Showing 1–9 of 9 results for author: Avvisati, G

Narrowing of d bands of FeCo layers intercalated under graphene

Authors: Daniela Pacilè, Claudia Cardoso, Giulia Avvisati, Ivana Vobornik, Carlo Mariani, Dario A. Leon, Pietro Bonfà, Daniele Varsano, Andrea Ferretti, Maria Grazia Betti

Abstract: We report on the electronic properties of an artificial system obtained by the intercalation of equiatomic FeCo layers under graphene grown on Ir(111). Upon intercalation, the FeCo film grows epitaxially on Ir(111), resulting in a lattice-mismatched system. By performing Density Functional Theory calculations, we show that the intercalated FeCo layer leads to a pronounced corrugation of the graphe… ▽ More We report on the electronic properties of an artificial system obtained by the intercalation of equiatomic FeCo layers under graphene grown on Ir(111). Upon intercalation, the FeCo film grows epitaxially on Ir(111), resulting in a lattice-mismatched system. By performing Density Functional Theory calculations, we show that the intercalated FeCo layer leads to a pronounced corrugation of the graphene film. At the same time, the FeCo intercalated layers induce a clear transition from a nearly undisturbed to a strongly hybridized graphene π-band, as measured by angle-resolved photoemission spectroscopy. A comparison of experimental results with the computed band structure and the projected density of states unveils a spin-selective hybridization between the π band of graphene and FeCo-3d states. Our results demonstrate that the reduced dimensionality, as well as the hybridization within the FeCo layers, induce a narrowing and a clear splitting of Fe 3d-up and Fe 3d-down spin bands of the confined FeCo layers with respect to bulk Fe and Co. △ Less

Submitted 29 March, 2021; originally announced March 2021.

Comments: 5 pages, 4 figures

Journal ref: Appl. Phys. Lett. 118, 121602, 2021

Magnetic response and electronic states of well defined Graphene/Fe/Ir(111) heterostructure

Authors: Claudia Cardoso, Giulia Avvisati, Pierluigi Gargiani, Marco Sbroscia, Madan S. Jagadeesh, Carlo Mariani, Dario A. Leon, Daniele Varsano, Andrea Ferretti, Maria Grazia Betti

Abstract: We investigate a well defined heterostructure constituted by magnetic Fe layers sandwiched between graphene (Gr) and Ir(111). The challenging task to avoid Fe-C solubility and Fe-Ir intermixing has been achieved with atomic controlled Fe intercalation at moderate temperature below 500 K. Upon intercalation of a single ordered Fe layer in registry with the Ir substrate, an intermixing of the Gr ban… ▽ More We investigate a well defined heterostructure constituted by magnetic Fe layers sandwiched between graphene (Gr) and Ir(111). The challenging task to avoid Fe-C solubility and Fe-Ir intermixing has been achieved with atomic controlled Fe intercalation at moderate temperature below 500 K. Upon intercalation of a single ordered Fe layer in registry with the Ir substrate, an intermixing of the Gr bands and Fe d states breaks the symmetry of the Dirac cone, with a downshift in energy of the apex by about 3 eV, and well-localized Fe intermixed states induced in the energy region just below the Fermi level. First principles electronic structure calculations show a large spin splitting of the Fe states, resulting in a majority spin channel almost fully occupied and strongly hybridized with Gr π states. X-ray magnetic circular dichroism on the Gr/Fe/Ir heterostructure reveals an ordered spin configuration with a ferromagnetic response of Fe layer(s), with enhanced spin and orbital configurations with respect to the bcc-Fe bulk values. The magnetization switches from a perpendicular easy magnetization axis when the Fe single layer is lattice matched with the Ir(111) surface to a parallel one when the Fe thin film is almost commensurate with graphene. △ Less

Submitted 14 January, 2021; originally announced January 2021.

Journal ref: Physical Review Materials 5, 014405 (2021)

Ferromagnetic and Antiferromagnetic Coupling of Spin Molecular Interfaces with High Thermal Stability

Authors: Giulia Avvisati, Claudia Cardoso, Daniele Varsano, Andrea Ferretti, Pierluigi Gargiani, Maria Grazia Betti

Abstract: We report an advanced organic spin-interface architecture with magnetic remanence at room temperature, constituted by metal phthalocyanine molecules magnetically coupled with Co layer(s), mediated by graphene. Fe- and Cu-phthalocyanines assembled on graphene/Co have identical structural configurations, but FePc couples antiferromagnetically with Co up to room temperature, while CuPc couples ferrom… ▽ More We report an advanced organic spin-interface architecture with magnetic remanence at room temperature, constituted by metal phthalocyanine molecules magnetically coupled with Co layer(s), mediated by graphene. Fe- and Cu-phthalocyanines assembled on graphene/Co have identical structural configurations, but FePc couples antiferromagnetically with Co up to room temperature, while CuPc couples ferromagnetically with weaker coupling and thermal stability, as deduced by element-selective X-ray magnetic circular dichroic signals. The robust antiferromagnetic coupling is stabilized by a superexchange interaction, driven by the out-of-plane molecular orbitals responsible of the magnetic ground state and electronically decoupled from the underlying metal via the graphene layer, as confirmed by ab initio theoretical predictions. These archetypal spin interfaces can be prototypes to demonstrate how antiferromagnetic and/or ferromagnetic coupling can be optimized by selecting the molecular orbital symmetry. △ Less

Submitted 15 October, 2018; originally announced October 2018.

Comments: This document is the Accepted Manuscript version of a Published Work that appeared in final form in Nano. Lett. copyright American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see http://dx.doi.org/10.1021/acs.nanolett.7b04836

Journal ref: Nano Lett., 2018, 18 (4), pp 2268

FePc Adsorption on the Moiré Superstructure of Graphene Intercalated with a Co Layer

Authors: Giulia Avvisati, Simone Lisi, Pierluigi Gargiani, Ada Della Pia, Oreste De Luca, Daniela Pacilé, Claudia Cardoso, Daniele Varsano, Deborah Prezzi, Andrea Ferretti, Maria Grazia Betti

Abstract: The moiré superstructure of graphene grown on metals can drive the assembly of molecular architectures, as iron-phthalocyanine (FePc) molecules, allowing for the production of artificial molecular configurations. A detailed analysis of the Gr/Co interaction upon intercalation (including a modelling of the resulting moiré pattern) is performed here by density functional theory, which provides an ac… ▽ More The moiré superstructure of graphene grown on metals can drive the assembly of molecular architectures, as iron-phthalocyanine (FePc) molecules, allowing for the production of artificial molecular configurations. A detailed analysis of the Gr/Co interaction upon intercalation (including a modelling of the resulting moiré pattern) is performed here by density functional theory, which provides an accurate description of the template as a function of the corrugation parameters. The theoretical results are a preliminary step to describe the interaction process of the FePc molecules adsorption on the Gr/Co system. Core level photoemission and absorption spectroscopies have been employed to control the preferential adsorption regions of the FePc on the graphene moiré superstructure and the interaction of the central Fe ion with the underlying Co. Our results show that upon molecular adsorption the distance of C atoms from the Co template mainly drives the strength of the molecules-substrate interaction, thereby allowing for locally different electronic properties within the corrugated interface. △ Less

Submitted 29 May, 2018; originally announced May 2018.

Comments: This document is the Accepted Manuscript version of a Published Work that appeared in final form in J. Phys. Chem. C , copyright \c{opyright} American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see http://dx.doi.org/10.1021/acs.jpcc.6b09875

Journal ref: J. Phys. Chem. C, 2017, 121, 1639

Electronic Structure Evolution during the Growth of Graphene Nanoribbons on Au(110)

Authors: Ada Della Pia, Giulia Avvisati, Oualid Ourd**i, Claudia Cardoso, Daniele Varsano, Deborah Prezzi, Andrea Ferretti, Carlo Mariani, Maria Grazia Betti

Abstract: Surface-assisted polymerization of molecular monomers into extended chains can be used as the seed of graphene nanoribbon (GNR) formation, resulting from a subsequent cyclo-dehydrogenation process. By means of valence-band photoemission and ab-initio density-functional theory (DFT) calculations, we investigate the evolution of molecular states from monomer 10,10'-dibromo-9,9'bianthracene (DBBA) pr… ▽ More Surface-assisted polymerization of molecular monomers into extended chains can be used as the seed of graphene nanoribbon (GNR) formation, resulting from a subsequent cyclo-dehydrogenation process. By means of valence-band photoemission and ab-initio density-functional theory (DFT) calculations, we investigate the evolution of molecular states from monomer 10,10'-dibromo-9,9'bianthracene (DBBA) precursors to polyanthryl polymers, and eventually to GNRs, as driven by the Au(110) surface. The molecular orbitals and the energy level alignment at the metal-organic interface are studied in depth for the DBBA precursors deposited at room temperature. On this basis, we can identify a spectral fingerprint of C-Au interaction in both DBBA single-layer and polymerized chains obtained upon heating. Furthermore, DFT calculations help us evidencing that GNRs interact more strongly than DBBA and polyanthryl with the Au(110) substrate, as a result of their flatter conformation. △ Less

Submitted 20 April, 2017; originally announced April 2017.

Comments: This document is the Accepted Manuscript version of a Published Work that appeared in final form in J. Phys. Chem C after peer review and technical editing by the publisher. To access the final edited and published work see: http://pubsdc3.acs.org/articlesonrequest/AOR-IB49uBxIS3X6JdF3ieQ9

Journal ref: J. Phys. Chem. C 120, 7323 (2016)

Fabrication of colloidal Laves phases via hard tetramers and hard spheres: bulk phase diagram and sedimentation behaviour

Authors: Guido Avvisati, Tonnishtha Dasgupta, Marjolein Dijkstra

Abstract: Colloidal photonic crystals display peculiar optical properties which make them particularly suitable for application in different fields. However, the low packing fraction of the targeted structures usually poses a real challenge in the fabrication stage. Here, we propose a novel route to colloidal photonic crystals via a binary mixture of hard tetramers and hard spheres. By combining theory and… ▽ More Colloidal photonic crystals display peculiar optical properties which make them particularly suitable for application in different fields. However, the low packing fraction of the targeted structures usually poses a real challenge in the fabrication stage. Here, we propose a novel route to colloidal photonic crystals via a binary mixture of hard tetramers and hard spheres. By combining theory and computer simulations, we calculate the phase diagram as well as the stacking diagram of the mixture, and show that a colloidal analogue of the MgCu2 Laves phase -- which can serve as a precursor of a photonic bandgap structure -- is a thermodynamically stable phase in a large region of the phase diagram. Our findings show a relatively large coexistence region between the fluid and the Laves phase, which is potentially accessible by experiments. Furthermore, we determine the sedimentation behaviour of the suggested mixture, by identifying several stacking sequences. Our work uncovers a new self-assembly path towards a photonic structure with a band gap in the visible region. △ Less

Submitted 8 February, 2017; v1 submitted 24 March, 2016; originally announced March 2016.

Phase Separation and Self-Assembly in a Fluid of Mickey Mouse Particles

Authors: Guido Avvisati, Marjolein Dijkstra

Abstract: Recent developments in the synthesis of colloidal particles allow for control over shape and inter-particle interaction. One example, among others, is the so-called "Mickey Mouse" (MM) particle for which the self-assembly properties have been previously studied yielding a stable cluster phase together with elongated, tube-like structures. Here, we investigate under which conditions a fluid of Mick… ▽ More Recent developments in the synthesis of colloidal particles allow for control over shape and inter-particle interaction. One example, among others, is the so-called "Mickey Mouse" (MM) particle for which the self-assembly properties have been previously studied yielding a stable cluster phase together with elongated, tube-like structures. Here, we investigate under which conditions a fluid of Mickey Mouse particles can yield phase separation and how the self-assembly behaviour affects the gas-liquid coexistence. We vary the distance between the repulsive and the attractive lobes (bond length), and the interaction range, and follow the evolution of the gas-liquid (GL) coexistence curve. We find that upon increasing the bond length distance the binodal line shifts to lower temperatures, and that the interaction range controls the transition between phase separation and self-assembly of clusters. Upon further reduction of the interaction range and temperature, the clusters assume an increasingly ordered tube-like shape, ultimately matching the one previously reported in literature. These results are of interest when designing particle shape and particle-particle interaction for self-assembly processes. △ Less

Submitted 20 August, 2015; originally announced August 2015.

Self-assembly of "Mickey Mouse" shaped colloids into tube-like structures: experiments and simulations

Authors: Joost R. Wolters, Guido Avvisati, Fabian Hagemans, Teun Vissers, Daniela J. Kraft, Marjolein Dijkstra, Willem K. Kegel

Abstract: The self-assembly of anisotropic patchy particles with triangular shape was studied by experiments and computer simulations. The colloidal particles were synthesized in a two-step seeded emulsion polymerization process, and consist of a central smooth lobe connected to two rough lobes at an angle of $\sim$90$^{\circ}$, resembling the shape of a "Mickey Mouse" head. Due to the difference in overlap… ▽ More The self-assembly of anisotropic patchy particles with triangular shape was studied by experiments and computer simulations. The colloidal particles were synthesized in a two-step seeded emulsion polymerization process, and consist of a central smooth lobe connected to two rough lobes at an angle of $\sim$90$^{\circ}$, resembling the shape of a "Mickey Mouse" head. Due to the difference in overlap volume, adding an appropriate depletant induces an attractive interaction between the smooth lobes of the colloids only, while the two rough lobes act as steric constraints. The essentially planar geometry of the "Mickey Mouse" particles is a first geometric deviation of dumbbell shaped patchy particles. This new geometry is expected to form one-dimensional tube-like structures rather than spherical, essentially zero-dimensional micelles. At sufficiently strong attractions, we indeed find tube-like structures with the sticky lobes at the core and the non-sticky lobes pointing out as steric constraints that limit the growth to one direction, providing the tubes with a well-defined diameter but variable length both in experiments and simulations. In the simulations, we found that the internal structure of the tubular fragments could either be straight or twisted into so-called Bernal spirals. △ Less

Submitted 10 December, 2014; originally announced December 2014.

Self-Assembly of Patchy Colloidal Dumbbells

Authors: Guido Avvisati, Teun Vissers, Marjolein Dijkstra

Abstract: We employ Monte Carlo simulations to investigate the self-assembly of patchy colloidal dumbbells interacting via a modified Kern-Frenkel potential by probing the system concentration and dumbbell shape. We consider dumbbells consisting of one attractive sphere with diameter $σ_1$ and one repulsive sphere with diameter $σ_2$ and center-to-center distance $d$ between the spheres. For three different… ▽ More We employ Monte Carlo simulations to investigate the self-assembly of patchy colloidal dumbbells interacting via a modified Kern-Frenkel potential by probing the system concentration and dumbbell shape. We consider dumbbells consisting of one attractive sphere with diameter $σ_1$ and one repulsive sphere with diameter $σ_2$ and center-to-center distance $d$ between the spheres. For three different size ratios, we study the self-assembled structures for different separations $l = 2d/(σ_1+σ_2)$ between the two spheres. In particular, we focus on structures that can be assembled from the homogeneous fluid, as these might be of interest in experiments. We use cluster order parameters to classify the shape of the formed structures. When the size of the spheres is almost equal, $q=σ_2/σ_1=1.035$, we find that, upon increasing $l$, spherical micelles are transformed to elongated micelles and finally to vesicles and bilayers. For size ratio $q=1.25$ we observe a continuously tunable transition from spherical to elongated micelles upon increasing the sphere separation. For size ratio $q=0.95$ we find bilayers and vesicles, plus faceted polyhedra and liquid droplets. Our results identify key parameters to create colloidal vesicles with attractive dumbbells in experiments. △ Less

Submitted 5 December, 2014; originally announced December 2014.