-
Design and Validation of a Cold Load for Characterization of CMB-S4 Detectors
Authors:
Cesiley L. King,
Ian Gullet,
Adam J. Anderson,
Bradford A. Benson,
Rick Bihary,
Haichen Fan,
Johanna M. Nagy,
Hogan Nguyen,
John E. Ruhl,
Sara M. Simon
Abstract:
We present the design and validation of a variable temperature cryogenic blackbody source, hereinafter called a cold load, that will be used to characterize detectors to be deployed by CMB-S4, the next-generation ground-based cosmic microwave background (CMB) experiment. Although cold loads have been used for detector characterization by previous CMB experiments, this cold load has three novel des…
▽ More
We present the design and validation of a variable temperature cryogenic blackbody source, hereinafter called a cold load, that will be used to characterize detectors to be deployed by CMB-S4, the next-generation ground-based cosmic microwave background (CMB) experiment. Although cold loads have been used for detector characterization by previous CMB experiments, this cold load has three novel design features: (1) the ability to operate from the 1 K stage of a dilution refrigerator (DR), (2) a 3He gas-gap heat switch to reduce cooling time, and (3) the ability to couple small external optical signals to measure detector optical time constants under low optical loading. The efficacy of this design was validated using a 150 GHz detector array previously deployed by the Spider experiment. Thermal tests showed that the cold load can be heated to temperatures required for characterizing CMB-S4's detectors without significantly impacting the temperatures of other cryogenic stages when mounted to the DR's 1 K stage. Additionally, optical tests demonstrated that external signals can be coupled to a detector array through the cold load without imparting a significant optical load on the detectors, which will enable measurements of the CMB-S4 detectors' optical time constants.
△ Less
Submitted 25 June, 2024;
originally announced June 2024.
-
A first demonstration of active feedback control and multi-frequency imaging techniques for kinetic inductance detectors
Authors:
Maclean Rouble,
Graeme Smecher,
Michel Adamič,
Adam Anderson,
Peter S. Barry,
Karia Dibert,
Matt Dobbs,
Kyra Fichman,
Joshua Montgomery
Abstract:
RF-ICE is a signal processing platform for the readout of large arrays of superconducting resonators. Designed for flexibility, the system's low digital latency and ability to independently and dynamically set the frequency and amplitude of probe tones in real time has enabled previously-inaccessible views of resonator behaviour, and opened the door to novel resonator control schemes. We introduce…
▽ More
RF-ICE is a signal processing platform for the readout of large arrays of superconducting resonators. Designed for flexibility, the system's low digital latency and ability to independently and dynamically set the frequency and amplitude of probe tones in real time has enabled previously-inaccessible views of resonator behaviour, and opened the door to novel resonator control schemes. We introduce a multi-frequency imaging technique, developed with RF-ICE, which allows simultaneous observation of the entire resonance bandwidth. We demonstrate the use of this technique in the examination of the response of superconducting resonators to variations in applied readout current and thermal loading. We observe that, used in conjunction with a conventional frequency sweep at sufficiently large amplitude to induce resonance bifurcation, the multi-frequency imaging technique reveals a resonator response which is not captured by the frequency sweep measurement alone. We demonstrate that equivalent resonant frequency shifts can be achieved using either thermal, optical, or readout loading, and use this equivalence to counteract a change in thermal loading by digitally modulating the readout current through a resonator. We develop and implement a proof-of-concept closed-loop negative electro-quasiparticle feedback algorithm which first sets and then maintains the resonant frequency of a lumped element kinetic inductance detector while the loading on it is varied. Although this simple implementation is not yet suitable to deploy at scale, it demonstrates the utility of this feedback technique to improve linearity while addressing amplifier distortion, resonator response non-uniformity, and crosstalk. It can be applied to kinetic inductors in non-bolometric operation, and sets the stage for future developments.
△ Less
Submitted 24 June, 2024;
originally announced June 2024.
-
A universal reduced basis for the calibration of covariant energy density functionals
Authors:
Amy L. Anderson,
J. Piekarewicz
Abstract:
The reduced basis method is used to construct a "universal" basis of Dirac orbitals that may be applicable throughout the nuclear chart to calibrate covariant energy density functionals. Relative to our earlier work using the non-relativistic Schrödinger equation, the Dirac equation adds an extra layer of complexity due to the existence of negative energy states. However, once this problem is miti…
▽ More
The reduced basis method is used to construct a "universal" basis of Dirac orbitals that may be applicable throughout the nuclear chart to calibrate covariant energy density functionals. Relative to our earlier work using the non-relativistic Schrödinger equation, the Dirac equation adds an extra layer of complexity due to the existence of negative energy states. However, once this problem is mitigated, the resulting reduced basis is able to accurately and efficiently reproduce the high-fidelity model at a fraction of the computational cost. We are confident that the resulting reduced basis will serve as a foundational element in develo** rapid and accurate emulators. In turn, these emulators will play a critical role in the Bayesian optimization of covariant energy density functionals.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
Soft Two-degree-of-freedom Dielectric Elastomer Position Sensor Exhibiting Linear Behavior
Authors:
Alexandre Girard,
Jean-Philippe Lucking Bigué,
Benjamin M. O'Brien,
Todd A. Gisby,
Iain A. Anderson,
Jean-Sébastien Plante
Abstract:
Soft robots could bring robotic systems to new horizons, by enabling safe human-machine interaction. For precise control, these soft structures require high level position feedback that is not easily achieved through conventional one-degree-of-freedom (DOF) sensing apparatus. In this paper, a soft two-DOF dielectric elastomer (DE) sensor is specifically designed to provide accurate position feedba…
▽ More
Soft robots could bring robotic systems to new horizons, by enabling safe human-machine interaction. For precise control, these soft structures require high level position feedback that is not easily achieved through conventional one-degree-of-freedom (DOF) sensing apparatus. In this paper, a soft two-DOF dielectric elastomer (DE) sensor is specifically designed to provide accurate position feedback for a soft polymer robotic manipulator. The technology is exemplified on a soft robot intended for MRI-guided prostate interventions. DEs are chosen for their major advantages of softness, high strains, low cost and embedded multiple-DOF sensing capability, providing excellent system integration. A geometrical model of the proposed DE sensor is developed and compared to experimental results in order to understand sensor mechanics. Using a differential measurement approach, a handmade prototype provided linear sensory behavior and 0.2 mm accuracy on two-DOF. This correlates to a 0.7\% error over the sensor's 30 mm x 30 mm planar range, demonstrating the outstanding potential of DE technology for accurate multi-DOF position sensing.
△ Less
Submitted 27 May, 2024;
originally announced May 2024.
-
Designing Skill-Compatible AI: Methodologies and Frameworks in Chess
Authors:
Karim Hamade,
Reid McIlroy-Young,
Siddhartha Sen,
Jon Kleinberg,
Ashton Anderson
Abstract:
Powerful artificial intelligence systems are often used in settings where they must interact with agents that are computationally much weaker, for example when they work alongside humans or operate in complex environments where some tasks are handled by algorithms, heuristics, or other entities of varying computational power. For AI agents to successfully interact in these settings, however, achie…
▽ More
Powerful artificial intelligence systems are often used in settings where they must interact with agents that are computationally much weaker, for example when they work alongside humans or operate in complex environments where some tasks are handled by algorithms, heuristics, or other entities of varying computational power. For AI agents to successfully interact in these settings, however, achieving superhuman performance alone is not sufficient; they also need to account for suboptimal actions or idiosyncratic style from their less-skilled counterparts. We propose a formal evaluation framework for assessing the compatibility of near-optimal AI with interaction partners who may have much lower levels of skill; we use popular collaborative chess variants as model systems to study and develop AI agents that can successfully interact with lower-skill entities. Traditional chess engines designed to output near-optimal moves prove to be inadequate partners when paired with engines of various lower skill levels in this domain, as they are not designed to consider the presence of other agents. We contribute three methodologies to explicitly create skill-compatible AI agents in complex decision-making settings, and two chess game frameworks designed to foster collaboration between powerful AI agents and less-skilled partners. On these frameworks, our agents outperform state-of-the-art chess AI (based on AlphaZero) despite being weaker in conventional chess, demonstrating that skill-compatibility is a tangible trait that is qualitatively and measurably distinct from raw performance. Our evaluations further explore and clarify the mechanisms by which our agents achieve skill-compatibility.
△ Less
Submitted 8 May, 2024;
originally announced May 2024.
-
Cryogenic optical beam steering for superconducting device calibration
Authors:
K. Stifter,
H. Magoon,
A. J. Anderson,
D. J. Temples,
N. A. Kurinsky,
C. Stoughton,
I. Hernandez,
A. Nuñez,
K. Anyang,
R. Linehan,
M. R. Young,
P. Barry,
D. Baxter,
D. Bowring,
G. Cancelo,
A. Chou,
K. R. Dibert,
E. Figueroa-Feliciano,
L. Hsu,
R. Khatiwada,
S. D. Mork,
L. Stefanazzi,
N. Tabassum,
S. Uemura,
B. A. Young
Abstract:
We have developed a calibration system based on a micro-electromechanical systems (MEMS) mirror that is capable of delivering an optical beam over a wavelength range of 180 -- 2000 nm (0.62 -- 6.89 eV) in a sub-Kelvin environment. This portable, integrated system can steer the beam over a $\sim$3 cm $\times$ 3 cm area on the surface of any sensor with a precision of $\sim$100 $μ$m, enabling charac…
▽ More
We have developed a calibration system based on a micro-electromechanical systems (MEMS) mirror that is capable of delivering an optical beam over a wavelength range of 180 -- 2000 nm (0.62 -- 6.89 eV) in a sub-Kelvin environment. This portable, integrated system can steer the beam over a $\sim$3 cm $\times$ 3 cm area on the surface of any sensor with a precision of $\sim$100 $μ$m, enabling characterization of device response as a function of position. This fills a critical need in the landscape of calibration tools for sub-Kelvin devices, including those used for dark matter detection and quantum computing. These communities have a shared goal of understanding the impact of ionizing radiation on device performance, which can be pursued with our system. This paper describes the design of the first-generation calibration system and the results from successfully testing its performance at room temperature and 20 mK.
△ Less
Submitted 3 May, 2024;
originally announced May 2024.
-
Improving User Mental Models of XAI Systems with Inclusive Design Approaches
Authors:
Md Montaser Hamid,
Fatima Moussaoui,
Jimena Noa Guevara,
Andrew Anderson,
Margaret Burnett
Abstract:
Explainable Artificial Intelligence (XAI) systems aim to improve users' understanding of AI but rarely consider the inclusivity aspects of XAI. Without inclusive approaches, improving explanations might not work well for everyone. This study investigates leveraging users' diverse problem-solving styles as an inclusive strategy to fix an XAI prototype, with the ultimate goal of improving users' men…
▽ More
Explainable Artificial Intelligence (XAI) systems aim to improve users' understanding of AI but rarely consider the inclusivity aspects of XAI. Without inclusive approaches, improving explanations might not work well for everyone. This study investigates leveraging users' diverse problem-solving styles as an inclusive strategy to fix an XAI prototype, with the ultimate goal of improving users' mental models of AI. We ran a between-subject study with 69 participants. Our results show that the inclusivity fixes increased participants' engagement with explanations and produced significantly improved mental models. Analyzing differences in mental model scores further highlighted specific inclusivity fixes that contributed to the significant improvement in the mental model.
△ Less
Submitted 19 April, 2024;
originally announced April 2024.
-
Mass calibration of DES Year-3 clusters via SPT-3G CMB cluster lensing
Authors:
B. Ansarinejad,
S. Raghunathan,
T. M. C. Abbott,
P. A. R. Ade,
M. Aguena,
O. Alves,
A. J. Anderson,
F. Andrade-Oliveira,
M. Archipley,
L. Balkenhol,
K. Benabed,
A. N. Bender,
B. A. Benson,
E. Bertin,
F. Bianchini,
L. E. Bleem,
S. Bocquet,
F. R. Bouchet,
D. Brooks,
L. Bryant,
D. L. Burke,
E. Camphuis,
J. E. Carlstrom,
A. Carnero Rosell,
J. Carretero
, et al. (120 additional authors not shown)
Abstract:
We measure the stacked lensing signal in the direction of galaxy clusters in the Dark Energy Survey Year 3 (DES Y3) redMaPPer sample, using cosmic microwave background (CMB) temperature data from SPT-3G, the third-generation CMB camera on the South Pole Telescope (SPT). We estimate the lensing signal using temperature maps constructed from the initial 2 years of data from the SPT-3G 'Main' survey,…
▽ More
We measure the stacked lensing signal in the direction of galaxy clusters in the Dark Energy Survey Year 3 (DES Y3) redMaPPer sample, using cosmic microwave background (CMB) temperature data from SPT-3G, the third-generation CMB camera on the South Pole Telescope (SPT). We estimate the lensing signal using temperature maps constructed from the initial 2 years of data from the SPT-3G 'Main' survey, covering 1500 deg$^2$ of the Southern sky. We then use this signal as a proxy for the mean cluster mass of the DES sample. In this work, we employ three versions of the redMaPPer catalogue: a Flux-Limited sample containing 8865 clusters, a Volume-Limited sample with 5391 clusters, and a Volume&Redshift-Limited sample with 4450 clusters. For the three samples, we find the mean cluster masses to be ${M}_{200{\rm{m}}}=1.66\pm0.13$ [stat.]$\pm0.03$ [sys.], $1.97\pm0.18$ [stat.]$\pm0.05$ [sys.], and $2.11\pm0.20$ [stat.]$\pm0.05$ [sys.]$\times{10}^{14}\ {\rm{M}}_{\odot }$, respectively. This is a factor of $\sim2$ improvement relative to the precision of measurements with previous generations of SPT surveys and the most constraining cluster mass measurements using CMB cluster lensing to date. Overall, we find no significant tensions between our results and masses given by redMaPPer mass-richness scaling relations of previous works, which were calibrated using CMB cluster lensing, optical weak lensing, and velocity dispersion measurements from various combinations of DES, SDSS and Planck data. We then divide our sample into 3 redshift and 3 richness bins, finding no significant tensions with optical weak-lensing calibrated masses in these bins. We forecast a $5.7\%$ constraint on the mean cluster mass of the DES Y3 sample with the complete SPT-3G surveys when using both temperature and polarization data and including an additional $\sim1400$ deg$^2$ of observations from the 'Extended' SPT-3G survey.
△ Less
Submitted 12 June, 2024; v1 submitted 2 April, 2024;
originally announced April 2024.
-
Testing the $\mathbfΛ$CDM Cosmological Model with Forthcoming Measurements of the Cosmic Microwave Background with SPT-3G
Authors:
K. Prabhu,
S. Raghunathan,
M. Millea,
G. Lynch,
P. A. R. Ade,
E. Anderes,
A. J. Anderson,
B. Ansarinejad,
M. Archipley,
L. Balkenhol,
K. Benabed,
A. N. Bender,
B. A. Benson,
F. Bianchini,
L. E. Bleem,
F. R. Bouchet,
L. Bryant,
E. Camphuis,
J. E. Carlstrom,
T. W. Cecil,
C. L. Chang,
P. Chaubal,
P. M. Chichura,
T. -L. Chou,
A. Coerver
, et al. (76 additional authors not shown)
Abstract:
We forecast constraints on cosmological parameters enabled by three surveys conducted with SPT-3G, the third-generation camera on the South Pole Telescope. The surveys cover separate regions of 1500, 2650, and 6000 ${\rm deg}^{2}$ to different depths, in total observing 25% of the sky. These regions will be measured to white noise levels of roughly 2.5, 9, and 12 $μ{\rm K-arcmin}$, respectively, i…
▽ More
We forecast constraints on cosmological parameters enabled by three surveys conducted with SPT-3G, the third-generation camera on the South Pole Telescope. The surveys cover separate regions of 1500, 2650, and 6000 ${\rm deg}^{2}$ to different depths, in total observing 25% of the sky. These regions will be measured to white noise levels of roughly 2.5, 9, and 12 $μ{\rm K-arcmin}$, respectively, in CMB temperature units at 150 GHz by the end of 2024. The survey also includes measurements at 95 and 220 GHz, which have noise levels a factor of ~1.2 and 3.5 times higher than 150 GHz, respectively, with each band having a polarization noise level ~$\sqrt{\text{2}}$ times higher than the temperature noise. We use a novel approach to obtain the covariance matrices for jointly and optimally estimated gravitational lensing potential bandpowers and unlensed CMB temperature and polarization bandpowers. We demonstrate the ability to test the $Λ{\rm CDM}$ model via the consistency of cosmological parameters constrained independently from SPT-3G and Planck data, and consider the improvement in constraints on $Λ{\rm CDM}$ extension parameters from a joint analysis of SPT-3G and Planck data. The $Λ{\rm CDM}$ cosmological parameters are typically constrained with uncertainties up to ~2 times smaller with SPT-3G data, compared to Planck, with the two data sets measuring significantly different angular scales and polarization levels, providing additional tests of the standard cosmological model.
△ Less
Submitted 26 March, 2024;
originally announced March 2024.
-
First Constraints on the Epoch of Reionization Using the non-Gaussianity of the Kinematic Sunyaev-Zel{'}dovich Effect from the South Pole Telescope and {\it Herschel}-SPIRE Observations
Authors:
S. Raghunathan,
P. A. R. Ade,
A. J. Anderson,
B. Ansarinejad,
M. Archipley,
J. E. Austermann,
L. Balkenhol,
J. A. Beall,
K. Benabed,
A. N. Bender,
B. A. Benson,
F. Bianchini,
L. E. Bleem,
J. Bock,
F. R. Bouchet,
L. Bryant,
E. Camphuis,
J. E. Carlstrom,
T. W. Cecil,
C. L. Chang,
P. Chaubal,
H. C. Chiang,
P. M. Chichura,
T. -L. Chou,
R. Citron
, et al. (97 additional authors not shown)
Abstract:
We report results from an analysis aimed at detecting the trispectrum of the kinematic Sunyaev-Zel{'}dovich (kSZ) effect by combining data from the South Pole Telescope (SPT) and {\it Herschel}-SPIRE experiments over a 100 ${\rm deg}^{2}$ field. The SPT observations combine data from the previous and current surveys, namely SPTpol and SPT-3G, to achieve depths of 4.5, 3, and 16 $μ{\rm K-arcmin}$ i…
▽ More
We report results from an analysis aimed at detecting the trispectrum of the kinematic Sunyaev-Zel{'}dovich (kSZ) effect by combining data from the South Pole Telescope (SPT) and {\it Herschel}-SPIRE experiments over a 100 ${\rm deg}^{2}$ field. The SPT observations combine data from the previous and current surveys, namely SPTpol and SPT-3G, to achieve depths of 4.5, 3, and 16 $μ{\rm K-arcmin}$ in bands centered at 95, 150, and 220 GHz. For SPIRE, we include data from the 600 and 857 GHz bands. We reconstruct the velocity-induced large-scale correlation of the small-scale kSZ signal with a quadratic estimator that uses two cosmic microwave background (CMB) temperature maps, constructed by optimally combining data from all the frequency bands. We reject the null hypothesis of a zero trispectrum at $10.3σ$ level. However, the measured trispectrum contains contributions from both the kSZ and other undesired components, such as CMB lensing and astrophysical foregrounds, with kSZ being sub-dominant. We use the \textsc{Agora} simulations to estimate the expected signal from CMB lensing and astrophysical foregrounds. After accounting for the contributions from CMB lensing and foreground signals, we do not detect an excess kSZ-only trispectrum and use this non-detection to set constraints on reionization. By applying a prior based on observations of the Gunn-Peterson trough, we obtain an upper limit on the duration of reionization of $Δz_{\rm re, 50} < 4.5$ (95\% C.L). We find these constraints are fairly robust to foregrounds assumptions. This trispectrum measurement is independent of, but consistent with, {\it Planck}'s optical depth measurement. This result is the first constraint on the epoch of reionization using the non-Gaussian nature of the kSZ signal.
△ Less
Submitted 4 March, 2024;
originally announced March 2024.
-
Deconstructing the Veneer of Simplicity: Co-Designing Introductory Generative AI Workshops with Local Entrepreneurs
Authors:
Yasmine Kotturi,
Angel Anderson,
Glenn Ford,
Michael Skirpan,
Jeffrey P. Bigham
Abstract:
Generative AI platforms and features are permeating many aspects of work. Entrepreneurs from lean economies in particular are well positioned to outsource tasks to generative AI given limited resources. In this paper, we work to address a growing disparity in use of these technologies by building on a four-year partnership with a local entrepreneurial hub dedicated to equity in tech and entreprene…
▽ More
Generative AI platforms and features are permeating many aspects of work. Entrepreneurs from lean economies in particular are well positioned to outsource tasks to generative AI given limited resources. In this paper, we work to address a growing disparity in use of these technologies by building on a four-year partnership with a local entrepreneurial hub dedicated to equity in tech and entrepreneurship. Together, we co-designed an interactive workshops series aimed to onboard local entrepreneurs to generative AI platforms. Alongside four community-driven and iterative workshops with entrepreneurs across five months, we conducted interviews with 15 local entrepreneurs and community providers. We detail the importance of communal and supportive exposure to generative AI tools for local entrepreneurs, scaffolding actionable use (and supporting non-use), demystifying generative AI technologies by emphasizing entrepreneurial power, while simultaneously deconstructing the veneer of simplicity to address the many operational skills needed for successful application.
△ Less
Submitted 26 February, 2024;
originally announced February 2024.
-
Some integral operators acting on $H^{\infty}$
Authors:
Austin Anderson,
Mirjana Jovovic,
Wayne Smith
Abstract:
Let $f$ and $g$ be analytic on the unit disc $\mathbb{D}$. The integral operator $T_g$ is defined by $ T_g f(z) = \int_0^z f(t)g'(t)\,dt$, $z \in \mathbb{D}$. The problem considered is characterizing those symbols $g$ for which $T_g$ acting on $H^\infty$, the space of bounded analytic functions on $\mathbb{D}$, is bounded or compact. When the symbol is univalent, these become questions in univalen…
▽ More
Let $f$ and $g$ be analytic on the unit disc $\mathbb{D}$. The integral operator $T_g$ is defined by $ T_g f(z) = \int_0^z f(t)g'(t)\,dt$, $z \in \mathbb{D}$. The problem considered is characterizing those symbols $g$ for which $T_g$ acting on $H^\infty$, the space of bounded analytic functions on $\mathbb{D}$, is bounded or compact. When the symbol is univalent, these become questions in univalent function theory. The corresponding problems for the companion operator, $ S_g f(z)= \int_0^z f'(t)g(t)\, dt$, acting on $H^\infty$ are also studied.
△ Less
Submitted 9 February, 2024;
originally announced February 2024.
-
Flaring Stars in a Non-targeted mm-wave Survey with SPT-3G
Authors:
C. Tandoi,
S. Guns,
A. Foster,
P. A. R. Ade,
A. J. Anderson,
B. Ansarinejad,
M. Archipley,
L. Balkenhol,
K. Benabed,
A. N. Bender,
B. A. Benson,
F. Bianchini,
L. E. Bleem,
F. R. Bouchet,
L. Bryant,
E. Camphuis,
J. E. Carlstrom,
T. W. Cecil,
C. L. Chang,
P. Chaubal,
P. M. Chichura,
T. -L. Chou,
A. Coerver,
T. M. Crawford,
A. Cukierman
, et al. (74 additional authors not shown)
Abstract:
We present a flare star catalog from four years of non-targeted millimeter-wave survey data from the South Pole Telescope (SPT). The data were taken with the SPT-3G camera and cover a 1500-square-degree region of the sky from $20^{h}40^{m}0^{s}$ to $3^{h}20^{m}0^{s}$ in right ascension and $-42^{\circ}$ to $-70^{\circ}$ in declination. This region was observed on a nearly daily cadence from 2019-2…
▽ More
We present a flare star catalog from four years of non-targeted millimeter-wave survey data from the South Pole Telescope (SPT). The data were taken with the SPT-3G camera and cover a 1500-square-degree region of the sky from $20^{h}40^{m}0^{s}$ to $3^{h}20^{m}0^{s}$ in right ascension and $-42^{\circ}$ to $-70^{\circ}$ in declination. This region was observed on a nearly daily cadence from 2019-2022 and chosen to avoid the plane of the galaxy. A short-duration transient search of this survey yields 111 flaring events from 66 stars, increasing the number of both flaring events and detected flare stars by an order of magnitude from the previous SPT-3G data release. We provide cross-matching to Gaia DR3, as well as matches to X-ray point sources found in the second ROSAT all-sky survey. We have detected flaring stars across the main sequence, from early-type A stars to M dwarfs, as well as a large population of evolved stars. These stars are mostly nearby, spanning 10 to 1000 parsecs in distance. Most of the flare spectral indices are constant or gently rising as a function of frequency at 95/150/220 GHz. The timescale of these events can range from minutes to hours, and the peak $νL_ν$ luminosities range from $10^{27}$ to $10^{31}$ erg s$^{-1}$ in the SPT-3G frequency bands.
△ Less
Submitted 24 January, 2024;
originally announced January 2024.
-
Development and validation of a cryogenic far-infrared diffraction grating spectrometer used to post-disperse the output from a Fourier transform spectrometer
Authors:
Alicia M. Anderson,
David A. Naylor,
Brad G. Gom,
Matthew A. Buchan,
Adam J. Christiansen,
Ian T. Veenendaal
Abstract:
Recent advances in far-infrared detector technology have led to increases in raw sensitivity of more than an order of magnitude over previous state-of-the-art detectors. With such sensitivity, photon noise becomes the dominant noise component, even when using cryogenically cooled optics, unless a method of restricting the spectral bandpass is employed. The leading instrument concept features refle…
▽ More
Recent advances in far-infrared detector technology have led to increases in raw sensitivity of more than an order of magnitude over previous state-of-the-art detectors. With such sensitivity, photon noise becomes the dominant noise component, even when using cryogenically cooled optics, unless a method of restricting the spectral bandpass is employed. The leading instrument concept features reflecting diffraction gratings which post-disperse the light that has been modulated by a polarizing Fourier transform spectrometer (FTS) onto a detector array, thereby reducing the photon noise on each detector. This paper discusses the development of a cryogenic (4 K) diffraction grating spectrometer which operates over the wavelength range from 285 - 500 $μ$m and was used to post-disperse the output from a room-temperature polarizing FTS. Measurements of the grating spectral response and diffraction efficiency are presented as a function of both wavelength and polarization to characterize the instrumental performance.
△ Less
Submitted 30 January, 2024; v1 submitted 9 January, 2024;
originally announced January 2024.
-
SPT Clusters with DES and HST Weak Lensing. II. Cosmological Constraints from the Abundance of Massive Halos
Authors:
S. Bocquet,
S. Grandis,
L. E. Bleem,
M. Klein,
J. J. Mohr,
T. Schrabback,
T. M. C. Abbott,
P. A. R. Ade,
M. Aguena,
A. Alarcon,
S. Allam,
S. W. Allen,
O. Alves,
A. Amon,
A. J. Anderson,
J. Annis,
B. Ansarinejad,
J. E. Austermann,
S. Avila,
D. Bacon,
M. Bayliss,
J. A. Beall,
K. Bechtol,
M. R. Becker,
A. N. Bender
, et al. (171 additional authors not shown)
Abstract:
We present cosmological constraints from the abundance of galaxy clusters selected via the thermal Sunyaev-Zel'dovich (SZ) effect in South Pole Telescope (SPT) data with a simultaneous mass calibration using weak gravitational lensing data from the Dark Energy Survey (DES) and the Hubble Space Telescope (HST). The cluster sample is constructed from the combined SPT-SZ, SPTpol ECS, and SPTpol 500d…
▽ More
We present cosmological constraints from the abundance of galaxy clusters selected via the thermal Sunyaev-Zel'dovich (SZ) effect in South Pole Telescope (SPT) data with a simultaneous mass calibration using weak gravitational lensing data from the Dark Energy Survey (DES) and the Hubble Space Telescope (HST). The cluster sample is constructed from the combined SPT-SZ, SPTpol ECS, and SPTpol 500d surveys, and comprises 1,005 confirmed clusters in the redshift range $0.25-1.78$ over a total sky area of 5,200 deg$^2$. We use DES Year 3 weak-lensing data for 688 clusters with redshifts $z<0.95$ and HST weak-lensing data for 39 clusters with $0.6<z<1.7$. The weak-lensing measurements enable robust mass measurements of sample clusters and allow us to empirically constrain the SZ observable--mass relation. For a flat $Λ$CDM cosmology, and marginalizing over the sum of massive neutrinos, we measure $Ω_\mathrm{m}=0.286\pm0.032$, $σ_8=0.817\pm0.026$, and the parameter combination $σ_8\,(Ω_\mathrm{m}/0.3)^{0.25}=0.805\pm0.016$. Our measurement of $S_8\equivσ_8\,\sqrt{Ω_\mathrm{m}/0.3}=0.795\pm0.029$ and the constraint from Planck CMB anisotropies (2018 TT,TE,EE+lowE) differ by $1.1σ$. In combination with that Planck dataset, we place a 95% upper limit on the sum of neutrino masses $\sum m_ν<0.18$ eV. When additionally allowing the dark energy equation of state parameter $w$ to vary, we obtain $w=-1.45\pm0.31$ from our cluster-based analysis. In combination with Planck data, we measure $w=-1.34^{+0.22}_{-0.15}$, or a $2.2σ$ difference with a cosmological constant. We use the cluster abundance to measure $σ_8$ in five redshift bins between 0.25 and 1.8, and we find the results to be consistent with structure growth as predicted by the $Λ$CDM model fit to Planck primary CMB data.
△ Less
Submitted 21 June, 2024; v1 submitted 4 January, 2024;
originally announced January 2024.
-
Capturing Dynamics in Online Public Discourse: A Case Study of Universal Basic Income Discussions on Reddit
Authors:
Rachel Kim,
Veniamin Veselovsky,
Ashton Anderson
Abstract:
Societal change is often driven by shifts in public opinion. As citizens evolve in their norms, beliefs, and values, public policies change too. While traditional opinion polling and surveys can outline the broad strokes of whether public opinion on a particular topic is changing, they usually cannot capture the full multi-dimensional richness and diversity of opinion present in a large heterogene…
▽ More
Societal change is often driven by shifts in public opinion. As citizens evolve in their norms, beliefs, and values, public policies change too. While traditional opinion polling and surveys can outline the broad strokes of whether public opinion on a particular topic is changing, they usually cannot capture the full multi-dimensional richness and diversity of opinion present in a large heterogeneous population. However, an increasing fraction of public discourse about public policy issues is now occurring on online platforms, which presents an opportunity to measure public opinion change at a qualitatively different scale of resolution and context.
In this paper, we present a conceptual model of observed opinion change on online platforms and apply it to study public discourse on Universal Basic Income (UBI) on Reddit throughout its history. UBI is a periodic, no-strings-attached cash payment given to every citizen of a population. We study UBI as it is a clearly-defined policy proposal that has recently experienced a surge of interest through trends like automation and events like the COVID-19 pandemic. We find that overall stance towards UBI on Reddit significantly declined until mid-2019, when this historical trend suddenly reversed and Reddit became substantially more supportive. Using our model, we find the most significant drivers of this overall stance change were shifts within different user cohorts, within communities that represented similar affluence levels, and within communities that represented similar partisan leanings. Our method identifies nuanced social drivers of opinion change in the large-scale public discourse that now regularly occurs online, and could be applied to a broad set of other important issues and policies.
△ Less
Submitted 15 December, 2023;
originally announced December 2023.
-
ICL Markup: Structuring In-Context Learning using Soft-Token Tags
Authors:
Marc-Etienne Brunet,
Ashton Anderson,
Richard Zemel
Abstract:
Large pretrained language models (LLMs) can be rapidly adapted to a wide variety of tasks via a text-to-text approach, where the instruction and input are fed to the model in natural language. Combined with in-context learning (ICL), this paradigm is impressively flexible and powerful. However, it also burdens users with an overwhelming number of choices, many of them arbitrary. Inspired by markup…
▽ More
Large pretrained language models (LLMs) can be rapidly adapted to a wide variety of tasks via a text-to-text approach, where the instruction and input are fed to the model in natural language. Combined with in-context learning (ICL), this paradigm is impressively flexible and powerful. However, it also burdens users with an overwhelming number of choices, many of them arbitrary. Inspired by markup languages like HTML, we contribute a method of using soft-token tags to compose prompt templates. This approach reduces arbitrary decisions and streamlines the application of ICL. Our method is a form of meta-learning for ICL; it learns these tags in advance during a parameter-efficient fine-tuning ``warm-up'' process. The tags can subsequently be used in templates for ICL on new, unseen tasks without any additional fine-tuning. Our experiments with this approach yield promising initial results, improving LLM performance on important enterprise applications such as few-shot and open-world intent detection, as well as text classification in news and legal domains.
△ Less
Submitted 12 December, 2023;
originally announced December 2023.
-
Reducing the time-step errors in diffusion Monte Carlo
Authors:
Tyler A. Anderson,
Manolo C. Per,
C. J. Umrigar
Abstract:
We modify the reweighting factor of the projector used in diffusion Monte Carlo to reduce the time-step error of the total energy. Further, we present a reweighting scheme that has the desirable feature that it is exactly size-consistent, i.e, the energy of a system containing widely separated fragments is the same as the sum of the energies of the individual fragments. The practical utility of th…
▽ More
We modify the reweighting factor of the projector used in diffusion Monte Carlo to reduce the time-step error of the total energy. Further, we present a reweighting scheme that has the desirable feature that it is exactly size-consistent, i.e, the energy of a system containing widely separated fragments is the same as the sum of the energies of the individual fragments. The practical utility of the latter improvement is that it reduces the time-step error of the binding energies of some weakly interacting systems.
△ Less
Submitted 15 March, 2024; v1 submitted 3 December, 2023;
originally announced December 2023.
-
SPIN: Sparsifying and Integrating Internal Neurons in Large Language Models for Text Classification
Authors:
Difan Jiao,
Yilun Liu,
Zhenwei Tang,
Daniel Matter,
Jürgen Pfeffer,
Ashton Anderson
Abstract:
Among the many tasks that Large Language Models (LLMs) have revolutionized is text classification. Current text classification paradigms, however, rely solely on the output of the final layer in the LLM, with the rich information contained in internal neurons largely untapped. In this study, we present SPIN: a model-agnostic framework that sparsifies and integrates internal neurons of intermediate…
▽ More
Among the many tasks that Large Language Models (LLMs) have revolutionized is text classification. Current text classification paradigms, however, rely solely on the output of the final layer in the LLM, with the rich information contained in internal neurons largely untapped. In this study, we present SPIN: a model-agnostic framework that sparsifies and integrates internal neurons of intermediate layers of LLMs for text classification. Specifically, SPIN sparsifies internal neurons by linear probing-based salient neuron selection layer by layer, avoiding noise from unrelated neurons and ensuring efficiency. The cross-layer salient neurons are then integrated to serve as multi-layered features for the classification head. Extensive experimental results show our proposed SPIN significantly improves text classification accuracy, efficiency, and interpretability.
△ Less
Submitted 5 June, 2024; v1 submitted 27 November, 2023;
originally announced November 2023.
-
Galaxy Clusters Discovered via the Thermal Sunyaev-Zel'dovich Effect in the 500-square-degree SPTpol Survey
Authors:
L. E. Bleem,
M. Klein,
T. M. C. Abbott,
P. A. R. Ade,
M. Aguena,
O. Alves,
A. J. Anderson,
F. Andrade-Oliveira,
B. Ansarinejad,
M. Archipley,
M. L. N. Ashby,
J. E. Austermann,
D. Bacon,
J. A. Beall,
A. N. Bender,
B. A. Benson,
F. Bianchini,
S. Bocquet,
D. Brooks,
D. L. Burke,
M. Calzadilla,
J. E. Carlstrom,
A. Carnero Rosell,
J. Carretero,
C. L. Chang
, et al. (103 additional authors not shown)
Abstract:
We present a catalog of 689 galaxy cluster candidates detected at significance $ξ>4$ via their thermal Sunyaev-Zel'dovich (SZ) effect signature in 95 and 150 GHz data from the 500-square-degree SPTpol survey. We use optical and infrared data from the Dark Energy Camera and the Wide-field Infrared Survey Explorer (WISE) and \spitzer \ satellites, to confirm 544 of these candidates as clusters with…
▽ More
We present a catalog of 689 galaxy cluster candidates detected at significance $ξ>4$ via their thermal Sunyaev-Zel'dovich (SZ) effect signature in 95 and 150 GHz data from the 500-square-degree SPTpol survey. We use optical and infrared data from the Dark Energy Camera and the Wide-field Infrared Survey Explorer (WISE) and \spitzer \ satellites, to confirm 544 of these candidates as clusters with $\sim94\%$ purity. The sample has an approximately redshift-independent mass threshold at redshift $z>0.25$ and spans $1.5 \times 10^{14} < M_{500c} < 9.1 \times 10^{14}$ $M_\odot/h_{70}$ \ and $0.03<z\lesssim1.6$ in mass and redshift, respectively; 21\% of the confirmed clusters are at $z>1$. We use external radio data from the Sydney University Molonglo Sky Survey (SUMSS) to estimate contamination to the SZ signal from synchrotron sources. The contamination reduces the recovered $ξ$ by a median value of 0.032, or $\sim0.8\%$ of the $ξ=4$ threshold value, and $\sim7\%$ of candidates have a predicted contamination greater than $Δξ= 1$. With the exception of a small number of systems $(<1\%)$, an analysis of clusters detected in single-frequency 95 and 150 GHz data shows no significant contamination of the SZ signal by emission from dusty or synchrotron sources. This cluster sample will be a key component in upcoming astrophysical and cosmological analyses of clusters. The SPTpol millimeter-wave maps and associated data products used to produce this sample are available at https://pole.uchicago.edu/public/data/sptpol_500d_clusters/index.html, and the NASA LAMBDA website. An interactive sky server with the SPTpol maps and Dark Energy Survey data release 2 images is also available at NCSA https://skyviewer.ncsa.illinois.edu.
△ Less
Submitted 8 February, 2024; v1 submitted 13 November, 2023;
originally announced November 2023.
-
High-angular-momentum Rydberg states in a room-temperature vapor cell for DC electric-field sensing
Authors:
Alisher Duspayev,
Ryan Cardman,
David A. Anderson,
Georg Raithel
Abstract:
We prepare and analyze Rydberg states with orbital quantum numbers $\ell \le 6$ using three-optical-photon electromagnetically-induced transparency (EIT) and radio-frequency (RF) dressing, and employ the high-$\ell$ states in electric-field sensing. Rubidium-85 atoms in a room-temperature vapor cell are first promoted into the $25F_{5/2}$ state via Rydberg-EIT with three infrared laser beams. Two…
▽ More
We prepare and analyze Rydberg states with orbital quantum numbers $\ell \le 6$ using three-optical-photon electromagnetically-induced transparency (EIT) and radio-frequency (RF) dressing, and employ the high-$\ell$ states in electric-field sensing. Rubidium-85 atoms in a room-temperature vapor cell are first promoted into the $25F_{5/2}$ state via Rydberg-EIT with three infrared laser beams. Two RF dressing fields then (near-)resonantly couple $25 \ell$ Rydberg states with high $\ell$. The dependence of the RF-dressed Rydberg-state level structure on RF powers, RF and laser frequencies is characterized using EIT. Furthermore, we discuss the principles of DC-electric-field sensing using high-$\ell$ Rydberg states, and experimentally demonstrate the method using test electric fields of $\lesssim$~50~V/m induced via photo-illumination of the vapor-cell wall. We measure the highly nonlinear dependence of the DC-electric-field strength on the power of the photo-illumination laser. Numerical calculations, which reproduce our experimental observations well, elucidate the underlying physics. Our study is relevant to high-precision spectroscopy of high-$\ell$ Rydberg states, Rydberg-atom-based electric-field sensing, and plasma electric-field diagnostics.
△ Less
Submitted 16 October, 2023;
originally announced October 2023.
-
RF-ICE: large-scale gigahertz readout of frequency-multiplexed microwave kinetic inductance detectors
Authors:
M. Rouble,
G. Smecher,
A. Anderson,
P. S. Barry,
K. Dibert,
M. Dobbs,
K. S. Karkare,
J. Montgomery
Abstract:
We present RF-ICE, a novel readout platform for microwave kinetic inductance detectors (MKIDs), optimized for use on millimeter-wavelength telescopes. The RF-ICE system extends ICE, a versatile, mature signal processing platform currently in use on telescopes around the world, into a new operational domain with MKIDs biased with gigahertz carriers. The system couples the FPGA-based ICE motherboard…
▽ More
We present RF-ICE, a novel readout platform for microwave kinetic inductance detectors (MKIDs), optimized for use on millimeter-wavelength telescopes. The RF-ICE system extends ICE, a versatile, mature signal processing platform currently in use on telescopes around the world, into a new operational domain with MKIDs biased with gigahertz carriers. The system couples the FPGA-based ICE motherboard with a radio-frequency digitization daughterboard to enable direct digital synthesis from 0 to 6 GHz without the need for external mixing. The system operates two independent readout modules, each with 1024 frequency-multiplexed readout channels spaced across 500 MHz of carrier bandwidth. The system, which is under active development, is in operation with prototype detector wafers and will be deployed for the upcoming SPT-SLIM and SPT-3G+ experiments.
△ Less
Submitted 11 October, 2023;
originally announced October 2023.
-
Generically Stable Measures and Distal Regularity in Continuous Logic
Authors:
Aaron Anderson
Abstract:
We develop a theory of generically stable and smooth Keisler measures in NIP metric theories, generalizing the case of classical logic. Using smooth extensions, we verify that fundamental properties of (Borel)-definable measures and the Morley product hold in the NIP metric setting. With these results, we prove that as in discrete logic, generic stability can be defined equivalently through defina…
▽ More
We develop a theory of generically stable and smooth Keisler measures in NIP metric theories, generalizing the case of classical logic. Using smooth extensions, we verify that fundamental properties of (Borel)-definable measures and the Morley product hold in the NIP metric setting. With these results, we prove that as in discrete logic, generic stability can be defined equivalently through definability properties, statistical properties, or behavior under the Morley product. We also examine weakly orthogonal Keisler measures, characterizing weak orthogonality in terms of various analytic regularity properties.
We then examine Keisler measures in distal metric theories, proving that as in discrete logic, distality is characterized by all generically stable measures being smooth, or by all pairs of generically stable measures being weakly orthogonal. We then use this, together with our results on weak orthogonality and a cutting lemma, to find analytic versions of distal regularity and the strong Erdős-Hajnal property.
△ Less
Submitted 10 October, 2023;
originally announced October 2023.
-
Fuzzy VC Combinatorics and Distality in Continuous Logic
Authors:
Aaron Anderson
Abstract:
Model theory, machine learning, and combinatorics each have generalizations of VC-dimension for fuzzy and real-valued versions of set systems. These different dimensions define a unique notion of a VC-class for both fuzzy sets and real-valued functions. We study these VC-classes, obtaining generalizations of certain combinatorial results from the discrete case. These include appropriate generaliza…
▽ More
Model theory, machine learning, and combinatorics each have generalizations of VC-dimension for fuzzy and real-valued versions of set systems. These different dimensions define a unique notion of a VC-class for both fuzzy sets and real-valued functions. We study these VC-classes, obtaining generalizations of certain combinatorial results from the discrete case. These include appropriate generalizations of $\varepsilon$-nets, the fractional Helly property and the $(p,q)$-theorem.
We then apply these results to continuous logic. We prove that NIP for metric structures is equivalent to an appropriate generalization of honest definitions, which we use to study externally definable predicates and the Shelah expansion. We then examine distal metric structures, providing several equivalent characterizations, in terms of indiscernible sequences, distal types, strong honest definitions, and distal cell decompositions.
△ Less
Submitted 6 October, 2023;
originally announced October 2023.
-
The Tight Upper Bound for the Size of Single Deletion Error Correcting Codes in Dimension 11
Authors:
Kazuhisa Nakasho,
Manabu Hagiwara,
Austin Anderson,
J. B. Nation
Abstract:
A single deletion error correcting code (SDECC) is a set of fixed-length sequences consisting of two types of symbols, 0 and 1, such that the original sequence can be recovered for at most one deletion error. The upper bound for the size of SDECC is expected to be equal to the size of Varshamov-Tenengolts (VT) code, and this conjecture had been shown to be true when the code length is ten or less.…
▽ More
A single deletion error correcting code (SDECC) is a set of fixed-length sequences consisting of two types of symbols, 0 and 1, such that the original sequence can be recovered for at most one deletion error. The upper bound for the size of SDECC is expected to be equal to the size of Varshamov-Tenengolts (VT) code, and this conjecture had been shown to be true when the code length is ten or less. In this paper, we discuss a method for calculating this upper bound by providing an integer linear programming solver with several linear constraints. As a new result, we obtained that the tight upper bound for the size of a single deletion error correcting code in dimension 11 is 172.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
A Cryogenic Tune and Match Circuit for Magnetic Resonance Microscopy at 15.2T
Authors:
Benjamin M. Hardy,
Gary Drake,
Shuyang Chai,
Bibek Dhakal,
Jonathan B. Martin,
Junzhong Xu,
Mark D. Does,
Adam W. Anderson,
Xinqiang Yan,
John C. Gore
Abstract:
Signal to noise ratios (SNR) in magnetic resonance microscopy images are limited by acquisition times and the decreasing number of spins in smaller voxels. Significant SNR gains from cooling of the RF receiver are only realized when the Johnson noise generated within the RF hardware is large compared to the electromagnetic noise produced by the sample. Cryogenic cooling of imaging probes is common…
▽ More
Signal to noise ratios (SNR) in magnetic resonance microscopy images are limited by acquisition times and the decreasing number of spins in smaller voxels. Significant SNR gains from cooling of the RF receiver are only realized when the Johnson noise generated within the RF hardware is large compared to the electromagnetic noise produced by the sample. Cryogenic cooling of imaging probes is common in high field systems but proves difficult to insulate the sample from extreme temperatures. We designed a chamber to cool only the tune and match circuitry to show it is possible to achieve much of the available SNR gain available for cooled coils. We designed a microcoil circuit to resonate at 650 MHz for imaging on a 15.2 T scanner. Surface loops and solenoids of varying diameters were tested to determine the largest diameter coil that demonstrated significant SNR gains from cooling. A liquid N2 cryochamber was designed to cool the circuitry while leaving the RF coil in ambient air. As the cryochamber was filled with liquid N2, Q-factors were measured on the bench while monitoring the coil's surface temperature. Improvements of SNR on images of solutions were demonstrated via cooling the tune and match circuit in the magnet bore. At 650 MHz, loops and solenoids < 3 mm in diameter showed significant improvements in quality factor on the bench. The resistance of the variable capacitors and the coaxial cable were measured to be 45% and 32% of room temperature values near the Larmor frequency. Images obtained with a 2 turn, 3 mm diameter loop with the matching circuit at room temperature and then cooled with liquid nitrogen demonstrated SNR improvements of a factor of 2. By cooling the tune and match circuit and leaving the surface loop in ambient air, SNR was improved by a factor of 2. The results are significant because it allows for more space to insulate the sample from extreme temperatures.
△ Less
Submitted 24 August, 2023;
originally announced August 2023.
-
A Measurement of Gravitational Lensing of the Cosmic Microwave Background Using SPT-3G 2018 Data
Authors:
Z. Pan,
F. Bianchini,
W. L. K. Wu,
P. A. R. Ade,
Z. Ahmed,
E. Anderes,
A. J. Anderson,
B. Ansarinejad,
M. Archipley,
K. Aylor,
L. Balkenhol,
P. S. Barry,
R. Basu Thakur,
K. Benabed,
A. N. Bender,
B. A. Benson,
L. E. Bleem,
F. R. Bouchet,
L. Bryant,
K. Byrum,
E. Camphuis,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang
, et al. (111 additional authors not shown)
Abstract:
We present a measurement of gravitational lensing over 1500 deg$^2$ of the Southern sky using SPT-3G temperature data at 95 and 150 GHz taken in 2018. The lensing amplitude relative to a fiducial Planck 2018 $Λ$CDM cosmology is found to be $1.020\pm0.060$, excluding instrumental and astrophysical systematic uncertainties. We conduct extensive systematic and null tests to check the robustness of th…
▽ More
We present a measurement of gravitational lensing over 1500 deg$^2$ of the Southern sky using SPT-3G temperature data at 95 and 150 GHz taken in 2018. The lensing amplitude relative to a fiducial Planck 2018 $Λ$CDM cosmology is found to be $1.020\pm0.060$, excluding instrumental and astrophysical systematic uncertainties. We conduct extensive systematic and null tests to check the robustness of the lensing measurements, and report a minimum-variance combined lensing power spectrum over angular multipoles of $50<L<2000$, which we use to constrain cosmological models. When analyzed alone and jointly with primary cosmic microwave background (CMB) spectra within the $Λ$CDM model, our lensing amplitude measurements are consistent with measurements from SPT-SZ, SPTpol, ACT, and Planck. Incorporating loose priors on the baryon density and other parameters including uncertainties on a foreground bias template, we obtain a $1σ$ constraint on $σ_8 Ω_{\rm m}^{0.25}=0.595 \pm 0.026$ using the SPT-3G 2018 lensing data alone, where $σ_8$ is a common measure of the amplitude of structure today and $Ω_{\rm m}$ is the matter density parameter. Combining SPT-3G 2018 lensing measurements with baryon acoustic oscillation (BAO) data, we derive parameter constraints of $σ_8 = 0.810 \pm 0.033$, $S_8 \equiv σ_8(Ω_{\rm m}/0.3)^{0.5}= 0.836 \pm 0.039$, and Hubble constant $H_0 =68.8^{+1.3}_{-1.6}$ km s$^{-1}$ Mpc$^{-1}$. Using CMB anisotropy and lensing measurements from SPT-3G only, we provide independent constraints on the spatial curvature of $Ω_{K} = 0.014^{+0.023}_{-0.026}$ (95% C.L.) and the dark energy density of $Ω_Λ= 0.722^{+0.031}_{-0.026}$ (68% C.L.). When combining SPT-3G lensing data with SPT-3G CMB anisotropy and BAO data, we find an upper limit on the sum of the neutrino masses of $\sum m_ν< 0.30$ eV (95% C.L.).
△ Less
Submitted 29 January, 2024; v1 submitted 22 August, 2023;
originally announced August 2023.
-
Towards Fast, Adaptive, and Hardware-Assisted User-Space Scheduling
Authors:
Lisa,
Li,
Nikita Lazarev,
David Koufaty,
Yijun Yin,
Andy Anderson,
Zhiru Zhang,
Edward Suh,
Kostis Kaffes,
Christina Delimitrou
Abstract:
Modern datacenter applications are prone to high tail latencies since their requests typically follow highly-dispersive distributions. Delivering fast interrupts is essential to reducing tail latency. Prior work has proposed both OS- and system-level solutions to reduce tail latencies for microsecond-scale workloads through better scheduling. Unfortunately, existing approaches like customized data…
▽ More
Modern datacenter applications are prone to high tail latencies since their requests typically follow highly-dispersive distributions. Delivering fast interrupts is essential to reducing tail latency. Prior work has proposed both OS- and system-level solutions to reduce tail latencies for microsecond-scale workloads through better scheduling. Unfortunately, existing approaches like customized dataplane OSes, require significant OS changes, experience scalability limitations, or do not reach the full performance capabilities hardware offers.
The emergence of new hardware features like UINTR exposed new opportunities to rethink the design paradigms and abstractions of traditional scheduling systems. We propose LibPreemptible, a preemptive user-level threading library that is flexible, lightweight, and adaptive. LibPreemptible was built with a set of optimizations like LibUtimer for scalability, and deadline-oriented API for flexible policies, time-quantum controller for adaptiveness. Compared to the prior state-of-the-art scheduling system Shinjuku, our system achieves significant tail latency and throughput improvements for various workloads without modifying the kernel. We also demonstrate the flexibility of LibPreemptible across scheduling policies for real applications experiencing varying load levels and characteristics.
△ Less
Submitted 11 November, 2023; v1 submitted 5 August, 2023;
originally announced August 2023.
-
Demonstrating a superconducting dual-rail cavity qubit with erasure-detected logical measurements
Authors:
Kevin S. Chou,
Tali Shemma,
Heather McCarrick,
Tzu-Chiao Chien,
James D. Teoh,
Patrick Winkel,
Amos Anderson,
Jonathan Chen,
Jacob Curtis,
Stijn J. de Graaf,
John W. O. Garmon,
Benjamin Gudlewski,
William D. Kalfus,
Trevor Keen,
Nishaad Khedkar,
Chan U Lei,
Gangqiang Liu,
Pinlei Lu,
Yao Lu,
Aniket Maiti,
Luke Mastalli-Kelly,
Nitish Mehta,
Shantanu O. Mundhada,
Anirudh Narla,
Taewan Noh
, et al. (9 additional authors not shown)
Abstract:
A critical challenge in develo** scalable error-corrected quantum systems is the accumulation of errors while performing operations and measurements. One promising approach is to design a system where errors can be detected and converted into erasures. Such a system utilizing erasure qubits are known to have relaxed requirements for quantum error correction. A recent proposal aims to do this usi…
▽ More
A critical challenge in develo** scalable error-corrected quantum systems is the accumulation of errors while performing operations and measurements. One promising approach is to design a system where errors can be detected and converted into erasures. Such a system utilizing erasure qubits are known to have relaxed requirements for quantum error correction. A recent proposal aims to do this using a dual-rail encoding with superconducting cavities. However, experimental characterization and demonstration of a dual-rail cavity qubit has not yet been realized. In this work, we implement such a dual-rail cavity qubit; we demonstrate a projective logical measurement with integrated erasure detection and use it to measure dual-rail qubit idling errors. We measure logical state preparation and measurement errors at the $0.01\%$-level and detect over $99\%$ of cavity decay events as erasures. We use the precision of this new measurement protocol to distinguish different types of errors in this system, finding that while decay errors occur with probability $\sim 0.2\%$ per microsecond, phase errors occur 6 times less frequently and bit flips occur at least 140 times less frequently. These findings represent the first confirmation of the expected error hierarchy necessary to concatenate dual-rail erasure qubits into a highly efficient erasure code.
△ Less
Submitted 13 October, 2023; v1 submitted 6 July, 2023;
originally announced July 2023.
-
A millimeter-wave atomic receiver
Authors:
Remy Legaie,
Georg Raithel,
David A. Anderson
Abstract:
Rydberg quantum sensors are sensitive to radio-frequency fields across an ultra-wide frequency range spanning megahertz to terahertz electromagnetic waves resonant with Rydberg atom dipole transitions. Here we demonstrate an atomic millimeter-wave heterodyne receiver employing continuous-wave lasers stabilized to an optical frequency comb. We characterize the atomic receiver in the W-band at signa…
▽ More
Rydberg quantum sensors are sensitive to radio-frequency fields across an ultra-wide frequency range spanning megahertz to terahertz electromagnetic waves resonant with Rydberg atom dipole transitions. Here we demonstrate an atomic millimeter-wave heterodyne receiver employing continuous-wave lasers stabilized to an optical frequency comb. We characterize the atomic receiver in the W-band at signal frequency of $f$=95.992512~GHz, and demonstrate a sensitivity of 7.9$μ$V/m/$\sqrt{Hz}$ and a linear dynamic range of 70dB. We develop frequency selectivity metrics for atomic receivers and demonstrate their use in our millimeter-wave receiver, including signal rejection levels at signal frequency offsets $Δf/f$ = 10$^{-4}$, 10$^{-5}$ and 10$^{-6}$, 3-dB, 6-dB, 9-dB and 12-dB bandwidths, filter roll-off, and shape factor analysis. Our work represents an important advance towards future studies and applications of atomic receiver science and technology and in weak millimeter-wave and high-frequency signal detection.
△ Less
Submitted 29 June, 2023;
originally announced June 2023.
-
Semi-automated extraction of research topics and trends from NCI funding in radiological sciences from 2000-2020
Authors:
Mark Nguyen,
Peter Beidler,
Joseph Tsai,
August Anderson,
Daniel Chen,
Paul Kinahan,
John Kang
Abstract:
Investigators, funders, and the public desire knowledge on topics and trends in publicly funded research but current efforts in manual categorization are limited in scale and understanding. We developed a semi-automated approach to extract and name research topics, and applied this to \$1.9B of NCI funding over 21 years in the radiological sciences to determine micro- and macro-scale research topi…
▽ More
Investigators, funders, and the public desire knowledge on topics and trends in publicly funded research but current efforts in manual categorization are limited in scale and understanding. We developed a semi-automated approach to extract and name research topics, and applied this to \$1.9B of NCI funding over 21 years in the radiological sciences to determine micro- and macro-scale research topics and funding trends. Our method relies on sequential clustering of existing biomedical-based word embeddings, naming using subject matter experts, and visualization to discover trends at a macroscopic scale above individual topics. We present results using 15 and 60 cluster topics, where we found that 2D projection of grant embeddings reveals two dominant axes: physics-biology and therapeutic-diagnostic. For our dataset, we found that funding for therapeutics- and physics-based research have outpaced diagnostics- and biology-based research, respectively. We hope these results may (1) give insight to funders on the appropriateness of their funding allocation, (2) assist investigators in contextualizing their work and explore neighboring research domains, and (3) allow the public to review where their tax dollars are being allocated.
△ Less
Submitted 22 June, 2023;
originally announced June 2023.
-
Inverse Protein Folding Using Deep Bayesian Optimization
Authors:
Natalie Maus,
Yimeng Zeng,
Daniel Allen Anderson,
Phillip Maffettone,
Aaron Solomon,
Peyton Greenside,
Osbert Bastani,
Jacob R. Gardner
Abstract:
Inverse protein folding -- the task of predicting a protein sequence from its backbone atom coordinates -- has surfaced as an important problem in the "top down", de novo design of proteins. Contemporary approaches have cast this problem as a conditional generative modelling problem, where a large generative model over protein sequences is conditioned on the backbone. While these generative models…
▽ More
Inverse protein folding -- the task of predicting a protein sequence from its backbone atom coordinates -- has surfaced as an important problem in the "top down", de novo design of proteins. Contemporary approaches have cast this problem as a conditional generative modelling problem, where a large generative model over protein sequences is conditioned on the backbone. While these generative models very rapidly produce promising sequences, independent draws from generative models may fail to produce sequences that reliably fold to the correct backbone. Furthermore, it is challenging to adapt pure generative approaches to other settings, e.g., when constraints exist. In this paper, we cast the problem of improving generated inverse folds as an optimization problem that we solve using recent advances in "deep" or "latent space" Bayesian optimization. Our approach consistently produces protein sequences with greatly reduced structural error to the target backbone structure as measured by TM score and RMSD while using fewer computational resources. Additionally, we demonstrate other advantages of an optimization-based approach to the problem, such as the ability to handle constraints.
△ Less
Submitted 24 May, 2023;
originally announced May 2023.
-
The ACROBAT 2022 Challenge: Automatic Registration Of Breast Cancer Tissue
Authors:
Philippe Weitz,
Masi Valkonen,
Leslie Solorzano,
Circe Carr,
Kimmo Kartasalo,
Constance Boissin,
Sonja Koivukoski,
Aino Kuusela,
Dusan Rasic,
Yanbo Feng,
Sandra Sinius Pouplier,
Abhinav Sharma,
Kajsa Ledesma Eriksson,
Stephanie Robertson,
Christian Marzahl,
Chandler D. Gatenbee,
Alexander R. A. Anderson,
Marek Wodzinski,
Artur Jurgas,
Niccolò Marini,
Manfredo Atzori,
Henning Müller,
Daniel Budelmann,
Nick Weiss,
Stefan Heldmann
, et al. (16 additional authors not shown)
Abstract:
The alignment of tissue between histopathological whole-slide-images (WSI) is crucial for research and clinical applications. Advances in computing, deep learning, and availability of large WSI datasets have revolutionised WSI analysis. Therefore, the current state-of-the-art in WSI registration is unclear. To address this, we conducted the ACROBAT challenge, based on the largest WSI registration…
▽ More
The alignment of tissue between histopathological whole-slide-images (WSI) is crucial for research and clinical applications. Advances in computing, deep learning, and availability of large WSI datasets have revolutionised WSI analysis. Therefore, the current state-of-the-art in WSI registration is unclear. To address this, we conducted the ACROBAT challenge, based on the largest WSI registration dataset to date, including 4,212 WSIs from 1,152 breast cancer patients. The challenge objective was to align WSIs of tissue that was stained with routine diagnostic immunohistochemistry to its H&E-stained counterpart. We compare the performance of eight WSI registration algorithms, including an investigation of the impact of different WSI properties and clinical covariates. We find that conceptually distinct WSI registration methods can lead to highly accurate registration performances and identify covariates that impact performances across methods. These results establish the current state-of-the-art in WSI registration and guide researchers in selecting and develo** methods.
△ Less
Submitted 29 May, 2023;
originally announced May 2023.
-
Generating Faithful Synthetic Data with Large Language Models: A Case Study in Computational Social Science
Authors:
Veniamin Veselovsky,
Manoel Horta Ribeiro,
Akhil Arora,
Martin Josifoski,
Ashton Anderson,
Robert West
Abstract:
Large Language Models (LLMs) have democratized synthetic data generation, which in turn has the potential to simplify and broaden a wide gamut of NLP tasks. Here, we tackle a pervasive problem in synthetic data generation: its generative distribution often differs from the distribution of real-world data researchers care about (in other words, it is unfaithful). In a case study on sarcasm detectio…
▽ More
Large Language Models (LLMs) have democratized synthetic data generation, which in turn has the potential to simplify and broaden a wide gamut of NLP tasks. Here, we tackle a pervasive problem in synthetic data generation: its generative distribution often differs from the distribution of real-world data researchers care about (in other words, it is unfaithful). In a case study on sarcasm detection, we study three strategies to increase the faithfulness of synthetic data: grounding, filtering, and taxonomy-based generation. We evaluate these strategies using the performance of classifiers trained with generated synthetic data on real-world data. While all three strategies improve the performance of classifiers, we find that grounding works best for the task at hand. As synthetic data generation plays an ever-increasing role in NLP research, we expect this work to be a step** stone in improving its utility. We conclude this paper with some recommendations on how to generate high(er)-fidelity synthetic data for specific tasks.
△ Less
Submitted 24 May, 2023;
originally announced May 2023.
-
Electrically controllable exchange bias via interface magnetoelectric effect
Authors:
Adam B. Cahaya,
Ansell Alvarez Anderson,
Anugrah Azhar,
Muhammad Aziz Majidi
Abstract:
Exchange bias is a unidirectional magnetic anisotropy that often arise from interfacial interaction of a ferromagnetic and antiferromagnetic layers. In this article, we show that a metallic layer with spin-orbit coupling can induces an exchange bias via an interface magnetoelectric effect. In linear response regime, the interface magnetoelectric effect is induced by spin-orbit couplings that arise…
▽ More
Exchange bias is a unidirectional magnetic anisotropy that often arise from interfacial interaction of a ferromagnetic and antiferromagnetic layers. In this article, we show that a metallic layer with spin-orbit coupling can induces an exchange bias via an interface magnetoelectric effect. In linear response regime, the interface magnetoelectric effect is induced by spin-orbit couplings that arises from the broken symmetry of the system. Furthermore, we demonstrate that the exchange bias can be controlled by electric field.
△ Less
Submitted 5 June, 2023; v1 submitted 21 May, 2023;
originally announced May 2023.
-
The Spatial Correlation of High Mass X-ray Binaries and Young Star Clusters in Nearby Star-Forming Galaxies
Authors:
Breanna A. Binder,
Ashley K. Anderson,
Kristen Garofali,
Margaret Lazzarini,
Benjamin F. Williams
Abstract:
We present an analysis of the two-point spatial correlation functions of high-mass X-ray binary (HMXB) and young star cluster (YSC) populations in M31 and M33. We find evidence that HMXBs are spatially correlated with YSCs to a higher degree than would be expected from random chance in both galaxies. When supplemented with similar studies in the Milky Way, Small Magellanic Cloud, and NGC 4449, we…
▽ More
We present an analysis of the two-point spatial correlation functions of high-mass X-ray binary (HMXB) and young star cluster (YSC) populations in M31 and M33. We find evidence that HMXBs are spatially correlated with YSCs to a higher degree than would be expected from random chance in both galaxies. When supplemented with similar studies in the Milky Way, Small Magellanic Cloud, and NGC 4449, we find that the peak value of the spatial correlation function correlates strongly with the specific star formation rate of the host galaxy. We additionally perform an X-ray stacking analysis of 211 non-X-ray detected YSCs in M31 and 463 YSCs in M33. We do not detect excess X-ray emission at the stacked cluster locations down to 3$σ$ upper limits of $\sim10^{33}$ erg s$^{-1}$ (0.35-8 keV) in both galaxies, which strongly suggests that dynamical formation within YSCs is not a major HMXB formation channel. We interpret our results in the context of (1) the recent star formation histories of the galaxies, which may produce differences in the demographics of compact objects powering the HMXBs, and (2) the differences in natal kicks experienced by compact objects during formation, which can eject newly-formed HMXB from their birth clusters.
△ Less
Submitted 2 May, 2023;
originally announced May 2023.
-
Reddit in the Time of COVID
Authors:
Veniamin Veselovsky,
Ashton Anderson
Abstract:
When the COVID-19 pandemic hit, much of life moved online. Platforms of all types reported surges of activity, and people remarked on the various important functions that online platforms suddenly fulfilled. However, researchers lack a rigorous understanding of the pandemic's impacts on social platforms, and whether they were temporary or long-lasting. We present a conceptual framework for studyin…
▽ More
When the COVID-19 pandemic hit, much of life moved online. Platforms of all types reported surges of activity, and people remarked on the various important functions that online platforms suddenly fulfilled. However, researchers lack a rigorous understanding of the pandemic's impacts on social platforms, and whether they were temporary or long-lasting. We present a conceptual framework for studying the large-scale evolution of social platforms and apply it to the study of Reddit's history, with a particular focus on the COVID-19 pandemic. We study platform evolution through two key dimensions: structure vs. content and macro- vs. micro-level analysis. Structural signals help us quantify how much behavior changed, while content analysis clarifies exactly how it changed. Applying these at the macro-level illuminates platform-wide changes, while at the micro-level we study impacts on individual users. We illustrate the value of this approach by showing the extraordinary and ordinary changes Reddit went through during the pandemic. First, we show that typically when rapid growth occurs, it is driven by a few concentrated communities and within a narrow slice of language use. However, Reddit's growth throughout COVID-19 was spread across disparate communities and languages. Second, all groups were equally affected in their change of interest, but veteran users tended to invoke COVID-related language more than newer users. Third, the new wave of users that arrived following COVID-19 was fundamentally different from previous cohorts of new users in terms of interests, activity, and likelihood of staying active on the platform. These findings provide a more rigorous understanding of how an online platform changed during the global pandemic.
△ Less
Submitted 21 April, 2023;
originally announced April 2023.
-
Large Language Models Based Automatic Synthesis of Software Specifications
Authors:
Shantanu Mandal,
Adhrik Chethan,
Vahid Janfaza,
S M Farabi Mahmud,
Todd A Anderson,
Javier Turek,
Jesmin Jahan Tithi,
Abdullah Muzahid
Abstract:
Software configurations play a crucial role in determining the behavior of software systems. In order to ensure safe and error-free operation, it is necessary to identify the correct configuration, along with their valid bounds and rules, which are commonly referred to as software specifications. As software systems grow in complexity and scale, the number of configurations and associated specific…
▽ More
Software configurations play a crucial role in determining the behavior of software systems. In order to ensure safe and error-free operation, it is necessary to identify the correct configuration, along with their valid bounds and rules, which are commonly referred to as software specifications. As software systems grow in complexity and scale, the number of configurations and associated specifications required to ensure the correct operation can become large and prohibitively difficult to manipulate manually. Due to the fast pace of software development, it is often the case that correct software specifications are not thoroughly checked or validated within the software itself. Rather, they are frequently discussed and documented in a variety of external sources, including software manuals, code comments, and online discussion forums. Therefore, it is hard for the system administrator to know the correct specifications of configurations due to the lack of clarity, organization, and a centralized unified source to look at. To address this challenge, we propose SpecSyn a framework that leverages a state-of-the-art large language model to automatically synthesize software specifications from natural language sources. Our approach formulates software specification synthesis as a sequence-to-sequence learning problem and investigates the extraction of specifications from large contextual texts. This is the first work that uses a large language model for end-to-end specification synthesis from natural language texts. Empirical results demonstrate that our system outperforms prior the state-of-the-art specification synthesis tool by 21% in terms of F1 score and can find specifications from single as well as multiple sentences.
△ Less
Submitted 17 April, 2023;
originally announced April 2023.
-
Characterization of MKIDs for CMB observation at 220 GHz with the South Pole Telescope
Authors:
Karia R. Dibert,
Peter S. Barry,
Adam J. Anderson,
Bradford A. Benson,
Thomas Cecil,
Clarence L. Chang,
Kyra N. Fichman,
Kirit Karkare,
Juliang Li,
Tyler Natoli,
Zhaodi Pan,
Maclean Rouble,
Erik Shirokoff,
Matthew Young
Abstract:
We present an updated design of the 220 GHz microwave kinetic inductance detector (MKID) pixel for SPT-3G+, the next-generation camera for the South Pole Telescope. We show results of the dark testing of a 63-pixel array with mean inductor quality factor $Q_i = 4.8 \times 10^5$, aluminum inductor transition temperature $T_c = 1.19$ K, and kinetic inductance fraction $α_k = 0.32$. We optically char…
▽ More
We present an updated design of the 220 GHz microwave kinetic inductance detector (MKID) pixel for SPT-3G+, the next-generation camera for the South Pole Telescope. We show results of the dark testing of a 63-pixel array with mean inductor quality factor $Q_i = 4.8 \times 10^5$, aluminum inductor transition temperature $T_c = 1.19$ K, and kinetic inductance fraction $α_k = 0.32$. We optically characterize both the microstrip-coupled and CPW-coupled resonators, and find both have a spectral response close to prediction with an optical efficiency of $η\sim 70\%$. However, we find slightly lower optical response on the lower edge of the band than predicted, with neighboring dark detectors showing more response in this region, though at level consistent with less than 5\% frequency shift relative to the optical detectors. The detectors show polarized response consistent with expectations, with a cross-polar response of $\sim 10\%$ for both detector orientations.
△ Less
Submitted 3 April, 2023;
originally announced April 2023.
-
Noise Optimization for MKIDs with Different Design Geometries and Material Selections
Authors:
Z. Pan,
K. R. Dibert,
J. Zhang,
P. S. Barry,
A. J. Anderson,
A. N. Bender,
B. A. Benson,
T. Cecil,
C. L. Chang,
R. Gualtieri,
J. Li,
M. Lisovenko,
V. Novosad,
M. Rouble,
G. Wang,
V. Yefremenko
Abstract:
The separation and optimization of noise components is critical to microwave-kinetic inductance detector (MKID) development. We analyze the effect of several changes to the lumped-element inductor and interdigitated capacitor geometry on the noise performance of a series of MKIDs intended for millimeter-wavelength experiments. We extract the contributions from two-level system noise in the dielect…
▽ More
The separation and optimization of noise components is critical to microwave-kinetic inductance detector (MKID) development. We analyze the effect of several changes to the lumped-element inductor and interdigitated capacitor geometry on the noise performance of a series of MKIDs intended for millimeter-wavelength experiments. We extract the contributions from two-level system noise in the dielectric layer, the generation-recombination noise intrinsic to the superconducting thin-film, and system white noise from each detector noise power spectrum and characterize how these noise components depend on detector geometry, material, and measurement conditions such as driving power and temperature. We observe a reduction in the amplitude of two-level system noise with both an elevated sample temperature and an increased gap between the fingers within the interdigitated capacitors for both aluminum and niobium detectors. We also verify the expected reduction of the generation-recombination noise and associated quasiparticle lifetime with reduced inductor volume. This study also iterates over different materials, including aluminum, niobium, and aluminum manganese, and compares the results with an underlying physical model.
△ Less
Submitted 3 April, 2023;
originally announced April 2023.
-
Fabrication Development for SPT-SLIM, a Superconducting Spectrometer for Line Intensity Map**
Authors:
T. Cecil,
C. Albert,
A. J. Anderson,
P. S. Barry,
B. Benson,
C. Cotter,
C. Chang,
M. Dobbs,
K. Dibert,
R. Gualtieri,
K. S. Karkare,
M. Lisovenko,
D. P. Marrone,
J. Montgomery,
Z. Pan,
G. Robson,
M. Rouble,
E. Shirokoff,
G. Smecher,
G. Wang,
V. Yefremenko
Abstract:
Line Intensity Map** (LIM) is a new observational technique that uses low-resolution observations of line emission to efficiently trace the large-scale structure of the Universe out to high redshift. Common mm/sub-mm emission lines are accessible from ground-based observatories, and the requirements on the detectors for LIM at mm-wavelengths are well matched to the capabilities of large-format a…
▽ More
Line Intensity Map** (LIM) is a new observational technique that uses low-resolution observations of line emission to efficiently trace the large-scale structure of the Universe out to high redshift. Common mm/sub-mm emission lines are accessible from ground-based observatories, and the requirements on the detectors for LIM at mm-wavelengths are well matched to the capabilities of large-format arrays of superconducting sensors. We describe the development of an R = 300 on-chip superconducting filter-bank spectrometer covering the 120--180 GHz band optimized for future mm-LIM experiments, focusing on SPT-SLIM, a pathfinder LIM instrument for the South Pole Telescope. Radiation is coupled from the telescope optical system to the spectrometer chip via an array of feedhorn-coupled orthomode transducers. Superconducting microstrip transmission lines then carry the signal to an array of channelizing half-wavelength resonators, and the output of each spectral channel is sensed by a lumped element kinetic inductance detector (leKID). Key areas of development include incorporating new low-loss dielectrics to improve both the achievable spectral resolution and optical efficiency and development of a robust fabrication process to create a galvanic connection between ultra-pure superconducting thin-films to realize multi-material (hybrid) leKIDs. We provide an overview of the spectrometer design, fabrication process, and prototype devices.
△ Less
Submitted 3 April, 2023;
originally announced April 2023.
-
Simultaneous Millimeter-wave, Gamma-ray, and Optical Monitoring of the Blazar PKS 2326-502 During a Flaring State
Authors:
J. C. Hood II,
A. Simpson,
A. McDaniel,
A. Foster,
P. A. R. Ade,
M. Ajello,
A. J. Anderson,
J. E. Austermann,
J. A. Beall,
A. N. Bender,
B. A. Benson,
F. Bianchini,
L. E. Bleem,
J. E. Carlstrom,
C. L. Chang,
P. Chaubal,
H. C. Chiang,
T-L. Chou,
R. Citron,
C. Corbett Moran,
T. M. Crawford,
A. T. Crites,
T. de Haan,
M. A. Dobbs,
W. Everett
, et al. (44 additional authors not shown)
Abstract:
Including millimeter-wave (mm-wave) data in multi-wavelength studies of the variability of active galactic nuclei (AGN) can provide insights into AGN physics that are not easily accessible at other wavelengths. We demonstrate in this work the potential of cosmic microwave background (CMB) telescopes to provide long-term, high-cadence mm-wave AGN monitoring over large fractions of sky. We report on…
▽ More
Including millimeter-wave (mm-wave) data in multi-wavelength studies of the variability of active galactic nuclei (AGN) can provide insights into AGN physics that are not easily accessible at other wavelengths. We demonstrate in this work the potential of cosmic microwave background (CMB) telescopes to provide long-term, high-cadence mm-wave AGN monitoring over large fractions of sky. We report on a pilot study using data from the SPTpol instrument on the South Pole Telescope (SPT), which was designed to observe the CMB at arcminute and larger angular scales. Between 2013 and 2016, SPTpol was used primarily to observe a single 500 deg^2 field, covering the entire field several times per day with detectors sensitive to radiation in bands centered at 95 and 150 GHz. We use SPT 150 GHz observations to create AGN light curves, and we compare these mm-wave light curves to those at other wavelengths, in particular gamma-ray and optical. In this Letter, we focus on a single source, PKS 2326-502, which has extensive, day-timescale monitoring data in gamma-ray, optical, and now mm-wave between 2013 and 2016. We find PKS 2326-502 to be in a flaring state in the first two years of this monitoring, and we present a search for evidence of correlated variability between mm-wave, optical R band, and gamma-ray observations. This pilot study is paving the way for AGN monitoring with current and upcoming CMB experiments such as SPT-3G, Simons Observatory, and CMB-S4, including multi-wavelength studies with facilities such as VRO-LSST.
△ Less
Submitted 28 February, 2023;
originally announced February 2023.
-
Experimental demonstration of diffusion limitations on resolution and SNR in MR microscopy
Authors:
Benjamin M. Hardy,
Yue Zhu,
Kevin D. Harkins,
Bibek Dhakal,
Jonathan B. Martin,
Junzhong Xu,
Mark D. Does,
Adam W. Anderson,
John C. Gore
Abstract:
Magnetic resonance microscopy images at cellular resolution (< 10 microns) are limited by diffusion. SNR and spatial resolution suffer from the dephasing of transverse magnetization caused by diffusion of spins in strong gradients. Such effects may be reduced by using phase encoding instead of frequency encoding readout gradients. Demonstration of the benefits of phase encoding are lacking, and th…
▽ More
Magnetic resonance microscopy images at cellular resolution (< 10 microns) are limited by diffusion. SNR and spatial resolution suffer from the dephasing of transverse magnetization caused by diffusion of spins in strong gradients. Such effects may be reduced by using phase encoding instead of frequency encoding readout gradients. Demonstration of the benefits of phase encoding are lacking, and the conditions in which it is preferred are not clearly established. We quantify when phase encoding outperforms a readout gradient with emphasis on the detrimental effects of diffusion on SNR and resolution. A 15.2T MRI scanner, with 1 T/m gradients, and micro solenoid RF coils < 1 mm in diameter, were used to quantify diffusion effects on resolution and SNR of frequency and phase encoded acquisitions. Frequency and phase encoding resolution and SNR per square root time were calculated and measured for images at the diffusion limited resolution. The point-spread-function was measured for phase and frequency encoding using additional constant time gradients with voxels 3-15 microns. The effect of diffusion during the readout gradient on SNR was experimentally demonstrated. The achieved resolutions of frequency and phase encoded acquisitions were measured via the point-spread-function. SNR per square root time and actual resolution were calculated for a wide range of gradient amplitudes, diffusion coefficients, and relaxation properties. The results provide a practical guide on how to choose between phase and frequency encoding. Images of excised rat spinal cord at 10 x 10 microns in-plane demonstrate benefits of phase encoding in the form of higher measured resolution and SNR vs the same image acquired with a conventional readout. We demonstrate the extent to which phase encoding outperforms readout gradients in SNR and resolution over a wide range of voxel sizes, sample, and hardware properties.
△ Less
Submitted 3 January, 2023; v1 submitted 2 January, 2023;
originally announced January 2023.
-
PIM: Video Coding using Perceptual Importance Maps
Authors:
Evgenya Pergament,
Pulkit Tandon,
Oren Rippel,
Lubomir Bourdev,
Alexander G. Anderson,
Bruno Olshausen,
Tsachy Weissman,
Sachin Katti,
Kedar Tatwawadi
Abstract:
Human perception is at the core of lossy video compression, with numerous approaches developed for perceptual quality assessment and improvement over the past two decades. In the determination of perceptual quality, different spatio-temporal regions of the video differ in their relative importance to the human viewer. However, since it is challenging to infer or even collect such fine-grained info…
▽ More
Human perception is at the core of lossy video compression, with numerous approaches developed for perceptual quality assessment and improvement over the past two decades. In the determination of perceptual quality, different spatio-temporal regions of the video differ in their relative importance to the human viewer. However, since it is challenging to infer or even collect such fine-grained information, it is often not used during compression beyond low-level heuristics. We present a framework which facilitates research into fine-grained subjective importance in compressed videos, which we then utilize to improve the rate-distortion performance of an existing video codec (x264). The contributions of this work are threefold: (1) we introduce a web-tool which allows scalable collection of fine-grained perceptual importance, by having users interactively paint spatio-temporal maps over encoded videos; (2) we use this tool to collect a dataset with 178 videos with a total of 14443 frames of human annotated spatio-temporal importance maps over the videos; and (3) we use our curated dataset to train a lightweight machine learning model which can predict these spatio-temporal importance regions. We demonstrate via a subjective study that encoding the videos in our dataset while taking into account the importance maps leads to higher perceptual quality at the same bitrate, with the videos encoded with importance maps preferred $1.8 \times$ over the baseline videos. Similarly, we show that for the 18 videos in test set, the importance maps predicted by our model lead to higher perceptual quality videos, $2 \times$ preferred over the baseline at the same bitrate.
△ Less
Submitted 9 April, 2023; v1 submitted 20 December, 2022;
originally announced December 2022.
-
A Measurement of the CMB Temperature Power Spectrum and Constraints on Cosmology from the SPT-3G 2018 TT/TE/EE Data Set
Authors:
L. Balkenhol,
D. Dutcher,
A. Spurio Mancini,
A. Doussot,
K. Benabed,
S. Galli,
P. A. R. Ade,
A. J. Anderson,
B. Ansarinejad,
M. Archipley,
A. N. Bender,
B. A. Benson,
F. Bianchini,
L. E. Bleem,
F. R. Bouchet,
L. Bryant,
E. Camphuis,
J. E. Carlstrom,
T. W. Cecil,
C. L. Chang,
P. Chaubal,
P. M. Chichura,
T. -L. Chou,
A. Coerver,
T. M. Crawford
, et al. (62 additional authors not shown)
Abstract:
We present a sample-variance-limited measurement of the temperature power spectrum ($TT$) of the cosmic microwave background (CMB) using observations of a $\sim\! 1500 \,\mathrm{deg}^2$ field made by SPT-3G in 2018. We report multifrequency power spectrum measurements at 95, 150, and 220GHz covering the angular multipole range $750 \leq \ell < 3000$. We combine this $TT$ measurement with the publi…
▽ More
We present a sample-variance-limited measurement of the temperature power spectrum ($TT$) of the cosmic microwave background (CMB) using observations of a $\sim\! 1500 \,\mathrm{deg}^2$ field made by SPT-3G in 2018. We report multifrequency power spectrum measurements at 95, 150, and 220GHz covering the angular multipole range $750 \leq \ell < 3000$. We combine this $TT$ measurement with the published polarization power spectrum measurements from the 2018 observing season and update their associated covariance matrix to complete the SPT-3G 2018 $TT/TE/EE$ data set. This is the first analysis to present cosmological constraints from SPT $TT$, $TE$, and $EE$ power spectrum measurements jointly. We blind the cosmological results and subject the data set to a series of consistency tests at the power spectrum and parameter level. We find excellent agreement between frequencies and spectrum types and our results are robust to the modeling of astrophysical foregrounds. We report results for $Λ$CDM and a series of extensions, drawing on the following parameters: the amplitude of the gravitational lensing effect on primary power spectra $A_\mathrm{L}$, the effective number of neutrino species $N_{\mathrm{eff}}$, the primordial helium abundance $Y_{\mathrm{P}}$, and the baryon clum** factor due to primordial magnetic fields $b$. We find that the SPT-3G 2018 $T/TE/EE$ data are well fit by $Λ$CDM with a probability-to-exceed of $15\%$. For $Λ$CDM, we constrain the expansion rate today to $H_0 = 68.3 \pm 1.5\,\mathrm{km\,s^{-1}\,Mpc^{-1}}$ and the combined structure growth parameter to $S_8 = 0.797 \pm 0.042$. The SPT-based results are effectively independent of Planck, and the cosmological parameter constraints from either data set are within $<1\,σ$ of each other. (abridged)
△ Less
Submitted 27 July, 2023; v1 submitted 11 December, 2022;
originally announced December 2022.
-
Coupling Semi-Analytic and N-body Galaxies (CoSANG) for cosmological stellar halo simulations I- Methods and the structure of dark matter halos
Authors:
Shahram Talei,
Krista Mccord,
Jeremy Bailin,
Darren J. Croton,
Alexandra Mannings,
Michael Sitarz,
Annelia Anderson,
Brooke Bailey,
Alexis Rollins
Abstract:
We present CoSANG (Coupling Semi-Analytic and N-body Galaxies), a new hybrid model for cosmological dark matter and stellar halo simulations. In this approach a collisionless model (Gadget3) is used for gravitational interactions while a coupled semi-analytic model (SAGE) calculates baryonic effects at each time-step. This live self-consistent interaction at each time-step is the key difference be…
▽ More
We present CoSANG (Coupling Semi-Analytic and N-body Galaxies), a new hybrid model for cosmological dark matter and stellar halo simulations. In this approach a collisionless model (Gadget3) is used for gravitational interactions while a coupled semi-analytic model (SAGE) calculates baryonic effects at each time-step. This live self-consistent interaction at each time-step is the key difference between CoSANG and traditional semi-analytic models that are mainly used for post-processing. By accounting for the gravitational effect of the baryons, CoSANG can overcome some of the deficiencies of pure N-body simulations, while being less computationally expensive than hydrodynamic simulations. Moreover CoSANG can produce stellar halo populations via tagging tracer dark matter particles. We demonstrate the performance and dynamical accuracy of this approach using both controlled test simulations and a set of three cosmological zoom-in simulations of Milky Way (MW) mass halos. We simulate each target halo both without the coupling (dark matter only, hereafter DMO) and with the coupling (CoSANG). We compare the internal structure (subhalo distribution, shape and orientation) of the halos. The following changes are observed in the CoSANG model compared to the DMO model: 1) the total number of subhaloes close to the center of the halo is reduced, 2) the $V_{\mathrm{max}}$ distribution peaks at a lower value and lies below the DMO model, 3) the axis ratio is smaller. The difference between DMO and CoSANG simulations is more significant in early forming halos.
△ Less
Submitted 9 November, 2022;
originally announced November 2022.
-
Synthesizing Programs with Continuous Optimization
Authors:
Shantanu Mandal,
Todd A. Anderson,
Javier Turek,
Justin Gottschlich,
Abdullah Muzahid
Abstract:
Automatic software generation based on some specification is known as program synthesis. Most existing approaches formulate program synthesis as a search problem with discrete parameters. In this paper, we present a novel formulation of program synthesis as a continuous optimization problem and use a state-of-the-art evolutionary approach, known as Covariance Matrix Adaptation Evolution Strategy t…
▽ More
Automatic software generation based on some specification is known as program synthesis. Most existing approaches formulate program synthesis as a search problem with discrete parameters. In this paper, we present a novel formulation of program synthesis as a continuous optimization problem and use a state-of-the-art evolutionary approach, known as Covariance Matrix Adaptation Evolution Strategy to solve the problem. We then propose a map** scheme to convert the continuous formulation into actual programs. We compare our system, called GENESYS, with several recent program synthesis techniques (in both discrete and continuous domains) and show that GENESYS synthesizes more programs within a fixed time budget than those existing schemes. For example, for programs of length 10, GENESYS synthesizes 28% more programs than those existing schemes within the same time budget.
△ Less
Submitted 3 April, 2023; v1 submitted 1 November, 2022;
originally announced November 2022.
-
A survey of open questions in adaptive therapy: bridging mathematics and clinical translation
Authors:
Jeffrey West,
Fred Adler,
Jill Gallaher,
Maximilian Strobl,
Renee Brady-Nicholls,
Joel S. Brown,
Mark Robertson-Tessi,
Eunjung Kim,
Robert Noble,
Yannick Viossat,
David Basanta,
Alexander R. A. Anderson
Abstract:
Adaptive therapy is a dynamic cancer treatment protocol that updates (or "adapts") treatment decisions in anticipation of evolving tumor dynamics. This broad term encompasses many possible dynamic treatment protocols of patient-specific dose modulation or dose timing. Adaptive therapy maintains high levels of tumor burden to benefit from the competitive suppression of treatment-sensitive subpopula…
▽ More
Adaptive therapy is a dynamic cancer treatment protocol that updates (or "adapts") treatment decisions in anticipation of evolving tumor dynamics. This broad term encompasses many possible dynamic treatment protocols of patient-specific dose modulation or dose timing. Adaptive therapy maintains high levels of tumor burden to benefit from the competitive suppression of treatment-sensitive subpopulations on treatment-resistant subpopulations. This evolution-based approach to cancer treatment has been integrated into several ongoing or planned clinical trials, including treatment of metastatic castrate resistant prostate cancer, ovarian cancer, and BRAF-mutant melanoma. In the previous few decades, experimental and clinical investigation of adaptive therapy has progressed synergistically with mathematical and computational modeling. In this work, we discuss 11 open questions in cancer adaptive therapy mathematical modeling. The questions are split into three sections: 1) the necessary components of mathematical models of adaptive therapy 2) design and validation of dosing protocols, and 3) challenges and opportunities in clinical translation.
△ Less
Submitted 18 October, 2022;
originally announced October 2022.
-
Inference and Prediction Using Functional Principal Components Analysis: Application to Diabetic Kidney Disease Progression in the Chronic Renal Insufficiency Cohort (CRIC) Study
Authors:
Brian Kwan,
Wei Yang,
Daniel Montemayor,
**g Zhang,
Tobias Fuhrer,
Amanda H. Anderson,
Cheryl A. M. Anderson,
**g Chen,
Ana C. Ricardo,
Sylvia E. Rosas,
Loki Natarajan,
the CRIC Study Investigators
Abstract:
Repeated longitudinal measurements are commonly used to model long-term disease progression, and timing and number of assessments per patient may vary, leading to irregularly spaced and sparse data. Longitudinal trajectories may exhibit curvilinear patterns, in which mixed linear regression methods may fail to capture true trends in the data. We applied functional principal components analysis to…
▽ More
Repeated longitudinal measurements are commonly used to model long-term disease progression, and timing and number of assessments per patient may vary, leading to irregularly spaced and sparse data. Longitudinal trajectories may exhibit curvilinear patterns, in which mixed linear regression methods may fail to capture true trends in the data. We applied functional principal components analysis to model kidney disease progression via estimated glomerular filtration rate (eGFR) trajectories. In a cohort of 2641 participants with diabetes and up to 15 years of annual follow-up from the Chronic Renal Insufficiency Cohort (CRIC) study, we detected novel dominant modes of variation and patterns of diabetic kidney disease (DKD) progression among subgroups defined by the presence of albuminuria. We conducted inferential permutation tests to assess differences in longitudinal eGFR patterns between groups. To determine whether fitting a full cohort model or separate group-specific models is more optimal for modeling long-term trajectories, we evaluated model fit, using our goodness-of-fit procedure, and future prediction accuracy. Our findings indicated advantages for both modeling approaches in accomplishing different objectives. Beyond DKD, the methods described are applicable to other settings with longitudinally assessed biomarkers as indicators of disease progression. Supplementary materials for this article are available online.
△ Less
Submitted 20 October, 2022;
originally announced October 2022.
-
Recommendations and guidelines from the ISMRM Diffusion Study Group for preclinical diffusion MRI: Part 2 -- Ex vivo imaging
Authors:
Kurt G Schilling,
Francesco Grussu,
Andrada Ianus,
Brian Hansen,
Rachel L C Barrett,
Manisha Aggarwal,
Stijn Michielse,
Fatima Nasrallah,
Warda Syeda,
Nian Wang,
Jelle Veraart,
Alard Roebroeck,
Andrew F Bagdasarian,
Cornelius Eichner,
Farshid Sepehrband,
Jan Zimmermann,
Lucas Soustelle,
Christien Bowman,
Benjamin C Tendler,
Andreea Hertanu,
Ben Jeurissen,
Lucio Frydman,
Yohan van de Looij,
David Hike,
Jeff F Dunn
, et al. (31 additional authors not shown)
Abstract:
The value of preclinical diffusion MRI (dMRI) is substantial. While dMRI enables in vivo non-invasive characterization of tissue, ex vivo dMRI is increasingly being used to probe tissue microstructure and brain connectivity. Ex vivo dMRI has several experimental advantages including higher signal-to-noise ratio and spatial resolution compared to in vivo studies, and more advanced diffusion contras…
▽ More
The value of preclinical diffusion MRI (dMRI) is substantial. While dMRI enables in vivo non-invasive characterization of tissue, ex vivo dMRI is increasingly being used to probe tissue microstructure and brain connectivity. Ex vivo dMRI has several experimental advantages including higher signal-to-noise ratio and spatial resolution compared to in vivo studies, and more advanced diffusion contrasts for improved microstructure and connectivity characterization. Another major advantage is direct comparison with histological data as a crucial methodological validation. However, there are a number of considerations that must be made when performing ex vivo experiments. The steps from tissue preparation, image acquisition and processing, and interpretation of results are complex, with many decisions that not only differ dramatically from in vivo imaging, but ultimately affect what questions can be answered using the data. This work represents 'Part 2' of a series of recommendations and considerations for preclinical dMRI, where we focus on best practices for dMRI of ex vivo tissue. We first describe the value that ex vivo imaging adds to the field of dMRI, followed by general considerations and foundational knowledge that must be considered when designing experiments. We then give guidelines for ex vivo protocols, including tissue preparation, imaging sequences and data processing including pre-processing, model-fitting, and tractography. Finally, we provide an online resource which lists publicly available ex vivo dMRI datasets and dedicated software packages. In each section, we attempt to provide guidelines and recommendations, but also highlight areas for which no guidelines exist, and where future work should lie. An overarching goal herein is to enhance the rigor and reproducibility of ex vivo dMRI acquisitions and analyses, and thereby advance biomedical knowledge.
△ Less
Submitted 7 February, 2023; v1 submitted 27 September, 2022;
originally announced September 2022.