Showing 1–12 of 12 results for author: Anderson, M H

Soliton Microcomb Generation in a III-V Photonic Crystal Cavity

Authors: Alberto Nardi, Alisa Davydova, Nikolai Kuznetsov, Miles H. Anderson, Charles Möhl, Johann Riemensberger, Paul Seidler, Tobias J. Kippenberg

Abstract: Photonic crystals, material structures in which the dielectric function varies periodically in one, two, or three dimensions, can provide exquisite control over the propagation and confinement of light. By tailoring their band structure, exceptional optical effects can be achieved, such as slow light propagation or, through the creation of photonic bandgaps, optical cavities with both a high quali… ▽ More Photonic crystals, material structures in which the dielectric function varies periodically in one, two, or three dimensions, can provide exquisite control over the propagation and confinement of light. By tailoring their band structure, exceptional optical effects can be achieved, such as slow light propagation or, through the creation of photonic bandgaps, optical cavities with both a high quality factor and a small mode volume. Photonic crystal cavities have been used to realize compact nano-lasers and achieve strong coupling to quantum emitters, such as semiconductor quantum dots, color centers, or cold atoms. A useful attribute of photonic crystals is the ability to create chirped mirrors. Chir** has underpinned advances in ultra-fast lasers based on bulk mirrors, but has yet to be fully exploited in integrated photonics, where it could provide a means to engineer otherwise unattainable dispersion profiles for a range of nonlinear optical applications, including soliton frequency comb generation. The vast majority of integrated resonators for frequency combs make use of microring geometries, where only waveguide width and height are varied to engineer dispersion. Generation of frequency combs has been demonstrated with one-dimensional photonic crystal cavities made of silicon nitride, but the low index contrast prevents formation of broad soliton combs. We overcome these challenges by using a photonic-crystal Fabry-Pérot resonator made of gallium phosphide, a material with a high refractive index and a Kerr nonlinearity 200 times larger than that of silicon nitride. We employ chirped photonic crystal mirrors to provide anomalous dispersion. With subharmonic pulsed pum** at an average power of 23.6 mW, we are able to access stable dissipative Kerr frequency combs. We demonstrate soliton formation with a 3-dB bandwidth of 3.0 THz, corresponding to a pulse duration of 60 fs. △ Less

Submitted 27 April, 2023; v1 submitted 25 April, 2023; originally announced April 2023.

Comments: 22 pages, 16 figures

Dissipative solitons and switching waves in dispersion folded Kerr cavities

Authors: Miles H. Anderson, Alexey Tikan, Aleksandr Tusnin, Johann Riemensberger, Rui Ning Wang, Tobias J. Kippenberg

Abstract: We theoretically and experimentally investigate the formation of dissipative coherent structures in Kerr nonlinear optical microresonators, whose integrated dispersion exceeds the free-spectral range. We demonstrate that the presence of any periodic modulation along the resonator's circumference, such as periodically varying dispersion, can excite higher-order comb structures. We explore the outco… ▽ More We theoretically and experimentally investigate the formation of dissipative coherent structures in Kerr nonlinear optical microresonators, whose integrated dispersion exceeds the free-spectral range. We demonstrate that the presence of any periodic modulation along the resonator's circumference, such as periodically varying dispersion, can excite higher-order comb structures. We explore the outcomes of coherent microcomb generation in both cases of anomalous and normal dispersion. We are able to access this regime in microresonators via the high peak power of synchronous pulse-driving. For solitons in anomalous dispersion, we observe the formation of higher-order phase-matched dispersive waves (`Kelly-like' sidebands), where the folded dispersion crosses the frequency comb grid. In normal dispersion, we see the coexistence of switching wave fronts with Faraday instability-induced period-doubling patterns, manifesting as powerful satellite microcombs highly separated either side of the core microcomb while sharing the same repetition rate. This regime of dispersion-modulated phase matching opens a dimension of Kerr cavity physics and microcomb generation, particularly for the spectral extension and tuneability of microcombs in normal dispersion. △ Less

Submitted 20 May, 2022; originally announced May 2022.

Comments: Supplementary information will be added to posting in coming days

Infrared Optical Spectroscopy of Molten Fluorides: Methods, Electronic and Vibrational Data, Structural Interpretation, and Relevance to Radiative Heat Transfer

Authors: Will B. Derdeyn, Sara Mastromarino, Ruchi Gakhar, Mark H. Anderson, Mikhail A. Kats, Raluca O. Scarlat

Abstract: To help address the need for predicting radiative heat transfer (RHT) behavior of molten salts, we conducted a comprehensive review of methods and data from infrared optical spectroscopic measurements on molten fluoride salts. Transmittance, reflectance, and trans-reflectance experimental methods are discussed, along with the corresponding data reduction methodology and the limitations of each tec… ▽ More To help address the need for predicting radiative heat transfer (RHT) behavior of molten salts, we conducted a comprehensive review of methods and data from infrared optical spectroscopic measurements on molten fluoride salts. Transmittance, reflectance, and trans-reflectance experimental methods are discussed, along with the corresponding data reduction methodology and the limitations of each technique. Optical spectroscopy is a convenient indirect probe for changes in structural parameters with temperature and composition. Electronic and vibrational absorption data for transition-metal, lanthanide, and actinide solutes and vibrational absorption data for alkali and alkaline earth fluoride solvents are compiled, and the corresponding structural interpretation is discussed and compared with other experimental and theoretical work. We find that solvent and solute vibrational absorption can be significant in the mid-infrared, resulting in near-infrared edges of significance to RHT. Extrapolation and averaging of existing edge data leads to estimated gray absorption coefficient values at 700 degrees C of 493 m^(-1) for FLiBe and 148 m^(-1) for FLiNaK, both within the range of 1 to 6000 m^(-1) identified to be of engineering relevance for radiative heat transfer analysis. △ Less

Submitted 29 March, 2022; originally announced March 2022.

Comments: Review article

Coherent terahertz-to-microwave link using electro-optic-modulated Turing rolls

Authors: Wenle Weng, Miles H. Anderson, Anat Siddharth, Jijun He, Arslan S. Raja, Tobias J. Kippenberg

Abstract: Arising from modulation instability, Turing rolls in optical Kerr microresonators have been used in the generation of optical frequency combs and the synthesis of microwave and terahertz frequencies. In this work, by applying electro-optic modulation on terahertz-frequency Turing rolls, we implement electro-optic frequency division with a microcomb to synthesize variable low-noise microwave signal… ▽ More Arising from modulation instability, Turing rolls in optical Kerr microresonators have been used in the generation of optical frequency combs and the synthesis of microwave and terahertz frequencies. In this work, by applying electro-optic modulation on terahertz-frequency Turing rolls, we implement electro-optic frequency division with a microcomb to synthesize variable low-noise microwave signals. We also actively stabilize the terahertz oscillations to a microwave reference via intracavity power modulation, obtaining fractional frequency instabilities that are better than those of the free-running situation by up to six orders of magnitude. This study not only highlights the extraordinary spectral purity of Turing roll oscillations but also opens the way for bidirectional terahertz-to-microwave links with hybrid optical frequency comb techniques. △ Less

Submitted 6 July, 2021; originally announced July 2021.

Journal ref: Phys. Rev. A 104, 023511 (2021)

Platicon microcomb generation using laser self-injection locking

Authors: Grigory Lihachev, Junqiu Liu, Wenle Weng, Lin Chang, Joel Guo, Jijun He, Rui Ning Wang, Miles H. Anderson, John E. Bowers, Tobias J. Kippenberg

Abstract: The past decade has witnessed major advances in the development of microresonator-based frequency combs (microcombs) that are broadband optical frequency combs with repetition rates in the millimeter-wave to microwave domain. Integrated microcombs can be manufactured using wafer-scale process and have been applied in numerous applications. Most of these advances are based on the harnessing of diss… ▽ More The past decade has witnessed major advances in the development of microresonator-based frequency combs (microcombs) that are broadband optical frequency combs with repetition rates in the millimeter-wave to microwave domain. Integrated microcombs can be manufactured using wafer-scale process and have been applied in numerous applications. Most of these advances are based on the harnessing of dissipative Kerr solitons (DKS) in optical microresonators with anomalous group velocity dispersion (GVD). However, microcombs can also be generated with normal GVD using dissipative localized structures that are referred to as "dark pulse", "switching wave" or "platicon". Importantly, as most materials feature intrinsic normal GVD, the requirement of dispersion engineering is significantly relaxed for platicon generation. Therefore while DKS microcombs require particular designs and fabrication processes, platicon microcombs can be readily built using standard CMOS-compatible platforms such as thin-film (i.e. typically below 300 nm) Si3N4. Yet laser self-injection locking that has been recently used to create highly compact integrated DKS microcomb modules has not been demonstrated for platicons. Here we report the first fully integrated platicon microcomb operating at a microwave-K-band repetition rate. Using laser self-injection locking of a DFB laser edge-coupled to a Si3N4 microresonator, platicons are electrically initiated and stably maintained, enabling a compact microcomb module without any complex control. We further characterize the phase noise of the platicon repetition rate and the pum** laser. The observation of self-injection-locked platicons facilitates future wide adoption of microcombs as a build-in block in standard photonic integrated architectures via commercial foundry service. △ Less

Submitted 26 July, 2021; v1 submitted 13 March, 2021; originally announced March 2021.

Correcting thermal-emission-induced detector saturation in infrared reflection or transmission spectroscopy

Authors: C. Yao, H. Mei, Y. Xiao, A. Shahsafi, W. Derdeyn, J. L. King, C. Wan, R. O. Scarlat, M. H. Anderson, M. A. Kats

Abstract: We found that temperature-dependent infrared spectroscopy measurements (i.e., reflectance or transmittance) using a Fourier-transform spectrometer can have substantial errors, especially for elevated sample temperatures and collection using an objective lens (e.g., using an infrared microscope). These errors arise as a result of partial detector saturation due to thermal emission from the measured… ▽ More We found that temperature-dependent infrared spectroscopy measurements (i.e., reflectance or transmittance) using a Fourier-transform spectrometer can have substantial errors, especially for elevated sample temperatures and collection using an objective lens (e.g., using an infrared microscope). These errors arise as a result of partial detector saturation due to thermal emission from the measured sample reaching the detector, resulting in nonphysical apparent reduction of reflectance or transmittance with increasing sample temperature. Here, we demonstrate that these temperature-dependent errors can be corrected by implementing several levels of optical attenuation that enable "convergence testing" of the measured reflectance or transmittance as the thermal-emission signal is reduced, or by applying correction factors that can be inferred by looking at the spectral regions where the sample is not expected to have a substantial temperature dependence. △ Less

Submitted 25 March, 2021; v1 submitted 29 December, 2020; originally announced December 2020.

Zero-dispersion Kerr solitons in optical microresonators

Authors: Miles H. Anderson, Grigory Lihachev, Wenle Weng, Junqiu Liu, Tobias J. Kippenberg

Abstract: Solitons are shape preserving waveforms that are ubiquitous across nonlinear dynamical systems and fall into two separate classes, that of bright solitons, formed in the anomalous group velocity dispersion regime, and `dark solitons' in the normal dispersion regime. Both types of soliton have been observed in BEC, hydrodynamics, polaritons, and mode locked lasers, but have been particularly releva… ▽ More Solitons are shape preserving waveforms that are ubiquitous across nonlinear dynamical systems and fall into two separate classes, that of bright solitons, formed in the anomalous group velocity dispersion regime, and `dark solitons' in the normal dispersion regime. Both types of soliton have been observed in BEC, hydrodynamics, polaritons, and mode locked lasers, but have been particularly relevant to the generation of chipscale microresonator-based frequency combs (microcombs), used in numerous system level applications in timing, spectroscopy, and communications. For microcombs, both bright solitons, and alternatively dark pulses based on interlocking switching waves, have been studied. Yet, the existence of localized dissipative structures that fit between this dichotomy has been theoretically predicted, but proven experimentally elusive. Here we report the discovery of dissipative structures that embody a hybrid between switching waves and dissipative solitons, existing in the regime of (nearly) vanishing group velocity dispersion where third-order dispersion is dominant, hence termed as `zero-dispersion solitons'. These dissipative structures are formed via collapsing switching wave fronts, forming clusters of quantized solitonic sub-structures. The switching waves are formed directly via synchronous pulse-driving of a photonic chip-based Si3N4 microresonator. The resulting frequency comb spectrum is extremely broad in both the switching wave and zero-dispersion soliton regime, reaching 136 THz or 97% of an octave. Fourth-order dispersion engineering results in dual-dispersive wave formation, and a novel quasi-phase matched wave related to Faraday instability. This exotic unanticipated dissipative structure expands the domain of Kerr cavity physics to the regime near zero-dispersion and could present a superior alternative to conventional solitons for broadband comb generation. △ Less

Submitted 1 September, 2020; v1 submitted 28 July, 2020; originally announced July 2020.

Comments: 11 pages, 6 figures. 1 video as supplementary information. 1 Supplementary Information Document

Monolithic piezoelectric control of soliton microcombs

Authors: Junqiu Liu, Hao Tian, Erwan Lucas, Arslan S. Raja, Grigory Lihachev, Rui Ning Wang, Jijun He, Tianyi Liu, Miles H. Anderson, Wenle Weng, Sunil A. Bhave, Tobias J. Kippenberg

Abstract: High-speed laser frequency actuation is critical in all applications employing lasers and frequency combs, and is prerequisite for phase locking, frequency stabilization and stability transfer among multiple optical carriers. Soliton microcombs have emerged as chip-scale, broadband and low-power-consumption frequency comb sources.Yet, integrated microcombs relying on thermal heaters for on-chip ac… ▽ More High-speed laser frequency actuation is critical in all applications employing lasers and frequency combs, and is prerequisite for phase locking, frequency stabilization and stability transfer among multiple optical carriers. Soliton microcombs have emerged as chip-scale, broadband and low-power-consumption frequency comb sources.Yet, integrated microcombs relying on thermal heaters for on-chip actuation all exhibit only kilohertz actuation bandwidth. Consequently, high-speed actuation and locking of microcombs have been attained only with off-chip bulk modulators. Here, we present high-speed microcomb actuation using integrated components. By monolithically integrating piezoelectric AlN actuators on ultralow-loss Si3N4 photonic circuits, we demonstrate voltage-controlled soliton tuning, modulation and stabilization. The integrated AlN actuators feature bi-directional tuning with high linearity and low hysteresis, operate with 300 nW power and exhibit flat actuation response up to megahertz frequency, significantly exceeding bulk piezo tuning bandwidth. We use this novel capability to demonstrate a microcomb engine for parallel FMCW LiDAR, via synchronously tuning the laser and microresonator. By applying a triangular sweep at the modulation rate matching the frequency spacing of HBAR modes, we exploit the resonant build-up of bulk acoustic energy to significantly lower the required driving to a CMOS voltage of only 7 Volts. Our approach endows soliton microcombs with integrated, ultralow-power-consumption, and fast actuation, significantly expanding the repertoire of technological applications. △ Less

Submitted 28 January, 2020; v1 submitted 18 December, 2019; originally announced December 2019.

Journal ref: Nature 583, 385 (2020)

Photonic chip-based resonant supercontinuum

Authors: Miles H. Anderson, Romain Bouchand, Junqiu Liu, Wenle Weng, Ewelina Obrzud, Tobias Herr, Tobias J. Kippenberg

Abstract: Supercontinuum generation in optical fibers is one of the most dramatic nonlinear effects discovered, allowing short pulses to be converted into multi-octave spanning coherent spectra. However, generating supercontinua that are both coherent and broadband requires pulses that are simultaneously ultrashort with high peak power. This results in a reducing efficiency with increasing pulse repetition… ▽ More Supercontinuum generation in optical fibers is one of the most dramatic nonlinear effects discovered, allowing short pulses to be converted into multi-octave spanning coherent spectra. However, generating supercontinua that are both coherent and broadband requires pulses that are simultaneously ultrashort with high peak power. This results in a reducing efficiency with increasing pulse repetition rate, that has hindered supercontinua at microwave line spacing, i.e. 10s of GHz. Soliton microcombs by contrast, can generate octave-spanning spectra, but with good conversion efficiency only at vastly higher repetition rates in the 100s of GHz. Here, we bridge this efficiency gap with resonant supercontinuum, allowing supercontinuum generation using input pulses with an ultra-low 6 picojoule energy, and duration of 1 picosecond, 10-fold longer than what is typical. By applying synchronous pulse-driving to a dispersion-engineered, low-loss Si$_3$N$_4$ photonic chip microresonator, we generate dissipative Kerr solitons with a strong dispersive wave, both bound to the input pulse. This creates a smooth, flattened 2,200 line frequency comb, with an electronically detectable repetition rate of 28 GHz, constituting the largest bandwidth-line-count product for any microcomb generated to date. Strikingly, we observe that solitons exist in a weakly bound state with the input pulse, stabilizing their repetition rate, but simultaneously allowing noise transfer from one to the other to be suppressed even for offset frequencies 100 times lower than the linear cavity decay rate. We demonstrate that this nonlinear filtering can be enhanced by pulse-driving asynchronously, in order to preserve the coherence of the comb. Taken together, our work establishes resonant supercontinuum as a promising route to broadband and coherent spectra. △ Less

Submitted 23 March, 2020; v1 submitted 30 August, 2019; originally announced September 2019.

A Microphotonic Astrocomb

Authors: E. Obrzud, M. Rainer, A. Harutyunyan, M. H. Anderson, M. Geiselmann, B. Chazelas, S. Kundermann, S. Lecomte, M. Cecconi, A. Ghedina, E. Molinari, F. Pepe, F. Wildi, F. Bouchy, T. J. Kippenberg, T. Herr

Abstract: One of the essential prerequisites for detection of Earth-like extra-solar planets or direct measurements of the cosmological expansion is the accurate and precise wavelength calibration of astronomical spectrometers. It has already been realized that the large number of exactly known optical frequencies provided by laser frequency combs ('astrocombs') can significantly surpass conventionally used… ▽ More One of the essential prerequisites for detection of Earth-like extra-solar planets or direct measurements of the cosmological expansion is the accurate and precise wavelength calibration of astronomical spectrometers. It has already been realized that the large number of exactly known optical frequencies provided by laser frequency combs ('astrocombs') can significantly surpass conventionally used hollow-cathode lamps as calibration light sources. A remaining challenge, however, is generation of frequency combs with lines resolvable by astronomical spectrometers. Here we demonstrate an astrocomb generated via soliton formation in an on-chip microphotonic resonator ('microresonator') with a resolvable line spacing of 23.7 GHz. This comb is providing wavelength calibration on the 10 cm/s radial velocity level on the GIANO-B high-resolution near-infrared spectrometer. As such, microresonator frequency combs have the potential of providing broadband wavelength calibration for the next-generation of astronomical instruments in planet-hunting and cosmological research. △ Less

Submitted 27 December, 2017; originally announced December 2017.

Microresonator solitons for massively parallel coherent optical communications

Authors: Pablo Marin-Palomo, Juned N. Kemal, Maxim Karpov, Arne Kordts, Joerg Pfeifle, Martin H. P. Pfeiffer, Philipp Trocha, Stefan Wolf, Victor Brasch, Miles H. Anderson, Ralf Rosenberger, Kovendhan Vijayan, Wolfgang Freude, Tobias J. Kippenberg, Christian Koos

Abstract: Optical solitons are waveforms that preserve their shape while propagating, relying on a balance of dispersion and nonlinearity. Soliton-based data transmission schemes were investigated in the 1980s, promising to overcome the limitations imposed by dispersion of optical fibers. These approaches, however, were eventually abandoned in favor of wavelength-division multiplexing (WDM) schemes that are… ▽ More Optical solitons are waveforms that preserve their shape while propagating, relying on a balance of dispersion and nonlinearity. Soliton-based data transmission schemes were investigated in the 1980s, promising to overcome the limitations imposed by dispersion of optical fibers. These approaches, however, were eventually abandoned in favor of wavelength-division multiplexing (WDM) schemes that are easier to implement and offer improved scalability to higher data rates. Here, we show that solitons may experience a comeback in optical communications, this time not as a competitor, but as a key element of massively parallel WDM. Instead of encoding data on the soliton itself, we exploit continuously circulating dissipative Kerr solitons (DKS) in a microresonator. DKS are generated in an integrated silicon nitride microresonator by four-photon interactions mediated by Kerr nonlinearity, leading to low-noise, spectrally smooth and broadband optical frequency combs. In our experiments, we use two interleaved soliton Kerr combs to transmit a data stream of more than 50Tbit/s on a total of 179 individual optical carriers that span the entire telecommunication C and L bands. Equally important, we demonstrate coherent detection of a WDM data stream by using a pair of microresonator Kerr soliton combs - one as a multi-wavelength light source at the transmitter, and another one as a corresponding local oscillator (LO) at the receiver. This approach exploits the scalability advantages of microresonator soliton comb sources for massively parallel optical communications both at the transmitter and receiver side. Taken together, the results prove the significant potential of these sources to replace arrays of continuous-wave lasers in high-speed communications. △ Less

Submitted 17 April, 2017; v1 submitted 5 October, 2016; originally announced October 2016.

Comments: 10 pages, 3 figures

Journal ref: Nature, Vol. 546, pp. 274-279 (2017)

DC-electric-field-induced and low-frequency electromodulation second-harmonic generation spectroscopy of Si(001)-SiO$_2$ interfaces

Authors: O. A. Aktsipetrov, A. A. Fedyanin, A. V. Melnikov, E. D. Mishina, A. N. Rubtsov, M. H. Anderson, P. T. Wilson, M. ter Beek, X. F. Hu, J. I. Dadap, M. C. Downer

Abstract: The mechanism of DC-Electric-Field-Induced Second-Harmonic (EFISH) generation at weakly nonlinear buried Si(001)-SiO$_2$ interfaces is studied experimentally in planar Si(001)-SiO$_2$-Cr MOS structures by optical second-harmonic generation (SHG) spectroscopy with a tunable Ti:sapphire femtosecond laser. The spectral dependence of the EFISH contribution near the direct two-photon $E_1$ transition… ▽ More The mechanism of DC-Electric-Field-Induced Second-Harmonic (EFISH) generation at weakly nonlinear buried Si(001)-SiO$_2$ interfaces is studied experimentally in planar Si(001)-SiO$_2$-Cr MOS structures by optical second-harmonic generation (SHG) spectroscopy with a tunable Ti:sapphire femtosecond laser. The spectral dependence of the EFISH contribution near the direct two-photon $E_1$ transition of silicon is extracted. A systematic phenomenological model of the EFISH phenomenon, including a detailed description of the space charge region (SCR) at the semiconductor-dielectric interface in accumulation, depletion, and inversion regimes, has been developed. The influence of surface quantization effects, interface states, charge traps in the oxide layer, do** concentration and oxide thickness on nonlocal screening of the DC-electric field and on breaking of inversion symmetry in the SCR is considered. The model describes EFISH generation in the SCR using a Green function formalism which takes into account all retardation and absorption effects of the fundamental and second harmonic (SH) waves, optical interference between field-dependent and field-independent contributions to the SH field and multiple reflection interference in the SiO$_2$ layer. Good agreement between the phenomenological model and our recent and new EFISH spectroscopic results is demonstrated. Finally, low-frequency electromodulated EFISH is demonstrated as a useful differential spectroscopic technique for studies of the Si-SiO$_2$ interface in silicon-based MOS structures. △ Less

Submitted 3 June, 1998; v1 submitted 1 June, 1998; originally announced June 1998.

Comments: 31 pages, 14 figures, 1 table, figures are also available at http://kali.ilc.msu.su/articles/50/efish.htm