-
Saddle avoidance of noise-induced transitions in multiscale systems
Authors:
Reyk Börner,
Ryan Deeley,
Raphael Römer,
Tobias Grafke,
Valerio Lucarini,
Ulrike Feudel
Abstract:
In multistable dynamical systems driven by weak Gaussian noise, transitions between competing states are often assumed to pass via a saddle on the separating basin boundary. Instead, we show that timescale separation can cause saddle avoidance in non-gradient systems. Using toy models from neuroscience and ecology, we study cases where sample transitions deviate strongly from the instanton predict…
▽ More
In multistable dynamical systems driven by weak Gaussian noise, transitions between competing states are often assumed to pass via a saddle on the separating basin boundary. Instead, we show that timescale separation can cause saddle avoidance in non-gradient systems. Using toy models from neuroscience and ecology, we study cases where sample transitions deviate strongly from the instanton predicted by Freidlin-Wentzell theory, even for weak finite noise. We attribute this to a flat quasipotential and present an approach based on the Onsager-Machlup action to aptly predict transition paths.
△ Less
Submitted 11 June, 2024; v1 submitted 16 November, 2023;
originally announced November 2023.
-
Limits to predictability of the asymptotic state of the Atlantic Meridional Overturning Circulation in a conceptual climate model
Authors:
Oliver Mehling,
Reyk Börner,
Valerio Lucarini
Abstract:
Anticipating critical transitions in the Earth system is of great societal relevance, yet there may be intrinsic limitations to their predictability. For instance, from the theory of dynamical systems possessing multiple chaotic attractors, it is known that the asymptotic state depends sensitively on the initial condition in the proximity of a fractal basin boundary. Here, we approach the problem…
▽ More
Anticipating critical transitions in the Earth system is of great societal relevance, yet there may be intrinsic limitations to their predictability. For instance, from the theory of dynamical systems possessing multiple chaotic attractors, it is known that the asymptotic state depends sensitively on the initial condition in the proximity of a fractal basin boundary. Here, we approach the problem of final-state sensitivity of the Atlantic Meridional Overturning Circulation (AMOC) using a conceptual climate model, composed of a slow bistable ocean coupled to a fast chaotic atmosphere. First, we explore the occurrence of long chaotic transients in the monostable regime, which can mask a loss of stability near bifurcations. In the bistable regime, we explicitly construct the chaotic saddle using the edge tracking technique. Quantifying the final-state sensitivity through the maximum Lyapunov exponent and the lifetime of the saddle, we find that the system exhibits a fractal basin boundary with almost full phase space dimension, implying vanishing predictability of the second kind near the basin boundary. Our results demonstrate the usefulness of studying non-attracting chaotic sets in the context of predicting climatic tip** points, and provide guidance for the interpretation of higher-dimensional models such as general circulation models.
△ Less
Submitted 18 December, 2023; v1 submitted 30 August, 2023;
originally announced August 2023.
-
A new twist on PIFE: photoisomerisation-related fluorescence enhancement
Authors:
Evelyn Ploetz,
Benjamin Ambrose,
Anders Barth,
Richard Börner,
Felix Erichson,
Achillefs N. Kapanidis,
Harold D. Kim,
Marcia Levitus,
Timothy M. Lohman,
Abhishek Mazumder,
David S. Rueda,
Fabio D. Steffen,
Thorben Cordes,
Steven W. Magennis,
Eitan Lerner
Abstract:
PIFE was first used as an acronym for protein-induced fluorescence enhancement, which refers to the increase in fluorescence observed upon the interaction of a fluorophore, such as a cyanine, with a protein. This fluorescence enhancement is due to changes in the rate of cis/trans photoisomerisation. It is clear now that this mechanism is generally applicable to interactions with any biomolecule an…
▽ More
PIFE was first used as an acronym for protein-induced fluorescence enhancement, which refers to the increase in fluorescence observed upon the interaction of a fluorophore, such as a cyanine, with a protein. This fluorescence enhancement is due to changes in the rate of cis/trans photoisomerisation. It is clear now that this mechanism is generally applicable to interactions with any biomolecule and, in this review, we propose that PIFE is thereby renamed according to its fundamental working principle as photoisomerisation-related fluorescence enhancement, kee** the PIFE acronym intact. We discuss the photochemistry of cyanine fluorophores, the mechanism of PIFE, its advantages and limitations, and recent approaches to turn PIFE into a quantitative assay. We provide an overview of its current applications to different biomolecules and discuss potential future uses, including the study of protein-protein interactions, protein-ligand interactions and conformational changes in biomolecules.
△ Less
Submitted 10 July, 2023; v1 submitted 24 February, 2023;
originally announced February 2023.
-
DiuSST: A conceptual model of diurnal warm layers for idealized atmospheric simulations with interactive SST
Authors:
Reyk Börner,
Jan O. Haerter,
Romain Fiévet
Abstract:
The diurnal variability of sea surface temperature (SST) may play an important role for cloud organization above the tropical ocean, with implications for precipitation extremes, storminess, and climate sensitivity. Recent cloud-resolving simulations demonstrate how imposed diurnal SST oscillations can strongly, and delicately, impact mesoscale convective organization. In spite of this nuanced int…
▽ More
The diurnal variability of sea surface temperature (SST) may play an important role for cloud organization above the tropical ocean, with implications for precipitation extremes, storminess, and climate sensitivity. Recent cloud-resolving simulations demonstrate how imposed diurnal SST oscillations can strongly, and delicately, impact mesoscale convective organization. In spite of this nuanced interaction, many idealized modeling studies of tropical convection either assume a constant, homogeneous SST or, in case of a responsive sea surface, represent the upper ocean by a slab with fixed thickness. Here we show that slab ocean models with constant heat capacity fail to capture the wind-dependence of observed diurnal sea surface warming. To alleviate this shortcoming, we present a simple, yet explicitly depth-resolved model of upper-ocean temperature dynamics under atmospheric forcing. Our modular scheme describes turbulent mixing as diffusion with a wind-dependent diffusivity, in addition to a bulk mixing term and heat fluxes entering as sources and sinks. Using observational data, we apply Bayesian inference to calibrate the model. In contrast with a slab model, our model captures the exponential reduction of the diurnal warming amplitude with increasing wind speed. Further, our model performs comparably to a more elaborately parameterized diurnal warm layer model. Formulated as a single partial differential equation with three key tuning parameters, the model is suitable as an interactive numerical boundary condition for idealized atmospheric simulations.
△ Less
Submitted 18 June, 2024; v1 submitted 16 May, 2022;
originally announced May 2022.
-
The FRET-based structural dynamics challenge -- community contributions to consistent and open science practices
Authors:
Eitan Lerner,
Benjamin Ambrose,
Anders Barth,
Victoria Birkedal,
Scott C. Blanchard,
Richard Borner,
Thorben Cordes,
Timothy D. Craggs,
Taekjip Ha,
Gilad Haran,
Thorsten Hugel,
Antonino Ingargiola,
Achillefs Kapanidis,
Don C. Lamb,
Ted Laurence,
Nam ki Lee,
Edward A. Lemke,
Emmanuel Margeat,
Jens Michaelis,
Xavier Michalet,
Daniel Nettels,
Thomas-Otavio Peulen,
Benjamin Schuler,
Claus A. M. Seidel,
Hamid So-leimaninejad
, et al. (1 additional authors not shown)
Abstract:
Single-molecule Förster resonance energy transfer (smFRET) has become a mainstream technique for probing biomolecular structural dynamics. The rapid and wide adoption of the technique by an ever-increasing number of groups has generated many improvements and variations in the technique itself, in methods for sample preparation and characterization, in analysis of the data from such experiments, an…
▽ More
Single-molecule Förster resonance energy transfer (smFRET) has become a mainstream technique for probing biomolecular structural dynamics. The rapid and wide adoption of the technique by an ever-increasing number of groups has generated many improvements and variations in the technique itself, in methods for sample preparation and characterization, in analysis of the data from such experiments, and in analysis codes and algorithms. Recently, several labs that employ smFRET have joined forces to try to bring the smFRET community together in adopting a consensus on how to perform experiments and analyze results for achieving quantitative structural information. These recent efforts include multi-lab blind-tests to assess the accuracy and precision of smFRET between different labs using different procedures, the formal assembly of the FRET community and development of smFRET procedures to be considered for entries in the wwPDB. Here we delve into the different approaches and viewpoints in the field. This position paper describes the current "state-of-the field", points to unresolved methodological issues for quantitative structural studies, provides a set of 'soft recommendations' about which an emerging consensus exists, and a list of resources that are openly available. To make further progress, we strongly encourage 'open science' practices. We hope that this position paper will provide a roadmap for newcomers to the field, as well as a reference for seasoned practitioners.
△ Less
Submitted 4 June, 2020;
originally announced June 2020.
-
Delay master stability of inertial oscillator networks
Authors:
Reyk Börner,
Paul Schultz,
Benjamin Ünzelmann,
Deli Wang,
Frank Hellmann,
Jürgen Kurths
Abstract:
Time lags occur in a vast range of real-world dynamical systems due to finite reaction times or propagation speeds. Here we derive an analytical approach to determine the asymptotic stability of synchronous states in networks of coupled inertial oscillators with constant delay. Building on the master stability formalism, our technique provides necessary and sufficient delay master stability condit…
▽ More
Time lags occur in a vast range of real-world dynamical systems due to finite reaction times or propagation speeds. Here we derive an analytical approach to determine the asymptotic stability of synchronous states in networks of coupled inertial oscillators with constant delay. Building on the master stability formalism, our technique provides necessary and sufficient delay master stability conditions. We apply it to two classes of potential future power grids, where processing delays in control dynamics will likely pose a challenge as renewable energies proliferate. Distinguishing between phase and frequency delay, our method offers an insight into how bifurcation points depend on the network topology of these system designs.
△ Less
Submitted 21 November, 2019;
originally announced November 2019.
-
Recent developments in LLRF and its controls at CERN Linac4
Authors:
Bartosz Bielawski,
Philippe Baudrenghien,
Robert Borner
Abstract:
At the end of the Large Hadron Collider's Run 2, CERN's Proton Injector Linac 2, commissioned in 1978, delivered its final beam in December 2018. For Run 3, from March 2021, a new H$^{-}$ will take over the role: Linac4. The machine has been producing test beams since 2013 and in 2016 it reached its design 160 MeV energy with 20 mA beam current. Since then several improvements have been made which…
▽ More
At the end of the Large Hadron Collider's Run 2, CERN's Proton Injector Linac 2, commissioned in 1978, delivered its final beam in December 2018. For Run 3, from March 2021, a new H$^{-}$ will take over the role: Linac4. The machine has been producing test beams since 2013 and in 2016 it reached its design 160 MeV energy with 20 mA beam current. Since then several improvements have been made which enhance the LLRF performance and stability. In this paper the structure of the machine and the control system are presented. Problems arising from different RF station types are described and our solutions explained, along with new features recently added to the LLRF. An Adaptive Feed Forward implemented as a flexible hybrid hardware-software solution is described, and first results of this application running on a laboratory test stand are presented. Addition of the set point modulation needed for longitudinal phase-space painting is discussed. Finally, software tools for automation of setting up, monitoring and operations are described. As the hardware and low-level software are still reaching maturity, these are only briefly introduced here.
△ Less
Submitted 21 October, 2019; v1 submitted 27 September, 2019;
originally announced September 2019.