-
Morphing tree drawings in a small 3D grid
Authors:
Elena Arseneva,
Rahul Gangopadhyay,
Aleksandra Istomina
Abstract:
We study crossing-free grid morphs for planar tree drawings using 3D. A morph consists of morphing steps, where vertices move simultaneously along straight-line trajectories at constant speeds. A crossing-free morph is known between two drawings of an $n$-vertex planar graph $G$ with $\mathcal{O}(n)$ morphing steps and using the third dimension it can be reduced to $\mathcal{O}(\log n)$ for an…
▽ More
We study crossing-free grid morphs for planar tree drawings using 3D. A morph consists of morphing steps, where vertices move simultaneously along straight-line trajectories at constant speeds. A crossing-free morph is known between two drawings of an $n$-vertex planar graph $G$ with $\mathcal{O}(n)$ morphing steps and using the third dimension it can be reduced to $\mathcal{O}(\log n)$ for an $n$-vertex tree [Arseneva et al.\ 2019]. However, these morphs do not bound one practical parameter, the resolution. Can the number of steps be reduced substantially by using the third dimension while kee** the resolution bounded throughout the morph? We answer this question in an affirmative and present a 3D non-crossing morph between two planar grid drawings of an $n$-vertex tree in $\mathcal{O}(\sqrt{n} \log n)$ morphing steps. Each intermediate drawing lies in a $3D$ grid of polynomial volume.
△ Less
Submitted 6 October, 2021; v1 submitted 8 June, 2021;
originally announced June 2021.
-
Adjacency Graphs of Polyhedral Surfaces
Authors:
Elena Arseneva,
Linda Kleist,
Boris Klemz,
Maarten Löffler,
André Schulz,
Birgit Vogtenhuber,
Alexander Wolff
Abstract:
We study whether a given graph can be realized as an adjacency graph of the polygonal cells of a polyhedral surface in $\mathbb{R}^3$. We show that every graph is realizable as a polyhedral surface with arbitrary polygonal cells, and that this is not true if we require the cells to be convex. In particular, if the given graph contains $K_5$, $K_{5,81}$, or any nonplanar $3$-tree as a subgraph, no…
▽ More
We study whether a given graph can be realized as an adjacency graph of the polygonal cells of a polyhedral surface in $\mathbb{R}^3$. We show that every graph is realizable as a polyhedral surface with arbitrary polygonal cells, and that this is not true if we require the cells to be convex. In particular, if the given graph contains $K_5$, $K_{5,81}$, or any nonplanar $3$-tree as a subgraph, no such realization exists. On the other hand, all planar graphs, $K_{4,4}$, and $K_{3,5}$ can be realized with convex cells. The same holds for any subdivision of any graph where each edge is subdivided at least once, and, by a result from McMullen et al. (1983), for any hypercube.
Our results have implications on the maximum density of graphs describing polyhedral surfaces with convex cells: The realizability of hypercubes shows that the maximum number of edges over all realizable $n$-vertex graphs is in $Ω(n \log n)$. From the non-realizability of $K_{5,81}$, we obtain that any realizable $n$-vertex graph has $O(n^{9/5})$ edges. As such, these graphs can be considerably denser than planar graphs, but not arbitrarily dense.
△ Less
Submitted 15 May, 2023; v1 submitted 17 March, 2021;
originally announced March 2021.
-
Upward Point Set Embeddings of Paths and Trees
Authors:
Elena Arseneva,
Pilar Cano,
Linda Kleist,
Tamara Mchedlidze,
Saeed Mehrabi,
Irene Parada,
Pavel Valtr
Abstract:
We study upward planar straight-line embeddings (UPSE) of directed trees on given point sets. The given point set $S$ has size at least the number of vertices in the tree. For the special case where the tree is a path $P$ we show that: (a) If $S$ is one-sided convex, the number of UPSEs equals the number of maximal monotone paths in $P$. (b) If $S$ is in general position and $P$ is composed by thr…
▽ More
We study upward planar straight-line embeddings (UPSE) of directed trees on given point sets. The given point set $S$ has size at least the number of vertices in the tree. For the special case where the tree is a path $P$ we show that: (a) If $S$ is one-sided convex, the number of UPSEs equals the number of maximal monotone paths in $P$. (b) If $S$ is in general position and $P$ is composed by three maximal monotone paths, where the middle path is longer than the other two, then it always admits an UPSE on $S$. We show that the decision problem of whether there exists an UPSE of a directed tree with $n$ vertices on a fixed point set $S$ of $n$ points is NP-complete, by relaxing the requirements of the previously known result which relied on the presence of cycles in the graph, but instead fixing position of a single vertex. Finally, by allowing extra points, we guarantee that each directed caterpillar on $n$ vertices and with $k$ switches in its backbone admits an UPSE on every set of $n 2^{k-2}$ points.
△ Less
Submitted 18 December, 2020;
originally announced December 2020.
-
A Complete List of All Convex Polyhedra Made by Gluing Regular Pentagons
Authors:
Elena Arseneva,
Stefan Langerman,
Boris Zolotov
Abstract:
We give a complete description of all convex polyhedra whose surface can be constructed from several congruent regular pentagons by folding and gluing them edge to edge. Our method of determining the graph structure of the polyhedra from a gluing is of independent interest and can be used in other similar settings.
We give a complete description of all convex polyhedra whose surface can be constructed from several congruent regular pentagons by folding and gluing them edge to edge. Our method of determining the graph structure of the polyhedra from a gluing is of independent interest and can be used in other similar settings.
△ Less
Submitted 3 July, 2020;
originally announced July 2020.
-
Sublinear Explicit Incremental Planar Voronoi Diagrams
Authors:
Elena Arseneva,
John Iacono,
Grigorios Koumoutsos,
Stefan Langerman,
Boris Zolotov
Abstract:
A data structure is presented that explicitly maintains the graph of a Voronoi diagram of $N$ point sites in the plane or the dual graph of a convex hull of points in three dimensions while allowing insertions of new sites/points. Our structure supports insertions in $\tilde O (N^{3/4})$ expected amortized time, where $\tilde O$ suppresses polylogarithmic terms. This is the first result to achieve…
▽ More
A data structure is presented that explicitly maintains the graph of a Voronoi diagram of $N$ point sites in the plane or the dual graph of a convex hull of points in three dimensions while allowing insertions of new sites/points. Our structure supports insertions in $\tilde O (N^{3/4})$ expected amortized time, where $\tilde O$ suppresses polylogarithmic terms. This is the first result to achieve sublinear time insertions; previously it was shown by Allen et al. that $Θ(\sqrt{N})$ amortized combinatorial changes per insertion could occur in the Voronoi diagram but a sublinear-time algorithm was only presented for the special case of points in convex position.
△ Less
Submitted 3 July, 2020;
originally announced July 2020.
-
Compatible Paths on Labelled Point Sets
Authors:
Elena Arseneva,
Yeganeh Bahoo,
Ahmad Biniaz,
Pilar Cano,
Farah Chanchary,
John Iacono,
Kshitij Jain,
Anna Lubiw,
Debajyoti Mondal,
Khadijeh Sheikhan,
Csaba D. Tóth
Abstract:
Let $P$ and $Q$ be finite point sets of the same cardinality in $\mathbb{R}^2$, each labelled from $1$ to $n$. Two noncrossing geometric graphs $G_P$ and $G_Q$ spanning $P$ and $Q$, respectively, are called compatible if for every face $f$ in $G_P$, there exists a corresponding face in $G_Q$ with the same clockwise ordering of the vertices on its boundary as in $f$. In particular, $G_P$ and $G_Q$…
▽ More
Let $P$ and $Q$ be finite point sets of the same cardinality in $\mathbb{R}^2$, each labelled from $1$ to $n$. Two noncrossing geometric graphs $G_P$ and $G_Q$ spanning $P$ and $Q$, respectively, are called compatible if for every face $f$ in $G_P$, there exists a corresponding face in $G_Q$ with the same clockwise ordering of the vertices on its boundary as in $f$. In particular, $G_P$ and $G_Q$ must be straight-line embeddings of the same connected $n$-vertex graph.
Deciding whether two labelled point sets admit compatible geometric paths is known to be NP-complete. We give polynomial-time algorithms to find compatible paths or report that none exist in three scenarios: $O(n)$ time for points in convex position; $O(n^2)$ time for two simple polygons, where the paths are restricted to remain inside the closed polygons; and $O(n^2 \log n)$ time for points in general position if the paths are restricted to be monotone.
△ Less
Submitted 16 April, 2020;
originally announced April 2020.
-
Which convex polyhedra can be made by gluing regular hexagons?
Authors:
Elena Arseneva,
Stefan Langerman
Abstract:
Which convex 3D polyhedra can be obtained by gluing several regular hexagons edge-to-edge? It turns out that there are only 15 possible types of shapes, 5 of which are doubly-covered 2D polygons. We give examples for most of them, including all simplicial and all flat shapes, and give a characterization for the latter ones. It is open whether the remaining can be realized.
Which convex 3D polyhedra can be obtained by gluing several regular hexagons edge-to-edge? It turns out that there are only 15 possible types of shapes, 5 of which are doubly-covered 2D polygons. We give examples for most of them, including all simplicial and all flat shapes, and give a characterization for the latter ones. It is open whether the remaining can be realized.
△ Less
Submitted 5 February, 2020;
originally announced February 2020.
-
Pole Dancing: 3D Morphs for Tree Drawings
Authors:
Elena Arseneva,
Prosenjit Bose,
Pilar Cano,
Anthony D'Angelo,
Vida Dujmovic,
Fabrizio Frati,
Stefan Langerman,
Alessandra Tappini
Abstract:
We study the question whether a crossing-free 3D morph between two straight-line drawings of an $n$-vertex tree can be constructed consisting of a small number of linear morphing steps. We look both at the case in which the two given drawings are two-dimensional and at the one in which they are three-dimensional. In the former setting we prove that a crossing-free 3D morph always exists with…
▽ More
We study the question whether a crossing-free 3D morph between two straight-line drawings of an $n$-vertex tree can be constructed consisting of a small number of linear morphing steps. We look both at the case in which the two given drawings are two-dimensional and at the one in which they are three-dimensional. In the former setting we prove that a crossing-free 3D morph always exists with $O(\log n)$ steps, while for the latter $Θ(n)$ steps are always sufficient and sometimes necessary.
△ Less
Submitted 3 September, 2018; v1 submitted 31 August, 2018;
originally announced August 2018.
-
Reconstructing a convex polygon from its $ω$-cloud
Authors:
Elena Arseneva,
Prosenjit Bose,
Jean-Lou De Carufel,
Sander Verdonschot
Abstract:
An $ω$-wedge is the closed set of points contained between two rays that are emanating from a single point (the apex), and are separated by an angle $ω< π$. Given a convex polygon $P$, we place the $ω$-wedge such that $P$ is inside the wedge and both rays are tangent to $P$. The set of apex positions of all such placements of the $ω$-wedge is called the $ω$-cloud of $P$.
We investigate reconstru…
▽ More
An $ω$-wedge is the closed set of points contained between two rays that are emanating from a single point (the apex), and are separated by an angle $ω< π$. Given a convex polygon $P$, we place the $ω$-wedge such that $P$ is inside the wedge and both rays are tangent to $P$. The set of apex positions of all such placements of the $ω$-wedge is called the $ω$-cloud of $P$.
We investigate reconstructing a polygon $P$ from its $ω$-cloud. Previous work on reconstructing $P$ from probes with the $ω$-wedge required knowledge of the points of tangency between $P$ and the two rays of the $ω$-wedge in addition to the location of the apex. Here we consider the setting where the maximal $ω$-cloud alone is given. We give two conditions under which it uniquely defines $P$: (i) when $ω< π$ is fixed/given, or (ii) when what is known is that $ω< π/2$. We show that if neither of these two conditions hold, then $P$ may not be unique. We show that, when the uniqueness conditions hold, the polygon $P$ can be reconstructed in $O(n)$ time with $O(1)$ working space in addition to the input, where $n$ is the number of arcs in the input $ω$-cloud.
△ Less
Submitted 20 March, 2019; v1 submitted 7 January, 2018;
originally announced January 2018.
-
Rectilinear Link Diameter and Radius in a Rectilinear Polygonal Domain
Authors:
Elena Arseneva,
Man-Kwun Chiu,
Matias Korman,
Aleksandar Markovic,
Yoshio Okamoto,
Aurélien Ooms,
André van Renssen,
Marcel Roeloffzen
Abstract:
We study the computation of the diameter and radius under the rectilinear link distance within a rectilinear polygonal domain of $n$ vertices and $h$ holes. We introduce a \emph{graph of oriented distances} to encode the distance between pairs of points of the domain. This helps us transform the problem so that we can search through the candidates more efficiently. Our algorithm computes both the…
▽ More
We study the computation of the diameter and radius under the rectilinear link distance within a rectilinear polygonal domain of $n$ vertices and $h$ holes. We introduce a \emph{graph of oriented distances} to encode the distance between pairs of points of the domain. This helps us transform the problem so that we can search through the candidates more efficiently. Our algorithm computes both the diameter and the radius in $\min \{\,O(n^ω), O(n^2 + nh \log h + χ^2)\,\}$ time, where $ω<2.373$ denotes the matrix multiplication exponent and $χ\in Ω(n)\cap O(n^2)$ is the number of edges of the graph of oriented distances. We also provide a faster algorithm for computing the diameter that runs in $O(n^2 \log n)$ time.
△ Less
Submitted 3 July, 2020; v1 submitted 15 December, 2017;
originally announced December 2017.
-
Differential Geometry of generalized almost quaternionic structures, 2
Authors:
V. F. Kirichenko,
O. E Arseneva
Abstract:
Notions of self-dual and anti self-dual almost quaternionic structures are introduced. The complete classification of self-dual and anti self-dual generalized Kaehler manifolds is obtained.
Notions of self-dual and anti self-dual almost quaternionic structures are introduced. The complete classification of self-dual and anti self-dual generalized Kaehler manifolds is obtained.
△ Less
Submitted 17 February, 1997;
originally announced February 1997.
-
Differential Geometry of generalized almost quaternionic structures, 1
Authors:
V. F. Kirichenko,
O. E Arseneva
Abstract:
The fibre bundles adjoint to generalized almost quaternionic structures are studied. The most important classes of generalized almost quaternionic manifolds are considered.
The fibre bundles adjoint to generalized almost quaternionic structures are studied. The most important classes of generalized almost quaternionic manifolds are considered.
△ Less
Submitted 17 February, 1997;
originally announced February 1997.