-
Ferrimagnetism induced by thermal vibrations in oxygen-deficient manganite heterostructures
Authors:
Moloud Kaviani,
Chiara Ricca,
Ulrich Aschauer
Abstract:
Super-exchange most often leads to antiferromagnetim in transition-metal perovskite oxides, yet ferromagnetism or ferrimagnetism would be preferred for many applications, for example in data storage. While alloying, epitaxial strain and defects were shown to lead to ferromagnetism, engineering this magnetic order remains a challenge. We propose, based on density functional theory calculations, a n…
▽ More
Super-exchange most often leads to antiferromagnetim in transition-metal perovskite oxides, yet ferromagnetism or ferrimagnetism would be preferred for many applications, for example in data storage. While alloying, epitaxial strain and defects were shown to lead to ferromagnetism, engineering this magnetic order remains a challenge. We propose, based on density functional theory calculations, a novel route to defect-engineer ferrimagnetism, which is based on preferential displacements of oxygen vacancies due to finite temperature vibrations. This mechanism has an unusual temperature dependence, as it is absent at 0K, strengthens with increasing temperature before vanishing once oxygen vacancies disorder, giving it a unique experimentally detectable signature.
△ Less
Submitted 7 May, 2024;
originally announced May 2024.
-
Gate-tunable topological superconductivity in a supramolecular electron spin lattice
Authors:
Rémy Pawlak,
Jung-Ching Liu,
Chao Li,
Richard Hess,
Hongyan Chen,
Carl Drechsel,
** Zhou,
Robert Häner,
Ulrich Aschauer,
Thilo Glatzel,
Silvio Decurtins,
Daniel Loss,
Jelena Klinovaja,
Shi-Xia Liu,
Wulf Wulfhekel,
Ernst Meyer
Abstract:
Topological superconductivity emerges in chains or arrays of magnetic atoms coupled to a superconductor. However, the external controllability of such systems with gate voltages is detrimental for their future implementation in a topological quantum computer. Here we showcase the supramolecular assembly of radical molecules on Pb(111), whose discharge is controlled by the tip of a scanning tunneli…
▽ More
Topological superconductivity emerges in chains or arrays of magnetic atoms coupled to a superconductor. However, the external controllability of such systems with gate voltages is detrimental for their future implementation in a topological quantum computer. Here we showcase the supramolecular assembly of radical molecules on Pb(111), whose discharge is controlled by the tip of a scanning tunneling microscope. Charged molecules carry a spin-1/2 state, as confirmed by observing Yu-Shiba-Rusinov in-gap states by tunneling spectroscopy at millikelvin temperature. Low energy modes are localized at island boundaries with a long decay towards the interior, whose spectral signature is consistent with Majorana zero modes protected by mirror symmetry. Our results open up a vast playground for the synthesis of gate-tunable organic topological superconductors.
△ Less
Submitted 22 December, 2023; v1 submitted 27 October, 2023;
originally announced October 2023.
-
Observation of Antiferroelectric Domain Walls in a Uniaxial Hyperferroelectric
Authors:
Michele Conroy,
Didrik René Småbråten,
Colin Ophus,
Konstantin Shapovalov,
Quentin M. Ramasse,
Kasper Aas Hunnestad,
Sverre M. Selbach,
Ulrich Aschauer,
Kalani Moore,
J. Marty Gregg,
Ursel Bangert,
Massimiliano Stengel,
Alexei Gruverman,
Dennis Meier
Abstract:
Ferroelectric domain walls are a rich source of emergent electronic properties and unusual polar order. Recent studies showed that the configuration of ferroelectric walls can go well beyond the conventional Ising-type structure. Néel-, Bloch-, and vortex-like polar patterns have been observed, displaying strong similarities with the spin textures at magnetic domain walls. Here, we report the disc…
▽ More
Ferroelectric domain walls are a rich source of emergent electronic properties and unusual polar order. Recent studies showed that the configuration of ferroelectric walls can go well beyond the conventional Ising-type structure. Néel-, Bloch-, and vortex-like polar patterns have been observed, displaying strong similarities with the spin textures at magnetic domain walls. Here, we report the discovery of antiferroelectric domain walls in the uniaxial ferroelectric Pb$_{5}$Ge$_{3}$O$_{11}$. We resolve highly mobile domain walls with an alternating displacement of Pb atoms, resulting in a cyclic 180$^{\circ}$ flip of dipole direction within the wall. Density functional theory calculations reveal that Pb$_{5}$Ge$_{3}$O$_{11}$ is hyperferroelectric, allowing the system to overcome the depolarization fields that usually suppress antiparallel ordering of dipoles along the longitudinal direction. Interestingly, the antiferroelectric walls observed under the electron beam are energetically more costly than basic head-to-head or tail-to-tail walls. The results suggest a new type of excited domain-wall state, expanding previous studies on ferroelectric domain walls into the realm of antiferroic phenomena.
△ Less
Submitted 5 September, 2023;
originally announced September 2023.
-
Combined theoretical and experimental study of the Moiré dislocation network at the SrTiO$_3$-(La,Sr)(Al,Ta)O$_3$ interface
Authors:
Chiara Ricca,
Elizabeth Skoropata,
Marta D. Rossell,
Rolf Erni,
Urs Staub,
Ulrich Aschauer
Abstract:
Recently a highly ordered Moiré dislocation lattice was identified at the interface between a \ce{SrTiO3} (STO) thin film and the (LaAlO$_3$)$_{0.3}$(Sr$_2$TaAlO$_6$)$_{0.7}$ (LSAT) substrate. A fundamental understanding of the local ionic and electronic structure around the dislocation cores is crucial to further engineer the properties of these complex multifunctional heterostructures. Here we c…
▽ More
Recently a highly ordered Moiré dislocation lattice was identified at the interface between a \ce{SrTiO3} (STO) thin film and the (LaAlO$_3$)$_{0.3}$(Sr$_2$TaAlO$_6$)$_{0.7}$ (LSAT) substrate. A fundamental understanding of the local ionic and electronic structure around the dislocation cores is crucial to further engineer the properties of these complex multifunctional heterostructures. Here we combine experimental characterization via analytical scanning transmission electron microscopy with results of molecular dynamics and density functional theory calculations to gain insights into the structure and defect chemistry of these dislocation arrays. Our results show that these dislocations lead to undercoordinated Ta/Al cations at the dislocation core, where oxygen vacancies can easily be formed, further facilitated by the presence of cation vacancies. The reduced Ti$^{3+}$ observed experimentally at the dislocations by electron energy-loss spectroscopy are a consequence of both the structure of the dislocation itself, as well as of the electron-do** due to oxygen vacancy formation. Finally, the experimentally observed Ti diffusion into LSAT around the dislocation core occurs only together with cation-vacancy formation in LSAT or Ta diffusion into STO.
△ Less
Submitted 24 July, 2023;
originally announced July 2023.
-
Conversion of La$_2$Ti$_2$O$_7$ to LaTiO$_2$N via Ammonolysis: An ab-initio Investigation
Authors:
Chiara Ricca,
Tristan Blandenier,
Valérie Werner,
Xing Wang,
Simone Pokrant,
Ulrich Aschauer
Abstract:
Perovskite oxynitrides are, due to their reduced band gap compared to oxides, promising materials for photocatalytic applications. They are most commonly synthesized from {110} layered Carpy-Galy (A$_2$B$_2$O$_7$}) perovskites via thermal ammonolysis, i.e. the exposure to a flow of ammonia at elevated temperature. The conversion of the layered oxide to the non-layered oxynitride must involve a com…
▽ More
Perovskite oxynitrides are, due to their reduced band gap compared to oxides, promising materials for photocatalytic applications. They are most commonly synthesized from {110} layered Carpy-Galy (A$_2$B$_2$O$_7$}) perovskites via thermal ammonolysis, i.e. the exposure to a flow of ammonia at elevated temperature. The conversion of the layered oxide to the non-layered oxynitride must involve a complex combination of nitrogen incorporation, oxygen removal and ultimately structural transition by elimination of the interlayer shear plane. Despite the process being commonly used, little is known about the microscopic mechanisms and hence factors that could ease the conversion. Here we aim to derive such insights via density functional theory calculations of the defect chemistry of the oxide and the oxynitride as well as the oxide's surface chemistry. Our results point to the crucial role of surface oxygen vacancies in forming clusters of NH$_3$ decomposition products and in incorporating N, most favorably substitutionally at the anion site. N then spontaneously diffuses away from the surface, more easily parallel to the surface and in interlayer regions, while diffusion perpendicular to the interlayer plane is somewhat slower. Once incorporation and diffusion lead to a local N concentration of about 70% of the stoichiometric oxynitride composition, the nitridated oxide spontaneously transforms to a nitrogen-deficient oxynitride.
△ Less
Submitted 2 May, 2023; v1 submitted 21 April, 2023;
originally announced April 2023.
-
Polygonal tessellations as predictive models of molecular monolayers
Authors:
Krisztina Regős,
Rémy Pawlak,
Xing Wang,
Ernst Meyer,
Silvio Decurtins,
Gábor Domokos,
Kostya S. Novoselov,
Shi-Xia Liu,
Ulrich Aschauer
Abstract:
Molecular self-assembly plays a very important role in various aspects of technology as well as in biological systems. Governed by the covalent, hydrogen or van der Waals interactions - self-assembly of alike molecules results in a large variety of complex patterns even in two dimensions (2D). Prediction of pattern formation for 2D molecular networks is extremely important, though very challenging…
▽ More
Molecular self-assembly plays a very important role in various aspects of technology as well as in biological systems. Governed by the covalent, hydrogen or van der Waals interactions - self-assembly of alike molecules results in a large variety of complex patterns even in two dimensions (2D). Prediction of pattern formation for 2D molecular networks is extremely important, though very challenging, and so far, relied on computationally involved approaches such as density functional theory, classical molecular dynamics, Monte Carlo, or machine learning. Such methods, however, do not guarantee that all possible patterns will be considered and often rely on intuition. Here we introduce a much simpler, though rigorous, hierarchical geometric model founded on the mean-field theory of 2D polygonal tessellations to predict extended network patterns based on molecular-level information. Based on graph theory, this approach yields pattern classification and pattern prediction within well-defined ranges. When applied to existing experimental data, our model provides an entirely new view of self-assembled molecular patterns, leading to interesting predictions on admissible patterns and potential additional phases. While developed for hydrogen-bonded systems, an extension to covalently bonded graphene-derived materials or 3D structures such as fullerenes is possible, significantly opening the range of potential future applications.
△ Less
Submitted 8 August, 2022;
originally announced August 2022.
-
Energy dissipation from confined states in nanoporous molecular networks
Authors:
Philipp D Astolfo,
Xing Wang,
Xunshan Liu,
Marcin Kisiel,
Carl Drechsel,
Alexis Baratoff,
Ulrich Aschauer,
Silvio Decurtins,
Shi-Xia Liu,
Remy Pawlak,
Ernst Meyer
Abstract:
Crystalline nanoporous molecular networks are assembled on the Ag(111) surface, where the pores confine electrons originating from the surface state of the metal. Depending on the pore sizes and their coupling, an antibonding level is shifted upwards by 0.1 to 0.3 eV as measured by scanning tunneling microscopy. On molecular sites, a down-shifted bonding state is observed, which is occupied under…
▽ More
Crystalline nanoporous molecular networks are assembled on the Ag(111) surface, where the pores confine electrons originating from the surface state of the metal. Depending on the pore sizes and their coupling, an antibonding level is shifted upwards by 0.1 to 0.3 eV as measured by scanning tunneling microscopy. On molecular sites, a down-shifted bonding state is observed, which is occupied under equilibrium conditions. Low-temperature force spectroscopy reveals energy dissipation peaks and jumps of frequency shifts at bias voltages, which are related to the confined states. The dissipation maps show delocalization on the supra-molecular assembly and a weak distance-dependence of the dissipation peaks. These observations indicate that two-dimensional arrays of coupled quantum dots are formed, which are quantitatively characterized by their quantum capacitances and resonant tunneling rates. Our work provides a method for studying the capacitive and dissipative response of quantum materials with nanomechanical oscillators.
△ Less
Submitted 5 September, 2022; v1 submitted 20 May, 2022;
originally announced May 2022.
-
Photochemical Anisotropy and Direction-dependent Optical Absorption in Semiconductors
Authors:
Chiara Ricca,
Ulrich Aschauer
Abstract:
Photochemical reactions on semiconductors are anisotropic, since they occur with different rates on surfaces of different orientation. Understanding the origin of this anisotropy is crucial to engineering more efficient photocatalysts. In this work, we use hybrid density functional theory (DFT) to identify the surfaces associated with the largest number of photo-generated carriers in different sem…
▽ More
Photochemical reactions on semiconductors are anisotropic, since they occur with different rates on surfaces of different orientation. Understanding the origin of this anisotropy is crucial to engineering more efficient photocatalysts. In this work, we use hybrid density functional theory (DFT) to identify the surfaces associated with the largest number of photo-generated carriers in different semiconductors. For each material we create a spherical heat map of the probability of optical transitions at different wave vectors. These maps allow to identify the directions associated with the majority of the photo-generated carriers and can thus be used to make predictions about the most reactive surfaces for photochemical applications. Results indicate that it is generally possible to correlate the heat maps with the anisotropy of the bands observed in conventional band-structure plots, as previously suggested. However, we also demonstrate that conventional bands-structure plots do not always provide all the informations and that taking into account the contribution of all possible transitions weighted by their transition dipole moments is crucial to obtain a complete picture.
△ Less
Submitted 2 February, 2022;
originally announced February 2022.
-
Proximity-Induced Superconductivity in Atomically Precise Nanographene
Authors:
Jung-Ching Liu,
Rémy Pawlak,
Xing Wang,
Philipp D'Astolfo,
Carl Drechsel,
** Zhou,
Silvio Decurtins,
Ulrich Aschauer,
Shi-Xia Liu,
Wulf Wulfhekel,
Ernst Meyer
Abstract:
Obtaining a robust superconducting state in atomically precise nanographene (NG) structures by proximity to a superconductor could foster the discovery of topological superconductivity in graphene. On-surface synthesis of such NGs has been achieved on noble metals or metal oxides, however, it is still absent on superconductors. Here, we present a synthetic method to induce superconductivity to pol…
▽ More
Obtaining a robust superconducting state in atomically precise nanographene (NG) structures by proximity to a superconductor could foster the discovery of topological superconductivity in graphene. On-surface synthesis of such NGs has been achieved on noble metals or metal oxides, however, it is still absent on superconductors. Here, we present a synthetic method to induce superconductivity to polymeric chains and NGs adsorbed on the superconducting Nb(110) substrate covered by thin Ag films. Using atomic force microscopy at low-temperature, we characterize the chemical structure of each sub-product formed on the superconducting Ag layer. Scanning tunneling spectroscopy further allows us to elucidate electronic properties of these nanostructures, which consistently show a superconducting gap. We foresee our approach to become a promising platform for exploring the interplay between carbon magnetism and superconductivity at the fundamental level.
△ Less
Submitted 1 February, 2022;
originally announced February 2022.
-
Interplay between polarization, strain and defect-pairs in Fe-doped SrMnO$_{3-δ}$
Authors:
Chiara Ricca,
Ulrich Aschauer
Abstract:
Defect chemistry, strain, and structural, magnetic and electronic degrees of freedom constitute a rich space for the design of functional properties in transition metal oxides. Here, we show that it is possible to engineer polarity and ferroelectricity in non-polar perovskite oxides via polar defect pairs formed by anion vacancies coupled to substitutional cations. We use a self-consistent site-de…
▽ More
Defect chemistry, strain, and structural, magnetic and electronic degrees of freedom constitute a rich space for the design of functional properties in transition metal oxides. Here, we show that it is possible to engineer polarity and ferroelectricity in non-polar perovskite oxides via polar defect pairs formed by anion vacancies coupled to substitutional cations. We use a self-consistent site-dependent DFT+$U$ approach that accounts for local structural and chemical changes upon defect creation and which is crucial to reconcile predictions with the available experimental data. Our results for Fe-doped oxygen-deficient SrMnO$_3$ show that substitutional Fe and oxygen vacancies can promote polarity due to an off-center displacement of the defect charge resulting in a net electric dipole moment, which polarizes the lattice in the defect neighborhood. The formation of these defects and the resulting polarization can be tuned by epitaxial strain, resulting in enhanced polarization also for strain values lower than the ones necessary to induce a polar phase transition in undoped SrMnO$_3$. For high enough defect concentrations, these defect dipoles couple in a parallel fashion, thus enabling defect- and strain-based engineering of ferroelectricity in SrMnO$_3$.
△ Less
Submitted 25 June, 2021;
originally announced June 2021.
-
Ferroelectricity promoted by cation/anion divacancies in SrMnO$_3$
Authors:
Chiara Ricca,
Danielle Berkowitz,
Ulrich Aschauer
Abstract:
We investigate the effect of polar Sr-O vacancy pairs on the electric polarization of SrMnO$_3$ (SMO) thin films using density functional theory (DFT) calculations. This is motivated by indications that ferroelectricity in complex oxides can be engineered by epitaxial strain but also \textit{via} the defect chemistry. Our results suggest that intrinsic do** by cation and anion divacancies can in…
▽ More
We investigate the effect of polar Sr-O vacancy pairs on the electric polarization of SrMnO$_3$ (SMO) thin films using density functional theory (DFT) calculations. This is motivated by indications that ferroelectricity in complex oxides can be engineered by epitaxial strain but also \textit{via} the defect chemistry. Our results suggest that intrinsic do** by cation and anion divacancies can induce a local polarization in unstrained non-polar SMO thin films and that a ferroelectric state can be stabilized below the critical strain of the stoichiometric material. This polarity is promoted by the electric dipole associated with the defect pair and its coupling to the atomic relaxations upon defect formation that polarize a region around the defect. This suggests that polar defect pairs affect the strain-dependent ferroelectricity in semiconducting antiferromagnetic SMO. For metallic ferromagnetic SMO we find a much weaker coupling between the defect dipole and the polarization due to much stronger electronic screening. Coupling of defect-pair dipoles at high enough concentrations along with their switchable orientation thus makes them a promising route to affect the ferroelectric transition in complex transition metal oxide thin films.
△ Less
Submitted 19 May, 2021;
originally announced May 2021.
-
Interactions of Tris with rutile surfaces and consequences for in vitro bioactivity testing
Authors:
Azade YazdanYar,
Léa Buswell,
Delphin Pantaloni,
Ulrich Aschauer,
Paul Bowen
Abstract:
Tris(hydroxymethyl)aminomethane (Tris) has been used as the buffer in bioactivity testing for over two decades and has become a standard choice for the scientific community. While it is believed to be non-interacting, the extent of its interactions with titanium oxide surfaces has not been systematically studied. Here, we use experimental (zeta potential measurements) and computational (molecular…
▽ More
Tris(hydroxymethyl)aminomethane (Tris) has been used as the buffer in bioactivity testing for over two decades and has become a standard choice for the scientific community. While it is believed to be non-interacting, the extent of its interactions with titanium oxide surfaces has not been systematically studied. Here, we use experimental (zeta potential measurements) and computational (molecular dynamics) approaches to evaluate the interaction of Tris with a rutile surface and how it affects the adsorption of other molecules relevant in biomedical in vitro testing. We show that the interaction of Tris with the rutile surface is strong and significantly affects the interaction of other organic residues with the surface. These strong interactions are compounded by the Tris concentration in the in vitro testing protocol which is much higher compared to other components. Our findings indicate that the kinetics observed in in vitro tests will be strongly influenced by the presence of Tris as a buffering agent when compared to the natural CO2 buffer in blood. These results reveal that considering the so-far neglected active role of Tris in in vitro testing is critically needed and that in vitro protocols using CO2 partial pressure as the buffering agent should yield more reliable results.
△ Less
Submitted 15 March, 2021;
originally announced March 2021.
-
Importance of surface oxygen vacancies for ultrafast hot carrier relaxation and transport in Cu$_2$O
Authors:
Chiara Ricca,
Lisa Grad,
Matthias Hengsberger,
Jürg Osterwalder,
Ulrich Aschauer
Abstract:
Cu$_2$O has appealing properties as an electrode for photo-electrochemical water splitting, yet its practical performance is severely limited by inefficient charge extraction at the interface. Using hybrid DFT calculations, we investigate carrier capture processes by oxygen vacancies (V$_\mathrm{O}$) in the experimentally observed ($\sqrt{3} \times \sqrt{3}$)R30$^{\circ}$ reconstruction of the dom…
▽ More
Cu$_2$O has appealing properties as an electrode for photo-electrochemical water splitting, yet its practical performance is severely limited by inefficient charge extraction at the interface. Using hybrid DFT calculations, we investigate carrier capture processes by oxygen vacancies (V$_\mathrm{O}$) in the experimentally observed ($\sqrt{3} \times \sqrt{3}$)R30$^{\circ}$ reconstruction of the dominant (111) surface. Our results show that these V$_\mathrm{O}$ are doubly ionized and that associated defects states strongly suppress electron transport. In particular, the excited electronic state of a singly charged V$_\mathrm{O}$ plays a crucial role in the non-radiative electron capture process with a capture coefficient of about 10$^{-9}$~cm$^3$/s and a lifetime of 0.04~ps, explaining the experimentally observed ultrafast carrier relaxation. These results highlight that engineering the surface V$_\mathrm{O}$ chemistry will be a crucial step in optimizing Cu$_2$O for photoelectrode applications.
△ Less
Submitted 8 March, 2021; v1 submitted 4 March, 2021;
originally announced March 2021.
-
Surface and interface effects in oxygen deficient SrMnO$_3$ thin films grown on SrTiO$_3$
Authors:
Moloud Kaviani,
Ulrich Aschauer
Abstract:
Complex oxide functionality, such as ferroelectricity, magnetism or superconductivity is often achieved in epitaxial thin-film geometries. Oxygen vacancies tend to be the dominant type of defect in these materials but a fundamental understanding of their stability and electronic structure has so far mostly been established in the bulk or strained bulk, neglecting interfaces and surfaces present in…
▽ More
Complex oxide functionality, such as ferroelectricity, magnetism or superconductivity is often achieved in epitaxial thin-film geometries. Oxygen vacancies tend to be the dominant type of defect in these materials but a fundamental understanding of their stability and electronic structure has so far mostly been established in the bulk or strained bulk, neglecting interfaces and surfaces present in a thin-film geometry. We investigate here, via density functional theory calculations, oxygen vacancies in the model system of a SrMnO$_3$ (SMO) thin film grown on a SrTiO$_3$ (STO) (001) substrate. Structural and electronic differences compared to bulk SMO result mainly from undercoordination at the film surface. The changed crystal field leads to a depletion of subsurface valence-band states and transfer of this charge to surface Mn atoms, both of which strongly affect the defect chemistry in the film. The result is a strong preference of oxygen vacancies in the surface region compared to deeper layers. Finally, for metastable oxygen vacancies in the substrate, we predict a spatial separation of the defect from its excess charge, the latter being accommodated in the film but close to the substrate boundary. These results show that surface and interface effects lead to significant differences in stability and electronic structure of oxygen vacancies in thin-film geometries compared to the (strained) bulk.
△ Less
Submitted 19 February, 2021;
originally announced February 2021.
-
Suitability of $β$-Mn$_2$V$_2$O$_7$/$β$-Cu$_2$V$_2$O$_7$ solid solutions for photocatalytic water-splitting
Authors:
Silviya Ninova,
Michal Strach,
Raffaella Buonsanti,
Ulrich Aschauer
Abstract:
The pyrovanadates $β$-Mn$_2$V$_2$O$_7$ and $β$-Cu$_2$V$_2$O$_7$ were previously investigated as photoanode materials for water splitting. Neither of them, however, was found to be sufficiently active. In this work we predict the properties of solid solutions of these two structurally similar pyrovanadates via density functional theory calculations to explore the suitability of their band structure…
▽ More
The pyrovanadates $β$-Mn$_2$V$_2$O$_7$ and $β$-Cu$_2$V$_2$O$_7$ were previously investigated as photoanode materials for water splitting. Neither of them, however, was found to be sufficiently active. In this work we predict the properties of solid solutions of these two structurally similar pyrovanadates via density functional theory calculations to explore the suitability of their band structure for water splitting and to assess their ease of synthesis. We predict that substitution of up to 20\% Cu or Mn into $β$-Mn$_2$V$_2$O$_7$ and $β$-Mn$_2$V$_2$O$_7$ respectively leads to a narrowing of the band gap, which in the former case is experimentally confirmed by UV-vis spectroscopy. Calculations for solid solutions in the intermediate composition range, however, yield nearly constant band gaps. Moreover, we predict solid-solutions with higher substitution levels to be increasingly difficult to synthesize, implying that solid solutions with low substitution levels are most relevant in terms of band gaps and ease of synthesis.
△ Less
Submitted 22 June, 2020;
originally announced June 2020.
-
Giant Grüneisen parameter in a strain-tuned superconducting quantum paraelectric: A consequence of the vanishing ferroelectric phonon energy
Authors:
Jacob Franklin,
Bochao Xu,
Donovan Davino,
Alexander V. Balatsky,
Ulrich Aschauer,
Ilya Sochnikov
Abstract:
Superconductivity and ferroelectricity are typically incompatible because the former needs free carriers, but the latter is usually suppressed by free carriers, unless their concentration is low. In the case of strontium titanate with low carrier concentration, unconventional superconductivity and ferroelectricity were shown to be correlated. Here, we report theoretically and experimentally evalua…
▽ More
Superconductivity and ferroelectricity are typically incompatible because the former needs free carriers, but the latter is usually suppressed by free carriers, unless their concentration is low. In the case of strontium titanate with low carrier concentration, unconventional superconductivity and ferroelectricity were shown to be correlated. Here, we report theoretically and experimentally evaluated Grüneisen parameters whose divergence under tensile stress indicates that the dominant phonon mode that enhances the superconducting order is the ferroelectric transverse soft-mode. This finding rules out all other phonon modes as the main contributors to the enhanced superconductivity in strained strontium titanate. This methodology shown here can be applied to many other quantum materials.
△ Less
Submitted 17 March, 2020;
originally announced March 2020.
-
Local polarization in oxygen-deficient LaMnO$_3$ induced by charge localization in the Jahn-Teller distorted structure
Authors:
Chiara Ricca,
Nicolas Niederhauser,
Ulrich Aschauer
Abstract:
The functional properties of transition metal perovskite oxides are known to result from a complex interplay of magnetism, polarization, strain, and stoichiometry. Here, we show that for materials with a cooperative Jahn-Teller distortion, such as LaMnO$_3$ (LMO), the orbital order can also couple to the defect chemistry and induce novel material properties. At low temperatures, LMO exhibits a str…
▽ More
The functional properties of transition metal perovskite oxides are known to result from a complex interplay of magnetism, polarization, strain, and stoichiometry. Here, we show that for materials with a cooperative Jahn-Teller distortion, such as LaMnO$_3$ (LMO), the orbital order can also couple to the defect chemistry and induce novel material properties. At low temperatures, LMO exhibits a strong Jahn-Teller distortion that splits the $e_g$ orbitals of the high-spin Mn$^{3+}$ ions and leads to alternating long, short, and intermediate Mn--O bonds. Our DFT+$U$ calculations show that, as a result of this orbital order, the charge localization in LMO upon oxygen vacancy formation differs from other manganites, like SrMnO$_3$, where the two extra electrons reduce the two Mn sites adjacent to the vacancy. In LMO, relaxations around the defect depend on which type of Mn--O bond is broken, affecting the $d$-orbital energies and leading to asymmetric and hence polar excess-electron localization with respect to the vacancy. Moreover, we show that the Mn--O bond lengths, orbital order and consequently the charge localization and polarity are tunable via strain.
△ Less
Submitted 23 February, 2020;
originally announced February 2020.
-
Self-consistent DFT+$U$+$V$ study of oxygen vacancies in SrTiO$_3$
Authors:
Chiara Ricca,
Iurii Timrov,
Matteo Cococcioni,
Nicola Marzari,
Ulrich Aschauer
Abstract:
Contradictory theoretical results for oxygen vacancies in SrTiO$_3$ (STO) were often related to the peculiar properties of STO, which is a $d^0$ transition metal oxide with mixed ionic-covalent bonding. Here, we apply, for the first time, density functional theory (DFT) within the extended Hubbard DFT+$U$+$V$ approach, including on-site as well as inter-site electronic interactions, to study oxyge…
▽ More
Contradictory theoretical results for oxygen vacancies in SrTiO$_3$ (STO) were often related to the peculiar properties of STO, which is a $d^0$ transition metal oxide with mixed ionic-covalent bonding. Here, we apply, for the first time, density functional theory (DFT) within the extended Hubbard DFT+$U$+$V$ approach, including on-site as well as inter-site electronic interactions, to study oxygen-deficient STO with Hubbard $U$ and $V$ parameters computed self-consistently via density-functional perturbation theory. Our results demonstrate that the extended Hubbard functional is a promising approach to study defects in materials with electronic properties similar to STO. Indeed, DFT+$U$+$V$ provides a better description of stoichiometric STO compared to standard DFT or DFT+$U$, the band gap and crystal field splitting being in good agreement with experiments. In turn, also the description of the electronic properties of oxygen vacancies in STO is improved, with formation energies in excellent agreement with experiments as well as results obtained with the most frequently used hybrid functionals, however at a fraction of the computational cost. While our results do not fully resolve the contradictory findings reported in literature, our systematic approach leads to a deeper understanding of their origin, which stems from different cell sizes, STO phases, the exchange-correlation functional, and the treatment of structural relaxations and spin-polarization.
△ Less
Submitted 23 January, 2020; v1 submitted 17 January, 2020;
originally announced January 2020.
-
Density functional theory study of the oxygen evolution activity on Sr$_2$TaO$_3$N surfaces
Authors:
Maria Bouri,
Ulrich Aschauer
Abstract:
Solar water splitting has attracted much attention as a clean and renewable route to produce hydrogen fuel. Since the oxygen evolution half-reaction (OER) requires high overpotentials, much research has focused on finding catalyst materials that minimize this energy loss. Oxynitrides with a layered perovskite structure have the potential to combine the superior photocatalytic properties of layered…
▽ More
Solar water splitting has attracted much attention as a clean and renewable route to produce hydrogen fuel. Since the oxygen evolution half-reaction (OER) requires high overpotentials, much research has focused on finding catalyst materials that minimize this energy loss. Oxynitrides with a layered perovskite structure have the potential to combine the superior photocatalytic properties of layered perovskite oxides with enhanced visible-light absorption caused by the band gap narrowing due to less electronegative nitrogen ions. In this paper, we study the OER on the (001) and (100) surfaces of the layered oxynitride Sr$_2$TaO$_3$N using density functional theory (DFT) calculations to obtain the OER free energy profiles and to determine the required overpotentials at various sites on each surface. We find that the reconstructed grooved (100) surface is most relevant for photocatalysis due to suitable band-edge positions combined with a low overpotential and good carrier mobility perpendicular to the surface.
△ Less
Submitted 31 May, 2019;
originally announced May 2019.
-
Nitrogen loss and oxygen evolution reaction activity of perovskite oxynitrides
Authors:
Hassan Ouhbi,
Ulrich Aschauer
Abstract:
Perovskite oxynitride photocatalysts were reported by experiment to evolve small amounts of N$_2$ due to the self-oxidation of nitrogen ions by photo-generated holes. The N$_2$ evolution rate was observed to decrease with increasing reaction time and was found to be correlated with a decrease in O$_2$ evolution (OER) activity, the origin of this latter effect however being unknown. Here we investi…
▽ More
Perovskite oxynitride photocatalysts were reported by experiment to evolve small amounts of N$_2$ due to the self-oxidation of nitrogen ions by photo-generated holes. The N$_2$ evolution rate was observed to decrease with increasing reaction time and was found to be correlated with a decrease in O$_2$ evolution (OER) activity, the origin of this latter effect however being unknown. Here we investigate, by means of density functional theory calculation, anion vacancies at the TaON-terminated (001) surface of the perovskite oxynitride SrTaO$_2$N. We find an energetic preference for oxygen and nitrogen vacancies to reside at the surface, where they are spontaneously healed by *O and *OH adsorbates under OER conditions. For nitrogen vacancies, this self-healing leads to an altered stoichiometry Ta$_4$O$_{8+x}$N$_{4-x}$ that is accompanied by electron do**. Substitution of N by O at the surface also leads to tensile strain, which confines the excess charge to the very surface layer, affecting the binding energy of reaction intermediates and significantly increasing the OER overpotential. This peculiar change in electronic structure thus provides an atomic scale explanation for the experimentally observed drop in OER activity of perovskite oxynitrides.
△ Less
Submitted 5 April, 2019;
originally announced April 2019.
-
Water oxidation catalysis on reconstructed NaTaO$_3$ (001) surfaces
Authors:
Hassan Ouhbi,
Ulrich Aschauer
Abstract:
Polar perovskite oxide surfaces are subject to structural reconstruction as a possible stabilisation mechanisms, which changes the surface structure and hence the surface chemistry. To investigate this effect, we study the oxygen evolution reaction (OER) on the reconstructed (001) surface of NaTaO$_3$, by means of density functional theory (DFT) calculations and compare it with the non-polar (113)…
▽ More
Polar perovskite oxide surfaces are subject to structural reconstruction as a possible stabilisation mechanisms, which changes the surface structure and hence the surface chemistry. To investigate this effect, we study the oxygen evolution reaction (OER) on the reconstructed (001) surface of NaTaO$_3$, by means of density functional theory (DFT) calculations and compare it with the non-polar (113) surface of the same material. For the clean surface the reconstruction has a beneficial effect on the catalytic activity, lowering the minimal overpotential from 0.88 V to 0.70 V while also changing the most active reaction site from Na to Ta. Under photocatalytic conditions, the Ta sites are covered by oxygen adsorbates, rendering a lattice oxygen site on the NaO terrace the most active with a very low overpotential of 0.32 V. An alternative surface reconstruction stable in contact with water leads to an oxygen coupling mechanism with an overpotential of 0.52 V. Our results show that terraced surface reconstructions enable novel reaction pathways with low overpotentials that do not exist on other non-polar NaTaO$_3$ surfaces nor on non-polar surfaces of chemically similar materials such as SrTaO$_2$N.
△ Less
Submitted 5 April, 2019;
originally announced April 2019.
-
Band-gap engineering in AB(O$_x$S$_{1-x}$)$_{3}$ perovskite oxysulfides: A route to strongly polar materials for photocatalytic water splitting
Authors:
Nathalie Vonrüti,
Ulrich Aschauer
Abstract:
Polar heterogeneous photocatalysts were shown to lead to enhanced charge-carrier separation that results in superior activity for example for photocatalytic water splitting. Promising photocatalyst materials such as oxynitrides can be rendered polar by epitaxial strain, which however also increases their band gap, making them unsuitable for visible light absorption. This suggests a trade-off betwe…
▽ More
Polar heterogeneous photocatalysts were shown to lead to enhanced charge-carrier separation that results in superior activity for example for photocatalytic water splitting. Promising photocatalyst materials such as oxynitrides can be rendered polar by epitaxial strain, which however also increases their band gap, making them unsuitable for visible light absorption. This suggests a trade-off between small band gaps and polar distortions - both being crucial for the catalyst's efficiency. In this paper we investigate, using density functional theory calculations, the suitability of strained AB(O$_x$S$_{1-x}$)$_{3}$ perovskites for photocatalytic water splitting. These materials normally have band gaps too small for water splitting but inducing polar distortions via epitaxial strain can increase the band gap to the suitable range. We find perovskite BaZr$_y$Ti$_{1-y}$O$_2$S compounds to be highly promising for photocatalytic water splitting due to large polar distortions and suitable band gaps.
△ Less
Submitted 26 February, 2019;
originally announced February 2019.
-
LaTiOxNy thin film model systems for photocatalytic water splitting: physicochemical evolution of the solid-liquid interface and the role of the crystallographic orientation
Authors:
Markus Pichler,
Wen** Si,
Fatima Haydous,
Helena Téllez,
John Druce,
Emiliana Fabbri,
Mario El Kazzi,
Max Döbeli,
Silviya Ninova,
Ulrich Aschauer,
Alexander Wokaun,
Daniele Pergolesi,
Thomas Lippert
Abstract:
The size of the band gap and the energy position of the band edges make several oxynitride semiconductors promising candidates for efficient hydrogen and oxygen production under solar light illumination. The intense research efforts dedicated to oxynitride materials have unveiled the majority of their most important properties. However, two crucial aspects have received much less attention. One is…
▽ More
The size of the band gap and the energy position of the band edges make several oxynitride semiconductors promising candidates for efficient hydrogen and oxygen production under solar light illumination. The intense research efforts dedicated to oxynitride materials have unveiled the majority of their most important properties. However, two crucial aspects have received much less attention. One is the critical issue of the compositional/structural surface modifications occurring during operation and how these affect the photoelectrochemical performance. The second concerns the relation between the electrochemical response and the crystallographic surface orientation of the oxynitride semiconductor. These are indeed topics of fundamental importance since it is exactly at the surface where the visible light-driven electrochemical reaction takes place. In contrast to conventional powder samples, thin films represent the best model system for these investigations. This study reviews current state-of-the-art of oxynitride thin film fabrication and characterization before focusing on LaTiO2N selected as representative photocatalyst. We report the investigation of the initial physicochemical evolution of the surface. Then we show that, after stabilization, the absorbed photon-to-current conversion efficiency of epitaxial thin films can differ by about 50% for different crystallographic surface orientations and be up to 5 times larger than for polycrystalline samples.
△ Less
Submitted 11 February, 2019;
originally announced February 2019.
-
Self-consistent site-dependent DFT+$U$ study of stoichiometric and defective SrMnO$_3$
Authors:
Chiara Ricca,
Iurii Timrov,
Matteo Cococcioni,
Nicola Marzari,
Ulrich Aschauer
Abstract:
We propose a self-consistent site-dependent Hubbard $U$ approach for DFT+$U$ calculations of defects in complex transition-metal oxides, using Hubbard parameters computed via linear-response theory. The formation of a defect locally perturbs the chemical environment of Hubbard sites in its vicinity, resulting in different Hubbard $U$ parameters for different sites. Using oxygen vacancies in SrMnO…
▽ More
We propose a self-consistent site-dependent Hubbard $U$ approach for DFT+$U$ calculations of defects in complex transition-metal oxides, using Hubbard parameters computed via linear-response theory. The formation of a defect locally perturbs the chemical environment of Hubbard sites in its vicinity, resulting in different Hubbard $U$ parameters for different sites. Using oxygen vacancies in SrMnO$_3$ as a model system, we investigate the dependence of $U$ on the chemical environment and study its influence on the structural, electronic, and magnetic properties of defective bulk and strained thin-film structures. Our results show that a self-consistent $U$ improves the description of stoichiometric bulk SrMnO$_3$ with respect to GGA or GGA+$U$ calculations using an empirical $U$. For defective systems, $U$ changes as a function of the distance of the Hubbard site from the defect, its oxidation state and the magnetic phase of the bulk structure. Taking into account this dependence, in turn, affects the computed defect formation energies and the predicted strain- and/or defect-induced magnetic phase transitions, especially when occupied localized states appear in the band gap of the material upon defect creation.
△ Less
Submitted 3 April, 2019; v1 submitted 27 November, 2018;
originally announced November 2018.
-
Anion-order driven polar interfaces at LaTiO$_2$N surfaces
Authors:
Silviya Ninova,
Ulrich Aschauer
Abstract:
Perovskite oxynitrides have recently attracted attention for their ability to photocatalytically split water. Compared to oxides the arrangement of anions in the material represents a further structural degree of freedom. The bulk oxynitride LaTiO$_2$N prefers a bonding-dominated \textit{cis} nitrogen arrangement, while we have previously shown that the (001) surface prefers a non-polar \textit{tr…
▽ More
Perovskite oxynitrides have recently attracted attention for their ability to photocatalytically split water. Compared to oxides the arrangement of anions in the material represents a further structural degree of freedom. The bulk oxynitride LaTiO$_2$N prefers a bonding-dominated \textit{cis} nitrogen arrangement, while we have previously shown that the (001) surface prefers a non-polar \textit{trans} order to compensate polarity. Here we consider, using density functional theory calculations, the polar/non-polar interface that would necessarily be present between the two anion orders. We show that the Ti-terminated surface will adopt up to two \textit{trans} ordered surface layers, which has a beneficial effect on the oxygen evolution efficiency. We then consider the hypothetical case of a polar \textit{cis} ordered surface layer atop a non-polar \textit{trans} bulk and show that similar electronic reconstructions as in the LaAlO$_3$/SrTiO$_3$ interface can be expected when interfaces between different anion orders are engineered in one and the same oxynitride material.
△ Less
Submitted 30 October, 2018;
originally announced October 2018.
-
Strain-induced heteronuclear charge disproportionation in EuMnO$_3$
Authors:
Ulrich Aschauer,
Nathalie Vonrüti,
Nicola A. Spaldin
Abstract:
Charge disproportionation transitions in complex oxides most commonly link high-temperature phases containing identical cations with the same oxidation state and crystallographic site, to low-temperature phases in which charge transfer between these ions results in unequal oxidation states. Here we propose, based on density functional calculations, a related concept that we term \textit{heteronucl…
▽ More
Charge disproportionation transitions in complex oxides most commonly link high-temperature phases containing identical cations with the same oxidation state and crystallographic site, to low-temperature phases in which charge transfer between these ions results in unequal oxidation states. Here we propose, based on density functional calculations, a related concept that we term \textit{heteronuclear} charge disproportionation, in which charge transfer occurs between different elements on different crystallographic sites. We show for the case of EuMnO$_3$ that such a transition from the experimentally observed Eu$^{3+}$Mn$^{3+}$O$_3$ phase to the so far unknown Eu$^{2+}$Mn$^{4+}$O$_3$ phase can be triggered by pressure and epitaxial strain. We then identify measurable signatures to aid in an experimental exploration of the complex pressure- and biaxial strain-dependent phase stability of EuMnO$_3$ that we hope to motivate with our predictions. We suggest other candidate crystal chemistries for heteronuclear charge disproportionation, in which novel physics could emerge from the coexistence of instabilities.
△ Less
Submitted 22 October, 2018;
originally announced October 2018.
-
The role of metastability in enhancing water-oxidation activity
Authors:
Nathalie Vonrüti,
Ulrich Aschauer
Abstract:
While metastability enhanced water-oxidation activity was experimentally reported, the reason behind this effect is still unclear. We determine here, using density functional theory calculations, oxygen evolution reaction overpotentials for a variety of defective (001) surfaces of three different perovskite materials. For all three, we find a large range of overpotentials for different reaction si…
▽ More
While metastability enhanced water-oxidation activity was experimentally reported, the reason behind this effect is still unclear. We determine here, using density functional theory calculations, oxygen evolution reaction overpotentials for a variety of defective (001) surfaces of three different perovskite materials. For all three, we find a large range of overpotentials for different reaction sites including also overpotentials at the top of the activity volcano. Assuming that these sites dominate the apparent catalytic activity, this implies that a large number of geometrically different reaction sites, as they occur when a catalyst is operated at the border of its stability conditions, can lead to a strong enhancement of the apparent activity. This also implies that a pre-treatment of the catalyst creating a variety of different reactive sites could lead to superior catalytic activities for thermodynamically stable materials.
△ Less
Submitted 27 August, 2019; v1 submitted 23 July, 2018;
originally announced July 2018.
-
Epitaxial Strain-Dependence of Band Gaps in Oxynitrides compared to Oxides
Authors:
Nathalie Vonrüti,
Ulrich Aschauer
Abstract:
Perovskite oxynitrides are a promising class of material for photocatalytic water-splitting due to their small band gaps and suitably aligned band edges. Recently, epitaxially strained oxynitrides started to attract interest due to the possibility to engineer the anion order and ferroelectric distortions. However, contrary to oxides there have been no studies on the band-gap evolution in oxynitrid…
▽ More
Perovskite oxynitrides are a promising class of material for photocatalytic water-splitting due to their small band gaps and suitably aligned band edges. Recently, epitaxially strained oxynitrides started to attract interest due to the possibility to engineer the anion order and ferroelectric distortions. However, contrary to oxides there have been no studies on the band-gap evolution in oxynitrides with epitaxial strain. Here, we investigate, using density functional theory calculations, the influence of epitaxial strain on the band gap of two different oxynitrides and compare our results with oxides. As opposed to cubic oxides, where both compressive and tensile strain narrow the band-gap, we find that the anion order leads to non-degenerate N \textit{2p} bands already at zero strain, which leads to opposite and anion order-dependent evolutions of the band gap under compressive and tensile strain. Further, we find that in oxynitrides polar distortions increase the band gap by up to 1 eV for 4% strain whereas for oxides the increase is only about 0.1 eV for the same amount of strain. The reason for this difference is the larger ionic radius of nitrogen leading to larger ferroelectric distortions and a stronger dependence of the band gap on the distortions amplitude. These results imply that ferroelectric distortions are strongly detrimental to light absorption and that their suppression, for example above a critical temperature, should result in a marked decrease in band gap and enhanced absorption of visible light.
△ Less
Submitted 6 June, 2018;
originally announced June 2018.
-
Water Oxidation Chemistry of Oxynitrides and Oxides: Comparing NaTaO$_3$ and SrTaO$_2$N
Authors:
Hassan Ouhbi,
Ulrich Aschauer
Abstract:
The oxygen evolution reaction (OER) plays an important role in evaluating a photocatalyst and to understand its surface chemistry. In this work we present a comparative study of the OER on the oxide NaTaO$_3$ (113) surface and the oxynitride SrTaO$_2$N (001) surface. Oxynitrides are highly promising photocatalysts due to their smaller band gap and resulting better visible light absorption compared…
▽ More
The oxygen evolution reaction (OER) plays an important role in evaluating a photocatalyst and to understand its surface chemistry. In this work we present a comparative study of the OER on the oxide NaTaO$_3$ (113) surface and the oxynitride SrTaO$_2$N (001) surface. Oxynitrides are highly promising photocatalysts due to their smaller band gap and resulting better visible light absorption compared to oxides but our knowledge about their surface structure and chemistry is still very limited. With the goal to compare the surface chemistry of oxides and oxynitrides, we perform density functional theory calculations to obtain the free energy changes associated with the OER reaction steps. For the OER at the Ta site of the clean surfaces, our results predict the rate-limiting step for both materials to be the formation of the *OOH intermediate, with a larger overpotential for the oxide than the oxynitride (1.30 V vs 1.01 V). The Na site is found to be more active than the Ta site on the oxide surface with an OER overpotential of 0.88 V, whereas the OER at the Sr site on the oxynitride has an overpotential of 1.14 V. For the A sites, contrary to the Ta site, the deprotonation of *OH was found to be the rate-limiting step. Computed Pourbaix diagrams show that at relevant (photo)electrochemical conditions all surfaces are covered with oxygen adsorbates. Oxygen adsorbates at A (Na, Sr) sites are however found to couple and desorb as O$_2$, leaving these sites empty under typical operating conditions. Following this desorption, we find the OER to proceed by the conventional *OOH mechanism on the SrO termination of the oxynitride but by a direct coupling of neighbouring *O at Na sites on the oxide surface. This coupling mechanism on the oxide has the smallest overpotential of 0.79 V compared to 0.88 V for the oxynitride, implying that the oxide is a better OER catalyst.
△ Less
Submitted 4 June, 2018;
originally announced June 2018.
-
Ultrafast relaxation dynamics of the antiferrodistortive phase in Ca doped SrTiO3
Authors:
M. Porer,
M. Fechner,
E. Bothschafter,
L. Rettig,
M. Savoini,
V. Esposito,
J. Rittmann,
M. Kubli,
M. J. Neugebauer,
E. Abreu,
T. Kubacka,
T. Huber,
G. Lantz,
S. Parchenko,
S. Grübel,
A. Paarmann,
J. Noack,
P. Beaud,
G. Ingold,
U. Aschauer,
S. L. Johnson,
U. Staub
Abstract:
The ultrafast dynamics of the octahedral rotation in Ca:SrTiO3 is studied by time resolved x-ray diffraction after photo excitation over the band gap. By monitoring the diffraction intensity of a superlattice reflection that is directly related to the structural order parameter of the soft-mode driven antiferrodistortive phase in Ca:SrTiO3, we observe a ultrafast relaxation on a 0.2 ps timescale o…
▽ More
The ultrafast dynamics of the octahedral rotation in Ca:SrTiO3 is studied by time resolved x-ray diffraction after photo excitation over the band gap. By monitoring the diffraction intensity of a superlattice reflection that is directly related to the structural order parameter of the soft-mode driven antiferrodistortive phase in Ca:SrTiO3, we observe a ultrafast relaxation on a 0.2 ps timescale of the rotation of the oxygen octahedron, which is found to be independent of the initial temperaure despite large changes in the corresponding soft-mode frequency. A further, much smaller reduction on a slower picosecond timescale is attributed to thermal effects. Time-dependent density-functional-theory calculations show that the fast response can be ascribed to an ultrafast displacive modification of the soft-mode potential towards the normal state, induced by holes created in the oxygen 2p states.
△ Less
Submitted 1 May, 2018;
originally announced May 2018.
-
Reaction of O2 with Subsurface Oxygen Vacancies on TiO2 Anatase (101)
Authors:
Martin Setvin,
Ulrich Aschauer,
Philipp Scheiber,
Ye-Fei Li,
Weiyi Hou,
Michael Schmid,
Annabella Selloni,
Ulrike Diebold
Abstract:
Oxygen (O2) adsorbed on metal oxides is important in catalytic oxidation reactions, chemical sensing, and photocatalysis. Strong adsorption requires transfer of negative charge from oxygen vacancies (VOs) or dopants, for example. With scanning tunneling microscopy, we observed, transformed, and, in conjunction with theory, identified the nature of O2 molecules on the (101) surface of anatase (tita…
▽ More
Oxygen (O2) adsorbed on metal oxides is important in catalytic oxidation reactions, chemical sensing, and photocatalysis. Strong adsorption requires transfer of negative charge from oxygen vacancies (VOs) or dopants, for example. With scanning tunneling microscopy, we observed, transformed, and, in conjunction with theory, identified the nature of O2 molecules on the (101) surface of anatase (titanium oxide, TiO2) doped with niobium. VOs reside exclusively in the bulk, but we pull them to the surface with a strongly negatively charged scanning tunneling microscope tip. O2 adsorbed as superoxo (O2)- at fivefold-coordinated Ti sites was transformed to peroxo (O2)2- and, via reaction with a VO, placed into an anion surface lattice site as an (O2)O species. This so-called bridging dimer also formed when O2 directly reacted with VOs at or below the surface.
△ Less
Submitted 13 April, 2018;
originally announced April 2018.
-
(Sub)surface mobility of oxygen vacancies at the TiO$_2$ anatase (101) surface
Authors:
Philipp Scheiber,
Martin Fidler,
Olga Dulub,
Michael Schmid,
Ulrike Diebold,
Weiyi Hou,
Ulrich Aschauer,
Annabella Selloni
Abstract:
Anatase is a metastable polymorph of TiO$_2$. In contrast to the more widely-studied TiO$_2$ rutile, O vacancies (V$_\mathrm O$'s) are not stable at the anatase (101) surface. Low-temperature STM shows that surface V$_\mathrm O$'s, created by electron bombardment at 105 K, start migrating to subsurface sites at temperatures $\geq$ 200 K. After an initial decrease of the V$_\mathrm O$ density, a te…
▽ More
Anatase is a metastable polymorph of TiO$_2$. In contrast to the more widely-studied TiO$_2$ rutile, O vacancies (V$_\mathrm O$'s) are not stable at the anatase (101) surface. Low-temperature STM shows that surface V$_\mathrm O$'s, created by electron bombardment at 105 K, start migrating to subsurface sites at temperatures $\geq$ 200 K. After an initial decrease of the V$_\mathrm O$ density, a temperature-dependent dynamic equilibrium is established where V$_\mathrm O$'s move to subsurface sites and back again, as seen in time-lapse STM images. We estimate that activation energies for subsurface migration lie between 0.6 and 1.2 eV; in comparison, DFT calculations predict a barrier of ca. 0.75 eV. The wide scatter of the experimental values might be attributed to inhomogeneously-distributed subsurface defects in the reduced sample.
△ Less
Submitted 12 April, 2018;
originally announced April 2018.
-
Bulk and surface properties of the Ruddlesden-Popper oxynitride Sr$_2$TaO$_3$N
Authors:
Maria Bouri,
Ulrich Aschauer
Abstract:
Oxynitrides with the perovskite structure are promising candidates for photocatalysis under visible light due to their appropriate optical and electronic properties. Recently, layered perovskites have attracted attention for their improved performance with respect to the bulk perovskites in photocatalytic water splitting. In this paper, we investigate the structural and electronic properties of th…
▽ More
Oxynitrides with the perovskite structure are promising candidates for photocatalysis under visible light due to their appropriate optical and electronic properties. Recently, layered perovskites have attracted attention for their improved performance with respect to the bulk perovskites in photocatalytic water splitting. In this paper, we investigate the structural and electronic properties of the layered Ruddlesden-Popper oxynitride Sr$_2$TaO$_3$N and its (001) surfaces using density functional theory (DFT) calculations. We find that the energetically favoured configuration of the bulk has an in-plane \textit{cis} anion order and exhibits rotations of the TaO$_6$ octahedra. Furthermore, we show that the TaON-terminated (001) surface suppresses exciton recombination due to higher-energy surface states, giving a potential explanation for the good photocatalytic performance.
△ Less
Submitted 20 October, 2017;
originally announced October 2017.
-
Anion order and spontaneous polarization in LaTiO\textsubscript{2}N oxynitride thin films
Authors:
Nathalie Vonrüti,
Ulrich Aschauer
Abstract:
The perovskite oxynitride LaTiO\textsubscript{2}N is a promising material for photocatalytic water splitting under visible light. One of the obstacles towards higher efficiencies of this and similar materials stems from charge-carrier recombination, which could be suppressed by the built-in electric field in polar materials. In this study, we investigate the spontaneous polarization in epitaxially…
▽ More
The perovskite oxynitride LaTiO\textsubscript{2}N is a promising material for photocatalytic water splitting under visible light. One of the obstacles towards higher efficiencies of this and similar materials stems from charge-carrier recombination, which could be suppressed by the built-in electric field in polar materials. In this study, we investigate the spontaneous polarization in epitaxially strained LaTiO\textsubscript{2}N thin films via density functional theory calculations. The effect of epitaxial strain on the anion order, resulting out-of-plane polarization, energy barriers for polarization reversal and the corresponding coercive fields are studied. We find that for compressive strains larger than 4\% the thermodynamically stable anion order is polar along the out-of-plane direction and has a coercive field comparable to other switchable ferroelectrics. Our results show that strained LaTiO\textsubscript{2}N could indeed suppress carrier recombination and lead to enhanced photocatalytic activities.
△ Less
Submitted 30 September, 2017;
originally announced October 2017.
-
Coupling and competition between ferroelectricity, magnetism, strain and oxygen vacancies in AMnO3 perovskites
Authors:
Astrid Marthinsen,
Carina Faber,
Ulrich Aschauer,
Nicola A. Spaldin,
Sverre M. Selbach
Abstract:
We use first-principles calculations based on density functional theory to investigate the interplay between oxygen vacancies, A-site cation size / tolerance factor, epitaxial strain, ferroelectricity and magnetism in the perovskite manganite series, AMnO3 (A=Ca2+, Sr2+, Ba2+). We find that, as expected, increasing the volume through either chemical pressure or tensile strain generally lowers the…
▽ More
We use first-principles calculations based on density functional theory to investigate the interplay between oxygen vacancies, A-site cation size / tolerance factor, epitaxial strain, ferroelectricity and magnetism in the perovskite manganite series, AMnO3 (A=Ca2+, Sr2+, Ba2+). We find that, as expected, increasing the volume through either chemical pressure or tensile strain generally lowers the formation energy of neutral oxygen vacancies consistent with their established tendency to expand the lattice. Increased volume also favors polar distortions, both because competing rotations of the oxygen octahedra are suppressed and because coulomb repulsion associated with cation off-centering is reduced. Interestingly, the presence of ferroelectric polarization favors ferromagnetic over antiferromagnetic ordering due to suppressed antiferromagnetic superexchange as the polar distortion bends the Mn-O-Mn bond angles away from the optimal 180deg. Intriguingly, we find that polar distortions compete with the formation of oxygen vacancies, which have a higher formation energy in the polar phases; conversely the presence of oxygen vacancies suppresses the onset of polarization. In contrast, oxygen vacancy formation energies are lower for ferromagnetic than antiferromagnetic orderings of the same structure type. Our findings suggest a rich and complex phase diagram, in which defect chemistry, polarization, structure and magnetism can be modified using chemical potential, strain, and electric or magnetic fields.
△ Less
Submitted 16 June, 2016;
originally announced June 2016.
-
Interplay between strain, defect charge state and functionality in complex oxides
Authors:
Ulrich Aschauer,
Nicola A. Spaldin
Abstract:
We use first-principles calculations to investigate the interplay between strain and the charge state of point defect impurities in complex oxides. Our work is motivated by recent interest in using defects as active elements to provide novel functionality in coherent epitaxial films. Using oxygen vacancies as model point defects, and CaMnO$_3$ and MnO as model materials, we calculate the changes i…
▽ More
We use first-principles calculations to investigate the interplay between strain and the charge state of point defect impurities in complex oxides. Our work is motivated by recent interest in using defects as active elements to provide novel functionality in coherent epitaxial films. Using oxygen vacancies as model point defects, and CaMnO$_3$ and MnO as model materials, we calculate the changes in internal strain caused by changing the charge state of the vacancies, and conversely the effect of strain on charge-state stability. Our results show that the charge state is a degree of freedom that can be used to control the interaction of defects with strain and hence the concentration and location of defects in epitaxial films. We propose the use of field-effect gating to reversibly change the charge state of defects and hence the internal strain and corresponding strain-induced functionalities.
△ Less
Submitted 9 May, 2016;
originally announced May 2016.
-
Strain-induced structural instability in FeRh
Authors:
Ulrich Aschauer,
Roisin Braddell,
Sonia A. Brechbühl,
Peter M. Derlet,
Nicola A. Spaldin
Abstract:
We perform density functional calculations to investigate the structure of the inter-metallic alloy FeRh under epitaxial strain. Bulk FeRh exhibits a metamagnetic transition from a low-temperature antiferromagnetic (AFM) phase to a ferromagnetic (FM) phase at 350K, and its strain dependence is of interest for tuning the transition temperature to the room-temperature operating conditions of typical…
▽ More
We perform density functional calculations to investigate the structure of the inter-metallic alloy FeRh under epitaxial strain. Bulk FeRh exhibits a metamagnetic transition from a low-temperature antiferromagnetic (AFM) phase to a ferromagnetic (FM) phase at 350K, and its strain dependence is of interest for tuning the transition temperature to the room-temperature operating conditions of typical memory devices. We find an unusually strong dependence of the structural energetics on the choice of exchange-correlation functional, with the usual local density approximation (LDA) yielding the wrong ground-state structure, and generalized gradient (GGA) extensions being in better agreement with the bulk experimental structure. Using the GGA we show the existence of a metastable face-centered-cubic (fcc)-like AFM structure that is reached from the ground state body-centered-cubic (bcc) AFM structure by following the epitaxial Bain path. We predict that this metastable fcc-like structure has a significantly higher conductivity than the bcc AFM phase. We show that the behavior is well described using non-linear elasticity theory, which captures the softening and eventual sign change of the orthorhombic shear modulus under compressive strain, consistent with this structural instability. Finally, we predict the existence of an additional unit-cell-doubling lattice instability, which should be observable at low temperature.
△ Less
Submitted 6 March, 2016;
originally announced March 2016.
-
Quantum critical origin of the superconducting dome in SrTiO$_3$
Authors:
Jonathan M. Edge,
Yaron Kedem,
Ulrich Aschauer,
Nicola A. Spaldin,
Alexander V. Balatsky
Abstract:
We investigate the origin of superconductivity in doped SrTiO$_3$ (STO) using a combination of density functional and strong coupling theories within the framework of quantum criticality. Our density functional calculations of the ferroelectric soft mode frequency as a function of do** reveal a crossover from quantum paraelectric to ferroelectric behavior at a do** level coincident with the ex…
▽ More
We investigate the origin of superconductivity in doped SrTiO$_3$ (STO) using a combination of density functional and strong coupling theories within the framework of quantum criticality. Our density functional calculations of the ferroelectric soft mode frequency as a function of do** reveal a crossover from quantum paraelectric to ferroelectric behavior at a do** level coincident with the experimentally observed top of the superconducting dome. Based on this finding, we explore a model in which the superconductivity in STO is enabled by its proximity to the ferroelectric quantum critical point and the soft mode fluctuations provide the pairing interaction on introduction of carriers. Within our model, the low do** limit of the superconducting dome is explained by the emergence of the Fermi surface, and the high do** limit by departure from the quantum critical regime. We predict that the highest critical temperature will increase and shift to lower carrier do** with increasing $^{18}$O isotope substitution, a scenario that is experimentally verifiable.
△ Less
Submitted 29 July, 2015;
originally announced July 2015.
-
Polaronic metal state at the LaAlO3/SrTiO3 interface
Authors:
C. Cancellieri,
A. S. Mishchenko,
U. Aschauer,
A. Filippetti,
C. Faber,
O. S. Barisic,
V. A. Rogalev,
T. Schmitt,
N. Nagaosa,
V. N. Strocov
Abstract:
Interplay of spin, charge, orbital and lattice degrees of freedom in oxide heterostructures results in a plethora of fascinating properties, which can be exploited in new generations of electronic devices with enhanced functionalities. The paradigm example is the interface between the two band insulators LaAlO3 and SrTiO3 (LAO/STO) that hosts two-dimensional electron system (2DES). Apart from the…
▽ More
Interplay of spin, charge, orbital and lattice degrees of freedom in oxide heterostructures results in a plethora of fascinating properties, which can be exploited in new generations of electronic devices with enhanced functionalities. The paradigm example is the interface between the two band insulators LaAlO3 and SrTiO3 (LAO/STO) that hosts two-dimensional electron system (2DES). Apart from the mobile charge carriers, this system exhibits a range of intriguing properties such as field effect, superconductivity and ferromagnetism, whose fundamental origins are still debated. Here, we use soft-X-ray angle-resolved photoelectron spectroscopy to penetrate through the LAO overlayer and access charge carriers at the buried interface. The experimental spectral function directly identifies the interface charge carriers as large polarons, emerging from coupling of charge and lattice degrees of freedom, and involving two phonons of different energy and thermal activity. This phenomenon fundamentally limits the carrier mobility and explains its puzzling drop at high temperatures.
△ Less
Submitted 16 October, 2015; v1 submitted 16 July, 2015;
originally announced July 2015.
-
Effect of epitaxial strain on cation and anion vacancy formation in MnO
Authors:
Ulrich Aschauer,
Nathalie Vonrüti,
Nicola A. Spaldin
Abstract:
Biaxial strain in coherent epitaxial thin films can have a pronounced effect on the point defect profile in the film material. Detailed fundamental knowledge of the interaction of strain with point defects is crucial in understanding the stoichiometry and resulting properties of strained thin films. Here we investigate the effect of biaxial strain on the formation energy of cation and anion vacanc…
▽ More
Biaxial strain in coherent epitaxial thin films can have a pronounced effect on the point defect profile in the film material. Detailed fundamental knowledge of the interaction of strain with point defects is crucial in understanding the stoichiometry and resulting properties of strained thin films. Here we investigate the effect of biaxial strain on the formation energy of cation and anion vacancies using MnO as a model system. Our density functional theory calculations show that, as expected from local volume arguments, compressive strain favours the formation of cation vacancies. Interestingly, we find that small compressive and tensile strains lead to ordering of the resulting holes along the in-plane and normal direction respectively, which should manifest in different anisotropic properties in the two strain states.
△ Less
Submitted 2 June, 2015;
originally announced June 2015.
-
Competition and cooperation between antiferrodistortive and ferroelectric instabilities in SrTiO$_3$
Authors:
Ulrich Aschauer,
Nicola A. Spaldin
Abstract:
We use density functional theory to explore the interplay between octahedral rotations and ferroelectricity in the model compound SrTiO$_3$. We find that over the experimentally relevant range octahedral rotations suppress ferroelectricity as is generally assumed in the literature. Somewhat surprisingly we observe that at larger angles the previously weakened ferroelectric instability strengthens…
▽ More
We use density functional theory to explore the interplay between octahedral rotations and ferroelectricity in the model compound SrTiO$_3$. We find that over the experimentally relevant range octahedral rotations suppress ferroelectricity as is generally assumed in the literature. Somewhat surprisingly we observe that at larger angles the previously weakened ferroelectric instability strengthens significantly. By analysing geometry changes, energetics, force constants and charges, we explain the mechanisms behind this transition from competition to cooperation with increasing octahedral rotation angle.
△ Less
Submitted 23 October, 2013;
originally announced October 2013.
-
Strain controlled oxygen vacancy formation and ordering in CaMnO$_3$
Authors:
Ulrich Aschauer,
Reto Pfenninger,
Sverre M. Selbach,
Tor Grande,
Nicola A. Spaldin
Abstract:
We use first-principles calculations to investigate the stability of bi-axially strained \textit{Pnma} perovskite CaMnO$_3$ towards the formation of oxygen vacancies. Our motivation is provided by promising indications that novel material properties can be engineered by application of strain through coherent heteroepitaxy in thin films. While it is usually assumed that such epitaxial strain is acc…
▽ More
We use first-principles calculations to investigate the stability of bi-axially strained \textit{Pnma} perovskite CaMnO$_3$ towards the formation of oxygen vacancies. Our motivation is provided by promising indications that novel material properties can be engineered by application of strain through coherent heteroepitaxy in thin films. While it is usually assumed that such epitaxial strain is accommodated primarily by changes in intrinsic lattice constants, point defect formation is also a likely strain relaxation mechanism. This is particularly true at the large strain magnitudes ($>$4%) which first-principles calculations often suggest are required to induce new functionalities. We find a strong dependence of oxygen vacancy defect formation energy on strain, with tensile strain lowering the formation energy consistent with the increasing molar volume with increasing oxygen deficiency. In addition, we find that strain differentiates the formation energy for different lattice sites, suggesting its use as a route to engineering vacancy ordering in epitaxial thin films.
△ Less
Submitted 19 March, 2013;
originally announced March 2013.