-
Sensing enhancement of a Fabry-Perot THz cavity using switchable VO2 mirrors
Authors:
Gian Paolo Papari,
Anna Lucia Pellegrino,
Graziella Malandrino,
Antonello Andreone
Abstract:
We experimentally investigate the sensing properties of an open cavity operating in the THz regime and realized by employing as mirrors two thin vanadium dioxide (VO2) films grown on silicon parallel plates and separated by a variable length. The phase transition of VO2 is used to control the behavior of the system between two different responses: a high transmission mode to the incident radiation…
▽ More
We experimentally investigate the sensing properties of an open cavity operating in the THz regime and realized by employing as mirrors two thin vanadium dioxide (VO2) films grown on silicon parallel plates and separated by a variable length. The phase transition of VO2 is used to control the behavior of the system between two different responses: a high transmission mode to the incident radiation (VO2 in the insulating state) and a high sensitivity to tiny changes in the cavity refractive index (VO2 in the conducting state). In the first state, the low loss regime enables to adjust the cavity length and easily optimize the resonances due to the Fabry-Perot (FP) effect in the Si plates and in the cavity volume. The activation of the metallic-like state instead, by dam** the FP oscillations in the plates, promotes the onset of a comb-like spectrum that can be exploited as a versatile tool for accurate sensing applications. Using both an analytical model and full-wave simulations, we estimate the device response to variation in the refractive index of the cavity volume, showing that the proposed structure can achieve sensitivity values among the highest reported for THz sensors.
△ Less
Submitted 2 February, 2022;
originally announced February 2022.
-
Effective EMI shielding behaviour of thin graphene/PMMA nanolaminates in the THz range
Authors:
Christos Pavlou,
Maria Giovanna Pastore Carbone,
Anastasios C Manikas,
George Trakakis,
Can Koral,
Gianpaolo Papari,
Antonello Andreone,
Costas Galiotis
Abstract:
The use of graphene in a form of discontinuous flakes in polymer composites limits the full exploitation of the unique properties of graphene, thus requiring high filler loadings for achieving - for example - satisfactory electrical and mechanical properties. Herein centimetre-scale CVD graphene/polymer nanolaminates have been produced by using an iterative 'lift-off/float-on' process and have bee…
▽ More
The use of graphene in a form of discontinuous flakes in polymer composites limits the full exploitation of the unique properties of graphene, thus requiring high filler loadings for achieving - for example - satisfactory electrical and mechanical properties. Herein centimetre-scale CVD graphene/polymer nanolaminates have been produced by using an iterative 'lift-off/float-on' process and have been found to outperform, for the same graphene content, state-of-the-art flake-based graphene polymer composites in terms of mechanical reinforcement and electrical properties. Most importantly these thin laminate materials show a high electromagnetic interference (EMI) shielding effectiveness, reaching 60 dB for a small thickness of 33 micron, and an absolute EMI shielding effectiveness close to 3* 10 ^5 dB cm ^2 g^-1 which is amongst the highest values for synthetic, non-metallic materials produced to date.
△ Less
Submitted 23 August, 2021;
originally announced August 2021.
-
Thermoplastic polyurethane-graphene nanoplatelets microcellular foams for electromagnetic interference shielding
Authors:
Maria Giovanna Pastore Carbone,
Maxime Beaugendre,
Can Koral,
Anastasios C. Manikas,
Nikolaos Koutroumanis,
Gian Paolo Papari,
Antonello Andreone,
Ernesto Di Maio,
Costas Galiotis
Abstract:
The incorporation of graphene-related materials as nanofiller can produce multifunctional foams with enhanced specific properties and density reduction. Herein we report on the preparation of microcellular thermoplastic polyurethane/graphene foams by batch foaming. Solution blending was first adopted to disperse graphene nanoplatelets (GNP) in the elastomeric matrix. Then, a foaming process based…
▽ More
The incorporation of graphene-related materials as nanofiller can produce multifunctional foams with enhanced specific properties and density reduction. Herein we report on the preparation of microcellular thermoplastic polyurethane/graphene foams by batch foaming. Solution blending was first adopted to disperse graphene nanoplatelets (GNP) in the elastomeric matrix. Then, a foaming process based on the use of supercritical CO2 was adopted to produce the microcellular TPU/GNP composite foams with graphene content up to 1 wt%. The EMI shielding behaviour of the TPU/GNP foams has been assessed in the THz range, and has revealed their potential in comparison with other graphene-filled foams presented in the literature, that exhibit similar specific shielding effectiveness but at much higher content of graphene-related materials (10-30 wt%).
△ Less
Submitted 23 August, 2021;
originally announced August 2021.
-
Isotropic properties of the photonic band gap in quasicrystals with low-index contrast
Authors:
Priya Rose,
E. Di Gennaro,
G. Abbate,
A. Andreone
Abstract:
We report on the formation and development of the photonic band gap in two-dimensional 8-, 10- and 12-fold symmetry quasicrystalline lattices of low index contrast. Finite size structures made of dielectric cylindrical rods were studied and measured in the microwave region, and their properties compared with a conventional hexagonal crystal. Band gap characteristics were investigated by changing t…
▽ More
We report on the formation and development of the photonic band gap in two-dimensional 8-, 10- and 12-fold symmetry quasicrystalline lattices of low index contrast. Finite size structures made of dielectric cylindrical rods were studied and measured in the microwave region, and their properties compared with a conventional hexagonal crystal. Band gap characteristics were investigated by changing the direction of propagation of the incident beam inside the crystal. Various angles of incidence from 0 \degree to 30\degree were used in order to investigate the isotropic nature of the band gap. The arbitrarily high rotational symmetry of aperiodically ordered structures could be practically exploited to manufacture isotropic band gap materials, which are perfectly suitable for hosting waveguides or cavities.
△ Less
Submitted 26 February, 2011;
originally announced February 2011.
-
Experimental evidence of cut-wire-induced enhanced transmission of transverse-electric fields through sub-wavelength slits in a thin metallic screen
Authors:
Emiliano Di Gennaro,
Ilaria Gallina,
Antonello Andreone,
Giuseppe Castaldi,
Vincenzo Galdi
Abstract:
Recent numerical studies have demonstrated the possibility of achieving substantial enhancements in the transmission of transverse-electric-polarized electromagnetic fields through subwavelength slits in a thin metallic screen by placing single or paired metallic cut-wire arrays at a close distance from the screen. In this Letter, we report on the first experimental evidence of such extraordinary…
▽ More
Recent numerical studies have demonstrated the possibility of achieving substantial enhancements in the transmission of transverse-electric-polarized electromagnetic fields through subwavelength slits in a thin metallic screen by placing single or paired metallic cut-wire arrays at a close distance from the screen. In this Letter, we report on the first experimental evidence of such extraordinary transmission phenomena, via microwave (X/Ku-band) measurements on printed-circuit-board prototypes. Experimental results agree very well with full-wave numerical predictions, and indicate an intrinsic robustness of the enhanced transmission phenomena with respect to fabrication tolerances and experimental imperfections.
△ Less
Submitted 28 October, 2010; v1 submitted 26 August, 2010;
originally announced August 2010.
-
Paired cut-wire arrays for enhanced transmission of transverse-electric fields through sub-wavelength slits in a thin metallic screen
Authors:
Ilaria Gallina,
Giuseppe Castaldi,
Vincenzo Galdi,
Emiliano Di Gennaro,
Antonello Andreone
Abstract:
It has recently been shown that the transmission of electromagnetic fields through sub-wavelength slits (parallel to the electric field direction) in a thin metallic screen can be greatly enhanced by covering one side of the screen with a metallic cut-wire array laid on a dielectric layer. In this Letter, we show that a richer phenomenology (which involves both electric- and magnetic-type resonanc…
▽ More
It has recently been shown that the transmission of electromagnetic fields through sub-wavelength slits (parallel to the electric field direction) in a thin metallic screen can be greatly enhanced by covering one side of the screen with a metallic cut-wire array laid on a dielectric layer. In this Letter, we show that a richer phenomenology (which involves both electric- and magnetic-type resonances) can be attained by pairing a second cut-wire array at the other side of the screen. Via a full-wave comprehensive parametric study, we illustrate the underlying mechanisms and explore the additional degrees of freedom endowed, as well as their possible implications in the engineering of enhanced transmission phenomena.
△ Less
Submitted 18 June, 2010; v1 submitted 21 December, 2009;
originally announced December 2009.
-
First critical field measurements of superconducting films by third harmonic analysis
Authors:
G. Lamura,
M. Aurino,
A. Andreone,
J. C. Villegier
Abstract:
The temperature behaviour of the first critical field ($B_{C1}$) of superconducting thin film samples can be determined with high accuracy using an inductive and contactless method. Driving a sinusoidal current in a single coil placed in front of the sample, a non zero third harmonic voltage $V_{3}$ is induced in it when Abrikosov vortices enter the sample. Conditions to be satisfied for the qua…
▽ More
The temperature behaviour of the first critical field ($B_{C1}$) of superconducting thin film samples can be determined with high accuracy using an inductive and contactless method. Driving a sinusoidal current in a single coil placed in front of the sample, a non zero third harmonic voltage $V_{3}$ is induced in it when Abrikosov vortices enter the sample. Conditions to be satisfied for the quantitative evaluation of $B_{C1}$ using this technique are detailed. As validation test, different type II superconductors (Nb, NbN, MgB$_{2}$ and Y$_{1}$Ba$_{2}$Cu$_{3}$O$_{7-d}$ under the form of thin films) have been measured. The comparison between experimental results, data presented in literature and theoretical predictions is presented and discussed.
△ Less
Submitted 14 August, 2009;
originally announced August 2009.
-
Hybrid photonic-bandgap accelerating cavities
Authors:
E. Di Gennaro,
C. Zannini,
S. Savo,
A. Andreone,
M. R. Masullo,
G. Castaldi,
I. Gallina,
V. Galdi
Abstract:
In a recent investigation, we studied two-dimensional point-defected photonic bandgap cavities composed of dielectric rods arranged according to various representative periodic and aperiodic lattices, with special emphasis on possible applications to particle acceleration (along the longitudinal axis). In this paper, we present a new study aimed at highlighting the possible advantages of using h…
▽ More
In a recent investigation, we studied two-dimensional point-defected photonic bandgap cavities composed of dielectric rods arranged according to various representative periodic and aperiodic lattices, with special emphasis on possible applications to particle acceleration (along the longitudinal axis). In this paper, we present a new study aimed at highlighting the possible advantages of using hybrid structures based on the above dielectric configurations, but featuring metallic rods in the outermost regions, for the design of extremely-high quality factor, bandgap-based, accelerating resonators. In this framework, we consider diverse configurations, with different (periodic and aperiodic) lattice geometries, sizes, and dielectric/metal fractions. Moreover, we also explore possible improvements attainable via the use of superconducting plates to confine the electromagnetic field in the longitudinal direction. Results from our comparative studies, based on numerical full-wave simulations backed by experimental validations (at room and cryogenic temperatures) in the microwave region, identify the candidate parametric configurations capable of yielding the highest quality factor.
△ Less
Submitted 2 October, 2009; v1 submitted 3 August, 2009;
originally announced August 2009.
-
Bandgap properties of low index contrast aperiodically ordered photonic quasicrystals
Authors:
Gianluigi Zito,
T. Priya Rose,
Emiliano Di Gennaro,
Antonello Andreone,
Enrico Santamato,
Giancarlo Abbate
Abstract:
We numerically analyze, using Finite Difference Time Domain simulations, the bandgap properties of photonic quasicrystals with a low index contrast. We compared 8-, 10- and 12-fold symmetry aperiodically ordered lattices with different spatial tiling. Our results show that tiling design, more than symmetry, determines the transmission properties of these structures.
We numerically analyze, using Finite Difference Time Domain simulations, the bandgap properties of photonic quasicrystals with a low index contrast. We compared 8-, 10- and 12-fold symmetry aperiodically ordered lattices with different spatial tiling. Our results show that tiling design, more than symmetry, determines the transmission properties of these structures.
△ Less
Submitted 22 July, 2009;
originally announced July 2009.
-
Superlensing properties of one-dimensional dielectric photonic crystals
Authors:
Salvatore Savo,
Emiliano Di Gennaro,
Antonello Andreone
Abstract:
We present the experimental observation of the superlensing effect in a slab of a one-dimensional photonic crystal made of tilted dielectric elements. We show that this flat lens can achieve subwavelength resolution in different frequency bands. We also demonstrate that the introduction of a proper corrugation on the lens surface can dramatically improve both the transmission and the resolution…
▽ More
We present the experimental observation of the superlensing effect in a slab of a one-dimensional photonic crystal made of tilted dielectric elements. We show that this flat lens can achieve subwavelength resolution in different frequency bands. We also demonstrate that the introduction of a proper corrugation on the lens surface can dramatically improve both the transmission and the resolution of the imaged signal.
△ Less
Submitted 22 July, 2009;
originally announced July 2009.
-
Mode Confinement in Photonic Quasi-Crystal Point-Defect Cavities for Particle Accelerators
Authors:
E. Di Gennaro,
S. Savo,
A. Andreone,
V. Galdi,
G. Castaldi,
V Pierro,
M. R. Masullo
Abstract:
In this Letter, we present a study of the confinement properties of point-defect resonators in finite-size photonic-bandgap structures composed of aperiodic arrangements of dielectric rods, with special emphasis on their use for the design of cavities for particle accelerators. Specifically, for representative geometries, we study the properties of the fundamental mode (as a function of the fill…
▽ More
In this Letter, we present a study of the confinement properties of point-defect resonators in finite-size photonic-bandgap structures composed of aperiodic arrangements of dielectric rods, with special emphasis on their use for the design of cavities for particle accelerators. Specifically, for representative geometries, we study the properties of the fundamental mode (as a function of the filling fraction, structure size, and losses) via 2-D and 3-D full-wave numerical simulations, as well as microwave measurements at room temperature. Results indicate that, for reduced-size structures, aperiodic geometries exhibit superior confinement properties by comparison with periodic ones.
△ Less
Submitted 29 September, 2008;
originally announced September 2008.
-
Pendellosung effect in photonic crystals
Authors:
S. Savo,
E. Di Gennaro,
C. Miletto,
A. Andreone,
P. Dardano,
L. Moretti,
V. Mocella
Abstract:
At the exit surface of a photonic crystal, the intensity of the diffracted wave can be periodically modulated, showing a maximum in the "positive" (forward diffracted) or in the "negative" (diffracted) direction, depending on the slab thickness. This thickness dependence is a direct result of the so-called Pendellosung phenomenon, consisting of the periodic exchange inside the crystal of the ene…
▽ More
At the exit surface of a photonic crystal, the intensity of the diffracted wave can be periodically modulated, showing a maximum in the "positive" (forward diffracted) or in the "negative" (diffracted) direction, depending on the slab thickness. This thickness dependence is a direct result of the so-called Pendellosung phenomenon, consisting of the periodic exchange inside the crystal of the energy between direct and diffracted beams. We report the experimental observation of this effect in the microwave region at about 14 GHz by irradiating 2D photonic crystal slabs of different thickness and detecting the intensity distribution of the electromagnetic field at the exit surface and inside the crystal itself.
△ Less
Submitted 10 April, 2008;
originally announced April 2008.
-
Evidence of local effects in anomalous refraction and focusing properties of dodecagonal photonic quasicrystals
Authors:
Emiliano Di Gennaro,
Carlo Miletto,
Salvatore Savo,
Antonello Andreone,
Davide Morello,
Vincenzo Galdi,
Giuseppe Castaldi,
Vincenzo Pierro
Abstract:
We present the key results from a comprehensive study of the refraction and focusing properties of a two-dimensional dodecagonal photonic ``quasicrystal'' (PQC), carried out via both full-wave numerical simulations and microwave measurements on a slab made of alumina rods inserted in a parallel-plate waveguide. We observe anomalous refraction and focusing in several frequency regions, confirming…
▽ More
We present the key results from a comprehensive study of the refraction and focusing properties of a two-dimensional dodecagonal photonic ``quasicrystal'' (PQC), carried out via both full-wave numerical simulations and microwave measurements on a slab made of alumina rods inserted in a parallel-plate waveguide. We observe anomalous refraction and focusing in several frequency regions, confirming some recently published results. However, our interpretation, based on numerical and experimental evidence, differs substantially from the one in terms of ``effective negative refractive-index'' that was originally proposed. Instead, our study highlights the critical role played by short-range interactions associated with local order and symmetry.
△ Less
Submitted 11 April, 2008; v1 submitted 10 April, 2008;
originally announced April 2008.
-
A parametric study of the lensing properties of dodecagonal photonic quasicrystals
Authors:
E. Di Gennaro,
D. Morello,
C. Miletto,
S. Savo,
A. Andreone,
G. Castaldi,
V. Galdi,
V. Pierro
Abstract:
We present a study of the lensing properties of two-dimensional (2-D) photonic quasicrystal (PQC) slabs made of dielectric cylinders arranged according to a 12-fold-symmetric square-triangle aperiodic tiling. Our full-wave numerical analysis confirms the results recently emerged in the technical literature and, in particular, the possibility of achieving focusing effects within several frequency…
▽ More
We present a study of the lensing properties of two-dimensional (2-D) photonic quasicrystal (PQC) slabs made of dielectric cylinders arranged according to a 12-fold-symmetric square-triangle aperiodic tiling. Our full-wave numerical analysis confirms the results recently emerged in the technical literature and, in particular, the possibility of achieving focusing effects within several frequency regions. However, contrary to the original interpretation, such focusing effects turn out to be critically associated to local symmetry points in the PQC slab, and strongly dependent on its thickness and termination. Nevertheless, our study reveals the presence of some peculiar properties, like the ability to focus the light even for slabs with a reduced lateral width, or beaming effects, which render PQC slabs potentially interesting and worth of deeper investigation. Key words: Photonic quasicrystals; negative refraction; superlensing.
△ Less
Submitted 5 December, 2007; v1 submitted 27 November, 2007;
originally announced November 2007.
-
Linear and nonlinear electrodynamic response of bulk CaC6 in the microwave regime
Authors:
A. Andreone,
G. Cifariello,
E. Di Gennaro,
G. Lamura,
N. Emery,
C. Herold,
J. F. Mareche,
P. Lagrange
Abstract:
The linear and nonlinear response to a microwave electromagnetic field of two c-axis oriented polycrystalline samples of the newly discovered superconductor CaC6 (Tc = 11.5 K) is studied in the superconducting state down to 2 K. The surface resistance Rs and the third order intermodulation distortion, arising from a two-tone excitation, have been measured as a function of temperature and microwa…
▽ More
The linear and nonlinear response to a microwave electromagnetic field of two c-axis oriented polycrystalline samples of the newly discovered superconductor CaC6 (Tc = 11.5 K) is studied in the superconducting state down to 2 K. The surface resistance Rs and the third order intermodulation distortion, arising from a two-tone excitation, have been measured as a function of temperature and microwave circulating power. Experiments are carried out using a dielectrically loaded copper cavity operating at 7 GHz in a "hot finger" configuration. The results confirm recent experimental findings that CaC6 behaves as a weakly-coupled, fully gapped, superconductor. The weak power dependence of Rs encourages a further investigation of this novel superconductor as a possible alternative to Nb in specific microwave applications.
△ Less
Submitted 18 October, 2006;
originally announced October 2006.
-
Microwave losses of bulk CaC6
Authors:
G. Cifariello,
E. Di Gennaro,
G. Lamura,
A. Andreone,
N. Emery,
C. Herold,
J. F. Mareche,
P. Lagrange
Abstract:
We report a study of the temperature dependence of the surface resistance RS in the graphite intercalated compound (GIC) CaC6, where superconductivity at 11.5 K was recently discovered. Experiments are carried out using a copper dielectrically loaded cavity operating at 7 GHz in a "hot finger" configuration. Bulk CaC6 samples have been synthesized from highly oriented pyrolytic graphite. Microwa…
▽ More
We report a study of the temperature dependence of the surface resistance RS in the graphite intercalated compound (GIC) CaC6, where superconductivity at 11.5 K was recently discovered. Experiments are carried out using a copper dielectrically loaded cavity operating at 7 GHz in a "hot finger" configuration. Bulk CaC6 samples have been synthesized from highly oriented pyrolytic graphite. Microwave data allows to extract unique information on the quasiparticle density and on the nature of pairing in superconductors. The analysis of RS(T) confirms our recent experimental findings that CaC6 behaves as a weakly-coupled, fully gapped, superconductor.
△ Less
Submitted 23 June, 2006;
originally announced June 2006.
-
Intrinsic nonlinearity probed by intermodulation distortion microwave measurements on high quality MgB2 thin films
Authors:
G. Cifariello,
M. Aurino,
E. Di Gennaro,
G. Lamura,
A. Andreone,
P. Orgiani,
X. X. Xi,
J. -C. Villegier
Abstract:
The two tone intermodulation distortion arising in MgB2 thin films synthesized by hybrid physical-chemical vapour deposition is studied in order to probe the influence of the two bands on the nonlinear response of this superconductor. The measurements are carried out by using a dielectrically loaded copper cavity operating at 7 GHz. Microwave data on samples having critical temperatures above 41…
▽ More
The two tone intermodulation distortion arising in MgB2 thin films synthesized by hybrid physical-chemical vapour deposition is studied in order to probe the influence of the two bands on the nonlinear response of this superconductor. The measurements are carried out by using a dielectrically loaded copper cavity operating at 7 GHz. Microwave data on samples having critical temperatures above 41 K, very low resistivity values, and residual resistivity ratio larger than 10, are shown. The dependence of the nonlinear surface losses and of the third order intermodulation products on the power feeding the cavity and on the temperature is analyzed. At low power, the signal arising from distortion versus temperature shows the intrinsic s-wave behavior expected for this compound. Data are compared with measurements performed on Nb and YBCO thin films using the same technique.
△ Less
Submitted 14 February, 2006;
originally announced February 2006.
-
Experimental evidence of s-wave superconductivity in bulk CaC$_{6}$
Authors:
G. Lamura,
M. Aurino,
G. Cifariello,
E. Di Gennaro,
A. Andreone,
N. Emery,
C. Herold,
J. -F. Mareche,
P. Lagrange
Abstract:
The temperature dependence of the in-plane magnetic penetration depth, $λ_{ab}(T)$, has been measured in a c-axis oriented polycrystalline CaC$_{6}$ bulk sample using a high-resolution mutual inductance technique. A clear exponential behavior of $λ_{ab}(T)$ has been observed at low temperatures, strongly suggesting isotropic s-wave pairing. Data fit using the standard BCS theory yields…
▽ More
The temperature dependence of the in-plane magnetic penetration depth, $λ_{ab}(T)$, has been measured in a c-axis oriented polycrystalline CaC$_{6}$ bulk sample using a high-resolution mutual inductance technique. A clear exponential behavior of $λ_{ab}(T)$ has been observed at low temperatures, strongly suggesting isotropic s-wave pairing. Data fit using the standard BCS theory yields $λ_{ab}(0)=(720\pm 80)$ Angstroem and $Δ(0)=(1.79\pm 0.08)$ meV. The ratio $2Δ(0)/k_{_B}T_{c}=(3.6\pm 0.2)$ gives indication for a conventional weakly coupled superconductor.
△ Less
Submitted 16 January, 2006;
originally announced January 2006.
-
Discrete model analysis of the critical current density measurements in superconducting thin films by a single coil inductive method
Authors:
M. Aurino,
E. Di Gennaro,
F. Di Iorio,
A. Gauzzi,
G. Lamura,
A. Andreone
Abstract:
The critical current density of a superconducting film can be easily determined by an inductive and contactless method. Driving a sinusoidal current in a single coil placed in front of a superconducting sample, a non zero third harmonic voltage V_3 is induced in it when the sample goes beyond the Bean critical state. The onset of V_3 marks the value of current beyond which the sample response to…
▽ More
The critical current density of a superconducting film can be easily determined by an inductive and contactless method. Driving a sinusoidal current in a single coil placed in front of a superconducting sample, a non zero third harmonic voltage V_3 is induced in it when the sample goes beyond the Bean critical state. The onset of V_3 marks the value of current beyond which the sample response to the magnetic induction is no more linear. To take into account, in a realistic way, the magnetic coupling between the film and the coil we have developed a discrete model of the inducing and induced currents distribution. In the framework of this model the magnetic field profile on the sample surface and the coefficient linking the current flowing in the coil and the critical current density J_C of superconducting thin films is evaluated. The numerical results are checked measuring J_C of several thin films of YBa_2Cu_3O_(7-d) of known superconducting properties, used as a control material.
△ Less
Submitted 21 November, 2005;
originally announced November 2005.
-
Microwave intermodulation distortion of MgB2 thin films
Authors:
G. Lamura,
A. J. Purnell,
L. F. Cohen,
A. Andreone,
F. Chiarella,
E. Di Gennaro,
R. Vaglio,
L. Hao,
J. Gallop
Abstract:
The two tone intermodulation arising in MgB2 thin films deposited in-situ by planar magnetron sputtering on sapphire substrates is studied. Samples are characterised using an open-ended dielectric puck resonator operating at 8.8 GHz. The experimental results show that the third order products increase with the two-tone input power with a slope ranging between 1.5 and 2.3. The behaviour can be un…
▽ More
The two tone intermodulation arising in MgB2 thin films deposited in-situ by planar magnetron sputtering on sapphire substrates is studied. Samples are characterised using an open-ended dielectric puck resonator operating at 8.8 GHz. The experimental results show that the third order products increase with the two-tone input power with a slope ranging between 1.5 and 2.3. The behaviour can be understood introducing a mechanism of vortex penetration in grain boundaries as the most plausible source of non linearities in these films. This assumption is confirmed by the analysis of the field dependence of the surface resistance, that show a linear behaviour at all temperatures under test.
△ Less
Submitted 9 May, 2003; v1 submitted 8 May, 2003;
originally announced May 2003.
-
Electrodynamic response of MgB2 sintered pellets and thin films
Authors:
A. Andreone,
G. Ausanio,
E. Di Gennaro,
G. Lamura,
M. Salluzzo,
J. Le Cochec,
A. Gauzzi,
C. Cantoni,
M. Paranthaman,
G. Giunchi,
S. Ceresara
Abstract:
We present a study of the electrodynamic response of MgB2 pellets and thin film samples exhibiting critical temperatures ranging between 26 and 38 K. We have performed accurate measurements of the surface impedance ZS =RS+iXS as a function of the temperature and of the magnitude of the electromagnetic field. The temperature variation and the field dependence of ZS was measured by a dielectric re…
▽ More
We present a study of the electrodynamic response of MgB2 pellets and thin film samples exhibiting critical temperatures ranging between 26 and 38 K. We have performed accurate measurements of the surface impedance ZS =RS+iXS as a function of the temperature and of the magnitude of the electromagnetic field. The temperature variation and the field dependence of ZS was measured by a dielectric resonator cavity technique in the microwave region. In particular, the temperature variation of the magnetic penetration depth was also determined in the RF region by a single coil mutual inductance method. In the case of the films, for T<TC/2 a clear exponential behavior of the penetration depth is observed, which can be explained by a simple BCS s-wave model with a reduced value of the energy gap. On the contrary, pellets show no evidence of saturation, and the experimental results strictly follow a quadratic dependence down to the lowest temperatures. This behavior can be induced by the presence of metallic Mg inclusions that may locally depress the gap. The analysis of the field dependence of the surface impedance in the microwave region confirms that the electrodynamic response of MgB2 is dominated by different sources of dissipation, depending on the sample history, likely to be ascribed to the predominance of grain boundaries or normal regions on its surface.
△ Less
Submitted 31 October, 2001;
originally announced October 2001.
-
Study of the microwave electrodynamic response of MgB2 thin films
Authors:
A. Andreone,
A. Cassinese,
C. Cantoni,
E. Di Gennaro,
G. Lamura,
M. G. Maglione,
M. Paranthaman,
M. Salluzzo,
R. Vaglio
Abstract:
We present a study on the power dependence of the microwave surface impedance in thin films of the novel superconductor MgB2. 500 nm thick samples exhibiting critical temperatures ranging between 26 and 38 K are synthesized by an ex-situ post-anneal of e-beam evaporated boron in the presence of an Mg vapor at 900 C. Preliminary results on films grown in situ by a high rate magnetron sputtering t…
▽ More
We present a study on the power dependence of the microwave surface impedance in thin films of the novel superconductor MgB2. 500 nm thick samples exhibiting critical temperatures ranging between 26 and 38 K are synthesized by an ex-situ post-anneal of e-beam evaporated boron in the presence of an Mg vapor at 900 C. Preliminary results on films grown in situ by a high rate magnetron sputtering technique from stoichiometric MgB2 and Mg targets are also reported. Microwave measurements have been carried out employing a dielectrically loaded niobium superconducting cavity operating at 19.8 GHz and 4 K. The study shows that the electrodynamic response of MgB2 films is presently dominated by extrinsic sources of dissipation, appearing already at low microwave power, likely to be ascribed to the presence of grain boundaries and normal inclusions in the samples.
△ Less
Submitted 27 September, 2001; v1 submitted 25 September, 2001;
originally announced September 2001.
-
Superconducting gap anisotropy of LuNi2B2C thin films from microwave surface impedance measurements
Authors:
A. Andreone,
A. Cassinese,
L. Gianni,
M. Iavarone,
F. Palomba,
R. Vaglio
Abstract:
Surface impedance measurements of LuNi2B2C superconducting thin films as a function of temperature have been performed down to 1.5 K and at 20 GHz using a dielectric resonator technique. The magnetic penetration depth closely reproduces the standard B.C.S. result, but with a reduced value of the energy gap at low temperature. These data provide evidence for an anisotropic s-wave character of the…
▽ More
Surface impedance measurements of LuNi2B2C superconducting thin films as a function of temperature have been performed down to 1.5 K and at 20 GHz using a dielectric resonator technique. The magnetic penetration depth closely reproduces the standard B.C.S. result, but with a reduced value of the energy gap at low temperature. These data provide evidence for an anisotropic s-wave character of the order parameter symmetry in LuNi2B2C. From the evaluation of the real part of complex conductivity, we have observed constructive (type II) coherence effects in the electromagnetic absorption below Tc.
△ Less
Submitted 5 March, 2001;
originally announced March 2001.
