-
Assessing Effectiveness of Pulsed Input on Mixing Characteristics of Non-Newtonian fluids in T-shaped Channels
Authors:
Anirban Roy,
Avinash Kumar,
Chirodeep Bakli,
Gargi Das
Abstract:
Mixing of reagents in microfluidics is necessary for various applications however, due to the laminar nature of flows, efficient mixing in a small span of length and time becomes difficult. The analysis of mixing of non-Newtonian fluids is critical as they are commonly encountered in practical applications. Towards this, we investigated an effective way for mixing of non-Newtonian fluids using pul…
▽ More
Mixing of reagents in microfluidics is necessary for various applications however, due to the laminar nature of flows, efficient mixing in a small span of length and time becomes difficult. The analysis of mixing of non-Newtonian fluids is critical as they are commonly encountered in practical applications. Towards this, we investigated an effective way for mixing of non-Newtonian fluids using pulsatile velocity inlet conditions. In the present study, the non-Newtonian fluid is modelled using the power law model with varying fluid rheology from shear thickening to shear thinning. For enhancing the mixing, pulsed velocity inlet condition is applied with varying phase angle and frequency and compared with constant velocity inlet condition. We demonstrated enhanced mixing using pulsing velocity inlet condition and achieved a maximum mixing of 97.6% using pulsed input velocity with a phase difference of 180° and considering a frequency of 5 Hz for the case of shear-thinning fluid (n=0.6). For the same condition, the mixing index is 89.1% and 85.2% for Newtonian and shear thickening fluid (n=1.4), respectively. The present study will be helpful in designing micromixers for mixing non-Newtonian fluid effectively in a small span of length and time.
△ Less
Submitted 31 August, 2022;
originally announced August 2022.
-
Combined effect of Fluid Rheology and Surface Modification on Eletrokinetic Energy Generation through Finite Length Microchannel
Authors:
Aditya Patwari,
Avinash Kumar,
Chirodeep Bakli,
Suman Chakraborty
Abstract:
Electrokinetic energy conversion provides a scheme for energy harvesting and storage for on-chip applications. However, the major drawback of electrokinetic energy conversion is its low conversion efficiency. Researchers are in a quest to find ways to improve this efficiency. With the same motive, we investigated the generation of streaming potential by applying surface modification and employing…
▽ More
Electrokinetic energy conversion provides a scheme for energy harvesting and storage for on-chip applications. However, the major drawback of electrokinetic energy conversion is its low conversion efficiency. Researchers are in a quest to find ways to improve this efficiency. With the same motive, we investigated the generation of streaming potential by applying surface modification and employing a non-Newtonian fluid to flow through the microchannel under constant pressure difference across its ends. Shear-thickening liquids tend to lessen electrokinetic effects, whereas shear-thinning liquids favour them. Also, having superhydrophobic surfaces improve the magnitude of generated streaming potential. We examine the combined effect of fluid rheology and surface modification on electrokinetic energy generation. We have learned intriguing insights about using non-Newtonian fluid in hydrophobic microchannels as an outcome of our combined research. Hydrophobic surfaces do not enhance the efficiency for a fluid with below a power law index of 0.7. The findings of this research can be used towards the selection of fluid-substrate combination that will optimize electrokinetic power generation efficiency.
△ Less
Submitted 31 August, 2022;
originally announced August 2022.
-
Liquid-phase reinforced Metal matrix (LMM) composite with non-intuitive properties
Authors:
Varinder Pal,
Rakesh Das,
Rushikesh Ambekhar,
Avinash Kumar,
Jitesh Vasavada,
Banty Kumar,
Sujoy Kumar Kar,
Suman Sarkar,
Mithun Palit,
Ajit K. Roy,
Manas Paliwal,
Krishanu Biswas,
Sanjit Bhoumik,
Sushil Mishra,
Chirodeep Bakli,
Chandra Shekhar Tiwary
Abstract:
Over the ages, efforts have been made to use composite design to reinforce metals and alloys in order to increase their strength and modulus. On the other hand, nature herself improves the strength, ductility, stiffness and toughness of materials by strengthening them with liquids having zero strength/modulus. Here, emulating nature, efforts have been made to develop a new class of tin based alloy…
▽ More
Over the ages, efforts have been made to use composite design to reinforce metals and alloys in order to increase their strength and modulus. On the other hand, nature herself improves the strength, ductility, stiffness and toughness of materials by strengthening them with liquids having zero strength/modulus. Here, emulating nature, efforts have been made to develop a new class of tin based alloy/composite with liquid metal reinforcement (LMM). Based on thermodynamic calculations, a composition has been designed such that on melting and casting it forms a solid metal (tin solid solution) and the eutectic mixture remains in liquid form at room temperature. The composite structure named as LMM shows multifold improvement in hardness, strength, ductility, toughness and wear resistance as compared to conventional solder alloys. A Finite Element Method (FEM) based simulation shows strain distribution in the composite which results in the unique behavior. The LMM also shows a negative coefficient of thermal expansion which is further verified using in-situ microscopy and thermodynamic calculations.
△ Less
Submitted 8 February, 2020;
originally announced February 2020.
-
On the Comparability of Chemical Structure and Roughness of Nanochannels in Altering Fluid Slippage
Authors:
Chinmay Anand Misra,
Chirodeep Bakli
Abstract:
Interfacial hydrodynamic slippage of water depends on both on surface chemistry and roughness. This study tries to connect the effect of chemical property and the physical structure of the surface on the interfacial slippage of water. By performing molecular dynamics simulations (MDS) of Couette flow of water molecules over a reduced Lennard-Jones (LJ) surface, the velocity profile is obtained and…
▽ More
Interfacial hydrodynamic slippage of water depends on both on surface chemistry and roughness. This study tries to connect the effect of chemical property and the physical structure of the surface on the interfacial slippage of water. By performing molecular dynamics simulations (MDS) of Couette flow of water molecules over a reduced Lennard-Jones (LJ) surface, the velocity profile is obtained and extrapolated to get the slip lengths. The slip lengths are measured for various surface-fluid interactions. These interactions are varied by changing the wettability of the surface (characterized by the static contact angle) and its roughness. The slip length variation with the static contact angle as $(1+cosθ)^{-2}$ is observed. However, it is also observed that the presence of surface roughness always reduces the slip length and it is proposed that the slip length varies with non-dimensionalized average surface roughness as $(1+α^*)^{-2}$ . Thus a relation between the chemical wettability and the physical roughness is established and their coupled interactions modifying slip length is probed.
△ Less
Submitted 9 May, 2016;
originally announced May 2016.
-
Fractional Separation of Polymers in Nanochannels: Combined Influence of Wettability and Structure
Authors:
Sree Hari P D,
Chirodeep Bakli,
Suman Chakraborty
Abstract:
Trap** macromolecules in nanopits finds multifarious applications in polymer separation, filtering biomolecules etc. However, tuning the locomotion of polymers in channels of nanoscopic dimensions is greatly restricted by the comparative advective and diffusive components of velocities. Using the polymer affinity toward the solvent and the wall, and the polymer structure, a mechanism is proposed…
▽ More
Trap** macromolecules in nanopits finds multifarious applications in polymer separation, filtering biomolecules etc. However, tuning the locomotion of polymers in channels of nanoscopic dimensions is greatly restricted by the comparative advective and diffusive components of velocities. Using the polymer affinity toward the solvent and the wall, and the polymer structure, a mechanism is proposed to induce selective trap** of polymers. Similar to fractional distillation of hydrocarbons based on molecular weight, a technique of fractional segregation, depending on the channel wettability of polymeric chains at different depths in a pit that is located perpendicular to the flow is suggested. Depending on the properties of the polymeric chains and the surface chemistry, the segregation of the polymer at a particular level in the pit can be predicted. This behaviour stems from the difference in polymer structure leading to a competition between wettability based trap** and entropic trap**. The results of this study suggest a novel way of separating biopolymers based on their structure without relying on the channel geometry.
△ Less
Submitted 9 May, 2016;
originally announced May 2016.
-
Electrokinetic Pum** And Energy Conversion At Nanoscales
Authors:
Chirodeep Bakli,
Suman Chakraborty
Abstract:
The integration of the coupling effects of intrinsic wettability and surface charge in a nanochannel can cause non-intuitive behavior in the electrokinetic energy conversion processes. We demonstrate that in a nanofluidic device the energy conversion efficiencies may get amplified with an increase in surface charge density, not perpetually, but only over a narrow regime of low surface charges, and…
▽ More
The integration of the coupling effects of intrinsic wettability and surface charge in a nanochannel can cause non-intuitive behavior in the electrokinetic energy conversion processes. We demonstrate that in a nanofluidic device the energy conversion efficiencies may get amplified with an increase in surface charge density, not perpetually, but only over a narrow regime of low surface charges, and may get significantly attenuated to reach a plateau beyond a threshold surface charging condition. This results from the complex interplay between fluid structuration and ionic transport within a charged interfacial layer. We explain the corresponding findings from our molecular dynamics simulations with the aid of a simple modified continuum based theory. We attribute our findings to the four-way integration of surface charge, interfacial slip, ionic transport, and the water molecule structuration. The consequent complex non-linear nature of the energy transfer characteristics may bear far-ranging scientific and technological implications towards design, synthesis and operation of nano-batteries which can supply power at scales of the range molecular dimensions.
△ Less
Submitted 11 November, 2015; v1 submitted 20 November, 2014;
originally announced November 2014.