-
NiOx passivation in perovskite solar cells: from surface reactivity to device performance
Authors:
John Mohanraj,
Bipasa Samanta,
Osbel Almora,
Renán Escalante,
Lluis F. Marsal,
Sandra Jenatsch,
Arno Gadola,
Beat Ruhstaller,
Juan A. Anta,
Maytal Caspary Toroker,
Selina Olthof
Abstract:
Non-stoichiometric nickel oxide (NiOx) is the only metal oxide successfully used as hole transport material in p-i-n type perovskite solar cells (PSCs). Its favorable opto-electronic properties and facile large-scale preparation methods are potentially relevant for future commercialization of PSCs, though currently low operational stability of PSCs containing NiOx hole transport layers are reporte…
▽ More
Non-stoichiometric nickel oxide (NiOx) is the only metal oxide successfully used as hole transport material in p-i-n type perovskite solar cells (PSCs). Its favorable opto-electronic properties and facile large-scale preparation methods are potentially relevant for future commercialization of PSCs, though currently low operational stability of PSCs containing NiOx hole transport layers are reported. Poorly understood degradation reactions at the interface to the perovskite are seen as cause for the inferior stability and a variety of interface passivation approaches have been shown to be effective in improving the overall solar cell performance. To gain a better understanding of the processes happening at this interface, we systematically passivated possible specific defects on NiOx with three different categories of organic/inorganic compounds. The effects on the NiOx and the perovskite (MAPbI3) were investigated using x-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and scanning electron microscopy (SEM) where we find that the structural stability and film formation can be significantly affected. In combination with Density Functional Theory (DFT) calculations, a likely origin of NiOx-perovskite degradation interactions is proposed. The surface passivated NiOx was incorporated into MAPbI3 based PSCs and its influence on overall performance, particularly operational stability, was investigated by current-voltage (J-V), impedance spectroscopy (IS), and open circuit voltage decay (OCVD) measurements. Interestingly, we find that a superior structural stability due to an interface passivation must not relate to high operational stability. The discrepancy comes from the formation of excess ions at the interface which negatively impacts all solar cell parameters.
△ Less
Submitted 15 February, 2024;
originally announced February 2024.
-
Degradation Analysis of Perovskite Solar Cells via Short-Circuit Impedance Spectroscopy: A case study on NiOx passivation
Authors:
Osbel Almora,
Pilar López-Varo,
Renán Escalante,
John Mohanraj,
Luis F Marsal,
Selina Olthof,
Juan A. Anta
Abstract:
Perovskite solar cells (PSCs) continue to be the front runner technology among emerging photovoltaic devices in terms of power conversion efficiency and application versatility. However, not only the stability but also the understanding of their ionic-electronic transport mechanisms continues to be challenging. In this work, the case study of NiOx-based inverted PSCs and the effect of different in…
▽ More
Perovskite solar cells (PSCs) continue to be the front runner technology among emerging photovoltaic devices in terms of power conversion efficiency and application versatility. However, not only the stability but also the understanding of their ionic-electronic transport mechanisms continues to be challenging. In this work, the case study of NiOx-based inverted PSCs and the effect of different interface passivating treatments on the device performance are approached. Our experiments include impedance spectroscopy (IS) measurements in short-circuit under different illumination intensities and operational stability tests under constant illumination intensity. It is found that certain surface treatments lead to more stable performance. However, protic anion donors can induce, both, an initial performance decrease and a subsequent reactivity during light exposure which apparently improves the cells performance. Our drift-diffusion simulations suggest that the modification of the interface with the hole transport material may have decrease the conductivity, as well as the ion and electron mobilities at the perovskite and the NiOx, respectively. Importantly, capacitance and resistance are shown to peak maximum and minimum values, respectively, around specific ranges of mobile ion concentration. Our results introduce a general route for characterization of degradation paths in PSCs via IS in short-circuit.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Ultrathin plasma polymer passivation of perovskite solar cells for improved stability and reproducibility
Authors:
Jose M. Obrero-Perez,
Lidia Contreras-Bernal+,
Fernando Nunez-Galvez,
Javier Castillo-Seoane,
Karen Valadez-Villalobos,
Francisco J. Aparicio,
Juan A. Anta,
Ana Borras,
Juan R. Sanchez-Valencia,
Angel Barranco+
Abstract:
Despite the youthfulness of hybrid halide perovskite solar cells, their efficiencies are currently comparable to commercial silicon and have surpassed quantum-dots solar cells. Yet, the scalability of these devices is a challenge due to their low reproducibility and stability under environmental conditions. However, the methods reported to date to tackle such issues recurrently involve the use of…
▽ More
Despite the youthfulness of hybrid halide perovskite solar cells, their efficiencies are currently comparable to commercial silicon and have surpassed quantum-dots solar cells. Yet, the scalability of these devices is a challenge due to their low reproducibility and stability under environmental conditions. However, the methods reported to date to tackle such issues recurrently involve the use of solvent methods that would further complicate their transfer to industry. Herein we present a reliable alternative relaying in the implementation of an ultrathin plasma polymer as passivation interface between the electron transport material and the hybrid perovskite layer. Such nanoengineering interface provides solar devices with increased long-term stability under ambient conditions. Thus, without consideringr any additional encapsulation step, the cells retain more than 80 % of their efficiency after being exposed to the ambient atmosphere for more than 1000 h. Moreover, this plasma polymer passivation strategy significantly improves the coverage of the mesoporous scaffold by the perovskite layer, providing the solar cells with enhanced performance as well as improved reproducibility.
△ Less
Submitted 16 February, 2022;
originally announced February 2022.
-
Transferable classical force field for pure and mixed metal halide perovskites parameterized from first principles
Authors:
Juan Antonio Seijas-Bellido,
Bipasa Samanta,
Karen Valadez-Villalobos,
Juan Jesús Gallardo,
Javier Navas,
Salvador R. G. Balestra,
Rafael María Madero-Castro,
Jose Manuel Vicent-Luna,
Shuxia Tao,
Maytal Caspary Toroker,
Juan Antonio Anta
Abstract:
Many key features in photovoltaic perovskites occur in relatively long time scales and involve mixed compositions. This requires realistic but also numerically simple models. In this work we present a transferable classical force field to describe the mixed hybrid perovskite MA$_x$FA$_{1-x}$Pb(Br$_y$I$_{1-y}$)$_3$ for variable composition ($\forall x,y \in [0,1]$). The model includes Lennard-Jones…
▽ More
Many key features in photovoltaic perovskites occur in relatively long time scales and involve mixed compositions. This requires realistic but also numerically simple models. In this work we present a transferable classical force field to describe the mixed hybrid perovskite MA$_x$FA$_{1-x}$Pb(Br$_y$I$_{1-y}$)$_3$ for variable composition ($\forall x,y \in [0,1]$). The model includes Lennard-Jones and Buckingham potentials to describe the interactions between the atoms of the inorganic lattice and the organic molecule, and the AMBER model to describe intramolecular atomic interactions. Most of the parameters of the force field have been obtained by means of a genetic algorithm previously developed to parameterize the CsPb(Br$_x$I$_{1-x}$)$_3$ perovskite. The algorithm finds the best parameter set that simultaneously fits the DFT energies obtained for several crystalline structures with moderate degrees of distortion with respect to the equilibrium configuration. The resulting model reproduces correctly the XRD patterns, the expansion of the lattice upon I/Br substitution and the thermal expansion coefficients. We use the model to run classical molecular dynamics simulations with up to 8600 atoms and simulation times of up to 40~ns. From the simulations we have extracted the ion diffusion coefficient of the pure and mixed perovskites, presenting for the first time these values obtained by a fully dynamical method using a transferable model fitted to first principles calculations. The values here reported can be considered as the theoretical upper limit for ion migration dynamics induced by halide vacancies in photovoltaic perovskite devices under operational conditions.
△ Less
Submitted 23 November, 2021;
originally announced November 2021.
-
Highly anisotropic organometal halide perovskite nanowalls grown by Glancing Angle Deposition
Authors:
Javier Castillo-Seoane,
Lidia Contreras-Bernal,
Jose M. Obrero-Perez,
Xabier Garcia-Casas,
Francisco Lorenzo-Lazaro,
Francisco J. Aparicio,
M. Carmen Lopez-Santos,
T. Cristina Rojas,
Juan A. Anta,
Ana Borras,
Angel Barranco,
Juan R. Sanchez-Valencia
Abstract:
Polarizers are ubiquitous components in optoelectronic devices of daily use as displays, optical sensors or photographic cameras, among others. Yet the control over light polarization is an unresolved challenge as the main drawback of the current display technologies relays in significant optical losses. In such a context, organometal halide perovskites can play a decisive role given their flexibl…
▽ More
Polarizers are ubiquitous components in optoelectronic devices of daily use as displays, optical sensors or photographic cameras, among others. Yet the control over light polarization is an unresolved challenge as the main drawback of the current display technologies relays in significant optical losses. In such a context, organometal halide perovskites can play a decisive role given their flexible synthesis with under design optical properties . Therefore, along with their outstanding electrical properties have elevated hybrid perovskites as the material of choice in photovoltaics and optoelectronics. Among the different organometal halide perovskite nanostructures, nanowires and nanorods have lately arise as key players for the control of light polarization for lighting or detector applications. Herein, we will present the unprecedented fabrication of highly aligned and anisotropic methylammonium lead iodide (MAPI) perovskite nanowalls by Glancing Angle Deposition of PbI2 under high vacuum followed by CH3NH3I deposition at normal angle. Our approach offers a direct route for the fabrication of perovskite nanostructures virtually on any substrate, including on photovoltaic devices. The unparalleled alignment degree of the perovskite nanowalls provides the samples with strong anisotropic optical properties such as light absorption and photoluminescence, the latter with a maximum polarization ratio of P=0.43. Furthermore, the implementation of the MAPI nanowalls in photovoltaic devices provides them with a polarization-sensitive response, with a maximum photocurrent difference of 2.1 % when illuminating with the near-infrared range of the solar spectrum (>700 nm). Our facile vacuum-based approach embodies a milestone in the development of last generation polarization-sensitive perovskite-based optoelectronic devices such as lighting appliances or self-powered photodetectors.
△ Less
Submitted 15 September, 2021;
originally announced September 2021.
-
A new ideality factor for perovskite solar cells and an analytical theory for their impedance spectroscopy response
Authors:
Laurence J. Bennett,
Antonio J. Riquelme,
Nicola E. Courtier,
Juan A. Anta,
Giles Richardson
Abstract:
Impedance spectroscopy (IS) is a relatively straightforward experimental technique that is commonly used to obtain information about the physical and chemical characteristics of photovoltaic devices. However, the non-standard physical behaviour of perovskite solar cells (PSC), which are heavily influenced by the motion of mobile ion vacancies, has hindered efforts to obtain a consistent theory to…
▽ More
Impedance spectroscopy (IS) is a relatively straightforward experimental technique that is commonly used to obtain information about the physical and chemical characteristics of photovoltaic devices. However, the non-standard physical behaviour of perovskite solar cells (PSC), which are heavily influenced by the motion of mobile ion vacancies, has hindered efforts to obtain a consistent theory to interpret PSC impedance data. This work rectifies this omission by deriving a simple analytic model of the impedance response of a PSC from the underlying drift-diffusion model of charge carrier dynamics and ion vacancy motion. Extremely good agreement is shown between the analytic model and the much more complex drift-diffusion model in regimes (including maximum power point) where the applied voltage is close to the open circuit voltage $V_{oc}$. Both models show good qualitative agreement to experimental IS data in the literature and predict many of the observed anomalous features found in impedance measurements on PSCs, such as `the giant low frequency capacitance` and `inductive arcs' in the Nyquist plots. Where the physical properties of the PSC are already known the analytic model can be used to predict the recombination current $j_{rec}$ and the high and low frequency resistances and capacitances of the cell, $R_{HF}$, $C_{HF}$, $R_{LF}$ and $C_{LF}$. In scenarios where the physical properties of the cell are unknown the analytic model can also used to extract physical parameters from experimental PSC impedance data. {A novel physical parameter of particular significance to PSC physics is identified. This is termed the electronic ideality factor, $n_{el}$, and (as opposed to the standard ideality factor) can be used to deduce the dominant source of recombination in a PSC, independent of its ionic properties.
△ Less
Submitted 24 May, 2021;
originally announced May 2021.
-
Efficient Modelling of Ion Structure and Dynamics in Inorganic Metal Halide Perovskites
Authors:
Salvador Rodriguez-Gomez Balestra,
Jose Manuel Vicent-Luna,
Sofia Calero,
Shuxia Tao,
Juan A. Anta
Abstract:
Metal halide perovskites (MHPs) are nowadays one of the most studied semiconductors due to their exceptional performance as active layers in solar cells. Although MHPs are excellent solid-state semiconductors, they are also ionic compounds, where ion migration plays a decisive role in their formation, their photovoltaic performance and their long-term stability. Given the above-mentioned complexit…
▽ More
Metal halide perovskites (MHPs) are nowadays one of the most studied semiconductors due to their exceptional performance as active layers in solar cells. Although MHPs are excellent solid-state semiconductors, they are also ionic compounds, where ion migration plays a decisive role in their formation, their photovoltaic performance and their long-term stability. Given the above-mentioned complexity, molecular dynamics simulations based on classical force fields are especially suited to study MHP properties, such as lattice dynamics and ion migration. In particular, the possibility to model mixed compositions is important since they are the most relevant to optimize the optical band gap and the stability. With this intention, we employ DFT calculations and a genetic algorithm to develop a fully transferable classical force field valid for the benchmark inorganic perovskite compositional set CsPb(Br_xI_(1-x))_3 (x = 0,1/3,2/3,1). The resulting force field reproduces correctly, with a common set of parameters valid for all compositions, the experimental lattice parameter as a function of bromide/iodide ratio, the ion-ion distances and the XRD spectra of the pure and mixed structures. The simulated thermal conductivities and ion migration activation energies of the pure compounds are also in good agreement with experimental trends. Our molecular dynamics simulations make it possible to predict the compositional dependence of the ionic diffusion coefficient on bromide/iodide ratio and vacancy concentration. For vacancy concentrations of around 9 10^21 cm^-3, we obtained ionic diffusion coefficients at ambient temperature of 10^-11 and 10^-13 cm2/s for CsPbBr3 and CsPbI3, respectively. Interestingly, in comparison with the pure compounds, we predict a significantly lower activation energy for vacancy migration and faster diffusion for the mixed perovskites.
△ Less
Submitted 20 March, 2020;
originally announced March 2020.
-
Deducing the key physical properties of a perovskite solar cell from its impedance response: insights from drift-diffusion modelling
Authors:
Antonio Riquelme,
Laurence J. Bennett,
Nicola E. Courtier,
Matthew J. Wolf,
Lidia Contreras-Bernal,
Alison Walker,
Giles Richardson,
Juan A. Anta
Abstract:
Interpreting the impedance response of perovskite solar cells (PSC) is significantly more challenging than for most other photovoltaics. This is for a variety of reasons, of which the most significant are the mixed ionic-electronic conduction properties of metal halide perovskites and the difficulty in fabricating stable, and reproducible, devices. Experimental studies, conducted on a variety of P…
▽ More
Interpreting the impedance response of perovskite solar cells (PSC) is significantly more challenging than for most other photovoltaics. This is for a variety of reasons, of which the most significant are the mixed ionic-electronic conduction properties of metal halide perovskites and the difficulty in fabricating stable, and reproducible, devices. Experimental studies, conducted on a variety of PSCs, produce a variety of impedance spectra shapes. However, they all possess common features, the most noteworthy of which is that they have at least two signals, at high and low frequency, with different characteristic responses to temperature, illumination and electrical bias. It is shown, by a combination of experiment and drift-diffusion modelling of the ion and charge carrier transport and recombination within the cell, that these common features are well reproduced by the simulation. In addition, we show that the high frequency response contains all the key information relating to the steady-state performance of a PSC, i.e. it is a signature of the recombination mechanisms and provides a measure of charge collection efficiency. Moreover, steady-state performance is significantly affected by the distribution of mobile ionic charge within the perovskite layer. Comparison between the electrical properties of different devices should therefore be made using high frequency impedance measurements performed in the steady-state voltage regime in which the cell is expected to operate.
△ Less
Submitted 16 March, 2020;
originally announced March 2020.
-
From Dye Sensitized to Perovskite Solar Cells, The Missing Link
Authors:
So-Min Yoo,
Seog Joon Yoon,
Juan A. Anta,
Hyo Joong Lee,
Pablo P. Boix,
Iván Mora-Seró
Abstract:
Fundamental working mechanisms of perovskite solar cells remain an elusive topic of research. Impedance Spectroscopy (IS) application to perovskite-based devices generates uncommon features and misleading outputs, mainly due to the lack of a stablished model for the interpretation of the results. In this work we control the perovskite precursor concentration to fabricate a series of perovskite-bas…
▽ More
Fundamental working mechanisms of perovskite solar cells remain an elusive topic of research. Impedance Spectroscopy (IS) application to perovskite-based devices generates uncommon features and misleading outputs, mainly due to the lack of a stablished model for the interpretation of the results. In this work we control the perovskite precursor concentration to fabricate a series of perovskite-based solar cells with different amounts of perovskite absorber. Low concentration devices present the well-known dye sensitized solar cell (DSSCs) impedance pattern. As the amount of perovskite is increased, the characteristic impedance spectra of thin-film perovskite solar cells (PSCs) arises. This transition is characterized by a change in the working principles, determined by an evolution of the dominant capacitance: from the intermediate frequency chemical capacitance of TiO2 in devices with isolated perovskite domains, to a large low-frequency capacitance signal which divides the spectra in two sections, yet with no direct influence in final device performance. This study allows to link experimentally, in terms of impedance behavior, PSCs with the rest of solar cell devices via DSSCs. We observe that it is not possible to assign a single physical origin to the different resistances determined in the impedance spectra except for the series resistance. In contrast, resistive element present contributions from different physical processes, observing a transport-recombination coupling. Based on this analysis we provide an equivalent circuit model to evaluate the impedance pattern of PSCs in terms of the processes directly affecting the final performance (i.e. considering transport-related and recombination-related losses), a crucial tool for further development of perovskite photovoltaics.
△ Less
Submitted 22 June, 2019; v1 submitted 28 May, 2019;
originally announced May 2019.
-
Water vapour pressure as determining control parameter to fabricate high efficiency perovskite solar cells at ambient conditions
Authors:
Lidia Contreras-Bernal,
Juan Jesus Gallardo,
Javier Navas,
Jesus Idigoras,
Juan A. Anta
Abstract:
Although perovskite solar cells have demonstrated impressive efficiencies in research labs (above 23%), there is a need of experimental procedures that allow their fabrication at ambient conditions, which would decrease substantially manufacturing costs. However, under ambient conditions, a delicate control of the moisture level in the atmosphere has to be enforced to achieve efficient and highly…
▽ More
Although perovskite solar cells have demonstrated impressive efficiencies in research labs (above 23%), there is a need of experimental procedures that allow their fabrication at ambient conditions, which would decrease substantially manufacturing costs. However, under ambient conditions, a delicate control of the moisture level in the atmosphere has to be enforced to achieve efficient and highly stable devices. In this work, we show that it is the absolute content of water measured in the form of partial water vapour pressure (WVP) the only determining control parameter that needs to be considered during preparation. Following this perspective, MAPbI3 perovskite films were deposited under different WVP by changing the relative humidity (RH) and the lab temperature. We found that efficient and reproducible devices can be obtained at given values of WVP. Furthermore, it is demonstrated that small temperature changes, at the same value of the RH, result in huge changes in performance, due to the non-linear dependence of the WVP on temperature. We have extended the procedure to accomplish high-efficient FA0.83MA0.17PbI3 devices at ambient conditions by adjusting DMSO proportion in precursor solution as a function of WVP only. As an example of the relevance of this paramater, a WVP value of around of 1.6 kPa appears to be an upper limit for safe fabrication of high efficiency devices at ambient conditions, regardless the RH and lab temperature.
△ Less
Submitted 12 February, 2019;
originally announced February 2019.
-
The structure of warm dense matter modeled with an average atom model with ion-ion correlations
Authors:
D. Saumon,
C. E. Starrett,
J. A. Anta,
W. Daughton,
G. Chabrier
Abstract:
We present a new model of warm dense matter that represents an intermediate approach between the relative simplicity of ''one-ion'' average atom models and the more realistic but computationally expensive ab initio simulation methods. Physical realism is achieved primarily by including the correlations in the plasma that surrounds a central ion. The plasma is described with the Ornstein-Zernike in…
▽ More
We present a new model of warm dense matter that represents an intermediate approach between the relative simplicity of ''one-ion'' average atom models and the more realistic but computationally expensive ab initio simulation methods. Physical realism is achieved primarily by including the correlations in the plasma that surrounds a central ion. The plasma is described with the Ornstein-Zernike integral equations theory of fluids, which is coupled to an average atom model for the central ion. In this contribution we emphasize the key elements and approximations and how they relate to and expand upon a typical average atom model. Besides being relatively inexpensive computationally, this approach offers several advantages over ab initio simulations but also has a number of limitations. The model is validated by comparisons with numerical solutions for the pair distribution function of the ions from ab initio simulations for several elements and a wide range of plasma conditions. Simulations results are reproduced remarkably well and simpler limiting theories are recovered as well. This model has many potential applications to calculation of the properties of warm dense matter such as the equation of state and conductivities for a wide range of temperatures and densities.
△ Less
Submitted 15 November, 2013;
originally announced November 2013.
-
Combining quantum and classical density functional theory for ion-electron mixtures
Authors:
A. A. Louis,
H. Xu,
J. A. Anta
Abstract:
We combine techniques from quantum and from classical density functional theory (DFT) to describe electron-ion mixtures. For homogeneous systems, we show how to calculate ion-ion and ion-electron correlation functions within Chihara's quantum hypernetted chain approximation, which we derive within a DFT formulation. We also sketch out how to apply the DFT formulation to inhomogeneous electron-io…
▽ More
We combine techniques from quantum and from classical density functional theory (DFT) to describe electron-ion mixtures. For homogeneous systems, we show how to calculate ion-ion and ion-electron correlation functions within Chihara's quantum hypernetted chain approximation, which we derive within a DFT formulation. We also sketch out how to apply the DFT formulation to inhomogeneous electron-ion mixtures, and use this to study the electron distribution at the liquid-solid interface of Al.
△ Less
Submitted 18 October, 2001;
originally announced October 2001.
-
Probing Ion-Ion and Electron-Ion Correlations in Liquid Metals within the Quantum Hypernetted Chain Approximation
Authors:
J. A. Anta,
A. A. Louis
Abstract:
We use the Quantum Hypernetted Chain Approximation (QHNC) to calculate the ion-ion and electron-ion correlations for liquid metallic Li, Be, Na, Mg, Al, K, Ca, and Ga. We discuss trends in electron-ion structure factors and radial distribution functions, and also calculate the free-atom and metallic-atom form-factors, focusing on how bonding effects affect the interpretation of X-ray scattering…
▽ More
We use the Quantum Hypernetted Chain Approximation (QHNC) to calculate the ion-ion and electron-ion correlations for liquid metallic Li, Be, Na, Mg, Al, K, Ca, and Ga. We discuss trends in electron-ion structure factors and radial distribution functions, and also calculate the free-atom and metallic-atom form-factors, focusing on how bonding effects affect the interpretation of X-ray scattering experiments, especially experimental measurements of the ion-ion structure factor in the liquid metallic phase.
△ Less
Submitted 7 September, 1999;
originally announced September 1999.
