-
Temperature dependence of the Raman spectrum of orthorhombic Bi2Se3
Authors:
Irene Mediavilla-Martinez,
Christian Kramberger,
Shabnam Dadgostar,
Juan Jimenez,
Paola Ayala,
Thomas Pichler,
Francisco J. Manjon,
Placida Rodriguez-Hernandez,
Alfonso Muñoz,
Nadezhda Serebryanaya,
Sergei Buga,
Jorge Serrano
Abstract:
Bismuth selenide, a benchmark topological insulator, grows in a trigonal structure at ambient conditions and exhibits a number of enticing properties related to the formation of Dirac surface states. Besides this polytype, a metastable orthorhombic modification with Pnma space group has been produced by electrodeposition and high-pressure high-temperature synthesis displaying upon Sb do** signif…
▽ More
Bismuth selenide, a benchmark topological insulator, grows in a trigonal structure at ambient conditions and exhibits a number of enticing properties related to the formation of Dirac surface states. Besides this polytype, a metastable orthorhombic modification with Pnma space group has been produced by electrodeposition and high-pressure high-temperature synthesis displaying upon Sb do** significant thermoelectric properties in the midtemperature range. However, very little experimental information is available on the fundamental properties of this polytype, such as, e.g., the electronic band gap and the lattice dynamics. We report here the temperature dependence of the Raman spectra of orthorhombic Bi2Se3 between 10 K and 300 K, which displays an anharmonic behavior of the optical phonons that can be modelled with a two-phonon decay channel. In order to analyze the data we performed ab initio calculations of the electronic bandstructure, the phonon frequencies at the center of the Brillouin zone, and the phonon dispersion relations along the main symmetry directions, examining the effect of spin-orbit coupling in both phonon and electronic energies. Lastly, we report here cathodoluminescence experiments at 83 K that set a lower limit to the electronic bandgap at 0.835 eV, pointing to an indirect nature, in agreement with our calculations. These results shed light to essential properties of orthorhombic Bi2Se3 for further understanding of the potential of this semiconductor for thermoelectrics and new applications.
△ Less
Submitted 11 February, 2024;
originally announced February 2024.
-
Efficient Baseline for Quantitative Precipitation Forecasting in Weather4cast 2023
Authors:
Akshay Punjabi,
Pablo Izquierdo Ayala
Abstract:
Accurate precipitation forecasting is indispensable for informed decision-making across various industries. However, the computational demands of current models raise environmental concerns. We address the critical need for accurate precipitation forecasting while considering the environmental impact of computational resources and propose a minimalist U-Net architecture to be used as a baseline fo…
▽ More
Accurate precipitation forecasting is indispensable for informed decision-making across various industries. However, the computational demands of current models raise environmental concerns. We address the critical need for accurate precipitation forecasting while considering the environmental impact of computational resources and propose a minimalist U-Net architecture to be used as a baseline for future weather forecasting initiatives.
△ Less
Submitted 30 November, 2023;
originally announced November 2023.
-
CsCuCl3 perovskite-like compound under extreme conditions
Authors:
J. S. Rodríguez-Hernández,
Mayra. A. P. Gómez,
O. P. Furtado,
D. L. M. Vasconcelos,
A. P. Ayala,
C. W. A Paschoal,
Leonardo O. Kutelak,
Gustavo A. Lombardi,
Ricardo D. dos Reis
Abstract:
Halide perovskite has attracted intense research interest owing to its multifaceted and versatile applications in optoelectronics. This intrigue is further fueled by their propensity to undergo intricate structural modifications under extreme conditions, thereby instigating property changes. Within this context, our study delves deep into the intricate interplay of structural and vibrational attri…
▽ More
Halide perovskite has attracted intense research interest owing to its multifaceted and versatile applications in optoelectronics. This intrigue is further fueled by their propensity to undergo intricate structural modifications under extreme conditions, thereby instigating property changes. Within this context, our study delves deep into the intricate interplay of structural and vibrational attributes within the inorganic-metal halide perovskite-like CsCuCl3. Our approach employs Raman spectroscopy and Synchrotron Powder X-Ray Diffraction (SPXRD) techniques harnessed under the dual conditions of low temperatures and high pressures. We have observed a distinct spin-phonon coupling mechanism by employing Raman spectroscopy at low temperatures; this coupling has been manifested as a renormalization phonon phenomenon that occurs notably at T* = 15 K. The correlation between spin and phonon dynamics becomes pronounced through a notable hardening of phonon temperature dependence, a behavior intricately linked to the material antiferromagnetic transition at TN = 10.7 K. The SPXRD under high pressure showed a first-order structural phase transition (SPT) at the critical pressure Pc = 3.69 GPa, leading to the transformation from the hexagonal P6522 to a base-centered monoclinic cell. Notably, the coexistence of both phases is discernible within the pressure range from 2.79 to 3.57 GPa, indicating that the SPT involves the reorganization of the internal [Cu2Cl9]5- dimer unit, with the Cl-Cu-Cl bending contributing more than stretching modes. Furthermore, we demonstrate that the SPT is reversible, but residual strain pressure influences the modification of the critical pressure Pc value upon pressure decrease.
△ Less
Submitted 22 September, 2023;
originally announced September 2023.
-
HUVECs-encapsulation via Millimeter-sized Alginate Droplets
Authors:
Khanh Tran,
Brenda A. A. B. Ametepe,
Erika L. Gomez,
Daniel Ramos,
Clare Kim,
Ga-Young Kelly Suh,
Siavash Ahrar,
Perla Ayala
Abstract:
Droplet microfluidics are a powerful approach for hydrogel cell encapsulations. Much of the field has focused on single-cell encapsulations with pico-nanoliter droplet volumes necessary for single-cell sequencing or high-throughput screening. These small volumes, however, limit the use of hydrogel droplets for tissue engineering or cell therapies. We describe simple droplet microfluidics to genera…
▽ More
Droplet microfluidics are a powerful approach for hydrogel cell encapsulations. Much of the field has focused on single-cell encapsulations with pico-nanoliter droplet volumes necessary for single-cell sequencing or high-throughput screening. These small volumes, however, limit the use of hydrogel droplets for tissue engineering or cell therapies. We describe simple droplet microfluidics to generate millimeter-sized alginate droplets and demonstrate their use for cell encapsulations. This effort builds on our recent efforts, specifically by replacing the glass slide forming the bottom layer of the chamber with a more hydrophobic acrylic (PMMA) layer to improve the alginate-in-oil droplet formation. Using glass layer and PMMA layer devices, we characterized the tunable production of water-in-oil droplets (average droplet lengths ranged from 0.8 to 3.7 mm). Next, PMMA layer devices were used to demonstrate the tunable generation of alginate-in-oil droplets (average droplet lengths ranged from 3-6 mm). Increasing the flow ratio (Q.ratio = Q.oil/Q.alginate) led to more uniform droplets as measured by the coefficient of variance, which was approximately 5%. Finally, a proof-of-use experiment used HUVEC-encapsulated alginate droplets as part of a scratch-healing assay. Specifically, HUVEC-encapsulated droplets (AH droplets) led to the recovery of 3T3 fibroblast monolayers compared to no droplets or cell-free droplets (A droplets). Our results extended the use of simple microfluidics to generate and retrieve millimeter-sized alginate droplets for effective cell encapsulations.
△ Less
Submitted 14 September, 2023;
originally announced September 2023.
-
Microfluidics Generation of Millimeter-sized Matrigel Droplets
Authors:
Cory Arnold,
Gabriela Pena Carmona,
David A. Quiroz,
Chung X. Thai,
Brenda A. A. B. Ametepe,
I-Hung Khoo,
Melinda G. Simon,
Perla Ayala,
Siavash Ahrar
Abstract:
Significant progress has been made to increase access to droplet microfluidics for labs with limited microfluidics expertise or fabrication equipment. In particular, using off-the-shelf systems has been a valuable approach. However, the ability to modify a channel design and, thus, the functional characteristics of the system is of great value. In this work, we describe the development of co-flow…
▽ More
Significant progress has been made to increase access to droplet microfluidics for labs with limited microfluidics expertise or fabrication equipment. In particular, using off-the-shelf systems has been a valuable approach. However, the ability to modify a channel design and, thus, the functional characteristics of the system is of great value. In this work, we describe the development of co-flow microfluidics and their fabrication methods for generating uniform millimeter-sized (0.5 - 2 mm) hydrogel droplets. Two complementary approaches based on desktop CO2 laser cutting were developed to prototype and build durable co-flow droplet microfluidics. After demonstrating the co-flow systems, water-in-oil experiments and dimensionless number analysis were used to examine the operational characteristics of the system. Specifically, the Capillary number analysis indicated that millimeter-sized droplet generators operated in the desirable geometry-controlled regime despite their length scales being larger than traditional microfluidics systems. Next, the tunable generation of Matrigel droplets was demonstrated. By adjusting the relative flow rates, the droplet size could be tuned. Finally, we demonstrated fibroblast encapsulation and cell viability for up to 7 days as a proof-of-concept experiment. The systems presented are simple and effective tools to generate robust hydrogel droplets and increase the accessibility of this technology to teaching labs or research settings with limited resources or access to microfluidics.
△ Less
Submitted 30 May, 2023;
originally announced May 2023.
-
Ultra-clean isotope engineered double-walled carbon nanotubes as tailored hosts to trace the growth of carbyne
Authors:
Weili Cui,
Ferenc Simon,
Yifan Zhang,
Lei Shi,
Paola Ayala,
Thomas Pichler
Abstract:
Increasing attention is currently given to carbyne, the sp1 hybridized one-dimensional carbon allotrope, because of its predicted outstanding mechanical, optical, and electrical properties. Although recently substantial progress has been reported on confined carbyne synthesized inside double-walled carbon nanotubes (DWCNTs), its formation mechanism and precursors for growth remain elusive. Here, w…
▽ More
Increasing attention is currently given to carbyne, the sp1 hybridized one-dimensional carbon allotrope, because of its predicted outstanding mechanical, optical, and electrical properties. Although recently substantial progress has been reported on confined carbyne synthesized inside double-walled carbon nanotubes (DWCNTs), its formation mechanism and precursors for growth remain elusive. Here, we show a rational design of isotope engineered ultra-clean DWCNTs as tailored hosts to trace the growth of carbyne, which allows to identify the precursor and unravel the formation mechanism of carbyne during high-vacuum annealing at high-temperatures. Using this approach, ultra-clean DWCNTs with 80.4% 13C-enriched inner walls and outer tubes of naturally abundant served to unambiguously prove that only the carbonaceous materials inside the DWCNTs can act as precursors. The exchange of C atoms between inner and outer tubes happens without any growth of carbyne. After applying a secondary oxidation step, it is possible to produce the carbonaceous precursors from the partially oxidized DWCNTs. In this manner, not only carbyne with a record of ~28.8% 13C enrichment is grown, but concomitant healing, reorganization and regrowth of the DWCNTs occurs. This work enables to identify the precursor and trace the growth mechanism of confined carbyne with engineered properties. This is a crucial step, towards accessing the full application potential of confined carbyne hybrids by tailoring not only the isotopic fillers, but also the inner and outer tubes of the DWCNT hosts.
△ Less
Submitted 9 November, 2022;
originally announced November 2022.
-
Design rules for active control of narrowband thermal emission using phase-change materials
Authors:
Maxime Giteau,
Mitradeep Sarkar,
Maria Paula Ayala,
Michael T. Enders,
Georgia T. Papadakis
Abstract:
We propose an analytical framework to design actively tunable narrowband thermal emitters at infrared frequencies. We exemplify the proposed design rules using phase-change materials (PCM), considering dielectric-to-dielectric PCMs (e.g. GSST) and dielectric-to-metal PCMs (e.g. $\mathrm{VO_2}$). Based on these, we numerically illustrate near-unity ON-OFF switching and arbitrarily large spectral sh…
▽ More
We propose an analytical framework to design actively tunable narrowband thermal emitters at infrared frequencies. We exemplify the proposed design rules using phase-change materials (PCM), considering dielectric-to-dielectric PCMs (e.g. GSST) and dielectric-to-metal PCMs (e.g. $\mathrm{VO_2}$). Based on these, we numerically illustrate near-unity ON-OFF switching and arbitrarily large spectral shifting between two emission wavelengths, respectively. The proposed systems are lithography-free and consist of one or several thin emitter layers, a spacer layer which includes the PCM, and a back reflector. Our model applies to normal incidence, though we show that the behavior is essentially angle-independent. The presented formalism is general and can be extended to \textit{any} mechanism that modifies the optical properties of a material, such as electrostatic gating or thermo-optical modulation.
△ Less
Submitted 18 May, 2023; v1 submitted 5 October, 2022;
originally announced October 2022.
-
Efficient spatio-temporal weather forecasting using U-Net
Authors:
Akshay Punjabi,
Pablo Izquierdo Ayala
Abstract:
Weather forecast plays an essential role in multiple aspects of the daily life of human beings. Currently, physics based numerical weather prediction is used to predict the weather and requires enormous amount of computational resources. In recent years, deep learning based models have seen wide success in many weather-prediction related tasks. In this paper we describe our experiments for the Wea…
▽ More
Weather forecast plays an essential role in multiple aspects of the daily life of human beings. Currently, physics based numerical weather prediction is used to predict the weather and requires enormous amount of computational resources. In recent years, deep learning based models have seen wide success in many weather-prediction related tasks. In this paper we describe our experiments for the Weather4cast 2021 Challenge, where 8 hours of spatio-temporal weather data is predicted based on an initial one hour of spatio-temporal data. We focus on SmaAt-UNet, an efficient U-Net based autoencoder. With this model we achieve competent results whilst maintaining low computational resources. Furthermore, several approaches and possible future work is discussed at the end of the paper.
△ Less
Submitted 13 December, 2021;
originally announced December 2021.
-
Synthesis of nitrogen doped single wall carbon nanotubes with caffeine
Authors:
Filippo Fedi,
Oleg Domanov,
Paola Ayala,
Thomas Pichler
Abstract:
Nitrogen doped single wall carbon nanotubes have many functional benefits. Do** opens the possibility to control the electronic energy levels, surface energy, surface reactivity and charge carrier density. The additional electron in the outer shell changes the electronic properties of the nanotubes when introduced into the carbon lattice. Here we present the latest findings in the in-situ do**…
▽ More
Nitrogen doped single wall carbon nanotubes have many functional benefits. Do** opens the possibility to control the electronic energy levels, surface energy, surface reactivity and charge carrier density. The additional electron in the outer shell changes the electronic properties of the nanotubes when introduced into the carbon lattice. Here we present the latest findings in the in-situ do** during synthesis of single wall carbon nanotubes using caffeine as a precursor of both carbon and nitrogen. A special furnace with two heating elements allowed us to sublimate and decompose the solid precursor. Caffeine allowed us to reach a high do** percentage with high quality nanotubes directly in a one-step synthesis procedure.
△ Less
Submitted 29 January, 2021;
originally announced January 2021.
-
Oxidation stability of confined linear carbon chains, carbon nanotubes, and graphene nanoribbons as 1D nanocarbons
Authors:
Weili Cui,
Takeshi Saito,
Paola Ayala,
Thomas Pichler,
Lei Shi
Abstract:
Three typical one-dimensional (1D)/quasi-1D nanocarbons, linear carbon chains, carbon nanotubes, and graphene nanoribbons have been proven to grow inside single-wall carbon nanotubes. This gives rise to three types of hybrid materials whose behaviour and properties compared among each other are far from understood. After proving successful the synthesis of these nanostructured materials in recentl…
▽ More
Three typical one-dimensional (1D)/quasi-1D nanocarbons, linear carbon chains, carbon nanotubes, and graphene nanoribbons have been proven to grow inside single-wall carbon nanotubes. This gives rise to three types of hybrid materials whose behaviour and properties compared among each other are far from understood. After proving successful the synthesis of these nanostructured materials in recently published work, we have now been able to study their oxidation stability systematically by using resonance Raman spectroscopy. Surprisingly, the linear carbon chains, which have been theoretically predicted to be very unstable, are actually thermally stable up to 500 °C assisted by the protection of the carbon nanotube hosts. Besides, longer linear carbon chains inside narrower CNTs are more stable than the shorter ones inside larger tubes, suggesting that the thermal stability not only depends on the length of linear carbon chains alone, but it is correlated with the confinement of the host tubes in a more complicated manner. In addition, graphene nanoribbons come overall in view as the most stable confined structures. On the other hand, peculiarities like the higher stability of the (6,5) CNT over its (6,4) counterpart allow this study to provide a solid platform for further studies on the application of these 1D nanocarbons (including true 1D linear carbon chains) at ambient conditions.
△ Less
Submitted 27 January, 2021;
originally announced January 2021.
-
Templated direct growth of ultra-thin double-walled carbon nanotubes
Authors:
Lei Shi,
**quan Wei,
Kazuhiro Yanagi,
Takeshi Saito,
Kecheng Cao,
Ute Kaiser,
Paola Ayala,
Thomas Pichler
Abstract:
Double-walled carbon nanotubes (DWCNTs) combined the advantages of multi-walled (MW-) and single-walled (SW-) CNTs can be obtained by transforming the precursors (e.g. fullerene, ferrocene) into thin inner CNTs inside SWCNTs as templates. However, this method is limited since the DWCNT yield is strongly influenced by the filling efficiency (depending on the type of the filled molecules), opening a…
▽ More
Double-walled carbon nanotubes (DWCNTs) combined the advantages of multi-walled (MW-) and single-walled (SW-) CNTs can be obtained by transforming the precursors (e.g. fullerene, ferrocene) into thin inner CNTs inside SWCNTs as templates. However, this method is limited since the DWCNT yield is strongly influenced by the filling efficiency (depending on the type of the filled molecules), opening and cutting the SWCNTs, and the diameter of the host SWCNTs. Therefore, it cannot be applied to all types of SWCNT templates. Here we show a universal route to synthesize ultra-thin DWCNTs via making SWCNTs stable at high temperature in vacuum. This method applies to different types of SWCNTs including metallicity-sorted ones without using any precursors since the carbon sources were from the reconstructed SWCNTs and the residue carbons. The resulting DWCNTs are with high quality and the yield of inner tubes is comparable to/higher than that of the DWCNTs made from the transformation of ferrocene/fullerene peapods.
△ Less
Submitted 24 January, 2019;
originally announced January 2019.
-
Extraction of Linear Carbon Chains Unravels the Role of the Carbon Nanotube Host
Authors:
Lei Shi,
Kazuhiro Yanagi,
Kecheng Cao,
Ute Kaiser,
Paola Ayala,
Thomas Pichler
Abstract:
Linear carbon chains (LCCs) have been shown to grow inside double-walled carbon nanotubes (DWCNTs) but isolating them from this hosting material represents one of the most challenging tasks towards applications. Herein we report the extraction and separation of LCCs inside single-wall carbon nanotubes (LCCs@SWCNTs) extracted from a double walled host LCCs@DWCNTs by applying a combined tip-ultrason…
▽ More
Linear carbon chains (LCCs) have been shown to grow inside double-walled carbon nanotubes (DWCNTs) but isolating them from this hosting material represents one of the most challenging tasks towards applications. Herein we report the extraction and separation of LCCs inside single-wall carbon nanotubes (LCCs@SWCNTs) extracted from a double walled host LCCs@DWCNTs by applying a combined tip-ultrasonic and density gradient ultracentrifugation (DGU) process. High-resolution transmission electron microscopy (HRTEM), optical absorption, and Raman spectroscopy show that not only short LCCs but clearly long LCCs (LLCCs) can be extracted and separated from the host. Moreover, the LLCCs can even be condensed by DGU. The Raman spectral frequency of LCCs remains almost unchanged regardless of the presence of the outer tube of the DWCNTs. This suggests that the major importance of the outer tubes is making the whole synthesis viable. We have also been able to observe the interaction between the LCCs and the inner tubes of DWCNTs, playing a major role in modifying the optical properties of LCCs. Our extraction method suggests the possibility towards the complete isolation of LCCs from CNTs.
△ Less
Submitted 24 January, 2019;
originally announced January 2019.
-
Electronic band gaps of confined linear carbon chains ranging from polyyne to carbyne
Authors:
Lei Shi,
Philip Rohringer,
Marius Wanko,
Angel Rubio,
Sören Waßerroth,
Stephanie Reich,
Sofie Cambré,
Wim Wenseleers,
Paola Ayala,
Thomas Pichler
Abstract:
Ultra long linear carbon chains of more than 6000 carbon atoms have recently been synthesized within double-walled carbon nanotubes, and they show a promising new route to one--atom--wide semiconductors with a direct band gap. Theoretical studies predicted that this band gap can be tuned by the length of the chains, the end groups, and their interactions with the environment. However, different de…
▽ More
Ultra long linear carbon chains of more than 6000 carbon atoms have recently been synthesized within double-walled carbon nanotubes, and they show a promising new route to one--atom--wide semiconductors with a direct band gap. Theoretical studies predicted that this band gap can be tuned by the length of the chains, the end groups, and their interactions with the environment. However, different density functionals lead to very different values of the band gap of infinitely long carbyne. In this work, we applied resonant Raman excitation spectroscopy with more than 50 laser wavelengths to determine for the first time the band gap of long carbon chains encapsulated inside DWCNTs. The experimentally determined band gaps ranging from 2.253 to 1.848 eV follow a linear relation with Raman frequency. This lower bound is the smallest band gap of linear carbon chains observed so far. The comparison with experimental data obtained for short chains in gas phase or in solution demonstrates the effect of the DWCNT encapsulation, leading to an essential downshift of the band gap. This is explained by the interaction between the carbon chain and the host tube, which greatly modifies the chain's bond length alternation.
△ Less
Submitted 12 December, 2017; v1 submitted 5 May, 2017;
originally announced May 2017.
-
Nanoscale Magnetic Compasses
Authors:
Hidetsugu Shiozawa,
Desai Zhang,
Michael Eisterer,
Paola Ayala,
Thomas Pichler,
Martha R. McCartney,
David J. Smith
Abstract:
We have synthesized nanoscale magnetic compasses with high yield. These ferromagnetic iron carbide nano-particles, which are encapsulated in a pair of parallel carbon needles, change their direction in response to an external magnetic field. Electron holography reveals magnetic fields confined to the vicinity of the bicone-shaped particles, which are composed of few ferromagnetic domains. Aligned…
▽ More
We have synthesized nanoscale magnetic compasses with high yield. These ferromagnetic iron carbide nano-particles, which are encapsulated in a pair of parallel carbon needles, change their direction in response to an external magnetic field. Electron holography reveals magnetic fields confined to the vicinity of the bicone-shaped particles, which are composed of few ferromagnetic domains. Aligned magnetically and encapsulated in an acrylate polymer matrix, these nanocompasses exhibit anisotropic bulk magnetic permeability with an easy axis normal to the needle direction, that can be understood as a result of the anisotropic demagnetizing field of a nonspherical single-domain particle. This novel material with orthogonal magnetic and structural axes could be highly useful as magnetic components in electromagnetic wave absorbent materials and magnetorheological fluids.
△ Less
Submitted 3 March, 2017;
originally announced March 2017.
-
Disentangling Vacancy Oxidation on Metallicity-Sorted Carbon Nanotubes
Authors:
Duncan J. Mowbray,
Alejandro Pérez Paz,
Georgina Ruiz-Soria,
Markus Sauer,
Paolo Lacovig,
Matteo Dalmiglio,
Silvano Lizzit,
Kazuhiro Yanagi,
Andrea Goldoni,
Thomas Pichler,
Paola Ayala,
Angel Rubio
Abstract:
Pristine single-walled carbon nanotubes (SWCNTs) are rather inert to O$_2$ and N$_2$, which for low doses chemisorb only on defect sites or vacancies of the SWCNTs at the ppm level. However, very low do** has a major effect on the electronic properties and conductivity of the SWCNTs. Already at low O$_2$ doses (80 L), the X-ray photoelectron spectroscopy (XPS) O 1s signal becomes saturated, indi…
▽ More
Pristine single-walled carbon nanotubes (SWCNTs) are rather inert to O$_2$ and N$_2$, which for low doses chemisorb only on defect sites or vacancies of the SWCNTs at the ppm level. However, very low do** has a major effect on the electronic properties and conductivity of the SWCNTs. Already at low O$_2$ doses (80 L), the X-ray photoelectron spectroscopy (XPS) O 1s signal becomes saturated, indicating nearly all the SWCNT's vacancies have been oxidized. As a result, probing vacancy oxidation on SWCNTs via XPS yields spectra with rather low signal-to-noise ratios, even for metallicity-sorted SWCNTs. We show that, even under these conditions, the first principles density functional theory calculated Kohn-Sham O 1s binding energies may be used to assign the XPS O 1s spectra for oxidized vacancies on SWCNTs into its individual components. This allows one to determine the specific functional groups or bonding environments measured. We find the XPS O 1s signal is mostly due to three O-containing functional groups on SWCNT vacancies: epoxy (C$_2$$>$O), carbonyl (C$_2$$>$C$=$O), and ketene (C$=$C$=$O), as ordered by abundance. Upon oxidation of nearly all the SWCNT's vacancies, the central peak's intensity for the metallic SWCNT sample is 60\% greater than for the semiconducting SWCNT sample. This suggests a greater abundance of O-containing defect structures on the metallic SWCNT sample. For both metallic and semiconducting SWCNTs, we find O$_2$ does not contribute to the measured XPS O~1s spectra.
△ Less
Submitted 4 August, 2016;
originally announced August 2016.
-
Polyyne Electronic and Vibrational Properties under Environmental Interactions
Authors:
M. Wanko,
Seymur Cahangirov,
Lei Shi,
Philip Rohringer,
Zachary J. Lapin,
Lukas Novotny,
Paola Ayala,
Thomas Pichler,
Angel Rubio
Abstract:
Recently, the novel system of linear carbon chains inside of double-walled carbon nanotubes has extended the length of $sp^1$ hybridized carbon chains from 44 to thousands of atoms [L. Shi et al., Nat. Mater. 15, 634 (2016)]. The optoelectronic properties of these ultra-long chains are poorly described by current theoretical models, which are based on short chain experimental data and assume a con…
▽ More
Recently, the novel system of linear carbon chains inside of double-walled carbon nanotubes has extended the length of $sp^1$ hybridized carbon chains from 44 to thousands of atoms [L. Shi et al., Nat. Mater. 15, 634 (2016)]. The optoelectronic properties of these ultra-long chains are poorly described by current theoretical models, which are based on short chain experimental data and assume a constant environment. As such, a physical understanding of the system in terms of charge transfer and van der Waals interactions is widely missing. We provide a reference for the intrinsic Raman frequency of polyynes in vacuo and explicitly describe the interactions between polyynes and carbon nanotubes. We find that van der Waals interactions strongly shift the Raman frequency, which has been neither expected nor addressed before. As a consequence of charge transfer from the tube to the chain, the Raman response of long chains is qualitatively different from the known phonon dispersion of polymers close to the $Γ$-point. Based on these findings we show how to correctly interpret the Raman data, considering the nanotube's properties. This is essential for its use as an analytical tool to optimize the growth process for future applications.
△ Less
Submitted 9 August, 2016; v1 submitted 2 April, 2016;
originally announced April 2016.
-
On the bonding environment of phosphorus in purified doped single-walled carbon nanotubes
Authors:
Georgina Ruiz-Soria,
Toma Susi,
Markus Sauer,
Kazuhiro Yanagi,
Thomas Pichler,
Paola Ayala
Abstract:
In this work, phosphorous-doped single-walled carbon nanotubes have been synthesized by the thermal decomposition of trimethylphosphine using a high-vacuum chemical vapor deposition method. Furthermore, a modified density-gradient-ultracentrifugation process has been applied to carefully purify our doped material. The combined use of Raman and X-ray photoelectron spectroscopy allowed us to provide…
▽ More
In this work, phosphorous-doped single-walled carbon nanotubes have been synthesized by the thermal decomposition of trimethylphosphine using a high-vacuum chemical vapor deposition method. Furthermore, a modified density-gradient-ultracentrifugation process has been applied to carefully purify our doped material. The combined use of Raman and X-ray photoelectron spectroscopy allowed us to provide the first insight into the bonding environment of P incorporated into the carbon lattice, avoiding competing signals arising from synthesis byproducts. This study represents the first step toward the identification of the bonding configuration of P atoms when direct substitution takes place.
△ Less
Submitted 27 January, 2016;
originally announced January 2016.
-
Magnetoelectric Effects in the Spiral Magnets CuCl$_{2}$ and CuBr$_{2}$
Authors:
P. Tolédano,
A. P. Ayala,
A. F. G. Furtado Filho,
J. P. C. do Nascimento,
M. A. S. Silva,
A. S. B. Sombra
Abstract:
The nature and symmetry of the transition mechanisms in the spin-spiral copper halides CuCl$_2$ and CuBr$_2$ are analyzed theoretically. The magnetoelectric effects observed in the two multiferroic compounds are described and their phase diagram at zero and applied magnetic fields are worked out. The emergence of the electric polarization at zero field below the paramagnetic phase is shown to resu…
▽ More
The nature and symmetry of the transition mechanisms in the spin-spiral copper halides CuCl$_2$ and CuBr$_2$ are analyzed theoretically. The magnetoelectric effects observed in the two multiferroic compounds are described and their phase diagram at zero and applied magnetic fields are worked out. The emergence of the electric polarization at zero field below the paramagnetic phase is shown to result from the coupling of two distinct spin-density waves and to be only partly related to the Dzialoshinskii-Moriya interactions. Applying a magnetic field along the two-fold monoclinic axis of CuCl$_2$ yields a decoupling of the spin-density waves modifying the symmetry of the phase and the spin-spiral orientation. The remarkable periodic dependences of the magnetic susceptibility and polarization, on rotating the field in the monoclinic plane, are described theoretically.
△ Less
Submitted 28 September, 2015;
originally announced September 2015.
-
Raman and XPS analyses of pristine and annealed N-doped double-walled carbon nanotubes
Authors:
Lei Shi,
Markus Sauer,
Oleg Domanov,
Philip Rohringer,
Paola Ayala,
Thomas Pichler
Abstract:
N-doped single/multi-walled carbon nanotubes (CNTs) were studied for long time from synthesis to properties. However, the stability of N in the CNT lattice still needs further developments. In this work, to obtain more stable N-doped CNTs, concentric double-walled (DW) CNTs with more N were synthesized using benzylamine as C and N source. In order to test the stability of N-doped DWCNTs, high-temp…
▽ More
N-doped single/multi-walled carbon nanotubes (CNTs) were studied for long time from synthesis to properties. However, the stability of N in the CNT lattice still needs further developments. In this work, to obtain more stable N-doped CNTs, concentric double-walled (DW) CNTs with more N were synthesized using benzylamine as C and N source. In order to test the stability of N-doped DWCNTs, high-temperature annealing in vacuum was performed. By XPS and Raman spectroscopic measurements, we found that the N-doped DWCNTs are still stable under 1500 $\,^{\circ}\mathrm{C}$: the graphitic N does not change at all, the molecular N is partly removed, and the pyridinic N ratio greatly increases by more than two times. The reason could be that the N atoms from the surrounded N-contained materials combine into the CNT lattice during the annealing. Compared with the undoped DWCNTs, no Raman frequency shift was observed for the RBM, the G-band, and the G'-band of the N-doped DWCNTs.
△ Less
Submitted 7 September, 2015;
originally announced September 2015.
-
Confined linear carbon chains: A route to bulk carbyne
Authors:
Lei Shi,
Philip Rohringer,
Kazu Suenaga,
Yoshiko Niimi,
Jani Kotakoski,
Jannik C. Meyer,
Herwig Peterlik,
Paola Ayala,
Thomas Pichler
Abstract:
The extreme instability and strong chemical activity of carbyne, the infinite sp1 hybridized carbon chain, are responsible for its low possibility to survive in ambient conditions. Therefore, much less has been possible to explore about carbyne as compared to other novel carbon allotropes such as fullerenes, nanotubes and graphene. Although end-cap** groups can be used to stabilize carbon chains…
▽ More
The extreme instability and strong chemical activity of carbyne, the infinite sp1 hybridized carbon chain, are responsible for its low possibility to survive in ambient conditions. Therefore, much less has been possible to explore about carbyne as compared to other novel carbon allotropes such as fullerenes, nanotubes and graphene. Although end-cap** groups can be used to stabilize carbon chains, length limitation is still a barrier for its actual production, and even more for applications. Here, we report a novel route for bulk production of record long acetylenic linear carbon chains protected by thin double-walled carbon nanotubes. A corresponding extremely high Raman band is the first proof of a truly bulk yield formation of very long arrangements, which is unambiguously confirmed by transmission electron microscopy and near-field Raman spectroscopy. Our production establishes a way to exceptionally long stable carbon chains including more than 2300 carbon atoms, and an elegant forerunner towards the final goal of a bulk production of essentially infinite carbyne.
△ Less
Submitted 20 July, 2015; v1 submitted 17 July, 2015;
originally announced July 2015.
-
Calculation of the graphene C 1$\textit{s}$ core level binding energy
Authors:
Toma Susi,
Duncan J. Mowbray,
Mathias P. Ljungberg,
Paola Ayala
Abstract:
X-ray photoelectron spectroscopy (XPS) combined with first principles modeling is a powerful tool for determining the chemical composition and electronic structure of novel materials. Of these, graphene is an especially important model system for understanding the properties of other carbon nanomaterials. Here, we calculate the carbon 1$\textit{s}$ core level binding energy of pristine graphene us…
▽ More
X-ray photoelectron spectroscopy (XPS) combined with first principles modeling is a powerful tool for determining the chemical composition and electronic structure of novel materials. Of these, graphene is an especially important model system for understanding the properties of other carbon nanomaterials. Here, we calculate the carbon 1$\textit{s}$ core level binding energy of pristine graphene using two methods based on density functional theory total energy differences: a calculation with an explicit core-hole ($Δ$KS), and a novel all-electron extension of the delta self-consistent field ($Δ$SCF) method. We study systematically their convergence and computational workload, and the dependence of the energies on the chosen exchange-correlation functional. The $\mathrmΔ$SCF method is computationally more expensive, but gives consistently higher C 1$\textit{s}$ binding energies. Although there is a significant functional dependence, the binding energy calculated using the PBE functional is found to be remarkably close to what has been measured for graphite.
△ Less
Submitted 11 December, 2014; v1 submitted 14 November, 2014;
originally announced November 2014.
-
Spin-phonon and magnetostriction phenomena in CaMn7O12 helimagnet probed by Raman spectroscopy
Authors:
A. Nonatoa,
B. A. Souza,
A. P. Ayala,
A. P. Maciel,
S. Y. Villar,
M. S. Andujar,
A. Senaris-Rodrigues,
C. W. A. Paschoal
Abstract:
In this letter we investigated the temperature-dependent Raman spectra of CaMn7O12 helimagnet from room temperature down to 10 K. The temperature dependence of the Raman mode parameters show remarkable anomalies for both antiferromagnetic and incommensurate transitions that this compound undergoes at low temperatures. The anomalies observed at the magnetic ordering transition indicate a spin-phono…
▽ More
In this letter we investigated the temperature-dependent Raman spectra of CaMn7O12 helimagnet from room temperature down to 10 K. The temperature dependence of the Raman mode parameters show remarkable anomalies for both antiferromagnetic and incommensurate transitions that this compound undergoes at low temperatures. The anomalies observed at the magnetic ordering transition indicate a spin-phonon coupling at higher-temperature magnetic transition in this material, while a magnetostrinction effect at the lower-temperature magnetic transition.
△ Less
Submitted 30 September, 2014;
originally announced October 2014.
-
Role of rare-earth ionic radii on the spin-phonon coupling in multiferroic ordered double perovskites
Authors:
R. B. Macedo Filho,
D. A. B. Barbosa,
H. Reichlova,
X. Marti,
A. Menezes,
A. P. Ayala,
C. W. A. Paschoal
Abstract:
In this paper we investigated the influence of the rare-earth ionic radii on the spin-phonon coupling in RE2NiMnO6 double perovskites by Raman spectroscopy. Spin-phonon in dense Nd2NiMnO6 and Gd2NiMnO6 ceramics were investigated by Raman spectroscopy at low temperatures. The magnitude of the coupling observed in comparison with other isostructural compounds shows that it is not influenced by the r…
▽ More
In this paper we investigated the influence of the rare-earth ionic radii on the spin-phonon coupling in RE2NiMnO6 double perovskites by Raman spectroscopy. Spin-phonon in dense Nd2NiMnO6 and Gd2NiMnO6 ceramics were investigated by Raman spectroscopy at low temperatures. The magnitude of the coupling observed in comparison with other isostructural compounds shows that it is not influenced by the rare-earth ionic radius, as well as the deviation of the position of the stretching phonon in the ferromagnetic phase with relation to the anharmonic contributions follows a power law.
△ Less
Submitted 19 September, 2014; v1 submitted 11 September, 2014;
originally announced September 2014.
-
Silicon-carbon bond inversions driven by 60 keV electrons in graphene
Authors:
Toma Susi,
Jani Kotakoski,
Demie Kepaptsoglou,
Clemens Mangler,
Tracy C. Lovejoy,
Ondrej L. Krivanek,
Recep Zan,
Ursel Bangert,
Paola Ayala,
Jannik C. Meyer,
Quentin Ramasse
Abstract:
We demonstrate that 60 keV electron irradiation drives the diffusion of threefold coordinated Si dopants in graphene by one lattice site at a time. First principles simulations reveal that each step is caused by an electron impact on a C atom next to the dopant. Although the atomic motion happens below our experimental time resolution, stochastic analysis of 38 such lattice jumps reveals a probabi…
▽ More
We demonstrate that 60 keV electron irradiation drives the diffusion of threefold coordinated Si dopants in graphene by one lattice site at a time. First principles simulations reveal that each step is caused by an electron impact on a C atom next to the dopant. Although the atomic motion happens below our experimental time resolution, stochastic analysis of 38 such lattice jumps reveals a probability for their occurrence in a good agreement with the simulations. Conversions from three- to fourfold coordinated dopant structures and the subsequent reverse process are significantly less likely than the direct bond inversion. Our results thus provide a model of non-destructive and atomically precise structural modification and detection for two-dimensional materials.
△ Less
Submitted 17 July, 2014; v1 submitted 16 July, 2014;
originally announced July 2014.
-
Spin-phonon coupling in Gd(Co1/2Mn1/2)O3 perovskite
Authors:
R. X. Silva,
H. Reichlova,
X. Marti,
D. A. B. Barbosa,
M. W. Lufaso,
A. P. Ayala,
C. W. A. Paschoal
Abstract:
We have investigated the temperature-dependent Raman-active phonons and the magnetic properties of Gd(Co1/2Mn1/2)O3 perovskite ceramics in the temperature range from 40 K to 300 K. The samples crystallized in an orthorhombic distorted simple perovskite, whose symmetry belongs to the Pnma space group. The data reveals spin-phonon coupling near the ferromagnetic transition occurring at around 120 K.…
▽ More
We have investigated the temperature-dependent Raman-active phonons and the magnetic properties of Gd(Co1/2Mn1/2)O3 perovskite ceramics in the temperature range from 40 K to 300 K. The samples crystallized in an orthorhombic distorted simple perovskite, whose symmetry belongs to the Pnma space group. The data reveals spin-phonon coupling near the ferromagnetic transition occurring at around 120 K. The correlation of the Raman and magnetization data suggests that the structural order influences the magnitude of the spin-phonon coupling.
△ Less
Submitted 17 September, 2013; v1 submitted 4 September, 2013;
originally announced September 2013.
-
Spin-Phonon coupling in Y$_2$NiMnO$_6$ double perovskite probed by Raman spectroscopy
Authors:
Raimundo Bezerra Macedo Filho,
Alejandro Pedro Ayala,
Carlos William de Araujo Paschoal
Abstract:
We performed Raman spectroscopy measurements under temperature changes from 10 K up to 850 K to probe the phonon-spin coupling in Y$_2$NiMnO$_6$. The spin-phonon coupling was observed as a softening of the stretching mode, indicating this phonon stabilizes the magnetic interaction. The result indicates the rare earth ionic radius in Re$_2$NiMnO$_6$ double perovskites is not the unique parameter in…
▽ More
We performed Raman spectroscopy measurements under temperature changes from 10 K up to 850 K to probe the phonon-spin coupling in Y$_2$NiMnO$_6$. The spin-phonon coupling was observed as a softening of the stretching mode, indicating this phonon stabilizes the magnetic interaction. The result indicates the rare earth ionic radius in Re$_2$NiMnO$_6$ double perovskites is not the unique parameter influencing the spin-coupling magnitude.
△ Less
Submitted 27 April, 2013; v1 submitted 29 January, 2013;
originally announced January 2013.
-
Orbital and spin magnetic moments of transforming 1D iron inside metallic and semiconducting carbon nanotubes
Authors:
Antonio Briones-Leon,
Paola Ayala,
Xianjie Liu,
Hiromichi Kataura,
Kazuhiro Yanagi,
Eugen Weschke,
Michael Eisterer,
Thomas Pichler,
Hidetsugu Shiozawa
Abstract:
The orbital and spin magnetic properties of iron inside transforming metallic and semiconducting 1D carbon nanotube hybrids are studied by means of local x-ray magnetic circular dichroism (XMCD) and bulk superconducting quantum interference device (SQUID) measurements. Nanotube hybrids are initially ferrocene filled single-walled carbon nanotubes (SWCNT) of different metallicities. After a high te…
▽ More
The orbital and spin magnetic properties of iron inside transforming metallic and semiconducting 1D carbon nanotube hybrids are studied by means of local x-ray magnetic circular dichroism (XMCD) and bulk superconducting quantum interference device (SQUID) measurements. Nanotube hybrids are initially ferrocene filled single-walled carbon nanotubes (SWCNT) of different metallicities. After a high temperature nanochemical reaction ferrocene molecules react with each other to form iron nano clusters. We show that the ferrocenes molecular orbitals interact differently with the SWCNT of different metallicities without significant XMCD response. This XMCD at various temperatures and magnetic fields reveals that the orbital and/or spin magnetic moments of the encapsulated iron are altered drastically as the transformation to 1D Fe nanoclusters takes place. The orbital and spin magnetic moments are both found to be larger in filled semiconducting nanotubes than in the metallic sample. This could mean that the magnetic polarizations of the encapsulated material is dependent on the metallicity of the tubes. From a comparison between the iron 3d magnetic moments and the bulk magnetism measured by SQUID, we conclude that the delocalized magnetisms dictate the magnetic properties of these 1D hybrid nanostructures.
△ Less
Submitted 19 September, 2012;
originally announced September 2012.
-
Far Infrared Slab Lensing and Subwavelength Imaging in Crystal Quartz
Authors:
R. Estevâm da Silva,
R. Macêdo,
T. Dumelow,
J. A. P. da Costa,
S. B. Honorato,
A. P. Ayala
Abstract:
We examine the possibility of using negative refraction stemming from the phonon response in an anisotropic crystal to create a simple slab lens with plane parallel sides, and show that imaging from such a lens should be possible at room temperature despite the effects of absorption that are inevitably present due to phonon dam**. In particular, we consider the case of crystal quartz, a system f…
▽ More
We examine the possibility of using negative refraction stemming from the phonon response in an anisotropic crystal to create a simple slab lens with plane parallel sides, and show that imaging from such a lens should be possible at room temperature despite the effects of absorption that are inevitably present due to phonon dam**. In particular, we consider the case of crystal quartz, a system for which experimental measurements consistent with all-angle negative refraction have already been demonstrated. Furthermore, we investigate the possibility of subwavelength imaging from such materials, and show that it should be possible for certain configurations.
△ Less
Submitted 19 November, 2012; v1 submitted 15 July, 2012;
originally announced July 2012.
-
Theoretical spectroscopy techniques applied to graphene EELS and optics
Authors:
D. J. Mowbray,
P. Ayala,
V. Despoja,
T. Pichler,
A. Rubio
Abstract:
A thorough understanding of the electronic structure is a necessary first step for the design of nanoelectronics, chemical/bio-sensors, electrocatalysts, and nanoplasmonics using graphene. As such, theoretical spectroscopic techniques to describe both direct optical excitations and collective excitations of graphene are of fundamental importance. Starting from density functional theory (DFT) we us…
▽ More
A thorough understanding of the electronic structure is a necessary first step for the design of nanoelectronics, chemical/bio-sensors, electrocatalysts, and nanoplasmonics using graphene. As such, theoretical spectroscopic techniques to describe both direct optical excitations and collective excitations of graphene are of fundamental importance. Starting from density functional theory (DFT) we use the time dependent linear response within the random phase approximation (TDDFT-RPA) to describe the loss function -Im{ε\overline{ }^{1}(q,ω)} for graphene. To ensure any spurious interactions between layers are neglected, we employ both a radial cutoff of the Coulomb kernel, and extra vacuum directly at the TDDFT-RPA level.
△ Less
Submitted 2 May, 2011;
originally announced May 2011.
-
Raman studies of polycrystalline CaCu$_3$Ti$_4$O$_{12}$ under high-pressure
Authors:
D. Valim,
A. G. Souza Filho,
P. T. C. Freire,
A. P. Ayala,
J. Mendes Filho,
A. F. L. Almeida,
P. B. A. Fechine,
A. S. B. Sombra
Abstract:
We report a Raman scattering study of polycrystalline CaCu$_3$Ti$_4$O$_{12}$ (CCTO) under pressure up to 5.32 GPa. The pressure dependence of several Raman modes was investigated. No anomalies have been observed on the phonon spectra thereby indicating that the T$_{h}$ (Im$\bar 3$) structure remains stable for pressures up to 5.32 GPa. The pressure coefficients for the observed modes were determ…
▽ More
We report a Raman scattering study of polycrystalline CaCu$_3$Ti$_4$O$_{12}$ (CCTO) under pressure up to 5.32 GPa. The pressure dependence of several Raman modes was investigated. No anomalies have been observed on the phonon spectra thereby indicating that the T$_{h}$ (Im$\bar 3$) structure remains stable for pressures up to 5.32 GPa. The pressure coefficients for the observed modes were determined. This set of parameters was used for evaluating the stress developed in CCTO thin films.
△ Less
Submitted 17 December, 2003;
originally announced December 2003.
-
Low Temperature Phase Transition in Sr(0.66)Ba(0.34)Nb2O6 single Crystal Fibers
Authors:
J. L. B. Faria,
C. W. A. Paschoal,
P. T. C. Freire,
A. P. Ayala,
F. E. A. Melo,
J. Mendes Filho,
I. A. Santos,
J. A. Eiras
Abstract:
The structural changes in Sr(0.66)Ba(0.34)Nb2O6 single crystal fibers when the temperature decreases from 295 to 10 K is investigated by dielectric constant measurements and Raman spectroscopy. The anomaly observed in the plot of e is associated to the variation in the intensity and frequency of some Raman modes. We observe that the intensity of some low energy modes has a very singular behavior…
▽ More
The structural changes in Sr(0.66)Ba(0.34)Nb2O6 single crystal fibers when the temperature decreases from 295 to 10 K is investigated by dielectric constant measurements and Raman spectroscopy. The anomaly observed in the plot of e is associated to the variation in the intensity and frequency of some Raman modes. We observe that the intensity of some low energy modes has a very singular behavior for the y(xz)y scattering geometry. In the high energy region (> 850 cm-1), a band at ~ 880 cm-1 disappears when the temperature is cooled down to 10K for the y(xz)y geometry and shifts to higher energy values for the y(zz)y geometry.
△ Less
Submitted 21 August, 2001;
originally announced August 2001.
-
A Raman Study of Morphotropic Phase Boundary in PbZr1-xTixO3 at low temperatures
Authors:
K. C. V. Lima,
A. G. Souza,
A. P. Ayala,
J. Mendes Filho,
P. T. C. Freire,
F. E. A. Melo,
E. B. Araújo,
J. A. Eiras
Abstract:
Raman spectra of PbZr1-xTixO3 ceramics with titanium concentration varying between 0.40 and 0.60 were measured at 7 K. By observing the concentration-frequency dependence of vibrational modes, we identified the boundaries among rhombohedral, monoclinic, and tetragonal ferroelectric phases. The analysis of the spectra was made in the view of theory group analysis making possible the assignment of…
▽ More
Raman spectra of PbZr1-xTixO3 ceramics with titanium concentration varying between 0.40 and 0.60 were measured at 7 K. By observing the concentration-frequency dependence of vibrational modes, we identified the boundaries among rhombohedral, monoclinic, and tetragonal ferroelectric phases. The analysis of the spectra was made in the view of theory group analysis making possible the assignment of some modes for the monoclinic phase.
△ Less
Submitted 30 August, 2000;
originally announced August 2000.
-
Electric Field Induced Phase Transition in KDP Crystal Near Curie Point: Raman and X-ray Scattering Studies
Authors:
A. T. Varela,
J. M. Sasaki,
I. Guedes,
P. T. C. Freire,
A. P. Ayala,
J. Mendes Filho,
F. E. A. Melo,
A. S. Chaves
Abstract:
X-ray scattering measurements are performed in order to verify % that the mechanism leading to the DC electric field induced $C_{2v}^{19} \to C_{2v}^{\neq 19}$ phase transition in KDP crystal at 119 K is the changing of the local sites symmetries of phosphate group from $C_2$ in the $C_{2v}^{19}$ phase to $C_s$ in the $C_{2v}^{\neq 19}$ phase. It is shown by analyzing the integrated intensity of…
▽ More
X-ray scattering measurements are performed in order to verify % that the mechanism leading to the DC electric field induced $C_{2v}^{19} \to C_{2v}^{\neq 19}$ phase transition in KDP crystal at 119 K is the changing of the local sites symmetries of phosphate group from $C_2$ in the $C_{2v}^{19}$ phase to $C_s$ in the $C_{2v}^{\neq 19}$ phase. It is shown by analyzing the integrated intensity of the (800) and (080) reflections that under DC electric field the density of oxygen atoms lying on these plane changes indicating that phosphate group rotates around the [010] direction relative to the orthorhombic $C_{2v}^{19}$ structure. Some Raman results are also discussed.
△ Less
Submitted 25 January, 2000;
originally announced January 2000.
-
High-pressure Raman study of L-alanine crystal
Authors:
A. M. R. Teixeira,
P. T. C. Freire,
A. J. D. Moreno,
J. M. Sasaki,
A. P. Ayala,
J. Mendes Filho,
F. E. A. Melo
Abstract:
Pressure-dependent Raman scattering studies in the range 0.0 -- 32 kbar were carried out in L-alanine in order to investigate its external mode phonon spectra in relation to the phase transitions in the crystal. A careful analysis of the spectra shows that the low-energy Raman modes exhibit variation both in frequency and in intensity and between 26 and 28 kbar it is observed a splitting of a ex…
▽ More
Pressure-dependent Raman scattering studies in the range 0.0 -- 32 kbar were carried out in L-alanine in order to investigate its external mode phonon spectra in relation to the phase transitions in the crystal. A careful analysis of the spectra shows that the low-energy Raman modes exhibit variation both in frequency and in intensity and between 26 and 28 kbar it is observed a splitting of a external mode, indicating that the D_2 normal phase undergoes a transition. Pressure coefficients for external modes are also given.
△ Less
Submitted 14 January, 2000;
originally announced January 2000.
-
Concentration-Pressure phase diagram for rich Zr PZT ceramics
Authors:
A. G. Souza Filho,
P. T. C. Freire,
A. P. Ayala,
J. M. Sasaki,
I. Guedes,
J. Mendes Filho,
F. E. A. Melo,
E. B. Araújo,
J. A. Eiras
Abstract:
This work reports on the systematic high pressure Raman studies in the PbZr$_{1-x}$Ti$_x$O$_3$ ($0.02 \leq x \leq 0.14$) ceramics performed at room temperature. The pressure dependence of the Raman spectra reveals the stable phases of the material under pressure variation. The results allowed us to propose a concentration-pressure phase diagram for rich Zr PZT system up to pressures of 5.0 GPa.
This work reports on the systematic high pressure Raman studies in the PbZr$_{1-x}$Ti$_x$O$_3$ ($0.02 \leq x \leq 0.14$) ceramics performed at room temperature. The pressure dependence of the Raman spectra reveals the stable phases of the material under pressure variation. The results allowed us to propose a concentration-pressure phase diagram for rich Zr PZT system up to pressures of 5.0 GPa.
△ Less
Submitted 8 January, 2000;
originally announced January 2000.
-
The monoclinic phase of PZT ceramics: Raman and phenomenological theory studies
Authors:
A. G. Souza Filho,
K. C. V. Lima,
A. P. Ayala,
I. Guedes,
P. T. C. Freire,
J. Mendes Filho,
E. B. Araújo,
J. A. Eiras
Abstract:
This work reports on the first Raman detection of the tetragonal to monoclinic phase transition in PZT ceramics near morphotropic phase boundary at low temperatures. The transition is characterized by changes in the frequency of lattice modes with the temperature. The results presented here confirm the previous one recently reported by Noheda et al. using high-resolution synchrotron X-ray powder…
▽ More
This work reports on the first Raman detection of the tetragonal to monoclinic phase transition in PZT ceramics near morphotropic phase boundary at low temperatures. The transition is characterized by changes in the frequency of lattice modes with the temperature. The results presented here confirm the previous one recently reported by Noheda et al. using high-resolution synchrotron X-ray powder diffraction technique and dielectric measurements. The stability of the new phase is discussed within the framework of phenomenological Landau-Devonshire Theory.
△ Less
Submitted 30 September, 1999; v1 submitted 3 September, 1999;
originally announced September 1999.