-
Status of Xtend telescope onboard X-Ray Imaging and Spectroscopy Mission (XRISM)
Authors:
Koji Mori,
Hiroshi Tomida,
Hiroshi Nakajima,
Takashi Okajima,
Hirofumi Noda,
Hiroyuki Uchida,
Hiromasa Suzuki,
Shogo Benjamin Kobayashi,
Tomokage Yoneyama,
Kouichi Hagino,
Kumiko Nobukawa,
Takaaki Tanaka,
Hiroshi Murakami,
Hideki Uchiyama,
Masayoshi Nobukawa,
Hironori Matsumoto,
Takeshi Tsuru,
Makoto Yamauchi,
Isamu Hatsukade,
Hirokazu Odaka,
Takayoshi Kohmura,
Kazutaka Yamaoka,
Manabu Ishida,
Yoshitomo Maeda,
Takayuki Hayashi
, et al. (38 additional authors not shown)
Abstract:
Xtend is one of the two telescopes onboard the X-ray imaging and spectroscopy mission (XRISM), which was launched on September 7th, 2023. Xtend comprises the Soft X-ray Imager (SXI), an X-ray CCD camera, and the X-ray Mirror Assembly (XMA), a thin-foil-nested conically approximated Wolter-I optics. A large field of view of $38^{\prime}\times38^{\prime}$ over the energy range from 0.4 to 13 keV is…
▽ More
Xtend is one of the two telescopes onboard the X-ray imaging and spectroscopy mission (XRISM), which was launched on September 7th, 2023. Xtend comprises the Soft X-ray Imager (SXI), an X-ray CCD camera, and the X-ray Mirror Assembly (XMA), a thin-foil-nested conically approximated Wolter-I optics. A large field of view of $38^{\prime}\times38^{\prime}$ over the energy range from 0.4 to 13 keV is realized by the combination of the SXI and XMA with a focal length of 5.6 m. The SXI employs four P-channel, back-illuminated type CCDs with a thick depletion layer of 200 $μ$m. The four CCD chips are arranged in a 2$\times$2 grid and cooled down to $-110$ $^{\circ}$C with a single-stage Stirling cooler. Before the launch of XRISM, we conducted a month-long spacecraft thermal vacuum test. The performance verification of the SXI was successfully carried out in a course of multiple thermal cycles of the spacecraft. About a month after the launch of XRISM, the SXI was carefully activated and the soundness of its functionality was checked by a step-by-step process. Commissioning observations followed the initial operation. We here present pre- and post-launch results verifying the Xtend performance. All the in-orbit performances are consistent with those measured on ground and satisfy the mission requirement. Extensive calibration studies are ongoing.
△ Less
Submitted 28 June, 2024;
originally announced June 2024.
-
Initial operations of the Soft X-ray Imager onboard XRISM
Authors:
Hiromasa Suzuki,
Tomokage Yoneyama,
Shogo B. Kobayashi,
Hirofumi Noda,
Hiroyuki Uchida,
Kumiko K. Nobukawa,
Kouichi Hagino,
Koji Mori,
Hiroshi Tomida,
Hiroshi Nakajima,
Takaaki Tanaka,
Hiroshi Murakami,
Hideki Uchiyama,
Masayoshi Nobukawa,
Yoshiaki Kanemaru,
Yoshinori Otsuka,
Haruhiko Yokosu,
Wakana Yonemaru,
Hanako Nakano,
Kazuhiro Ichikawa,
Reo Takemoto,
Tsukasa Matsushima,
Marina Yoshimoto,
Mio Aoyagi,
Kohei Shima
, et al. (30 additional authors not shown)
Abstract:
XRISM (X-Ray Imaging and Spectroscopy Mission) is an astronomical satellite with the capability of high-resolution spectroscopy with the X-ray microcalorimeter, Resolve, and wide field-of-view imaging with the CCD camera, Xtend. The Xtend consists of the mirror assembly (XMA: X-ray Mirror Assembly) and detector (SXI: Soft X-ray Imager). The components of SXI include CCDs, analog and digital electr…
▽ More
XRISM (X-Ray Imaging and Spectroscopy Mission) is an astronomical satellite with the capability of high-resolution spectroscopy with the X-ray microcalorimeter, Resolve, and wide field-of-view imaging with the CCD camera, Xtend. The Xtend consists of the mirror assembly (XMA: X-ray Mirror Assembly) and detector (SXI: Soft X-ray Imager). The components of SXI include CCDs, analog and digital electronics, and a mechanical cooler. After the successful launch on September 6th, 2023 (UT) and subsequent critical operations, the mission instruments were turned on and set up. The CCDs have been kept at the designed operating temperature of $-110^\circ$C ~after the electronics and cooling system were successfully set up. During the initial operation phase, which continued for more than a month after the critical operations, we verified the observation procedure, stability of the cooling system, all the observation options with different imaging areas and/or timing resolutions, and operations for protection against South Atlantic Anomaly. We optimized the operation procedure and observation parameters including the cooler settings, imaging areas for the specific modes with higher timing resolutions, and event selection algorithm. We summarize our policy and procedure of the initial operations for SXI. We also report on a couple of issues we faced during the initial operations and lessons learned from them.
△ Less
Submitted 28 June, 2024;
originally announced June 2024.
-
Systematic effects on a Compton polarimeter at the focus of an X-ray mirror
Authors:
M. Aoyagi,
R. G. Bose,
S. Chun,
E. Gau,
K. Hu,
K. Ishiwata,
N. K. Iyer,
F. Kislat,
M. Kiss,
K. Klepper,
H. Krawczynski,
L. Lisalda,
Y. Maeda,
F. af Malmborg,
H. Matsumoto,
A. Miyamoto,
T. Miyazawa,
M. Pearce,
B. F. Rauch,
N. Rodriguez Cavero,
S. Spooner,
H. Takahashi,
Y. Uchida,
A. T. West,
K. Wimalasena
, et al. (1 additional authors not shown)
Abstract:
XL-Calibur is a balloon-borne Compton polarimeter for X-rays in the $\sim$15-80 keV range. Using an X-ray mirror with a 12 m focal length for collecting photons onto a beryllium scattering rod surrounded by CZT detectors, a minimum-detectable polarization as low as $\sim$3% is expected during a 24-hour on-target observation of a 1 Crab source at 45$^{\circ}$ elevation. Systematic effects alter the…
▽ More
XL-Calibur is a balloon-borne Compton polarimeter for X-rays in the $\sim$15-80 keV range. Using an X-ray mirror with a 12 m focal length for collecting photons onto a beryllium scattering rod surrounded by CZT detectors, a minimum-detectable polarization as low as $\sim$3% is expected during a 24-hour on-target observation of a 1 Crab source at 45$^{\circ}$ elevation. Systematic effects alter the reconstructed polarization as the mirror focal spot moves across the beryllium scatterer, due to pointing offsets, mechanical misalignment or deformation of the carbon-fiber truss supporting the mirror and the polarimeter. Unaddressed, this can give rise to a spurious polarization signal for an unpolarized flux, or a change in reconstructed polarization fraction and angle for a polarized flux. Using bench-marked Monte-Carlo simulations and an accurate mirror point-spread function characterized at synchrotron beam-lines, systematic effects are quantified, and mitigation strategies discussed. By recalculating the scattering site for a shifted beam, systematic errors can be reduced from several tens of percent to the few-percent level for any shift within the scattering element. The treatment of these systematic effects will be important for any polarimetric instrument where a focused X-ray beam is im**ing on a scattering element surrounded by counting detectors.
△ Less
Submitted 23 February, 2024;
originally announced February 2024.
-
Xtend, the Soft X-ray Imaging Telescope for the X-ray Imaging and Spectroscopy Mission (XRISM)
Authors:
Koji Mori,
Hiroshi Tomida,
Hiroshi Nakajima,
Takashi Okajima,
Hirofumi Noda,
Takaaki Tanaka,
Hiroyuki Uchida,
Kouichi Hagino,
Shogo Benjamin Kobayashi,
Hiromasa Suzuki,
Tessei Yoshida,
Hiroshi Murakami,
Hideki Uchiyama,
Masayoshi Nobukawa,
Kumiko Nobukawa,
Tomokage Yoneyama,
Hironori Matsumoto,
Takeshi Tsuru,
Makoto Yamauchi,
Isamu Hatsukade,
Manabu Ishida,
Yoshitomo Maeda,
Takayuki Hayashi,
Keisuke Tamura,
Rozenn Boissay-Malaquin
, et al. (30 additional authors not shown)
Abstract:
Xtend is a soft X-ray imaging telescope developed for the X-Ray Imaging and Spectroscopy Mission (XRISM). XRISM is scheduled to be launched in the Japanese fiscal year 2022. Xtend consists of the Soft X-ray Imager (SXI), an X-ray CCD camera, and the X-ray Mirror Assembly (XMA), a thin-foil-nested conically approximated Wolter-I optics. The SXI uses the P-channel, back-illuminated type CCD with an…
▽ More
Xtend is a soft X-ray imaging telescope developed for the X-Ray Imaging and Spectroscopy Mission (XRISM). XRISM is scheduled to be launched in the Japanese fiscal year 2022. Xtend consists of the Soft X-ray Imager (SXI), an X-ray CCD camera, and the X-ray Mirror Assembly (XMA), a thin-foil-nested conically approximated Wolter-I optics. The SXI uses the P-channel, back-illuminated type CCD with an imaging area size of 31 mm on a side. The four CCD chips are arranged in a 2$\times$2 grid and can be cooled down to $-120$ $^{\circ}$C with a single-stage Stirling cooler. The XMA nests thin aluminum foils coated with gold in a confocal way with an outer diameter of 45~cm. A pre-collimator is installed in front of the X-ray mirror for the reduction of the stray light. Combining the SXI and XMA with a focal length of 5.6m, a field of view of $38^{\prime}\times38^{\prime}$ over the energy range from 0.4 to 13 keV is realized. We have completed the fabrication of the flight model of both SXI and XMA. The performance verification has been successfully conducted in a series of sub-system level tests. We also carried out on-ground calibration measurements and the data analysis is ongoing.
△ Less
Submitted 13 March, 2023;
originally announced March 2023.
-
Numerical study on sound vibration of an air-reed instrument with compressible LES
Authors:
Masataka Miyamoto,
Yasunori Ito,
Kin'ya Takahashi,
Toshiya Takami,
Taizo Kobayashi,
Akira Nishida,
Mutsumi Aoyagi
Abstract:
Acoustic mechanics of air-reed instruments is investigated numerically with compressible Large-eddy simulation (LES). Taking a two dimensional air-reed instrument model, we have succeeded in reproducing sound oscillations excited in the resonator and have studied the characteristic feature of air-reed instruments, i.e., the relation of the sound frequency with the jet velocity described by the sem…
▽ More
Acoustic mechanics of air-reed instruments is investigated numerically with compressible Large-eddy simulation (LES). Taking a two dimensional air-reed instrument model, we have succeeded in reproducing sound oscillations excited in the resonator and have studied the characteristic feature of air-reed instruments, i.e., the relation of the sound frequency with the jet velocity described by the semi-empirical theory developed by Cremer & Ising, Coltman and other authors based on experimental results.
△ Less
Submitted 19 May, 2010;
originally announced May 2010.
-
3D Calculation with Compressible LES for Sound Vibration of Ocarina
Authors:
Taizo Kobayashi,
Toshiya Takami,
Masataka Miyamoto,
Kin'ya Takahashi,
Akira Nishida,
Mutsumi Aoyagi
Abstract:
Sounding mechanism is numerically analyzed to elucidate physical processes in air-reed instruments. As an example, compressible large-eddy simulations (LES) are performed on both two and three dimensional ocarina. Since, among various acoustic instruments, ocarina is known as a combined system consisting of an edge-tone and a Helmholtz resonator, our analysis is mainly devoted to the resonant dy…
▽ More
Sounding mechanism is numerically analyzed to elucidate physical processes in air-reed instruments. As an example, compressible large-eddy simulations (LES) are performed on both two and three dimensional ocarina. Since, among various acoustic instruments, ocarina is known as a combined system consisting of an edge-tone and a Helmholtz resonator, our analysis is mainly devoted to the resonant dynamics in the cavity. We focused on oscillation frequencies when we blow the instruments with various velocities.
△ Less
Submitted 18 November, 2009;
originally announced November 2009.
-
Sound Generation by a Turbulent Flow in Musical Instruments - Multiphysics Simulation Approach -
Authors:
Taizo Kobayashi,
Toshiya Takami,
Kin'ya Takahashi,
Ryota Mibu,
Mutsumi Aoyagi
Abstract:
Total computational costs of scientific simulations are analyzed between direct numerical simulations (DNS) and multiphysics simulations (MPS) for sound generation in musical instruments. In order to produce acoustic sound by a turbulent flow in a simple recorder-like instrument, compressible fluid dynamic calculations with a low Mach number are required around the edges and the resonator of the…
▽ More
Total computational costs of scientific simulations are analyzed between direct numerical simulations (DNS) and multiphysics simulations (MPS) for sound generation in musical instruments. In order to produce acoustic sound by a turbulent flow in a simple recorder-like instrument, compressible fluid dynamic calculations with a low Mach number are required around the edges and the resonator of the instrument in DNS, while incompressible fluid dynamic calculations coupled with dynamics of sound propagation based on the Lighthill's acoustic analogy are used in MPS. These strategies are evaluated not only from the viewpoint of computational performances but also from the theoretical points of view as tools for scientific simulations of complicated systems.
△ Less
Submitted 6 September, 2007;
originally announced September 2007.
-
Multi-physics Extension of OpenFMO Framework
Authors:
Toshiya Takami,
Jun Maki,
Jun'ichi Ooba,
Yuuichi Inadomi,
Hiroaki Honda,
Ryutaro Susukita,
Koji Inoue,
Taizo Kobayashi,
Rie Nogita,
Mutsumi Aoyagi
Abstract:
OpenFMO framework, an open-source software (OSS) platform for Fragment Molecular Orbital (FMO) method, is extended to multi-physics simulations (MPS). After reviewing the several FMO implementations on distributed computer environments, the subsequent development planning corresponding to MPS is presented. It is discussed which should be selected as a scientific software, lightweight and reconfi…
▽ More
OpenFMO framework, an open-source software (OSS) platform for Fragment Molecular Orbital (FMO) method, is extended to multi-physics simulations (MPS). After reviewing the several FMO implementations on distributed computer environments, the subsequent development planning corresponding to MPS is presented. It is discussed which should be selected as a scientific software, lightweight and reconfigurable form or large and self-contained form.
△ Less
Submitted 18 July, 2007;
originally announced July 2007.
-
Open-architecture Implementation of Fragment Molecular Orbital Method for Peta-scale Computing
Authors:
Toshiya Takami,
Jun Maki,
Jun-ichi Ooba,
Yuichi Inadomi,
Hiroaki Honda,
Taizo Kobayashi,
Rie Nogita,
Mutsumi Aoyagi
Abstract:
We present our perspective and goals on highperformance computing for nanoscience in accordance with the global trend toward "peta-scale computing." After reviewing our results obtained through the grid-enabled version of the fragment molecular orbital method (FMO) on the grid testbed by the Japanese Grid Project, National Research Grid Initiative (NAREGI), we show that FMO is one of the best ca…
▽ More
We present our perspective and goals on highperformance computing for nanoscience in accordance with the global trend toward "peta-scale computing." After reviewing our results obtained through the grid-enabled version of the fragment molecular orbital method (FMO) on the grid testbed by the Japanese Grid Project, National Research Grid Initiative (NAREGI), we show that FMO is one of the best candidates for peta-scale applications by predicting its effective performance in peta-scale computers. Finally, we introduce our new project constructing a peta-scale application in an open-architecture implementation of FMO in order to realize both goals of highperformance in peta-scale computers and extendibility to multiphysics simulations.
△ Less
Submitted 10 January, 2007;
originally announced January 2007.
-
Interaction and Localization of One-electron Orbitals in an Organic Molecule: Fictitious Parameter Analysis for Multi-physics Simulations
Authors:
Toshiya Takami,
Jun Maki,
Jun-ichi Ooba,
Taizo Kobayashi,
Rie Nogita,
Mutsumi Aoyagi
Abstract:
We present a new methodology to analyze complicated multi-physics simulations by introducing a fictitious parameter. Using the method, we study quantum mechanical aspects of an organic molecule in water. The simulation is variationally constructed from the ab initio molecular orbital method and the classical statistical mechanics with the fictitious parameter representing the coupling strength b…
▽ More
We present a new methodology to analyze complicated multi-physics simulations by introducing a fictitious parameter. Using the method, we study quantum mechanical aspects of an organic molecule in water. The simulation is variationally constructed from the ab initio molecular orbital method and the classical statistical mechanics with the fictitious parameter representing the coupling strength between solute and solvent. We obtain a number of one-electron orbital energies of the solute molecule derived from the Hartree-Fock approximation, and eigenvalue-statistical analysis developed in the study of nonintegrable systems is applied to them. Based on the results, we analyze localization properties of the electronic wavefunctions under the influence of the solvent.
△ Less
Submitted 22 November, 2006;
originally announced November 2006.
