-
Building hybridized 28-baseline pupil-remap** photonic interferometers for future high resolution imaging
Authors:
Nick Cvetojevic,
Barnaby R. M. Norris,
Simon Gross,
Nemanja Jovanovic,
Alexander Arriola,
Sylvestre Lacour,
Takayuki Kotani,
Jon S. Lawrence,
Michael J. Withford,
Peter Tuthill
Abstract:
One key advantage of single-mode photonic technologies for interferometric use is their ability to easily scale to an ever increasing number of inputs without a major increase in the overall device size, compared to traditional bulk optics. This is particularly important for the upcoming ELT generation of telescopes currently under construction. We demonstrate the fabrication and characterization…
▽ More
One key advantage of single-mode photonic technologies for interferometric use is their ability to easily scale to an ever increasing number of inputs without a major increase in the overall device size, compared to traditional bulk optics. This is particularly important for the upcoming ELT generation of telescopes currently under construction. We demonstrate the fabrication and characterization of a novel hybridized photonic interferometer, with 8 simultaneous inputs, forming 28 baselines, the largest amount to-date. Utilizing different photonic fabrication technologies, we combine a 3D pupil remapper with a planar 8-port ABCD pairwise beam combiner, along with the injection optics necessary for telescope use, into a single integrated monolithic device. We successfully realized a combined device called Dragonfly, which demonstrates a raw instrumental closure-phase stability down to $0.9^{\circ}$ over $8π$ phase piston error, relating to a detection contrast of $\sim6.5\times 10^{-4}$ on an Adaptive-Optics corrected 8-m telescope. This prototype successfully demonstrates advanced hybridization and packaging techniques necessary for on-sky use for high-contrast detection at small inner working angles, ideally complementing what can currently be achieved using coronagraphs.
△ Less
Submitted 4 May, 2021;
originally announced May 2021.
-
Modeling and Implementation of Quadcopter Autonomous Flight Based on Alternative Methods to Determine Propeller Parameters
Authors:
Gene Patrick S. Rible,
Nicolette Ann A. Arriola,
Manuel C. Ramos Jr
Abstract:
To properly simulate and implement a quadcopter flight control for intended load and flight conditions, the quadcopter model must have parameters on various relationships including propeller thrust-torque, thrust-PWM, and thrust--angular speed to a certain level of accuracy. Thrust-torque modeling requires an expensive reaction torque measurement sensor. In the absence of sophisticated equipment,…
▽ More
To properly simulate and implement a quadcopter flight control for intended load and flight conditions, the quadcopter model must have parameters on various relationships including propeller thrust-torque, thrust-PWM, and thrust--angular speed to a certain level of accuracy. Thrust-torque modeling requires an expensive reaction torque measurement sensor. In the absence of sophisticated equipment, the study comes up with alternative methods to complete the quadcopter model. The study also presents a method of modeling the rotational aerodynamic drag on the quadcopter. Although the resulting model of the reaction torque generated by the quadcopter's propellers and the model of the drag torque acting on the quadcopter body that are derived using the methods in this study may not yield the true values of these quantities, the experimental modeling techniques presented in this work ensure that the derived dynamic model for the quadcopter will nevertheless behave identically with the true model for the quadcopter. The derived dynamic model is validated by basic flight controller simulation and actual flight implementation. The model is used as basis for a quadcopter design, which eventually is used for test purposes of basic flight control. This study serves as a baseline for fail-safe control of a quadcopter experiencing an unexpected motor failure.
△ Less
Submitted 17 October, 2020;
originally announced October 2020.
-
The Wireless Train Communication Network: Roll2Rail vision
Authors:
Juan Moreno García-Loygorri,
Javier Goikoetxea,
Eneko Echeverría,
Aitor Arriola,
Iñaki Val,
Stephan Sand,
Paul Unterhuber,
Francisco del Río
Abstract:
This paper explains the main results obtained from the research carried out in the work package 2 (WP2) of the Roll2Rail (R2R) project. This project aims to develop key technologies and to remove already identified blocking points for radical innovation in the field of railway vehicles, to increase their operational reliability and to reduce life-cycle costs. This project started in May 2015 and h…
▽ More
This paper explains the main results obtained from the research carried out in the work package 2 (WP2) of the Roll2Rail (R2R) project. This project aims to develop key technologies and to remove already identified blocking points for radical innovation in the field of railway vehicles, to increase their operational reliability and to reduce life-cycle costs. This project started in May 2015 and has been funded by the Horizon 2020 program of the European Commission. The goal for WP2 is to research on both technologies and architectures to develop a new wireless Train Communication Network (TCN) within IEC61375 standard series. This TCN is today entirely wired and is used for Train Control and Monitoring System (TCMS) functions (some of them safetyrelated), operator-oriented services and customer-oriented services. This paradigm shift from wired to wireless means a removal of wirings implies, among other benefits, a significant reduction of life cycle costs due to the removal of cables, and the simplification of the train coupling procedure, among others.
△ Less
Submitted 5 October, 2020;
originally announced October 2020.
-
Fail-Safe Controller Architectures for Quadcopter with Motor Failures
Authors:
Gene Patrick S. Rible,
Nicolette Ann A. Arriola,
Manuel C. Ramos, Jr
Abstract:
A fail-safe algorithm in case of motor failure was developed, simulated, and tested. For practical fail-safe flight, the quadcopter may fly with only three or two opposing propellers. Altitude for two-propeller architecture was maintained by a PID controller that is independent from the inner and outer controllers. A PID controller on propeller force deviations from equilibrium was augmented to th…
▽ More
A fail-safe algorithm in case of motor failure was developed, simulated, and tested. For practical fail-safe flight, the quadcopter may fly with only three or two opposing propellers. Altitude for two-propeller architecture was maintained by a PID controller that is independent from the inner and outer controllers. A PID controller on propeller force deviations from equilibrium was augmented to the inner controller of the three-propeller architecture. Both architectures used LQR for the inner attitude controller and a damped second order outer controller that zeroes the error along the horizontal coordinates. The restrictiveness, stability, robustness, and symmetry of these architectures were investigated with respect to their output limits, initial conditions, and controller frequencies. Although the three-propeller architecture allows for distribution of propeller forces, the two-propeller architecture is more efficient, robust, and stable. The two-propeller architecture is also robust to model uncertainties. It was shown that higher yaw rate leads to greater stability when operating in fail-safe mode.
△ Less
Submitted 21 September, 2020;
originally announced September 2020.
-
Photonics-based mid-infrared interferometry: 4-year results of the ALSI project and future prospects
Authors:
L. Labadie,
S. Minardi,
J. Tepper,
R. Diener,
B. Muthusubramanian,
J. -U. Pott,
S. Nolte,
S. Gross,
A. Arriola,
M. J. Withford
Abstract:
In this contribution, we review the results of the ALSI project (Advanced Laser-writing for Stellar Interferometry), aimed at assessing the potential of ultrafast laser writing to fabricate mid-infared integrated optics (IO) devices with performance compatible with an implementation in real interferometric instruments like Hi5 or PFI. Waveguides for the L, L' and M bands with moderate propagation…
▽ More
In this contribution, we review the results of the ALSI project (Advanced Laser-writing for Stellar Interferometry), aimed at assessing the potential of ultrafast laser writing to fabricate mid-infared integrated optics (IO) devices with performance compatible with an implementation in real interferometric instruments like Hi5 or PFI. Waveguides for the L, L' and M bands with moderate propagation losses were manufactured in Gallium Lanthanum Sulfide and ZBLAN glasses and used to develop photonic building blocks as well as a full mid-IR 4-telescope beam combiner. We discuss the advantages and disadvantages of the tested combiners and discuss a possible roadmap for the continuation of this work.
△ Less
Submitted 5 March, 2020;
originally announced March 2020.
-
First on-sky demonstration of an integrated-photonic nulling-interferometer: The GLINT instrument
Authors:
Barnaby R. M. Norris,
Nick Cvetojevic,
Tiphaine Lagadec,
Nemanja Jovanovic,
Simon Gross,
Alexander Arriola,
Thomas Gretzinger,
Marc-Antoine Martinod,
Olivier Guyon,
Julien Lozi,
Michael J. Withford,
Jon S. Lawrence,
Peter Tuthill
Abstract:
The characterisation of exoplanets is critical to understanding planet diversity and formation, their atmospheric composition and the potential for life. This endeavour is greatly enhanced when light from the planet can be spatially separated from that of the host star. One potential method is nulling interferometry, where the contaminating starlight is removed via destructive interference. The GL…
▽ More
The characterisation of exoplanets is critical to understanding planet diversity and formation, their atmospheric composition and the potential for life. This endeavour is greatly enhanced when light from the planet can be spatially separated from that of the host star. One potential method is nulling interferometry, where the contaminating starlight is removed via destructive interference. The GLINT instrument is a photonic nulling interferometer with novel capabilities that has now been demonstrated in on-sky testing. The instrument fragments the telescope pupil into sub-apertures that are injected into waveguides within a single-mode photonic chip. Here, all requisite beam splitting, routing and recombination is performed using integrated photonic components. We describe the design, construction and laboratory testing of our GLINT pathfinder instrument. We then demonstrate the efficacy of this method on sky at the Subaru Telescope, achieving a null-depth precision on sky of $\sim10^{-4}$ and successfully determining the angular diameter of stars (via their null-depth measurements) to milli-arcsecond accuracy. A statistical method for analysing such data is described, along with an outline of the next steps required to deploy this technique for cutting-edge science.
△ Less
Submitted 21 November, 2019;
originally announced November 2019.
-
Role of ion migrations and structural reorganisations in femtosecond laser direct-written chalcogenide glass waveguides
Authors:
Thomas Gretzinger,
Toney Teddy Fernandez,
Simon Gross,
Alexander Arriola,
Michael Withford
Abstract:
Formation of femtosecond laser direct-written positive refractive index waveguides in Gallium Lanthanum Sulphide (GLS) glass is explained for the first time. Evidence of structural changes and ion migration are presented using Raman spectroscopy and electron probe microanalysis (EPMA), respectively. 2-D Raman spectra maps reveal a peak shift and full-width at half maximum variations in the symmetr…
▽ More
Formation of femtosecond laser direct-written positive refractive index waveguides in Gallium Lanthanum Sulphide (GLS) glass is explained for the first time. Evidence of structural changes and ion migration are presented using Raman spectroscopy and electron probe microanalysis (EPMA), respectively. 2-D Raman spectra maps reveal a peak shift and full-width at half maximum variations in the symmetric vibrations of GaS4 main band. For the first time, the 2D map of the boson band was successfully used to identify and understand the material densification profile in a high refractive index glass waveguide. Finally EPMA provided the evidence of ion migration due to sulphur and the observation of an anion (S2-) migration causing material modification is also reported for the first time.
△ Less
Submitted 12 June, 2018;
originally announced June 2018.
-
Pioneering high contrast science instruments for planet characterization on giant segmented mirror telescopes
Authors:
N. Jovanovic,
O. Guyon,
J. Lozi,
M. Tamura,
B. Norris,
P. Tuthill,
E. Huby,
G. Perrin,
S. Lacour,
F. Marchis,
G. Duchene,
L. Gauchet,
M. Ireland,
T. Feger,
A. Rains,
J. Bento,
C. Schwab,
D. Coutts,
N. Cvetojevic,
S. Gross,
A. Arriola,
T. Lagadec,
S. Goebel,
D. Hall,
S. Jacobson
, et al. (14 additional authors not shown)
Abstract:
A suite of science instruments is critical to any high contrast imaging facility, as it defines the science capabilities and observing modes available. SCExAO uses a modular approach which allows for state-of-the-art visitor modules to be tested within an observatory environment on an 8-m class telescope. This allows for rapid prototy** of new and innovative imaging techniques that otherwise tak…
▽ More
A suite of science instruments is critical to any high contrast imaging facility, as it defines the science capabilities and observing modes available. SCExAO uses a modular approach which allows for state-of-the-art visitor modules to be tested within an observatory environment on an 8-m class telescope. This allows for rapid prototy** of new and innovative imaging techniques that otherwise take much longer in traditional instrument design. With the aim of maturing science modules for an advanced high contrast imager on an giant segmented mirror telescopes (GSMTs) that will be capable of imaging terrestrial planets, we offer an overview and status update on the various science modules currently under test within the SCExAO instrument.
△ Less
Submitted 22 December, 2017;
originally announced December 2017.
-
Modal noise characterisation of a hybrid reformatter
Authors:
Izabela Spaleniak,
David G. MacLachlan,
Itandehui Gris-Sánchez,
Debaditya Choudhury,
Robert J. Harris,
Alexander Arriola,
Jeremy R. Allington-Smith,
Timothy A. Birks,
Robert R. Thomson
Abstract:
This paper reports on the modal noise characterisation of a hybrid reformatter. The device consists of a multicore-fibre photonic lantern and an ultrafast laser-inscribed slit reformatter. It operates around 1550 nm and supports 92 modes. Photonic lanterns transform a multimode signal into an array of single-mode signals, and thus combine the high coupling efficiency of multimode fibres with the d…
▽ More
This paper reports on the modal noise characterisation of a hybrid reformatter. The device consists of a multicore-fibre photonic lantern and an ultrafast laser-inscribed slit reformatter. It operates around 1550 nm and supports 92 modes. Photonic lanterns transform a multimode signal into an array of single-mode signals, and thus combine the high coupling efficiency of multimode fibres with the diffraction-limited performance of single-mode fibres. This paper presents experimental measurements of the device point spread function properties under different coupling conditions, and its throughput behaviour at high spectral resolution. The device demonstrates excellent scrambling but its point spread function is not completely stable. Mode field diameter and mode barycentre position at the device output vary as the multicore-fibre is agitated due to the fabrication imperfections.
△ Less
Submitted 11 July, 2016;
originally announced July 2016.
-
Efficient photonic reformatting of celestial light for diffraction-limited spectroscopy
Authors:
David G. MacLachlan,
Robert J. Harris,
Itandehui Gris-Sánchez,
Timothy J. Morris,
Debaditya Choudhury,
Eric Gendron,
Alastair G. Basden,
Izabela J. Spaleniak,
Alexander Arriola,
Tim A. Birks,
Jeremy R. Allington-Smith,
Robert R. Thomson
Abstract:
The spectral resolution of a dispersive astronomical spectrograph is limited by the trade-off between throughput and the width of the entrance slit. Photonic guided-wave transitions have been proposed as a route to bypass this trade-off, by enabling the efficient reformatting of incoherent seeing-limited light collected by the telescope into a linear array of single modes: a pseudo-slit which is h…
▽ More
The spectral resolution of a dispersive astronomical spectrograph is limited by the trade-off between throughput and the width of the entrance slit. Photonic guided-wave transitions have been proposed as a route to bypass this trade-off, by enabling the efficient reformatting of incoherent seeing-limited light collected by the telescope into a linear array of single modes: a pseudo-slit which is highly multimode in one axis but diffraction-limited in the dispersion axis of the spectrograph. It is anticipated that the size of a single-object spectrograph fed with light in this manner would be essentially independent of the telescope aperture size. A further anticipated benefit is that such spectrographs would be free of `modal noise', a phenomenon that occurs in high-resolution multimode fibre-fed spectrographs due to the coherent nature of the telescope point-spread-function (PSF). We address these aspects by integrating a multicore fibre photonic lantern with an ultrafast laser inscribed three-dimensional waveguide interconnect to spatially reformat the modes within the PSF into a diffraction-limited pseudo-slit. Using the CANARY adaptive optics (AO) demonstrator on the William Herschel Telescope, and 1530 $\pm$ 80 nm stellar light, the device is found to exhibit a transmission of 47-53 % depending upon the mode of AO correction applied. We also show the advantage of using AO to couple light into such a device by sampling only the core of the CANARY PSF. This result underscores the possibility that a fully-optimised guided-wave device can be used with AO to provide efficient spectroscopy at high spectral resolution.
△ Less
Submitted 22 December, 2015;
originally announced December 2015.
-
Ultrafast laser inscription of mid-IR directional couplers for stellar interferometry
Authors:
Alexander Arriola,
Sebabrata Mukherjee,
Debaditya Choudhury,
Lucas Labadie,
Robert R. Thomson
Abstract:
We report the ultrafast laser fabrication and mid-IR characterization (3.39 microns) of four-port evanescent field directional couplers. The couplers were fabricated in a commercial gallium lanthanum sulphide glass substrate using sub-picosecond laser pulses of 1030 nm light. Straight waveguides inscribed using optimal fabrication parameters were found to exhibit propagation losses of 0.8 dB/cm. A…
▽ More
We report the ultrafast laser fabrication and mid-IR characterization (3.39 microns) of four-port evanescent field directional couplers. The couplers were fabricated in a commercial gallium lanthanum sulphide glass substrate using sub-picosecond laser pulses of 1030 nm light. Straight waveguides inscribed using optimal fabrication parameters were found to exhibit propagation losses of 0.8 dB/cm. A series of couplers were inscribed with different interaction lengths, and we demonstrate power splitting ratios of between 8% and 99% for mid-IR light with a wavelength of 3.39 microns. These results clearly demonstrate that ultrafast laser inscription can be used to fabricate high quality evanescent field couplers for future applications in astronomical interferometry.
△ Less
Submitted 25 August, 2014;
originally announced August 2014.
-
Fabrication of high quality sub-micron Au gratings over large areas with pulsed laser interference lithography for SPR sensors
Authors:
Alexander Arriola,
Ainara Rodriguez,
Noemi Perez,
Txaber Tavera,
Michael J. Withford,
Alexander Fuerbach,
Santiago M. Olaizola
Abstract:
Metallic gratings were fabricated using high energy laser interference lithography with a frequency tripled Nd:YAG nanosecond laser. The grating structures were first recorded in a photosensitive layer and afterwards transferred to an Au film. High quality Au gratings with a period of 770 nm and peak-to-valley heights of 20-60 nm exhibiting plasmonic resonance response were successfully designed,…
▽ More
Metallic gratings were fabricated using high energy laser interference lithography with a frequency tripled Nd:YAG nanosecond laser. The grating structures were first recorded in a photosensitive layer and afterwards transferred to an Au film. High quality Au gratings with a period of 770 nm and peak-to-valley heights of 20-60 nm exhibiting plasmonic resonance response were successfully designed, fabricated and characterized.
△ Less
Submitted 11 February, 2013;
originally announced February 2013.
-
Low bend loss waveguides enable compact, efficient 3D photonic chips
Authors:
Alexander Arriola,
Simon Gross,
Nemanja Jovanovic,
Ned Charles,
Peter G. Tuthill,
Santiago M. Olaizola,
Alexander Fuerbach,
Michael J. Withford
Abstract:
We present a novel method to fabricate low bend loss femtosecond-laser written waveguides that exploits the differential thermal stabilities of laser induced refractive index modifications. The technique consists of a two-step process; the first involves fabricating large multimode waveguides, while the second step consists of a thermal post-annealing process, which erases the outer ring of the re…
▽ More
We present a novel method to fabricate low bend loss femtosecond-laser written waveguides that exploits the differential thermal stabilities of laser induced refractive index modifications. The technique consists of a two-step process; the first involves fabricating large multimode waveguides, while the second step consists of a thermal post-annealing process, which erases the outer ring of the refractive index profile, enabling single mode operation in the C-band. By using this procedure we report waveguides with sharp bends (down to 16.6 mm radius) and high (80%) normalized throughputs. This procedure was used to fabricate an efficient 3D, photonic device known as a pupil-remapper with negligible bend losses for the first time. The process will also allow for complex chips, based on 10's - 100's of waveguides to be realized in a compact foot print with short fabrication times.
△ Less
Submitted 11 February, 2013;
originally announced February 2013.