-
Temperature-invariant heat conductivity from compensating crystalline and glassy transport: from the Steinbach meteorite to furnace bricks
Authors:
Michele Simoncelli,
Daniele Fournier,
Massimiliano Marangolo,
Etienne Balan,
Keevin Béneut,
Benoit Baptiste,
Béatrice Doisneau,
Nicola Marzari,
Francesco Mauri
Abstract:
The thermal conductivities of crystals and glasses vary strongly and with opposite trends upon heating, decreasing in crystals and increasing in glasses. Here, we show--both with first-principles predictions based on the Wigner transport equation and with thermoreflectance experiments--that the dominant transport mechanisms of crystals (particle-like propagation) and glasses (wave-like tunnelling)…
▽ More
The thermal conductivities of crystals and glasses vary strongly and with opposite trends upon heating, decreasing in crystals and increasing in glasses. Here, we show--both with first-principles predictions based on the Wigner transport equation and with thermoreflectance experiments--that the dominant transport mechanisms of crystals (particle-like propagation) and glasses (wave-like tunnelling) can coexist and compensate in materials with crystalline bond order and nearly glassy bond geometry. We demonstrate that ideal compensation emerges in a sample of silica in the form of tridymite, carved from a meteorite found in Steinbach (Germany) in 1724, and yields a "propagation-tunneling-invariant" (PTI) conductivity that is independent from temperature and intermediate between the opposite trends of $α$-quartz crystal and silica glass. We show how such PTI conductivity occurs in the quantum regime below the Debye temperature, and can largely persist at high temperatures in a geometrically amorphous tridymite phase found in refractory bricks fired for years in furnaces for steel smelting. Last, we discuss implications to heat transfer in solids exposed to extreme temperature variations, ranging from planetary cooling to heating protocols to reduce the carbon footprint of industrial furnaces.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
High pressure-temperature phase diagram of ammonia hemihydrate
Authors:
L. Andriambariarijaona,
F. Datchi H. Zhang,
K. Béneut,
B. Baptiste,
N. Guignot,
S. Ninet
Abstract:
We report a comprehensive experimental investigation of the phase diagram of ammonia hemihydrate (AHH) in the range of 2-30 GPa and 300-700 K, based on Raman spectroscopy and x-ray diffraction experiments and visual observations. Four solid phases, denoted AHH-II, DIMA, pbcc and qbcc, are present in this domain, one of which, AHH-qbcc was discovered in this work. We show that, unlike previously th…
▽ More
We report a comprehensive experimental investigation of the phase diagram of ammonia hemihydrate (AHH) in the range of 2-30 GPa and 300-700 K, based on Raman spectroscopy and x-ray diffraction experiments and visual observations. Four solid phases, denoted AHH-II, DIMA, pbcc and qbcc, are present in this domain, one of which, AHH-qbcc was discovered in this work. We show that, unlike previously thought, the body-centered cubic (bcc) phase obtained on heating AHH-II below 10 GPa, denoted here as AHH-pbcc, is distinct from the DIMA phase, although both present the same bcc structure and O/N positional disorder. Our results actually indicates that AHH-pbcc is a plastic form of DIMA, characterized by free molecular rotations. AHH-qbcc is observed in the intermediate P-T range between AHH-II and DIMA. It presents a complex x-ray pattern reminiscent of the "quasi-bcc" structures that have been theoretically predicted, although none of these structures is consistent with our data. The transition lines between all solid phases as well as the melting curve have been mapped in detail, showing that: (1) the new qbcc phase is the stable one in the intermediate P-T range 10-19 GPa, 300-450 K, although the II-qbcc transition is kinetically hindered for T < 450 K, and II directly transits to DIMA in a gradual fashion from 25 to 35 GPa at 300 K. (2) The stability domain of qbcc shrinks above 450 K and eventually terminates at a pbcc-qbcc-DIMA triple point at 21.5 GPa-630 K. (3) A direct and reversible transition occurs between AHH-pbcc and DIMA above 630 K. (4) The pbcc solid stability domain extends up to the melting line above 3 GPa, and a II-pbcc-liquid triple point is identified at 3 GPa-320 K.
△ Less
Submitted 19 July, 2023;
originally announced July 2023.
-
Multiscale insight into the Cd1-xZnxTe vibrational-mechanical properties -- High-pressure experiments and ab initio calculations
Authors:
Toni Alhaddad,
Mohamad Shoker,
Olivier Pages,
Alain Polian,
Vitor Torres,
Yann Le Godec,
Jean-Paul Itie,
Christophe Bellin,
Keevin Beneut,
Sebastien Diliberto,
Stephanie Michel,
Agnieszka Marasek,
Karol Strzalkowski
Abstract:
The Cd1-xZnxTe semiconductor alloy is a regular system regarding its macroscopic mechanic properties in that its experimental bulk modulus exhibits a linear x-dependence, in line with ab initio predictions. Complexity arises at the bond scale, referring to the intricate Cd1-xZnxTe percolation-type Raman pattern [T. Alhaddad et al., Journal of Applied Physics 133, 065701 (2023)]. This offers an app…
▽ More
The Cd1-xZnxTe semiconductor alloy is a regular system regarding its macroscopic mechanic properties in that its experimental bulk modulus exhibits a linear x-dependence, in line with ab initio predictions. Complexity arises at the bond scale, referring to the intricate Cd1-xZnxTe percolation-type Raman pattern [T. Alhaddad et al., Journal of Applied Physics 133, 065701 (2023)]. This offers an appealing benchmark to test various phonon coupling processes at diverse length scales in a compact multi-oscillator assembly, presently tuned by pressure. At x around 0, an inter-bond long-range/macro electric coupling between the matrix and impurity polar phonons is detuned under pressure. Inversely, at x around 1, an intra-bond short-range/nano mechanic coupling is enforced between the two Zn Te apolar sub-phonons stemming from same and alien percolation-type environments. The pressure-induced macro/nano polar/apolar coupling/decoupling processes are compared within a model of two coupled electric/mechanic harmonic oscillators in terms of a compromise between proximity to resonance and strength of coupling, impacting the degree of mode mixing, with ab initio (apolar case) and analytical (polar case) Raman calculations in support. Notably, the free mechanic coupling at x around 1 opposes the achievement of a phonon exceptional point, manifesting the inhibition of mechanic coupling, earlier evidenced with similar bonds for x smaller than 0.5. Hence, the pressure dependence of a given bond vibration in a disordered alloy basically differs depending on whether the bond is matrix-like, i.e., self-connected in bulk (free coupling), or dispersed, i.e., self-connected in a chain (inhibited coupling). This features pressure-tunable percolation-based on-off phonon switches in complex media.
△ Less
Submitted 26 June, 2023;
originally announced June 2023.
-
Vibrational and mechanical properties of the highly mismatched (Cd,Be)Te semiconductor alloy : Experiment and ab initio calculations
Authors:
A. Elmahjoubi,
M. B. Shoker,
O. Pages,
V. J. B. Torres,
A. Polian,
A. V. Postnikov,
C. Bellin,
K. Beneut,
C. Gardiennet,
G. Kervern,
A. EnNaciri,
L. Broch,
R. Hajj Hussein,
J. -P. Itie,
L. Nataf,
S. Ravy,
P. Franchetti,
S. Diliberto,
S. Michel,
A. Abouais,
K. Strzalkowski
Abstract:
The (Cd, Be)Te semiconductor alloy that exhibits a dramatic mismatch in bond covalency and stiffness clarifying its vibrational and mechanical properties is used as a benchmark to test the limits of the percolation model (PM) worked out to explain the complex Raman spectra of the related but less contrasted (Zn, Be) chalcogenides. The test is done by way of experiment (x smaller than 0.11) combini…
▽ More
The (Cd, Be)Te semiconductor alloy that exhibits a dramatic mismatch in bond covalency and stiffness clarifying its vibrational and mechanical properties is used as a benchmark to test the limits of the percolation model (PM) worked out to explain the complex Raman spectra of the related but less contrasted (Zn, Be) chalcogenides. The test is done by way of experiment (x smaller than 0.11) combining Raman scattering with X ray diffraction at high pressure and ab initio calculations (x around 0, 0.5 and 1). The (macroscopic) bulk modulus B drops below the CdTe value on minor Be incorporation, at variance with a linear B versus x increase predicted ab initio, thus hinting at large anharmonic effects in the real crystal. Yet, no anomaly occurs at the microscopic (bond) scale as the regular bimodal PM Raman signal predicted ab initio for the BeTe bond in minority (x around 0 and 0.5) is (barely) detected experimentally. Although at large Be content (x around 1) the same bimodal signal relaxes down to inversion, an unprecedented case, specific pressure dependencies of the regular (x around 0 and 0.5) and inverted (x around 1) BeTe Raman doublets are in line with PM predictions. Hence, the PM applies as such to (Cd, Be)Te albeit in a relaxed form, without further refinement. This enhances the scheme validity as a generic descriptor of phonons in alloys.
△ Less
Submitted 3 March, 2023;
originally announced March 2023.
-
Boron carbide under torsional deformation: evidence of the formation of chain vacancies in the plastic regime
Authors:
Amrita Chakraborti,
Antoine Jay,
Olivier Hardouin Duparc,
Jelena Sjakste,
Keevin Béneut,
Nathalie Vast,
Yann Le Godec
Abstract:
We report a combined experimental and theoretical study of boron carbide under stress/deformation. A special rotating anvil press, the rotating tomography Paris Edinburgh cell (RotoPEC), has been used to apply torsional deformation to boron carbide under a pressure of 5~GPa at ambient temperature. Subsequent damages and point defects have been analysed at ambient pressure by energy dispersive X-ra…
▽ More
We report a combined experimental and theoretical study of boron carbide under stress/deformation. A special rotating anvil press, the rotating tomography Paris Edinburgh cell (RotoPEC), has been used to apply torsional deformation to boron carbide under a pressure of 5~GPa at ambient temperature. Subsequent damages and point defects have been analysed at ambient pressure by energy dispersive X-ray microdiffraction at the synchrotron and by Raman spectroscopy, combined with calculations based on the density functional theory (DFT). We show that apart from the signals due to B$_4$C, new peaks appear in both characterisation methods. The DFT calculations of atomic structures and phonon frequencies enable us to attribute most of the new peaks to boron vacancies in the intericosahedral chains of boron carbide. Some of the Raman spectra also show three peaks that have been attributed to amorphous boron carbide in the literature. Deformed boron carbide thus shows small inclusions of clusters of boron carbide with chain vacancies, and/or small zones interpreted as amorphous zones.
△ Less
Submitted 9 August, 2021;
originally announced August 2021.
-
Triplet excitations in the frustrated spin ladder Li$_2$Cu$_2$O(SO$_4$)$_2$
Authors:
Ornella Vaccarelli,
Andreas Honecker,
Paola Giura,
Keevin Béneut,
Björn Fåk,
Gwenaëlle Rousse,
Guillaume Radtke
Abstract:
Magnetic excitations of the recently discovered frustrated spin-1/2 two-leg ladder system Li$_2$Cu$_2$O(SO$_4$)$_2$ are investigated using inelastic neutron scattering, magnetic susceptibility and infrared absorption measurements. Despite the presence of a magnetic dimerization concomitant with the tetragonal-to-triclinic structural distortion occurring below 125 K, neutron scattering experiments…
▽ More
Magnetic excitations of the recently discovered frustrated spin-1/2 two-leg ladder system Li$_2$Cu$_2$O(SO$_4$)$_2$ are investigated using inelastic neutron scattering, magnetic susceptibility and infrared absorption measurements. Despite the presence of a magnetic dimerization concomitant with the tetragonal-to-triclinic structural distortion occurring below 125 K, neutron scattering experiments reveal the presence of dispersive triplet excitations above a spin gap of $Δ= 10.6$ meV at 1.5 K, a value consistent with the estimates extracted from magnetic susceptibility. The likely detection of these spin excitations in infrared spectroscopy is explained by invoking a dynamic Dzyaloshinskii-Moriya mechanism in which light is coupled to the dimer singlet-to-triplet transition through an optical phonon. These results are qualitatively explained by exact diagonalization and higher-order perturbation calculations carried out on the basis of the dimerized spin Hamiltonian derived from first-principles.
△ Less
Submitted 7 February, 2019;
originally announced February 2019.
-
The crystal structure of Rb2Ti2O5
Authors:
R. Federicci,
B. Baptiste,
F. Finocchi,
A. F. Popa,
L. Brohan,
K. Beneut,
P. Giura,
G. Rousse,
A. Descamps-Mandine,
T. Douillard,
A. Shukla,
B. Leridon
Abstract:
Recent results have demonstrated an exceptionally high dielectric constant in the range 200 K-330 K in a crystalline tianium oxide : Rb2Ti2O5. In this article, the possibility of a structural transition giving rise to ferroelectricity is carefully inspected. In particular X-Ray diffraction, high resolution transmission electron microscopy and Raman spectroscopy are performed. The crystal structure…
▽ More
Recent results have demonstrated an exceptionally high dielectric constant in the range 200 K-330 K in a crystalline tianium oxide : Rb2Ti2O5. In this article, the possibility of a structural transition giving rise to ferroelectricity is carefully inspected. In particular X-Ray diffraction, high resolution transmission electron microscopy and Raman spectroscopy are performed. The crystal structure is shown to remain invariant and centrosymmetric at all temperatures between 90 K and 450 K. The stability of the C2/m structure is confirmed by DFT calculations. These important findings allow to discard the existence of a conventional ferroelectric phase transition as a possible mechanism for the unusual dielectric constant observed in this material.
△ Less
Submitted 14 March, 2017;
originally announced March 2017.
-
Magnetic Nanorods Confined in a Lamellar Lyotropic Phase
Authors:
Keevin Béneut,
Doru Constantin,
Patrick Davidson,
Arnaud Dessombz,
Corinne Chanéac
Abstract:
The dilute lamellar phase of the nonionic surfactant C$_{12}$EO$_5$ was doped with goethite (iron oxide) nanorods up to a fraction of 5 vol. %. The interaction between the inclusions and the host phase was studied by polarized optical microscopy (with or without an applied magnetic field) and by small-angle X-ray scattering. We find that, when the orientation of the nanorods is modified using the…
▽ More
The dilute lamellar phase of the nonionic surfactant C$_{12}$EO$_5$ was doped with goethite (iron oxide) nanorods up to a fraction of 5 vol. %. The interaction between the inclusions and the host phase was studied by polarized optical microscopy (with or without an applied magnetic field) and by small-angle X-ray scattering. We find that, when the orientation of the nanorods is modified using the magnetic field, the texture of the lamellar phase changes accordingly; one can thus induce a homeotropic-planar reorientation transition. On the other hand, the lamellar phase induces an attractive interaction between the nanorods. In more concentrated lamellar phases (under stronger confinement) the particles form aggregates. This behavior is not encountered for a similar system doped with spherical particles, emphasizing the role of particle shape in the interaction between do** particles and the host phase.
△ Less
Submitted 11 April, 2015;
originally announced April 2015.
