-
Spatio-temporal isolator in lithium niobate on insulator
Authors:
Hai** Huang,
Armandas Balcytis,
Aditya Dubey,
Andreas Boes,
Thach G. Nguyen,
Guanghui Ren,
Mengxi Tan,
Arnan Mitchell
Abstract:
In this contribution, we simulate, design, and experimentally demonstrate an integrated optical isolator based on spatiotemporal modulation in the thin-film lithium niobate on insulator waveguide platform. We used two cascaded travelling wave phase modulators for spatiotemporal modulation and a ring resonator as a wavelength filter to suppress the sidebands of the reverse propagating light. This e…
▽ More
In this contribution, we simulate, design, and experimentally demonstrate an integrated optical isolator based on spatiotemporal modulation in the thin-film lithium niobate on insulator waveguide platform. We used two cascaded travelling wave phase modulators for spatiotemporal modulation and a ring resonator as a wavelength filter to suppress the sidebands of the reverse propagating light. This enabled us to achieve an isolation of 27 dB. The demonstrated suppression of the reverse propagating light makes such isolators suitable for the integration with III-V laser diodes and Erbium doped gain sections in the thin-film lithium niobate on insulator waveguide platform.
△ Less
Submitted 17 November, 2022;
originally announced November 2022.
-
Recirculating Light Phase Modulator
Authors:
Hai** Huang,
Xu Han,
Armandas Balčytis,
Aditya Dubey,
Andreas Boes,
Thach G. Nguyen,
Guanghui Ren,
Mengxi Tan,
Yonghui Tian,
Arnan Mitchell
Abstract:
High efficiency and a compact footprint are desired properties for electro-optic modulators. In this paper, we propose, theoretically investigate and experimentally demonstrate a recirculating phase modulator, which increases the modulation efficiency by modulating the optical field several times in a non-resonant waveguide structure. The 'recycling' of light is achieved by loo** the optical pat…
▽ More
High efficiency and a compact footprint are desired properties for electro-optic modulators. In this paper, we propose, theoretically investigate and experimentally demonstrate a recirculating phase modulator, which increases the modulation efficiency by modulating the optical field several times in a non-resonant waveguide structure. The 'recycling' of light is achieved by loo** the optical path that exits the phase modulator back and coupling it to a higher order waveguide mode, which then repeats its passage through the phase modulator. By loo** the light back twice, we were able to demonstrate a recirculating phase modulator that requires nine times lower power to generate the same modulation index of a single pass phase modulator. This approach of modulation efficiency enhancement is promising for the design of advanced tunable electro optical frequency comb generators and other electro-optical devices with defined operational frequency bandwidths.
△ Less
Submitted 28 July, 2022;
originally announced July 2022.
-
Synthetic dimension band structures on a Si CMOS photonic platform
Authors:
Armandas Balčytis,
Tomoki Ozawa,
Yasutomo Ota,
Satoshi Iwamoto,
Jun Maeda,
Toshihiko Baba
Abstract:
Synthetic dimensions, which simulate spatial coordinates using non-spatial degrees of freedom, are drawing interest in topological science and other fields for modelling higher-dimensional phenomena on simple structures. We present the first realization of a synthetic frequency dimension on a silicon ring resonator photonic device fabricated using a CMOS process. We confirm that its coupled modes…
▽ More
Synthetic dimensions, which simulate spatial coordinates using non-spatial degrees of freedom, are drawing interest in topological science and other fields for modelling higher-dimensional phenomena on simple structures. We present the first realization of a synthetic frequency dimension on a silicon ring resonator photonic device fabricated using a CMOS process. We confirm that its coupled modes correspond to a 1D tight-binding model through acquisition of up to 280 GHz bandwidth optical frequency comb-like spectra, and by measuring the first synthetic band structures on an integrated device. Furthermore, we realized two types of gauge potentials along the frequency dimension, and probed their effects through the associated band structures. An electric field analogue was produced via modulation detuning, whereas effective magnetic fields were induced using synchronized nearest- and second-nearest-neighbor coupling. Creation of coupled mode lattices and two effective forces on a monolithic Si CMOS device represents a key step towards wider adoption of topological principles.
△ Less
Submitted 28 May, 2021;
originally announced May 2021.
-
Lithography-free Kirchhoff's Metasurfaces
Authors:
Takuhiro Kumagai,
Naoki To,
Armandas Balcytis,
Gediminas Seniutinas,
Saulius Juodkazis,
Yoshiaki Nishijima
Abstract:
Lithography-free metasurfaces composed of a nano-layered stack of materials are attractive not only due to their optical properties but also by virtue of fabrication simplicity and cost reduction of devices based on such structures. We demonstrate a multi-layer metasurface with engineered electromagnetic absorption in the mid-infrared (MIR) wavelength range. Characterisation of thin SiO$_2$ and Si…
▽ More
Lithography-free metasurfaces composed of a nano-layered stack of materials are attractive not only due to their optical properties but also by virtue of fabrication simplicity and cost reduction of devices based on such structures. We demonstrate a multi-layer metasurface with engineered electromagnetic absorption in the mid-infrared (MIR) wavelength range. Characterisation of thin SiO$_2$ and Si films sandwiched between two Au layers by way of experimental absorption and thermal radiation measurements as well as finite difference time domain (FDTD) numerical simulations is presented. Comparison of experimental and simulation data of optical properties of multilayer metasurfaces show guidelines for the absorber/emitter applications.
△ Less
Submitted 23 March, 2020;
originally announced March 2020.
-
Nanoscale optical and structural characterisation of silk
Authors:
Meguya Ryu,
Reo Honda,
Adrian Cernescu,
Arturas Vailionis,
Armandas Balcytis,
Jitraporn Vongsvivut,
**g-Liang Li,
Denver P. Linklater,
Elena P. Ivanova,
Vygantas Mizeikis,
Mark J. Tobin,
Junko Morikawa,
Saulius Juodkazis
Abstract:
Background: Nanoscale composition of silk defining its unique properties via a hierarchical structural anisotropy has to be analysed at the highest spatial resolution of tens-of-nanometers corresponding to the size of fibrils made of b-sheets, which are the crystalline building blocks of silk. Results: Nanoscale optical and structural properties of silk have been measured from 100-nm thick longitu…
▽ More
Background: Nanoscale composition of silk defining its unique properties via a hierarchical structural anisotropy has to be analysed at the highest spatial resolution of tens-of-nanometers corresponding to the size of fibrils made of b-sheets, which are the crystalline building blocks of silk. Results: Nanoscale optical and structural properties of silk have been measured from 100-nm thick longitudinal slices of silk fibers with ~10 nm resolution, the highest so far. Optical sub-wavelength resolution in hyperspectral map** of absorbance and molecular orientation were carried out for comparison at IR wavelengths 2-10 micrometers using synchrotron radiation. Conclusion: Reliable distinction of transmission changes by only 1-2% due to anisotropy of amide bands was obtained from nano-thin slices of silk.
△ Less
Submitted 7 February, 2019;
originally announced February 2019.
-
Paracetamol Micro-Structure Analysis by Optical Map**
Authors:
Reo Honda,
Meguya Ryu,
Armandas Balcytis,
Jitraporn Vongsvivut,
Mark J. Tobin,
Saulius Juodkazis,
Junko Morikawa
Abstract:
Domain structure of paracetamol -- popular antipyretic analgesic -- was investigated by infrared (IR) spectroscopy using synchrotron radiation. Absorbance and retardance maps reveal molecular orientation inside the micro-domains of the paracetamol form II which has a better water solubility and compressibility compared to the commercially used forms I. The developed method of analysis representing…
▽ More
Domain structure of paracetamol -- popular antipyretic analgesic -- was investigated by infrared (IR) spectroscopy using synchrotron radiation. Absorbance and retardance maps reveal molecular orientation inside the micro-domains of the paracetamol form II which has a better water solubility and compressibility compared to the commercially used forms I. The developed method of analysis representing orientation of optical slow(fast)-axis is compared with azimuthal orientation of the absorbance at several specific IR bands using vector maps. High brightness of synchrotron radiation and hyper-spectral map** of structural domains in paracetamol clearly reveals the domain boundaries and can potentially be used to observe \emph{in situ} intra-phase transformations of paracetamol forms-I, II, III and melting, which are important for making medical tablets and powders by an industrial process.
△ Less
Submitted 24 December, 2018;
originally announced January 2019.
-
Kirchhoff's metasurfaces
Authors:
Yoshiaki Nishijima,
Armandas Balcytis,
Shin Naganuma,
Gediminas Seniutinas,
Saulius Juodkazis
Abstract:
Thermo-optical properties of the nanodisc and metal hole array plasmonic perfect absorber (PPA) metasurfaces were designed and characterised at midinfrared wavelengths. Both, light emitter and detector systems are highly thought after for the future sensor networks in the internet-of-things for various spectral domains. Reciprocity of the absorbance and emittance is shown experimentally, i.e., the…
▽ More
Thermo-optical properties of the nanodisc and metal hole array plasmonic perfect absorber (PPA) metasurfaces were designed and characterised at midinfrared wavelengths. Both, light emitter and detector systems are highly thought after for the future sensor networks in the internet-of-things for various spectral domains. Reciprocity of the absorbance and emittance is shown experimentally, i.e., the PPAs are following Kirchhoff's law where the patterns exhibiting a strong optical absorption were found enhanced thermal radiation. Design principles and scaling for photo-thermal conversion are discussed. The highest efficiency of light-to-heat and heat-to-radiation were obtained for the Au-Si-Au structures.
△ Less
Submitted 12 May, 2018;
originally announced May 2018.
-
Micro-thermocouple on nano-membrane: thermometer for nanoscale measurements
Authors:
Armandas Balcytis,
Meguya Ryu,
Saulius Juodkazis,
Junko Morikawa
Abstract:
A thermocouple of Au-Ni with only 2.5-micrometers-wide electrodes on a 30-nm-thick Si3N4 membrane was fabricated by a simple low-resolution electron beam lithography and lift off procedure. The thermocouple is shown to be sensitive to heat generated by laser as well as an electron beam. Nano-thin membrane was used to reach a high spatial resolution of energy deposition and to realise a heat source…
▽ More
A thermocouple of Au-Ni with only 2.5-micrometers-wide electrodes on a 30-nm-thick Si3N4 membrane was fabricated by a simple low-resolution electron beam lithography and lift off procedure. The thermocouple is shown to be sensitive to heat generated by laser as well as an electron beam. Nano-thin membrane was used to reach a high spatial resolution of energy deposition and to realise a heat source of sub-1 micrometer diameter. This was achieved due to a limited generation of secondary electrons, which increase a lateral energy deposition. A low thermal capacitance of the fabricated devices is useful for the real time monitoring of small and fast temperature changes, e.g., due to convection, and can be detected through an optical and mechanical barrier of the nano-thin membrane. Temperature changes up to ~2x10^5 K/s can be measured at 10 kHz rate. A simultaneous down-sizing of both, the heat detector and heat source strongly required for creation of thermal microscopy is demonstrated. Peculiarities of Seebeck constant (thermopower) dependence on electron injection into thermocouple are discussed. Modeling of thermal flows on a nano-membrane with presence of a micro-thermocouple was carried out to compare with experimentally measured temporal response.
△ Less
Submitted 8 April, 2018;
originally announced April 2018.
-
Chemically non-perturbing SERS detection of catalytic reaction with black silicon
Authors:
E. Mitsai,
A. Kuchmizhak,
E. Pustovalov,
A. Sergeev,
A. Mironenko,
S. Bratskaya,
D. P. Linklater,
A. Balcytis,
E. Ivanova,
S. Juodkazis
Abstract:
All-dielectric resonant micro- and nano-structures made of the high-index dielectrics recently emerge as a promising SERS platform which can complement or potentially replace the metal-based counterparts in routine sensing measurements. These unique structures combine the highly-tunable optical response and high field enhancement with the non-invasiveness, i.e., chemically non-perturbing the analy…
▽ More
All-dielectric resonant micro- and nano-structures made of the high-index dielectrics recently emerge as a promising SERS platform which can complement or potentially replace the metal-based counterparts in routine sensing measurements. These unique structures combine the highly-tunable optical response and high field enhancement with the non-invasiveness, i.e., chemically non-perturbing the analyte, simple chemical modification and recyclability. Meanwhile, the commercially competitive fabrication technologies for mass production of such structures are still missing. Here, we attest a chemically inert black silicon (b-Si) substrate consisting of randomly-arranged spiky Mie resonators for a true non-invasive SERS identification of the molecular fingerprints at low concentrations. Based on comparative in-situ SERS tracking of the para-aminothiophenol -to-4,4` dimercaptoazobenzene catalytic conversion on the bare and metal-coated b-Si, we justify applicability of the metal-free b-Si for the ultra-sensitive non-invasive SERS detection at concentration level as low as 10^-6 M. We perform finite-difference time-domain calculations to reveal the electromagnetic enhancement provided by an isolated spiky Si resonator in the visible spectral range. Additional comparative SERS studies of the PATP-to-DMAB conversion performed with a chemically active bare black copper oxide as well as SERS detection of the slow daylight-driven PATP-to-DAMP catalytic conversion in the aqueous methanol solution loaded with colloidal silver nanoparticles confirm the non-invasive SERS performance of the all-dielectric crystalline b-Si substrate. Proposed SERS substrate can be fabricated using simple scalable technology of plasma etching amenable on large substrate areas making such inexpensive all-dielectric substrates promising for routine SERS applications, where the non-invasiveness is of mandatory importance.
△ Less
Submitted 27 February, 2018;
originally announced February 2018.
-
Nanoscale chemical map** of laser-solubilized silk
Authors:
Meguya Ryu,
Hanae Kobayashi,
Armandas Balcytis,
Xuewen Wang,
Jitraporn Vongsvivut,
**gliang Li,
Norio Urayama,
Vygantas Mizeikis,
Mark Tobin,
Saulius Juodkazis,
Junko Morikawa
Abstract:
A water soluble amorphous form of silk was made by ultra-short laser pulse irradiation and detected by nanoscale IR map**. An optical absorption-induced nanoscale surface expansion was probed to yield the spectral response of silk at IR molecular fingerprinting wavelengths with a high ~20 nm spatial resolution defined by the tip of the probe. Silk microtomed sections of 1-5 micrometers in thickn…
▽ More
A water soluble amorphous form of silk was made by ultra-short laser pulse irradiation and detected by nanoscale IR map**. An optical absorption-induced nanoscale surface expansion was probed to yield the spectral response of silk at IR molecular fingerprinting wavelengths with a high ~20 nm spatial resolution defined by the tip of the probe. Silk microtomed sections of 1-5 micrometers in thickness were prepared for nanoscale spectroscopy and a laser was used to induce amorphisation. Comparison of silk absorbance measurements carried out by table-top and synchrotron Fourier transform IR spectroscopy proved that chemical imaging obtained at high spatial resolution and specificity (able to discriminate between amorphous and crystalline silk) is reliably achieved by nanoscale IR. A nanoscale material characterization using synchrotron IR radiation is discussed.
△ Less
Submitted 25 August, 2017;
originally announced September 2017.
-
Photoacoustic signal enhancements from gold nano-colloidal suspensions excited by a pair of time-delayed femtosecond pulses
Authors:
Frances Camille P. Masim,
Wei-Hung Hsu,
Hao-Li Liu,
Tetsu Yonezawa,
Armandas Balcytis,
Saulius Juodkazis,
Koji Hatanaka
Abstract:
Photoacoustic signal enhancements were observed with a pair of time-delayed femtosecond pulses upon excitation of gold nanosphere colloidal suspension. A systematic experimental investigation of photoacoustic intensity within the delay time, t = 0 to 15 ns, was carried out. The results revealed a significant enhancement factor of ~2 when the pre-pulse energy is 20-30% of the total energy. Pre-puls…
▽ More
Photoacoustic signal enhancements were observed with a pair of time-delayed femtosecond pulses upon excitation of gold nanosphere colloidal suspension. A systematic experimental investigation of photoacoustic intensity within the delay time, t = 0 to 15 ns, was carried out. The results revealed a significant enhancement factor of ~2 when the pre-pulse energy is 20-30% of the total energy. Pre-pulse and main pulse energy ratios, E(1)p-pol. :E(2)s-pol. were varied to determine the optimal ratio that yields to maximum photoacoustic signal enhancement. This enhancement was ascribed to the initial stage of thermalization and bubble generation in the nanosecond time scale. Pre-pulse scattering intensity measurements and numerical finite-difference time-domain calculations were performed to reveal dynamics and light field enchancement, respectively.
△ Less
Submitted 25 July, 2017;
originally announced July 2017.
-
Polarisation of THz synchrotron radiation: from its measurement to control
Authors:
Meguya Ryu,
Denver Linklater,
William Hart,
Armandas Balcytis,
Edvinas Skliutas,
Mangirdas Malinauskas,
Dominique Appadoo,
Yaw-Ren Eugene Tan,
Junko Morikawa,
Saulius Juodkazis
Abstract:
Polarisation analysis of synchrotron THz radiation was carried out with a standard stretched polyethylene polariser and revealed that the linearly polarised (horizontal) component contributes up to 22 +/- 5% to the circular polarised synchrotron emission extracted by a gold-coated mirror with a horizontal slit inserted near a bending magnet edge. Comparison with theoretical predictions shows a qua…
▽ More
Polarisation analysis of synchrotron THz radiation was carried out with a standard stretched polyethylene polariser and revealed that the linearly polarised (horizontal) component contributes up to 22 +/- 5% to the circular polarised synchrotron emission extracted by a gold-coated mirror with a horizontal slit inserted near a bending magnet edge. Comparison with theoretical predictions shows a qualitative match with dominance of the edge radiation. Grid polarisers 3D-printed out of commercial acrilic resin were tested for the polariser function and showed spectral regions where the dichroic ratio DR > 1 and < 1 implying importance of molecular and/or stress induced anisotropy. Metal-coated 3D-printed THz optical elements can find a range of applications in intensity and polarisation control of THz beams.
△ Less
Submitted 1 July, 2017;
originally announced July 2017.
-
Optical readout of hydrogen storage in films of Au and Pd
Authors:
Yoshiaki Nishijima,
Shogo Shimizu,
Keisuke Kurihara,
Yoshikazu Hashimoto,
Hajime Takahashi,
Armandas Balcytis,
Gediminas Seniutinas,
Shinji Okazaki,
Jurga Juodkazyte,
Takeshi Iwasa,
Tetsuya Taketsugu,
Yoriko Tominaga,
Saulius Juodkazis
Abstract:
For hydrogen sensor and storage applications, films of Au and Pd were (i) co-sputtered at different rates or (ii) deposited in a sequential layer-by-layer fashion on a cover glass. Peculiarities of hydrogen uptake and release were optically monitored using 1.3 micrometers wavelength light. Increase of optical transmission was observed for hydrogenated Pd-rich films of 10-30 nm thickness. Up to a t…
▽ More
For hydrogen sensor and storage applications, films of Au and Pd were (i) co-sputtered at different rates or (ii) deposited in a sequential layer-by-layer fashion on a cover glass. Peculiarities of hydrogen uptake and release were optically monitored using 1.3 micrometers wavelength light. Increase of optical transmission was observed for hydrogenated Pd-rich films of 10-30 nm thickness. Up to a three times slower hydrogen release took place as compared with the hydrogen uptake. Composition ratio of Au:Pd and thermal treatment of films provided control over the optical extinction changes and hydrogen uptake/release time constants. Higher uptake and release rates were observed in the annealed Au:Pd films as compared to those deposited at room temperature and were faster for the Au-richer films. Three main parameters relevant for sensors: sensitivity, selectivity, stability (reproducibility) are discussed together with the hydrogenation mechanism in Au:Pd alloys.
△ Less
Submitted 17 June, 2017;
originally announced June 2017.
-
Orientational Map** Augmented Sub-Wavelength Hyper-Spectral Imaging of Silk
Authors:
Meguya Ryu,
Armandas Balcytis,
Xuewen Wang,
Jitraporn Vongsvivut,
Yuta Hikima,
**gliang Li,
Mark J. Tobin,
Saulius Juodkazis,
Junko Morikawa
Abstract:
Molecular alignment underpins optical, mechanical, and thermal properties of materials, however, its direct measurement from volumes with micrometer dimensions is not accessible, especially, for structurally complex bio-materials. How the molecular alignment is linked to extraordinary properties of silk and its amorphous-crystalline composition has to be accessed by a direct measurement from a sin…
▽ More
Molecular alignment underpins optical, mechanical, and thermal properties of materials, however, its direct measurement from volumes with micrometer dimensions is not accessible, especially, for structurally complex bio-materials. How the molecular alignment is linked to extraordinary properties of silk and its amorphous-crystalline composition has to be accessed by a direct measurement from a single silk fiber. Here, we show orientation map** of the internal silk fiber structure via polarisation-dependent IR absorbance at high spatial resolution of 4.2 micrometers and 1.9 micrometers in a hyper-spectral IR imaging by attenuated total reflection using synchrotron radiation in the spectral fingerprint region around 6 micrometers wavelength. Free-standing longitudinal micro-slices of silk fibers, thinner than the fiber cross section, were prepared by microtome for the four polarisation method to directly measure the orientational sensitivity of absorbance in the molecular fingerprint spectral window of the amide bands of b-sheets and amorphous polypeptides of silk. Flat lateral micro-slices of silk eliminates shape related artefact in determination of absorbance anisotropy and order parameters of the amide bands.
△ Less
Submitted 5 June, 2017;
originally announced June 2017.
-
Trap** ultracold atoms at 100 nm from a chip surface in a 0.7-micrometer-period magnetic lattice
Authors:
Yibo Wang,
Tien Tran,
Prince Surendran,
Ivan Herrera,
Armandas Balcytis,
Dennis Nissen,
Manfred Albrecht,
Andrei Sidorov,
Peter Hannaford
Abstract:
We report the trap** of ultracold 87Rb atoms in a 0.7 micron-period 2D triangular magnetic lattice on an atom chip. The magnetic lattice is created by a lithographically patterned magnetic Co/Pd multilayer film plus bias fields. Rubidium atoms in the F=1, mF=-1 low-field seeking state are trapped at estimated distances down to about 100 nm from the chip surface and with calculated mean trap**…
▽ More
We report the trap** of ultracold 87Rb atoms in a 0.7 micron-period 2D triangular magnetic lattice on an atom chip. The magnetic lattice is created by a lithographically patterned magnetic Co/Pd multilayer film plus bias fields. Rubidium atoms in the F=1, mF=-1 low-field seeking state are trapped at estimated distances down to about 100 nm from the chip surface and with calculated mean trap** frequencies as high as 800 kHz. The measured lifetimes of the atoms trapped in the magnetic lattice are in the range 0.4 - 1.7 ms, depending on distance from the chip surface. Model calculations suggest the trap lifetimes are currently limited mainly by losses due to surface-induced thermal evaporation following loading of the atoms from the Z-wire trap into the very tight magnetic lattice traps, rather than by fundamental loss processes such as surface interactions, three-body recombination or spin flips due to Johnson magnetic noise. The trap** of atoms in a 0.7 micrometer-period magnetic lattice represents a significant step towards using magnetic lattices for quantum tunneling experiments and to simulate condensed matter and many-body phenomena in nontrivial lattice geometries.
△ Less
Submitted 9 August, 2017; v1 submitted 25 May, 2017;
originally announced May 2017.
-
Laser structuring for control of coupling between THz light and phonon modes
Authors:
X. W. Wang,
G. Seniutinas,
A. Balcytis,
I. Kasalynas,
V. Jakstas,
V. Janonis,
R. Venckevicius,
R. Buividas,
D. Appadoo,
G. Valusis,
S. Juodkazis
Abstract:
Modification of surface and volume of sapphire is shown to affect reflected and transmitted light at THz spectral range. Structural modifications were made using ultra-short 230 fs laser pulses at 1030 nm and 257.5 nm wavelengths forming surface ripples of ~250 nm and 60 nm period, respectively. Softening of the transverse optical phonon TO1 mode due to disorder was the most pronounced in reflecti…
▽ More
Modification of surface and volume of sapphire is shown to affect reflected and transmitted light at THz spectral range. Structural modifications were made using ultra-short 230 fs laser pulses at 1030 nm and 257.5 nm wavelengths forming surface ripples of ~250 nm and 60 nm period, respectively. Softening of the transverse optical phonon TO1 mode due to disorder was the most pronounced in reflection from laser ablated surface. It is shown that sub-surface periodic patterns of laser damage sites have also modified reflection spectrum due to coupling of THz radiation with phonons. Application potential of laser structuring and disordering for phononic engineering is discussed.
△ Less
Submitted 14 May, 2016;
originally announced May 2016.
-
Efficient X-ray generation from gold colloidal solutions
Authors:
Koji Hatanaka,
Matteo Porta,
Frances Camille P. Masim,
Wei-Hung Hsu,
Mai Thanh Nguyen,
Tetsu Yonezawa,
Armandas Balcytis,
Saulius Juodkazis
Abstract:
Hard X-ray generation for Au nanoparticle dispersion was systematically investigated for different particle diameters ranging from 10 to 100 nm with a narrow size distribution of +/- 2%. Scaling law of X-ray generation is close to a 6-photon process before the onset of saturation for excitation by 45 fs laser pulses with central wavelength of 800 nm. This is consistent with bulk plasmon excitation…
▽ More
Hard X-ray generation for Au nanoparticle dispersion was systematically investigated for different particle diameters ranging from 10 to 100 nm with a narrow size distribution of +/- 2%. Scaling law of X-ray generation is close to a 6-photon process before the onset of saturation for excitation by 45 fs laser pulses with central wavelength of 800 nm. This is consistent with bulk plasmon excitation at wavelength ~ 138 nm. The longitudinal E-field component due to nanoparticle focusing is responsible for the excitation of the longitudinal bulk plasmon. The proposed analysis also explains X-ray emission from water breakdown via an electron solvation mechanism at ~6.2 eV. The most efficient emission of X-rays was observed for 40 +/- 10 nm diameter nanoparticles which also had the strongest UV extinction. X-ray emission was the most efficient when induced by pre-chirped 370 +/- 20 fs laser pulses and exhibited the highest intensity at a negative chirp.
△ Less
Submitted 26 April, 2016;
originally announced April 2016.
-
Au-Ag-Cu nano-alloys: tailoring of permittivity
Authors:
Yoshikazu Hashimoto,
Gediminas Seniutinas,
Armandas Balcytis,
Saulius Juodkazis,
Yoshiaki Nishijima
Abstract:
Precious metal alloys enables new possibilities to tailor materials for specific optical functions. Here we present a systematic study of the effects of a nanoscale alloying on the permittivity of Au-Ag-Cu metals at 38 different atomic mixing ratios. The permittivity was measured and analyzed numerically by applying the Drude model. X-ray diffraction (XRD) revealed the face centered cubic lattice…
▽ More
Precious metal alloys enables new possibilities to tailor materials for specific optical functions. Here we present a systematic study of the effects of a nanoscale alloying on the permittivity of Au-Ag-Cu metals at 38 different atomic mixing ratios. The permittivity was measured and analyzed numerically by applying the Drude model. X-ray diffraction (XRD) revealed the face centered cubic lattice of the alloys. Both, optical spectra and XRD results point towards an equivalent composition-dependent electron scattering behavior. Correlation between the fundamental structural parameters of alloys and the resulting optical properties is elucidated. Plasmonic properties of the Au-Ag-Cu alloy nanoparticles were investigated by numerical simulations. Guidelines for designing plasmonic response of nano- structures and their patterns are presented from the material science perspective.
△ Less
Submitted 11 April, 2016;
originally announced April 2016.
-
UV-photoelectric effect for augmented contrast and resolution in electron microscopy
Authors:
Gediminas Seniutinas,
Armandas Balcytis,
Saulius Juodkazis
Abstract:
A new tool providing material contrast control in scanning electron microscopy (SEM) is demonstrated. The approach is based on deep-UV illumination during SEM imaging and delivers a novel material based contrast as well as higher resolution due to the photoelectric effect. Electrons liberated from illuminated sample surface contribute to the imaging which can be carried out at a faster acquisition…
▽ More
A new tool providing material contrast control in scanning electron microscopy (SEM) is demonstrated. The approach is based on deep-UV illumination during SEM imaging and delivers a novel material based contrast as well as higher resolution due to the photoelectric effect. Electrons liberated from illuminated sample surface contribute to the imaging which can be carried out at a faster acquisition rate, provide material selective contrast, reduce distortions caused by surface charging, and can substitute metal coating in SEM. These features provide high fidelity SEM imaging and are expected to significantly improve the performance of electron beam instruments as well as to open new opportunities for imaging and characterization of materials at the nanoscale.
△ Less
Submitted 3 April, 2016;
originally announced April 2016.
-
Percolation threshold gold films on columnar coatings: characterisation for SERS applications
Authors:
Armandas Balcytis,
Tomas Tolenis,
Xuewen Wang,
Gediminas Seniutinas,
Ramutis Drazdys,
Paul R. Stoddart,
Saulius Juodkazis
Abstract:
Percolation of gold films of ~15 nm thickness was controlled to achieve the largest openings during Au deposition. Gold was evaporated on 300-nm-thick films of nanostructured porous and columnar SiO2, TiO2 and MgF2 which were deposited by controlling the angle, rotation speed during film formation and ambient pressure. The gold films were tested for SERS performance using thiophenol reporter molec…
▽ More
Percolation of gold films of ~15 nm thickness was controlled to achieve the largest openings during Au deposition. Gold was evaporated on 300-nm-thick films of nanostructured porous and columnar SiO2, TiO2 and MgF2 which were deposited by controlling the angle, rotation speed during film formation and ambient pressure. The gold films were tested for SERS performance using thiophenol reporter molecules which form a stable self-assembled monolayer on gold. The phase retardation of these SERS substrates was up to 5% for wavelengths in the visible spectral range, as measured by Stokes polarimetry. The SERS intensity on gold percolation films can reach 10^3 counts/(mW.s) for tight focusing in air, while back-side excitation through the substrate has shown the presence of an additional SERS enhancement via the Fresnel near-field mechanism.
△ Less
Submitted 27 March, 2016;
originally announced March 2016.
-
Unconventional Magnetism in a Nitrogen-Based Analogue of Cupric Oxide
Authors:
A. Zorko,
P. Jeglič,
A. Potočnik,
D. Arčon,
A. Balčytis,
Z. Jagličić,
X. Liu,
A. L. Tchougréeff,
R. Dronskowski
Abstract:
We have investigated the magnetic properties of CuNCN, the first nitrogen-based analogue of cupric oxide, CuO. Our muon spin relaxation, nuclear magnetic resonance and electron spin resonance studies reveal that classical magnetic ordering is absent down to lowest temperatures. However, large enhancement of spin correlations and unexpected inhomogeneous magnetism have been observed below 80 K. We…
▽ More
We have investigated the magnetic properties of CuNCN, the first nitrogen-based analogue of cupric oxide, CuO. Our muon spin relaxation, nuclear magnetic resonance and electron spin resonance studies reveal that classical magnetic ordering is absent down to lowest temperatures. However, large enhancement of spin correlations and unexpected inhomogeneous magnetism have been observed below 80 K. We attribute this to a peculiar fragility of the electronic state against weak perturbations due to geometrical frustration, which selects between competing spin-liquid and more conventional frozen states.
△ Less
Submitted 30 June, 2011; v1 submitted 9 May, 2011;
originally announced May 2011.
