-
Probing $Ca_3Ti_2O_7$ crystal structure at the atomic level: Insights from $^{111m}Cd/^{111}Cd$ PAC spectroscopy and ab-initio studies
Authors:
P. Rocha-Rodrigues,
I. P. Miranda,
S. S. M. Santos,
G. N. P. Oliveira,
T. Leal,
M. L. Marcondes,
J. G. Correia,
L. V. C. Assali,
H. M. Petrilli,
J. P. Araújo,
A. M. L. Lopes
Abstract:
Perturbed angular correlation spectroscopy combined with $ab-initio$ electronic structure calculations is used to unravel the structural phase transition path from the low-temperature polar structure to the high-temperature structural phase in $Ca_3Ti_2O_7$, a hybrid improper ferroelectric. This procedure explores the unique features of a local probe environment approach by monitoring the evolutio…
▽ More
Perturbed angular correlation spectroscopy combined with $ab-initio$ electronic structure calculations is used to unravel the structural phase transition path from the low-temperature polar structure to the high-temperature structural phase in $Ca_3Ti_2O_7$, a hybrid improper ferroelectric. This procedure explores the unique features of a local probe environment approach by monitoring the evolution of the electric field gradient tensor at the calcium sites. The local environments, observed above 1057 K, confirm a structural phase transition from the $A2_1am$ symmetry to an orthorhombic $Acaa$ symmetry in the $Ca_3Ti_2O_7$ crystal lattice, disagreeing with the frequently reported avalanche structural transition from the polar $A2_1am$ phase to the aristotype $I4/mmm$ phase. Moreover, the EFG temperature dependency, within the $A2_1am$ temperature stability, is shown to be sensitive to the recently proposed $Ca_3Ti_2O_7$ ferroelectric polarization decrease within the 500-800~K temperature range.
△ Less
Submitted 15 February, 2024;
originally announced February 2024.
-
Electrical conductivity of MgSiO3 at high temperatures and pressures: implications for the Earth's mantle
Authors:
Samuel S. M. Santos,
Lucy V. C. Assali,
João F. Justo
Abstract:
The electrical conductivity of magnesium silicate MgSiO3 has been studied, using the framework of the first-principles density functional theory and the Boltzmann transport theory, under the thermodynamic conditions of the Earth's lower mantle. We find that the conductivity of pristine MgSiO3 depends strongly on the structural phase of the material, as well as on temperature and pressure. The cond…
▽ More
The electrical conductivity of magnesium silicate MgSiO3 has been studied, using the framework of the first-principles density functional theory and the Boltzmann transport theory, under the thermodynamic conditions of the Earth's lower mantle. We find that the conductivity of pristine MgSiO3 depends strongly on the structural phase of the material, as well as on temperature and pressure. The conductivity of the perovskite phase increases with increasing pressure (depth of the lower mantle) up to 90 GPa, then decreases at higher pressures due to a change in the material's band gap transition from direct to indirect. Finally, the structural phase transition that MgSiO3 undergoes near the bottom of the lower mantle, from perovskite to post-perovskite, causes an increase in the conductivity of MgSiO3, which should contribute to the increase in the electrical conductivity of the Earth's mantle under the thermodynamic conditions of the Earth's D" layer.
△ Less
Submitted 6 February, 2024;
originally announced February 2024.
-
Doped 2D diamond: properties and applications
Authors:
Bruno Ipaves,
João F. Justo,
Biplab Sanyal,
Lucy V. C. Assali
Abstract:
In the present paper, we investigate the structural, thermodynamic, dynamic, elastic, and electronic properties of doped 2D diamond C$_4$X$_2$ (X = B or N) nanosheets in both AA$'$A$''$ and ABC stacking configurations, by first-principles calculations. Those systems are composed of 3 diamond-like graphene sheets, with an undoped graphene layer between two 50% doped ones. Our results, based on the…
▽ More
In the present paper, we investigate the structural, thermodynamic, dynamic, elastic, and electronic properties of doped 2D diamond C$_4$X$_2$ (X = B or N) nanosheets in both AA$'$A$''$ and ABC stacking configurations, by first-principles calculations. Those systems are composed of 3 diamond-like graphene sheets, with an undoped graphene layer between two 50% doped ones. Our results, based on the analysis of ab-initio molecular dynamics simulations, phonon dispersion spectra, and Born's criteria for mechanical stability, revealed that all four structures are stable. Additionally, their standard enthalpy of formation values are similar to the one of pristine 2D diamond, recently synthesized by compressing three graphene layers. The C$_4$X$_2$ (X = B or N) systems exhibit high elastic constant values and stiffness comparable to the diamond. The C$_4$N$_2$ nanosheets present wide indirect band gaps that could be advantageous for applications similar to the ones of the hexagonal boron nitride (h-BN), such as a substrate for high-mobility 2D devices. On the other hand, the C$_4$B$_2$ systems are semiconductors with direct band gaps, in the 1.6 - 2.0 eV range, and small effective masses, which are characteristics that may be favorable to high carrier mobility and optoelectronics applications.
△ Less
Submitted 17 August, 2023; v1 submitted 31 July, 2023;
originally announced August 2023.
-
Pressure-Induced Phase Transformations of Quasi-2D Sr$_3$Hf$_2$O$_7$
Authors:
M. C. B. Barbosa,
E. Lora da Silva,
P. Neenu Lekshmi,
M. L. Marcondes,
L. V. C. Assali,
H. M. Petrilli,
A. M. L. Lopes,
J. P. Araújo
Abstract:
We present an \textit{ab-initio} study of the quasi-2D layered perovskite Sr$_3$Hf$_2$O$_7$ com\-pound, performed within the framework of the Density Functional Theory and lattice dynamics analysis. At high temperatures, this compound takes a \textit{I4/mmm} centrosym\-met\-ric structure (S.G. n. 139); as the temperature is lowered, the symmetry is broken into other intermediate polymorphs before…
▽ More
We present an \textit{ab-initio} study of the quasi-2D layered perovskite Sr$_3$Hf$_2$O$_7$ com\-pound, performed within the framework of the Density Functional Theory and lattice dynamics analysis. At high temperatures, this compound takes a \textit{I4/mmm} centrosym\-met\-ric structure (S.G. n. 139); as the temperature is lowered, the symmetry is broken into other intermediate polymorphs before reaching the ground state structure, which is the \textit{Cmc2$_1$} ferroelectric phase (S.G. n. 36). One of these intermediate polymorphs is the \textit{Ccce} structural phase (S.G. n. 68). Additionally, we have probed the \textit{C2/c} system (S.G n. 15), which was obtained by following the atomic displacements corresponding to the eigenvectors of the imaginary frequency mode localized at the $\mathbfΓ$-point of the \textit{Ccce} phase. By observing the enthalpies at low pressures, we found that the \textit{Cmc2$_1$} phase is thermodynamically the most stable. Our results show that the \textit{I4/mmm} and \textit{C2/c} phases never stabilize in the 0-20 GPa range of pressure values. On the other hand, the \textit{Ccce} phase becomes energetically more stable at around 17 GPa, surpassing the \textit{Cmc2$_1$} structure. By considering the effect of entropy and the constant-volume free energies, we observe that the \textit{Cmc2$_1$} polymorph is energetically the most stable phase at low temperature; however, at 350 K the \textit{Ccce} system becomes the most stable. By probing the volume-dependent free energies at 19 GPa, we see that \textit{Ccce} is always the most stable phase between the two structures and also throughout the studied temperature range. When analyzing the phonon dispersion frequencies, we conclude that the \textit{Ccce} system becomes dynamically stable only around 19-20 GPa, and that the \textit{Cmc2$_1$} phase, is metastable up to 30 GPa.
△ Less
Submitted 7 June, 2023;
originally announced June 2023.
-
Aluminum functionalized silicene: a potential anode material for alkali metal ion batteries
Authors:
Bruno Ipaves,
João F. Justo,
Lucy V. C. Assali
Abstract:
We have investigated the possibility of using aluminum functionalized silicene trilayers (ABC-Si$_4$Al$_2$) as an anode material for alkali metal ion batteries (AMIBs). First, we studied the thermodynamic stability of ABC-Si$_4$Al$_2$ using ab-initio molecular dynamics simulations, showing that this material remains stable up to 600 K. Then, we explored the properties of alkali metal atoms (Li, Na…
▽ More
We have investigated the possibility of using aluminum functionalized silicene trilayers (ABC-Si$_4$Al$_2$) as an anode material for alkali metal ion batteries (AMIBs). First, we studied the thermodynamic stability of ABC-Si$_4$Al$_2$ using ab-initio molecular dynamics simulations, showing that this material remains stable up to 600 K. Then, we explored the properties of alkali metal atoms (Li, Na, K) adsorption in ABC-Si$_4$Al$_2$, finding several available sites with high adsorption energies. Moreover, we computed the diffusion properties of those atoms along high-symmetry paths using the nudged elastic band method. The results indicated diffusion barriers as low as those in graphite, especially for Na (0.32 eV) and K (0.22 eV), which allows those ions to migrate easily on the material's surface. Our studies also revealed that the full loaded Li$_4$Si$_4$Al$_2$, Na$_2$Si$_4$Al$_2$, and K$_2$Si$_4$Al$_2$ systems provide low open-circuit voltage, ranging from 0.14 to 0.49 V, and large theoretical capacity of 645 mAh/g for Li- and 322 mAh/g for Na- and K-ion batteries, values that are close to the ones in other anode materials, such as graphite, TiO$_2$, and silicene-based systems. Those results indicate that aluminum functionalized few-layer silicene is a promising material for AMIBs anodes, particularly for Na- and K-ion batteries.
△ Less
Submitted 17 June, 2022;
originally announced June 2022.
-
Functionalized few-layer silicene nanosheets: density functional theory on stability, structural, and electronic properties
Authors:
Bruno Ipaves,
João F. Justo,
Lucy V. C. Assali
Abstract:
Using density functional theory calculations, we investigated the properties of few-layer silicene nanosheets, namely bilayers and trilayers, functionalized with group-III or group-V atoms of the periodic table. We considered the Si$_2$X$_2$ bilayers and the Si$_2$X$_4$ trilayers, X = B, N, Al, P. We computed the structural, energetic, dynamic, elastic, and electronic properties of those systems i…
▽ More
Using density functional theory calculations, we investigated the properties of few-layer silicene nanosheets, namely bilayers and trilayers, functionalized with group-III or group-V atoms of the periodic table. We considered the Si$_2$X$_2$ bilayers and the Si$_2$X$_4$ trilayers, X = B, N, Al, P. We computed the structural, energetic, dynamic, elastic, and electronic properties of those systems in several stacking configurations, labeled as AA$'$, AB, AA$'$A$''$, and ABC. The results revealed that AA$'$-Si$_2$N$_2$, AB-Si$_2$N$_2$, AA$'$-Si$_2$P$_2$, AB-Si$_2$P$_2$, ABC-Si$_4$B$_2$, ABC-Si$_4$Al$_2$, AA$'$A$''$-Si$_4$P$_2$, and ABC-Si$_4$P$_2$ nanosheets are all dynamically stable, according to their respective phonon dispersion spectra. Additionally, by comparing the standard enthalpies of formation of doped few-layer silicene systems with the ones of the pristine silicene monolayer, bilayer, and trilayer nanosheets, we found that those structures could be experimentally accessed. Exploring the electronic properties of those stable systems, we discovered that the silicene bilayers and trilayers functionalized with N or P atoms change from a metallic to a semiconducting behavior. However, the metallic behavior is kept when the nanosheets are functionalized with B or Al atoms. Finally, by placing our results within the context of silicon-based systems previous investigations, we could envision potential applications for those nanosheets in van der Waals heterostructures, alkali-metal ion batteries, UV-light devices, and thermoelectric materials.
△ Less
Submitted 15 November, 2021;
originally announced November 2021.
-
Carbon-related Bilayers: Nanoscale Building Blocks for Self-Assembly Nanomanufacturing
Authors:
B. Ipaves,
J. F. Justo,
L. V. C. Assali
Abstract:
Using a first-principles total energy methodology, we investigated the properties of graphene-like carbon mono and bilayers, functionalized with nitrogen and boron atoms. The resulting stable structures were explored in terms of their potential use as nanoscale two-dimensional building blocks for self-assembly of macroscopic structures. We initially considered graphene monolayers functionalized wi…
▽ More
Using a first-principles total energy methodology, we investigated the properties of graphene-like carbon mono and bilayers, functionalized with nitrogen and boron atoms. The resulting stable structures were explored in terms of their potential use as nanoscale two-dimensional building blocks for self-assembly of macroscopic structures. We initially considered graphene monolayers functionalized with nitrogen and boron, but none of them was dynamically stable, in terms of the respective layer phonon spectra. Then, we considered the functionalized graphene-like bilayers (labeled as NCCN, NCNC, BCCB, and NCCB), analyzing their stability, electronic and mechanical properties, and chemical reactivity. We found that while the NCCN, NCNC, and NCCB bilayers were stable, the BCCB one was not. Additionally, the NCCN and NCCB bilayers were explored as potential two-dimensional building blocks for nanostructure self-assembly, which could form stable bulk structures. Particularly, the NCCB bilayer seemed the best choice as a building block, since the resulting 3D crystals, formed by stacking NCCB bilayers, were energetically stable.
△ Less
Submitted 11 September, 2019; v1 submitted 16 August, 2019;
originally announced August 2019.
-
Stability of calcium and magnesium carbonates at lower mantle thermodynamic conditions
Authors:
Samuel S. M. Santos,
Michel L. Marcondes,
João F. Justo,
Lucy V. C. Assali
Abstract:
We present a theoretical investigation, based on ab initio calculations and the quasi-harmonic approximation, on the stability properties of magnesium (MgCO$_3$) and calcium (CaCO$_3$) carbonates at high temperatures and pressures. The results indicate that those carbonates should be stable in Earth's lower mantle, instead of dissociating into other minerals, in chemical environments with excesses…
▽ More
We present a theoretical investigation, based on ab initio calculations and the quasi-harmonic approximation, on the stability properties of magnesium (MgCO$_3$) and calcium (CaCO$_3$) carbonates at high temperatures and pressures. The results indicate that those carbonates should be stable in Earth's lower mantle, instead of dissociating into other minerals, in chemical environments with excesses of SiO$_2$, MgO, or MgSiO$_3$. Therefore, considering the lower mantle chemical composition, filled with major minerals such as MgSiO$_3$ and MgO, calcium and magnesium carbonates are the primary candidates as carbon hosts in that region. For the thermodynamic conditions of the mantle, the results also indicate that carbon should be primarily hosted on MgCO$_3$. Finally, the results indicate that carbon, in the form of free CO$_2$, is unlikely in the lower mantle.
△ Less
Submitted 19 April, 2018;
originally announced April 2018.
-
Importance of van der Waals interaction on structural, vibrational, and thermodynamics properties of NaCl
Authors:
Michel L. Marcondes,
Renata M. Wentzcovitch,
Lucy V. C. Assali
Abstract:
Thermal equations of state (EoS) are essential in several scientific domains. However, experimental determination of EoS parameters may be limited at extreme conditions, therefore, {\it ab~initio} calculations have become an important method to obtain them. Density Functional Theory (DFT) and its extensions with various degrees of approximations for the exchange and correlation (XC) energy is the…
▽ More
Thermal equations of state (EoS) are essential in several scientific domains. However, experimental determination of EoS parameters may be limited at extreme conditions, therefore, {\it ab~initio} calculations have become an important method to obtain them. Density Functional Theory (DFT) and its extensions with various degrees of approximations for the exchange and correlation (XC) energy is the method of choice, but large errors in the EoS parameters are still common. The alkali halides have been problematic from the onset of this field and the quest for appropriate DFT functionals for such ionic and relatively weakly bonded systems has remained an active topic of research. Here we use DFT + van der Waals functionals to calculate vibrational properties, thermal EoS, thermodynamic properties, and the B1 to B2 phase boundary of NaCl. Our results reveal i) a remarkable improvement over the performance of standard Local Density Approximation and Generalized Gradient Approximation functionals for all these properties and phase transition boundary, as well as ii) great sensitivity of anharmonic effects on the choice of XC functional.
△ Less
Submitted 7 November, 2017;
originally announced November 2017.
-
A general procedure for accurate defect excitation energies from DFT-1/2 band structures: The case of NV$^-$ center in diamond
Authors:
Bruno Lucatto,
Lucy V. C. Assali,
Ronaldo Rodrigues Pela,
Marcelo Marques,
Lara K. Teles
Abstract:
A major challenge in creating a quantum computer is to find a quantum system that can be used to implement the qubits. For this purpose, deep centers are prominent candidates, and ab initio calculations are one of the most important tools to theoretically study their properties. However, these calculations are highly involved, due to the large supercell needed, and the computational cost can be ev…
▽ More
A major challenge in creating a quantum computer is to find a quantum system that can be used to implement the qubits. For this purpose, deep centers are prominent candidates, and ab initio calculations are one of the most important tools to theoretically study their properties. However, these calculations are highly involved, due to the large supercell needed, and the computational cost can be even larger when one goes beyond the Kohn-Sham scheme to correct the band gap problem and achieve good accuracy. In this work, we present a method that overcomes these problems and provides the optical transition energies as a difference of Kohn-Sham eigenvalues; and even more, provides a complete and accurate band structure of the defect in the semiconductor. Despite the original motivations, the presented methodology is a general procedure, which can be used to systematically study the optical transitions between localized levels within the band gap of any system. The method is an extension of the low-cost and parameter-free DFT-1/2 approximate quasi-particle correction, and allows it to be applied in the study of complex defects. As a benchmark, we apply the method to the NV$^-$ center in diamond. The agreement with experiments is remarkable, with an accuracy of 0.1 eV. The band structure agrees with the expected qualitative features of this system, and thus provides a good intuitive physical picture by itself.
△ Less
Submitted 13 August, 2017; v1 submitted 30 May, 2017;
originally announced May 2017.
-
3d transition metal impurities in diamond: electronic properties and chemical trends
Authors:
L. V. C. Assali,
W. V. M. Machado,
J. F. Justo
Abstract:
First principles calculations have been used to investigate the trends on the properties of isolated 3d transition metal impurities (from Sc to Cu) in diamond. Those impurities have small formation energies in the substitutional or double semi-vacancy sites, and large energies in the interstitial one. Going from Sc to Cu, the 3d-related energy levels in the bandgap move from the top of the bandgap…
▽ More
First principles calculations have been used to investigate the trends on the properties of isolated 3d transition metal impurities (from Sc to Cu) in diamond. Those impurities have small formation energies in the substitutional or double semi-vacancy sites, and large energies in the interstitial one. Going from Sc to Cu, the 3d-related energy levels in the bandgap move from the top of the bandgap toward the valence band in all three sites. Trends in electronic properties and transition energies of the impurities, in the substitutional or interstitial sites, are well described by a simple microscopic model considering the electronic occupation of the 3d-related levels. On the other hand, for the impurities in the double semi-vacancy site, there is a weak interaction between the divacancy- and the 3d-related orbitals, resulting in in vacancy- and 3d-related levels in the materials bandgap.
△ Less
Submitted 11 July, 2013;
originally announced July 2013.
-
Stability and plasticity of silicon nanowires: the role of wire perimeter
Authors:
J. . F. Justo,
R. D. Menezes,
L. V. C. Assali
Abstract:
We investigated the properties of stability and plasticity of silicon nanowires using molecular dynamics simulations. We considered nanowires with <100>, <110> and <112> growth directions with several diameters and surface facet configurations. We found that the wire perimeter, and not the wire diameter, is the meaningful dimensional parameter. As a result, the surface facets play a central role o…
▽ More
We investigated the properties of stability and plasticity of silicon nanowires using molecular dynamics simulations. We considered nanowires with <100>, <110> and <112> growth directions with several diameters and surface facet configurations. We found that the wire perimeter, and not the wire diameter, is the meaningful dimensional parameter. As a result, the surface facets play a central role on the nanowire energy, that follows a universal scaling law. Additionally, we have computed the response of a silicon nanowire to external load. The results were compared to available experimental and ab initio data.
△ Less
Submitted 11 July, 2013;
originally announced July 2013.
-
Lanthanide impurities in wide bandgap semiconductors: a possible roadmap for spintronic devices
Authors:
G. Caroena,
W. V. M. Machado,
J. F. Justo,
L. V. C. Assali
Abstract:
The electronic properties of lanthanide (from Eu to Tm) impurities in wurtzite gallium nitride and zinc oxide were investigated by first principles calculations, using an all electron methodology plus a Hubbard potential correction. The results indicated that the 4f-related energy levels remain outside the bandgap in both materials, in good agreement with a recent phenomenological model, based on…
▽ More
The electronic properties of lanthanide (from Eu to Tm) impurities in wurtzite gallium nitride and zinc oxide were investigated by first principles calculations, using an all electron methodology plus a Hubbard potential correction. The results indicated that the 4f-related energy levels remain outside the bandgap in both materials, in good agreement with a recent phenomenological model, based on experimental data. Additionally, zinc oxide doped with lanthanide impurities became an n-type material, showing a coupling between the 4f-related spin polarized states and the carriers. This coupling may generate spin polarized currents, which could lead to applications in spintronic devices.
△ Less
Submitted 11 July, 2013;
originally announced July 2013.
-
Cobalt-related impurity centers in diamond: electronic properties and hyperfine parameters
Authors:
R. Larico,
L. V. C. Assali,
W. V. M. Machado,
J. F. Justo
Abstract:
Cobalt-related impurity centers in diamond have been studied using first principles calculations. We computed the symmetry, formation and transition energies, and hyperfine parameters of cobalt impurities in isolated configurations and in complexes involving vacancies and nitrogen atoms. We found that the Co impurity in a divacant site is energetically favorable and segregates nitrogen atoms in it…
▽ More
Cobalt-related impurity centers in diamond have been studied using first principles calculations. We computed the symmetry, formation and transition energies, and hyperfine parameters of cobalt impurities in isolated configurations and in complexes involving vacancies and nitrogen atoms. We found that the Co impurity in a divacant site is energetically favorable and segregates nitrogen atoms in its neighborhood. Our results were discussed in the context of the recently observed Co-related electrically active centers in synthetic diamond.
△ Less
Submitted 10 July, 2013;
originally announced July 2013.
-
Spin states of iron impurities in magnesium oxide under pressure: A possible intermediate state
Authors:
R. Larico,
L. V. C. Assali,
J. F. Justo
Abstract:
Ferropericlase (Mg,Fe)O is a major lower mantle mineral, and studying its properties is a fundamental step toward understanding the Earth's interior. Here, we performed a first-principles investigation on the properties of iron as an isolated impurity in magnesium oxide, which is the condition of ferropericlase under which iron-iron interactions could be neglected. The calculations were carried us…
▽ More
Ferropericlase (Mg,Fe)O is a major lower mantle mineral, and studying its properties is a fundamental step toward understanding the Earth's interior. Here, we performed a first-principles investigation on the properties of iron as an isolated impurity in magnesium oxide, which is the condition of ferropericlase under which iron-iron interactions could be neglected. The calculations were carried using the all-electron full-potential linearized augmented plane wave method within the density functional theory in the generalized gradient approximation plus the on-site Hubbard correction. We present the electronic and magnetic properties, electric and magnetic hyperfine splitting of this impurity in high and low spin states for several charge states at zero pressure, which were then extended to high pressures. For the impurity in the neutral charge state, our results indicated that there is a metastable intermediate spin state (S=1), in addition to the high (S=2) and low (S=0) spin states. Those results were discussed in the context of an intermediate spin state, experimentally identified in ferrosilicate perovskite.
△ Less
Submitted 8 April, 2013;
originally announced April 2013.
-
Electronic properties and hyperfine fields of nickel-related complexes in diamond
Authors:
R. Larico,
J. F. Justo,
W. V. M. Machado,
L. V. C. Assali
Abstract:
We carried out a first principles investigation on the microscopic properties of nickel-related defect centers in diamond. Several configurations, involving substitutional and interstitial nickel impurities, have been considered either in isolated configurations or forming complexes with other defects, such as vacancies and boron and nitrogen dopants. The results, in terms of spin, symmetry, and h…
▽ More
We carried out a first principles investigation on the microscopic properties of nickel-related defect centers in diamond. Several configurations, involving substitutional and interstitial nickel impurities, have been considered either in isolated configurations or forming complexes with other defects, such as vacancies and boron and nitrogen dopants. The results, in terms of spin, symmetry, and hyperfine fields, were compared with the available experimental data on electrically active centers in synthetic diamond. Several microscopic models, previously proposed to explain those data, have been confirmed by this investigation, while some models could be discarded. We also provided new insights on the microscopic structure of several of those centers.
△ Less
Submitted 15 August, 2012;
originally announced August 2012.
-
Functionalized adamantane: fundamental building blocks for nanostructure self-assembly
Authors:
Joelson Cott Garcia,
João F. Justo,
Wanda V. M. Machado,
Lucy V. C. Assali
Abstract:
We report first principles calculations on the electronic and structural properties of chemically functionalized adamantane molecules, either in isolated or crystalline forms. Boron and nitrogen functionalized molecules, aza-, tetra-aza-, bora-, and tetra-bora-adamantane, were found to be very stable in terms of energetics, consistent with available experimental data. Additionally, a hypothetical…
▽ More
We report first principles calculations on the electronic and structural properties of chemically functionalized adamantane molecules, either in isolated or crystalline forms. Boron and nitrogen functionalized molecules, aza-, tetra-aza-, bora-, and tetra-bora-adamantane, were found to be very stable in terms of energetics, consistent with available experimental data. Additionally, a hypothetical molecular crystal in a zincblende structure, involving the pair tetra-bora-adamantane and tetra-aza-adamantane, was investigated. This molecular crystal presented a direct and large electronic bandgap and a bulk modulus of 20 GPa. The viability of using those functionalized molecules as fundamental building blocks for nanostructure self-assembly is discussed.
△ Less
Submitted 13 April, 2012;
originally announced April 2012.
-
Structural, Electronic, and Vibrational Properties of Amino-adamantane and Rimantadine Isomers
Authors:
Joelson Cott Garcia,
João F. Justo,
Wanda V. M. Machado,
Lucy V. C. Assali
Abstract:
We performed a first principles total energy investigation on the structural, electronic, and vibrational properties of adamantane molecules, functionalized with amine and ethanamine groups. We computed the vibrational signatures of amantadine and rimantadine isomers with the functional groups bonded to different carbon sites. By comparing our results with recent infrared and Raman spectroscopic d…
▽ More
We performed a first principles total energy investigation on the structural, electronic, and vibrational properties of adamantane molecules, functionalized with amine and ethanamine groups. We computed the vibrational signatures of amantadine and rimantadine isomers with the functional groups bonded to different carbon sites. By comparing our results with recent infrared and Raman spectroscopic data, we discuss the possible presence of different isomers in experimental samples.
△ Less
Submitted 13 April, 2012;
originally announced April 2012.
-
Group-IV graphene- and graphane-like nanosheets
Authors:
Joelson Cott Garcia,
Denille B. de Lima,
Lucy V. C. Assali,
João F. Justo
Abstract:
We performed a first principles investigation on the structural and electronic properties of group-IV (C, SiC, Si, Ge, and Sn) graphene-like sheets in flat and buckled configurations and the respective hydrogenated or fluorinated graphane-like ones. The analysis on the energetics, associated with the formation of those structures, showed that fluorinated graphane-like sheets are very stable, and s…
▽ More
We performed a first principles investigation on the structural and electronic properties of group-IV (C, SiC, Si, Ge, and Sn) graphene-like sheets in flat and buckled configurations and the respective hydrogenated or fluorinated graphane-like ones. The analysis on the energetics, associated with the formation of those structures, showed that fluorinated graphane-like sheets are very stable, and should be easily synthesized in laboratory. We also studied the changes on the properties of the graphene-like sheets, as result of hydrogenation or fluorination. The interatomic distances in those graphane-like sheets are consistent with the respective crystalline ones, a property that may facilitate integration of those sheets within three-dimensional nanodevices.
△ Less
Submitted 12 April, 2012;
originally announced April 2012.
-
Crystal engineering using functionalized adamantane
Authors:
Joelson Cott Garcia,
L. V. C. Assali,
W. V. M. Machado,
J. F. Justo
Abstract:
We performed a first principles investigation on the structural, electronic, and optical properties of crystals made of chemically functionalized adamantane molecules. Several molecular building blocks, formed by boron and nitrogen substitutional functionalizations, were considered to build zincblende and wurtzite crystals, and the resulting structures presented large bulk moduli and cohesive ener…
▽ More
We performed a first principles investigation on the structural, electronic, and optical properties of crystals made of chemically functionalized adamantane molecules. Several molecular building blocks, formed by boron and nitrogen substitutional functionalizations, were considered to build zincblende and wurtzite crystals, and the resulting structures presented large bulk moduli and cohesive energies, wide and direct bandgaps, and low dielectric constants (low-$κ$ materials). Those properties provide stability for such structures up to room temperature, superior to those of typical molecular crystals. This indicates a possible road map for crystal engineering using functionalized diamondoids, with potential applications ranging from space filling between conducting wires in nanodevices to nano-electro-mechanical systems.
△ Less
Submitted 12 April, 2012;
originally announced April 2012.
-
The structural and electronic properties of tin oxide nanowires: an {\it ab initio} investigation
Authors:
Joelson Cott Garcia,
Lucy Vitoria Credidio Assali,
Joao Francisco Justo Filho
Abstract:
We performed an {\it ab initio} investigation on the properties of rutile tin oxide (SnO$_{x}$) nanowires. We computed the wire properties determining the equilibrium geometries, binding energies and electronic band structures for several wire dimensions and surface facet configurations. The results allowed to establish scaling laws for the structural properties, in terms of the nanowire perimeter…
▽ More
We performed an {\it ab initio} investigation on the properties of rutile tin oxide (SnO$_{x}$) nanowires. We computed the wire properties determining the equilibrium geometries, binding energies and electronic band structures for several wire dimensions and surface facet configurations. The results allowed to establish scaling laws for the structural properties, in terms of the nanowire perimeters. The results also showed that the surface states control most of the electronic properties of the nanowires. Oxygen incorporation in the nanowire surfaces passivated the surface-related electronic states, and the resulting quantum properties and scaling laws were fully consistent with electrons confined inside the nanowire. Additionally, oxygen incorporation in the wire surfaces generated an unbalanced concentration of spin up and down electrons, leading to magnetic states for the nanowires.
△ Less
Submitted 11 April, 2012;
originally announced April 2012.
-
Hyperfine interactions in silicon quantum dots
Authors:
Lucy V. C. Assali,
Helena M. Petrilli,
Rodrigo B. Capaz,
Belita Koiller,
Xuedong Hu,
S. Das Sarma
Abstract:
We present an all-electron calculation of the hyperfine parameters for conduction electrons in Si, showing that: (i) all parameters scale linearly with the spin density at a $^{29}$Si site; (ii) the isotropic term is over 30 times larger than the anisotropic part; (iii) conduction electron charge density at a Si nucleus is consistent with experimental estimates; (iv) Overhauser fields in natural S…
▽ More
We present an all-electron calculation of the hyperfine parameters for conduction electrons in Si, showing that: (i) all parameters scale linearly with the spin density at a $^{29}$Si site; (ii) the isotropic term is over 30 times larger than the anisotropic part; (iii) conduction electron charge density at a Si nucleus is consistent with experimental estimates; (iv) Overhauser fields in natural Si quantum dots (QDs) are two orders of magnitude smaller than in GaAs QDs. This reinforces the outstanding performance of Si in kee** spin coherence and opens access to reliable quantitative information aiming at spintronic applications.
△ Less
Submitted 7 May, 2011; v1 submitted 6 July, 2010;
originally announced July 2010.
