MEG Experiment

Authors: The MEG II Collaboration, Alessandro M. Baldini, Vladimir Baranov, Michele Biasotti, Gianluigi Boca, Paolo W. Cattaneo, Gianluca Cavoto, Fabrizio Cei, Marco Chiappini, Gianluigi Chiarello, Alessandro Corvaglia, Federica Cuna, Giovanni dal Maso, Antonio de Bari, Matteo De Gerone, Marco Francesconi, Luca Galli, Giovanni Gallucci, Flavio Gatti, Francesco Grancagnolo, Marco Grassi, Dmitry N. Grigoriev, Malte Hildebrandt, Kei Ieki, Fedor Ignatov , et al. (45 additional authors not shown)

Abstract: The MEG experiment took data at the Paul Scherrer Institute in the years 2009--2013 to test the violation of the lepton flavour conservation law, which originates from an accidental symmetry that the Standard Model of elementary particle physics has, and published the most stringent limit on the charged lepton flavour violating decay $μ^+ \rightarrow {\rm e}^+ γ$: BR($μ^+ \rightarrow {\rm e}^+ γ$)… ▽ More The MEG experiment took data at the Paul Scherrer Institute in the years 2009--2013 to test the violation of the lepton flavour conservation law, which originates from an accidental symmetry that the Standard Model of elementary particle physics has, and published the most stringent limit on the charged lepton flavour violating decay $μ^+ \rightarrow {\rm e}^+ γ$: BR($μ^+ \rightarrow {\rm e}^+ γ$) $<4.2 \times 10^{-13}$ at 90% confidence level. The MEG detector has been upgraded in order to reach a sensitivity of $6\times10^{-14}$. The basic principle of MEG II is to achieve the highest possible sensitivity using the full muon beam intensity at the Paul Scherrer Institute ($7\times10^{7}$ muons/s) with an upgraded detector. The main improvements are better rate capability of all sub-detectors and improved resolutions while kee** the same detector concept. In this paper, we present the current status of the preparation, integration and commissioning of the MEG II detector in the recent engineering runs. △ Less

Submitted 1 September, 2021; v1 submitted 22 July, 2021; originally announced July 2021.

Comments: 12 pages, 4 figures. The version of acceptance for Symmetry

Journal ref: Symmetry 2021, 13(9), 1591

Detecting and quantifying palaeoseasonality in stalagmites using geochemical and modelling approaches

Authors: James U. L. Baldini, Franziska A. Lechleitner, Sebastian F. M. Breitenbach, Jeroen van Hunen, Lisa M. Baldini, Peter M. Wynn, Robert A. Jamieson, Harriet E. Ridley, Alex J. Baker, Izabela W. Walczak, Jens Fohlmeister

Abstract: Stalagmites are an extraordinarily powerful resource for the reconstruction of climatological palaeoseasonality. Here, we provide a comprehensive review of different types of seasonality preserved by stalagmites and methods for extracting this information. A new drip classification scheme is introduced, which facilitates the identification of stalagmites fed by seasonally responsive drips and whic… ▽ More Stalagmites are an extraordinarily powerful resource for the reconstruction of climatological palaeoseasonality. Here, we provide a comprehensive review of different types of seasonality preserved by stalagmites and methods for extracting this information. A new drip classification scheme is introduced, which facilitates the identification of stalagmites fed by seasonally responsive drips and which highlights the wide variability in drip types feeding stalagmites. This hydrological variability, combined with seasonality in Earth atmospheric processes, meteoric precipitation, biological processes within the soil, and cave atmosphere composition means that every stalagmite retains a different and distinct (but correct) record of environmental conditions. Replication of a record is extremely useful but should not be expected unless comparing stalagmites affected by the same processes in the same proportion. A short overview of common microanalytical techniques is presented, and suggested best practice discussed. In addition to geochemical methods, a new modelling technique for extracting meteoric precipitation and temperature palaeoseasonality from stalagmite d18O data is discussed and tested with both synthetic and real-world datasets. Finally, world maps of temperature, meteoric precipitation amount, and meteoric precipitation oxygen isotope ratio seasonality are presented and discussed, with an aim of hel** to identify regions most sensitive to shifts in seasonality. △ Less

Submitted 12 January, 2021; originally announced January 2021.

Journal ref: Quaternary Science Reviews 254, 106784 (2021)

The large scale polarization explorer (LSPE) for CMB measurements: performance forecast

Authors: The LSPE collaboration, G. Addamo, P. A. R. Ade, C. Baccigalupi, A. M. Baldini, P. M. Battaglia, E. S. Battistelli, A. Baù, P. de Bernardis, M. Bersanelli, M. Biasotti, A. Boscaleri, B. Caccianiga, S. Caprioli, F. Cavaliere, F. Cei, K. A. Cleary, F. Columbro, G. Coppi, A. Coppolecchia, F. Cuttaia, G. D'Alessandro, G. De Gasperis, M. De Petris, V. Fafone , et al. (80 additional authors not shown)

Abstract: [Abridged] The measurement of the polarization of the Cosmic Microwave Background radiation is one of the current frontiers in cosmology. In particular, the detection of the primordial B-modes, could reveal the presence of gravitational waves in the early Universe. The detection of such component is at the moment the most promising technique to probe the inflationary theory describing the very ear… ▽ More [Abridged] The measurement of the polarization of the Cosmic Microwave Background radiation is one of the current frontiers in cosmology. In particular, the detection of the primordial B-modes, could reveal the presence of gravitational waves in the early Universe. The detection of such component is at the moment the most promising technique to probe the inflationary theory describing the very early evolution of the Universe. We present the updated performance forecast of the Large Scale Polarization Explorer (LSPE), a program dedicated to the measurement of the CMB polarization. LSPE is composed of two instruments: Strip, a radiometer-based telescope on the ground in Tenerife, and SWIPE (Short-Wavelength Instrument for the Polarization Explorer) a bolometer-based instrument designed to fly on a winter arctic stratospheric long-duration balloon. The program is among the few dedicated to observation of the Northern Hemisphere, while most of the international effort is focused into ground-based observation in the Southern Hemisphere. Measurements are currently scheduled in Winter 2021/22 for SWIPE, with a flight duration up to 15 days, and in Summer 2021 with two years observations for Strip. We describe the main features of the two instruments, identifying the most critical aspects of the design, in terms of impact into performance forecast. We estimate the expected sensitivity of each instrument and propagate their combined observing power to the sensitivity to cosmological parameters, including the effect of scanning strategy, component separation, residual foregrounds and partial sky coverage. We also set requirements on the control of the most critical systematic effects and describe techniques to mitigate their impact. LSPE can reach a sensitivity in tensor-to-scalar ratio of $σ_r<0.01$, and improve constrains on other cosmological parameters. △ Less

Submitted 9 August, 2021; v1 submitted 25 August, 2020; originally announced August 2020.

Comments: Submitted to JCAP. Abstract abridged for arXiv submission

Journal ref: Journal of Cosmology and Astroparticle Physics, Volume 2021, August 2021

Effect of lateral confinement on the apparent mass of particle dampers

Authors: María Victoria Ferreyra, Mauro Baldini, Luis A. Pugnaloni, Stéphane Job

Abstract: We study, via DEM simulations, the apparent mass $m$ and loss factor $η$ of particle dampers (PD) attached to a vertically driven, single degree of freedom mechanical system. Although many studies focus on $η$, less work has been devoted to $m$. It has been recently demonstrated [M. Masmoudi \textit{et al}. Granular Matter 18 (2016) 71.] that $m$ non-linearly depends on the driving acceleration… ▽ More We study, via DEM simulations, the apparent mass $m$ and loss factor $η$ of particle dampers (PD) attached to a vertically driven, single degree of freedom mechanical system. Although many studies focus on $η$, less work has been devoted to $m$. It has been recently demonstrated [M. Masmoudi \textit{et al}. Granular Matter 18 (2016) 71.] that $m$ non-linearly depends on the driving acceleration $γ$ according to a power law, $m\proptoγ^k$. Experiments using 3D packings of particles suggest $k=-2$. However, simulations with 1D columns of particles on a vibrating plate and theoretical predictions based on the inelastic bouncing ball model (IBBM) suggest that $k=-1$. These findings left open questions whether m may depend on the dimensionality of the packing or on lateral interactions between walls and grains. In turn, $η$ was shown to follow a universal curve, $η\proptoγ^{-1}$, whatever the dimensionality and the constraints in the motion of the grains. In this work, we consider PD under different confinement conditions in the motion of the particles (1D, quasi-1D, quasi-2D and 3D). We find that the dynamical response of the PD ($m$ and $η$) is not sensitive to the lateral confinement or dimensionality. However, we have observed two distinct regimes: (i) In the inertial regime, $η$ decays according to the IBBM for all dimensions, $η\proptoγ^{-1}$, while $m$ falls with an apparent power law behaviour that matches Masmoudi's experiments, $m\proptoγ^{-2}$, for all dimensions but only in the range of moderate acceleration, before becoming negative for very high accelerations. (ii) In the quasi-static regime, both $m$ and $η$ display a complex behavior as functions of the excitation amplitude, but tend to the IBBM prediction, $m\proptoγ^{-1}$ and $η\proptoγ^{-1}$. △ Less

Submitted 15 July, 2020; originally announced July 2020.

Comments: 21 pages, 5 figures

The Drift Chamber of the MEG II experiment

Authors: G. F. Tassielli, A. M. Baldini, G. Cavoto, F. Cei, M. Chiappini, G. Chiarello, A. Corvaglia, M. Francesconi, L. Galli, F. Grancagnolo, M. Grassi, M. Hildebrandt, M. Meucci, A. Miccoli, D. Nicolò, M. Panareo, A. Papa, F. Raffaelli, F. Renga, P. Schwendimann, G. Signorelli, C. Voena

Abstract: The MEG experiment at the Paul Scherrer Institut searches for the charged-Lepton-Flavor-Violating mu+ -> e+ gamma decay. MEG has already set the world best upper limit on the branching ratio: BR<4.2x10^-13 @ 90% C.l. An upgrade (MEG II) of the whole detector has been approved to obtain a substantial increase of sensitivity. Currently MEG II is completing the upgrade of the various detectors, an en… ▽ More The MEG experiment at the Paul Scherrer Institut searches for the charged-Lepton-Flavor-Violating mu+ -> e+ gamma decay. MEG has already set the world best upper limit on the branching ratio: BR<4.2x10^-13 @ 90% C.l. An upgrade (MEG II) of the whole detector has been approved to obtain a substantial increase of sensitivity. Currently MEG II is completing the upgrade of the various detectors, an engineering run and a pre-commissioning run were carried out during 2018 and 2019. The new positron tracker is a unique volume, ultra-light He based cylindrical drift chamber (CDCH), with high granularity: 9 layers of 192 square drift cells, ~6-9 mm wide, consist of ~12000 wires in a full stereo configuration. To ensure the electrostatic stability of the drift cells a new wiring strategy should be developed due to the high wire density (12 wires/cm^2 ), the stringent precision requirements on the wire position and uniformity of the wire mechanical tension (better than 0.5 g) The basic idea is to create multiwire frames, by soldering a set of (16 or 32) wires on 40 um thick custom wire-PCBs. Multiwire frames and PEEK spacers are overlapped alternately along the radius, to set the proper cell width, in each of the twelve sectors defined by the spokes of the rudder wheel shaped end-plates. Despite to the conceptual simplicity of the assembling strategies, the building of the multiwire frames, with the set requirements, imposes a use of an automatic wiring system. The MEG II CDCH is the first cylindrical drift chamber ever designed and built in a modular way and it will allow to track positrons, with a momentum greater than 45 MeV/c, with high efficiency by using a very small amount of material, 1.5x10^-3 X0 . We describe the CDCH design and construction, the wiring phase at INFN-Lecce, the choice of the wires, their mechanical properties, the assembly and sealing at INFN-Pisa and the commissioning. △ Less

Submitted 4 June, 2020; v1 submitted 3 June, 2020; originally announced June 2020.

Comments: 11 pages, 8 figures, 1 table, proceeding at INSTR'20 conference, accepted for publication in JINST

Commissioning of the MEG II tracker system

Authors: M. Chiappini, A. M. Baldini, G. Cavoto, F. Cei, G. Chiarello, A. Corvaglia, M. Francesconi, L. Galli, F. Grancagnolo, M. Grassi, M. Hildebrandt, M. Meucci, A. Miccoli, D. Nicolò, M. Panareo, A. Papa, F. Raffaelli, F. Renga, P. Schwendimann, G. Signorelli, G. F. Tassielli, C. Voena

Abstract: The MEG experiment at the Paul Scherrer Institut (PSI) represents the state of the art in the search for the charged Lepton Flavour Violating (cLFV) $μ^+ \rightarrow e^+ γ$ decay. With the phase 1, MEG set the new world best upper limit on the $\mbox{BR}(μ^+ \rightarrow e^+ γ) < 4.2 \times 10^{-13}$ (90% C.L.). With the phase 2, MEG II, the experiment aims at reaching a sensitivity enhancement of… ▽ More The MEG experiment at the Paul Scherrer Institut (PSI) represents the state of the art in the search for the charged Lepton Flavour Violating (cLFV) $μ^+ \rightarrow e^+ γ$ decay. With the phase 1, MEG set the new world best upper limit on the $\mbox{BR}(μ^+ \rightarrow e^+ γ) < 4.2 \times 10^{-13}$ (90% C.L.). With the phase 2, MEG II, the experiment aims at reaching a sensitivity enhancement of about one order of magnitude compared to the previous MEG result. The new Cylindrical Drift CHamber (CDCH) is a key detector for MEG II. CDCH is a low-mass single volume detector with high granularity: 9 layers of 192 drift cells, few mm wide, defined by $\sim 12000$ wires in a stereo configuration for longitudinal hit localization. The filling gas mixture is Helium:Isobutane (90:10). The total radiation length is $1.5 \times 10^{-3}$ $\mbox{X}_0$, thus minimizing the Multiple Coulomb Scattering (MCS) contribution and allowing for a single-hit resolution $< 120$ $μ$m and an angular and momentum resolutions of 6 mrad and 90 keV/c respectively. This article presents the CDCH commissioning activities at PSI after the wiring phase at INFN Lecce and the assembly phase at INFN Pisa. The endcaps preparation, HV tests and conditioning of the chamber are described, aiming at reaching the final stable working point. The integration into the MEG II experimental apparatus is described, in view of the first data taking with cosmic rays and $μ^+$ beam during the 2018 and 2019 engineering runs. The first gas gain results are also shown. A full engineering run with all the upgraded detectors and the complete DAQ electronics is expected to start in 2020, followed by three years of physics data taking. △ Less

Submitted 5 May, 2020; originally announced May 2020.

Comments: 10 pages, 12 figures, 1 table, proceeding at INSTR'20 conference, accepted for publication in JINST

The new drift chamber of the MEG II experiment

Authors: M. Chiappini, A. M. Baldini, G. Cavoto, F. Cei, G. Chiarello, M. Francesconi, L. Galli, F. Grancagnolo, M. Grassi, M. Hildebrandt, D. Nicolò, M. Panareo, A. Papa, F. Raffaelli, F. Renga, G. Signorelli, G. F. Tassielli, C. Voena

Abstract: This article presents the MEG II Cylindrical Drift CHamber (CDCH), a key detector for the phase 2 of MEG, which aims at reaching a sensitivity level of the order of $6 \times 10^{-14}$ for the charged Lepton Flavour Violating $μ^+ \rightarrow \mbox{e}^+ γ$ decay. CDCH is designed to overcome the limitations of the MEG $\mbox{e}^+$ tracker and guarantee the proper operation at high rates with long-… ▽ More This article presents the MEG II Cylindrical Drift CHamber (CDCH), a key detector for the phase 2 of MEG, which aims at reaching a sensitivity level of the order of $6 \times 10^{-14}$ for the charged Lepton Flavour Violating $μ^+ \rightarrow \mbox{e}^+ γ$ decay. CDCH is designed to overcome the limitations of the MEG $\mbox{e}^+$ tracker and guarantee the proper operation at high rates with long-term detector stability. CDCH is a low-mass unique volume detector with high granularity: 9 layers of 192 drift cells, few mm wide, defined by $\approx 12000$ wires in a stereo configuration for longitudinal hit localization. The total radiation length is $1.5 \times 10^{-3}$ $\mbox{X}_0$, thus minimizing the Multiple Coulomb Scattering (MCS) contribution and allowing for a single-hit resolution of 110 $μ$m and a momentum resolution of 130 keV/c. CDCH integration into the MEG II experimental apparatus will start in this year. △ Less

Submitted 5 May, 2020; originally announced May 2020.

Comments: 2 pages, 3 figures, proceeding at PisaMeeting2018 conference, published in NIMA

Journal ref: Nuclear Inst. and Methods in Physics Research A (2019)

Progress report on the Large Scale Polarization Explorer

Authors: L. Lamagna, G. Addamo, P. A. R. Ade, C. Baccigalupi, A. M. Baldini, P. M. Battaglia, E. Battistelli, A. Baù, M. Bersanelli, M. Biasotti, C. Boragno, A. Boscaleri, B. Caccianiga, S. Caprioli, F. Cavaliere, F. Cei, K. A. Cleary, F. Columbro, G. Coppi, A. Coppolecchia, D. Corsini, F. Cuttaia, G. D'Alessandro, P. de Bernardis, G. De Gasperis , et al. (74 additional authors not shown)

Abstract: The Large Scale Polarization Explorer (LSPE) is a cosmology program for the measurement of large scale curl-like features (B-modes) in the polarization of the Cosmic Microwave Background. Its goal is to constrain the background of inflationary gravity waves traveling through the universe at the time of matter-radiation decoupling. The two instruments of LSPE are meant to synergically operate by co… ▽ More The Large Scale Polarization Explorer (LSPE) is a cosmology program for the measurement of large scale curl-like features (B-modes) in the polarization of the Cosmic Microwave Background. Its goal is to constrain the background of inflationary gravity waves traveling through the universe at the time of matter-radiation decoupling. The two instruments of LSPE are meant to synergically operate by covering a large portion of the northern microwave sky. LSPE/STRIP is a coherent array of receivers planned to be operated from the Teide Observatory in Tenerife, for the control and characterization of the low-frequency polarized signals of galactic origin; LSPE/SWIPE is a balloon-borne bolometric polarimeter based on 330 large throughput multi-moded detectors, designed to measure the CMB polarization at 150 GHz and to monitor the polarized emission by galactic dust above 200 GHz. The combined performance and the expected level of systematics mitigation will allow LSPE to constrain primordial B-modes down to a tensor/scalar ratio of $10^{-2}$. We here report the status of the STRIP pre-commissioning phase and the progress in the characterization of the key subsystems of the SWIPE payload (namely the cryogenic polarization modulation unit and the multi-moded TES pixels) prior to receiver integration. △ Less

Submitted 5 May, 2020; v1 submitted 3 May, 2020; originally announced May 2020.

Comments: 8 pages, 5 figures, Accepted for publication in Journal of Low Temperature Physics

Search for lepton flavour violating muon decay mediated by a new light particle in the MEG experiment

Authors: A. M. Baldini, F. Berg, M. Biasotti, G. Boca, P. W. Cattaneo, G. Cavoto, F. Cei, M. Chiappini, G. Chiarello, C. Chiri, A. Corvaglia, A. de Bari, M. De Gerone, M. Francesconi, L. Galli, F. Gatti, F. Grancagnolo, M. Grassi, D. N. Grigoriev, M. Hildebrandt, Z. Hodge, K. Ieki, F. Ignatov, R. Iwai, T. Iwamoto , et al. (46 additional authors not shown)

Abstract: We present the first direct search for lepton flavour violating muon decay mediated by a new light particle X, $μ^+ \to \mathrm{e}^+\mathrm{X}, \mathrm{X} \to γγ$. This search uses a dataset resulting from $7.5\times 10^{14}$ stopped muons collected by the MEG experiment at the Paul Scherrer Institut in the period 2009--2013. No significant excess is found in the mass region 20--45 MeV/c$^2$ for l… ▽ More We present the first direct search for lepton flavour violating muon decay mediated by a new light particle X, $μ^+ \to \mathrm{e}^+\mathrm{X}, \mathrm{X} \to γγ$. This search uses a dataset resulting from $7.5\times 10^{14}$ stopped muons collected by the MEG experiment at the Paul Scherrer Institut in the period 2009--2013. No significant excess is found in the mass region 20--45 MeV/c$^2$ for lifetimes below 40 ps, and we set the most stringent branching ratio upper limits in the mass region of 20--40 MeV/c$^2$, down to $\mathcal{O}(10^{-11})$ at 90\% confidence level. △ Less

Submitted 8 November, 2020; v1 submitted 1 May, 2020; originally announced May 2020.

Evidence for superconductivity above 260 K in lanthanum superhydride at megabar pressures

Authors: Maddury Somayazulu, Muhtar Ahart, Ajay K Mishra, Zachary M. Geballe, Maria Baldini, Yue Meng, Viktor V. Struzhkin, Russell J. Hemley

Abstract: Recent predictions and experimental observations of high Tc superconductivity in hydrogen-rich materials at very high pressures are driving the search for superconductivity in the vicinity of room temperature. We have developed a novel preparation technique that is optimally suited for megabar pressure syntheses of superhydrides using pulsed laser heating while maintaining the integrity of sample-… ▽ More Recent predictions and experimental observations of high Tc superconductivity in hydrogen-rich materials at very high pressures are driving the search for superconductivity in the vicinity of room temperature. We have developed a novel preparation technique that is optimally suited for megabar pressure syntheses of superhydrides using pulsed laser heating while maintaining the integrity of sample-probe contacts for electrical transport measurements to 200 GPa. We detail the synthesis and characterization, including four-probe electrical transport measurements, of lanthanum superhydride samples that display a significant drop in resistivity on cooling beginning around 260 K and pressures of 190 GPa. Additional measurements on two additional samples synthesized the same way show resistance drops beginning as high as 280 K at these pressures. The loss of resistance at these high temperatures is not observed in control experiments on pure La as well as in partially transformed samples at these pressures, and x-ray diffraction as a function of temperature on the superhydride reveal no structural changes on cooling. We infer that the resistance drop is a signature of the predicted room-temperature superconductivity in LaH10, in good agreement with density functional structure search and BCS theory calculations. △ Less

Submitted 29 August, 2018; v1 submitted 23 August, 2018; originally announced August 2018.

Comments: 20 pages, 4 figures and Supplementary Materials , added some references, edited and corrected several typos, no change in results

Journal ref: Phys. Rev. Lett. 122, 027001 (2019)

The WaveDAQ integrated Trigger and Data Acquisition System for the MEG II experiment

Authors: Marco Francesconi, Alessandro Massimo Baldini, Fabrizio Cei, Marco Chiappini, Luca Galli, Marco Grassi, Ueli Hartmann, Manuel Meucci, Fabio Morsani, Donato Nicolò, Angela Papa, Stefan Ritt, Elmar Schmid, Giovanni Signorelli

Abstract: The WaveDAQ is a newly-designed digitization Trigger and Data AcQuisition system (TDAQ) allowing Multi-gigasample waveform recording on a large amount of channels (up to 16384) by using the DRS4 analog switched capacitor array as downconverting ASIC. A high bandwidth, programmable input stage has been coupled with a bias generator to allow SiPM operation without need of any other external apparatu… ▽ More The WaveDAQ is a newly-designed digitization Trigger and Data AcQuisition system (TDAQ) allowing Multi-gigasample waveform recording on a large amount of channels (up to 16384) by using the DRS4 analog switched capacitor array as downconverting ASIC. A high bandwidth, programmable input stage has been coupled with a bias generator to allow SiPM operation without need of any other external apparatus. The trigger generation is tightly coupled within the system to limit the required depth of the analog memory, allowing faster digitization speeds. This system has been designed for the MEG experiment upgrade but also proved to be highly scalable and already found other applications. △ Less

Submitted 24 June, 2018; originally announced June 2018.

Comments: This manuscript is for conference record of the 21st IEEE Real Time conference only

Gas Distribution and Monitoring for the Drift Chamber of the MEG-II Experiment

Authors: A. M. Baldini, E. Baracchini, G. Cavoto, F. Cei, M. Chiappini, G. Chiarello, C. Chiri, M. Francesconi, L. Galli, F. Grancagnolo, M. Grassi, M. Hildebrandt, V. Martinelli, M. Meucci, D. Nicolò, M. Panareo, A. Papa, A. Pepino, B. Pruneti, F. Raffaelli, F. Renga, E. Ripiccini, G. Signorelli, G. F. Tassielli, C. Voena

Abstract: The reconstruction of the positron trajectory in the MEG-II experiment searching for the $μ^+ \to e^+ γ$ decay uses a cylindrical drift chamber operated with a helium-isobutane gas mixture. A stable performance of the detector in terms of its electron drift properties, avalanche multiplication, and with a gas mixture of controlled composition and purity has to be provided and continuously monitore… ▽ More The reconstruction of the positron trajectory in the MEG-II experiment searching for the $μ^+ \to e^+ γ$ decay uses a cylindrical drift chamber operated with a helium-isobutane gas mixture. A stable performance of the detector in terms of its electron drift properties, avalanche multiplication, and with a gas mixture of controlled composition and purity has to be provided and continuously monitored. In this paper we describe the strategies adopted to meet the requirements imposed by the target sensitivity of MEG-II, including the construction and commissioning of a small chamber for an online monitoring of the gas quality. △ Less

Submitted 23 April, 2018; originally announced April 2018.

Comments: 12 pages, 6 figures, submitted to Journal of Instrumentation

The design of the MEG II experiment

Authors: A. M. Baldini, E. Baracchini, C. Bemporad, F. Berg, M. Biasotti, G. Boca, P. W. Cattaneo, G. Cavoto, F. Cei, M. Chiappini, G. Chiarello, C. Chiri, G. Cocciolo, A. Corvaglia, A. de Bari, M. De Gerone, A. D'Onofrio, M. Francesconi, Y. Fujii, L. Galli, F. Gatti, F. Grancagnolo, M. Grassi, D. N. Grigoriev, M. Hildebrandt , et al. (55 additional authors not shown)

Abstract: The MEG experiment, designed to search for the mu+->e+ gamma decay at a 10^-13 sensitivity level, completed data taking in 2013. In order to increase the sensitivity reach of the experiment by an order of magnitude to the level of 6 x 10-14 for the branching ratio, a total upgrade, involving substantial changes to the experiment, has been undertaken, known as MEG II. We present both the motivation… ▽ More The MEG experiment, designed to search for the mu+->e+ gamma decay at a 10^-13 sensitivity level, completed data taking in 2013. In order to increase the sensitivity reach of the experiment by an order of magnitude to the level of 6 x 10-14 for the branching ratio, a total upgrade, involving substantial changes to the experiment, has been undertaken, known as MEG II. We present both the motivation for the upgrade and a detailed overview of the design of the experiment and of the expected detector performance. △ Less

Submitted 15 January, 2018; originally announced January 2018.

Comments: 61 pages and 97 figures

Journal ref: Eur. Phys. J. C 78 (380) (2018)

Single-hit resolution measurement with MEG II drift chamber prototypes

Authors: A. M. Baldini, E. Baracchini, G. Cavoto, M. Cascella, F. Cei, M. Chiappini, G. Chiarello, C. Chiri, S. Dussoni, L. Galli, F. Grancagnolo, M. Grassi, V. Martinelli, D. Nicolò, M. Panareo, A. Pepino, G. Piredda, F. Renga, E. Ripiccini, G. Signorelli, G. F. Tassielli, F. Tenchini, M. Venturini, C. Voena

Abstract: Drift chambers operated with helium-based gas mixtures represent a common solution for tracking charged particles kee** the material budget in the sensitive volume to a minimum. The drawback of this solution is the worsening of the spatial resolution due to primary ionisation fluctuations, which is a limiting factor for high granularity drift chambers like the MEG II tracker. We report on the me… ▽ More Drift chambers operated with helium-based gas mixtures represent a common solution for tracking charged particles kee** the material budget in the sensitive volume to a minimum. The drawback of this solution is the worsening of the spatial resolution due to primary ionisation fluctuations, which is a limiting factor for high granularity drift chambers like the MEG II tracker. We report on the measurements performed on three different prototypes of the MEG II drift chamber aimed at determining the achievable single-hit resolution. The prototypes were operated with helium/isobutane gas mixtures and exposed to cosmic rays, electron beams and radioactive sources. Direct measurements of the single hit resolution performed with an external tracker returned a value of 110 $μ$m, consistent with the values obtained with indirect measurements performed with the other prototypes. △ Less

Submitted 25 May, 2016; originally announced May 2016.

Comments: 18 pages, 18 figures

Muon polarization in the MEG experiment: predictions and measurements

Authors: A. M. Baldini, Y. Bao, E. Baracchini, C. Bemporad, F. Berg, M. Biasotti, G. Boca, P. W. Cattaneo, G. Cavoto, F. Cei, G. Chiarello, C. Chiri, A. De Bari, M. De Gerone, A. DÓnofrio, S. Dussoni, Y. Fujii, L. Galli, F. Gatti, F. Grancagnolo, M. Grassi, A. Graziosi, D. N. Grigoriev, T. Haruyama, M. Hildebrandt , et al. (45 additional authors not shown)

Abstract: The MEG experiment makes use of one of the world's most intense low energy muon beams, in order to search for the lepton flavour violating process $μ^{+} \rightarrow {\rm e}^{+} γ$. We determined the residual beam polarization at the thin stop** target, by measuring the asymmetry of the angular distribution of Michel decay positrons as a function of energy. The initial muon beam polarization at… ▽ More The MEG experiment makes use of one of the world's most intense low energy muon beams, in order to search for the lepton flavour violating process $μ^{+} \rightarrow {\rm e}^{+} γ$. We determined the residual beam polarization at the thin stop** target, by measuring the asymmetry of the angular distribution of Michel decay positrons as a function of energy. The initial muon beam polarization at the production is predicted to be $P_μ = -1$ by the Standard Model (SM) with massless neutrinos. We estimated our residual muon polarization to be $P_μ = -0.85 \pm 0.03 ~ {\rm (stat)} ~ { }^{+ 0.04}_{-0.05} ~ {\rm (syst)}$ at the stop** target, which is consistent with the SM predictions when the depolarizing effects occurring during the muon production, propagation and moderation in the target are taken into account. The knowledge of beam polarization is of fundamental importance in order to model the background of our ${\megsign}$ search induced by the muon radiative decay: $μ^{+} \rightarrow {\rm e}^{+} \barν_μ ν_{\rm e} γ$. △ Less

Submitted 28 April, 2016; v1 submitted 15 October, 2015; originally announced October 2015.

Journal ref: Eur. Phys. J. C (2016) 76:223

Percolative Metal-Insulator Transition in LaMnO$_3$

Authors: M. Sherafati, M. Baldini, L. Malavasi, S. Satpathy

Abstract: We show that the pressure-induced metal-insulator transition (MIT) in LaMnO$_3$ is fundamentally different from the Mott-Hubbard transition and is percolative in nature, with the measured resistivity obeying the percolation scaling laws. Using the Gutzwiller method to treat correlation effects in a model Hamiltonian that includes both Coulomb and Jahn-Teller interactions, we show, One, that the MI… ▽ More We show that the pressure-induced metal-insulator transition (MIT) in LaMnO$_3$ is fundamentally different from the Mott-Hubbard transition and is percolative in nature, with the measured resistivity obeying the percolation scaling laws. Using the Gutzwiller method to treat correlation effects in a model Hamiltonian that includes both Coulomb and Jahn-Teller interactions, we show, One, that the MIT is driven by a competition between electronic correlation and the electron-lattice interaction, an issue that has been long debated, and Two, that with compressed volume, the system has a tendency towards phase separation into insulating and metallic regions, consisting, respectively, of Jahn-Teller distorted and undistorted octahedra. This tendency manifests itself in a mixed phase of intermixed insulating and metallic regions in the experiment. Conduction in the mixed phase occurs by percolation and the MIT occurs when the metallic volume fraction, steadily increasing with pressure, exceeds the percolation threshold $v_c \approx 0.29$. Measured high-pressure resistivity follows the percolation scaling laws quite well, establishing the percolative nature of conduction, and the temperature dependence follows the Efros-Shklovskii variable-range hop** behavior for granular materials. △ Less

Submitted 22 November, 2015; v1 submitted 23 July, 2015; originally announced July 2015.

Comments: 5 pages, 4 figures. This version contains more details on the fitting of the transport data (Fig. 5)

Journal ref: Phys. Rev. B 93, 024107-Published 13 January 2016

Measurement of the radiative decay of polarized muons in the MEG experiment

Authors: MEG Collaboration, A. M. Baldini, Y. Bao, E. Baracchini, C. Bemporad, F. Berg, M. Biasotti, G. Boca, P. W. Cattaneo, G. Cavoto, F. Cei, G. Chiarello, C. Chiri, A. de Bari, M. De Gerone, A. D'Onofrio, S. Dussoni, Y. Fujii, L. Galli, F. Gatti, F. Grancagnolo, M. Grassi, A. Graziosi, D. N. Grigoriev, T. Haruyama , et al. (46 additional authors not shown)

Abstract: We studied the radiative muon decay $μ^+ \to e^+ν\barνγ$ by using for the first time an almost fully polarized muon source. We identified a large sample (~13000) of these decays in a total sample of 1.8x10^14 positive muon decays collected in the MEG experiment in the years 2009--2010 and measured the branching ratio B($μ^+ \to e^+ν\barνγ$) = (6.03+-0.14(stat.)+-0.53(sys.))x10^-8 for E_e > 45 MeV… ▽ More We studied the radiative muon decay $μ^+ \to e^+ν\barνγ$ by using for the first time an almost fully polarized muon source. We identified a large sample (~13000) of these decays in a total sample of 1.8x10^14 positive muon decays collected in the MEG experiment in the years 2009--2010 and measured the branching ratio B($μ^+ \to e^+ν\barνγ$) = (6.03+-0.14(stat.)+-0.53(sys.))x10^-8 for E_e > 45 MeV and E_γ > 40 MeV, consistent with the Standard Model prediction. The precise measurement of this decay mode provides a basic tool for the timing calibration, a normalization channel, and a strong quality check of the complete MEG experiment in the search for $μ^+ \to e^+γ$ process. △ Less

Submitted 7 March, 2016; v1 submitted 11 December, 2013; originally announced December 2013.

Comments: 8 pages, 7 figures. Added an introduction to NLO calculation which was recently calculated. Published version

Journal ref: Eur. Phys. J. C (2016) 76:108

The MEG detector for $μ+\to e+γ$ decay search

Authors: J. Adam, X. Bai, A. M. Baldini, E. Baracchini, C. Bemporad, G. Boca, P. W. Cattaneo, G. Cavoto, F. Cei, C. Cerri, M. Corbo, N. Curalli, A. De Bari, M. De Gerone, L. Del Frate, S. Doke, S. Dussoni, J. Egger, K. Fratini, Y. Fujii, L. Galli, S. Galeotti, G. Gallucci, F. Gatti, B. Golden , et al. (51 additional authors not shown)

Abstract: The MEG (Mu to Electron Gamma) experiment has been running at the Paul Scherrer Institut (PSI), Switzerland since 2008 to search for the decay \meg\ by using one of the most intense continuous $μ^+$ beams in the world. This paper presents the MEG components: the positron spectrometer, including a thin target, a superconducting magnet, a set of drift chambers for measuring the muon decay vertex and… ▽ More The MEG (Mu to Electron Gamma) experiment has been running at the Paul Scherrer Institut (PSI), Switzerland since 2008 to search for the decay \meg\ by using one of the most intense continuous $μ^+$ beams in the world. This paper presents the MEG components: the positron spectrometer, including a thin target, a superconducting magnet, a set of drift chambers for measuring the muon decay vertex and the positron momentum, a timing counter for measuring the positron time, and a liquid xenon detector for measuring the photon energy, position and time. The trigger system, the read-out electronics and the data acquisition system are also presented in detail. The paper is completed with a description of the equipment and techniques developed for the calibration in time and energy and the simulation of the whole apparatus. △ Less

Submitted 10 April, 2013; v1 submitted 10 March, 2013; originally announced March 2013.

Comments: 59 pages, 90 figures

Journal ref: Eur. Phys. J. C, 73 (2013) 2365

New constraint on the existence of the mu+-> e+ gamma decay

Authors: MEG Collaboration, J. Adam, X. Bai, A. M. Baldini, E. Baracchini, C. Bemporad, G. Boca, P. W. Cattaneo, G. Cavoto, F. Cei, C. Cerri, A. de Bari, M. De Gerone, T. Doke, S. Dussoni, J. Egger, K. Fratini, Y. Fujii, L. Galli, G. Gallucci, F. Gatti, B. Golden, M. Grassi, A. Graziosi, D. N. Grigoriev , et al. (49 additional authors not shown)

Abstract: The analysis of a combined data set, totaling 3.6 \times 10^14 stopped muons on target, in the search for the lepton flavour violating decay mu^+ -> e^+ gamma is presented. The data collected by the MEG experiment at the Paul Scherrer Institut show no excess of events compared to background expectations and yield a new upper limit on the branching ratio of this decay of 5.7 \times 10^-13 (90% conf… ▽ More The analysis of a combined data set, totaling 3.6 \times 10^14 stopped muons on target, in the search for the lepton flavour violating decay mu^+ -> e^+ gamma is presented. The data collected by the MEG experiment at the Paul Scherrer Institut show no excess of events compared to background expectations and yield a new upper limit on the branching ratio of this decay of 5.7 \times 10^-13 (90% confidence level). This represents a four times more stringent limit than the previous world best limit set by MEG. △ Less

Submitted 23 April, 2013; v1 submitted 4 March, 2013; originally announced March 2013.

Comments: 5 pages, 3 figures, a version accepted in Phys. Rev. Lett

MEG Upgrade Proposal

Authors: A. M. Baldini, F. Cei, C. Cerri, S. Dussoni, L. Galli, M. Grassi, D. Nicolò, F. Raffaelli, F. Sergiampietri, G. Signorelli, F. Tenchini, D. Bagliani, M. De Gerone, F. Gatti, E. Baracchini, Y. Fujii, T. Iwamoto, D. Kaneko, T. Mori, M. Nishimura, W. Ootani, R. Sawada, Y. Uchiyama, G. Boca, P. W. Cattaneo , et al. (43 additional authors not shown)

Abstract: We propose the continuation of the MEG experiment to search for the charged lepton flavour violating decay (cLFV) μ\to e γ, based on an upgrade of the experiment, which aims for a sensitivity enhancement of one order of magnitude compared to the final MEG result, down to the $6 \times 10^{-14}$ level. The key features of this new MEG upgrade are an increased rate capability of all detectors to ena… ▽ More We propose the continuation of the MEG experiment to search for the charged lepton flavour violating decay (cLFV) μ\to e γ, based on an upgrade of the experiment, which aims for a sensitivity enhancement of one order of magnitude compared to the final MEG result, down to the $6 \times 10^{-14}$ level. The key features of this new MEG upgrade are an increased rate capability of all detectors to enable running at the intensity frontier and improved energy, angular and timing resolutions, for both the positron and photon arms of the detector. On the positron-side a new low-mass, single volume, high granularity tracker is envisaged, in combination with a new highly segmented, fast timing counter array, to track positron from a thinner stop** target. The photon-arm, with the largest liquid xenon (LXe) detector in the world, totalling 900 l, will also be improved by increasing the granularity at the incident face, by replacing the current photomultiplier tubes (PMTs) with a larger number of smaller photosensors and optimizing the photosensor layout also on the lateral faces. A new DAQ scheme involving the implementation of a new combined readout board capable of integrating the diverse functions of digitization, trigger capability and splitter functionality into one condensed unit, is also under development. We describe here the status of the MEG experiment, the scientific merits of the upgrade and the experimental methods we plan to use. △ Less

Submitted 4 February, 2013; v1 submitted 30 January, 2013; originally announced January 2013.

Comments: A. M. Baldini and T. Mori Spokespersons. Research proposal submitted to the Paul Scherrer Institute Research Committee for Particle Physics at the Ring Cyclotron. 131 Pages

Pressure induced magnetic phase separation in La$_{0.75}$Ca$_{0.25}$MnO$_{3}$ manganite

Authors: M. Baldini, L. Capogna, M. Capone, E. Arcangeletti, C. Petrillo, I. Goncharenko, P. Postorino

Abstract: The pressure dependence of the Curie temperature T$_{C}(P)$ in La$_{0.75}$Ca$_{0.25}$MnO$_{3}$ was determined by neutron diffraction up to 8 GPa, and compared with the metallization temperature T$_{IM}(P)$ \cite{irprl}. The behavior of the two temperatures appears similar over the whole pressure range suggesting a key role of magnetic double exchange also in the pressure regime where the superexch… ▽ More The pressure dependence of the Curie temperature T$_{C}(P)$ in La$_{0.75}$Ca$_{0.25}$MnO$_{3}$ was determined by neutron diffraction up to 8 GPa, and compared with the metallization temperature T$_{IM}(P)$ \cite{irprl}. The behavior of the two temperatures appears similar over the whole pressure range suggesting a key role of magnetic double exchange also in the pressure regime where the superexchange interaction is dominant. Coexistence of antiferromagnetic and ferromagnetic peaks at high pressure and low temperature indicates a phase separated regime which is well reproduced with a dynamical mean-field calculation for a simplified model. A new P-T phase diagram has been proposed on the basis of the whole set of experimental data. △ Less

Submitted 8 December, 2011; originally announced December 2011.

Comments: 5 pages, 4 figures

Journal ref: J. Phys.: Condens. Matter 24 045601 (2012)

The effect of compressive strain on the Raman modes of the dry and hydrated BaCe0.8Y0.2O3 proton conductor

Authors: Qianli Chen, Tzu-Wen Huang, Maria Baldini, Anwar Hushur, Vladimir Pomjakushin, Simon Clark, Wendy L. Mao, Murli H. Manghnani, Artur Braun, Thomas Graule

Abstract: The BaCe0.8Y0.2O3-δ proton conductor under hydration and under compressive strain has been analyzed with high pressure Raman spectroscopy and high pressure x-ray diffraction. The pressure dependent variation of the Ag and B2g bending modes from the O-Ce-O unit is suppressed when the proton conductor is hydrated, affecting directly the proton transfer by locally changing the electron density of the… ▽ More The BaCe0.8Y0.2O3-δ proton conductor under hydration and under compressive strain has been analyzed with high pressure Raman spectroscopy and high pressure x-ray diffraction. The pressure dependent variation of the Ag and B2g bending modes from the O-Ce-O unit is suppressed when the proton conductor is hydrated, affecting directly the proton transfer by locally changing the electron density of the oxygen ions. Compressive strain causes a hardening of the Ce-O stretching bond. The activation barrier for proton conductivity is raised, in line with recent findings using high pressure and high temperature impedance spectroscopy. The increasing Raman frequency of the B1g and B3g modes thus implies that the phonons become hardened and increase the vibration energy in the a-c crystal plane upon compressive strain, whereas phonons are relaxed in the b-axis, and thus reveal softening of the Ag and B2g modes. Lattice toughening in the a-c crystal plane raises therefore a higher activation barrier for proton transfer and thus anisotropic conductivity. The experimental findings of the interaction of protons with the ceramic host lattice under external strain may provide a general guideline for yet to develop epitaxial strained proton conducting thin film systems with high proton mobility and low activation energy. △ Less

Submitted 26 November, 2011; originally announced November 2011.

New limit on the lepton-flavour violating decay mu -> e gamma

Authors: MEG collaboration, J. Adam, X. Bai, A. M. Baldini, E. Baracchini, C. Bemporad, G. Boca, P. W. Cattaneo, G. Cavoto, F. Cei, C. Cerri, A. de Bari, M. De Gerone, T. Doke, S. Dussoni, J. Egger, K. Fratini, Y. Fujii, L. Galli, G. Gallucci, F. Gatti, B. Golden, M. Grassi, D. N. Grigoriev, T. Haruyama , et al. (42 additional authors not shown)

Abstract: We present a new result based on an analysis of the data collected by the MEG detector at the Paul Scherrer Institut in 2009 and 2010, in search of the lepton flavour violating decay mu->e gamma. The likelihood analysis of the combined data sample, which corresponds to a total of 1.8 x 10**14 muon decays, gives a 90% C.L. upper limit of 2.4 x 10**-12 on the branching ratio of the mu->e gamma decay… ▽ More We present a new result based on an analysis of the data collected by the MEG detector at the Paul Scherrer Institut in 2009 and 2010, in search of the lepton flavour violating decay mu->e gamma. The likelihood analysis of the combined data sample, which corresponds to a total of 1.8 x 10**14 muon decays, gives a 90% C.L. upper limit of 2.4 x 10**-12 on the branching ratio of the mu->e gamma decay, constituting the most stringent limit on the existence of this decay to date. △ Less

Submitted 2 September, 2011; v1 submitted 27 July, 2011; originally announced July 2011.

Comments: 5 pages, 2 figures, accepted for publication at Phys. Rev. Lett

Journal ref: Phys. Rev. Lett. 107, 171801 (2011)

Pressure-induced quenching of the charge-density-wave state observed by x-ray diffraction

Authors: A. Sacchetti, C. L. Condron, S. N. Gvasaliya, F. Pfuner, M. Lavagnini, M. Baldini, M. F. Toney, M. Merlini, M. Hanfland, J. Mesot, J. -H. Chu, I. R. Fisher, P. Postorino, L. Degiorgi

Abstract: We report an x-ray diffraction study on the charge-density-wave (CDW) LaTe$_3$ and CeTe$_3$ compounds as a function of pressure. We extract the lattice constants and the CDW modulation wave-vector, and provide direct evidence for a pressure-induced quenching of the CDW phase. We observe subtle differences between the chemical and mechanical compression of the lattice. We account for these with a… ▽ More We report an x-ray diffraction study on the charge-density-wave (CDW) LaTe$_3$ and CeTe$_3$ compounds as a function of pressure. We extract the lattice constants and the CDW modulation wave-vector, and provide direct evidence for a pressure-induced quenching of the CDW phase. We observe subtle differences between the chemical and mechanical compression of the lattice. We account for these with a scenario where the effective dimensionality in these CDW systems is dependent on the type of lattice compression and has a direct impact on the degree of Fermi surface nesting and on the strength of fluctuation effects. △ Less

Submitted 3 November, 2008; originally announced November 2008.

Journal ref: Phys. Rev. B79, 201101(R) (2009)

High pressure behavior of Ga-doped LaMnO_3: a combined X-ray diffraction and optical spectroscopy study

Authors: M. Baldini, L. Malavasi, D. Di Castro, A. Nucara, W. Crichton, M. Mezouar, J. Blasco, P. Postorino

Abstract: The pressure effects on the JT distortion of three representative compounds belonging to the LaMn_1-xGa_xO_3 (x= 0.2, 0.3, 0.4) family was widely investigated by means of X-ray diffraction and Raman spectroscopy. A compound with a fully JT distorted structure (x=0.2), one with regular octahedra (x=0.6) and one in an intermediate configuration (x=0.3) were selected. A pressure induced transitions… ▽ More The pressure effects on the JT distortion of three representative compounds belonging to the LaMn_1-xGa_xO_3 (x= 0.2, 0.3, 0.4) family was widely investigated by means of X-ray diffraction and Raman spectroscopy. A compound with a fully JT distorted structure (x=0.2), one with regular octahedra (x=0.6) and one in an intermediate configuration (x=0.3) were selected. A pressure induced transitions from the orthorhombic Pbnm phase towards structures with higher symmetry were observed in all the samples. Both Raman and X-ray data confirm that the most important structural effect of pressure is that of reducing the octahedral distortion. The appearance of a feature in the lattice parameter behavior connected to a structural instability was also detected, pointing out the key role of the JT distortion in stabilizing the manganite structures. On the other hand, the complete suppression of the JT distortion in the high-pressure phases cannot be claimed. The Raman spectra collected from more distorted compounds (x=0.2, 0.3) reveal clearly the coexistence of domains of distorted and more regular octahedra in a certain pressure range. The first sketch of the Pressure vs. Ga-content phase diagram was drawn. △ Less

Submitted 17 July, 2008; originally announced July 2008.

Comments: LateX v2.6, 9 pages with 10 figures

Evidence for coupling between collective state and phonons in two-dimensional charge-density-wave systems

Authors: M. Lavagnini, M. Baldini, A. Sacchetti, D. Di Castro, B. Delley, R. Monnier, J. -H. Chu, N. Ru, I. R. Fisher, P. Postorino, L. Degiorgi

Abstract: We report on a Raman scattering investigation of the charge-density-wave (CDW), quasi two-dimensional rare-earth tri-tellurides $R$Te$_3$ ($R$= La, Ce, Pr, Nd, Sm, Gd and Dy) at ambient pressure, and of LaTe$_3$ and CeTe$_3$ under externally applied pressure. The observed phonon peaks can be ascribed to the Raman active modes for both the undistorted as well as the distorted lattice in the CDW s… ▽ More We report on a Raman scattering investigation of the charge-density-wave (CDW), quasi two-dimensional rare-earth tri-tellurides $R$Te$_3$ ($R$= La, Ce, Pr, Nd, Sm, Gd and Dy) at ambient pressure, and of LaTe$_3$ and CeTe$_3$ under externally applied pressure. The observed phonon peaks can be ascribed to the Raman active modes for both the undistorted as well as the distorted lattice in the CDW state by means of a first principles calculation. The latter also predicts the Kohn anomaly in the phonon dispersion, driving the CDW transition. The integrated intensity of the two most prominent modes scales as a characteristic power of the CDW-gap amplitude upon compressing the lattice, which provides clear evidence for the tight coupling between the CDW condensate and the vibrational modes. △ Less

Submitted 9 June, 2008; originally announced June 2008.

Journal ref: Phys. Rev. B78, 201101(R) (2008)

On the Lyapunov Exponent of a Multidimensional Stochastic Flow

Authors: M. Baldini

Abstract: Let $X_t$ be a reversible and positive recurrent diffusion in $R^d$ described by \begin{equation}\nonumber X_t=x+σb(t)+\int_0^tm(X_s)\dif s, \end{equation} where the diffusion coefficient $σ$ is a positive-definite matrix and the drift $m$ is a smooth function. Let $X_t(A)$ denote the image of a compact set $A\subset R^d$ under the stochastic flow generated by $X_t$. If the divergence of the dri… ▽ More Let $X_t$ be a reversible and positive recurrent diffusion in $R^d$ described by \begin{equation}\nonumber X_t=x+σb(t)+\int_0^tm(X_s)\dif s, \end{equation} where the diffusion coefficient $σ$ is a positive-definite matrix and the drift $m$ is a smooth function. Let $X_t(A)$ denote the image of a compact set $A\subset R^d$ under the stochastic flow generated by $X_t$. If the divergence of the drift is strictly negative, there exists a set of functions $u$ such that \[\lim_{t\to\infty} \int_{X_t(A)}u(x)\dif x=0\quad{a.s.} \] A characterization of the functions $u$ is provided, as well as lower and upper bounds for the exponential rate of convergence. △ Less

Submitted 22 October, 2006; originally announced October 2006.

Comments: To appear on "Journal of Theoretical Probability"

MSC Class: 60J60;31B05

Raman spectroscopy on cubic and hexagonal SrMnO$_3$

Authors: A. Sacchetti, M. Baldini, P. Postorino, C. Martin, A. Maignan

Abstract: We report on the first optical characterization of both cubic and hexagonal SrMnO$_3$. Room-temperature Raman spectra collected by means of a micro-Raman spectrometer are shown. The spectrum of the cubic compound is characterized by weak and broad bands in agreement with group-theory which predicts no Raman-active phonons for this compound. On the other hand, the spectrum of the hexagonal compou… ▽ More We report on the first optical characterization of both cubic and hexagonal SrMnO$_3$. Room-temperature Raman spectra collected by means of a micro-Raman spectrometer are shown. The spectrum of the cubic compound is characterized by weak and broad bands in agreement with group-theory which predicts no Raman-active phonons for this compound. On the other hand, the spectrum of the hexagonal compound shows six narrow peaks ascribed to one-phonon processes. A complete polarization analysis of the spectra collected from a single crystallite allows us to completely assign the symmetries of the six observed peaks. Atomic displacements for each phonon peaks are also proposed. △ Less

Submitted 19 September, 2005; originally announced September 2005.

Comments: 5 pages, 5 figures, 3 tables, submitted to Journal of Raman Spectroscopy

Journal ref: J Raman Spectrosc 37, 591 (2006)