Showing 1–6 of 6 results for author: Amooie, A

Evaluation of fatigue crack initiation using accumulated entropy

Authors: M. A. Amooie, H. Ghadimi, B. Hajshirmohammadi, M. M. Khonsari

Abstract: The accumulated entropy is used to evaluate the initiation of crack in flat notched specimen made of stainless steel 304. Two notch radii have been studied to capture the thermography of crack initiation and measure accumulated heat dissipation. It has been observed that under pull-push loading with an R-ratio of -1, the accumulated entropy for crack initiation and crack length's growth up to a sp… ▽ More The accumulated entropy is used to evaluate the initiation of crack in flat notched specimen made of stainless steel 304. Two notch radii have been studied to capture the thermography of crack initiation and measure accumulated heat dissipation. It has been observed that under pull-push loading with an R-ratio of -1, the accumulated entropy for crack initiation and crack length's growth up to a specific number, Fracture Fatigue Entropy remains nearly constant. Anaclastic deformation dissipation has been taken into account and a mathematical model based on Kelvin-Voigt type element has been discussed. The effect of anelastic deformation has been studied in terms of temperature evolution at the beginning of the test. △ Less

Submitted 26 August, 2022; v1 submitted 18 August, 2022; originally announced August 2022.

Comments: Paper was submitted without the consent of other authors to be publicly available

Growth morphology and symmetry selection of interfacial instabilities in anisotropic environments

Authors: Qing Zhang, Amin Amooie, Martin Z. Bazant, Irmgard Bischofberger

Abstract: The displacement of a fluid by another less viscous one in a quasi-two dimensional geometry typically leads to complex fingering patterns. In an isotropic system, dense-branching growth arises, which is characterized by repeated tip-splitting of evolving fingers. When anisotropy is present in the interfacial dynamics, the growth morphology changes to dendritic growth characterized by regular struc… ▽ More The displacement of a fluid by another less viscous one in a quasi-two dimensional geometry typically leads to complex fingering patterns. In an isotropic system, dense-branching growth arises, which is characterized by repeated tip-splitting of evolving fingers. When anisotropy is present in the interfacial dynamics, the growth morphology changes to dendritic growth characterized by regular structures. We introduce anisotropy by engraving a six-fold symmetric lattice of channels on a Hele-Shaw cell. We show that the morphology transition in miscible fluids depends not only on the previously reported degree of anisotropy set by the lattice topography, but also on the viscosity ratio between the two fluids. Remarkably, the viscosity ratio and the degree of anisotropy also govern the global features of the dendritic patterns, inducing a systematic change from six-fold towards twelve-fold symmetric dendrites. Varying either control parameter provides a new method to tune the symmetry of complex patterns, which may also have relevance for analogous phenomena of gradient-driven interfacial dynamics, such as directional solidification or electrodeposition. △ Less

Submitted 16 January, 2021; v1 submitted 5 April, 2020; originally announced April 2020.

Vortices of Electro-osmotic Flow in Heterogeneous Porous Media

Authors: Mohammad Mirzadeh, Tingtao Zhou, Mohammad Amin Amooie, Dimitrios Fraggedakis, Todd R. Ferguson, Martin Z. Bazant

Abstract: Traditional models of electrokinetic transport in porous media are based on homogenized material properties, which neglect any macroscopic effects of microscopic fluctuations. This perspective is taken not only for convenience, but also motivated by the expectation of irrotational electro-osmotic flow, proportional to the electric field, for uniformly charged surfaces (or constant zeta potential)… ▽ More Traditional models of electrokinetic transport in porous media are based on homogenized material properties, which neglect any macroscopic effects of microscopic fluctuations. This perspective is taken not only for convenience, but also motivated by the expectation of irrotational electro-osmotic flow, proportional to the electric field, for uniformly charged surfaces (or constant zeta potential) in the limit of thin double layers. Here, we show that the inherent heterogeneity of porous media generally leads to macroscopic vortex patterns, which have important implications for convective transport and mixing. These vortical flows originate due to competition between pressure-driven and electro-osmotic flows, and their size are characterized by the correlation length of heterogeneity in permeability or surface charge. The appearance of vortices is controlled by a single dimensionless control parameter, defined as the ratio of a typical electro-osmotic velocity to the total mean velocity. △ Less

Submitted 12 March, 2020; originally announced March 2020.

Journal ref: Phys. Rev. Fluids 5, 103701 (2020)

Convective dissolution of carbon dioxide in deep saline aquifers: Insights from engineering a high-pressure porous Hele-Shaw cell

Authors: Saeed Mahmoodpour, Behzad Rostami, Mohamad Reza Soltanian, Mohammad Amin Amooie

Abstract: We present the first experiments of dissolution-driven convection of carbon dioxide (CO$_2$) in a confined brine-saturated porous medium at high pressures. We designed a novel Hele-Shaw cell that allows for both visual and quantitative analyses, and address the effects of free-phase CO$_2$ and brine composition on convective dissolution. The visual examination of the gas volume combined with the m… ▽ More We present the first experiments of dissolution-driven convection of carbon dioxide (CO$_2$) in a confined brine-saturated porous medium at high pressures. We designed a novel Hele-Shaw cell that allows for both visual and quantitative analyses, and address the effects of free-phase CO$_2$ and brine composition on convective dissolution. The visual examination of the gas volume combined with the measurement of pressure, which both evolve with dissolution, enable us to yield insights into the dynamics of convection in conditions that more closely reflect the geologic conditions. We find and analyze different dissolution events, including diffusive, early and late convection, and shut-down regimes. Our experiments reveal that in intermediate regime, a so-called `quasi-steady' state actually never happens. Dissolution flux continuously decreases in this regime, which is due to a negative feedback loop: the rapid reduction of pressure following convective dissolution, in turn, decreases the solubility of CO$_2$ at the gas-brine interface and thus the instability strength. We introduce a new scaling factor that not only compensates the flux reduction but also the nonlinearities that arise from different salt types. We present robust scaling relations for the compensated flux and for the transition times between consecutive regimes in systems with NaCl (Ra $\sim$ 3271--4841) and NaCl+CaCl$_2$ mixtures (Ra $\sim$ 2919--4283). We also find that NaCl+CaCl$_2$ mixtures enjoy a longer intermediate period before the shut-down of dissolution, but with a lower dissolution flux, as compared to NaCl brines... △ Less

Submitted 20 December, 2018; originally announced December 2018.

Journal ref: Phys. Rev. Applied 12, 034016 (2019)

Solutal convection in porous media: Comparison between boundary conditions of constant concentration and constant flux

Authors: Mohammad Amin Amooie, Mohamad Reza Soltanian, Joachim Moortgat

Abstract: We numerically examine solutal convection in porous media, driven by the dissolution of carbon dioxide (CO2) into water---an effective mechanism for CO2 storage in saline aquifers. Dissolution is associated with slow diffusion of free-phase CO2 into the underlying aqueous phase followed by density-driven convective mixing of CO2 throughout the water-saturated layer. We study the fluid dynamics of… ▽ More We numerically examine solutal convection in porous media, driven by the dissolution of carbon dioxide (CO2) into water---an effective mechanism for CO2 storage in saline aquifers. Dissolution is associated with slow diffusion of free-phase CO2 into the underlying aqueous phase followed by density-driven convective mixing of CO2 throughout the water-saturated layer. We study the fluid dynamics of CO2 convection in the single aqueous-phase region. A comparison is made between two different boundary conditions in the top of the formation: (i) a constant, maximum aqueous-phase concentration of CO2, and (ii) a constant, low injection-rate of CO2, such that all CO2 dissolves instantly and the system remains in single phase. The latter model is found to involve a nonlinear evolution of CO2 composition and associated aqueous-phase density, which depend on the formation permeability. We model the full nonlinear phase behavior of water-CO2 mixtures in a confined domain, consider dissolution and fluid compressibility, and relax the common Boussinesq approximation. We discover new flow regimes and present quantitative scaling relations for global characteristics of spreading, mixing, and a dissolution flux in two- and three-dimensional media for both boundary conditions. We also revisit the scaling behavior of Sherwood number (Sh) with Rayleigh number (Ra), which has been under debate for porous-media convection. Our measurements from the solutal convection in the range 1, 500<Ra<135, 000 show that the classical linear scaling Sh ~ Ra is attained asymptotically for the constant-concentration case. Similarly linear scaling is recovered for the constant-flux model problem. △ Less

Submitted 6 September, 2018; originally announced September 2018.

Implicit Finite Volume and Discontinuous Galerkin Methods for Multicomponent Flow in Unstructured 3D Fractured Porous Media

Authors: Joachim Moortgat, Mohammad Amin Amooie, Mohamad Reza Soltanian

Abstract: We present a new implicit higher-order finite element (FE) approach to efficiently model compressible multicomponent fluid flow on unstructured grids and in fractured porous subsurface formations. The scheme is sequential implicit: pressures and fluxes are updated with an implicit Mixed Hybrid Finite Element (MHFE) method, and the transport of each species is approximated with an implicit second-o… ▽ More We present a new implicit higher-order finite element (FE) approach to efficiently model compressible multicomponent fluid flow on unstructured grids and in fractured porous subsurface formations. The scheme is sequential implicit: pressures and fluxes are updated with an implicit Mixed Hybrid Finite Element (MHFE) method, and the transport of each species is approximated with an implicit second-order Discontinuous Galerkin (DG) FE method. Discrete fractures are incorporated with a cross-flow equilibrium approach. This is the first investigation of all-implicit higher-order MHFE-DG for unstructured triangular, quadrilateral (2D), and hexahedral (3D) grids and discrete fractures. A lowest-order implicit finite volume (FV) transport update is also developed for the same grid types. The implicit methods are compared to an Implicit-Pressure-Explicit-Composition (IMPEC) scheme. For fractured domains, the unconditionally stable implicit transport update is shown to increase computational efficiency by orders of magnitude as compared to IMPEC, which has a time-step constraint proportional to the pore volume of discrete fracture grid cells. However, when lowest-order Euler time-discretizations are used, numerical errors increase linearly with the larger implicit time-steps, resulting in high numerical dispersion. Second-order Crank-Nicolson implicit MHFE-DG and MHFE-FV are therefore presented as well. Convergence analyses show twice the convergence rate for the DG methods as compared to FV, resulting in two to three orders of magnitude higher computational efficiency. Numerical experiments demonstrate the efficiency and robustness in modeling compressible multicomponent flow on irregular and fractured 2D and 3D grids, even in the presence of fingering instabilities. △ Less

Submitted 24 August, 2016; originally announced August 2016.

Comments: 24 pages, 3 tables, 10 figures