-
Giant optomechanical coupling and dephasing protection with cavity exciton-polaritons
Authors:
P. Sesin,
A. S. Kuznetsov,
G. Rozas,
S. Anguiano,
A. E. Bruchhausen,
A. Lemaître,
K. Biermann,
P. V. Santos,
A. Fainstein
Abstract:
Electronic resonances can significantly enhance the photon-phonon coupling in cavity optomechanics, but are normally avoided due to absorption losses and dephasing by inhomogeneous broadening. We experimentally demonstrate that exciton-polaritons in semiconductor microcavities enable GHz optomechanics with single-particle resonant couplings reaching record values in the 10s of MHz range. Moreover,…
▽ More
Electronic resonances can significantly enhance the photon-phonon coupling in cavity optomechanics, but are normally avoided due to absorption losses and dephasing by inhomogeneous broadening. We experimentally demonstrate that exciton-polaritons in semiconductor microcavities enable GHz optomechanics with single-particle resonant couplings reaching record values in the 10s of MHz range. Moreover, this resonant enhancement is protected from inhomogeneous broadening by the Rabi gap. Single-polariton non-linearities and the optomechanical strong-coupling regime become accessible in this platform.
△ Less
Submitted 15 December, 2022;
originally announced December 2022.
-
Mass spectrometric investigations into 3D printed parts to assess radiopurity as ultralow background materials for rare event physics detectors
Authors:
Amanda D. French,
Sonia Alcantar Anguiano,
Mary Bliss,
Josef Christ,
Maria Laura di Vacri,
Rebecca Erikson,
Khadouja Harouaka,
Eric W. Hoppe,
Jay W. Grate,
Isaac J. Arnquist
Abstract:
New data are reported for polyvinylidene fluoride (PVDF), polyphenylene sulfide (PPS), and two forms of polyetherimide (PEI, branded ULTEM 1010 and 9085). Data for starting filaments and both simple and complex printed parts are reported. PVDF filaments and simple printed beads, were found to have values of approximately 30 and 50 ppt for Th-232 and U-238, respectively, while a more complex spring…
▽ More
New data are reported for polyvinylidene fluoride (PVDF), polyphenylene sulfide (PPS), and two forms of polyetherimide (PEI, branded ULTEM 1010 and 9085). Data for starting filaments and both simple and complex printed parts are reported. PVDF filaments and simple printed beads, were found to have values of approximately 30 and 50 ppt for Th-232 and U-238, respectively, while a more complex spring clip part had slightly elevated Th-232 levels of 65 ppt, with U-238 remaining at 50 ppt. PPS filament was found to have concentrations of 270 and 710 ppt for Th-232 and U-238, respectively, and were not chosen to be printed as those levels were already higher than other material options. ULTEM 1010 filaments and printed complex spring clip parts were found to have concentrations of around 5 and 7 ppt for Th-232 and U-238, respectively, illustrating no significant contamination from the printing process. ULTEM 9085 filaments were found to have concentrations of around 9 and 5 ppt for Th-232 and U-238, respectively, while the printed complex spring clip part was found to have slightly elevated concentrations of 25 and 7 ppt for Th-232 and U-238, respectively. These results were all obtained using a novel dry ashing method in crucibles constructed of ultralow background electroformed copper or, when applicable, microwave-assisted wet ashing digestion. Samples and process blanks were spiked with Th-229 and U-233 as internal standards prior to dry/wet ashing and determinations were made by inductively coupled plasma mass spectrometry (ICP-MS). In order to maintain high radiopurity levels, pre-cleaning the filaments before printing and post-cleaning the parts is recommended, although the printing process itself has shown to contribute very minute amounts of radiocontaminants.
△ Less
Submitted 27 July, 2022;
originally announced July 2022.
-
Cavity Optomechanics with a Laser Engineered Optical Trap
Authors:
P. Sesin,
S. Anguiano,
A. E. Bruchhausen,
A. Lemaître,
A. Fainstein
Abstract:
Laser engineered exciton-polariton networks could lead to dynamically configurable integrated optical circuitry and quantum devices. Combining cavity optomechanics with electrodynamics in laser configurable hybrid designs constitutes a platform for the vibrational control, conversion, and transport of signals. With this aim we investigate 3D optical traps laser-induced in quantum-well embedded sem…
▽ More
Laser engineered exciton-polariton networks could lead to dynamically configurable integrated optical circuitry and quantum devices. Combining cavity optomechanics with electrodynamics in laser configurable hybrid designs constitutes a platform for the vibrational control, conversion, and transport of signals. With this aim we investigate 3D optical traps laser-induced in quantum-well embedded semiconductor planar microcavities. We show that the laser generated and controlled discrete states of the traps dramatically modify the interaction between photons and phonons confined in the resonators, accessing through coupling of photoelastic origin $g_\mathrm{0}/2π\sim 1.7$ MHz an optomechanical cooperativity $C>1$ for mW excitation. The quenching of Stokes processes and double-resonant enhancement of anti-Stokes ones involving pairs of discrete optical states in the side-band resolved regime, allows the optomechanical cooling of 180 GHz bulk acoustic waves, starting from room temperature down to $\sim120$ K. These results pave the way for dynamical tailoring of optomechanical actuation in the extremely-high-frequency range (30-300 GHz) for future network and quantum technologies.
△ Less
Submitted 21 September, 2020;
originally announced September 2020.
-
Copper electroplating for background suppression in the NEWS-G experiment
Authors:
NEWS-G Collaboration,
:,
L. Balogh,
C. Beaufort,
A. Brossard,
R. Bunker,
J. -F. Caron,
M. Chapellier,
J. -M. Coquillat,
E. C. Corcoran,
S. Crawford,
A. Dastgheibi Fard,
Y. Deng,
K. Dering,
D. Durnford,
G. Gerbier,
I. Giomataris,
G. Giroux,
P. Gorel,
M. Gros,
P. Gros,
O. Guillaudin,
E. W. Hoppe,
I. Katsioulas,
F. Kelly
, et al. (26 additional authors not shown)
Abstract:
New Experiments with Spheres-Gas (NEWS-G) is a dark matter direct detection experiment that will operate at SNOLAB (Canada). Similar to other rare-event searches, the materials used in the detector construction are subject to stringent radiopurity requirements. The detector features a 140-cm diameter proportional counter comprising two hemispheres made from commercially sourced 99.99% pure copper.…
▽ More
New Experiments with Spheres-Gas (NEWS-G) is a dark matter direct detection experiment that will operate at SNOLAB (Canada). Similar to other rare-event searches, the materials used in the detector construction are subject to stringent radiopurity requirements. The detector features a 140-cm diameter proportional counter comprising two hemispheres made from commercially sourced 99.99% pure copper. Such copper is widely used in rare-event searches because it is readily available, there are no long-lived Cu radioisotopes, and levels of non-Cu radiocontaminants are generally low. However, measurements performed with a dedicated 210Po alpha counting method using an XIA detector confirmed a problematic concentration of 210Pb in bulk of the copper. To shield the proportional counter's active volume, a low-background electroforming method was adapted to the hemispherical shape to grow a 500-$μ$m thick layer of ultra-radiopure copper to the detector's inner surface. In this paper the process is described, which was prototyped at Pacific Northwest National Laboratory (PNNL), USA, and then conducted at full scale in the Laboratoire Souterrain de Modane in France. The radiopurity of the electroplated copper was assessed through Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Measurements of samples from the first (second) hemisphere give 68% confidence upper limits of <0.58 $μ$Bq/kg (<0.24 $μ$Bq/kg) and <0.26 $μ$Bq/kg (<0.11 $μ$Bq/kg) on the 232Th and 238U contamination levels, respectively. These results are comparable to previously reported measurements of electroformed copper produced for other rare-event searches, which were also found to have low concentration of 210Pb consistent with the background goals of the NEWS-G experiment.
△ Less
Submitted 13 December, 2020; v1 submitted 7 August, 2020;
originally announced August 2020.
-
Mass spectrometric analyses of high performance polymers to assess radiopurity as ultra low background materials for rare event physics detectors
Authors:
Jay W. Grate,
Isaac J. Arnquist,
Eric W. Hoppe,
Mary Bliss,
Khadouja Harouaka,
Maria Laura di Vacri,
Sonia Alcantar Anguiano
Abstract:
The mass concentrations of Th-232 and U-238 in several strong, unfilled, high performance polymers are reported as measures of their radiopurity. Highly radiopure polymers are required as dielectric materials in the construction of rare event physics detectors, in order to minimize background signals arising from the detector materials themselves. New data are reported for carefully sourced sample…
▽ More
The mass concentrations of Th-232 and U-238 in several strong, unfilled, high performance polymers are reported as measures of their radiopurity. Highly radiopure polymers are required as dielectric materials in the construction of rare event physics detectors, in order to minimize background signals arising from the detector materials themselves. New data are reported for carefully sourced samples of polyetheretherketone (PEEK), polyetherketoneketone (PEKK), a polyamide imide (PAI, branded as Torlon) and polybenzimidazole (PBI). Data for solid polyetherimide (PEI) are also discussed and new data for PEI in the form of a commercial 3D printing filament stock are reported. Strong high performance polymers PEKK, PBI, PAI and PEI were found with levels for Th-232 and U-238 that are below one milliBq/kg, including the PEI 3D printing filament. Specifically, for Th-232 and U-238 respectively, in microBq/kg, we found values of 149 and 184 for Arkema Kepstan PEKK 6002 flake; 69 and 2250 for Solvay Ketaspire PEEK flake; 346 and 291 for PBI Performance Products low metals grade 100 mesh PBI powder; 66 and 105 for Drake Plastics PAI Torlon T-4200 pellets; 401 and 285 for Drake Plastics cured PAI rod; 32 and 41 for Ensinger PEI Ultem 1000 solid; and 15 and 85 microBq/kg, for ThermaX PEI Ultem 1010 filament material. These results were all obtained using a novel dry ashing method in crucibles constructed of ultra low background (ULB) electroformed copper. Samples were spiked with T-229h and U-233 as internal standards prior to ashing and determinations were made by inductively coupled plasma mass spectrometry (ICP-MS). Radiopurity is displayed graphically relative to numerical measures of mechanical strength for these and several other polymers.
△ Less
Submitted 6 July, 2020;
originally announced July 2020.
-
Three dimensional trap** of light with light in semiconductor planar microcavities
Authors:
S. Anguiano,
A. A. Reynoso,
A. E. Bruchhausen,
A. Lemaitre,
J. Bloch,
A. Fainstein
Abstract:
When light is confined in all three directions and in dimensions of the order of the light wavelength, full discretization of the photon spectra and distinctive phenomena occur, the Purcell effect and the inhibition of emission of atoms being two paradigmatic examples. Diverse solid-state devices that confine light in all three dimensions have been developed and applied. Typically the confinement…
▽ More
When light is confined in all three directions and in dimensions of the order of the light wavelength, full discretization of the photon spectra and distinctive phenomena occur, the Purcell effect and the inhibition of emission of atoms being two paradigmatic examples. Diverse solid-state devices that confine light in all three dimensions have been developed and applied. Typically the confinement volume, operating wavelength, and quality factor of these resonators are set by construction, and small variations of these characteristics with external perturbations are targeted for applications including light modulation and control. Here we describe full 3D light trap**, that is set and tuned by laser excitation in an all-optical scheme. The proposed device is based on a planar distributed Bragg reflector GaAs semiconductor microcavity operated at room temperature. Lateral confinement is generated with an attractive effective photonic potential tailored by the increase in the cavity spacer refractive index, induced by carriers photoexcited by a focused laser. Strong three dimensional trap** of light is evidenced by the laser-induced changes on the spectral, spatial, and k-space distribution of the emission. The dynamics of the laser induced photonic potential is studied using modulated optical excitation, highlighting the central role of thermal effects at the origin of the observed phenomena.
△ Less
Submitted 17 July, 2019; v1 submitted 18 December, 2018;
originally announced December 2018.
-
Quantum well photoelastic comb for ultra-high frequency cavity optomechanics
Authors:
V. Villafañe,
S. Anguiano,
A. E. Bruchhausen,
G. Rozas,
J. Bloch,
C. Gomez Carbonell,
A. Lemaître,
A. Fainstein
Abstract:
Optomechanical devices operated at their quantum limit open novel perspectives for the ultrasensitive determination of mass and displacement, and also in the broader field of quantum technologies. The access to higher frequencies implies operation at higher temperatures and stronger immunity to environmental noise. We propose and demonstrate here a new concept of quantum well photoelastic comb for…
▽ More
Optomechanical devices operated at their quantum limit open novel perspectives for the ultrasensitive determination of mass and displacement, and also in the broader field of quantum technologies. The access to higher frequencies implies operation at higher temperatures and stronger immunity to environmental noise. We propose and demonstrate here a new concept of quantum well photoelastic comb for the efficient coupling of light to optomechanical resonances at hundreds of GHz in semiconductor hybrid resonators. A purposely designed ultra-high resolution Raman spectroscopy set-up is exploited to evidence the transfer of spectral weight from the mode at 60 GHz to modes at 190-230 GHz, corresponding to the $8^{th}$ and $10^{th}$ overtone of the fundamental breathing mode of the light-sound cavities. The coupling to mechanical frequencies two orders of magnitude larger than alternative approaches is attained without reduction of the optomechanical constant $g_0$. The wavelength dependence of the optomechanical coupling further proves the role of resonant photoelastic interaction, highlighting the potentiality to access strong-coupling regimes. The experimental results show that electrostrictive forces allow for the design of devices optimized to selectively couple to specific mechanical modes. Our proposal opens up exciting opportunities towards the implementation of novel approaches applicable in quantum and ultra-high frequency information technologies.
△ Less
Submitted 19 December, 2018; v1 submitted 29 August, 2018;
originally announced August 2018.
-
Optoelectronic forces with quantum wells for cavity optomechanics in GaAs/AlAs semiconductor microcavities
Authors:
V. Villafañe,
P. Sesin,
P. Soubelet,
S. Anguiano,
A. E. Bruchhausen,
G. Rozas,
C. Gomez Carbonell,
A. Lemaître,
A. Fainstein
Abstract:
Radiation pressure, electrostriction, and photothermal forces have been investigated to evidence backaction, non-linearities and quantum phenomena in cavity optomechanics. We show here through a detailed study of the relative intensity of the cavity mechanical modes observed when exciting with pulsed lasers close to the GaAs optical gap that optoelectronic forces involving real carrier excitation…
▽ More
Radiation pressure, electrostriction, and photothermal forces have been investigated to evidence backaction, non-linearities and quantum phenomena in cavity optomechanics. We show here through a detailed study of the relative intensity of the cavity mechanical modes observed when exciting with pulsed lasers close to the GaAs optical gap that optoelectronic forces involving real carrier excitation and deformation potential interaction are the strongest mechanism of light-to-sound transduction in semiconductor GaAs/AlAs distributed Bragg reflector optomechanical resonators. We demonstrate that the ultrafast spatial redistribution of the photoexcited carriers in microcavities with massive GaAs spacers leads to an enhanced coupling to the fundamental 20 GHz vertically polarized mechanical breathing mode. The carrier diffusion along the growth axis of the device can be enhanced by increasing the laser power, or limited by embedding GaAs quantum wells in the cavity spacer, a strategy used here to prove and engineer the optoelectronic forces in phonon generation with real carriers. The wavelength dependence of the observed phenomena provide further proof of the role of optoelectronic forces. The optical forces associated to the different intervening mechanisms and their relevance for dynamical backaction in optomechanics are evaluated using finite-element methods. The results presented open the path to the study of hitherto seldom investigated dynamical backaction in optomechanical solid-state resonators in the presence of optoelectronic forces.
△ Less
Submitted 23 March, 2018; v1 submitted 26 September, 2017;
originally announced September 2017.
-
Optomechanical properties of GaAs/AlAs micropillar resonators operating in the 18 GHz range
Authors:
F. R. Lamberti,
Q. Yao,
L. Lanco,
D. T. Nguyen,
M. Esmann,
A. Fainstein,
P. Sesin,
S. Anguiano,
V. Villafañe,
A. Bruchhausen,
P. Senellart,
I. Favero,
N. D. Lanzillotti-Kimura
Abstract:
Recent experiments demonstrated that GaAs-AlAs based micropillar cavities are promising systems for quantum optomechanics, allowing the simultaneous three-dimensional confinement of near-infrared photons and acoustic phonons in the 18-100 GHz range. Here, we investigate through numerical simulations the optomechanical properties of this new platform. We evidence how the Poisson's ratio and semicon…
▽ More
Recent experiments demonstrated that GaAs-AlAs based micropillar cavities are promising systems for quantum optomechanics, allowing the simultaneous three-dimensional confinement of near-infrared photons and acoustic phonons in the 18-100 GHz range. Here, we investigate through numerical simulations the optomechanical properties of this new platform. We evidence how the Poisson's ratio and semiconductor-vacuum boundary conditions lead to very distinct features in the mechanical and optical three dimensional confinement. We find a strong dependence of the mechanical quality factor and strain distribution on the micropillar radius, in great contrast to what is predicted and observed in the optical domain. The derived optomechanical coupling constants g_0 reach ultra-large values in the 10^6 rad/s range.
△ Less
Submitted 26 July, 2017;
originally announced July 2017.
-
Time-Resolved Cavity Nano-Optomechanics in the 20-100 GHz range
Authors:
S. Anguiano,
A. E. Bruchhausen,
B. Jusserand,
I. Favero,
F. R. Lamperti,
L. Lanco,
I. Sagnes,
A. Lemaître,
N. D. Lanzillotti-Kimura,
P. Senellart,
A. Fainstein
Abstract:
Applications of cavity optomechanics span from gravitational wave detection to the study of quantum motion states in mesoscopic mechanical systems. The engineering of resonators supporting strongly interacting mechanical and optical modes is central to these developments. However, current technological and experimental approaches limit the accessible mechanical frequencies to a few GHz, imposing h…
▽ More
Applications of cavity optomechanics span from gravitational wave detection to the study of quantum motion states in mesoscopic mechanical systems. The engineering of resonators supporting strongly interacting mechanical and optical modes is central to these developments. However, current technological and experimental approaches limit the accessible mechanical frequencies to a few GHz, imposing hard constraints on quantum mechanical studies. Here we demonstrate the optical control of 20-100~GHz mechanical modes confined in the three dimensions within semiconductor nano-optomechanical pillar cavities. We use a time-resolved transient optical reflectivity technique and access both the energy spectrum and dynamics of the mechanical modes at the picosecond timescale. A strong increase of the optomechanical coupling upon reducing the pillar size is observed together with unprecedent room temperature Q-frequency products above $10^{14}$. The measurements also reveal sideband generation in the optomechanical response. Such resonators can naturally integrate quantum wells and quantum dots, enabling novel applications in cavity quantum electrodynamics and high frequency nanomechanics.
△ Less
Submitted 13 October, 2016;
originally announced October 2016.
