Showing 1–23 of 23 results for author: Artusio-Glimpse, A

Increased instantaneous bandwidth of Rydberg atom electrometry with an optical frequency comb probe

Authors: Alexandra B. Artusio-Glimpse, David A. Long, Sean M. Bresler, Nikunjkumar Prajapati, Dangka Shylla, Andrew P. Rotunno, Matthew T. Simons, Samuel Berweger, Noah Schlossberger, Thomas W. LeBrun, Christopher L. Holloway

Abstract: We show that the use of an optical frequency comb probe leads to dramatically improved bandwidth (as high as 12+/-1 MHz) for the detection of modulated radio frequencies in Rydberg atom-based electrometry. We show that the use of an optical frequency comb probe leads to dramatically improved bandwidth (as high as 12+/-1 MHz) for the detection of modulated radio frequencies in Rydberg atom-based electrometry. △ Less

Submitted 27 February, 2024; originally announced February 2024.

Independent Rydberg Atom Sensing using a Dual-Ladder Scheme

Authors: Samuel Berweger, Alexandra B. Artusio-Glimpse, Nikunjkumar Prajapati, Andrew P. Rotunno, Noah Schlossberger, Dangka Shylla, Kaitlin R. Moore, Matthew T. Simons, Christopher L. Holloway

Abstract: Rydberg atom-based electric field sensing can provide all-optical readout of radio frequency fields in a dielectric environment. However, because a single set of optical fields is typically used to prepare the Rydberg state and read out its response to RF fields, it is challenging to perform simultaneous and independent measurements of the RF field(s). Here we show that using two independent schem… ▽ More Rydberg atom-based electric field sensing can provide all-optical readout of radio frequency fields in a dielectric environment. However, because a single set of optical fields is typically used to prepare the Rydberg state and read out its response to RF fields, it is challenging to perform simultaneous and independent measurements of the RF field(s). Here we show that using two independent schemes to prepare and read out the same Rydberg state can be used to perform independent measurements in general, which we demonstrate specifically by resolving the the RF polarization. We expect this work will be useful for fiber-coupled sensor heads where spatial multiplexing is challenging, as well as for complex multi-level sensing schemes. △ Less

Submitted 26 February, 2024; originally announced February 2024.

Investigation of fluorescence versus transmission readout for three-photon Rydberg excitation used in electrometry

Authors: Nikunjkumar Prajapati, Samuel Berweger, Andrew P. Rotunno, Alexandra B. Artusio-Glimpse, Noah Schlossberger, Dangka Shylla, William J. Watterson, Matthew T. Simons, David LaMantia, Eric B. Norrgard, Stephen P. Eckel, Christopher L. Holloway

Abstract: We present a three-photon based fluorescence readout method where the strength of the fluorescence scales with the strength of the radio-frequency (RF) field being applied. We compare this method to conventional three-photon electromagnetically-induced transparency (EIT) and electromagnetically-induced absorption (EIA). Our demonstrated EIA/EIT sensitivity in the collinear three-photon Cesium syst… ▽ More We present a three-photon based fluorescence readout method where the strength of the fluorescence scales with the strength of the radio-frequency (RF) field being applied. We compare this method to conventional three-photon electromagnetically-induced transparency (EIT) and electromagnetically-induced absorption (EIA). Our demonstrated EIA/EIT sensitivity in the collinear three-photon Cesium system is the best reported to date at roughly 30 uVm^{-1}Hz^{-1/2}. The fluorescence is nearly 4 fold better in sensitivity compared to EIA/EIT readout. △ Less

Submitted 1 February, 2024; originally announced February 2024.

Comments: 9 figure, quantum optics, rydberg electrometry

Zeeman-resolved Autler-Townes splitting in Rydberg atoms with tunable resonances and a single transition dipole moment

Authors: Noah Schlossberger, Andrew P. Rotunno, Aly Artusio-Glimpse, Nikunjkumar Prajapati, Samuel Berweger, Dangka Shylla, Matthew T. Simons, Christopher L. Holloway

Abstract: Applying a magnetic field as a method for tuning the frequency of Autler-Townes splitting for Rydberg electrometry has recently been demonstrated. In this paper we provide a theoretical understanding of EIT signals in the presence of a large magnetic field, as well as demonstrate some advantages of this technique over traditional Autler-Townes based electrometry. We show that a strong magnetic fie… ▽ More Applying a magnetic field as a method for tuning the frequency of Autler-Townes splitting for Rydberg electrometry has recently been demonstrated. In this paper we provide a theoretical understanding of EIT signals in the presence of a large magnetic field, as well as demonstrate some advantages of this technique over traditional Autler-Townes based electrometry. We show that a strong magnetic field provides a well-defined quantization axis regardless of the optical field polarizations, we demonstrate that by separating the $m_J$ levels of the Rydberg state we can perform an Autler-Townes splitting with a single participating dipole moment, and we demonstrate recovery of signal strength by populating a single $m_J$ level using circularly polarized light. △ Less

Submitted 27 November, 2023; v1 submitted 13 November, 2023; originally announced November 2023.

High angular momentum coupling for enhanced Rydberg-atom sensing in the VHF band

Authors: Nikunjkumar Prajapati, Jakob W. Kunzler, Alexandra B. Artusio-Glimpse, Andrew Rotunno, Samuel Berweger, Matthew T. Simons, Christopher L. Holloway, Chad M. Gardner, Michael S. Mcbeth, Robert A. Younts

Abstract: Recent advances in Rydberg atom electrometry detail promising applications in radio frequency (RF) communications. Presently, most applications use carrier frequencies greater than 1~GHz where resonant Autler-Townes splitting provides the highest sensitivity. This letter documents a series of experiments with Rydberg atomic sensors to collect and process waveforms from the automated identification… ▽ More Recent advances in Rydberg atom electrometry detail promising applications in radio frequency (RF) communications. Presently, most applications use carrier frequencies greater than 1~GHz where resonant Autler-Townes splitting provides the highest sensitivity. This letter documents a series of experiments with Rydberg atomic sensors to collect and process waveforms from the automated identification system (AIS) used in maritime navigation in the Very High Frequency (VHF) band. Detection in this band is difficult with conventional resonant Autler-Townes based Rydberg sensing and requires a new approach. We show the results from a new method called High Angular Momentum Matching Excited Raman (HAMMER), which enhances low frequency detection and exhibits superior sensitivity compared to the traditional AC Stark effect. From measurements of electromagnetically induced transparency (EIT) in rubidium and cesium vapor cells, we show the relationship between incident electric field strength and observed signal-to-noise ratio and find that the sensitivity of the HAMMER scheme in rubidium achieved an equivalent single VHF tone sensitivity of $\mathrm{100~μV/m/\sqrt{Hz}}$. With these results, we estimate the usable range of the atomic vapor cell antenna for AIS waveforms given current technology and detection techniques. △ Less

Submitted 3 October, 2023; originally announced October 2023.

Comments: 9 figure, 8 pages

EIT spectra of Rydberg atoms dressed with dual-tone radio-frequency fields

Authors: Maitreyi Jayaseelan, Andrew P. Rotunno, Nikunjkumar Prajapati, Samuel Berweger, Alexandra B. Artusio-Glimpse, Matthew T. Simons, Christopher L. Holloway

Abstract: We examine spectral signatures of Rydberg atoms driven with near-resonant dual-tone radio-frequency (RF) fields in the regime of strong driving. We experimentally demonstrate and theoretically model a variety of nonlinear and multiphoton phenomena in the atomic Rydberg response that manifest in the EIT spectra. Our results echo previous studies of two-level atoms driven with bichromatic optical fi… ▽ More We examine spectral signatures of Rydberg atoms driven with near-resonant dual-tone radio-frequency (RF) fields in the regime of strong driving. We experimentally demonstrate and theoretically model a variety of nonlinear and multiphoton phenomena in the atomic Rydberg response that manifest in the EIT spectra. Our results echo previous studies of two-level atoms driven with bichromatic optical fields. In comparison to the optical studies, the RF-driven Rydberg system utilizes a more complex excitation pathway, and electromagnetic fields from two different spectral regimes: a two-photon optical excitation continuously creates highly excited Rydberg atoms, while RF fields drive resonant coupling between the Rydberg levels and generate strong mixing. Yet, our spectra reflect nearly identical effects of the dual-tone RF fields on the atomic Rydberg observables, showing detuning-dependent splittings and Rabi frequency dependent peak numbers and relative strengths, and avoided crossings at subharmonic resonances. We thus validate previous two-state models in this more complex physical system. In the context of Rydberg electrometry, we use these investigations to explore a technique where we tune a known RF field to observe spectra which give frequency and power of an unknown RF field using the complex dual-tone spectra. △ Less

Submitted 16 May, 2023; originally announced May 2023.

Inverse Transform Sampling for Efficient Doppler-Averaged Spectroscopy Simulations

Authors: Andrew P. Rotunno, Amy K. Robinson, Nikunjkumar Prajapati, Samuel Berweger, Matthew T. Simons, Alexandra B. Artusio-Glimpse, Christopher L. Holloway

Abstract: We present a thermal velocity sampling method for calculating Doppler-broadened atomic spectra, which more efficiently reaches a smooth limit than regular velocity weighted sampling. The method uses equal-population sampling of the 1-D thermal distribution, sampling the 'inverse transform' of the cumulative distribution function, and is broadly applicable to normal distributions. We also discuss e… ▽ More We present a thermal velocity sampling method for calculating Doppler-broadened atomic spectra, which more efficiently reaches a smooth limit than regular velocity weighted sampling. The method uses equal-population sampling of the 1-D thermal distribution, sampling the 'inverse transform' of the cumulative distribution function, and is broadly applicable to normal distributions. We also discuss efficiencies from eliminating velocity classes which don't significantly contribute to observed atomic lines, and comment on the application of this method in 2- and 3-dimensions. △ Less

Submitted 24 April, 2023; originally announced April 2023.

Comments: 8 pages, 7 figures. Code and data will be available with final publication

Journal ref: AIP Advances 13, 075218 (2023)

Phase Retrieval for Rydberg Quantum Arrays

Authors: Peter Vouras, Kumar Vijay Mishra, Alexandra Artusio-Glimpse

Abstract: Rydberg-aided atomic electrometry using alkali-metal atoms is gaining increased research interest for detecting external electric fields. However, the inability of Rydberg probes to detect phase is a serious impediment to their realistic deployment. In this paper, we derive a novel phase retrieval algorithm for use in a phased array or synthetic aperture applications where only measurements of ele… ▽ More Rydberg-aided atomic electrometry using alkali-metal atoms is gaining increased research interest for detecting external electric fields. However, the inability of Rydberg probes to detect phase is a serious impediment to their realistic deployment. In this paper, we derive a novel phase retrieval algorithm for use in a phased array or synthetic aperture applications where only measurements of electric field intensity are possible at each spatial sample. These array configurations exist if a Rydberg atom probe is used in place of an antenna. We employ three-stage alternating projections to solve the resulting optimization problem. Our numerical experiments demonstrate the effectiveness of the proposed algorithm in terms of beamformed array output. △ Less

Submitted 5 February, 2023; originally announced February 2023.

Detection of HF and VHF Fields through Floquet Sideband Gaps by `Rabi Matching' Dressed Rydberg Atoms

Authors: Andrew P. Rotunno, Samuel Berweger, Nikunjkumar Prajapati, Matthew T. Simons, Alexandra B. Artusio-Glimpse, Christopher L. Holloway, Maitreyi Jayaseelan, Robert M. Potvliege, C. S. Adams

Abstract: Radio frequencies in the HF and VHF (3 MHz to 300 MHz) bands are challenging for Rydberg atom-based detection schemes, as resonant detection requires exciting the atoms to extremely high energy states. We demonstrate a method for detecting and measuring radio frequency (RF) carriers in the HF and VHF bands via a controlled Autler-Townes line splitting. Using a resonant, high-frequency (GHz) RF fie… ▽ More Radio frequencies in the HF and VHF (3 MHz to 300 MHz) bands are challenging for Rydberg atom-based detection schemes, as resonant detection requires exciting the atoms to extremely high energy states. We demonstrate a method for detecting and measuring radio frequency (RF) carriers in the HF and VHF bands via a controlled Autler-Townes line splitting. Using a resonant, high-frequency (GHz) RF field, the absorption signal from Townes-Merrit sidebands created by a low frequency, non-resonant RF field can be enhanced. Notably, this technique uses a measurement of the optical frequency separation of an avoided crossing to determine the amplitude of a non-resonant, low frequency RF field. This technique also provides frequency-selective measurements of low frequency RF electric fields. To show this, we demonstrate amplitude modulated signal transduction on a low frequency VHF carrier. We further demonstrate reception of multiple tones simultaneously, creating a Rydberg `spectrum analyzer' over the VHF range. △ Less

Submitted 21 April, 2023; v1 submitted 6 December, 2022; originally announced December 2022.

Comments: Data for figures can be found at: https://datapub.nist.gov/od/id/mds2-2852

Journal ref: J. Appl. Phys. 134, 134501 (2023)

Phase-Resolved Rydberg Atom Field Sensing using Quantum Interferometry

Authors: Samuel Berweger, Alexandra B. Artusio-Glimpse, Andrew P. Rotunno, Nikunjkumar Prajapati, Joseph D. Christesen, Kaitlin R. Moore, Matthew T. Simons, Christopher L. Holloway

Abstract: Although Rydberg atom-based electric field sensing provides key advantages over traditional antenna-based detection, it remains limited by the need for a local oscillator (LO) for low-field and phase resolved detection. In this work, we demonstrate that closed-loop quantum interferometric schemes can be used to generate a system-internal reference that can directly replace an external LO for Rydbe… ▽ More Although Rydberg atom-based electric field sensing provides key advantages over traditional antenna-based detection, it remains limited by the need for a local oscillator (LO) for low-field and phase resolved detection. In this work, we demonstrate that closed-loop quantum interferometric schemes can be used to generate a system-internal reference that can directly replace an external LO for Rydberg field sensing. We reveal that this quantum-interferometrically defined internal reference phase and frequency can be used analogously to a traditional LO for atom-based down-mixing to an intermediate frequency for lock-in phase detection. We demonstrate that this LO-equivalent functionality provides analogous benefits to an LO, including full 360$^\circ$ phase resolution as well as improved sensitivity. The general applicability of this approach is confirmed by demodulating a four phase-state signal broadcast on the atoms. Our approach opens up new sensing schemes and provides a clear path towards all-optical Rydberg atom sensing implementations. △ Less

Submitted 28 July, 2023; v1 submitted 30 November, 2022; originally announced December 2022.

Sensitivity Comparison of Two-photon vs Three-photon Rydberg Electrometry

Authors: Nikunjkumar Prajapati, Narayan Bhusal, Andrew P. Rotunno, Samuel Berweger, Matthew T. Simons, Alexandra B. Artusio-Glimpse, Ying Ju Wang, Eric Bottomley, Haoquan Fan, Christopher L. Holloway

Abstract: We investigate the sensitivity of three-photon EIT in Rydberg atoms to radio frequency detection and compare it against conventional two-photon systems. Specifically, we model the 4-level and 5-level atomic system and compare how the transmission of the probe changes with different powers of the lasers used and strengths of the RF field. In this model, we also define a sensitivity metric to best r… ▽ More We investigate the sensitivity of three-photon EIT in Rydberg atoms to radio frequency detection and compare it against conventional two-photon systems. Specifically, we model the 4-level and 5-level atomic system and compare how the transmission of the probe changes with different powers of the lasers used and strengths of the RF field. In this model, we also define a sensitivity metric to best relate to the operation of the current best experimental implementation based on shot noise limited detection. We find that the three-photon system boasts much narrower line widths compared to the conventional two-photon EIT. However, these narrow line features do not align with the regions of the best sensitivity. In addition to this, we calculate the expected sensitivity for the two-photon Rydberg sensor and find that the best achievable sensitivity is over an order of magnitude better than the current measured values of 5 uV/m/Hz. However, by accounting for the additional noise sources in the experiment and the quantum efficiency of the photo-detectors, the values are in good agreement. △ Less

Submitted 23 November, 2022; v1 submitted 21 November, 2022; originally announced November 2022.

Comments: 9 pages, 6 figures

Rydberg state engineering: A comparison of tuning schemes for continuous frequency sensing

Authors: Samuel Berweger, Nikunjkumar Prajapati, Alexandra B. Artusio-Glimpse, Andrew P. Rotunno, Roger Brown, Christopher L. Holloway, Matthew T. Simons, Eric Imhof, Steven R. Jefferts, Baran N. Kayim, Michael A. Viray, Robert Wyllie, Brian C. Sawyer, Thad G. Walker

Abstract: On-resonance Rydberg atom-based radio-frequency (RF) electric field sensing methods remain limited by the narrow frequency signal detection bands available by resonant transitions. The use of an additional RF tuner field to dress or shift a target Rydberg state can be used to return a detuned signal field to resonance and thus dramatically extend the frequency range available for resonant sensing.… ▽ More On-resonance Rydberg atom-based radio-frequency (RF) electric field sensing methods remain limited by the narrow frequency signal detection bands available by resonant transitions. The use of an additional RF tuner field to dress or shift a target Rydberg state can be used to return a detuned signal field to resonance and thus dramatically extend the frequency range available for resonant sensing. Here we investigate three distinct tuning level schemes based on adjacent Rydberg transitions, which are shown to have distinct characteristics and can be controlled with mechanisms based on the tuning field frequency or field strength. We further show that a two-photon Raman feature can be used as an effective tuning mechanism separate from conventional Autler-Townes splitting. We compare our tuning schemes to AC Stark effect-based broadband RF field sensing and show that although the sensitivity is diminished as we tune away from a resonant state, it nevertheless can be used in configurations where there is a low density of Rydberg states, which would result in a weak AC Stark effect. △ Less

Submitted 28 September, 2022; originally announced September 2022.

Modeling Line Broadening and Distortion Due to Spatially Non-Uniform Fields in Rydberg Electrometry

Authors: Andrew P. Rotunno, Amy K. Robinson, Samuel Berweger, Nukunjkumar Prajapati, Alexandra B. Artusio-Glimpse, Matthew Simons, Christopher L. Holloway

Abstract: We present a model for calculating broadened Autler-Townes spectra when probing ac electric field magnitudes by use of Rydberg atom electromagnetically-induced transparency. This model approximates the atom vapor as a multi-layered media and uses Beer's law to combine probe beam absorption through many discrete thin segments, replicating the broadening seen in experimental measurements. The method… ▽ More We present a model for calculating broadened Autler-Townes spectra when probing ac electric field magnitudes by use of Rydberg atom electromagnetically-induced transparency. This model approximates the atom vapor as a multi-layered media and uses Beer's law to combine probe beam absorption through many discrete thin segments, replicating the broadening seen in experimental measurements. The methodology can be easily applied to other non-uniform optical parameters when monitoring total spectral transmission or phase delay. Field non-uniformity is present in standing waves of unmatched waveguides and glass vapor cells, which are generally due to source characteristics and environmental reflections. We present broadening and distortion effects caused by various types of electric-field distributions, and compare this model to results obtained from measured atomic spectra. △ Less

Submitted 15 August, 2022; originally announced August 2022.

Comments: 8 pages, 6 figures

Journal ref: J. Appl. Phys. 134, 084401 (2023)

An Overview of Advances in Signal Processing Techniques for Classical and Quantum Wideband Synthetic Apertures

Authors: Peter Vouras, Kumar Vijay Mishra, Alexandra Artusio-Glimpse, Samuel Pinilla, Angeliki Xenaki, David W. Griffith, Karen Egiazarian

Abstract: Rapid developments in synthetic aperture (SA) systems, which generate a larger aperture with greater angular resolution than is inherently possible from the physical dimensions of a single sensor alone, are leading to novel research avenues in several signal processing applications. The SAs may either use a mechanical positioner to move an antenna through space or deploy a distributed network of s… ▽ More Rapid developments in synthetic aperture (SA) systems, which generate a larger aperture with greater angular resolution than is inherently possible from the physical dimensions of a single sensor alone, are leading to novel research avenues in several signal processing applications. The SAs may either use a mechanical positioner to move an antenna through space or deploy a distributed network of sensors. With the advent of new hardware technologies, the SAs tend to be denser nowadays. The recent opening of higher frequency bands has led to wide SA bandwidths. In general, new techniques and setups are required to harness the potential of wide SAs in space and bandwidth. Herein, we provide a brief overview of emerging signal processing trends in such spatially and spectrally wideband SA systems. This guide is intended to aid newcomers in navigating the most critical issues in SA analysis and further supports the development of new theories in the field. In particular, we cover the theoretical framework and practical underpinnings of wideband SA radar, channel sounding, sonar, radiometry, and optical applications. Apart from the classical SA applications, we also discuss the quantum electric-field-sensing probes in SAs that are currently undergoing active research but remain at nascent stages of development. △ Less

Submitted 19 March, 2023; v1 submitted 11 May, 2022; originally announced May 2022.

Comments: 48 pages, 65 figures, 3 tables

TV and Video Game Streaming with a Quantum Receiver: A Study on a Rydberg atom-based receivers bandwidth and reception clarity

Authors: Nikunjkumar Prajapati, Andrew Rotunno, Samuel Berweger, Matt Simons, Aly Artusio-Glimpse, Christopher L. Holloway

Abstract: We demonstrate the ability to receive live color analog television and video game signals with the use of the Rydberg atom receiver. The typical signal expected for traditional 480i NSTC format video signals requires a bandwidth of over 3 MHz. We determine the beam sizes, powers, and detection method required for the Rydberg atoms to receive this type of signal. The beam size affects the average t… ▽ More We demonstrate the ability to receive live color analog television and video game signals with the use of the Rydberg atom receiver. The typical signal expected for traditional 480i NSTC format video signals requires a bandwidth of over 3 MHz. We determine the beam sizes, powers, and detection method required for the Rydberg atoms to receive this type of signal. The beam size affects the average time the atoms remain in the interaction volume, which is inversely proportional to the bandwidth of the receiver. We find that small beam diameters (less than 100 μm) lead to much faster responses and allow for color reception. We demonstrate the effect of beam size on bandwidth by receiving a live 480i video stream with the Rydberg atom receiver. The best fidelity was achieved with a beam width of 85 μm full-width at half-max. △ Less

Submitted 11 May, 2022; v1 submitted 5 May, 2022; originally announced May 2022.

Comments: 6 pages, 7 figures

Rydberg atom-based field sensing enhancement using a split-ring resonator

Authors: Christopher L. Holloway, Nikunjkumar Prajapati, Alexandra B. Artusio-Glimpse, Samuel Berweger, Yoshiaki Kasahara, Andrea Alu, Richard W. Ziolkowski

Abstract: We investigate the use of a split-ring resonator (SRR) incorporated with an atomic-vapor cell to improve the sensitivity and the minimal detectable electric (E) field of Rydberg atom-based sensors. In this approach, a sub-wavelength SRR is placed around an atomic vapor-cell filled with cesium atoms for E-field measurements at 1.3~GHz. The SRR provides a factor of 100 in the enhancement of the E-fi… ▽ More We investigate the use of a split-ring resonator (SRR) incorporated with an atomic-vapor cell to improve the sensitivity and the minimal detectable electric (E) field of Rydberg atom-based sensors. In this approach, a sub-wavelength SRR is placed around an atomic vapor-cell filled with cesium atoms for E-field measurements at 1.3~GHz. The SRR provides a factor of 100 in the enhancement of the E-field measurement sensitivity. Using electromagnetically induced transparency (EIT) with Aulter-Townes splitting, E-field measurements down to 5~mV/m are demonstrated with the SRR, while in the absence of the SRR, the minimal detectable field is 500~mV/m. We demonstrate that by combining EIT with a heterodyne Rydberg atom-based mixer approach, the SRR allows for the a sensitivity of 5.5~$μ$V/m$\sqrt{\rm Hz}$, which is two-orders of magnitude improvement in sensitivity than when the SRR is not used. △ Less

Submitted 17 February, 2022; originally announced February 2022.

Comments: 5 pages, 6 figures

Electromagnetically induced transparency based Rydberg-atom sensor for quantum voltage measurements

Authors: Christopher L. Holloway, Nikunjkumar Prajapati, John Kitching, Jeffery A. Sherman, Carson Teale, Alain Rufenacht, Alexandra B. Artusio-Glimpse, Matthew T. Simons, Amy K. Robinson, Eric B. Norrgard

Abstract: We investigate the Stark shift in Rydberg rubidium atoms through electromagnetically induced transparency for the measurement of direct current (dc) and 60~Hz alternating current (ac) voltages. This technique has direct applications to atom-based measurements of dc and ac voltage and the calibration of voltage instrumentation. We present experimental results for different atomic states that allow… ▽ More We investigate the Stark shift in Rydberg rubidium atoms through electromagnetically induced transparency for the measurement of direct current (dc) and 60~Hz alternating current (ac) voltages. This technique has direct applications to atom-based measurements of dc and ac voltage and the calibration of voltage instrumentation. We present experimental results for different atomic states that allow for dc and ac voltage measurements ranging from 0~V to 12~V. A Rydberg atom-based voltage standard could become an alternative calibration method with more favorable size, weight, power consumption, and cost compared to the more precise Josephson voltage standard. In this study, we also demonstrate how the voltage measurements can be utilized to determine the atomic polarizability for the Rydberg states. The Rydberg atom-based voltage measurement technology would become a complimentary method for dissemination of the voltage scale directly to the end user. △ Less

Submitted 22 October, 2021; v1 submitted 5 October, 2021; originally announced October 2021.

Comments: 13 pages, 14 figures, 3 tables

Enhancement of electromagnetically induced transparency based Rydberg-atom electrometry through population repum**

Authors: Nikunjkumar Prajapati, Amy K. Robinson, Samuel Berweger, Matthew T. Simons, Alexandra B. Artusio-Glimpse, Christopher L. Holloway

Abstract: We demonstrate improved sensitivity of Rydberg electrometry based on electromagnetically induced transparency (EIT) with a ground state repum** laser. Though there are many factors that limit the sensitivity of radio frequency field measurements, we show that repum** can enhance the interaction strength while avoiding additional Doppler or power broadening. Through this method, we nearly doubl… ▽ More We demonstrate improved sensitivity of Rydberg electrometry based on electromagnetically induced transparency (EIT) with a ground state repum** laser. Though there are many factors that limit the sensitivity of radio frequency field measurements, we show that repum** can enhance the interaction strength while avoiding additional Doppler or power broadening. Through this method, we nearly double the EIT amplitude without an increase in the width of the peak. A similar increase in amplitude without the repum** field is not possible through simple optimization.We also establish that one of the key limits to detection is the photon shot noise of the probe laser. We show an improvement on the sensitivity of the device by a factor of nearly 2 in the presence of the repump field. △ Less

Submitted 30 August, 2021; originally announced August 2021.

Comments: 5 pages, 6 figures

Continuous radio frequency electric-field detection through adjacent Rydberg resonance tuning

Authors: Matthew T. Simons, Alexandra B. Artusio-Glimpse, Christopher L. Holloway, Eric Imhof, Steven R. Jefferts, Robert Wyllie, Brian C. Sawyer, Thad G Walker

Abstract: We demonstrate the use of multiple atomic-level Rydberg-atom schemes for continuous frequency detection of radio frequency (RF) fields. Resonant detection of RF fields by electromagnetically-induced transparency and Autler-Townes (AT) in Rydberg atoms is typically limited to frequencies within the narrow bandwidth of a Rydberg transition. By applying a second field resonant with an adjacent Rydber… ▽ More We demonstrate the use of multiple atomic-level Rydberg-atom schemes for continuous frequency detection of radio frequency (RF) fields. Resonant detection of RF fields by electromagnetically-induced transparency and Autler-Townes (AT) in Rydberg atoms is typically limited to frequencies within the narrow bandwidth of a Rydberg transition. By applying a second field resonant with an adjacent Rydberg transition, far-detuned fields can be detected through a two-photon resonance AT splitting. This two-photon AT splitting method is several orders of magnitude more sensitive than off-resonant detection using the Stark shift. We present the results of various experimental configurations and a theoretical analysis to illustrate the effectiveness of this multiple level scheme. These results show that this approach allows for the detection of frequencies in continuous band between resonances with adjacent Rydberg states. △ Less

Submitted 21 May, 2021; originally announced May 2021.

Journal ref: Phys. Rev. A 104, 032824 (2021)

High amplification laser-pressure optic enables ultra-low uncertainty measurements at kilowatts

Authors: Alexandra B. Artusio-Glimpse, Kyle A. Rogers, Paul A. Williams, John H. Lehman

Abstract: We present the first measurements of kilowatt laser power with an uncertainty less than 1 %. These represent progress toward the most accurate measurements of laser power above 1 kW at 1070 nm wavelength and establish a more precise link between force metrology and laser power metrology. Radiation pressure, or photon momentum, is a relatively new method of non-destructively measuring laser power.… ▽ More We present the first measurements of kilowatt laser power with an uncertainty less than 1 %. These represent progress toward the most accurate measurements of laser power above 1 kW at 1070 nm wavelength and establish a more precise link between force metrology and laser power metrology. Radiation pressure, or photon momentum, is a relatively new method of non-destructively measuring laser power. We demonstrate how a multiple reflection optical system amplifies the pressure of a kilowatt class laser incoherently to improve the signal to noise ratio in a radiation pressure-based measurement. With 14 incoherent reflections of the laser, we measure a total uncertainty of 0.26 % for an input power of 10 kW and 0.46 % for an input power of 1 kW at the 95 % confidence level. These measurements of absolute power are traceable to the SI kilogram and mark a state-of-the-art improvement in measurement precision by a factor of four. △ Less

Submitted 17 May, 2021; originally announced May 2021.

Comments: 23 pages, 12 figures, submitted to IOP journal

Atomic Spectra in a Six-Level Scheme for Electromagnetically Induced Transparency and Autler-Townes Splitting in Rydberg Atoms

Authors: Amy K. Robinson, Alexandra Artusio-Glimpse, Matthew T. Simons, Christopher L. Holloway

Abstract: We investigate electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting in Rydberg rubidium atoms for a six-level excitation scheme. In this six-level system, one radio-frequency field simultaneously couples to two high-laying Rydberg states and results in interesting atomic spectra observed in the EIT lines. We present experimental results for several excitation parameters.… ▽ More We investigate electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting in Rydberg rubidium atoms for a six-level excitation scheme. In this six-level system, one radio-frequency field simultaneously couples to two high-laying Rydberg states and results in interesting atomic spectra observed in the EIT lines. We present experimental results for several excitation parameters. We also present two theoretical models for this atomic system, where these two models capture different aspects of the observed spectra. One is a six-level model used to predict dominant spectral features and the other a more complex eight-level model used to predict the full characteristics of this system. Both models shows very good agreement with the experimental data. △ Less

Submitted 28 September, 2020; originally announced September 2020.

Comments: 13 pages, 11 figures

Journal ref: Phys. Rev. A 103, 023704 (2021)

Micromachined force scale for optical power measurement by radiation pressure sensing

Authors: Ivan Ryger, Alexandra B. Artusio-Glimpse, Paul Williams, Nathan Tomlin, Michelle Stephens, Kyle Rogers, Matthew Spidell, John Lehman

Abstract: We introduce a micromachined force scale for laser power measurement by means of radiation pressure sensing. With this technique, the measured laser light is not absorbed and can be utilized while being measured. We employ silicon micromachining technology to construct a miniature force scale, opening the potential to its use for fast in-line laser process monitoring. Here we describe the mechanic… ▽ More We introduce a micromachined force scale for laser power measurement by means of radiation pressure sensing. With this technique, the measured laser light is not absorbed and can be utilized while being measured. We employ silicon micromachining technology to construct a miniature force scale, opening the potential to its use for fast in-line laser process monitoring. Here we describe the mechanical sensing principle and conversion to an electrical signal. We further outline an electrostatic force substitution process for nulling of the radiation pressure force on the sensor mirror. Finally, we look at the performance of a proof-of-concept device in open-loop operation (without the nulling electrostatic force) subjected to a modulated laser at 250 W and find its response time is less than 20 ms with noise floor dominated by electronics at 2.5 W/root(Hz). △ Less

Submitted 27 June, 2018; originally announced June 2018.

Measurement of Radio-Frequency Radiation Pressure

Authors: Alexandra Artusio-Glimpse, Matt T. Simons, Ivan Ryger, Marc Kautz, John Lehman, Christopher L. Holloway

Abstract: We perform measurements of the radiation pressure of a radio-frequency (RF) electromagnetic field which may lead to a new SI-traceable power calibration. There are several groups around the world investigating methods to perform more direct SI traceable measurement of RF power (where RF is defined to range from 100s of MHz to THz). A measurement of radiation pressure offers the possibility for a p… ▽ More We perform measurements of the radiation pressure of a radio-frequency (RF) electromagnetic field which may lead to a new SI-traceable power calibration. There are several groups around the world investigating methods to perform more direct SI traceable measurement of RF power (where RF is defined to range from 100s of MHz to THz). A measurement of radiation pressure offers the possibility for a power measure traceable to the kilogram and to Planck's constant through the redefined SI. Towards this goal, we demonstrate the ability to measure the radiation pressure/force carried in a field at 15~GHz. △ Less

Submitted 12 February, 2018; originally announced February 2018.

Comments: 2 pages 4 figures