-
Moss-like growth of metal electrodes: On the role of competing faradaic reactions and fast-charging
Authors:
J. X. Kent Zheng,
Jiefu Yin,
Tian Tang,
Lynden A. Archer
Abstract:
Uncontrolled crystal growth during electroreduction of reactive metals in liquid electrolytes produces porous, low-density, mossy metal deposits that grow primarily along the surface normal vector to a planar electrode substrate. The moss-like deposits are fragile and cause premature failure of batteries by chemical, physical, and mechanical pathways. Here we use electroanalytical Rotating-Disk El…
▽ More
Uncontrolled crystal growth during electroreduction of reactive metals in liquid electrolytes produces porous, low-density, mossy metal deposits that grow primarily along the surface normal vector to a planar electrode substrate. The moss-like deposits are fragile and cause premature failure of batteries by chemical, physical, and mechanical pathways. Here we use electroanalytical Rotating-Disk Electrode (RDE) studies in a three-electrode electrochemical cell to elucidate the fundamental origin of moss-like growth of metals. We report that competing Faradaic reactions occurring on the electrode surface is the source of the phenomenon. On this basis, we conclude that a moss-like growth regime can be accessed during electrodeposition of any metal by subtle shifts in electrolyte chemistry and deposition rate. Specifically, for Zn, a metal that conventionally is not known to form moss-like electrodeposits, obvious moss-like deposition patterns emerge at low-current densities in strongly-alkaline electrolytes that undergo electroreduction to form an interphase on the electrodeposited Zn. Conversely, we find that under conditions where the rate of metal electroplating is large relative to that of other competing Faradaic reactions, it is possible to eliminate the mossy-like growth regime for Zn. Taken together, our findings open up a new approach for simultaneously achieving favorable metal deposition morphology and fast charging in next-generation batteries using metal anodes.
△ Less
Submitted 21 January, 2023;
originally announced February 2023.
-
Electroconvective flow in presence of polyethylene glycol oligomer additives
Authors:
Arpita Sharma,
Ankush Mukherjee,
Alexander Warren,
Shuo **,
Gao** Li,
Donald L. Koch,
Lynden A. Archer
Abstract:
Metal electrodeposition in batteries is fundamentally unstable and affected by different instabilities depending on operating conditions and chemical composition. Particularly at high charging rates, a hydrodynamic instability called electroconvection sets in that aggravates the situation by creating non-uniform ion flux and preferential deposition at the electrode. Here, we experimentally investi…
▽ More
Metal electrodeposition in batteries is fundamentally unstable and affected by different instabilities depending on operating conditions and chemical composition. Particularly at high charging rates, a hydrodynamic instability called electroconvection sets in that aggravates the situation by creating non-uniform ion flux and preferential deposition at the electrode. Here, we experimentally investigate how oligomer additives interact with the hydrodynamic instability at a cation selective interface. From electrochemical measurements and direct visualization experiments, we find that electroconvection is delayed and suppressed at all voltage in the presence of oligomers. Our results also reveal that it is important to consider the role of polymers at the interface, in addition to their bulk effects, to understand the stabilization effect and its mechanism.
△ Less
Submitted 20 November, 2022;
originally announced November 2022.
-
Suppression of electroconvection due to van der Waals attraction of polymer additives towards the metal electrode
Authors:
Ankush Mukherjee,
Lynden A. Archer,
Donald L. Koch
Abstract:
Electroconvection in rechargeable batteries enhances the growth of dendrites at the electrode surface. The addition of low molecular weight polymers to the electrolyte in batteries results in the formation of a thin layer of higher polymer concentration near the electrode. This is due to van der Waals forces of attraction between the metal electrode and the polymers dissolved in the electrolyte. T…
▽ More
Electroconvection in rechargeable batteries enhances the growth of dendrites at the electrode surface. The addition of low molecular weight polymers to the electrolyte in batteries results in the formation of a thin layer of higher polymer concentration near the electrode. This is due to van der Waals forces of attraction between the metal electrode and the polymers dissolved in the electrolyte. The van der Waals forces act as a restoring body force on the electrolyte and oppose the growth of perturbations. Using linear stability analysis, we show that this force opposes electroconvective flow. This increases the critical voltage required for the onset of electroconvection.
△ Less
Submitted 27 October, 2022;
originally announced October 2022.
-
Understanding The Reversible Electrodeposition of Al in Low-Cost Room Temperature Molten Salts
Authors:
Regina Garcia-Mendez,
**gxu Zheng,
David C. Bock,
Cherno Jaye,
Daniel A. Fischer,
Amy C. Marschilok,
Kenneth J. Takeuchi,
Esther S. Takeuchi,
Lynden A. Archer
Abstract:
Aluminum is the most earth-abundant metal, is trivalent, is inert in ambient humid air, and has a density approximately four-times that of lithium at room temperature. These attributes make it an attractive material for cost-effective, long-duration storage of electrical energy in batteries. Scientific discoveries in the past decade have established that secondary Al batteries can be created by pa…
▽ More
Aluminum is the most earth-abundant metal, is trivalent, is inert in ambient humid air, and has a density approximately four-times that of lithium at room temperature. These attributes make it an attractive material for cost-effective, long-duration storage of electrical energy in batteries. Scientific discoveries in the past decade have established that secondary Al batteries can be created by paring an Al anode with a graphite or transition metal oxide cathode, in imidazolium-based, room-temperature ionic-liquid-Aluminum chloride electrolytes. Here we report findings from a systematic study that sheds light on the structural requirements, physicochemical, and transport properties of the ionic liquid electrolytes responsible for the high reversibility of Al battery anodes. We find that the most important interfacial and transport properties of these electrolytes can be achieved in other electrolytes, including ammonium-based molten salts that are available at costs as much as twenty-times lower than the ionic liquid-Aluminum chloride melt. High Al reversibility in ammonium- and imidazolium-based electrolytes is specifically shown to require a critical ratio of the solvation species, where Lewis acidity and beneficial interfacial reactions continuously etch the alumina resistive interfacial layer and form beneficial solid electrolyte interphase at the anode. We report further that successful development of new electrolyte families that support high Al anode reversibility also provides a good platform for detailed studies of the working mechanisms of an intercalation graphite cathode using X-ray absorption spectroscopy. Our findings therefore open new opportunities for develo** simple, cost-effective, room-temperature Al batteries that enable long-duration electrical energy storage.
△ Less
Submitted 21 October, 2022;
originally announced October 2022.
-
The Sabatier principle for Battery Anodes: Chemical Kinetics and Reversible Electrodeposition at Heterointerfaces
Authors:
**gxu Zheng,
Yue Deng,
Wenzao Li,
Jiefu Yin,
Patrick J. West,
Tian Tang,
Xiao Tong,
David C. Bock,
Shuo **,
Qing Zhao,
Regina Garcia-Mendez,
Kenneth J. Takeuchi,
Esther S. Takeuchi,
Amy C. Marschilok,
Lynden A. Archer
Abstract:
How surface chemistry influences reactions occurring thereupon has been a long-standing question of broad scientific and technological interest for centuries. Recently, it has re-emerged as a critical question in a subdiscipline of chemistry - electrochemistry at heterointerphases, where the answers have implications for both how, and in what forms, humanity stores the rising quantities of renewab…
▽ More
How surface chemistry influences reactions occurring thereupon has been a long-standing question of broad scientific and technological interest for centuries. Recently, it has re-emerged as a critical question in a subdiscipline of chemistry - electrochemistry at heterointerphases, where the answers have implications for both how, and in what forms, humanity stores the rising quantities of renewable electric power generated from solar and wind installations world-wide. Here we consider the relation between the surface chemistry at such interphases and the reversibility of electrochemical transformations at a rechargeable battery electrode. Conventional wisdom holds that stronger chemical interaction between the metal deposits and electrode promotes reversibility. We report instead that a moderate strength of chemical interaction between the deposit and the substrate, neither too weak nor too strong, enables highest reversibility and stability of the plating/strip** redox processes at a battery anode. Analogous to the empirical Sabatier principle for chemical heterogeneous catalysis, our finding arises from the confluence of competing processes - one driven by electrochemistry and the other by chemical alloying. Based on experimental evaluation of metal plating/strip** systems in battery anodes of contemporary interest, we show that such knowledge provides a powerful tool for designing key materials in highly reversible electrochemical energy storage technologies based on earth-abundant, low-cost metals.
△ Less
Submitted 25 September, 2022; v1 submitted 14 March, 2022;
originally announced March 2022.
-
Suppression of Electroconvective and Morphological Instabilities by an Imposed Cross Flow of the Electrolyte
Authors:
Gao** Li,
Alex Townsend,
Lynden A. Archer,
Donald L. Koch
Abstract:
Electroconvection and its coupling with a morphological instability are important in many applications, including electrodialysis, batteries and fuel cells. In this work, we study the effects of a two-dimensional channel flow on the electroconvective and morphological instabilities using two approaches. In the bulk analysis, we consider the instability of the electroneutral bulk region driven by a…
▽ More
Electroconvection and its coupling with a morphological instability are important in many applications, including electrodialysis, batteries and fuel cells. In this work, we study the effects of a two-dimensional channel flow on the electroconvective and morphological instabilities using two approaches. In the bulk analysis, we consider the instability of the electroneutral bulk region driven by a second kind electroosmosis slip velocity boundary condition and derive the asymptotic solutions for small and large wavenumbers. In the full analysis, we consider the entire region of the liquid electrolyte and use the ultraspherical spectral method to numerically solve the eigenvalue problems. Both studies show that the imposed flow significantly affects the electroconvective instability. The imposed flow generates a shielding effect by deforming the perturbed ion concentration field and hinders the ion transfer from low- to high- concentration regions which causes the instability. It fully suppresses the electroconvective instability at small wavenumbers and reduces the growth rate of the perturbations at large wavenumbers. The direct effect of the flow on the morphological instability is minor, while the suppression of the electroconvective instability may change the wavenumber of the most unstable mode of the coupled instabilities. For the electroconvective instability, the bulk analysis is qualitatively different from the full analysis at high wavenumbers. For the morphological instability, good agreement is found between the two studies at both small and large wavenumbers.
△ Less
Submitted 9 July, 2020;
originally announced July 2020.
-
Fabricating Multifunctional Nanoparticle Membranes by a Fast Layer-by-Layer Langmuir-Blodgett Process: Application in Lithium-sulfur Batteries
Authors:
Mun Sek Kim,
Lin Ma,
Snehashis Choudhury,
Surya S. Moganty,
Shuya Wei,
Lynden A. Archer
Abstract:
The Langmuir-Blodgett (LB) technique is a powerful, widely used method for preparing coatings of amphiphilic molecules at air/water interfaces with thickness control down to a single molecule. Here we report two new LB techniques designed to create ordered, multifunctional nanoparticle films on any non-reactive support. The methods utilize Marangoni stresses produced by surfactants at a fluid/soli…
▽ More
The Langmuir-Blodgett (LB) technique is a powerful, widely used method for preparing coatings of amphiphilic molecules at air/water interfaces with thickness control down to a single molecule. Here we report two new LB techniques designed to create ordered, multifunctional nanoparticle films on any non-reactive support. The methods utilize Marangoni stresses produced by surfactants at a fluid/solid/gas interface and self-assembly of nanoparticles to facilitate rapid creation of dense monolayers of multi-wall carbon nanotubes (MWCNT), metal-oxide nanoparticles, polymers, and combinations of these materials in a layer-by-layer configuration. Using the polyolefin separator in a lithium sulfur (Li-S) electrochemical cell as an example, we illustrate how the method can be used to create structured membranes for regulating mass and charge transport. We show that a layered MWCNT/SiO2/MWCNT nanomaterial created in a clip-like configuration, with gravimetric areal coverage of ~130 mg cm-2 and a thickness of ~3 micron, efficiently adsorbs dissolved lithium polysulfide (LiPS) species and efficiently reutilize them for improving Li-S battery performance.
△ Less
Submitted 14 April, 2016;
originally announced April 2016.
-
Stable artificial solid electrolyte interfaces for lithium batteries
Authors:
Lin Ma,
Mun Sek Kim,
Lynden A. Archer
Abstract:
A rechargeable lithium metal battery (LMB), which uses metallic lithium at the anode, is among the most promising technologies for next generation electrochemical energy storage devices due to its high energy density, particularly when Li is paired with energetic conversion cathodes such as sulfur, oxygen/air, and carbon dioxide. Practical LMBs in any of these designs remain elusive due to multipl…
▽ More
A rechargeable lithium metal battery (LMB), which uses metallic lithium at the anode, is among the most promising technologies for next generation electrochemical energy storage devices due to its high energy density, particularly when Li is paired with energetic conversion cathodes such as sulfur, oxygen/air, and carbon dioxide. Practical LMBs in any of these designs remain elusive due to multiple stubborn problems, including parasitic reactions of Li metal with liquid electrolytes, unstable/dendritic electrodeposition at the anode during cell recharge, and chemical reaction of dissolved cathode conversion products with the Li anode. The solid electrolyte interface (SEI) formed between lithium metal and liquid electrolytes plays a critical role in all of these processes. We report on the chemistry and interfacial properties of artificial SEI films created by in-situ reaction of a strong Lewis Acid AlI3 additive, Li metal, and aprotic liquid electrolytes. We find that these SEI films impart exceptional interfacial stability to a Li metal anode. We further show that the improvements come from at least three processes: (i) in-situ formation of Li-Al alloy, (ii) formation of a LiI salt layer on Li, and (iii) creation of a stable polymer thin film on the lithium metal anode.
△ Less
Submitted 14 April, 2016;
originally announced April 2016.