-
Giant anomalous Hall effect in epitaxial Mn$_{3.2}$Ge films with a cubic kagome structure
Authors:
J. S. R. McCoombs,
B. D. MacNeil,
V. Askarpour,
J. Myra,
H. Herdin,
M. Pula,
M. D. Robertson,
G. M. Luke,
K. L. Kavanagh,
J. Maassen,
T. L. Monchesky
Abstract:
We report on the first example of epitaxial Mn$_{3 + δ}$Ge thin films with a cubic $L1_2$ structure. The films are found to exhibit frustrated ferromagnetism with an average magnetization corresponding to 0.98$~\pm~$0.06$~μ_B$/Mn, far larger than the parasitic ferromagnetism in hexagonal Mn$_3$Ge and the partially compensated ferrimagnetism in tetragonal Mn$_3$Ge. The Hall conductivity is the larg…
▽ More
We report on the first example of epitaxial Mn$_{3 + δ}$Ge thin films with a cubic $L1_2$ structure. The films are found to exhibit frustrated ferromagnetism with an average magnetization corresponding to 0.98$~\pm~$0.06$~μ_B$/Mn, far larger than the parasitic ferromagnetism in hexagonal Mn$_3$Ge and the partially compensated ferrimagnetism in tetragonal Mn$_3$Ge. The Hall conductivity is the largest reported for the kagome magnets with a low temperature value of $σ_{xy} = 1587~$S/cm. Density functional calculations predict that a chiral antiferromagnetic structure is lower in energy than a ferromagnetic configuration in an ordered stoichiometric crystal. However, chemical disorder driven by the excess Mn in our films explains why a frustrated 120$^\circ$ spin structure is not observed. Comparisons between the magnetization and the Hall resistivity indicate that a non-coplanar spin structure contributes the Hall signal. Anisotropic magnetoresistance and planar Hall effect with hysteresis up to 14 T provides further insights into this material.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
The $ε$-$ζ$ Transition in Solid Oxygen
Authors:
Sabri F. Elatresh,
V. Askarpour,
S. A. Bonev
Abstract:
The structure of solid oxygen has been studied at pressures from 50 to 140~GPa using static structure search methods and molecular dynamics simulations with density functional theory and a hybrid exchange functional. Several crystalline structures with space group symmetries {\it Pnma}, {\it P}\,2$_{1}${\it /m}, {\it Pm} and {\it P}\,6$_3$/{\it mmc} have been identified as candidates for the $ζ$ p…
▽ More
The structure of solid oxygen has been studied at pressures from 50 to 140~GPa using static structure search methods and molecular dynamics simulations with density functional theory and a hybrid exchange functional. Several crystalline structures with space group symmetries {\it Pnma}, {\it P}\,2$_{1}${\it /m}, {\it Pm} and {\it P}\,6$_3$/{\it mmc} have been identified as candidates for the $ζ$ phase of oxygen at 0~K. Within the hybrid exchange functional framework and at 300~K temperature, {\it Pm} is shown to be energetically most favorable above 111~GPa. A comparison with experimental X-ray diffraction, spectroscopic and superconductivity measurements is provided for all competing structures.
△ Less
Submitted 25 September, 2023;
originally announced September 2023.
-
First-principles analysis of intravalley and intervalley electron-phonon scattering in thermoelectric materials
Authors:
Vahid Askarpour,
Jesse Maassen
Abstract:
Intervalley collisions, which scatter electrons from one valley or band to another, can be detrimental to thermoelectric performance in materials with multiple valleys/bands. In this study, density functional theory is used to investigate the electron-phonon scattering characteristics of three lead chalcogenides (PbS, PbSe, PbTe) and three half-Heuslers (ScNiBi, ScPdSb, ZrNiSn), which all possess…
▽ More
Intervalley collisions, which scatter electrons from one valley or band to another, can be detrimental to thermoelectric performance in materials with multiple valleys/bands. In this study, density functional theory is used to investigate the electron-phonon scattering characteristics of three lead chalcogenides (PbS, PbSe, PbTe) and three half-Heuslers (ScNiBi, ScPdSb, ZrNiSn), which all possess multiple equivalent conduction valleys, in order to characterize and analyze their intravalley/intervalley components. To elucidate what controls the degree of intravalley and intervalley transitions, the scattering rates are decomposed into the product of the phase space (a measure of how much scattering is possible) and the average electron-phonon coupling. To help guide the search for improved thermoelectric and high-conductivity materials, simple and approximate approaches are demonstrated that can be adopted to identify materials with reduced intervalley scattering, which circumvent the need for computationally-demanding electron-phonon scattering calculations. In addition, the benefits of selecting materials with large-energy zone-edge phonons are explored in the limit $\hbarω\gg k_BT$, and found to potentially suppress intervalley processes by up to an order of magnitude, leading to a 70% and 100% increase in conductivity and power factor, respectively.
△ Less
Submitted 10 September, 2022;
originally announced September 2022.
-
A Gate-All-Around Single-Channel In2O3 Nanoribbon FET with Near 20 mA/μm Drain Current
Authors:
Zhuocheng Zhang,
Zehao Lin,
Pai-Ying Liao,
Vahid Askarpour,
Hongyi Dou,
Zhongxia Shang,
Adam Charnas,
Mengwei Si,
Sami Alajlouni,
**hyun Noh,
Ali Shakouri,
Haiyan Wang,
Mark Lundstrom,
Jesse Maassen,
Peide D. Ye
Abstract:
In this work, we demonstrate atomic-layer-deposited (ALD) single-channel indium oxide (In2O3) gate-all-around (GAA) nanoribbon FETs in a back-end-of-line (BEOL) compatible process. A maximum on-state current (ION) of 19.3 mA/μm (near 20 mA/μm) is achieved in an In2O3 GAA nanoribbon FET with a channel thickness (TIO) of 3.1 nm, channel length (Lch) of 40 nm, channel width (Wch) of 30 nm and dielect…
▽ More
In this work, we demonstrate atomic-layer-deposited (ALD) single-channel indium oxide (In2O3) gate-all-around (GAA) nanoribbon FETs in a back-end-of-line (BEOL) compatible process. A maximum on-state current (ION) of 19.3 mA/μm (near 20 mA/μm) is achieved in an In2O3 GAA nanoribbon FET with a channel thickness (TIO) of 3.1 nm, channel length (Lch) of 40 nm, channel width (Wch) of 30 nm and dielectric HfO2 of 5 nm. The record high drain current obtained from an In2O3 FET is about one order of magnitude higher than any conventional single-channel semiconductor FETs. This extraordinary drain current and its related on-state performance demonstrate ALD In2O3 is a promising oxide semiconductor channel with great opportunities in BEOL compatible monolithic 3D integration.
△ Less
Submitted 30 April, 2022;
originally announced May 2022.
-
A Nanometer-Thick Oxide Semiconductor Transistor with Ultra-High Drain Current
Authors:
Zehao Lin,
Mengwei Si,
Vahid Askarpour,
Chang Niu,
Adam Charnas,
Zhongxia Shang,
Yizhi Zhang,
Yaoqiao Hu,
Zhuocheng Zhang,
Pai-Ying Liao,
Kyeongjae Cho,
Haiyan Wang,
Mark Lundstrom,
Jesse Maassen,
Peide D. Ye
Abstract:
High drive current is a critical performance parameter in semiconductor devices for high-speed, low-power logic applications or high-efficiency, high-power, high-speed radio frequency (RF) analog applications. In this work, we demonstrate an In2O3 transistor grown by atomic layer deposition (ALD) at back-end-of-line (BEOL) compatible temperatures with a record high drain current exceeding 10 A/mm,…
▽ More
High drive current is a critical performance parameter in semiconductor devices for high-speed, low-power logic applications or high-efficiency, high-power, high-speed radio frequency (RF) analog applications. In this work, we demonstrate an In2O3 transistor grown by atomic layer deposition (ALD) at back-end-of-line (BEOL) compatible temperatures with a record high drain current exceeding 10 A/mm, the performance of which is 2-3 times better than all known transistors with semiconductor channels. A record high transconductance of 4 S/mm is also achieved among all transistors with a planar structure. It is found that a high carrier density and high electron velocity both contribute to this remarkably high on-state performance in ALD In2O3 transistors, which is made possible by the high-quality oxide/oxide interface, the metal-like charge-neutrality-level (CNL) alignment, and the high band velocities induced by the low density-of-state (DOS). Experimental Hall, I-V and split C-V measurements at room temperature confirm a high carrier density up to 6-7*10^13 /cm2 and a high velocity of about 10^7 cm/s. Ultra-thin oxide semiconductors, with a CNL located deep inside the conduction band, represent a promising new direction for the search of alternative channel materials for high-performance semiconductor devices.
△ Less
Submitted 30 April, 2022;
originally announced May 2022.
-
Unusual thermoelectric transport anisotropy in quasi-2D, rhombohedral GeTe
Authors:
Vahid Askarpour,
Jesse Maassen
Abstract:
In this study, we calculate the $T$=300 K scattering and thermoelectric transport properties of rhombohedral GeTe using first-principles modeling. The room-temperature phase of GeTe has a layered structure, with cross-plane and in-plane directions oriented parallel and perpendicular to [111], respectively. Based on rigorous electron-phonon scattering, our transport calculations reveal unusual anis…
▽ More
In this study, we calculate the $T$=300 K scattering and thermoelectric transport properties of rhombohedral GeTe using first-principles modeling. The room-temperature phase of GeTe has a layered structure, with cross-plane and in-plane directions oriented parallel and perpendicular to [111], respectively. Based on rigorous electron-phonon scattering, our transport calculations reveal unusual anisotropic properties; n-type GeTe has a cross-plane electrical conductivity that is roughly 3$\times$ larger than in-plane. p-type GeTe, however, displays opposite anisotropy with in-plane conducting roughly 2$\times$ more than cross-plane, as is expected in quasi-2D materials. The power factor shows the same anisotropy as the electrical conductivity, since the Seebeck coefficient is relatively isotropic. Interestingly, cross-plane n-GeTe shows the largest mobility and power factor approaching 500 cm$^2$/V-s and 32 $μ$W/cm-K$^2$, respectively. The thermoelectric figure-of-merit, $zT$, is enhanced as a result of this unusual anisotropy in n-GeTe since the lattice thermal conductivity is minimized along cross-plane. This decouples the preferred transport directions of electrons and phonons, leading to a threefold increase in $zT$ along cross-plane compared to in-plane. The n-type anisotropy results from high-velocity electron states formed by Ge p-orbitals that span across the interstitial region. This surprising behavior, that would allow the preferential conduction direction to be controlled by do**, could be observed in other quasi-2D materials and exploited to achieve higher-performance thermoelectrics.
△ Less
Submitted 5 June, 2019; v1 submitted 12 April, 2019;
originally announced April 2019.
-
Phonon transport across a Si-Ge interface: the role of inelastic bulk scattering
Authors:
Jesse Maassen,
Vahid Askarpour
Abstract:
Understanding phonon transport across heterojunctions is important to achieve a wide range of thermal transport properties. Using the McKelvey-Shockley flux method with first-principles modeling, we theoretically investigate the phonon transport properties of a Si-Ge interface with a focus on the role of inelastic bulk phonon processes. We observe significant inelastic scattering near the interfac…
▽ More
Understanding phonon transport across heterojunctions is important to achieve a wide range of thermal transport properties. Using the McKelvey-Shockley flux method with first-principles modeling, we theoretically investigate the phonon transport properties of a Si-Ge interface with a focus on the role of inelastic bulk phonon processes. We observe significant inelastic scattering near the interface that redistributes the heat among the phonons as a result of non-equilibrium effects driven by the junction. These effects are most pronounced when the length of the junction is comparable to the average phonon mean-free-path. What controls these inelastic processes is elucidated.
△ Less
Submitted 17 December, 2018; v1 submitted 31 August, 2018;
originally announced August 2018.
-
On the Calculation of Lorenz Numbers for Complex Thermoelectric Materials
Authors:
Xufeng Wang,
Vahid Askarpour,
Jesse Maassen,
Mark Lundstrom
Abstract:
A first-principles informed approach to the calculation of Lorenz numbers for complex thermoelectric materials is presented and discussed. Example calculations illustrate the importance of using accurate band structures and energy-dependent scattering times. Results obtained by assuming that the scattering rate follows the density-of-states show that in the non-degenerate limit, Lorenz numbers bel…
▽ More
A first-principles informed approach to the calculation of Lorenz numbers for complex thermoelectric materials is presented and discussed. Example calculations illustrate the importance of using accurate band structures and energy-dependent scattering times. Results obtained by assuming that the scattering rate follows the density-of-states show that in the non-degenerate limit, Lorenz numbers below the commonly assumed lower limit of 2(kB/q)^2 can occur. The physical cause of low Lorenz numbers is explained by the shape of the transport distribution. The numerical and physical issues that need to be addressed in order to produce accurate calculations of the Lorenz number are identified. The results of this study provide a general method that should contribute to the interpretation of measurements of total thermal conductivity and to the search for materials with low Lorenz numbers, which may provide improved thermoelectric figures of merit, zT.
△ Less
Submitted 29 December, 2017; v1 submitted 10 October, 2017;
originally announced October 2017.
-
Thermoelectric Band Engineering: The Role of Carrier Scattering
Authors:
Evan Witkoske,
Xufeng Wang,
Vahid Askarpour,
Mark Lundstrom,
Jesse Maassen
Abstract:
Complex electronic band structures, with multiple valleys or bands at the same or similar energies can be beneficial for thermoelectric performance, but the advantages can be offset by inter-valley and inter-band scattering. In this paper, we demonstrate how first-principles band structures coupled with recently developed techniques for rigorous simulation of electron-phonon scattering provide the…
▽ More
Complex electronic band structures, with multiple valleys or bands at the same or similar energies can be beneficial for thermoelectric performance, but the advantages can be offset by inter-valley and inter-band scattering. In this paper, we demonstrate how first-principles band structures coupled with recently developed techniques for rigorous simulation of electron-phonon scattering provide the capabilities to realistically assess the benefits and trade-offs associated with these materials. We illustrate the approach using n-type silicon as a model material and show that intervalley scattering is strong. This example shows that the convergence of valleys and bands can improve thermoelectric performance, but the magnitude of the improvement depends sensitively on the relative strengths of intra- and inter-valley electron scattering. Because anisotropy of the band structure also plays an important role, a measure of the benefit of band anisotropy in the presence of strong intervalley scattering is presented.
△ Less
Submitted 4 October, 2017; v1 submitted 16 June, 2017;
originally announced June 2017.
