Showing 1–50 of 74 results for author: Arakawa, Y

Topological Corner States in Bilayer and Trilayer Systems with Vertically Stacked Topologically Distinct Layers

Authors: Natsuko Ishida, Motohiko Ezawa, Guangtai Lu, Wenbo Lin, Yasutomo Ota, Yasuhiko Arakawa, Satoshi Iwamoto

Abstract: We investigate bilayer and trilayer systems composed of topologically distinct, vertically stacked layers based on the Benalcazar-Bernevig-Hughes model. We have identified a topological phase transition that significantly alters the number of the topological corner states in these systems. Additionally, we find that traditional nested Wilson loop analysis inaccurately classifies certain phases, le… ▽ More We investigate bilayer and trilayer systems composed of topologically distinct, vertically stacked layers based on the Benalcazar-Bernevig-Hughes model. We have identified a topological phase transition that significantly alters the number of the topological corner states in these systems. Additionally, we find that traditional nested Wilson loop analysis inaccurately classifies certain phases, leading us to evaluate multipole chiral numbers (MCNs) as a more appropriate topological invariant. This approach accurately identifies topological phases and the number of MCNs coincides with the number of corner modes, enhancing our understanding of topological insulators and opening avenues for further applications. △ Less

Submitted 13 June, 2024; originally announced June 2024.

Comments: 10 pages, 7 figures

Estimating Speech Duration by Measuring the Abdominal Movement Using a Barometric Sensor

Authors: Rintaro Katagiri, Yutaka Arakawa, Yugo Nakamura

Abstract: Measuring the amount of speech production in daily life is important for understanding communication in organizations and identifying mental disorders. However, measuring the amount of speech production can be problematic in terms of privacy. We observed the whole body condition during speech and noted that the abdomen strains during speech production.Therefore, we developed a less uncomfortable,… ▽ More Measuring the amount of speech production in daily life is important for understanding communication in organizations and identifying mental disorders. However, measuring the amount of speech production can be problematic in terms of privacy. We observed the whole body condition during speech and noted that the abdomen strains during speech production.Therefore, we developed a less uncomfortable, inflatable abdominal motion measurement device using a barometric sensor to measure speech production indirectly. We measured speech production in 10 subjects and created a speech discrimination model using machine learning. However, the estimated speech duration in an actual meeting using this model was much longer than the actual duration. We found that the wearer's posture significantly affects the accuracy of the speech discrimination model developed in this study. We plan to improve the abdominal motion measurement device to minimize the effect of posture and achieve more accurate speech production measurement. △ Less

Submitted 10 May, 2024; originally announced May 2024.

Comments: 6pages, 2tables, 6figures

ACM Class: C.5

Dynamics characterization of the glass formation of twist-bend liquid crystal dimers through dielectric studies

Authors: M. Czarnecka, Y. Arakawa, A. Kocot, K. Merkel

Abstract: Broadband dielectric spectroscopy was used to study the molecular orientational dynamics of the glass-forming, thioether-linked cyanobiphenyl liquid crystal dimers. As was expected theoretically, two different relaxation processes that contributed to the dielectric permittivity of dimers were observed. The low-frequency relaxation mode, m1, was attributed to an end-over-end rotation of the dipolar… ▽ More Broadband dielectric spectroscopy was used to study the molecular orientational dynamics of the glass-forming, thioether-linked cyanobiphenyl liquid crystal dimers. As was expected theoretically, two different relaxation processes that contributed to the dielectric permittivity of dimers were observed. The low-frequency relaxation mode, m1, was attributed to an end-over-end rotation of the dipolar groups parallel to the director. The high-frequency relaxation mode, m2, was associated with the precessional motions of the dipolar groups around the director. The relaxation times for both modes were analyzed over a wide temperature range down to near the glass transition temperature. The different analytic functions used to characterize the temperature dependence of the relaxation times of the two modes are discussed. Notably, the critical-like description via the dynamic scaling model gave good numerical fittings and a consistent physical picture of the orientational dynamics on approaching the glass transition. Compared to the IR spectroscopy finding, in the higher temperature region of the twist-bend phase, where the longitudinal correlations of dipoles grew, the m1 mode experienced a sudden increase in enthalpy. At the same time, m2 changed continuously, which is described by the critical mode coupling behavior. Both types of molecular motion appear to strongly cooperate at a low-temperature range of the twist-bend phase but change in a coordinated manner as the temperature of the material approaches the glass transition point. As was expected, it was found that both molecular motions determined the glass dynamics at the same glass transition temperature. △ Less

Submitted 16 April, 2023; originally announced April 2023.

Comments: 19 pages, 4 figures, 4 tables

History-dependent nano-photoisomerization by optical near-field in photochromic single crystals

Authors: Yuji Arakawa, Kazuharu Uchiyama, Kingo Uchida, Makoto Naruse, Hirokazu Hori

Abstract: We demonstrate history-dependent or dynamic nano-photoisomerization by sequential formation of multiple memory pathways in photochromic crystals via optical near-field interactions. We observed the incident photons passing through the photoisomerization memory pathways by a double-probe optical near-field microscope, with one probe located on the front surface for local excitation and the other on… ▽ More We demonstrate history-dependent or dynamic nano-photoisomerization by sequential formation of multiple memory pathways in photochromic crystals via optical near-field interactions. We observed the incident photons passing through the photoisomerization memory pathways by a double-probe optical near-field microscope, with one probe located on the front surface for local excitation and the other on the rear surface for near-field observation. By carrying out localized near-field excitation twice but at spatially different positions, we observed negatively correlated near-field output patterns between the first memory pathway and the second memory pathway. That is, the added memory pathway was formed exclusively to the previously formed memory pathway. We also confirmed that the first memory pathway was preserved after the second memory pathway was formed. This result indicates that photoisomerization by an optical near-field in diarylethene crystals has a history dependence, leading to brain-like dynamic information memorization using light-matter interactions on the nanometer-scale. △ Less

Submitted 8 August, 2022; originally announced August 2022.

Optical Properties of Chiral Three-Dimensional Photonic Crystals made from Semiconductors

Authors: Shun Takahashi, Takeyoshi Tajiri, Yasuhiko Arakawa, Satoshi Iwamoto, Willem L. Vos

Abstract: We perform a theoretical and numerical study of the optical properties of both direct and inverse three-dimensional (3D) chiral woodpile structures, and a corresponding chiral Bragg stack. We compute transmission spectra in the helical direction for finite crystals, and photonic band structures, where we ensure the effective index of all structures to be the same. We find that both 3D structures s… ▽ More We perform a theoretical and numerical study of the optical properties of both direct and inverse three-dimensional (3D) chiral woodpile structures, and a corresponding chiral Bragg stack. We compute transmission spectra in the helical direction for finite crystals, and photonic band structures, where we ensure the effective index of all structures to be the same. We find that both 3D structures show dual-band circular dichroism, where light with a particular circular polarization state - either left- or right-handed - reveals a broad stop band with major attenuation, whereas the other polarization state is transmitted nearly unimpeded. We observe such gaps in different frequency ranges, with alternating handedness. The appearance of the circular-polarized gaps is successfully interpreted with a physical model wherein the circular polarization either co-rotates or counter-rotates with the chiral structure, thereby effectively leading to a spatially-dependent or a constant refractive index, and thus to the presence or absence of a gap. We find that the presence or absence of circularly polarized gaps is tuned by the transverse periods perpendicular to the chiral axis in both the 3D direct and inverse chiral woodpile crystal structures. The tunability of circular dichroism may find applications as on-chip sensors for circularly polarized light and in the on-chip detection of chiral molecules. △ Less

Submitted 14 July, 2022; originally announced July 2022.

Comments: 10 pages, 9 figures

Journal ref: Phys. Rev. B 107, 165307: 1-10 (2023)

Study of the experimental and simulated vibrational spectra together with conformational analysis for thioether cyanobiphenyl-based liquid crystal dimers

Authors: Barbara Loska, Antoni Kocot, Yuki Arakawa, G. H. Mehl, Katarzyna Merkel

Abstract: Infrared spectroscopy (IR) and quantum chemistry calculations that are based on the density functional theory (DFT) have been used to study the structure, molecular interactions of the nematic and twist-bend phases for thioether-linked dimers. Infrared absorbance measurements were conducted in a polarized beam for a homogeneously aligned sample in order to obtain more details about the orientation… ▽ More Infrared spectroscopy (IR) and quantum chemistry calculations that are based on the density functional theory (DFT) have been used to study the structure, molecular interactions of the nematic and twist-bend phases for thioether-linked dimers. Infrared absorbance measurements were conducted in a polarized beam for a homogeneously aligned sample in order to obtain more details about the orientation of the vibrational transition dipole moments. The distributions to investigate the structure and conformation of the molecule dihedral angle were calculated. The calculated spectrum was compared with the experimental infrared spectra and as a result, detailed vibrational assignments are reported. △ Less

Submitted 15 June, 2022; originally announced June 2022.

Comments: 25 pages, 5 figures, 2 tables

Increased intermolecular interactions and cluster formation at the onset of the twist-bend nematic phase in thioether cyanobiphenyl-based liquid crystal dimers

Authors: Katarzyna Merkel, Barbara Loska, Yuki Arakawa, Georg H. Mehl, Jakub Karcz, Antoni Kocot

Abstract: Infrared spectroscopy (IR) and quantum chemistry calculations, based on density functional theory (DFT) were used to study the structure and the molecular interactions in the nematic (N) and twist-bend (NTB) phases of thioether-linked dimers. Infrared absorbance measurements were conducted in a polarized beam for homogeneously aligned samples to measure and understand the orientation of the vibrat… ▽ More Infrared spectroscopy (IR) and quantum chemistry calculations, based on density functional theory (DFT) were used to study the structure and the molecular interactions in the nematic (N) and twist-bend (NTB) phases of thioether-linked dimers. Infrared absorbance measurements were conducted in a polarized beam for homogeneously aligned samples to measure and understand the orientation of the vibrational transition dipole moments in the liquid crystal states. Revealing temperature-dependent changes in the mean IR absorbance in the twist-bend nematic phase were observed. In the transition from the N to the NTB phase, is was found to be associated with a decrease in absorbance for the longitudinal dipoles. This is a result of the antiparallel axial interactions of the dipoles, while the absorbance of the transverse dipoles remained unchanged up to 340 K and then increased and the dipoles correlated in parallel. In order to account for the molecular arrangement in the nematic phase, DFT calculations were conducted for the system nearest to the lateral neighborhoods. Changes in the square of transition dipoles were found to be quite similar to the mean absorbance that was observed in the IR spectra. Interactions of molecules that were dominated by pair formation was observed as well as a shift of the long axes of the molecules relative to each other. The most important observation from the spectroscopic measurements was the sudden increase in the intermolecular interactions as the temperature decreased from the N to the NTB phase. This was evidenced by a significant increase in the correlation of the dipoles that were induced in the dimer cores. △ Less

Submitted 15 June, 2022; originally announced June 2022.

Comments: 29 pages, 7 figures, 2 tables

Coherent interaction of a-few-electron quantum dot with a terahertz optical resonator

Authors: Kazuyuki Kuroyama, **kwan Kwoen, Yasuhiko Arakawa, Kazuhiko Hirakawa

Abstract: We have investigated light-matter hybrid excitations in a quantum dot (QD)-terahertz (THz) optical resonator coupled system. We fabricate a gate-defined QD in the vicinity of a THz split-ring resonator (SRR) by using a AlGaAs/GaAs two-dimensional electron system (2DES). By illuminating the system with THz radiation, the QD shows a current change whose spectrum exhibits coherent coupling between th… ▽ More We have investigated light-matter hybrid excitations in a quantum dot (QD)-terahertz (THz) optical resonator coupled system. We fabricate a gate-defined QD in the vicinity of a THz split-ring resonator (SRR) by using a AlGaAs/GaAs two-dimensional electron system (2DES). By illuminating the system with THz radiation, the QD shows a current change whose spectrum exhibits coherent coupling between the electrons in the QD and the SRR as well as coupling between the 2DES and the SRR. The latter coupling enters the ultrastrong coupling regime and the coupling between the QD and the SRR is also very close to the ultrastrong coupling regime, despite the fact that only a few electrons reside in the QD. △ Less

Submitted 9 March, 2023; v1 submitted 22 April, 2022; originally announced April 2022.

ZEL: Net-Zero-Energy Lifelogging System using Heterogeneous Energy Harvesters

Authors: Mitsuru Arita, Yugo Nakamura, Shigemi Ishida, Yutaka Arakawa

Abstract: We present ZEL, the first net-zero-energy lifelogging system that allows office workers to collect semi-permanent records of when, where, and what activities they perform on company premises. ZEL achieves high accuracy lifelogging by using heterogeneous energy harvesters with different characteristics. The system is based on a 192-gram nametag-shaped wearable device worn by each employee that is e… ▽ More We present ZEL, the first net-zero-energy lifelogging system that allows office workers to collect semi-permanent records of when, where, and what activities they perform on company premises. ZEL achieves high accuracy lifelogging by using heterogeneous energy harvesters with different characteristics. The system is based on a 192-gram nametag-shaped wearable device worn by each employee that is equipped with two comparators to enable seamless switching between system states, thereby minimizing the battery usage and enabling net-zero-energy, semi-permanent data collection. To demonstrate the effectiveness of our system, we conducted data collection experiments with 11 participants in a practical environment and found that the person-dependent (PD) model achieves an 8-place recognition accuracy level of 87.2% (weighted F-measure) and a static/dynamic activities recognition accuracy level of 93.1% (weighted F-measure). Additional testing confirmed the practical long-term operability of the system and showed it could achieve a zero-energy operation rate of 99.6% i.e., net-zero-energy operation. △ Less

Submitted 1 February, 2022; originally announced February 2022.

Comments: 8 pages, 8 figures, Accepted to IEEE PerCom 2022

Topologically-protected single-photon sources with topological slow light photonic crystal waveguides

Authors: Kazuhiro Kuruma, Hironobu Yoshimi, Yasutomo Ota, Ryota Katsumi, Masahiro Kakuda, Yasuhiko Arakawa, Satoshi Iwamoto

Abstract: Slow light waveguides are advantageous for implementing high-performance single-photon sources required for scalable operation of integrated quantum photonic circuits (IQPCs), though such waveguides are known to suffer from propagation loss due to backscattering. A way to overcome the drawback is to use topological photonics, in which robust waveguiding in topologically-protected optical modes has… ▽ More Slow light waveguides are advantageous for implementing high-performance single-photon sources required for scalable operation of integrated quantum photonic circuits (IQPCs), though such waveguides are known to suffer from propagation loss due to backscattering. A way to overcome the drawback is to use topological photonics, in which robust waveguiding in topologically-protected optical modes has recently been demonstrated. Here, we report single-photon sources using single quantum dots (QDs) embedded in topological slow light waveguides based on valley photonic crystals. We observe Purcell-enhanced single-photon emission from a QD into a topological slow light mode with a group index over 20 and its robust propagation even under the presence of sharp bends. These results pave the way for the realization of robust and high-performance single-photon sources indispensable for IQPCs. △ Less

Submitted 16 July, 2022; v1 submitted 19 December, 2021; originally announced December 2021.

Journal ref: Laser Photon. Rev. 2200077 (2022)

A large-scale single-mode array laser based on a topological edge mode

Authors: Natsuko Ishida, Yasutomo Ota, Wenbo Lin, Tim Byrnes, Yasuhiko Arakawa, Satoshi Iwamoto

Abstract: Topological lasers have been intensively investigated as a strong candidate for robust single-mode lasers. A typical topological laser employs a single-mode topological edge state, which appears deterministically in a designed topological bandgap and exhibits robustness to disorder. These properties seem to be highly attractive in pursuit of high power lasers capable of single mode operation. In t… ▽ More Topological lasers have been intensively investigated as a strong candidate for robust single-mode lasers. A typical topological laser employs a single-mode topological edge state, which appears deterministically in a designed topological bandgap and exhibits robustness to disorder. These properties seem to be highly attractive in pursuit of high power lasers capable of single mode operation. In this paper, we theoretically analyze a large-scale single-mode laser based on a topological edge state. We consider a sizable array laser consisting of a few hundreds of site resonators, which support a single topological edge mode broadly distributed among the resonators. We build a basic model describing the laser using the tight binding approximation and evaluate the stability of single mode lasing based on the threshold gain difference $Δα$ between the first-lasing edge mode and the second-lasing competing bulk mode. Our calculations demonstrate that stronger couplings between the cavities and lower losses are advantageous for achieving stable operation of the device. When assuming an average coupling of 100 cm$^{-1}$ between site resonators and other realistic parameters, the threshold gain difference $Δα$ can reach about 2 cm$^{-1}$, which would be sufficient for stable single mode lasing using a conventional semiconductor laser architecture. We also consider the effects of possible disorders and long-range interactions to assess the robustness of the laser under non-ideal situations. These results lay the groundwork for develo** single-mode high-power topological lasers. △ Less

Submitted 15 March, 2022; v1 submitted 26 August, 2021; originally announced August 2021.

Comments: 17 pages, 7 figures

Unidirectional output from a quantum-dot single-photon source hybrid integrated on silicon

Authors: Ryota Katsumi, Yasutomo Ota, Takeyoshi Tajiri, Masahiro Kakuda, Satoshi Iwamoto, Hidefumi Akiyama, Yasuhiko Arakawa

Abstract: We report a quantum-dot single-photon source (QD SPS) hybrid integrated on a silicon waveguide embedding a photonic crystal mirror, which reflects photons and enables efficient unidirectional output from the waveguide. The silicon waveguide is constituted of a subwavelength grating so as to maintain the high efficiency even under the presence of stacking misalignment accompanied by hybrid integrat… ▽ More We report a quantum-dot single-photon source (QD SPS) hybrid integrated on a silicon waveguide embedding a photonic crystal mirror, which reflects photons and enables efficient unidirectional output from the waveguide. The silicon waveguide is constituted of a subwavelength grating so as to maintain the high efficiency even under the presence of stacking misalignment accompanied by hybrid integration processes. Experimentally, we assembled the hybrid photonic structure by transfer printing, and demonstrated single-photon generation from a QD and its unidirectional output from the waveguide. These results point out a promising approach toward scalable integration of SPSs on silicon quantum photonics platforms. △ Less

Submitted 10 August, 2021; originally announced August 2021.

Comments: 17 pages, 5 figures

Chiral modes near exceptional points in symmetry broken H1 photonic crystal cavities

Authors: C. F. Fong, Y. Ota, Y. Arakawa, S. Iwamoto, Y. K. Kato

Abstract: The H1 photonic crystal cavity supports two degenerate dipole modes of orthogonal linear polarization which could give rise to circularly polarized fields when driven with a $π$/$2$ phase difference. However, fabrication errors tend to break the symmetry of the cavity which lifts the degeneracy of the modes, rendering the cavity unsuitable for supporting circular polarization. We demonstrate numer… ▽ More The H1 photonic crystal cavity supports two degenerate dipole modes of orthogonal linear polarization which could give rise to circularly polarized fields when driven with a $π$/$2$ phase difference. However, fabrication errors tend to break the symmetry of the cavity which lifts the degeneracy of the modes, rendering the cavity unsuitable for supporting circular polarization. We demonstrate numerically, a scheme that induces chirality in the cavity modes, thereby achieving a cavity that supports intrinsic circular polarization. By selectively modifying two air holes around the cavity, the dipole modes could interact via asymmetric coherent backscattering which is a non-Hermitian process. With suitable air hole parameters, the cavity modes approach the exceptional point, coalescing in frequencies and linewidths as well as giving rise to significant circular polarization close to unity. The handedness of the chirality can be selected depending on the choice of the modified air holes. Our results highlight the prospect of using the H1 photonic crystal cavity for chiral-light matter coupling in applications such as valleytronics, spin-photon interfaces and the generation of single photons with well-defined spins. △ Less

Submitted 30 July, 2021; originally announced July 2021.

Comments: 25 pages, 9 figures

Journal ref: Phys. Rev. Research 3, 043096 (2021)

Experimental demonstration of topological slow light waveguides in valley photonic crystals

Authors: Hironobu Yoshimi, Takuto Yamaguchi, Ryota Katsumi, Yasutomo Ota, Yasuhiko Arakawa, Satoshi Iwamoto

Abstract: We experimentally demonstrate topological slow light waveguides in valley photonic crystals (VPhCs). We employed a bearded interface formed between two topologically-distinct VPhCs patterned in an air-bridged silicon slab. The interface supports both topological and non-topological slow light modes below the light line. By means of optical microscopy, we observed light propagation in the topologic… ▽ More We experimentally demonstrate topological slow light waveguides in valley photonic crystals (VPhCs). We employed a bearded interface formed between two topologically-distinct VPhCs patterned in an air-bridged silicon slab. The interface supports both topological and non-topological slow light modes below the light line. By means of optical microscopy, we observed light propagation in the topological mode in the slow light regime with a group index $n_{\rm g}$ over $30$. Furthermore, we confirmed light transmission via the slow light mode even under the presence of sharp waveguide bends. In comparison between the topological and non-topological modes, we found that the topological mode exhibits much more efficient waveguiding than the trivial one, elucidating topological protection in the slow light regime. This work paves the way for exploring topological slow-light devices compatible with existing photonics technologies. △ Less

Submitted 18 February, 2021; originally announced February 2021.

ParmoSense: A Scenario-based Participatory Mobile Urban Sensing Platform with User Motivation Engine

Authors: Yuki Matsuda, Shogo Kawanaka, Hirohiko Suwa, Yutaka Arakawa, Keiichi Yasumoto

Abstract: Rapid proliferation of mobile devices with various sensors have enabled Participatory Mobile Sensing (PMS). Several PMS platforms provide multiple functions for various sensing purposes, but they are suffering from the open issues: limited use of their functions for a specific scenario/case and requiring technical knowledge for organizers. In this paper, we propose a novel PMS platform named Parmo… ▽ More Rapid proliferation of mobile devices with various sensors have enabled Participatory Mobile Sensing (PMS). Several PMS platforms provide multiple functions for various sensing purposes, but they are suffering from the open issues: limited use of their functions for a specific scenario/case and requiring technical knowledge for organizers. In this paper, we propose a novel PMS platform named ParmoSense for easily and flexibly collecting urban environmental information. To reduce the burden on both organizers and participants, in ParmoSense, we employ two novel features: modularization of functions and scenario-based PMS system description. For modularization, we provide the essential PMS functions as modules which can be easily chosen and combined for sensing in different scenarios. The scenario-based description feature allows organizers to easily and quickly set up a new participatory sensing instance and participants to easily install the corresponding scenario and participate in the sensing. Moreover, ParmoSense provides GUI tools as well for creating and distributing PMS system easily, editing and visualizing collected data quickly. It also provides multiple functions for encouraging participants' motivation for sustainable operation of the system. Through performance comparison with existing PMS platforms, we confirmed ParmoSense shows the best cost-performance in the perspective of the workload for preparing PMS system and varieties of functions. In addition, to evaluate the availability and usability of ParmoSense, we conducted 19 case studies, which have different locations, scales, and purposes, over 4 years with cooperation from ordinary citizens. Through the case studies and the questionnaire survey for participants and organizers, we confirmed that ParmoSense can be easily operated and participated by ordinary citizens including non-technical persons. △ Less

Submitted 10 February, 2021; originally announced February 2021.

Comments: 24 pages, 9 figures

MSC Class: 68M18 ACM Class: H.4

Journal ref: Sensors and Materials, Vol.34, No.8, pp.3063-3091, 2022

Microcavity-based Generation of Full Poincaré Beams with Arbitrary Skyrmion Numbers

Authors: Wenbo Lin, Yasutomo Ota, Yasuhiko Arakawa, Satoshi Iwamoto

Abstract: A full Poincaré (FP) beam possesses all possible optical spin states in its cross-section, which constitutes an optical analogue of a skyrmion. Until now, FP beams have been exclusively generated using bulk optics. Here, we propose a generation scheme of an FP beam based on an optical microring cavity. We position two different angular gratings along with chiral lines on a microring cavity and gen… ▽ More A full Poincaré (FP) beam possesses all possible optical spin states in its cross-section, which constitutes an optical analogue of a skyrmion. Until now, FP beams have been exclusively generated using bulk optics. Here, we propose a generation scheme of an FP beam based on an optical microring cavity. We position two different angular gratings along with chiral lines on a microring cavity and generate an FP beam as a superposition of two light beams with controlled spin and orbital angular momenta. We numerically show that FP beams with tailored skyrmion numbers can be generated from this device, opening a route for develo** compact light sources with unique optical spin fields. △ Less

Submitted 27 June, 2020; originally announced June 2020.

Journal ref: Phys. Rev. Research 3, 023055 (2021)

Strong coupling between a single quantum dot and an L4/3 photonic crystal nanocavity

Authors: Kazuhiro Kuruma, Yasutomo Ota, Masahiro Kakuda, Satoshi Iwamoto, Yasuhiko Arakawa

Abstract: We demonstrate strong coupling between a single quantum dot and a GaAs-based L4/3-type photonic crystal nanocavity. The L4/3 cavity supports a high theoretical Q factor (~8{\times}10^6), a small mode volume (~0.32 (λ/n)^3), and an electric field distribution with the maximum electric field lying within the host dielectric material, which facilitates strong coupling with a quantum dot. We fabricate… ▽ More We demonstrate strong coupling between a single quantum dot and a GaAs-based L4/3-type photonic crystal nanocavity. The L4/3 cavity supports a high theoretical Q factor (~8{\times}10^6), a small mode volume (~0.32 (λ/n)^3), and an electric field distribution with the maximum electric field lying within the host dielectric material, which facilitates strong coupling with a quantum dot. We fabricated L4/3 cavities and observed a high Q factor over 80,000 using photoluminescence measurement. We confirmed strong coupling between a single quantum dot and an L4/3 cavity with a Q factor of 33,000 by observing a clear anti-crossing in the spectra. △ Less

Submitted 30 July, 2020; v1 submitted 10 June, 2020; originally announced June 2020.

Journal ref: Appl. Phys. Express 13, 82009 (2020)

Reflectivity of Finite 3D GaAs Photonic Band Gap Crystals

Authors: Takeyoshi Tajiri, Shun Takahashi, Cornelis A. M. Harteveld, Yasuhiko Arakawa, Satoshi Iwamoto, Willem L. Vos

Abstract: We study the optical reflectivity of three-dimensional (3D) photonic band gap crystals with increasing thickness. The crystals consist of GaAs plates with nanorod arrays that are assembled by an advanced stacking method into high-quality 3D woodpile structures. We observe intense and broad reflectivity peak with stop bands that correspond to a broad gap in the photonic band structures. The maximum… ▽ More We study the optical reflectivity of three-dimensional (3D) photonic band gap crystals with increasing thickness. The crystals consist of GaAs plates with nanorod arrays that are assembled by an advanced stacking method into high-quality 3D woodpile structures. We observe intense and broad reflectivity peak with stop bands that correspond to a broad gap in the photonic band structures. The maximum reflectivity quickly reaches high values even for a few crystal layers. Remarkably, the bandwidth of the stop bands hardly decreases with increasing crystal thickness, in good agreement with FDTD simulations. This behavior differs remarkably from the large changes observed earlier in weakly interacting 3D photonic crystals. The nearly constant bandwidth and high reflectivity are rationalized by multiple Bragg interference that occurs in strongly interacting photonic band gap crystals, whereby the incident light scatters from multiple reciprocal lattice vectors simultaneously, in particular from oblique ones that are parallel to a longer crystal dimension and thus experience hardly any finite size effects. Our new insights have favorable consequences for the application of 3D photonic band gap crystals, notably since even thin structures reveal the full band gap functionality, including devices that shield quantum bits from vacuum fluctuations. △ Less

Submitted 17 January, 2020; originally announced January 2020.

Comments: 10 pages, 7 figures

Journal ref: Phys. Rev. B 101, 235303 (2020)

Surface-passivated high-Q GaAs photonic crystal nanocavity with quantum dots

Authors: Kazuhiro Kuruma, Yasutomo Ota, Masahiro Kakuda, Satoshi Iwamoto, Yasuhiko Arakawa

Abstract: Photonic crystal (PhC) nanocavities with high quality (Q) factors have attracted much attention because of their strong spatial and temporal light confinement capability. The resulting enhanced light-matter interactions are beneficial for diverse photonic applications, ranging from on-chip optical communications to sensing. However, currently achievable Q factors for active PhC nanocavities, which… ▽ More Photonic crystal (PhC) nanocavities with high quality (Q) factors have attracted much attention because of their strong spatial and temporal light confinement capability. The resulting enhanced light-matter interactions are beneficial for diverse photonic applications, ranging from on-chip optical communications to sensing. However, currently achievable Q factors for active PhC nanocavities, which embed active emitters inside, are much lower than those of the passive structures because of large optical loss, presumably originating from light scattering by structural imperfections and/or optical absorptions. Here, we demonstrate a significant improvement of Q factors up to ~160,000 in GaAs active PhC nanocavities using a sulfur-based surface passivation technique. This value is the highest ever reported for any active PhC nanocavities with semiconductor quantum dots. The surface-passivated cavities also exhibit reduced variation in both Q factors and cavity resonant wavelengths. We find that the improvement in the cavity performance presumably arises from suppressed light absorption at the surface of the PhC's host material by performing a set of PL measurements in spectral and time domains. With the surface passivation technique, we also demonstrate a strongly-coupled single quantum dot-cavity system based on a PhC nanocavity with a high Q factor of ~100,000. These results will pave the way for advanced quantum dot-based cavity quantum electrodynamics and for GaAs micro/nanophotonic applications containing active emitters. △ Less

Submitted 18 May, 2020; v1 submitted 26 December, 2019; originally announced January 2020.

Journal ref: APL Photonics 5, 046106 (2020)

Active topological photonics

Authors: Yasutomo Ota, Kenta Takata, Tomoki Ozawa, Alberto Amo, Zhetao Jia, Boubacar Kante, Masaya Notomi, Yasuhiko Arakawa, Satoshi Iwamoto

Abstract: Topological photonics has emerged as a novel route to engineer the flow of light. Topologically-protected photonic edge modes, which are supported at the perimeters of topologically-nontrivial insulating bulk structures, have been of particular interest as they may enable low-loss optical waveguides immune to structural disorder. Very recently, there is a sharp rise of interest in introducing gain… ▽ More Topological photonics has emerged as a novel route to engineer the flow of light. Topologically-protected photonic edge modes, which are supported at the perimeters of topologically-nontrivial insulating bulk structures, have been of particular interest as they may enable low-loss optical waveguides immune to structural disorder. Very recently, there is a sharp rise of interest in introducing gain materials into such topological photonic structures, primarily aiming at revolu-tionizing semiconductor lasers with the aid of physical mechanisms existing in topological physics. Examples of re-markable realizations are topological lasers with unidirectional light output under time-reversal symmetry breaking and topologically-protected polariton and micro/nano-cavity lasers. Moreover, the introduction of gain and loss provides a fascinating playground to explore novel topological phases, which are in close relevance to non-Hermitian and parity-time symmetric quantum physics and are in general difficult to access using fermionic condensed matter systems. Here, we review the cutting-edge research on active topological photonics, in which optical gain plays a pivotal role. We discuss recent realizations of topological lasers of various kinds, together with the underlying physics explaining the emergence of topological edge modes. In such demonstrations, the optical modes of the topological lasers are deter-mined by the dielectric structures and support lasing oscillation with the help of optical gain. We also address recent researches on topological photonic systems in which gain and loss themselves essentially influence on topological prop-erties of the bulk systems. We believe that active topological photonics provides powerful means to advance mi-cro/nanophotonics systems for diverse applications and topological physics itself as well. △ Less

Submitted 11 December, 2019; v1 submitted 11 December, 2019; originally announced December 2019.

Comments: 23 pages, 11 figures, review paper to appear in Nanophotonics

Journal ref: Nanophotonics 9, 547 (2020)

In-situ wavelength tuning of quantum-dot single-photon sources integrated on a CMOS silicon chip

Authors: Ryota Katsumi, Yasutomo Ota, Alto Osada, Takeyoshi Tajiri, Takuto Yamaguchi, Masahiro Kakuda, Satoshi Iwamoto, Hidefumi Akiyama, Yasuhiko Arakawa

Abstract: Silicon quantum photonics provides a promising pathway to realize large-scale quantum photonic integrated circuits (QPICs) by exploiting the power of complementary-metal-oxide-semiconductor (CMOS) technology. Toward scalable operation of such silicon-based QPICs, a straightforward approach is to integrate deterministic single-photon sources (SPSs). To this end, hybrid integration of deterministic… ▽ More Silicon quantum photonics provides a promising pathway to realize large-scale quantum photonic integrated circuits (QPICs) by exploiting the power of complementary-metal-oxide-semiconductor (CMOS) technology. Toward scalable operation of such silicon-based QPICs, a straightforward approach is to integrate deterministic single-photon sources (SPSs). To this end, hybrid integration of deterministic solid-state SPSs, such as those based on InAs/GaAs quantum dots (QDs), is highly promising. However, the spectral and spatial randomness inherent in the QDs pose a serious challenge for scalable implementation of multiple identical SPSs on a silicon CMOS chip. To overcome this challenge, we have been investigating a new hybrid integration technique called transfer printing, which is based on a pick-and-place operation and allows for the integration of desired QD SPSs on any locations on the silicon CMOS chips at will. Nevertheless, even in this scenario, in-situ fine tuning for perfect wavelength matching among the integrated QD SPSs will be required for interfering photons from the dissimilar sources. Here, we demonstrate in-situ wavelength tuning of QD SPSs integrated on a CMOS silicon chip. To thermally tune the emission wavelengths of the integrated QDs, we augmented the QD SPSs with optically driven heating pads. The integration of all the necessary elements was performed using transfer printing, which largely simplified the fabrication of the three-dimensional stack of micro/nanophotonic structures. We further demonstrate in-situ wavelength matching between two dissimilar QD sources integrated on the same silicon chip. Our transfer-printing-based approach will open the possibility for realizing large-scale QPICs that leverage CMOS technology. △ Less

Submitted 30 September, 2019; originally announced September 2019.

Comments: 14 pages, 4 figures

Identification of New Assembly Mode in the Heliconical Nematic Phase via Tender Resonant X-ray Scattering

Authors: Yu Cao, Jun Feng, Asritha Nallapaneni, Yuki Arakawa, Keqing Zhao, Georg H. Mehl, Feng Liu, Chenhui Zhu

Abstract: Helical structures are exciting and are utilized in numerous applications ranging from biotechnology to displays to medicine. Accurate description and understanding of resonance effects in helical structures provides crucial knowledge on molecular packing beyond positional ordering. We exam-ined the manifestation of resonance effects in a nematic phase with heliconical structure, the so called twi… ▽ More Helical structures are exciting and are utilized in numerous applications ranging from biotechnology to displays to medicine. Accurate description and understanding of resonance effects in helical structures provides crucial knowledge on molecular packing beyond positional ordering. We exam-ined the manifestation of resonance effects in a nematic phase with heliconical structure, the so called twist bend nematic (NTB) via tender resonant X-ray scattering (TReXS) at the sulfur K-edge. We demonstrate for the first time quantitatively that the energy dependence of the scattering peak in the NTB phase follows the energy dependence of the complex refractive indices measured by X-ray absorption. This allows us to identify a new self-assembly mode for specific sets of liquid crystal dimers in the NTB phase. We anticipate that new avenues in the exploration of complex orientational structures both in static as well as in dynamic modes induced by external stimuli will be pursued. △ Less

Submitted 1 February, 2020; v1 submitted 25 July, 2019; originally announced July 2019.

Comments: 30 pages total, including the main and supplemental

Single plasmon generation in an InAs/GaAs quantum dot in a transfer-printed plasmonic microring resonator

Authors: Akihito Tamada, Yasutomo Ota, Kazuhiro Kuruma, Katsuyuki Watanabe, Satoshi Iwamoto, Yasuhiko Arakawa

Abstract: We report single plasmon generation with a self-assembled InAs/GaAs quantum dot embedded in a plasmonic microring resonator. The plasmonic cavity based on a GaAs microring is defined on an atomically-smooth silver surface. We fabricated this structure with the help of transfer printing, which enables the pick-and-place assembly of the complicated, heterogeneous three dimensional stack. We show tha… ▽ More We report single plasmon generation with a self-assembled InAs/GaAs quantum dot embedded in a plasmonic microring resonator. The plasmonic cavity based on a GaAs microring is defined on an atomically-smooth silver surface. We fabricated this structure with the help of transfer printing, which enables the pick-and-place assembly of the complicated, heterogeneous three dimensional stack. We show that a high-order surface-plasmon-polariton transverse mode mediates efficient coupling between the InAs/GaAs quantum dots and the plasmonic cavity, paving the way for develo** plasmonic quantum light sources based on the state-of-the-art solid-state quantum emitters. Experimentally, we observed Purcell-enhanced radiation from the quantum dot coupled to the plasmonic mode. We also observed a strong anti-bunching in the intensity correlation histogram measured for scattered photons from the plasmonic resonator, indicating single plasmon generation in the resonator. Our results will be important in the development of quantum plasmonic circuits integrating high-performance single plasmon generators. △ Less

Submitted 14 April, 2019; v1 submitted 12 April, 2019; originally announced April 2019.

Comments: 6 pages, 4 figures. To appear in ACS photonics

GaAs valley photonic crystal waveguide with light-emitting InAs quantum dots

Authors: Takuto Yamaguchi, Yasutomo Ota, Ryota Katsumi, Katsuyuki Watanabe, Satomi Ishida, Alto Osada, Yasuhiko Arakawa, Satoshi Iwamoto

Abstract: We report a valley photonic crystal (VPhC) waveguide in a GaAs slab with InAs quantum dots (QDs) as an internal light source exploited for experimental characterization of the waveguide. A topological interface state formed at the interface between two topologically-distinct VPhCs is used as the waveguide mode. We demonstrate robust propagation for near-infrared light emitted from the QDs even und… ▽ More We report a valley photonic crystal (VPhC) waveguide in a GaAs slab with InAs quantum dots (QDs) as an internal light source exploited for experimental characterization of the waveguide. A topological interface state formed at the interface between two topologically-distinct VPhCs is used as the waveguide mode. We demonstrate robust propagation for near-infrared light emitted from the QDs even under the presence of sharp bends as a consequence of the topological protection of the guided mode. Our work will be of importance for develo** robust photonic integrated circuits with small footprints, as well as for exploring active semiconductor topological photonics. △ Less

Submitted 11 April, 2019; v1 submitted 4 April, 2019; originally announced April 2019.

Comments: 14 pages, 4 figures

Journal ref: Appl. Phys. Express 12, 062005 (2019)

EHAAS: Energy Harvesters As A Sensor for Place Recognition on Wearables

Authors: Yoshinori Umetsu, Yugo Nakamura, Yutaka Arakawa, Manato Fujimoto, Hirohiko Suwa

Abstract: A wearable based long-term lifelogging system is desirable for the purpose of reviewing and improving users' lifestyle habits. Energy harvesting (EH) is a promising means for realizing sustainable lifelogging. However, present EH technologies suffer from instability of the generated electricity caused by changes of environment, e.g., the output of a solar cell varies based on its material, light i… ▽ More A wearable based long-term lifelogging system is desirable for the purpose of reviewing and improving users' lifestyle habits. Energy harvesting (EH) is a promising means for realizing sustainable lifelogging. However, present EH technologies suffer from instability of the generated electricity caused by changes of environment, e.g., the output of a solar cell varies based on its material, light intensity, and light wavelength. In this paper, we leverage this instability of EH technologies for other purposes, in addition to its use as an energy source. Specifically, we propose to determine the variation of generated electricity as a sensor for recognizing "places" where the user visits, which is important information in the lifelogging system. First, we investigate the amount of generated electricity of selected energy harvesting elements in various environments. Second, we design a system called EHAAS (Energy Harvesters As A Sensor) where energy harvesting elements are used as a sensor. With EHAAS, we propose a place recognition method based on machine-learning and implement a prototype wearable system. Our prototype evaluation confirms that EHAAS achieves a place recognition accuracy of 88.5% F-value for nine different indoor and outdoor places. This result is better than the results of existing sensors (3-axis accelerometer and brightness). We also clarify that only two types of solar cells are required for recognizing a place with 86.2% accuracy. △ Less

Submitted 20 March, 2019; originally announced March 2019.

Comments: 10 pages, 11 figures, accepted for publication in The International Conference on Pervasive Computing and Communications (PerCom) 2019

Spin-dependent directional emission from an asymmetry optical waveguide with an embedded quantum dot ensemble

Authors: Wenbo Lin, Yasutomo Ota, Satoshi Iwamoto, Yasuhiko Arakawa

Abstract: In this study, we examine a photonic wire waveguide embedded with an ensemble of quantum dots that directionally emits into the waveguide depending on the spin state of the ensemble. This is accomplished through the aid of the spin-orbit interaction of light. The waveguide has a two-step stair-like cross section and embeds quantum dots (QDs) only in the upper step, such that the circular polarizat… ▽ More In this study, we examine a photonic wire waveguide embedded with an ensemble of quantum dots that directionally emits into the waveguide depending on the spin state of the ensemble. This is accomplished through the aid of the spin-orbit interaction of light. The waveguide has a two-step stair-like cross section and embeds quantum dots (QDs) only in the upper step, such that the circular polarization of emission from the spin-polarized QDs controls the direction of the radiation. We numerically verify that more than 70% of the radiation from the ensemble emitter is toward a specific direction in the waveguide. We also examine a microdisk resonator with a stair-like edge, that supports selective coupling of the QD ensemble radiation into a whispering galley mode rotating unidirectionally. Our study provides a foundation for spin-dependent optoelectronic devices. △ Less

Submitted 22 February, 2019; originally announced February 2019.

Design of GaAs-based valley phononic crystals with multiple complete phononic bandgaps at ultra-high frequency

Authors: Ingi Kim, Yasuhiko Arakawa, Satoshi Iwamoto

Abstract: We report the design of GaAs-based monolithic valley phononic crystals (VPnCs) with multiple complete phononic bandgaps, which support simultaneous valley-protected edge states with different symmetries in the gigahertz (GHz) range. Rotation of triangular holes in the unit cells breaks the mirror symmetry, and this orientation degree of freedom enables the structures to exhibit different valley vo… ▽ More We report the design of GaAs-based monolithic valley phononic crystals (VPnCs) with multiple complete phononic bandgaps, which support simultaneous valley-protected edge states with different symmetries in the gigahertz (GHz) range. Rotation of triangular holes in the unit cells breaks the mirror symmetry, and this orientation degree of freedom enables the structures to exhibit different valley vortex chiralities. We numerically demonstrate the transport of multi-band valley-protected edge states with suppressed backscattering at the sharp corners of the interfaces between different VPnCs. Such monolithic semiconductor structures pave the way for ultra-high frequency topological nanophononic applications by using the lithographic technique. △ Less

Submitted 5 January, 2019; originally announced January 2019.

Comments: 13 pages, 5 figures

Journal ref: Appl. Phys. Express 12 047001 (2019)

Quantum-dot single-photon source on a CMOS silicon photonic chip integrated using transfer printing

Authors: Ryota Katsumi, Yasutomo Ota, Alto Osada, Takuto Yamaguchi, Takeyoshi Tajiri, Masahiro Kakuda, Satoshi Iwamoto, Hidefumi Akiyama, Yasuhiko Arakawa

Abstract: Silicon photonics is a powerful platform for implementing large-scale photonic integrated circuits (PICs), because of its compatibility with mature complementary-metal-oxide-semiconductor (CMOS) technology. Exploiting silicon-based PICs for quantum photonic information processing (or the so-called silicon quantum photonics) provides a promising pathway for large-scale quantum applications. For the… ▽ More Silicon photonics is a powerful platform for implementing large-scale photonic integrated circuits (PICs), because of its compatibility with mature complementary-metal-oxide-semiconductor (CMOS) technology. Exploiting silicon-based PICs for quantum photonic information processing (or the so-called silicon quantum photonics) provides a promising pathway for large-scale quantum applications. For the development of scalable silicon quantum PICs, a major challenge is integrating on-silicon quantum light sources that deterministically emit single photons. In this regard, the use of epitaxial InAs/GaAs quantum dots (QDs) is a very promising approach, because of their capability of deterministic single-photon emission with high purity and indistinguishability. However, the required hybrid integration is inherently difficult and often lacks the compatibility with CMOS processes. Here, we demonstrate a QD single-photon source (SPS) integrated on a glass-clad silicon photonic waveguide processed by a CMOS foundry. Hybrid integration is performed using transfer printing, which enables us to integrate heterogeneous optical components in a simple pick-and-place manner and thus assemble them after the entire CMOS process is completed. We observe single-photon emission from the integrated QD and its efficient coupling into the silicon waveguide. Our transfer-printing-based approach is fully compatible with CMOS back-end processes, and thus will open the possibility for realizing large-scale quantum PICs that leverage CMOS technology. △ Less

Submitted 30 December, 2018; originally announced December 2018.

Comments: 15 pages, 5 figures

Photonic crystal nanocavity based on a topological corner state

Authors: Yasutomo Ota, Feng Liu, Ryota Katsumi, Katsuyuki Watanabe, Katsunori Wakabayashi, Yasuhiko Arakawa, Satoshi Iwamoto

Abstract: Topological phonics has emerged as a novel approach to engineer the flow of light and provides unprecedented means for develo** diverse photonic elements, including robust optical waveguides immune to structural imperfections. However, the development of nanoscale standing-wave cavities in topological photonics is rather slow, despite its importance when building densely-integrated photonic inte… ▽ More Topological phonics has emerged as a novel approach to engineer the flow of light and provides unprecedented means for develo** diverse photonic elements, including robust optical waveguides immune to structural imperfections. However, the development of nanoscale standing-wave cavities in topological photonics is rather slow, despite its importance when building densely-integrated photonic integrated circuits. In this Letter, we report a photonic crystal nanocavity based on a topological corner state, supported at a 90-degrees-angled rim of a two dimensional photonic crystal. A combination of the bulk-edge and edge-corner correspondences guarantees the presence of the higher-order topological state in a hierarchical manner. We experimentally observed a corner mode that is tightly localized in space while supporting a high Q factor over 2,000, verifying its promise as a nanocavity. These results cast new light on the way to introduce nanocavities in topological photonics platforms. △ Less

Submitted 25 December, 2018; originally announced December 2018.

Comments: 11 pages, 4 figures

Journal ref: Optica Vol. 6, Issue 6, pp. 786-789 (2019)

Strongly coupled single quantum dot-cavity system integrated on a CMOS-processed silicon photonic chip

Authors: Alto Osada, Yasutomo Ota, Ryota Katsumi, Masahiro Kakuda, Satoshi Iwamoto, Yasuhiko Arakawa

Abstract: Quantum photonic integrated circuit (QPIC) is a promising tool for constructing integrated devices for quantum technology applications. In the optical regime, silicon photonics empowered by complementary-metal-oxide-semiconductor (CMOS) technology provides optical components useful for realizing large-scale QPICs. Optical nonlinearity at the single-photon level is required for QPIC to facilitate p… ▽ More Quantum photonic integrated circuit (QPIC) is a promising tool for constructing integrated devices for quantum technology applications. In the optical regime, silicon photonics empowered by complementary-metal-oxide-semiconductor (CMOS) technology provides optical components useful for realizing large-scale QPICs. Optical nonlinearity at the single-photon level is required for QPIC to facilitate photon-photon interaction. However, to date, realization of optical elements with deterministic( i.e., not probabilistic) single-photon nonlinearity by using silicon-based components is challenging, despite the enhancement of the functionality of QPICs based on silicon photonics. In this study, we realize for the first time a strongly coupled InAs/GaAs quantum dot-cavity quantum electrodynamics (QED) system on a CMOS-processed silicon photonic chip. The heterogeneous integration of the GaAs cavity on the silicon chip is performed by transfer printing. The cavity QED system on the CMOS photonic chip realized in this work is a promising candidate for on-chip single-photon nonlinear element, which constitutes the fundamental component for future applications based on QPIC, such as, coherent manipulation and nondestructive measurement of qubit states via a cavity, and efficient single-photon filter and router. △ Less

Submitted 28 September, 2018; originally announced September 2018.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. Applied 11, 024071 (2019)

Optical coupling between atomically-thin black phosphorus and a two dimensional photonic crystal nanocavity

Authors: Yasutomo Ota, Rai Moriya, Naoto Yabuki, Miho Arai, Masahiro Kakuda, Satoshi Iwamoto, Tomoki Machida, Yasuhiko Arakawa

Abstract: Atomically-thin black phosphorus (BP) is an emerging two dimensional (2D) material exhibiting bright photoluminescence in the near infrared. Coupling its radiation to photonic nanostructures will be an important step toward the realization of 2D material based nanophotonic devices that operate efficiently in the near infrared, which includes the technologically important optical telecommunication… ▽ More Atomically-thin black phosphorus (BP) is an emerging two dimensional (2D) material exhibiting bright photoluminescence in the near infrared. Coupling its radiation to photonic nanostructures will be an important step toward the realization of 2D material based nanophotonic devices that operate efficiently in the near infrared, which includes the technologically important optical telecommunication wavelength bands. In this letter, we demonstrate the optical coupling between atomically-thin BP and a 2D photonic crystal nanocavity. We employed a home-build dry transfer apparatus for placing a thin BP flake on the surface of the nanocavity. Their optical coupling was analyzed through measuring cavity mode emission under optical carrier injection at room temperature. △ Less

Submitted 28 September, 2018; originally announced September 2018.

Comments: 13 pages, 4 figures. This article has already been published in Applied Physics Letters

Journal ref: Appl. Phys. Lett. 110, 223105 (2017)

High-Q nanocavities in semiconductor-based three-dimensional photonic crystals

Authors: S. Takahashi, T. Tajiri, K. Watanabe, Y. Ota, S. Iwamoto, Y. Arakawa

Abstract: We experimentally demonstrated high quality factors (Q-factors) of nanocavities in three-dimensional photonic crystals by increasing the in-plane area of the structure. Entire structures made of GaAs were fabricated by a micro-manipulation technique, and the nanocavities contained InAs self-assembled quantum dots that emitted near-infrared light. The obtained Q-factor was improved to 93,000, which… ▽ More We experimentally demonstrated high quality factors (Q-factors) of nanocavities in three-dimensional photonic crystals by increasing the in-plane area of the structure. Entire structures made of GaAs were fabricated by a micro-manipulation technique, and the nanocavities contained InAs self-assembled quantum dots that emitted near-infrared light. The obtained Q-factor was improved to 93,000, which is 2.4-times larger than that in a previous report of a three-dimensional photonic crystal nanocavity. Due to this large Q-factor, we successfully observed a lasing oscillation from this cavity mode. △ Less

Submitted 18 September, 2018; originally announced September 2018.

Comments: 2 pages, 3 figures

Journal ref: Electronics Letters 54, 305 (2018)

Circularly polarized topological edge states derived from optical Weyl points in semiconductor-based chiral woodpile photonic crystals

Authors: S. Takahashi, S. Oono, S. Iwamoto, Y. Hatsugai, Y. Arakawa

Abstract: The polarizations of topological edge modes in the vicinity of optical Weyl points were numerically studied in chiral photonic crystals. We investigated two kinds of rotationally stacked woodpile structures in which planar rod arrays were vertically stacked one-by-one with an in-plane rotation angle of 60 or 45 degrees. Both structures showed pairs of optical Weyl points having topological numbers… ▽ More The polarizations of topological edge modes in the vicinity of optical Weyl points were numerically studied in chiral photonic crystals. We investigated two kinds of rotationally stacked woodpile structures in which planar rod arrays were vertically stacked one-by-one with an in-plane rotation angle of 60 or 45 degrees. Both structures showed pairs of optical Weyl points having topological numbers of opposite signs for photonic bands in low orders. Topological edge states derived from the Weyl points appeared below the light line, and were strongly confined at the air interfaces in a length shorter than the wavelength. Their polarizations in a direction perpendicular to the propagation direction were found to be one particular circular polarization that depended on the handedness of the structural chirality. Since these chiral photonic crystals can be fabricated using semiconductor materials such as GaAs or Si, the obtained robust planar waveguides for circularly polarized light at the interface between air and the semiconductor structure can be useful not only in photonics but also in spintronics or quantum information technology through spin-photon interfaces. △ Less

Submitted 18 September, 2018; originally announced September 2018.

Comments: 12 pages, 5 figures

Journal ref: J. Phys. Soc. Jpn., 87, 123401 (2018)

Topological photonic crystal nanocavity laser

Authors: Yasutomo Ota, Ryota Katsumi, Katsuyuki Watanabe, Satoshi Iwamoto, Yasuhiko Arakawa

Abstract: Topological edge states exist at the interfaces between two topologically-distinct materials. The presence and number of such modes are deterministically predicted from the bulk-band topologies, known as the bulk-edge correspondence. This principle is highly useful for predictably controlling optical modes in resonators made of photonic crystals (PhCs), leading to the recent demonstrations of micr… ▽ More Topological edge states exist at the interfaces between two topologically-distinct materials. The presence and number of such modes are deterministically predicted from the bulk-band topologies, known as the bulk-edge correspondence. This principle is highly useful for predictably controlling optical modes in resonators made of photonic crystals (PhCs), leading to the recent demonstrations of micro-scale topological lasers. Meanwhile, zero-dimensional topological trapped states in the nanoscale remained unexplored, despite its importance for enhancing light-matter interactions and for wide applications including single-mode nanolasers. Here, we report a topological PhC nanocavity with a near-diffraction-limited mode volume and its application to single-mode lasing. The topological origin of the nanocavity, formed at the interface between two topologically-distinct PhCs, guarantees the existence of only one mode within its photonic bandgap. The observed lasing accompanies a high spontaneous emission coupling factor stemming from the nanoscale confinement. These results encompass a way to greatly downscale topological photonics. △ Less

Submitted 26 June, 2018; originally announced June 2018.

Comments: 17 pages, 6 figures

Journal ref: Communications Physics 1, Article number: 86 (2018)

Scheme for media conversion between electronic spin and photonic orbital angular momentum based on photonic nanocavity

Authors: Chee Fai Fong, Yasutomo Ota, Satoshi Iwamoto, Yasuhiko Arakawa

Abstract: Light with nonzero orbital angular momentum (OAM) or twisted light is promising for quantum communication applications such as OAM-entangled photonic qubits. There exist photonic OAM to photonic spin angular momentum (SAM), as well as photonic SAM to electronic SAM interfaces but not any direct photonic OAM-electronic SAM (flying to stationary) media converter within a single device. Here, we prop… ▽ More Light with nonzero orbital angular momentum (OAM) or twisted light is promising for quantum communication applications such as OAM-entangled photonic qubits. There exist photonic OAM to photonic spin angular momentum (SAM), as well as photonic SAM to electronic SAM interfaces but not any direct photonic OAM-electronic SAM (flying to stationary) media converter within a single device. Here, we propose a scheme which converts photonic OAM to electronic SAM and vice versa within a single nanophotonic device. We employed a photonic crystal nanocavity with an embedded quantum dot (QD) which confines an electron spin as a stationary qubit. Spin polarized emission from the QD drive the rotation of the nanocavity modes via the strong optical spin-orbit interaction. The rotating modes then radiate light with nonzero OAM, allowing this device to serve as a transmitter. As this can be a unitary process, the time-reversed case enables the device to function as a receiver. This scheme could be generalized to other systems of resonator and quantum emitters such as a microdisk and defects in diamond for example. Our scheme shows the potential for realizing an (ultra)compact electronic SAM-photonic OAM interface to accommodate OAM as an additional degree of freedom for quantum information purposes. △ Less

Submitted 1 June, 2018; originally announced June 2018.

Comments: 15 pages, 6 figures

Transfer-printed quantum-dot nanolasers on a silicon photonic circuit

Authors: A. Osada, Y. Ota, R. Katsumi, K. Watanabe, S. Iwamoto, Y. Arakawa

Abstract: Quantum-dot (QD) nanolasers integrated on a silicon photonic circuit are demonstrated for the first time. QD nanolasers based on one-dimensional photonic crystal nanocavities containing InAs/GaAs QDs are integrated on CMOS-processed silicon waveguides cladded by silicon dioxide. We employed transfer-printing, whereby the three-dimensional stack of photonic nanostructures is assembled in a simple p… ▽ More Quantum-dot (QD) nanolasers integrated on a silicon photonic circuit are demonstrated for the first time. QD nanolasers based on one-dimensional photonic crystal nanocavities containing InAs/GaAs QDs are integrated on CMOS-processed silicon waveguides cladded by silicon dioxide. We employed transfer-printing, whereby the three-dimensional stack of photonic nanostructures is assembled in a simple pick-and-place manner. Lasing operation and waveguide-coupling of an assembled single nanolaser are confirmed through micro-photoluminescence spectroscopy. Furthermore, by repetitive transfer-printing, two QD nanolasers integrated onto a single silicon waveguide are demonstrated, opening a path to develop compact light sources potentially applicable for wavelength division multiplexing. △ Less

Submitted 30 March, 2018; originally announced March 2018.

Time-resolved vacuum Rabi oscillations in a quantum dot-nanocavity system

Authors: K. Kuruma, Y. Ota, M. Kakuda, S. Iwamoto, Y. Arakawa

Abstract: We report time-domain observation of vacuum Rabi oscillations in a single quantum dot strongly coupled to a nanocavity under incoherent optical carrier injection. We realize a photonic crystal nanocavity with a very high quality factor of >80,000 and employ it to clearly resolve the ultrafast vacuum Rabi oscillations by simple photoluminescence-based experiments. We found that the time-domain vacu… ▽ More We report time-domain observation of vacuum Rabi oscillations in a single quantum dot strongly coupled to a nanocavity under incoherent optical carrier injection. We realize a photonic crystal nanocavity with a very high quality factor of >80,000 and employ it to clearly resolve the ultrafast vacuum Rabi oscillations by simple photoluminescence-based experiments. We found that the time-domain vacuum Rabi oscillations were largely modified when changing the pump wavelength and intensity, even when marginal changes were detected in the corresponding photoluminescence spectra. We analyze the measured time-domain oscillations by fitting to simulation curves obtained with a cavity quantum electrodynamics model. The observed modifications of the oscillation curves were mainly induced by the change in the carrier capture and dephasing dynamics in the quantum dot, as well as the change in bare-cavity emission. This result suggests that vacuum Rabi oscillations can be utilized as a highly sensitive probe for the quantum dot dynamics. Our work points out a powerful alternative to conventional spectral-domain measurements for a deeper understanding of the vacuum Rabi dynamics in quantum dot-based cavity quantum electrodynamics systems. △ Less

Submitted 4 September, 2018; v1 submitted 15 March, 2018; originally announced March 2018.

Journal ref: Phys. Rev. B 97, 235448 (2018)

Transfer-printed single photon sources coupled to wire waveguides

Authors: Ryota Katsumi, Yasutomo Ota, Masahiro Kakuda, Satoshi Iwamoto, Yasuhiko Arakawa

Abstract: Photonic integrated circuits (PICs) are attractive platforms to perform large-scale quantum information processing. While highly-functional PICs (e.g. silicon based photonic-circuits) and high-performance single photon sources (SPSs, e.g. compound-semiconductor quantum dots (QDs)) have been independently demonstrated, their combination for single-photon-based applications has still been limited. T… ▽ More Photonic integrated circuits (PICs) are attractive platforms to perform large-scale quantum information processing. While highly-functional PICs (e.g. silicon based photonic-circuits) and high-performance single photon sources (SPSs, e.g. compound-semiconductor quantum dots (QDs)) have been independently demonstrated, their combination for single-photon-based applications has still been limited. This is largely due to the complexities of introducing SPSs into existing PIC platforms, which are generally realized with different materials and using distinct fabrication protocols. Here, we report a novel approach to combine SPSs and PICs prepared independently. We employ transfer printing, by which multiple desired SPSs can be integrated in a simple pick-and-place manner with a theoretical waveguide coupling efficiency >99%, fulfilling the demanding requirements of large-scale quantum applications. Experimentally, we demonstrated QD-based SPSs with high waveguide coupling efficiencies, together with the integration of two SPSs into a waveguide. Our approach will accelerate scalable fusion between modern PICs and cutting-edge quantum technologies. △ Less

Submitted 24 January, 2018; originally announced January 2018.

Comments: 16 pages and 5 figures for the main text, 17 pages and 8 figures for the supplementary

Journal ref: Optica Vol. 5, Issue 6, pp. 691-694 (2018)

Topologically protected elastic waves in one-dimensional phononic crystals of continuous media

Authors: Ingi Kim, Satoshi Iwamoto, Yasuhiko Arakawa

Abstract: We report the design of silica-based 1D phononic crystals (PnCs) with topologically distinct complete phononic bandgaps (PnBGs) and the observation of a topologically protected state of elastic waves at their interface. By choosing different structural parameters of unit cells, two PnCs can possess a common PnBG with different topological nature. At the interface between the two PnCs, a topologica… ▽ More We report the design of silica-based 1D phononic crystals (PnCs) with topologically distinct complete phononic bandgaps (PnBGs) and the observation of a topologically protected state of elastic waves at their interface. By choosing different structural parameters of unit cells, two PnCs can possess a common PnBG with different topological nature. At the interface between the two PnCs, a topological interface mode with a quality factor of ~5,650 is observed in the PnBG. Spatial confinement of the interface mode is also confirmed by using photoelastic imaging technique. Such topologically protected elastic states are potentially applicable for constructing novel phononic devices. △ Less

Submitted 15 October, 2017; originally announced October 2017.

Comments: 23 pages

Journal ref: Appl. Phys. Express 11 017201 (2017)

Circularly polarized vacuum field in three-dimensional chiral photonic crystals probed by quantum dot emission

Authors: S. Takahashi, Y. Ota, T. Tajiri, J. Tatebayashi, S. Iwamoto, Y. Arakawa

Abstract: The quantum nature of light-matter interactions in a circularly polarized vacuum field was probed by spontaneous emission from quantum dots in three-dimensional chiral photonic crystals. Due to the circularly polarized eigenmodes along the helical axis in the GaAs-based mirror-asymmetric structures we studied, we observed highly circularly polarized emission from the quantum dots. Both spectroscop… ▽ More The quantum nature of light-matter interactions in a circularly polarized vacuum field was probed by spontaneous emission from quantum dots in three-dimensional chiral photonic crystals. Due to the circularly polarized eigenmodes along the helical axis in the GaAs-based mirror-asymmetric structures we studied, we observed highly circularly polarized emission from the quantum dots. Both spectroscopic and time-resolved measurements confirmed that the obtained circularly polarized light was influenced by a large difference in the photonic density of states between the orthogonal components of the circular polarization in the vacuum field. △ Less

Submitted 17 July, 2017; originally announced July 2017.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. B 96, 195404 (2017)

Emission of Linearly Polarized Single Photons from Quantum Dots Contained in Nonpolar, Semipolar, and Polar Sections of Pencil-Like InGaN/GaN Nanowires

Authors: Z. Gacevic, M. Holmes, E. Chernysheva, M. Muller, A. Torres-Pardo, P. Veit, F. Bertram, J. Christen, J. M. Gonzalez-Calbet, Y. Arakawa, E. Calleja, S. Lazic

Abstract: A pencil-like morphology of homoepitaxially grown GaN nanowires is exploited for the fabrication of thin conformal intrawire InGaN nanoshells which host quantum dots in nonpolar, semipolar and polar crystal regions. All three quantum dot types exhibit single photon emission with narrow emission line widths and high degrees of linear optical polarization. The host crystal region strongly affects bo… ▽ More A pencil-like morphology of homoepitaxially grown GaN nanowires is exploited for the fabrication of thin conformal intrawire InGaN nanoshells which host quantum dots in nonpolar, semipolar and polar crystal regions. All three quantum dot types exhibit single photon emission with narrow emission line widths and high degrees of linear optical polarization. The host crystal region strongly affects both single photon wavelength and emission lifetime, reaching subnanosecond time scales for the non- and semipolar quantum dots. Localization sites in the InGaN potential landscape, most likely induced by indium fluctuations across the InGaN nanoshell, are identified as the driving mechanism for the single photon emission. The hereby reported pencil-like InGaN nanoshell is the first single nanostructure able to host all three types of single photon sources and is, thus, a promising building block for tunable quantum light devices integrated into future photonic circuits. △ Less

Submitted 28 June, 2017; v1 submitted 12 June, 2017; originally announced June 2017.

Comments: 14 pages, 7 figures

Generation method of a photonic NOON state with quantum dots in coupled nanocavities

Authors: Kenji Kamide, Yasutomo Ota, Satoshi Iwamoto, Yasuhiko Arakawa

Abstract: We propose a method to generate path-entangled $N00N$-state photons from quantum dots (QDs) and coupled nanocavities. In the systems we considered, cavity mode frequencies are tuned close to the biexciton two-photon resonance. Under appropriate conditions, the system can have the target $N00N$ state in the energy eigenstate, as a consequence of destructive quantum interference. The $N00N$ state ca… ▽ More We propose a method to generate path-entangled $N00N$-state photons from quantum dots (QDs) and coupled nanocavities. In the systems we considered, cavity mode frequencies are tuned close to the biexciton two-photon resonance. Under appropriate conditions, the system can have the target $N00N$ state in the energy eigenstate, as a consequence of destructive quantum interference. The $N00N$ state can be generated by the resonant laser excitation. This method, first introduced for two-photon $N00N$ state ($N=2$), can be extended toward higher $N00N$ state ($N>2$) based on our recipe, which is applied to the case of $N=4$ as an example. △ Less

Submitted 21 February, 2017; originally announced February 2017.

Comments: 13 pages, 11 figures

P-shell carriers assisted dynamic nuclear spin polarization in single quantum dots at zero external magnetic field

Authors: C. F. Fong, Y. Ota, E. Harbord, S. Iwamoto, Y. Arakawa

Abstract: Repeated injection of spin polarized carriers in a quantum dot leads to the polarization of nuclear spins, a process known as dynamic nuclear spin polarization (DNP). Here, we report the first observation of p-shell carrier assisted DNP in single QDs at zero external magnetic field. The nuclear field - measured by using the Overhauser shift of the singly charged exciton state of the QDs - continue… ▽ More Repeated injection of spin polarized carriers in a quantum dot leads to the polarization of nuclear spins, a process known as dynamic nuclear spin polarization (DNP). Here, we report the first observation of p-shell carrier assisted DNP in single QDs at zero external magnetic field. The nuclear field - measured by using the Overhauser shift of the singly charged exciton state of the QDs - continues to increase, even after the carrier population in the s-shell saturates. This is also accompanied by an abrupt increase in nuclear spin buildup time as p-shell emission overtakes that of the s-shell. We attribute the observation to p-shell electrons strongly altering the nuclear spin dynamics in the QD, supported by numerical simulation results based on a rate equation model of coupling between electron and nuclear spin system. DNP with p-shell carriers could open up avenues for further control to increase the degree of nuclear spin polarization in QDs. △ Less

Submitted 14 January, 2016; v1 submitted 13 January, 2016; originally announced January 2016.

Comments: 23 pages, 6 figures

Journal ref: Phys. Rev. B 93, 125306 (2016)

Eigenvalue decomposition method for photon statistics of frequency filtered fields and its applications to quantum dot emitters

Authors: Kenji Kamide, Satoshi Iwamoto, Yasuhiko Arakawa

Abstract: A simple calculation method for photon statistics of frequency-filtered fields is proposed. This method, based on eigenvalue decompositions of superoperators, allows us to study effects on the photon statistics of spectral filtering by various types of filters, such as Gaussian and rectangular filters as well as Lorentzian filters, which is not possible by conventional approaches. As an example, t… ▽ More A simple calculation method for photon statistics of frequency-filtered fields is proposed. This method, based on eigenvalue decompositions of superoperators, allows us to study effects on the photon statistics of spectral filtering by various types of filters, such as Gaussian and rectangular filters as well as Lorentzian filters, which is not possible by conventional approaches. As an example, this method is applied to a simulation of quantum dot single-photon emitters, where we found the efficient choice of the filter types to have pure single photons depends on the excitation conditions i.e. incoherent or coherent (and resonant) excitations. △ Less

Submitted 19 May, 2015; originally announced May 2015.

Comments: 9 pages, 5 figures

Journal ref: Phys. Rev. A 92, 033833 (2015)

Vacuum Rabi spectra of a single quantum emitter

Authors: Yasutomo Ota, Ryuichi Ohta, Naoto Kumagai, Satoshi Iwamoto, Yasuhiko Arakawa

Abstract: We report the observation of the vacuum Rabi splitting of a single quantum emitter by measuring its direct spontaneous emission into free space. We used a semiconductor quantum dot inside a photonic crystal nanocavity, in conjunction with an appropriate cavity design and filtering with a polarizer and an aperture, enabling the extraction of the inherently-weak emitter's signal. The emitter's vacuu… ▽ More We report the observation of the vacuum Rabi splitting of a single quantum emitter by measuring its direct spontaneous emission into free space. We used a semiconductor quantum dot inside a photonic crystal nanocavity, in conjunction with an appropriate cavity design and filtering with a polarizer and an aperture, enabling the extraction of the inherently-weak emitter's signal. The emitter's vacuum Rabi spectra exhibit clear differences to those measured by detecting the cavity photon leakage. Moreover, we observed an asymmetric vacuum Rabi spectrum induced by interference between the emitter and cavity detection channels. Our observations lay the groundwork for accessing various cavity quantum electrodynamics phenomena that manifest themselves only in the emitter's direct spontaneous emission. △ Less

Submitted 6 March, 2015; originally announced March 2015.

Comments: 12 pages, 9 figures

Localized guided-mode and cavity-mode double resonance in photonic crystal nanocavities

Authors: X. Liu, T. Shimada, R. Miura, S. Iwamoto, Y. Arakawa, Y. K. Kato

Abstract: We investigate the use of guided modes bound to defects in photonic crystals for achieving double resonances. Photoluminescence enhancement by more than three orders of magnitude has been observed when the excitation and emission wavelengths are simultaneously in resonance with the localized guided mode and cavity mode, respectively. We find that the localized guided modes are relatively insensiti… ▽ More We investigate the use of guided modes bound to defects in photonic crystals for achieving double resonances. Photoluminescence enhancement by more than three orders of magnitude has been observed when the excitation and emission wavelengths are simultaneously in resonance with the localized guided mode and cavity mode, respectively. We find that the localized guided modes are relatively insensitive to the size of the defect for one of the polarizations, allowing for flexible control over the wavelength combinations. This double resonance technique is expected to enable enhancement of photoluminescence and nonlinear wavelength conversion efficiencies in a wide variety of systems. △ Less

Submitted 17 December, 2014; originally announced December 2014.

Comments: 6 pages, 7 figures

Journal ref: Phys. Rev. Applied 3, 014006 (2015)

Circular dichroism in a three-dimensional semiconductor chiral photonic crystal

Authors: S. Takahashi, T. Tajiri, Y. Ota, J. Tatebayashi, S. Iwamoto, Y. Arakawa

Abstract: Circular dichroism covering the telecommunication band is experimentally demonstrated in a semiconductor-based three-dimensional chiral photonic crystal (PhC). We design a rotationally-stacked woodpile PhC structure where neighboring layers are rotated by 60 degrees and three layers construct a single helical unit. The mirror-asymmetric PhC made from GaAs with sub-micron periodicity is fabricated… ▽ More Circular dichroism covering the telecommunication band is experimentally demonstrated in a semiconductor-based three-dimensional chiral photonic crystal (PhC). We design a rotationally-stacked woodpile PhC structure where neighboring layers are rotated by 60 degrees and three layers construct a single helical unit. The mirror-asymmetric PhC made from GaAs with sub-micron periodicity is fabricated by a micro-manipulation technique. Due to the large contrast of refractive indices between GaAs and air, the experimentally obtained circular dichroism extends over a wide wavelength range, with the transmittance of right-handed circularly polarized incident light being 85% and that of left-handed light being 15% at a wavelength of 1300 nm. The obtained results show good agreement with numerical simulations. △ Less

Submitted 18 August, 2014; originally announced August 2014.

Comments: 4 pages, 4 figures

Journal ref: Appl. Phys. Lett. 105, 051107 (2014)

Ultralow mode-volume photonic crystal nanobeam cavities for high efficiency coupling to individual carbon nanotube emitters

Authors: R. Miura, S. Imamura, R. Ohta, A. Ishii, X. Liu, T. Shimada, S. Iwamoto, Y. Arakawa, Y. K. Kato

Abstract: We report on high efficency coupling of individual air-suspended carbon nanotubes to silicon photonic crystal nanobeam cavities. Photoluminescence images of dielectric- and air-mode cavities reflect their distinctly different mode profiles and show that fields in the air are important for coupling. We find that the air-mode cavities couple more efficiently, and estimated spontaneous emission coupl… ▽ More We report on high efficency coupling of individual air-suspended carbon nanotubes to silicon photonic crystal nanobeam cavities. Photoluminescence images of dielectric- and air-mode cavities reflect their distinctly different mode profiles and show that fields in the air are important for coupling. We find that the air-mode cavities couple more efficiently, and estimated spontaneous emission coupling factors reach a value as high as 0.85. Our results demonstrate advantages of ultralow mode-volumes in air-mode cavities for coupling to low-dimensional nanoscale emitters. △ Less

Submitted 16 July, 2014; originally announced July 2014.

Comments: 4 pages, 4 figures

Journal ref: Nat. Commun. 5, 5580 (2014)

Impact of the dark path on quantum dot single photon emitters in small cavities

Authors: Kenji Kamide, Satoshi Iwamoto, Yasuhiko Arakawa

Abstract: Incoherent pum** in quantum dots (QDs) can create a biexciton state through two paths: via the formation of bright or dark exciton states. The latter, dark-pum**, path is shown to enhance the probability of two-photon simultaneous emission, and hence increase $g^{(2)}(0)$ by a factor $\propto 1/γ_S$, due to the slow spin relaxation rate $γ_S$ in QDs. The existence of the dark path is shown to… ▽ More Incoherent pum** in quantum dots (QDs) can create a biexciton state through two paths: via the formation of bright or dark exciton states. The latter, dark-pum**, path is shown to enhance the probability of two-photon simultaneous emission, and hence increase $g^{(2)}(0)$ by a factor $\propto 1/γ_S$, due to the slow spin relaxation rate $γ_S$ in QDs. The existence of the dark path is shown to impose a limitation on the single photon (SP) emission process, especially in nanocavities which exhibit a large exciton-cavity coupling and a Purcell enhancement for fast quantum telecommunications. △ Less

Submitted 12 May, 2014; originally announced May 2014.

Comments: 12 pages, 6 figures

Journal ref: Phys. Rev. Lett. 113, 143604 (2014)

Giant optical rotation in a three-dimensional semiconductor chiral photonic crystal

Authors: S. Takahashi, A. Tandaechanurat, R. Igusa, Y. Ota, J. Tatebayashi, S. Iwamoto, Y. Arakawa

Abstract: Optical rotation is experimentally demonstrated in a semiconductor-based three-dimensional chiral photonic crystal (PhC) at a telecommunication wavelength. We design a rotationally-stacked woodpile PhC structure, where neighboring layers are rotated by 45 degrees and four layers construct a single helical unit. The mirror-asymmetric PhC made from GaAs with sub-micron periodicity is fabricated by a… ▽ More Optical rotation is experimentally demonstrated in a semiconductor-based three-dimensional chiral photonic crystal (PhC) at a telecommunication wavelength. We design a rotationally-stacked woodpile PhC structure, where neighboring layers are rotated by 45 degrees and four layers construct a single helical unit. The mirror-asymmetric PhC made from GaAs with sub-micron periodicity is fabricated by a micro-manipulation technique. The linearly polarized light incident on the structure undergoes optical rotation during transmission. The obtained results show good agreement with numerical simulations. The measurement demonstrates the largest optical rotation angle as large as 23 degrees at 1300 nm wavelength for a single helical unit. △ Less

Submitted 12 November, 2013; originally announced November 2013.

Comments: 8 pages, 5 figures

Journal ref: Optics Express 21, 29905 (2013)