Showing 1–14 of 14 results for author: Ashton, T

A NECTAr-based upgrade for the Cherenkov cameras of the H.E.S.S. 12-meter telescopes

Authors: Terry Ashton, Michael Backes, Arnim Balzer, David Berge, Julien Bolmont, Simon Bonnefoy, Francois Brun, Thomas Chaminade, Eric Delagnes, Gerard Fontaine, Matthias Füßling, Gianluca Giavitto, Berrie Giebels, Jean-Francois Glicenstein, Tobias Gräber, Jim Hinton, Albert Jahnke, Stefan Klepser, Marko Kossatz, Axel Kretzschmann, Valentin Lefranc, Holger Leich, Jean-Philippe Lenain, Hartmut Lüdecke, Iryna Lypova , et al. (19 additional authors not shown)

Abstract: The High Energy Stereoscopic System (H.E.S.S.) is one of the three arrays of imaging atmospheric Cherenkov telescopes (IACTs) currently in operation. It is composed of four 12-meter telescopes and a 28-meter one, and is sensitive to gamma rays in the energy range ~30 GeV - 100 TeV. The cameras of the 12-m telescopes recently underwent a substantial upgrade, with the goal of improving their perform… ▽ More The High Energy Stereoscopic System (H.E.S.S.) is one of the three arrays of imaging atmospheric Cherenkov telescopes (IACTs) currently in operation. It is composed of four 12-meter telescopes and a 28-meter one, and is sensitive to gamma rays in the energy range ~30 GeV - 100 TeV. The cameras of the 12-m telescopes recently underwent a substantial upgrade, with the goal of improving their performance and robustness. The upgrade involved replacing all camera components except for the photomultiplier tubes (PMTs). This meant develo** new hardware for the trigger, readout, power, cooling and mechanical systems, and new software for camera control and data acquisition. Several novel technologies were employed in the cameras: the readout is built around the new NECTAr digitizer chip, developed for the next generation of IACTs; the camera electronics is fully controlled and read out via Ethernet using a combination of FPGA and embedded ARM computers; the software uses modern libraries such as Apache Thrift, ZMQ and Protocol buffers. This work describes in detail the design and the performance of the upgraded cameras. △ Less

Submitted 13 January, 2020; originally announced January 2020.

Comments: 35 pages, 14 figures, accepted for publication in "Astroparticle physics"

Performance of the upgraded H.E.S.S. cameras

Authors: S. Bonnefoy, T. Ashton, M. Backes, A. Balzer, D. Berge, F. Brun, T. Chaminade, E. Delagnes, G. Fontaine, M. Füßling, G. Giavitto, B. Giebels, J. F. Glicenstein, T. Gräber, J. A. Hinton, A. Jahnke, S. Klepser, M. Kossatz, A. Kretzschmann, V. Lefranc, H. Leich, J. P. Lenain, H. Lüdecke, I. Lypova, P. Manigot , et al. (15 additional authors not shown)

Abstract: The 14 years old cameras of the H.E.S.S. 12-m telescopes have been upgraded in 2015/2016, with the goals of reducing the system failure rate, reducing the dead time and improving the overall performance of the array. This conference contribution describes the various tests that were carried out on the cameras and their sub-components both in the lab and on site. It also gives an overview of the co… ▽ More The 14 years old cameras of the H.E.S.S. 12-m telescopes have been upgraded in 2015/2016, with the goals of reducing the system failure rate, reducing the dead time and improving the overall performance of the array. This conference contribution describes the various tests that were carried out on the cameras and their sub-components both in the lab and on site. It also gives an overview of the commissioning and calibration procedures adopted during and after the installation, including e.g. flat-fielding and trigger threshold scans. Finally, it reports in detail about the overall performance of the four new H.E.S.S. I cameras, using very recent data. △ Less

Submitted 15 August, 2017; originally announced August 2017.

Hardware and software architecture of the upgraded H.E.S.S. cameras

Authors: S. Klepser, T. Ashton, M. Backes, A. Balzer, D. Berge, S. Bonnefoy, F. Brun, T. Chaminade, E. Delagnes, G. Fontaine, M. Füßling, G. Giavitto, B. Giebels, J. F. Glicenstein, T. Gräber, J. A. Hinton, A. Jahnke, M. Kossatz, A. Kretzschmann, V. Lefranc, H. Leich, J. P. Lenain, H. Lüdecke, I. Lypova, P. Manigot , et al. (15 additional authors not shown)

Abstract: In 2015/16, the photomultiplier cameras of the H.E.S.S. Cherenkov telescopes CT1-4 have undergone a major upgrade. The entire electronics has been replaced, using NECTAr chips for the front-end readout. A new ventilation system has been installed and several auxiliary components have been replaced. Besides this, the internal control and readout software was rewritten from scratch in a modern and m… ▽ More In 2015/16, the photomultiplier cameras of the H.E.S.S. Cherenkov telescopes CT1-4 have undergone a major upgrade. The entire electronics has been replaced, using NECTAr chips for the front-end readout. A new ventilation system has been installed and several auxiliary components have been replaced. Besides this, the internal control and readout software was rewritten from scratch in a modern and modular way. Ethernet technology was used wherever possible to ensure both flexibility, stability and high bandwidth. An overview of the installed components will be given. △ Less

Submitted 14 July, 2017; originally announced July 2017.

The first GCT camera for the Cherenkov Telescope Array

Authors: A. De Franco, R. White, D. Allan, T. Armstrong, T. Ashton, A. Balzer, D. Berge, R. Bose, A. M. Brown, J. Buckley, P. M. Chadwick, P. Cooke, G. Cotter, M. K. Daniel, S. Funk, T. Greenshaw, J. Hinton, M. Kraus, J. La**ton, P. Molyneux, P. Moore, S. Nolan, A. Okumura, D. Ross, C. Rulten , et al. (10 additional authors not shown)

Abstract: The Gamma Cherenkov Telescope (GCT) is proposed to be part of the Small Size Telescope (SST) array of the Cherenkov Telescope Array (CTA). The GCT dual-mirror optical design allows the use of a compact camera of diameter roughly 0.4 m. The curved focal plane is equipped with 2048 pixels of ~0.2° angular size, resulting in a field of view of ~9°. The GCT camera is designed to record the flashes of… ▽ More The Gamma Cherenkov Telescope (GCT) is proposed to be part of the Small Size Telescope (SST) array of the Cherenkov Telescope Array (CTA). The GCT dual-mirror optical design allows the use of a compact camera of diameter roughly 0.4 m. The curved focal plane is equipped with 2048 pixels of ~0.2° angular size, resulting in a field of view of ~9°. The GCT camera is designed to record the flashes of Cherenkov light from electromagnetic cascades, which last only a few tens of nanoseconds. Modules based on custom ASICs provide the required fast electronics, facilitating sampling and digitisation as well as first level of triggering. The first GCT camera prototype is currently being commissioned in the UK. On-telescope tests are planned later this year. Here we give a detailed description of the camera prototype and present recent progress with testing and commissioning. △ Less

Submitted 4 September, 2015; originally announced September 2015.

Comments: In Proceedings of the 34th International Cosmic Ray Conference (ICRC2015), The Hague, The Netherlands. All CTA contributions at arXiv:1508.05894

A major electronics upgrade for the H.E.S.S. Cherenkov telescopes 1-4

Authors: G. Giavitto, T. Ashton, A. Balzer, D. Berge, F. Brun, T. Chaminade, E. Delagnes, G. Fontaine, M. Füßling, B. Giebels, J. F. Glicenstein, T. Gräber, J. A. Hinton, A. Jahnke, S. Klepser, M. Kossatz, A. Kretzschmann, V. Lefranc, H. Leich, H. Lüdecke, P. Manigot, V. Marandon, E. Moulin, M. de, P. Nayman , et al. (9 additional authors not shown)

Abstract: The High Energy Stereoscopic System (H.E.S.S.) is an array of imaging atmospheric Cherenkov telescopes (IACTs) located in the Khomas Highland in Namibia. It consists of four 12-m telescopes (CT1-4), which started operations in 2003, and a 28-m diameter one (CT5), which was brought online in 2012. It is the only IACT system featuring telescopes of different sizes, which provides sensitivity for gam… ▽ More The High Energy Stereoscopic System (H.E.S.S.) is an array of imaging atmospheric Cherenkov telescopes (IACTs) located in the Khomas Highland in Namibia. It consists of four 12-m telescopes (CT1-4), which started operations in 2003, and a 28-m diameter one (CT5), which was brought online in 2012. It is the only IACT system featuring telescopes of different sizes, which provides sensitivity for gamma rays across a very wide energy range, from ~30 GeV up to ~100 TeV. Since the camera electronics of CT1-4 are much older than the one of CT5, an upgrade is being carried out; first deployment was in 2015, full operation is planned for 2016. The goals of this upgrade are threefold: reducing the dead time of the cameras, improving the overall performance of the array and reducing the system failure rate related to aging. Upon completion, the upgrade will assure the continuous operation of H.E.S.S. at its full sensitivity until and possibly beyond the advent of CTA. In the design of the new components, several CTA concepts and technologies were used and are thus being evaluated in the field: The upgraded read-out electronics is based on the NECTAR readout chips; the new camera front- and back-end control subsystems are based on an FPGA and an embedded ARM computer; the communication between subsystems is based on standard Ethernet technologies. These hardware solutions offer good performance, robustness and flexibility. The design of the new cameras is reported here. △ Less

Submitted 3 September, 2015; originally announced September 2015.

Comments: Proceedings of the 34th International Cosmic Ray Conference, 30 July- 6 August, 2015, The Hague, The Netherlands

Representations of quantum conjugacy classes of orthosymplectic groups

Authors: Thomas Ashton, Andrey Mudrov

Abstract: Let $G$ be the complex symplectic or special orthogonal group and $\g$ its Lie algebra. With every point $x$ of the maximal torus $T\subset G$ we associate a highest weight module $M_x$ over the Drinfeld-Jimbo quantum group $U_q(\g)$ and a quantization of the conjugacy class of $x$ by operators in $\End(M_x)$. These quantizations are isomorphic for $x$ lying on the same orbit of the Weyl group, an… ▽ More Let $G$ be the complex symplectic or special orthogonal group and $\g$ its Lie algebra. With every point $x$ of the maximal torus $T\subset G$ we associate a highest weight module $M_x$ over the Drinfeld-Jimbo quantum group $U_q(\g)$ and a quantization of the conjugacy class of $x$ by operators in $\End(M_x)$. These quantizations are isomorphic for $x$ lying on the same orbit of the Weyl group, and $M_x$ support different representations of the same quantum conjugacy class. △ Less

Submitted 9 February, 2015; originally announced February 2015.

Comments: 19 pages, no figures

MSC Class: 81R50; 81R60; 17B37

R-matrix and Mickelsson algebras for orthosymplectic quantum groups

Authors: Thomas Ashton, Andrey Mudrov

Abstract: Let $\g$ be a complex orthogonal or symplectic Lie algebra and $\g'\subset \g$ the Lie subalgebra of rank $\rk \g'=\rk \g-1$ of the same type. We give an explicit construction of generators of the Mickelsson algebra $Z_q(\g,\g')$ in terms of Chevalley generators via the R-matrix of $U_q(\g)$. Let $\g$ be a complex orthogonal or symplectic Lie algebra and $\g'\subset \g$ the Lie subalgebra of rank $\rk \g'=\rk \g-1$ of the same type. We give an explicit construction of generators of the Mickelsson algebra $Z_q(\g,\g')$ in terms of Chevalley generators via the R-matrix of $U_q(\g)$. △ Less

Submitted 29 October, 2014; v1 submitted 23 October, 2014; originally announced October 2014.

Comments: 12 pages, no figures; a minor correction on p.7

Quantization of borderline Levi conjugacy classes of orthogonal groups

Authors: Thomas Ashton, Andrey Mudrov

Abstract: We construct equivariant quantization of a special family of Levi conjugacy classes of the complex orthogonal group $SO(N)$, whose stabilizer contains a Cartesian factor $SO(2)\times SO(P)$, $1\leqslant P<N$, $P\equiv N \mod 2$. We construct equivariant quantization of a special family of Levi conjugacy classes of the complex orthogonal group $SO(N)$, whose stabilizer contains a Cartesian factor $SO(2)\times SO(P)$, $1\leqslant P<N$, $P\equiv N \mod 2$. △ Less

Submitted 29 October, 2013; originally announced October 2013.

Comments: 23 pages, no figures

CTA contributions to the 33rd International Cosmic Ray Conference (ICRC2013)

Authors: The CTA Consortium, :, O. Abril, B. S. Acharya, M. Actis, G. Agnetta, J. A. Aguilar, F. Aharonian, M. Ajello, A. Akhperjanian, M. Alcubierre, J. Aleksic, R. Alfaro, E. Aliu, A. J. Allafort, D. Allan, I. Allekotte, R. Aloisio, E. Amato, G. Ambrosi, M. Ambrosio, J. Anderson, E. O. Angüner, L. A. Antonelli, V. Antonuccio , et al. (1082 additional authors not shown)

Abstract: Compilation of CTA contributions to the proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), which took place in 2-9 July, 2013, in Rio de Janeiro, Brazil Compilation of CTA contributions to the proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), which took place in 2-9 July, 2013, in Rio de Janeiro, Brazil △ Less

Submitted 29 July, 2013; v1 submitted 8 July, 2013; originally announced July 2013.

Comments: Index of CTA conference proceedings at the ICRC2013, Rio de Janeiro (Brazil). v1: placeholder with no arXiv links yet, to be replaced once individual contributions have been all submitted. v2: final with arXiv links to all CTA contributions and full author list

On representations of quantum conjugacy classes of GL(n)

Authors: Thomas Ashton, Andrey Mudrov

Abstract: Let $O$ be a closed Poisson conjugacy class of the complex algebraic Poisson group GL(n) relative to the Drinfeld-Jimbo factorizable classical r-matrix. Denote by $T$ the maximal torus of diagonal matrices in GL(n). With every $a\in O\cap T$ we associate a highest weight module $M_a$ over the quantum group $U_q(gl(n))$ and an equivariant quantization $C_{h,a}[O]$ of the polynomial ring $C[O]$ real… ▽ More Let $O$ be a closed Poisson conjugacy class of the complex algebraic Poisson group GL(n) relative to the Drinfeld-Jimbo factorizable classical r-matrix. Denote by $T$ the maximal torus of diagonal matrices in GL(n). With every $a\in O\cap T$ we associate a highest weight module $M_a$ over the quantum group $U_q(gl(n))$ and an equivariant quantization $C_{h,a}[O]$ of the polynomial ring $C[O]$ realized by operators on $M_a$. All quantizations $C_{h,a}[O]$ are isomorphic and can be regarded as different exact representations of the same algebra, $C_{h}[O]$. Similar results are obtained for semisimple adjoint orbits in $gl(n)$ equipped with the canonical GL(n)-invariant Poisson structure. △ Less

Submitted 26 April, 2013; originally announced April 2013.

Comments: 17 pages, no figures

MSC Class: 81R50; 81R60; 17B37

Knot Tightening By Constrained Gradient Descent

Authors: Ted Ashton, Jason Cantarella, Michael Piatek, Eric Rawdon

Abstract: We present new computations of approximately length-minimizing polygons with fixed thickness. These curves model the centerlines of "tight" knotted tubes with minimal length and fixed circular cross-section. Our curves approximately minimize the ropelength (or quotient of length and thickness) for polygons in their knot types. While previous authors have minimized ropelength for polygons using s… ▽ More We present new computations of approximately length-minimizing polygons with fixed thickness. These curves model the centerlines of "tight" knotted tubes with minimal length and fixed circular cross-section. Our curves approximately minimize the ropelength (or quotient of length and thickness) for polygons in their knot types. While previous authors have minimized ropelength for polygons using simulated annealing, the new idea in our code is to minimize length over the set of polygons of thickness at least one using a version of constrained gradient descent. We rewrite the problem in terms of minimizing the length of the polygon subject to an infinite family of differentiable constraint functions. We prove that the polyhedral cone of variations of a polygon of thickness one which do not decrease thickness to first order is finitely generated, and give an explicit set of generators. Using this cone we give a first-order minimization procedure and a Karush-Kuhn-Tucker criterion for polygonal ropelength criticality. Our main numerical contribution is a set of 379 almost-critical prime knots and links, covering all prime knots with no more than 10 crossings and all prime links with no more than 9 crossings. For links, these are the first published ropelength figures, and for knots they improve on existing figures. We give new maps of the self-contacts of these knots and links, and discover some highly symmetric tight knots with particularly simple looking self-contact maps. △ Less

Submitted 8 February, 2010; originally announced February 2010.

Comments: 45 pages, 16 figures, includes table of data with upper bounds on ropelength for all prime knots with no more than 10 crossings and all prime links with no more than 9 crossings

MSC Class: 53-04; 57M25

Exploring Continuous Tensegrities

Authors: Ted Ashton

Abstract: A discrete tensegrity framework can be thought of as a graph in Euclidean n-space where each edge is of one of three types: an edge with a fixed length (bar) or an edge with an upper (cable) or lower (strut) bound on its length. Roth and Whiteley, in their 1981 paper "Tensegrity Frameworks", showed that in certain cases, the struts and cables can be replaced with bars when analyzing the framewor… ▽ More A discrete tensegrity framework can be thought of as a graph in Euclidean n-space where each edge is of one of three types: an edge with a fixed length (bar) or an edge with an upper (cable) or lower (strut) bound on its length. Roth and Whiteley, in their 1981 paper "Tensegrity Frameworks", showed that in certain cases, the struts and cables can be replaced with bars when analyzing the framework for infinitesimal rigidity. In that case we call the tensegrity "bar equivalent". In specific, they showed that if there exists a set of positive weights, called a positive "stress", on the edges such that the weighted sum of the edge vectors is zero at every vertex, then the tensegrity is bar equivalent. In this paper we consider an extended version of the tensegrity framework in which the vertex set is a (possibly infinite) set of points in Euclidean n-space and the edgeset is a compact set of unordered pairs of vertices. These are called "continuous tensegrities". We show that if a continuous tensegrity has a strictly positive stress, it is bar equivalent and that it has a semipositive stress if and only if it is partially bar equivalent. We also show that if a tensegrity is minimally bar equivalent (it is bar equivalent but removing any open set of edges makes it no longer so), then it has a strictly positive stress. In particular, we examine the case where the vertices form a rectifiable curve and the possible motions of the curve are limited to local isometries of it. Our methods provide an attractive proof of the following result: There is no locally arclength preserving motion of a circle that increases any antipodal distance without decreasing some other one. △ Less

Submitted 14 May, 2007; v1 submitted 20 April, 2007; originally announced April 2007.

Comments: 165 pages, 65 figures, dissertation; replaced proof of Prop. 3.7.20

MSC Class: 53C24 (Primary) 52C25 (Secondary)

Self-contact Sets for 50 Tightly Knotted and Linked Tubes

Authors: Ted Ashton, Jason Cantarella, Michael Piatek, Eric Rawdon

Abstract: We report on new numerical computations of the set of self-contacts in tightly knotted tubes of uniform circular cross-section. Such contact sets have been obtained before for the trefoil and figure eight knots by simulated annealing -- we use constrained gradient-descent to provide new self-contact sets for those and 48 other knot and link types. The minimum length of all unit diameter tubes in… ▽ More We report on new numerical computations of the set of self-contacts in tightly knotted tubes of uniform circular cross-section. Such contact sets have been obtained before for the trefoil and figure eight knots by simulated annealing -- we use constrained gradient-descent to provide new self-contact sets for those and 48 other knot and link types. The minimum length of all unit diameter tubes in a given knot or link type is called the ropelength of that class of curves. Our computations yield improved upper bounds for the ropelength of all knots and links with 9 or fewer crossings except the trefoil. △ Less

Submitted 15 August, 2005; originally announced August 2005.

Comments: 26 pages, 53 figures, for higher-resolution images, see http://www.cs.washington.edu/homes/piatek/contact_table/

MSC Class: 53-04 (Primary) 65D18; 53A04 (Secondary)

A Fast Octree-Based Algorithm for Computing Ropelength

Authors: Ted Ashton, Jason Cantarella

Abstract: The ropelength of a space curve is usually defined as the quotient of its length by its thickness: the radius of the largest embedded tube around the knot. This idea was extended to space polygons by Eric Rawdon, who gave a definition of ropelength in terms of doubly-critical self-distances (local minima of the distance function on pairs of points on the polygon) and a function of the exterior a… ▽ More The ropelength of a space curve is usually defined as the quotient of its length by its thickness: the radius of the largest embedded tube around the knot. This idea was extended to space polygons by Eric Rawdon, who gave a definition of ropelength in terms of doubly-critical self-distances (local minima of the distance function on pairs of points on the polygon) and a function of the exterior angles of the polygon. A naive algorithm for finding the doubly-critical self-distances of an n-edge polygon involves comparing each pair of edges, and so takes O(n^2) time. In this paper, we describe an improved algorithm, based on the notion of octrees, which runs in O(n log n) time. The speed of the ropelength computation controls the performance of ropelength-minimizing programs such as Rawdon and Piatek's TOROS. An implementation of our algorithm is freely available under the GNU Public License. △ Less

Submitted 2 March, 2005; v1 submitted 21 September, 2004; originally announced September 2004.

Comments: 9 pages, 9 figures, post-refereeing version

MSC Class: 53-04; 65D17; 53A04