-
Trajectory Extending Kinetic Monte Carlo Simulations to Evaluate Pure and Gas Mixture Diffusivities through a Dense Polymeric Membrane
Authors:
Subhadeep Dasgupta,
Arun K. S,
K. Ganapathy Ayappa,
Prabal K. Maiti
Abstract:
With renewed interest in CO2 separations, carbon molecular sieving (CMS) membrane performance evaluation requires diffusion coefficients as inputs to have reliable estimate of the permeability. An optimal material is desired to have both high selectivity and permeability. Gases diffusing through dense, CMS and polymeric membranes experience extended sub-diffusive regimes which hinders reliable ext…
▽ More
With renewed interest in CO2 separations, carbon molecular sieving (CMS) membrane performance evaluation requires diffusion coefficients as inputs to have reliable estimate of the permeability. An optimal material is desired to have both high selectivity and permeability. Gases diffusing through dense, CMS and polymeric membranes experience extended sub-diffusive regimes which hinders reliable extraction of diffusion coefficients from mean squared displacement data. We improve the sampling of the diffusive landscape by implementing the trajectory extending kinetic Monte Carlo (TEKMC) technique to efficiently extend MD trajectories from ns to μs timescales. The obtained self-diffusion coefficient of pure CO2 in CMS membranes derived from 6FDA/BPDA-DAM precursor polymer melt is found in agreement with previous experimental findings. We also extend the TEKMC algorithm to evaluate the mixture diffusivities in binary mixtures to determine the permselectivity of CO2 in CH4 and N2 mixtures. The mixture diffusion coefficient of CO2 ranges from 1.3-7 x 10^{-6} cm6{2}s^{-1} in binary mixture CO2:CH4 which is significantly higher than the pure gas diffusion coefficient. Robeson plot comparisons show that the permselectivity obtained from pure gas diffusion data are significantly lower than that predicted using mixture diffusivity data. Specifically in the case of the CO2:N2 mixture we find that using mixture diffusivities led to permeslectivites lying above the Robeson limit highlighting the importance of using mixture diffusivity data for an accurate evaluation of the membrane performance. Combined with gas solubilities obtained from grand-canonical Monte Carlo simulations, our work shows that simulations with the TEKMC method can be used to reliably evaluate the performance of materials for gas separations.
△ Less
Submitted 6 November, 2023;
originally announced November 2023.
-
Using Multiscale Molecular Dynamics Simulations to Obtain Insights into Pore Forming Toxin Mechanisms
Authors:
Rajat Desikan,
Amit Behera,
Prabal K. Maiti,
K. Ganapathy Ayappa
Abstract:
Pore forming toxins (PFTs) are virulent proteins released by several species, including many strains of bacteria, to attack and kill host cells. In this article, we focus on the utility of molecular dynamics (MD) simulations and the molecular insights gleaned from these techniques on the pore forming pathways of PFTs. In addition to all-atom simulations which are widely used, coarse grained MARTIN…
▽ More
Pore forming toxins (PFTs) are virulent proteins released by several species, including many strains of bacteria, to attack and kill host cells. In this article, we focus on the utility of molecular dynamics (MD) simulations and the molecular insights gleaned from these techniques on the pore forming pathways of PFTs. In addition to all-atom simulations which are widely used, coarse grained MARTINI models and structure based models have also been used to study PFTs. Here, the emphasis is on methods and techniques involved while setting up, monitoring, and evaluating properties from MD simulations of PFTs in a membrane environment. We draw from several case studies to illustrate how MD simulations have provided molecular insights into protein-protein and protein-lipid interactions, lipid dynamics, conformational transitions and structures of both the oligomeric intermediates and assembled pore structures.
△ Less
Submitted 26 October, 2020;
originally announced October 2020.
-
Influence of Surface Hydrophilicity and Hydration on the Rotational Relaxation of Supercooled Water on Graphene Oxide Surfaces
Authors:
Rajasekaran M,
K. Ganapathy Ayappa
Abstract:
Hydration or interfacial water present in biomolecules and inorganic solids have been shown to exhibit a dynamical transition upon supercooling. However, an understanding of the extent of the underlying surface hydrophilicity as well as the local distribution of hydrophilic/hydrophobic patches on the dynamical transition is unexplored. Here, we use molecular dynamics simulations with a TIP4P/2005…
▽ More
Hydration or interfacial water present in biomolecules and inorganic solids have been shown to exhibit a dynamical transition upon supercooling. However, an understanding of the extent of the underlying surface hydrophilicity as well as the local distribution of hydrophilic/hydrophobic patches on the dynamical transition is unexplored. Here, we use molecular dynamics simulations with a TIP4P/2005 water model to study translational and rotational relaxation dynamics of interfacial water on graphene surfaces. The purpose of this study is to investigate the influence of both surface chemistry as well as the extent of hydration on the rotational transitions of interfacial water on graphene oxide (GO) surfaces in the deeply supercooled region. We have considered three graphene-based surfaces; a GO surface with equal proportions of oxidized and pristine graphene regions in a striped topology, a fully oxidized surface and a pristine graphene surface. The dipole relaxation time of interfacial water shows a strong-to-strong, strong, and a fragile-to-strong transition on these surfaces, respectively, in the temperature range of 210-298 K. In contrast, bulk water shows a fragile-to-strong transition upon supercooling. In all these cases at high hydration, interfacial water co-exists with a thick water film with bulk-like properties. To investigate the influence of bulk water on dynamical transitions, we simulated a low hydration regime where only bound water (surface water) is present on the GO surfaces and found that the rotational relaxation of surface water on both the GO and fully oxidized surfaces show a single Arrhenius behavior. Our results indicate that not only does the local extent of surface hydrophilicity play a role in determining the energy landscape explored by the water molecules upon supercooling, but the presence of bulk water also modulates the dynamic transition.
△ Less
Submitted 23 March, 2020;
originally announced March 2020.
-
Dynamical Transitions of Supercooled Water in Graphene oxide Nanopores: Influence of Surface Hydrophobicity
Authors:
Rajasekaran M,
K. Ganapathy Ayappa
Abstract:
Molecular dynamics simulations are carried out to explore the dynamical crossover phenomenon in strongly confined and mildly supercooled water in graphene oxide nanopores. In contrast to studies where confinement is used to study the properties of bulk water, we are interested in the dynamical transitions for strongly confined water in the absence of any bulk-like water. The influence of the physi…
▽ More
Molecular dynamics simulations are carried out to explore the dynamical crossover phenomenon in strongly confined and mildly supercooled water in graphene oxide nanopores. In contrast to studies where confinement is used to study the properties of bulk water, we are interested in the dynamical transitions for strongly confined water in the absence of any bulk-like water. The influence of the physicochemical nature of the graphene oxide surface on the dynamical transitions is investigated by varying the extent of hydrophobicity on the confining surfaces placed at an inter-surface separation of 10 Å\,. All dynamical quantities show a typical slowing down as the temperature is lowered from 298 to 200 K; however, the nature of the transition is a distinct function of the surface type. Water confined between surfaces consisting of alternating hydrophilic and hydrophobic regions exhibit a strong-to-strong dynamical transition in the diffusion coefficients and rotational relaxation times at a crossover temperature of 237 K and show a fragile-to-strong transition in the $α$-relaxation time at 238 K. The observed crossover temperature is much higher than the freezing point of the SPC/E water model used in this study, indicating that these dynamical transitions can occur with mild supercooling under strong confinement in the absence of bulk-like water. In contrast, water confined in hydrophilic pore shows a single Arrhenius energy barrier over the entire temperature range. Our results indicate that in addition to confinement, the nature of the surface can play a critical role in determining the dynamical transitions for water upon supercooling.
△ Less
Submitted 6 March, 2020;
originally announced March 2020.
-
Methane and carbon dioxide adsorption on edge-functionalized graphene: A comparative DFT study
Authors:
Brandon C. Wood,
Shreyas Y. Bhide,
Debosruti Dutta,
Vinay S. Kandagal,
Amar Deep Pathak,
Sudeep N. Punnathanam,
K. G. Ayappa,
Shobhana Narasimhan
Abstract:
With a view towards optimizing gas storage and separation in crystalline and disordered nanoporous carbon-based materials, we use ab initio density functional theory calculations to explore the effect of chemical functionalization on gas binding to exposed edges within model carbon nanostructures. We test the geometry, energetics, and charge distribution of in-plane and out-of-plane binding of CO2…
▽ More
With a view towards optimizing gas storage and separation in crystalline and disordered nanoporous carbon-based materials, we use ab initio density functional theory calculations to explore the effect of chemical functionalization on gas binding to exposed edges within model carbon nanostructures. We test the geometry, energetics, and charge distribution of in-plane and out-of-plane binding of CO2 and CH4 to model zigzag graphene nanoribbons edge-functionalized with COOH, OH, NH2, H2PO3, NO2, and CH3. Although different choices for the exchange-correlation functional lead to a spread of values for the binding energy, trends across the functional groups are largely preserved for each choice, as are the final orientations of the adsorbed gas molecules. We find binding of CO2 to exceed that of CH4 by roughly a factor of two. However, the two gases follow very similar trends with changes in the attached functional group, despite different molecular symmetries. Our results indicate that the presence of NH2, H2PO3, NO2, and COOH functional groups can significantly enhance gas binding with respect to a hydrogen-passivated edge, making the edges potentially viable binding sites in materials with high concentrations of edge carbons. To first order, in-plane binding strength correlates with the larger permanent and induced dipole moments on these groups. Implications for tailoring carbon structures for increased gas uptake and improved CO2/CH4 selectivity are discussed.
△ Less
Submitted 6 March, 2012;
originally announced March 2012.