-
Quantification of spin-charge interconversion in highly resistive sputtered Bi$_x$Se$_{1-x}$ with non-local spin valves
Authors:
Isabel C. Arango,
Won Young Choi,
Van Tuong Pham,
Inge Groen,
Diogo C. Vaz,
Punyashloka Debashis,
Hai Li,
Mahendra DC,
Kaan Oguz,
Andrey Chuvilin,
Luis E. Hueso,
Ian A. Young,
Fèlix Casanova
Abstract:
The development of spin-orbitronic devices, such as magneto-electric spin-orbit logic devices, calls for materials with a high resistivity and a high spin-charge interconversion efficiency. One of the most promising candidates in this regard is sputtered Bi$_x$Se$_{1-x}$. Although there are several techniques to quantify spin-charge interconversion, to date reported values for sputtered Bi$_x$Se…
▽ More
The development of spin-orbitronic devices, such as magneto-electric spin-orbit logic devices, calls for materials with a high resistivity and a high spin-charge interconversion efficiency. One of the most promising candidates in this regard is sputtered Bi$_x$Se$_{1-x}$. Although there are several techniques to quantify spin-charge interconversion, to date reported values for sputtered Bi$_x$Se$_{1-x}$ have often been overestimated due to spurious effects related to local currents combined with a lack of understanding of the effect of the interfaces and the use of approximations for unknown parameters, such as the spin diffusion length. In the present study, non-local spin valves are used to inject pure spin currents into Bi$_x$Se$_{1-x}$, allowing us to directly obtain its spin diffusion length as well as its spin Hall angle, from 10 K up to 300 K. These values, which are more accurate than those previously reported in sputtered Bi$_x$Se$_{1-x}$, evidence that the efficiency of this material is not exceptional. Indeed, the figure of merit for spin-charge interconversion, given by the product of these two parameters, is slightly under 1 nm. Our work demonstrates the importance of considering all material parameters and interfaces when quantifying the spin transport properties of materials with strong spin-orbit coupling.
△ Less
Submitted 6 November, 2023;
originally announced November 2023.
-
Voltage-based magnetization switching and reading in magnetoelectric spin-orbit nanodevices
Authors:
Diogo C. Vaz,
Chia-Ching Lin,
John J. Plombon,
Won Young Choi,
Inge Groen,
Isabel C. Arango,
Andrey Chuvilin,
Luis E. Hueso,
Dmitri E. Nikonov,
Hai Li,
Punyashloka Debashis,
Scott B. Clendenning,
Tanay A. Gosavi,
Yen-Lin Huang,
Bhagwati Prasad,
Ramamoorthy Ramesh,
Aymeric Vecchiola,
Manuel Bibes,
Karim Bouzehouane,
Stephane Fusil,
Vincent Garcia,
Ian A. Young,
Fèlix Casanova
Abstract:
With the deceleration of dimensional and voltage scaling in CMOS technologies, the demand for novel logic devices has never been greater. While spin-based devices present a major opportunity towards favorable scaling, switching energies are still orders of magnitude above the expected values. Alternatively, magnetoelectric materials are predicted to enable low-power control of magnetization, a rel…
▽ More
With the deceleration of dimensional and voltage scaling in CMOS technologies, the demand for novel logic devices has never been greater. While spin-based devices present a major opportunity towards favorable scaling, switching energies are still orders of magnitude above the expected values. Alternatively, magnetoelectric materials are predicted to enable low-power control of magnetization, a relatively unexplored pathway with sparse results at a device level. Here, we demonstrate voltage-based magnetization switching and reading in nanodevices at room temperature, enabled by exchange coupling between multiferroic BiFeO$_3$ and ferromagnetic CoFe, for the writing, and spin-to-charge current conversion between CoFe and Pt, for the reading. Unlike other current-based spintronic devices, magnetization writing is driven solely by voltage pulses. We show that, upon electrical switching of the BiFeO$_3$, the magnetization of the CoFe can be reversed, giving rise to different voltage outputs. The voltage-induced switching is supported through a combination of piezoresponse, magnetic force microscopy, and scanning nitrogen-vacancy magnetometry, where magnetization reversal is linked with the polarization state and antiferromagnetic cycloid propagation direction in the BiFeO$_3$. This study constitutes the building block for magnetoelectric spin-orbit logic, as well as a new avenue for low-power beyond-CMOS technologies.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Spin-to-charge conversion by spin pum** in sputtered polycrystalline Bi$_x$Se$_{1-x}$
Authors:
Isabel C Arango,
Alberto Anadón,
Silvestre Novoa,
Van Tuong Pham,
Won Young Choi,
Junior Alegre,
Laurent Badie,
Andrey Chuvilin,
Sébastien Petit-Watelot,
Luis E Hueso,
Fèlix Casanova,
Juan-Carlos Rojas-Sánchez
Abstract:
Topological materials are of high interest due to the promise to obtain low power and fast memory devices based on efficient spin-orbit torque switching or spin-orbit magnetic state read-out. In particular, sputtered polycrystalline Bi$_x$Se$_{1-x}$ is one of the materials with more potential for this purpose since it is relatively easy to fabricate and has been reported to have a very high spin H…
▽ More
Topological materials are of high interest due to the promise to obtain low power and fast memory devices based on efficient spin-orbit torque switching or spin-orbit magnetic state read-out. In particular, sputtered polycrystalline Bi$_x$Se$_{1-x}$ is one of the materials with more potential for this purpose since it is relatively easy to fabricate and has been reported to have a very high spin Hall angle. We study the spin-to-charge conversion in Bi$_x$Se$_{1-x}$ using the spin pum** technique coming from the ferromagnetic resonance in a contiguous permalloy thin film. We put a special emphasis on the interfacial properties of the system. Our results show that the spin Hall angle of Bi$_x$Se$_{1-x}$ has an opposite sign to the one of Pt. The charge current arising from the spin-to-charge conversion is, in contrast, lower than Pt by more than one order of magnitude. We ascribe this to the interdiffusion of Bi$_x$Se$_{1-x}$ and permalloy and the changes in chemical composition produced by this effect, which is an intrinsic characteristic of the system and is not considered in many other studies.
△ Less
Submitted 16 June, 2023; v1 submitted 24 December, 2022;
originally announced December 2022.
-
Emergence of large spin-charge interconversion at an oxidized Cu/W interface
Authors:
Inge Groen,
Van Tuong Pham,
Stefan Ilić,
Won Young Choi,
Andrey Chuvilin,
Edurne Sagasta,
Diogo C. Vaz,
Isabel C. Arango,
Nerea Ontoso,
F. Sebastian Bergeret,
Luis E. Hueso,
Ilya V. Tokatly,
Fèlix Casanova
Abstract:
Spin-orbitronic devices can integrate memory and logic by exploiting spin-charge interconversion (SCI), which is optimized by design and materials selection. In these devices, such as the magnetoelectric spin-orbit (MESO) logic, interfaces are crucial elements as they can prohibit or promote spin flow in a device as well as possess spin-orbit coupling resulting in interfacial SCI. Here, we study t…
▽ More
Spin-orbitronic devices can integrate memory and logic by exploiting spin-charge interconversion (SCI), which is optimized by design and materials selection. In these devices, such as the magnetoelectric spin-orbit (MESO) logic, interfaces are crucial elements as they can prohibit or promote spin flow in a device as well as possess spin-orbit coupling resulting in interfacial SCI. Here, we study the origin of SCI in a Py/Cu/W lateral spin valve and quantify its efficiency. An exhaustive characterization of the interface between Cu and W electrodes uncovers the presence of an oxidized layer (WO$_x$). We determine that the SCI occurs at the Cu/WO$_x$ interface with a temperature-independent interfacial spin-loss conductance of $G_{||} \approx$ 20 $\times$ 10$^{13} Ω^{-1}m^{-2}$ and an interfacial spin-charge conductivity $σ_{SC}=-$1610 $Ω^{-1}cm^{-1}$ at 10 K ($-$830 $Ω^{-1}cm^{-1}$ at 300 K). This corresponds to an efficiency given by the inverse Edelstein length $λ_{IEE}=-$0.76 nm at 10 K ($-$0.4 nm at 300 K), which is remarkably larger than in metal/metal and metal/oxide interfaces and bulk heavy metals. The large SCI efficiency at such an oxidized interface is a promising candidate for the magnetic readout in MESO logic devices.
△ Less
Submitted 16 November, 2022;
originally announced November 2022.
-
All-electrical spin-to-charge conversion in sputtered Bi$_x$Se$_{1-x}$
Authors:
Won Young Choi,
Isabel C. Arango,
Van Tuong Pham,
Diogo C. Vaz,
Haozhe Yang,
Inge Groen,
Chia-Ching Lin,
Emily S. Kabir,
Kaan Oguz,
Punyashloka Debashis,
John J. Plombon,
Hai Li,
Dmitri E. Nikonov,
Andrey Chuvilin,
Luis E. Hueso,
Ian A. Young,
Fèlix Casanova
Abstract:
One of the major obstacles to realizing spintronic devices such as MESO logic devices is the small signal magnitude used for magnetization readout, making it important to find materials with high spin-to-charge conversion efficiency. Although intermixing at the junction of two materials is a widely occurring phenomenon, its influence on material characterization and the estimation of spin-to-charg…
▽ More
One of the major obstacles to realizing spintronic devices such as MESO logic devices is the small signal magnitude used for magnetization readout, making it important to find materials with high spin-to-charge conversion efficiency. Although intermixing at the junction of two materials is a widely occurring phenomenon, its influence on material characterization and the estimation of spin-to-charge conversion efficiencies is easily neglected or underestimated. Here, we demonstrate all electrical spin-to-charge conversion in Bi$_x$Se$_{1-x}$ nanodevices and show how the conversion efficiency can be overestimated by tens of times depending on the adjacent metal used as a contact. We attribute this to the intermixing-induced compositional change and the properties of a polycrystal that lead to drastic changes in resistivity and spin Hall angle. Strategies to improve the spin-to-charge conversion signal in similar structures for functional devices are discussed.
△ Less
Submitted 18 October, 2022;
originally announced October 2022.