-
Intrinsic Anisotropy and Pinning Anisotropy in Nanostructured YBa$_2$Cu$_3$O$_{7-δ}$ from Microwave Measurements
Authors:
N. Pompeo,
A Alimenti,
K Torokhtii,
E Bartolomé,
A Palau,
T Puig,
A Augieri,
V Galluzzi,
A Mancini,
G Celentano,
X Obradors,
E Silva
Abstract:
Anisotropy is an intrinsic factor that dictates the magnetic properties of YBCO, thus with great impact for many applications. Artificial pinning centres are often introduced in an attempt to mitigate its effect, resulting in less anisotropic electrical and magnetic properties. However, the nanoengineering of the superconductor makes the quantification of the anisotropy itself uncertain: the intri…
▽ More
Anisotropy is an intrinsic factor that dictates the magnetic properties of YBCO, thus with great impact for many applications. Artificial pinning centres are often introduced in an attempt to mitigate its effect, resulting in less anisotropic electrical and magnetic properties. However, the nanoengineering of the superconductor makes the quantification of the anisotropy itself uncertain: the intrinsic anisotropy due to the layered structure, quantified by the anisotropy factor $γ$, mixes up with the additional anisotropy due to pinning. As a consequence, there is no consensus on the experimental anisotropy factor $γ$ that can result in YBCO when directional (twin planes, nanorods) or isotropic defects are present. We present here measurements of the magnetic field and angular dependent surface impedance in very different nanostructured YBCO films, grown by chemical route and by pulsed laser deposition, with different kind of defects (nanorods, twin planes, nanoparticles). We show that the surface impedance measurements are able to disentangle the intrinsic anisotropy from the directional pinning anisotropy, thanks to the possibility to extract the true anisotropic flux--flow resistivity and by correctly exploiting the angular scaling. We find in all films that the intrinsic anisotropy $γ= 5.3\pm0.7$. By contrast, the pinning anisotropy determines a much complex, feature--rich and nonuniversal, sample--dependent angular landscape.
△ Less
Submitted 28 January, 2020;
originally announced January 2020.
-
Ionic liquid gating of ultra-thinYBa$_2$Cu$_3$O$_{7-x}$ films
Authors:
A. Fête,
L. Rossi,
A. Augieri,
C. Senatore
Abstract:
In this paper, we present a detailed investigation of the self-field transport properties of an ionic liquid gated ultra-thin YBa$_2$Cu$_3$O$_{7-x}$ film. From the high temperature dynamic of the resistivity ($> 220 \textrm{ K}$) different scenarios pertaining to the interaction between the liquid and the thin film are proposed. From the low temperature evolution of $J_{\textrm{c}}$ and…
▽ More
In this paper, we present a detailed investigation of the self-field transport properties of an ionic liquid gated ultra-thin YBa$_2$Cu$_3$O$_{7-x}$ film. From the high temperature dynamic of the resistivity ($> 220 \textrm{ K}$) different scenarios pertaining to the interaction between the liquid and the thin film are proposed. From the low temperature evolution of $J_{\textrm{c}}$ and $T_{\textrm{c}}$ a comparison between the behavior of our system and the standard properties of YBCO is drawn.
△ Less
Submitted 16 November, 2016;
originally announced November 2016.
-
Directional pinning and anisotropy in YBa2Cu3O7-x with BaZrO3 nanorods: intrinsic and nanorods-induced anisotropy
Authors:
N. Pompeo,
K. Torokhtii,
A. Augieri,
G. Celentano,
V. Galluzzi,
E. Silva
Abstract:
We present a study of the anisotropic vortex parameters as obtained from measurements of the microwave complex resistivity in the vortex state with a tilted applied magnetic field in YBa2Cu3O7-x thin films with BaZrO3 nanorods. We present the angular dependence of the vortex viscosity $η$, the pinning constant k_p and the upper limit for the creep factor χ_M. We show that the directional effect of…
▽ More
We present a study of the anisotropic vortex parameters as obtained from measurements of the microwave complex resistivity in the vortex state with a tilted applied magnetic field in YBa2Cu3O7-x thin films with BaZrO3 nanorods. We present the angular dependence of the vortex viscosity $η$, the pinning constant k_p and the upper limit for the creep factor χ_M. We show that the directional effect of the nanorods is absent in η, which is dictated by the mass anisotropy γ. By contrast, pinning-mediated properties are strongly affected by the nanorods. It is significant that the pinning and creep affected by the nanorods is detectable also at our very high operating frequency, which implies very short-range displacements of the vortices from their equilibrium position.
△ Less
Submitted 7 April, 2014;
originally announced April 2014.
-
Anisotropy and directional pinning in YBaCuO with BaZrO3 nanorods
Authors:
N. Pompeo,
A. Augieri,
K. Torokhtii,
V. Galluzzi,
G. Celentano,
E. Silva
Abstract:
Measurements of anisotropic transport properties (dc and high-frequency regime) of driven vortex matter in YBa$_2$Cu$_3$O$_{7-x}$ with elongated strong-pinning sites (c-axis aligned, self-assembled BaZrO$_3$ nanorods) are used to demonstrate that the effective-mass angular scaling takes place only in intrinsic physical quantities (flux-flow resistivity), and not in pinning-related Labusch paramete…
▽ More
Measurements of anisotropic transport properties (dc and high-frequency regime) of driven vortex matter in YBa$_2$Cu$_3$O$_{7-x}$ with elongated strong-pinning sites (c-axis aligned, self-assembled BaZrO$_3$ nanorods) are used to demonstrate that the effective-mass angular scaling takes place only in intrinsic physical quantities (flux-flow resistivity), and not in pinning-related Labusch parameter and critical currents. Comparison of the dynamics at different time scales shows evidence for a transition of the vortex matter toward a Mott phase, driven by the presence of nanorods. The strong pinning in dc arises partially from a dynamic effect.
△ Less
Submitted 24 June, 2013; v1 submitted 14 November, 2012;
originally announced November 2012.
-
MOD derived pyrochlore films as buffer layer for all-chemical YBCO coated conductors
Authors:
Andrea Augieri,
Angelo Vannozzi,
Rita Mancini,
Achille Armenio Angrisani,
Fabio Fabbri,
Valentina Galluzzi,
Alessandro Rufoloni,
Francesco Rizzo,
Antonella Mancini,
Giuseppe Celentano,
Ivan Colantoni,
Ivan Davoli,
Nicola Pompeo,
Giovanni Sotgiu,
Enrico Silva
Abstract:
We report a detailed study performed on La2Zr2O7 (LZO) pyrochlore material grown by Metal-Organic Decomposition (MOD) method as buffer layers for YBa2Cu3O7-x (YBCO) coated conductors. High quality epitaxial LZO thin films have been obtained on single crystal (SC) and Ni-5%at.W substrates. In order to evaluate structural and morphological properties, films have been characterized by means of X-ray…
▽ More
We report a detailed study performed on La2Zr2O7 (LZO) pyrochlore material grown by Metal-Organic Decomposition (MOD) method as buffer layers for YBa2Cu3O7-x (YBCO) coated conductors. High quality epitaxial LZO thin films have been obtained on single crystal (SC) and Ni-5%at.W substrates. In order to evaluate structural and morphological properties, films have been characterized by means of X-ray diffraction analyses (XRD), atomic force microscope (AFM) and scanning electron microscope (SEM). Precursors solutions and heat treatments have been studied by thermogravimetric analyses (TG-DTA-DTG) and infrared spectra (FT-IR) with the aim of optimizing the annealing process. Thin films of YBCO have been deposited by pulsed laser ablation (PLD) on this buffer layers. The best results obtained on SC showed YBCO films with critical temperature values above 90 K, high self field critical current density values (Jc > 1 MA/cm2) and high irreversibility field values (8.3 T) at 77 K together with a rather high depinning frequency vp (0.5 T, 77 K)>44 GHz as determined at microwaves. The best results on Ni-5%at.W has been obtained introducing in the heat treatment a pyrolysis process at low temperature in air in order to remove the residual organic part of the precursor solution.
△ Less
Submitted 12 December, 2012; v1 submitted 31 October, 2012;
originally announced October 2012.
-
Directional vortex pinning at microwave frequency in YBa$_{2}$Cu$_3$O$_{7-x}$ thin films with BaZrO$_3$ nanorods
Authors:
N. Pompeo,
K. Torokhtii,
A. Augieri,
G. Celentano,
V. Galluzzi,
E. Silva
Abstract:
We investigate the effect of the anisotropy and of the directional pinning in YBa$_2$Cu$_3$O$_{7-x}$ films grown by pulsed laser ablation from targets containing BaZrO$_3$ at 5% mol. BaZrO$_3$ inclusions self-assemble to give nanorods oriented along the c-axis, thus giving a preferential direction for vortex pinning. The directionality of vortex response is studied at high ac frequency with the co…
▽ More
We investigate the effect of the anisotropy and of the directional pinning in YBa$_2$Cu$_3$O$_{7-x}$ films grown by pulsed laser ablation from targets containing BaZrO$_3$ at 5% mol. BaZrO$_3$ inclusions self-assemble to give nanorods oriented along the c-axis, thus giving a preferential direction for vortex pinning. The directionality of vortex response is studied at high ac frequency with the complex microwave response at 48 GHz, as a function of the applied field and of the angle $θ$ between the field and the c-axis. The complex microwave response does not exhibit any angular scaling, suggesting that the structural anisotropy of YBa$_2$Cu$_3$O$_{7-x}$ is supplemented by at least another preferred orientation. The pinning parameter $r$ shows evidence of directional pinning, effective in a wide range of angles around the c-axis (thus ascribed to BZO nanocolumns).
△ Less
Submitted 26 October, 2012;
originally announced October 2012.
-
Angular dependence of the high-frequency vortex response in YBa$_2$Cu$_3$O$_{7-x}$ thin film with self-assembled BaZrO$_3$ nanorods
Authors:
N. Pompeo,
R. Rogai,
K. Torokhtii,
A. Augieri,
G. Celentano,
V. Galluzzi,
E. Silva
Abstract:
We present a microwave study of the angular dependence of the flux-flow resistivity $ρ_{ff}$ and of the pinning constant $k_p$ in YBCO thin films containing BZO nanorods. We find that BZO nanorods are very efficient pinning centers, even in tilted fields. We find that $ρ_{ff}$ is a scaling function of a reduced field $H/f(θ)$. We extend a model for the anisotropic motion of vortices in uniaxially…
▽ More
We present a microwave study of the angular dependence of the flux-flow resistivity $ρ_{ff}$ and of the pinning constant $k_p$ in YBCO thin films containing BZO nanorods. We find that BZO nanorods are very efficient pinning centers, even in tilted fields. We find that $ρ_{ff}$ is a scaling function of a reduced field $H/f(θ)$. We extend a model for the anisotropic motion of vortices in uniaxially anisotropic superconductor, able to describe the experimental $f(θ)$ on the basis of only the intrinsic anisotropy of YBCO. The pinning constant $k_p$, by contrast, exhibits different field dependences in different angular ranges, consistent with pinning by BZO at angles as large as 60$^{\circ}$, and with pinning along the $a,b$ planes as originating from the same mechanism as in pure YBCO with the field along the c axis.
△ Less
Submitted 21 December, 2011;
originally announced December 2011.
-
Microwave properties of DyBCO monodomain in the mixed state and comparison with other RE-BCO systems
Authors:
N. Pompeo,
R. Rogai,
M. Ausloos,
R. Cloots,
A. Augieri,
G. Celentano,
E. Silva
Abstract:
We report on microwave measurements on DyBa$_2$Cu$_3$O$_{7-\rmδ}$ monodomains grown by the top-seeded melt-textured technique. We measured the field increase of the surface resistance $R_{\rm s}(H)$ in the a-b plane at 48.3 GHz. Measurements were performed at fixed temperatures in the range 70 K - $T_{\rm c}$ with a static magnetic field $μ_0H<0.8$ T parallel to the c-axis. Low field steep increas…
▽ More
We report on microwave measurements on DyBa$_2$Cu$_3$O$_{7-\rmδ}$ monodomains grown by the top-seeded melt-textured technique. We measured the field increase of the surface resistance $R_{\rm s}(H)$ in the a-b plane at 48.3 GHz. Measurements were performed at fixed temperatures in the range 70 K - $T_{\rm c}$ with a static magnetic field $μ_0H<0.8$ T parallel to the c-axis. Low field steep increase of the dissipation, typical signature of the presence of weak links, is absent, thus indicating the single-domain behaviour of the sample under study. The magnetic field dependence of $R_{\rm s}(H)$ is ascribed to the dissipation caused by vortex motion. The analysis of $X_{\rm s}(H)$ points to a free-flow regime, thus allowing to obtain the vortex viscosity as a function of temperature. We compare the results with those obtained on RE-BCO systems. In particular, we consider strongly pinned films of YBa$_2$Cu$_3$O$_{7-\rmδ}$ with nanometric BaZrO$_3$ inclusions.
△ Less
Submitted 4 March, 2011;
originally announced March 2011.
-
Effect of nanosize BaZrO3 inclusions on vortex parameters in YBaCuO
Authors:
E. Silva,
N. Pompeo,
R. Rogai,
A. Augieri,
V. Galluzzi,
G. Celentano
Abstract:
We report on the field dependence of the microwave complex resistivity data in YBa$_2$Cu$_3$O$_{7-x}$/BaZrO$_3$ films grown by PLD at various BaZrO$_3$ content. The data, analyzed within a recently developed general framework for the mixed-state microwave response of superconductors, yield the field dependence of the fluxon parameters such as the vortex viscosity and the pinning constant. We fin…
▽ More
We report on the field dependence of the microwave complex resistivity data in YBa$_2$Cu$_3$O$_{7-x}$/BaZrO$_3$ films grown by PLD at various BaZrO$_3$ content. The data, analyzed within a recently developed general framework for the mixed-state microwave response of superconductors, yield the field dependence of the fluxon parameters such as the vortex viscosity and the pinning constant. We find that pinning undergoes a change of regime when the BaZrO$_3$ content in the target increases from 2.5 mol.% to 5 mol.%. Simultaneously, the vortex viscosity becomes an increasing function of the applied magnetic field. We propose a scenario in which flux lines are pinned as bundles, and a crossover from dilute point pins to dense c-axis correlated defects takes place between 2.5 and 5 mol.% in the BZO concentration. Our data are inconsistent with vortices occupying mainly the BaZrO$_3$ sites at low fields, and suggest instead that vortices occupy both BaZrO$_3$ sites and interstitials in the YBa$_2$Cu$_3$O$_{7-x}$ matrix, even at low fields.
△ Less
Submitted 27 October, 2009;
originally announced October 2009.
-
Reduction of the field-dependent microwave surface resistance in YBa_2Cu_3O_7 with sub-micrometric BaZrO_3 inclusions as a function of BaZrO_3 concentration
Authors:
N. Pompeo,
R. Rogai,
E. Silva,
A. Augieri,
V. Galluzzi,
G. Celentano
Abstract:
In order to study the vortex pinning determined by artificially introduced pinning centers in the small-vortex displacement regime, we measured the microwave surface impedance at 47.7 GHz in the mixed state of YBa$_{2}$Cu$_{3}$O$_{7-δ}$ thin films, where sub-micrometric BaZrO$_3$ particles have been incorporated. As a function of the BaZrO$_3$ content, we observe that the absolute losses slightl…
▽ More
In order to study the vortex pinning determined by artificially introduced pinning centers in the small-vortex displacement regime, we measured the microwave surface impedance at 47.7 GHz in the mixed state of YBa$_{2}$Cu$_{3}$O$_{7-δ}$ thin films, where sub-micrometric BaZrO$_3$ particles have been incorporated. As a function of the BaZrO$_3$ content, we observe that the absolute losses slightly decrease up to a BaZrO$_3$ content of 5%, and then increase. We found that the magnetic-field-induced losses behave differently, in that they are not monotonic with increasing BaZrO$_3$ concentration: at small concentration (2.5%) the field-induced losses increase, but large reduction of the losses themselves, by factors up to 3, is observed upon further increasing the BaZrO$_3$ concentration in the target up to 7%. Using measurements of both surface resistance and surface reactance we estimate vortex pinning-related parameters. We find that BaZrO$_3$ inclusions introduce deep and steep pinning wells. In particular, the minimum height of the energy barrier for single vortices is raised. At larger BaZrO$_3$ content (5% and 7%) the phenomenon is at its maximum, but it is unclear whether it shows a saturation or not, thus leaving room for further improvements.
△ Less
Submitted 14 November, 2008;
originally announced November 2008.
-
Strong Reduction of the Field-Dependent Microwave Surface Resistance in YBCO with BaZrO_3 Inclusions
Authors:
N. Pompeo,
V. Galluzzi,
A. Augieri,
G. Celentano,
T. Petrisor,
R. Rogai,
E. Silva
Abstract:
We present measurements of the magnetic field dependent microwave surface resistance in laser-ablated YBa$_2$Cu$_3$O$_{7-δ}$ films on SrTiO$_3$ substrates. BaZrO$_3$ crystallites were included in the films using composite targets containing BaZrO$_3$ inclusions with mean grain size smaller than 1 $μ$m. X-ray diffraction showed single epitaxial relationship between BaZrO$_3$ and YBa$_2$Cu$_3$O…
▽ More
We present measurements of the magnetic field dependent microwave surface resistance in laser-ablated YBa$_2$Cu$_3$O$_{7-δ}$ films on SrTiO$_3$ substrates. BaZrO$_3$ crystallites were included in the films using composite targets containing BaZrO$_3$ inclusions with mean grain size smaller than 1 $μ$m. X-ray diffraction showed single epitaxial relationship between BaZrO$_3$ and YBa$_2$Cu$_3$O$_{7-δ}$. The effective surface resistance was measured at 47.7 GHz for 60$< T <$90 K and 0$< μ_0H <$0.8 T. The magnetic field had a very different effect on pristine YBa$_2$Cu$_3$O$_{7-δ}$ and YBa$_2$Cu$_3$O$_{7-δ}$/BaZrO$_3$, while for $μ_0H=$0 only a reduction of $T_c$ in the YBa$_2$Cu$_3$O$_{7-δ}$/BaZrO$_3$ film was observed, consistent with dc measurements. At low enough $T$, in moderate fields YBa$_2$Cu$_3$O$_{7-δ}$/BaZrO$_3$ exhibited an intrinsic thin film resistance lower than the pure film. The results clearly indicate that BaZrO$_3$ inclusions determine a strong reduction of the field-dependent surface resistance. From the analysis of the data in the framework of simple models for the microwave surface impedance in the mixed state we argue that BaZrO$_3$ inclusions determine very steep pinning potentials.
△ Less
Submitted 10 October, 2007;
originally announced October 2007.
-
Strong reduction of field-dependent microwave surface resistance in YBa$_{2}$Cu$_{3}$O$_{7-δ}$ with sub-micrometric BaZrO$_3$ inclusions
Authors:
N. Pompeo,
R. Rogai,
E. Silva,
A. Augieri,
V. Galluzzi,
G. Celentano
Abstract:
We observe a strong reduction of the field induced thin film surface resistance measured at high microwave frequency ($ν=$47.7 GHz) in YBa$_{2}$Cu$_{3}$O$_{7-δ}$ thin films grown on SrTiO$_3$ substrates, as a consequence of the introduction of sub-micrometric BaZrO$_3$ particles. The field increase of the surface resistance is smaller by a factor of $\sim$3 in the film with BaZrO$_3$ inclusions,…
▽ More
We observe a strong reduction of the field induced thin film surface resistance measured at high microwave frequency ($ν=$47.7 GHz) in YBa$_{2}$Cu$_{3}$O$_{7-δ}$ thin films grown on SrTiO$_3$ substrates, as a consequence of the introduction of sub-micrometric BaZrO$_3$ particles. The field increase of the surface resistance is smaller by a factor of $\sim$3 in the film with BaZrO$_3$ inclusions, while the zero-field properties are not much affected. Combining surface resistance and surface reactance data we conclude (a) that BaZrO$_3$ inclusions determine very deep and steep pinning wells and (b) that the pinning changes nature with respect to the pure film.
△ Less
Submitted 9 October, 2007;
originally announced October 2007.
-
Microwave properties of YBa$_2$Cu$_3$O$_{7-δ}$ films with BaZrO$_3$ nanoinclusions
Authors:
N. Pompeo,
E. Silva,
R. Marcon,
V. Galluzzi,
G. Celentano,
A. Augieri,
T. Petrisor
Abstract:
We present measurements of the microwave complex surface impedance at 47.7 GHz in YBa$_2$Cu$_3$O$_{7-δ}$ (YBCO) films deposited by pulsed laser deposition with the explicit goal to introduce BaZrO$_3$ (BZO) nanoinclusions. Composite targets obtained by addition of BZO powder in molar percents ranging from 2.5 to 7 mol.% have been prepared and characterized. Measurements of the microwave surface…
▽ More
We present measurements of the microwave complex surface impedance at 47.7 GHz in YBa$_2$Cu$_3$O$_{7-δ}$ (YBCO) films deposited by pulsed laser deposition with the explicit goal to introduce BaZrO$_3$ (BZO) nanoinclusions. Composite targets obtained by addition of BZO powder in molar percents ranging from 2.5 to 7 mol.% have been prepared and characterized. Measurements of the microwave surface impedance indicate a broadened transition in zero field, however compensated by a very large pinning frequency, indicating that while intergrain properties are still to be optimized the effect of nanometric inclusions substantially enhances the intragrain vortex pinning.
△ Less
Submitted 23 October, 2006;
originally announced October 2006.
