-
Low-$Q^2$ elastic electron-proton scattering using a gas jet target
Authors:
Y. Wang,
J. C. Bernauer,
B. S. Schlimme,
P. Achenbach,
S. Aulenbacher,
M. Ball,
M. Biroth,
D. Bonaventura,
D. Bosnar,
P. Brand,
S. Caiazza,
M. Christmann,
E. Cline,
A. Denig,
M. O. Distler,
L. Doria,
P. Eckert,
A. Esser,
I. Friscic,
S. Gagneur,
J. Geimer,
S. Grieser,
P. Gulker,
P. Herrmann,
M. Hoek
, et al. (32 additional authors not shown)
Abstract:
In this paper, we describe an experiment measuring low-$Q^2$ elastic electron-proton scattering using a newly developed cryogenic supersonic gas jet target in the A1 three-spectrometer facility at the Mainz Microtron. We measured the proton electric form factor within the four-momentum transfer range of $0.01\le Q^2 \le 0.045(\text{GeV/c})^2$. The experiment showed consistent results with the exis…
▽ More
In this paper, we describe an experiment measuring low-$Q^2$ elastic electron-proton scattering using a newly developed cryogenic supersonic gas jet target in the A1 three-spectrometer facility at the Mainz Microtron. We measured the proton electric form factor within the four-momentum transfer range of $0.01\le Q^2 \le 0.045(\text{GeV/c})^2$. The experiment showed consistent results with the existing measurements. The data we collected demonstrated the feasibility of the gas jet target and the potential of future scattering experiments using high-resolution spectrometers with this gas jet target.
△ Less
Submitted 29 August, 2022;
originally announced August 2022.
-
Operation and characterization of a windowless gas jet target in high-intensity electron beams
Authors:
B. S. Schlimme,
S. Aulenbacher,
P. Brand,
M. Littich,
Y. Wang,
P. Achenbach,
M. Ball,
J. C. Bernauer,
M. Biroth,
D. Bonaventura,
D. Bosnar,
S. Caiazza,
M. Christmann,
E. Cline,
A. Denig,
M. O. Distler,
L. Doria,
P. Eckert,
A. Esser,
I. Friščić,
S. Gagneur,
J. Geimer,
S. Grieser,
P. Gülker,
P. Herrmann
, et al. (32 additional authors not shown)
Abstract:
A cryogenic supersonic gas jet target was developed for the MAGIX experiment at the high-intensity electron accelerator MESA. It will be operated as an internal, windowless target in the energy-recovering recirculation arc of the accelerator with different target gases, e.g., hydrogen, deuterium, helium, oxygen, argon, or xenon. Detailed studies have been carried out at the existing A1 multi-spect…
▽ More
A cryogenic supersonic gas jet target was developed for the MAGIX experiment at the high-intensity electron accelerator MESA. It will be operated as an internal, windowless target in the energy-recovering recirculation arc of the accelerator with different target gases, e.g., hydrogen, deuterium, helium, oxygen, argon, or xenon. Detailed studies have been carried out at the existing A1 multi-spectrometer facility at the electron accelerator MAMI. This paper focuses on the developed handling procedures and diagnostic tools, and on the performance of the gas jet target under beam conditions. Considering the special features of this type of target, it proves to be well suited for a new generation of high-precision electron scattering experiments at high-intensity electron accelerators.
△ Less
Submitted 16 July, 2021; v1 submitted 27 April, 2021;
originally announced April 2021.
-
Electron beam studies of light collection in a scintillating counter with embedded fibers
Authors:
M. Lauß,
P. Achenbach,
S. Aulenbacher,
M. Ball,
I. Beltschikow,
M. Biroth,
P. Brand,
S. Caiazza,
M. Christmann,
O. Corell,
A. Denig,
L. Doria,
P. Drexler,
J. Geimer,
P. Gülker,
T. Kolar,
W. Lauth,
M. Littich,
M. Lupberger,
S. Lunkenheimer,
D. Markus,
M. Mauch,
H. Merkel,
M. Mihovilovič,
J. Müller
, et al. (6 additional authors not shown)
Abstract:
The light collection of several fiber configurations embedded in a box-shaped plastic scintillating counter was studied by scanning with minimum ionizing electrons. The light was read out by silicon photomultipliers at both ends. The light yield produced by the 855-MeV beam of the Mainz Microtron showed a strong dependence on the transverse distance from the beam position to the fibers. The observ…
▽ More
The light collection of several fiber configurations embedded in a box-shaped plastic scintillating counter was studied by scanning with minimum ionizing electrons. The light was read out by silicon photomultipliers at both ends. The light yield produced by the 855-MeV beam of the Mainz Microtron showed a strong dependence on the transverse distance from the beam position to the fibers. The observations were modeled by attributing the collection of indirect light inside of the counter and of direct light reaching a fiber to the total light yield. The light collection with fibers was compared to that of a scintillating counter without fibers. These studies were carried out within the development of plastic scintillating detectors as an active veto system for the DarkMESA electron beam-dump experiment that will search for light dark matter particles in the MeV mass range.
△ Less
Submitted 2 July, 2021; v1 submitted 15 January, 2021;
originally announced January 2021.
-
Beam-Normal Single Spin Asymmetry in Elastic Electron Scattering off $^{28}$Si and $^{90}$Zr
Authors:
A. Esser,
M. Thiel,
P. Achenbach,
K. Aulenbacher,
S. Aulenbacher,
S. Baunack,
D. Bosnar,
S. Caiazza,
M. Christmann,
M. Dehn,
M. O. Distler,
L. Doria,
P. Eckert,
M. Gorchtein,
P. Guelker,
P. Herrmann,
M. Hoek,
S. Kegel,
P. Klag,
H. -J. Kreidel,
M. Littich,
S. Lunkenheimer,
F. E. Maas,
M. Makek,
H. Merkel
, et al. (8 additional authors not shown)
Abstract:
We report on a new measurement of the beam-normal single spin asymmetry $A_{\mathrm{n}}$ in the elastic scattering of 570 MeV transversely polarized electrons off $^{28}$Si and $^{90}$Zr at $Q^{2}=0.04\, \mathrm{GeV}^2/c^2$. The studied kinematics allow for a comprehensive comparison with former results on $^{12}$C. No significant mass dependence of the beam-normal single spin asymmetry is observe…
▽ More
We report on a new measurement of the beam-normal single spin asymmetry $A_{\mathrm{n}}$ in the elastic scattering of 570 MeV transversely polarized electrons off $^{28}$Si and $^{90}$Zr at $Q^{2}=0.04\, \mathrm{GeV}^2/c^2$. The studied kinematics allow for a comprehensive comparison with former results on $^{12}$C. No significant mass dependence of the beam-normal single spin asymmetry is observed in the mass regime from $^{12}$C to $^{90}$Zr.
△ Less
Submitted 30 April, 2020;
originally announced April 2020.
-
Development of large area focal plane detectors for MAGIX
Authors:
P. Gülker,
P. Achenbach,
S. Aulenbacher,
J. Bernauer,
S. Caiazza,
M. Christmann,
A. Denig,
S. Grieser,
A. -K. Hergemöller,
B. Hetz,
A. Khoukaz,
M. Klein,
T. Kolar,
M. Littich,
S. Lunkenheimer,
M. Mauch,
H. Merkel,
M. Mihovilovic,
J. Muller,
J. Rausch,
Y. Schelhaas,
S. Schlimme,
S. Sirca
Abstract:
MAGIX is a planned experiment that will be implemented at the upcoming accelerator MESA in Mainz. Due to its location in the energy-recovering lane of the accelerator beam-currents up to 1mA with a maximum energy of 105 MeV will be available for precision experiments. MAGIX itself consists of a jet-target and two magnetic spectrometers. Inside the spectrometers GEM-based detectors will be used in…
▽ More
MAGIX is a planned experiment that will be implemented at the upcoming accelerator MESA in Mainz. Due to its location in the energy-recovering lane of the accelerator beam-currents up to 1mA with a maximum energy of 105 MeV will be available for precision experiments. MAGIX itself consists of a jet-target and two magnetic spectrometers. Inside the spectrometers GEM-based detectors will be used in the focal plane for track reconstruction. The design goals for the detector modules are a spatial resolution of 50 um, a size of 1.20 m x 0.3 m and a minimal material budget. To accomplish these goals we started develo** several GEM-prototypes to study different behaviors and techniques to optimize the final detector design. The GEM foils used are provided by CERN and are trained, stretched and framed in our laboratory. The readout is done with an SRS based system. In this contribution the requirements, achievements and the ongoing developments are presented.
△ Less
Submitted 2 August, 2019; v1 submitted 13 June, 2019;
originally announced June 2019.
-
Design and Operation of a Windowless Gas Target Internal to a Solenoidal Magnet for Use with a Megawatt Electron Beam
Authors:
S. Lee,
R. Corliss,
I. Friščić,
R. Alarcon,
S. Aulenbacher,
J. Balewski,
S. Benson,
J. C. Bernauer,
J. Bessuille,
J. Boyce,
J. Coleman,
D. Douglas,
C. S. Epstein,
P. Fisher,
S. Frierson,
M. Garçon,
J. Grames,
D. Hasell,
C. Hernandez-Garcia,
E. Ihloff,
R. Johnston,
K. Jordan,
R. Kazimi,
J. Kelsey,
M. Kohl
, et al. (15 additional authors not shown)
Abstract:
A windowless hydrogen gas target of nominal thickness $10^{19}$ cm$^{-2}$ is an essential component of the DarkLight experiment, which is designed to utilize the megawatt electron beam at an Energy Recovery Linac (ERL). The design of such a target is challenging because the pressure drops by many orders of magnitude between the central, high-density section of the target and the surrounding beamli…
▽ More
A windowless hydrogen gas target of nominal thickness $10^{19}$ cm$^{-2}$ is an essential component of the DarkLight experiment, which is designed to utilize the megawatt electron beam at an Energy Recovery Linac (ERL). The design of such a target is challenging because the pressure drops by many orders of magnitude between the central, high-density section of the target and the surrounding beamline, resulting in laminar, transitional, and finally molecular flow regimes. The target system was assembled and operated at Jefferson Lab's Low Energy Recirculator Facility (LERF) in 2016, and subsequently underwent several revisions and calibration tests at MIT Bates in 2017. The system at dynamic equilibrium was simulated in COMSOL to provide a better understanding of its optimal operation at other working points. We have determined that a windowless gas target with sufficiently high density for DarkLight's experimental needs is feasible in an ERL environment.
△ Less
Submitted 30 May, 2019; v1 submitted 6 March, 2019;
originally announced March 2019.
