-
Alignment-induced depression and shear thinning of anisotropic granular media
Authors:
Huzaif Rahim,
Vasileios Angelidakis,
Thorsten Pöschel,
Sudeshna Roy
Abstract:
When granular materials of shape-anisotropic grains are sheared in a split-bottom shear cell, a localized shear band is formed with a depression at its center. This effect is closely related to the alignment of the particles with aspect ratio (AR), which, in turn, influences the local packing density, the stress distribution, and the system's overall bulk rheology. Particles with large AR tend to…
▽ More
When granular materials of shape-anisotropic grains are sheared in a split-bottom shear cell, a localized shear band is formed with a depression at its center. This effect is closely related to the alignment of the particles with aspect ratio (AR), which, in turn, influences the local packing density, the stress distribution, and the system's overall bulk rheology. Particles with large AR tend to align with the shear direction, which increases the packing density in the shear band and affects rheological properties like stress, macroscopic friction coefficient, and effective viscosity. A scaling law correlates particle AR to macroscopic friction and effective viscosity, revealing shear-thinning behavior in bulk and near the surface.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Combined thermal and particle shape effects on powder spreading in additive manufacturing via discrete element simulations
Authors:
Sudeshna Roy,
Hongyi Xiao,
Vasileios Angelidakis,
Thorsten Pöschel
Abstract:
The thermal and mechanical behaviors of powders are important for various additive manufacturing technologies. For powder bed fusion, capturing the temperature profile and the packing structure of the powders prior to melting is challenging due to both the various pathways of heat transfer and the complicated properties of powder system. Furthermore, these two effects can be coupled due to the tem…
▽ More
The thermal and mechanical behaviors of powders are important for various additive manufacturing technologies. For powder bed fusion, capturing the temperature profile and the packing structure of the powders prior to melting is challenging due to both the various pathways of heat transfer and the complicated properties of powder system. Furthermore, these two effects can be coupled due to the temperature dependence of particle properties. This study addresses this challenge using a discrete element model that simulates non-spherical particles with thermal properties in powder spreading. Thermal conduction and radiation are introduced to a multi-sphere particle formulation for capturing the heat transfer among irregular-shaped powders, which have temperature-dependent elastic properties. The model is utilized to simulate the spreading of pre-heated PA12 powder through a hot substrate representing the part under manufacturing. Differences in the temperature profiles were found in the spreading cases with different particle shapes, spreading speed, and temperature dependence of the elastic moduli. The temperature of particles below the spreading blade is found to be dependent on the kinematics of the heap of particles in front, which eventually is influenced by the temperature-dependent properties of the particles.
△ Less
Submitted 23 February, 2024;
originally announced February 2024.
-
SPIRAL: An Efficient Algorithm for the Integration of the Equation of Rotational Motion
Authors:
Carlos Andrés del Valle,
Vasileios Angelidakis,
Sudeshna Roy,
José Daniel Muñoz,
Thorsten Pöschel
Abstract:
We introduce Spiral, a third-order integration algorithm for the rotational motion of extended bodies. It requires only one force calculation per time step, does not require quaternion normalization at each time step, and can be formulated for both leapfrog and synchronous integration schemes, making it compatible with many particle simulation codes. The stability and precision of Spiral exceed th…
▽ More
We introduce Spiral, a third-order integration algorithm for the rotational motion of extended bodies. It requires only one force calculation per time step, does not require quaternion normalization at each time step, and can be formulated for both leapfrog and synchronous integration schemes, making it compatible with many particle simulation codes. The stability and precision of Spiral exceed those of state-of-the-art algorithms currently used in popular DEM codes such as Yade, MercuryDPM, LIGGGHTS, PFC, and more, at only slightly higher computational cost. Also, beyond DEM, we see potential applications in all numerical simulations that involve the 3D rotation of extended bodies.
△ Less
Submitted 7 November, 2023;
originally announced November 2023.
-
Shear zones in granular mixtures of hard and soft particles with high and low friction
Authors:
Aditya Pratap Singh,
Vasileios Angelidakis,
Thorsten Pöschel,
Sudeshna Roy
Abstract:
Granular materials show inhomogeneous flows characterized by strain localization. When strain is localized in a sheared granular material, rigid regions of a nearly undeformed state are separated by shear bands, where the material yields and flows. The characteristics of the shear bands are determined by the geometry of the system, the micromechanical material properties, and the kinematics at the…
▽ More
Granular materials show inhomogeneous flows characterized by strain localization. When strain is localized in a sheared granular material, rigid regions of a nearly undeformed state are separated by shear bands, where the material yields and flows. The characteristics of the shear bands are determined by the geometry of the system, the micromechanical material properties, and the kinematics at the particle level. For a split-bottom shear cell, recent experimental work has shown that mixtures of hard, frictional and soft, nearly frictionless particles exhibit wider shear zones than samples with only one of the two components. To explain this finding, we investigate the shear zone properties and the stress response of granular mixtures using discrete element simulations. We show that both interparticle friction and elastic modulus determine the shear-band properties of granular mixtures of various mixing ratios, but their stress response depends strongly on the interparticle friction. Our study provides a fundamental understanding of the micromechanics of shear band formation in granular mixtures.
△ Less
Submitted 6 November, 2023;
originally announced November 2023.
-
DEM simulation of the powder application in powder bed fusion
Authors:
Vasileios Angelidakis,
Michael Blank,
Eric J. R. Parteli,
Sudeshna Roy,
Daniel Schiochet Nasato,
Hongyi Xiao,
Thorsten Poeschel
Abstract:
The packing behavior of powders is significantly influenced by various types of inter-particle attractive forces, including adhesion and non-bonded van der Waals forces [1, 2, 3, 4, 5, 6]. Alongside particle size and shape distributions, the inter-particle interactions, in particular frictional and adhesive forces, play a crucial role in determining the flow behavior and consequently the packing d…
▽ More
The packing behavior of powders is significantly influenced by various types of inter-particle attractive forces, including adhesion and non-bonded van der Waals forces [1, 2, 3, 4, 5, 6]. Alongside particle size and shape distributions, the inter-particle interactions, in particular frictional and adhesive forces, play a crucial role in determining the flow behavior and consequently the packing density of the powder layer. The impact of various types of attractive forces on the packing density of powders with different materials and particle size distributions remains largely unexplored and requires further investigation. Accurately comprehending these effects through experiments while considering specific particle size distributions and material properties poses significant challenges. To address these challenges, we employ Discrete Element Method (DEM) simulations to characterize the packing behavior of fine powders. We can demonstrate quantitative agreement with experimental results by incorporating the appropriate particle size distribution and using an adequate model of attractive particle interactions. Furthermore, our findings indicate that both adhesion, which is modeled using the Johnson-Kendall-Roberts (JKR) model [7], and van der Waals interactions are crucial factors that must be taken into account in DEM simulations.
△ Less
Submitted 21 October, 2023;
originally announced October 2023.
-
Structural fluctuations in thin cohesive particle layers in powder-based additive manufacturing
Authors:
Sudeshna Roy,
Hongyi Xiao,
Vasileios Angelidakis,
Thorsten Pöschel
Abstract:
Producing dense and homogeneous powder layers with smooth free surface is challenging in additive manufacturing, as interparticle cohesion can strongly affect the powder packing structure and therefore influence the quality of the end product. We use the Discrete Element Method to simulate the spreading process of spherical powders and examine how cohesion influences the characteristics of the pac…
▽ More
Producing dense and homogeneous powder layers with smooth free surface is challenging in additive manufacturing, as interparticle cohesion can strongly affect the powder packing structure and therefore influence the quality of the end product. We use the Discrete Element Method to simulate the spreading process of spherical powders and examine how cohesion influences the characteristics of the packing structure with a focus on the fluctuation of the local morphology. As cohesion increases, the overall packing density decreases, and the free surface roughness increases, which is calculated from digitized surface height distributions. Local structural fluctuations for both quantities are examined through the local packing anisotropy on the particle scale, obtained from Voronoï tessellation. The distributions of these particle-level metrics quantify the increasingly heterogeneous packing structure with clustering and changing surface morphology.
△ Less
Submitted 21 October, 2023;
originally announced October 2023.
-
Rigid Clumps in the MercuryDPM Particle Dynamics Code
Authors:
Igor Ostanin,
Vasileios Angelidakis,
Timo Plath,
Sahar Pourandi,
Anthony Thornton,
Thomas Weinhart
Abstract:
Discrete particle simulations have become the standard in science and industrial applications exploring the properties of particulate systems. Most of such simulations rely on the concept of interacting spherical particles to describe the properties of particulates, although, the correct representation of the nonspherical particle shape is crucial for a number of applications. In this work we desc…
▽ More
Discrete particle simulations have become the standard in science and industrial applications exploring the properties of particulate systems. Most of such simulations rely on the concept of interacting spherical particles to describe the properties of particulates, although, the correct representation of the nonspherical particle shape is crucial for a number of applications. In this work we describe the implementation of clumps, i.e. assemblies of rigidly connected spherical particles, which can approximate given nonspherical shapes, within the \textit{MercuryDPM} particle dynamics code. \textit{MercuryDPM} contact detection algorithm is particularly efficient for polydisperse particle systems, which is essential for multilevel clumps approximating complex surfaces. We employ the existing open-source \texttt{CLUMP} library to generate clump particles. We detail the pre-processing tools providing necessary initial data, as well as the necessary adjustments of the algorithms of contact detection, collision/migration and numerical time integration. The capabilities of our implementation are illustrated for a variety of examples.
△ Less
Submitted 31 October, 2023; v1 submitted 8 October, 2023;
originally announced October 2023.
-
Yade Documentation
Authors:
Vaclav Smilauer,
Vasileios Angelidakis,
Emanuele Catalano,
Robert Caulk,
Bruno Chareyre,
William Chevremont,
Sergei Dorofeenko,
Jerome Duriez,
Nolan Dyck,
Jan Elias,
Burak Er,
Alexander Eulitz,
Anton Gladky,
Ning Guo,
Christian Jakob,
Francois Kneib,
Janek Kozicki,
Donia Marzougui,
Raphael Maurin,
Chiara Modenese,
Gary Pekmezi,
Luc Scholtes,
Luc Sibille,
Jan Stransky,
Thomas Sweijen
, et al. (2 additional authors not shown)
Abstract:
Yade is an extensible open-source framework for discrete numerical models, focused on the Discrete Element Method. The computation parts are written in c++ using a flexible object model and allowing independent implementation of new algorithms and interfaces. Python is used for rapid and concise scene construction, simulation control, postprocessing and debugging. Yade is located at yade-dem.org,…
▽ More
Yade is an extensible open-source framework for discrete numerical models, focused on the Discrete Element Method. The computation parts are written in c++ using a flexible object model and allowing independent implementation of new algorithms and interfaces. Python is used for rapid and concise scene construction, simulation control, postprocessing and debugging. Yade is located at yade-dem.org, which contains this documentation. Development is kindly hosted on launchpad and GitLab ; they are used for source code, bug tracking and source downloads and more. Building, regression tests and packages distribution are hosted on servers of the Grenoble Geomechanics group at Laboratoire 3SR, UMS Gricad and Gdańsk University of Technology. Yade supports high precision calculations and Python 3. The development branch is on GitLab.
△ Less
Submitted 2 January, 2023;
originally announced January 2023.
