-
New compound and hybrid binding energy sputter model for modeling purposes in agreement with experimental data
Authors:
Noah Jäggi,
Andreas Mutzke,
Herbert Biber,
Johannes Brötzner,
Paul Stefan Szabo,
Friedrich Aumayr,
Peter Wurz,
André Galli
Abstract:
Rocky planets and moons experiencing solar wind sputtering are continuously supplying their envelo** exosphere with ejected neutral atoms. To understand the quantity and properties of the ejecta, well established Binary Collision Approximation Monte Carlo codes like TRIM with default settings are used predominantly. Improved models such as SDTrimSP have come forward and together with new experim…
▽ More
Rocky planets and moons experiencing solar wind sputtering are continuously supplying their envelo** exosphere with ejected neutral atoms. To understand the quantity and properties of the ejecta, well established Binary Collision Approximation Monte Carlo codes like TRIM with default settings are used predominantly. Improved models such as SDTrimSP have come forward and together with new experimental data the underlying assumptions have been challenged. We introduce a hybrid model, combining the previous surface binding approach with a new bulk binding model akin to Hofsäss & Stegmaier (2023). In addition, we expand the model implementation by distinguishing between free and bound components sourced from mineral compounds such as oxides or sulfides. The use of oxides and sulfides also enables the correct setting of the mass densities of minerals, which was previously limited to the manual setting of individual atomic densities of elements. All of the energies and densities used are thereby based on tabulated data, so that only minimal user input and no fitting of parameters are required. We found unprecedented agreement between the newly implemented hybrid model and previously published sputter yields for incidence angles up to 45° from surface normal. Good agreement is found for the angular distribution of mass sputtered from enstatite MgSiO$_3$ compared to latest experimental data. Energy distributions recreate trends of experimental data of oxidized metals. Similar trends are to be expected from future mineral experimental data. The model thus serves its purpose of widespread applicability and ease of use for modelers of rocky body exospheres.
△ Less
Submitted 24 April, 2023;
originally announced April 2023.
-
A quasi-continuous exhaust scenario for a fusion reactor: the renaissance of small edge localized modes
Authors:
G. F. Harrer,
M. Faitsch,
L. Radovanovic,
E. Wolfrum,
C. Albert,
A. Cathey,
M. Cavedon,
M. Dunne,
T. Eich,
R. Fischer,
M. Hoelzl,
B. Labit,
H. Meyer,
F. Aumayr,
the ASDEX Upgrade Team,
the EUROfusion MST1 Team
Abstract:
Tokamak operational regimes with small edge localized modes (ELMs) could be a solution to the problem of large transient heat loads in future fusion reactors because they provide quasi-continuous exhaust while kee** a good plasma confinement. A ballooning mode mechanism near the last closed flux surface (LCFS) governed by an interplay of the pressure gradient and the magnetic shear there has bee…
▽ More
Tokamak operational regimes with small edge localized modes (ELMs) could be a solution to the problem of large transient heat loads in future fusion reactors because they provide quasi-continuous exhaust while kee** a good plasma confinement. A ballooning mode mechanism near the last closed flux surface (LCFS) governed by an interplay of the pressure gradient and the magnetic shear there has been proposed for small ELMs in high density ASDEX Upgrade and TCV discharges. In this manuscript we explore different factors relevant for plasma edge stability in a wide range of edge safety factors by changing the connection length between the good and the bad curvature side. Simultaneously this influences the stabilizing effect of the local magnetic shear close to the LCFS as well as the $E \times B$ flow shear. Ideal ballooning stability calculations with the HELENA code reveal that small ELM plasmas are indeed unstable against ballooning modes very close to the LCFS but can exhibit second ballooning stability in the steep gradient region which correlates with enhanced confinement. We also present first non-linear simulations of small ELM regimes with the JOREK code including the $E \times B$ shear which indeed develop ballooning like fluctuations in the high triangularity limit. In the region where the small ELMs originate the dimensionless parameters are very similar in our investigated discharges and in a reactor, making this regime the ideal exhaust scenario for a future reactor.
△ Less
Submitted 25 October, 2021;
originally announced October 2021.
-
Pulsed photoelectric coherent manipulation and detection of NV centre spins in diamond
Authors:
Michal Gulka,
Emilie Bourgeois,
Jaroslav Hruby,
Peter Siyushev,
Georg Wachter,
Friedrich Aumayr,
Philip R. Hemmer,
Adam Gali,
Fedor Jelezko,
Michael Trupke,
Milos Nesladek
Abstract:
Hybrid photoelectric detection of NV magnetic resonances (PDMR) is anticipated to lead to scalable quantum chip technology. To achieve this goal, it is crucial to prove that PDMR readout is compatible with the coherent spin control. Here we present PDMR MW pulse protocols that filter background currents related to ionization of NS0 defects and achieve a high contrast and S/N ratio. We demonstrate…
▽ More
Hybrid photoelectric detection of NV magnetic resonances (PDMR) is anticipated to lead to scalable quantum chip technology. To achieve this goal, it is crucial to prove that PDMR readout is compatible with the coherent spin control. Here we present PDMR MW pulse protocols that filter background currents related to ionization of NS0 defects and achieve a high contrast and S/N ratio. We demonstrate Rabi and Ramsey protocols on shallow nitrogen-implanted electronic grade diamond and the coherent readout of ~ 5 NV spins, as a first step towards the fabrication of scalable photoelectric quantum devices.
△ Less
Submitted 11 November, 2016; v1 submitted 26 October, 2016;
originally announced October 2016.
-
Enhanced dual-beam excitation photoelectric detection of NV magnetic resonances in diamond
Authors:
E. Bourgeois,
E. Londero,
K. Buczak,
Y. Balasubramaniam,
G. Wachter,
J. Stursa,
K. Dobes,
F. Aumayr,
M. Trupke,
A. Gali,
M. Nesladek
Abstract:
The core issue for the implementation of the diamond NV centre qubits technology is the sensitive readout of NV spin state. We have recently demonstrated the photoelectric detection of NV magnetic resonances (PDMR), anticipated to be faster and more sensitive than optical detection (ODMR). Here we report on a PDMR contrast of 9 % - three times enhanced compared to previous work - on shallow N-impl…
▽ More
The core issue for the implementation of the diamond NV centre qubits technology is the sensitive readout of NV spin state. We have recently demonstrated the photoelectric detection of NV magnetic resonances (PDMR), anticipated to be faster and more sensitive than optical detection (ODMR). Here we report on a PDMR contrast of 9 % - three times enhanced compared to previous work - on shallow N-implanted diamond. Based on ab-initio modelling, we demonstrate a novel one-photon ionization dual-beam PDMR protocol. We predict that this scheme is significantly less vulnerable to the influence of defects such as substitutional nitrogen.
△ Less
Submitted 4 July, 2016;
originally announced July 2016.
-
Energy deposition by heavy ions: Additivity of kinetic and potential energy contributions in hillock formation on CaF2
Authors:
Y. Y. Wang,
C. Grygiel,
C. Dufour,
J. R. Sun,
Z. G. Wang,
Y. T. Zhao,
G. Q. Xiao,
R. Cheng,
X. M. Zhou,
J. R. Ren,
S. D. Liu,
Y. Lei,
Y. B. Sun,
R. Ritter,
E. Gruber,
A. Cassimi,
I. Monnet,
S. Bouffard,
F. Aumayr,
M. Toulemonde
Abstract:
The formation of nano-hillocks on CaF2 crystal surfaces by individual ion impact has been studied using medium energy (3 and 5 MeV) highly charged ions (Xe19+ to Xe30+) as well as swift (kinetic energies between 12 and 58 MeV) heavy ions. For very slow highly charged ions the appearance of hillocks is known to be linked to a threshold in potential energy while for swift heavy ions a minimum electr…
▽ More
The formation of nano-hillocks on CaF2 crystal surfaces by individual ion impact has been studied using medium energy (3 and 5 MeV) highly charged ions (Xe19+ to Xe30+) as well as swift (kinetic energies between 12 and 58 MeV) heavy ions. For very slow highly charged ions the appearance of hillocks is known to be linked to a threshold in potential energy while for swift heavy ions a minimum electronic energy loss is necessary. With our results we bridge the gap between these two extreme cases and demonstrate, that with increasing energy deposition via electronic energy loss the potential energy threshold for hillock production can be substantially lowered. Surprisingly, both mechanisms of energy deposition in the target surface seem to contribute in an additive way, as demonstrated when plotting the results in a phase diagram. We show that the inelastic thermal spike model, originally developed to describe such material modifications for swift heavy ions, can be extended to case where kinetic and potential energies are deposited into the surface.
△ Less
Submitted 17 February, 2014;
originally announced February 2014.
-
Charge Exchange and Energy Loss of Slow Highly Charged Ions in 1nm Thick Carbon Nanomembranes
Authors:
Richard A. Wilhelm,
Elisabeth Gruber,
Robert Ritter,
René Heller,
Stefan Facsko,
Friedrich Aumayr
Abstract:
Experimental charge exchange and energy loss data for the transmission of slow highly charged Xe ions through ultra-thin polymeric carbon membranes are presented. Surprisingly, two distinct exit charge state distributions accompanied by charge exchange dependent energy losses are observed. The energy loss for ions exhibiting large charge loss shows a quadratic dependency on the incident charge sta…
▽ More
Experimental charge exchange and energy loss data for the transmission of slow highly charged Xe ions through ultra-thin polymeric carbon membranes are presented. Surprisingly, two distinct exit charge state distributions accompanied by charge exchange dependent energy losses are observed. The energy loss for ions exhibiting large charge loss shows a quadratic dependency on the incident charge state indicating that equilibrium stop** force values do not apply in this case. Additional angle resolved transmission measurements point on a significant contribution of elastic energy loss. The observations show that regimes of different impact parameters can be separated and thus a particle's energy deposition in an ultra-thin solid target may not be described in terms of an averaged energy loss per unit length.
△ Less
Submitted 24 March, 2014; v1 submitted 18 November, 2013;
originally announced November 2013.
-
Phase diagram for nanostructuring CaF$_2$ surfaces by slow highly charged ions
Authors:
A. S. El-Said,
R. A. Wilhelm,
R. Heller,
S. Facsko,
C. Lemell,
G. Wachter,
J. Burgdörfer,
R. Ritter,
F. Aumayr
Abstract:
Impacts of individual slow highly charged ions on alkaline earth halide and alkali halide surfaces create nano-scale surface modifications. For different materials and impact energies a wide variety of topographic alterations have been observed, ranging from regularly shaped pits to nano-hillocks. We present experimental evidence for a second threshold for defect creation supported by simulations…
▽ More
Impacts of individual slow highly charged ions on alkaline earth halide and alkali halide surfaces create nano-scale surface modifications. For different materials and impact energies a wide variety of topographic alterations have been observed, ranging from regularly shaped pits to nano-hillocks. We present experimental evidence for a second threshold for defect creation supported by simulations involving the initial electronic heating and subsequent molecular dynamics. From our findings a unifying phase diagram underlying these diverse observations can be derived. By chemically etching of CaF$_2$ samples after irradiation with slow highly charged ions both above and below the potential energy threshold for hillock formation another threshold exists above which triangular pits are observed after etching. This threshold depends on both the potential and kinetic energies of the incident ion. Simulations indicate that this second threshold is associated with the formation of defect aggregates in the topmost layers of CaF$_2$.
△ Less
Submitted 23 February, 2012;
originally announced February 2012.
-
Charge exchange and ionisation in N$^{7+}$, N$^{6+}$, C$^{6+}$ - H($n=1, 2$) collisions studied systematically by theoretical approaches
Authors:
Katharin Igenbergs,
Josef Schweinzer,
Alexander Veiter,
Lukas Perneczky,
Edwin Frühwirth,
Markus Wallerberger,
Ronald E. Olson,
Friedrich Aumayr
Abstract:
The introduction of gases like nitrogen or neon for cooling the edge region of magnetically confined fusion plasmas has triggered a renewed interest in state selective cross sections necessary for plasma diagnostics by means of charge exchange recombination spectroscopy. To improve the quality of spectroscopic data analysis, charge exchange and ionisation cross sections for N$^{7+}$ + H($n=1,2$) h…
▽ More
The introduction of gases like nitrogen or neon for cooling the edge region of magnetically confined fusion plasmas has triggered a renewed interest in state selective cross sections necessary for plasma diagnostics by means of charge exchange recombination spectroscopy. To improve the quality of spectroscopic data analysis, charge exchange and ionisation cross sections for N$^{7+}$ + H($n=1,2$) have been calculated using two different theoretical approaches, namely the atomic-orbital close-coupling method and the classical trajectory Monte Carlo method. Total and state resolved charge exchange cross sections are analysed in detail.
In the second part, we compare two collision systems involving equally charged ions, C$^{6+}$ and N$^{6+}$ on atomic hydrogen. The analysis of the data lead to the conclusion that deviations between these two impurity ions are practically negligible. This finding is very helpful when calculating cross sections for collision systems with heavier not completely stripped impurity ions.
△ Less
Submitted 15 December, 2011;
originally announced December 2011.
-
Temperature Control of Ion Guiding Through Insulating Capillaries
Authors:
G. Kowarik,
R. J. Bereczky,
F. Ladinig,
D. Schrempf,
C. Lemell,
J. Burgdörfer,
K. Tőkési,
F. Aumayr
Abstract:
Guiding of highly charged ions (HCI) through tilted capillaries promises to develop into a tool to efficiently collimate and focus low-energy ion beams to sub-micrometer size. One control parameter to optimize guiding is the residual electrical conductivity of the insulating material. Its strong (nearly exponential) temperature dependence is the key to transmission control and can be used to suppr…
▽ More
Guiding of highly charged ions (HCI) through tilted capillaries promises to develop into a tool to efficiently collimate and focus low-energy ion beams to sub-micrometer size. One control parameter to optimize guiding is the residual electrical conductivity of the insulating material. Its strong (nearly exponential) temperature dependence is the key to transmission control and can be used to suppress transmission instabilities arising from large flux fluctuations of incident ions which otherwise would lead to Coulomb blocking of the capillary. We demonstrate the strong dependence of transmission of Ar$^{9+}$ ions through a single macroscopic glass capillary on temperature and ion flux. Results in the regime of dynamical equilibrium can be described by balance equations in the linear-response regime.
△ Less
Submitted 19 September, 2011;
originally announced September 2011.
-
Hot electrons induced by (rather) cold ions
Authors:
Thorsten Peters,
Christian Haake,
Detlef Diesing,
Domocos Kovacs,
Artur Golczewski,
Gregor Kowarik,
Fritz Aumayr,
Andreas Wucher,
Marika Schleberger
Abstract:
Thin film metal-insulator-metal junctions are used in a novel approach to investigate the dissipation of potential energy of multiply charged ions im**ing on a polycrystalline metal surface. The ion-metal interaction leads to excited electrons and holes within the top layer. A substantial fraction of these charge carriers is transported inwards and can be measured as an internal current in the…
▽ More
Thin film metal-insulator-metal junctions are used in a novel approach to investigate the dissipation of potential energy of multiply charged ions im**ing on a polycrystalline metal surface. The ion-metal interaction leads to excited electrons and holes within the top layer. A substantial fraction of these charge carriers is transported inwards and can be measured as an internal current in the thin film tunnel junction. In Ag-AlOX-Al junctions, yields of typically 0.1-1 electrons per im**ing ion are detected in the bottom Al layer. The separate effects of potential and kinetic energy on the tunneling yield are investigated by varying the charges state of the Ar projectile ions from 2+ to 9+ for kinetic energies in the range from 1 to 12 keV. The tunneling yield is found to scale linearly with the potential energy of the projectile.
△ Less
Submitted 24 October, 2007;
originally announced October 2007.
-
Potential energy threshold for nano-hillock formation by impact of slow highly charged ions on a CaF$_2$(111) surface
Authors:
A. S. El-Said,
W. Meissl,
M. C. Simon,
J. R. Crespo López-Urrutia,
C. Lemell,
J. Burgdörfer,
I. C. Gebeshuber,
HP. Winter,
J. Ullrich,
C. Trautmann,
M. Toulemonde,
F. Aumayr
Abstract:
We investigate the formation of nano-sized hillocks on the (111) surface of CaF$_2$ single crystals by impact of slow highly charged ions. Atomic force microscopy reveals a surprisingly sharp and well-defined threshold of potential energy carried into the collision of about 14 keV for hillock formation. Estimates of the energy density deposited suggest that the threshold is linked to a solid-liq…
▽ More
We investigate the formation of nano-sized hillocks on the (111) surface of CaF$_2$ single crystals by impact of slow highly charged ions. Atomic force microscopy reveals a surprisingly sharp and well-defined threshold of potential energy carried into the collision of about 14 keV for hillock formation. Estimates of the energy density deposited suggest that the threshold is linked to a solid-liquid phase transition (``melting'') on the nanoscale. With increasing potential energy, both the basal diameter and the height of the hillocks increase. The present results reveal a remarkable similarity between the present predominantly potential-energy driven process and track formation by the thermal spike of swift ($\sim$ GeV) heavy ions.
△ Less
Submitted 11 September, 2006;
originally announced September 2006.
-
A novel method for unambiguous ion identification in mixed ion beams extracted from an EBIT
Authors:
W. Meissl,
M. C. Simon,
J. R. Crespo Lopez-Urrutia,
H. Tawara,
J. Ullrich,
HP. Winter,
F. Aumayr
Abstract:
A novel technique to identify small fluxes of mixed highly charged ion beams extracted from an Electron Beam Ion Trap (EBIT) is presented and practically demonstrated. The method exploits projectile charge state dependent potential emission of electrons as induced by ion impact on a metal surface to separate ions with identical or very similar mass-to-charge ratio.
A novel technique to identify small fluxes of mixed highly charged ion beams extracted from an Electron Beam Ion Trap (EBIT) is presented and practically demonstrated. The method exploits projectile charge state dependent potential emission of electrons as induced by ion impact on a metal surface to separate ions with identical or very similar mass-to-charge ratio.
△ Less
Submitted 22 June, 2006;
originally announced June 2006.
