-
Upgrading SPHERE with the second stage AO system SAXO+: non-common path aberrations estimation and correction
Authors:
Johan Mazoyer,
Charles Goulas,
Fabrice Vidal,
Isaac Bernardino Dinis,
Julien Milli,
Michel Tallon,
Raphaël Galicher,
Oliver Absil,
Clémentine Béchet,
Anthony Boccaletti,
Florian Ferreira,
Maud Langlois,
Patrice Martinez,
Laurent Mugnier,
Mamadou N'diaye,
Gilles Orban de Xivry,
Axel Potier,
Isabelle Tallon-Bosc,
Arthur Vigan
Abstract:
SAXO+ is a planned enhancement of the existing SAXO, the VLT/ SPHERE adaptive optics system, deployed on ESO's Very Large Telescope. This upgrade is designed to significantly enhance the instrument's capacity to detect and analyze young Jupiter-like planets. The pivotal addition in SAXO+ is a second-stage adaptive optics system featuring a dedicated near-infrared pyramid wavefront sensor and a sec…
▽ More
SAXO+ is a planned enhancement of the existing SAXO, the VLT/ SPHERE adaptive optics system, deployed on ESO's Very Large Telescope. This upgrade is designed to significantly enhance the instrument's capacity to detect and analyze young Jupiter-like planets. The pivotal addition in SAXO+ is a second-stage adaptive optics system featuring a dedicated near-infrared pyramid wavefront sensor and a second deformable mirror. This secondary stage is strategically integrated to address any residual wavefront errors persisting after the initial correction performed by the current primary AO loop, SAXO. However, several recent studies clearly showed that in good conditions, even in the current system SAXO, non-common path aberrations (NCPAs) are the limiting factor of the final normalized intensity in focal plane, which is the final metric for ground-based high-contrast instruments. This is likely to be even more so the case with the new AO system, with which the AO residuals will be minimized. Several techniques have already been extensively tested on SPHERE in internal source and/or on-sky and will be presented in this paper. However, the use of a new type of sensor for the second stage, a pyramid wavefront sensor, will likely complicate the correction of these aberrations. Using an end-to-end AO simulation tool, we conducted simulations to gauge the effect of measured SPHERE NCPAs in the coronagraphic image on the second loop system and their correction using focal plane wavefront sensing systems. We finally analyzed how the chosen position of SAXO+ in the beam will impact the evolution of the NCPAs in the new instrument.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
Numerical simulations for the SAXO+ upgrade: Performance analysis of the adaptive optics system
Authors:
Charles Goulas,
Raphaël Galicher,
Fabrice Vidal,
Johan Mazoyer,
Florian Ferreira,
Arnaud Sevin,
Anthony Boccaletti,
Eric Gendron,
Clémentine Béchet,
Michel Tallon,
Maud Langlois,
Caroline Kulcsár,
Henri-François Raynaud,
Nicolas Galland,
Laura Schreiber,
Isaac Bernardino Dinis,
François Wildi,
Gaël Chauvin,
Julien Milli
Abstract:
SPHERE, operating at the VLT since 2014, is currently one of the high-contrast instruments with a higher performance. Its adaptive optics system, known as SAXO, will be upgraded to SAXO+, which features the addition of a second stage of adaptive optics. This stage will use a near-infrared pyramid wavefront sensor to record images of fainter exoplanets around redder stars. In this work, we compare…
▽ More
SPHERE, operating at the VLT since 2014, is currently one of the high-contrast instruments with a higher performance. Its adaptive optics system, known as SAXO, will be upgraded to SAXO+, which features the addition of a second stage of adaptive optics. This stage will use a near-infrared pyramid wavefront sensor to record images of fainter exoplanets around redder stars. In this work, we compare the performance of SAXO and SAXO+. We look for the optimal values of the key system parameters of SAXO+ for various science cases and turbulence conditions. We performed numerical simulations using COMPASS, an end-to-end adaptive optics simulation tool. We simulated perfect coronagraph images of an on-axis point source, and we minimized the residual starlight intensity between 3 and 5 $λ/D$ as a performance criterion. The explored parameter space includes science cases, turbulence conditions, and key system parameters. In every science case and turbulence condition, SAXO+ reduces the residual starlight intensity inside the correction zone of the second stage by a factor of ten compared to SAXO. The optimal first stage gain is lower for SAXO+ than for SAXO alone. We quantified the gain in performance of SAXO+ when changing the second stage frequency from 2 kHz to 3 kHz, and we conclude that 2 kHz may be sufficient for most realistic conditions. We give the optimal first stage gain as well as the first and second stage frequencies for every seeing, coherence time, and science case. Finally, we find that a 2 ${λ_{\mathrm{WFS}}}/D$ pyramid modulation radius is a good trade-off between performance and robustness against varying turbulence conditions. This study shows that the future SAXO+ system will outperform the current SAXO system in all studied cases.
△ Less
Submitted 25 June, 2024;
originally announced June 2024.
-
SAXO+ upgrade : second stage AO system end-to-end numerical simulations
Authors:
Charles Goulas,
Fabrice Vidal,
Raphaël Galicher,
Johan Mazoyer,
Florian Ferreira,
Arnaud Sevin,
Anthony Boccaletti,
Éric Gendron,
Clémentine Béchet,
Michel Tallon,
Maud Langlois,
Caroline Kulcsár,
Henri-François Raynaud,
Nicolas Galland,
Laura Schreiber,
Gaël Chauvin,
Julien Milli
Abstract:
SAXO+ is a proposed upgrade to SAXO, the AO system of the SPHERE instrument on the ESO Very Large Telescope. It will improve the capabilities of the instrument for the detection and characterization of young giant planets. It includes a second stage adaptive optics system composed of a dedicated near-infrared wavefront sensor and a deformable mirror. This second stage will remove the residual wave…
▽ More
SAXO+ is a proposed upgrade to SAXO, the AO system of the SPHERE instrument on the ESO Very Large Telescope. It will improve the capabilities of the instrument for the detection and characterization of young giant planets. It includes a second stage adaptive optics system composed of a dedicated near-infrared wavefront sensor and a deformable mirror. This second stage will remove the residual wavefront errors left by the current primary AO loop (SAXO). This paper focuses on the numerical simulations of the second stage (SAXO+) and concludes on the impact of the main AO parameters used to build the design strategy. Using an end-to-end AO simulation tool (COMPASS), we investigate the impact of several parameters on the performance of the AO system. We measure the performance in minimizing the star residuals in the coronagraphic image. The parameters that we study are : the second stage frequency, the photon flux on each WFS, the first stage gain and the DM number of actuators of the second stage. We show that the performance is improved by a factor 10 with respect to the current AO system (SAXO). The optimal second stage frequency is between 1 and 2 kHz under good observing conditions. In a red star case, the best SAXO+ performance is achieved with a low first stage gain of 0.05, which reduces the first stage rejection.
△ Less
Submitted 24 October, 2023;
originally announced October 2023.
-
Upgrading the high contrast imaging facility SPHERE: science drivers and instrument choices
Authors:
A. Boccaletti,
G. Chauvin,
F. Wildi,
J. Milli,
E. Stadler,
E. Diolaiti,
R. Gratton,
F. Vidal,
M. Loupias,
M. Langlois,
F. Cantalloube,
M. N'Diaye,
D. Gratadour,
F. Ferreira,
M. Tallon,
J. Mazoyer,
D. Segransan,
D. Mouillet,
J. -L. Beuzit,
M. Bonnefoy,
R. Galicher,
A. Vigan,
I. Snellen,
M. Feldt,
S. Desidera
, et al. (49 additional authors not shown)
Abstract:
SPHERE+ is a proposed upgrade of the SPHERE instrument at the VLT, which is intended to boost the current performances of detection and characterization for exoplanets and disks. SPHERE+ will also serve as a demonstrator for the future planet finder (PCS) of the European ELT. The main science drivers for SPHERE+ are 1/ to access the bulk of the young giant planet population down to the snow line (…
▽ More
SPHERE+ is a proposed upgrade of the SPHERE instrument at the VLT, which is intended to boost the current performances of detection and characterization for exoplanets and disks. SPHERE+ will also serve as a demonstrator for the future planet finder (PCS) of the European ELT. The main science drivers for SPHERE+ are 1/ to access the bulk of the young giant planet population down to the snow line ($3-10$ au), to bridge the gap with complementary techniques (radial velocity, astrometry); 2/ to observe fainter and redder targets in the youngest ($1-10$\,Myr) associations compared to those observed with SPHERE to directly study the formation of giant planets in their birth environment; 3/ to improve the level of characterization of exoplanetary atmospheres by increasing the spectral resolution in order to break degeneracies in giant planet atmosphere models. Achieving these objectives requires to increase the bandwidth of the xAO system (from $\sim$1 to 3\,kHz) as well as the sensitivity in the infrared (2 to 3\,mag). These features will be brought by a second stage AO system optimized in the infrared with a pyramid wavefront sensor. As a new science instrument, a medium resolution integral field spectrograph will provide a spectral resolution from 1000 to 5000 in the J and H bands. This paper gives an overview of the science drivers, requirements and key instrumental trade-off that were done for SPHERE+ to reach the final selected baseline concept.
△ Less
Submitted 5 September, 2022;
originally announced September 2022.
-
The wavefront sensing making-of for THEMIS solar telescope
Authors:
Michel Tallon,
Éric Thiébaut,
Maud Langlois,
Bernard Gelly,
Richard Douet,
Clémentine Béchet,
Loïc Denis,
Gil Moretto
Abstract:
An adaptive optics system with a single deformable mirror is being implemented on the THEMIS 90cm solar telescope. This system is designed to operate in the visible and is required to be as robust as possible in order to deliver the best possible correction in any atmospheric conditions, even if wavefronts are sensed on some low-contrast solar granulation. In extreme conditions, the images given b…
▽ More
An adaptive optics system with a single deformable mirror is being implemented on the THEMIS 90cm solar telescope. This system is designed to operate in the visible and is required to be as robust as possible in order to deliver the best possible correction in any atmospheric conditions, even if wavefronts are sensed on some low-contrast solar granulation. In extreme conditions, the images given by the subapertures of the Shack-Hartmann wavefront sensor get randomly blurred in space, in the set of subapertures, and the distribution of blurred images is rapidly changing in time, some of them possibly fading away. The algorithms we have developed for such harsh conditions rely on inverse problem approach. As an example, with the gradients of the wavefronts, the wavefront sensor also estimates their errors, including their covariance. This information allows the control loop to promptly optimize itself to the fast varying conditions, both in space (wavefront reconstruction) and in time. A major constraint is to fit the calculations in a low-cost multi-core CPU. An overview of the algorithms in charge of implementing this strategy is presented, focusing on wavefront sensing.
△ Less
Submitted 8 January, 2021;
originally announced January 2021.
-
From Co- Toward Multi-Simulation of Smart Grids based on HLA and FMI Standards
Authors:
Martin Lévesque,
Christophe Béchet,
Eric Suignard,
Martin Maier,
Anne Picault,
Géza Joós
Abstract:
In this article, a multi-simulation model is proposed to measure the performance of all Smart Grid perspectives as defined in the IEEE P2030 standard. As a preliminary implementation, a novel information technology (IT) and communication multi-simulator is developed following an High Level Architecture (HLA). To illustrate the usefulness of such a multi-simulator, a case study of a distribution ne…
▽ More
In this article, a multi-simulation model is proposed to measure the performance of all Smart Grid perspectives as defined in the IEEE P2030 standard. As a preliminary implementation, a novel information technology (IT) and communication multi-simulator is developed following an High Level Architecture (HLA). To illustrate the usefulness of such a multi-simulator, a case study of a distribution network operation application is presented using real-world topology configurations with realistic communication traffic based on IEC 61850. The multi-simulator allows to quantify, in terms of communication delay and system reliability, the impacts of aggregating all traffic on a low-capacity wireless link based on Digital Mobile Radio (DMR) when a Long Term Evolution (LTE) network failure occurs. The case study illustrates that such a multi-simulator can be used to experiment new smart grid mechanisms and verify their impacts on all smart grid perspectives in an automated manner. Even more importantly, multi-simulation can prevent problems before modifying/upgrading a smart grid and thus potentially reduce utility costs.
△ Less
Submitted 17 December, 2014;
originally announced December 2014.
-
Towards a reliability assessment of the Cn2 and wind speed vertical profiles retrieved from GeMS
Authors:
Benoit Neichel,
Elena Masciadri,
Andrés R. Guesalaga,
Franck Lascaux,
Clémentine Béchet
Abstract:
The advent of a new generation of Adaptive Optics systems called Wide Field AO (WFAO) mark the beginning of a new era. By using multiple Guide Stars (GSs), either Laser Guide Stars (LGSs) or Natural Guide Stars (NGSs), WFAO significantly increases the field of view of the AO-corrected images, and the fraction of the sky that can benefit from such correction. Different typologies of WFAO have been…
▽ More
The advent of a new generation of Adaptive Optics systems called Wide Field AO (WFAO) mark the beginning of a new era. By using multiple Guide Stars (GSs), either Laser Guide Stars (LGSs) or Natural Guide Stars (NGSs), WFAO significantly increases the field of view of the AO-corrected images, and the fraction of the sky that can benefit from such correction. Different typologies of WFAO have been studied over the past years. They all require multiple GSs to perform a tomographic analysis of the atmospheric turbulence. One of the fundamental aspects of the new WFAO systems is the knowledge of the spatio-temporal distribution of the turbulence above the telescope. One way to get to this information is to use the telemetry data provided by the WFAO system itself. Indeed, it has been demonstrated that WFAO systems allows one to derive the Cn2 and wind profile in the main turbulence layers (see e.g. Cortes et al. 2012). This method has the evident advantage to provide information on the turbulence stratification that effectively affects the AO system, property more difficultly respected by independently vertical profilers. In this paper, we compare the wind speeds profiles of GeMS with those predicted by a non-hydrostatical mesoscale atmospherical model (Meso-NH). It has been proved (Masciadri et al., 2013), indeed, that this model is able to provide reliable wind speed profiles on the whole troposphere and stratosphere (up to 20-25 km) above top-level astronomical sites. Correlation with measurements revealed to be very satisfactory when the model performances are analyzed from a statistical point of view as well on individual nights. Such a system appears therefore as an interesting reference to be used to quantify the GeMS wind speed profiles reliability.
△ Less
Submitted 15 July, 2014;
originally announced July 2014.
-
Beam sha** for laser-based adaptive optics in astronomy
Authors:
Clémentine Béchet,
Andrés Guesalaga,
Benoit Neichel,
Vincent Fesquet,
Héctor González-Núñez,
Sebastián Zúñiga,
Pedro Escarate,
Dani Guzman
Abstract:
The availability and performance of laser-based adaptive optics (AO) systems are strongly dependent on the power and quality of the laser beam before being projected to the sky. Frequent and time-consuming alignment procedures are usually required in the laser systems with free-space optics to optimize the beam. Despite these procedures, significant distortions of the laser beam have been observed…
▽ More
The availability and performance of laser-based adaptive optics (AO) systems are strongly dependent on the power and quality of the laser beam before being projected to the sky. Frequent and time-consuming alignment procedures are usually required in the laser systems with free-space optics to optimize the beam. Despite these procedures, significant distortions of the laser beam have been observed during the first two years of operation of the Gemini South multi-conjugate adaptive optics system (GeMS). A beam sha** concept with two deformable mirrors is investigated in order to provide automated optimization of the laser quality for astronomical AO. This study aims at demonstrating the correction of quasi-static aberrations of the laser, in both amplitude and phase, testing a prototype of this two-deformable mirror concept on GeMS. The paper presents the results of the preparatory study before the experimental phase. An algorithm to control amplitude and phase correction, based on phase retrieval techniques, is presented with a novel unwrap** method. Its performance is assessed via numerical simulations, using aberrations measured at GeMS as reference. The results predict effective amplitude and phase correction of the laser distortions with about 120 actuators per mirror and a separation of 1.4 m between the mirrors. The spot size is estimated to be reduced by up to 15% thanks to the correction. In terms of AO noise level, this has the same benefit as increasing the photon flux by 40%.
△ Less
Submitted 21 May, 2014;
originally announced May 2014.
-
Cn2 and wind profiler method to quantify the frozen flow decay using wide-field laser guide stars adaptive optics
Authors:
Andrés Guesalaga,
Benoit Neichel,
Angela Cortes,
Clémentine Béchet,
Dani Guzmán
Abstract:
We use spatio-temporal cross-correlations of slopes from five Shack-Hartmann wavefront sensors to analyse the temporal evolution of the atmospheric turbulence layers at different altitudes. The focus is on the verification of the frozen flow assumption. The data is coming from the Gemini South Multi-Conjugate Adaptive Optics System (GeMS). First, the Cn2 and wind profiling technique is presented.…
▽ More
We use spatio-temporal cross-correlations of slopes from five Shack-Hartmann wavefront sensors to analyse the temporal evolution of the atmospheric turbulence layers at different altitudes. The focus is on the verification of the frozen flow assumption. The data is coming from the Gemini South Multi-Conjugate Adaptive Optics System (GeMS). First, the Cn2 and wind profiling technique is presented. This method provides useful information for the AO system operation such as the number of existing turbulence layers, their associated velocities, altitudes and strengths and also a mechanism to estimate the dome seeing contribution to the total turbulence. Next, by identifying the turbulence layers we show that it is possible to estimate the rate of decay in time of the correlation among turbulence measurements. We reduce on-sky data obtained during 2011, 2012 and 2013 campaigns and the first results suggest that the rate of temporal de-correlation can be expressed in terms of a single parameter that is independent of the layer altitude and turbulence strength. Finally, we show that the decay rate of the frozen-flow contribution increases linearly with the layer speed. The observed evolution of the decay rate confirms the potential interest of the predictive control for wide-field AO systems.
△ Less
Submitted 27 February, 2014;
originally announced February 2014.
-
First astronomical unit scale image of the GW Ori triple. Direct detection of a new stellar companion
Authors:
J. -P. Berger,
J. D. Monnier,
R. Millan-Gabet,
S. Renard,
E. Pedretti,
W. Traub,
C. Bechet,
M. Benisty,
N. Carleton,
P. Haguenauer,
P. Kern,
P. Labeye,
F. Longa,
M. Lacasse,
F. Malbet,
K. Perraut,
S. Ragland,
P. Schloerb,
P. A. Schuller,
E. Thiébaut
Abstract:
Young and close multiple systems are unique laboratories to probe the initial dynamical interactions between forming stellar systems and their dust and gas environment. Their study is a key building block to understanding the high frequency of main-sequence multiple systems. However, the number of detected spectroscopic young multiple systems that allow dynamical studies is limited. GW Orionis is…
▽ More
Young and close multiple systems are unique laboratories to probe the initial dynamical interactions between forming stellar systems and their dust and gas environment. Their study is a key building block to understanding the high frequency of main-sequence multiple systems. However, the number of detected spectroscopic young multiple systems that allow dynamical studies is limited. GW Orionis is one such system. It is one of the brightest young T Tauri stars and is surrounded by a massive disk. Our goal is to probe the GW Orionis multiplicity at angular scales at which we can spatially resolve the orbit. We used the IOTA/IONIC3 interferometer to probe the environment of GW Orionis with an astronomical unit resolution in 2003, 2004, and 2005. By measuring squared visibilities and closure phases with a good UV coverage we carry out the first image reconstruction of GW Ori from infrared long-baseline interferometry. We obtain the first infrared image of a T Tauri multiple system with astronomical unit resolution. We show that GW Orionis is a triple system, resolve for the first time the previously known inner pair (separation $ρ\sim$1.4 AU) and reveal a new more distant component (GW Ori C) with a projected separation of $\sim$8 AU with direct evidence of motion. Furthermore, the nearly equal (2:1) H-band flux ratio of the inner components suggests that either GW Ori B is undergoing a preferential accretion event that increases its disk luminosity or that the estimate of the masses has to be revisited in favour of a more equal mass-ratio system that is seen at lower inclination. Accretion disk models of GW Ori will need to be completely reconsidered because of this outer companion C and the unexpected brightness of companion B.
△ Less
Submitted 20 March, 2011;
originally announced March 2011.
-
Direct constraint on the distance of y2 Velorum from AMBER/VLTI observations
Authors:
F. Millour,
R. G. Petrov,
O. Chesneau,
D. Bonneau,
L. Dessart,
C. Bechet,
I. Tallon-Bosc,
M. Tallon,
E. Thiébaut,
F. Vakili,
F. Malbet,
D. Mourard,
G. Zins,
A. Roussel,
S. Robbe-Dubois,
P. Puget,
K. Perraut,
F. Lisi,
E. Le Coarer,
S. Lagarde,
P. Kern,
L. Glück,
G. Duvert,
A. Chelli,
Y. Bresson
, et al. (73 additional authors not shown)
Abstract:
In this work, we present the first AMBER observations, of the Wolf-Rayet and O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered spectrally dispersed visibilities, as well as differential and closure phases, with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret thes…
▽ More
In this work, we present the first AMBER observations, of the Wolf-Rayet and O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered spectrally dispersed visibilities, as well as differential and closure phases, with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret these data in the context of a binary system with unresolved components, neglecting in a first approximation the wind-wind collision zone flux contribution. We show that the AMBER observables result primarily from the contribution of the individual components of the WR+O binary system. We discuss several interpretations of the residuals, and speculate on the detection of an additional continuum component, originating from the free-free emission associated with the wind-wind collision zone (WWCZ), and contributing at most to the observed K-band flux at the 5% level. The expected absolute separation and position angle at the time of observations were 5.1±0.9mas and 66±15° respectively. However, we infer a separation of 3.62+0.11-0.30 mas and a position angle of 73+9-11°. Our analysis thus implies that the binary system lies at a distance of 368+38-13 pc, in agreement with recent spectrophotometric estimates, but significantly larger than the Hipparcos value of 258+41-31 pc.
△ Less
Submitted 31 October, 2006;
originally announced October 2006.