-
Similarities in Massive Separation Across Reynolds Numbers for Swept and Tapered Finite Span Wings
Authors:
Jacob Neal,
Anton Burtsev,
Jean Helder Marques Ribeiro,
Kunihiko Taira,
Vassilios Theofilis,
Michael Amitay
Abstract:
Experimental investigations were performed to elucidate the features of flow fields occurring over cantilevered finite-aspect ratio NACA 0015 wings at high angles of attack with various sweep angles and taper ratios. Volumetric Stereoscopic Particle Image Velocimetry experiments were performed at mean chord based Reynolds number of 247,500 in a wind tunnel and 600 in a water tunnel. Direct Numeric…
▽ More
Experimental investigations were performed to elucidate the features of flow fields occurring over cantilevered finite-aspect ratio NACA 0015 wings at high angles of attack with various sweep angles and taper ratios. Volumetric Stereoscopic Particle Image Velocimetry experiments were performed at mean chord based Reynolds number of 247,500 in a wind tunnel and 600 in a water tunnel. Direct Numerical Simulations (DNS) of the water tunnel test section, including the cantilevered model, were also performed at the lower Reynolds number. The low Reynolds number experiments, low Reynolds number simulations, and high Reynolds number experiments all showed that swee** the leading edge back shifted the largest portion of the reversed flow towards the wingtip while swee** the trailing edge forward shifted the reversed flow towards the wing root. A detailed parametric sweep of planform geometry systematically varied the leading and trailing edge sweep angles and taper ratios of the finite wings. It was found that the large scale vortical structures resulting from varying these parameters at the two Reynolds numbers share surprisingly many three-dimensional topological features, despite the orders of magnitude different Reynolds numbers.
△ Less
Submitted 23 August, 2023;
originally announced August 2023.
-
Laminar post-stall wakes of tapered swept wings
Authors:
Jean Hélder Marques Ribeiro,
Jacob Neal,
Anton Burtsev,
Michael Amitay,
Vassilios Theofilis,
Kunihiko Taira
Abstract:
While tapered swept wings are widely used, the influence of taper on their post-stall wake characteristics remains largely unexplored. To address this issue, we conduct an extensive study using direct numerical simulations to characterize the wing taper and sweep effects on laminar separated wakes. We analyze flows behind NACA 0015 cross-sectional profile wings at post-stall angles of attack…
▽ More
While tapered swept wings are widely used, the influence of taper on their post-stall wake characteristics remains largely unexplored. To address this issue, we conduct an extensive study using direct numerical simulations to characterize the wing taper and sweep effects on laminar separated wakes. We analyze flows behind NACA 0015 cross-sectional profile wings at post-stall angles of attack $α=14^\circ$--$22^\circ$ with taper ratios $λ=0.27$--$1$, leading edge sweep angles $0^\circ$--$50^\circ$, and semi aspect ratios $sAR =1$ and $2$ at a mean-chord-based Reynolds number of $600$. Tapered wings have smaller tip chord length, which generates a weaker tip vortex, and attenuates inboard downwash. This results in the development of unsteadiness over a large portion of the wingspan at high angles of attack. For tapered wings with backward-swept leading edges unsteadiness emerges near the wing tip. On the other hand, wings with forward-swept trailing edges are shown to concentrate wake shedding structures near the wing root. For highly swept untapered wings, the wake is steady, while unsteady shedding vortices appear near the tip for tapered wings with high leading edge sweep angles. For such wings, larger wake oscillations emerge near the root as the taper ratio decreases. While the combination of taper and sweep increases flow unsteadiness, we find that tapered swept wings have more enhanced aerodynamic performance than untapered and unswept wings, exhibiting higher time-averaged lift and lift-to-drag ratio. The current findings shed light on the fundamental aspects of flow separation over tapered wings in the absence of turbulent flow effects.
△ Less
Submitted 19 October, 2023; v1 submitted 15 April, 2023;
originally announced April 2023.
-
Linear modal instabilities around post-stall swept finite-aspect ratio wings at low Reynolds numbers
Authors:
Anton Burtsev,
Wei He,
Shelby Hayostek,
Kai Zhang,
Vassilios Theofilis,
Kunihiko Taira,
Michael Amitay
Abstract:
Linear modal instabilities of flow over finite-span untapered wings have been investigated numerically at Reynolds number 400, at a range of angles of attack and sweep on two wings having aspect ratios 4 and 8. Base flows have been generated by direct numerical simulation, marching the unsteady incompressible three-dimensional Navier-Stokes equations to a steady state, or using selective frequency…
▽ More
Linear modal instabilities of flow over finite-span untapered wings have been investigated numerically at Reynolds number 400, at a range of angles of attack and sweep on two wings having aspect ratios 4 and 8. Base flows have been generated by direct numerical simulation, marching the unsteady incompressible three-dimensional Navier-Stokes equations to a steady state, or using selective frequency dam** to obtain stationary linearly unstable flows. Unstable three-dimensional linear global modes of swept wings have been identified for the first time using spectral-element time-step** solvers. The effect of the wing geometry and flow parameters on these modes has been examined in detail. An increase of the angle of attack was found to destabilize the flow, while an increase of the sweep angle had the opposite effect. On unswept wings, TriGlobal analysis revealed that the most unstable global mode peaks in the midspan region of the wake; the peak of the mode structure moves towards the tip as sweep is increased. Data-driven analysis was then employed to study the effects of wing geometry and flow conditions on the nonlinear wake. On unswept wings, the dominant mode at low angles of attack is a Kelvin-Helmholtz-like instability, qualitatively analogous with global modes of infinite-span wings under same conditions. At higher angles of attack and moderate sweep angles, the dominant mode is a structure denominated the interaction mode. At high sweep angles, this mode evolves into elongated streamwise vortices on higher aspect ratio wings, while on shorter wings it becomes indistinguishable from tip-vortex instability.
△ Less
Submitted 8 February, 2021;
originally announced February 2021.
-
Laminar separated flows over finite-aspect-ratio swept wings
Authors:
Kai Zhang,
Shelby Hayostek,
Michael Amitay,
Anton Burtsev,
Vassilios Theofilis,
Kunihiko Taira
Abstract:
We perform direct numerical simulations of laminar separated flows over finite-aspect-ratio swept wings at a chord-base Reynolds number of $Re = 400$ to reveal a variety of wake structures generated for a range of aspect ratios ($sAR=0.5-4$), angles of attack ($α=16^{\circ}-30^{\circ}$), and sweep angles ($Λ=0^{\circ}-45^{\circ}$). Flows behind swept wings exhibit increased complexity in their dyn…
▽ More
We perform direct numerical simulations of laminar separated flows over finite-aspect-ratio swept wings at a chord-base Reynolds number of $Re = 400$ to reveal a variety of wake structures generated for a range of aspect ratios ($sAR=0.5-4$), angles of attack ($α=16^{\circ}-30^{\circ}$), and sweep angles ($Λ=0^{\circ}-45^{\circ}$). Flows behind swept wings exhibit increased complexity in their dynamical features compared to unswept-wing wakes. For unswept wings, the wake dynamics are predominantly influenced by the tip effects. Steady wakes are mainly limited to low-aspect-ratio wings. Unsteady vortex shedding takes place near the midspan of higher-$AR$ wings due to weakened downwash induced by the tip vortices. With increasing sweep angle, the source of three dimensionality transitions from the tip to the midspan. A pair of symmetric vortical structures forms along the two sides of the midspan, imposing downward velocity upon each other in a manner similar to the downwash induced by tip vortices. Such stabilizing midspan effects not only expand the steady wake region to higher aspect ratios, but also enhance lift. At higher aspect ratios, the midspan effects of swept wings diminish at outboard region, allowing unsteady vortex shedding to develop near the tip. In the wakes of highly swept wings, streamwise finger-like structures form repetitively along the wing span, providing a stabilizing effect. The insights revealed from this study can aid the design of high-lift devices and serve as a step** stone for understanding the complex wake dynamics at higher Reynolds numbers and those generated by unsteady wing maneuvers.
△ Less
Submitted 19 May, 2020;
originally announced May 2020.
-
On the formation of three-dimensional flows over finite-aspect-ratio wings under tip effects
Authors:
Kai Zhang,
Shelby Hayostek,
Michael Amitay,
Wei He,
Vassilios Theofilis,
Kunihiko Taira
Abstract:
We perform DNS of flow over finite-aspect-ratio NACA 0015 wings to characterize the tip effects on the wake dynamics. This study focuses on the development of three-dimensional separated flow over the wing, and discuss flow structures formed on the wing surface as well as in the far field wake. Vorticity is introduced into the flow in a predominantly two-dimensional manner. The vortex sheet from t…
▽ More
We perform DNS of flow over finite-aspect-ratio NACA 0015 wings to characterize the tip effects on the wake dynamics. This study focuses on the development of three-dimensional separated flow over the wing, and discuss flow structures formed on the wing surface as well as in the far field wake. Vorticity is introduced into the flow in a predominantly two-dimensional manner. The vortex sheet from the wing tip rolls up around the free end to form the tip vortex. At its inception, the tip vortex is weak and its effect is spatially confined. As the flow around the tip separates, the tip effects extend farther in the spanwise direction, generating noticeable three dimensionality in the wake. For low-aspect-ratio wings, the wake remains stable due to the strong downwash over the entire span. Increasing the aspect ratio allows unsteady vortical flow to emerge away from the tip at sufficiently high angles of attack. These unsteady vortices shed and form closed vortical loops. For higher-aspect-ratio wings, the tip effects retard the near-tip shedding process, which desynchronizes from the two-dimensional shedding over the mid-span region, yielding vortex dislocation. At high angles of attack, the tip vortex exhibits noticeable undulations due to the strong interaction with the unsteady shedding vortices. The spanwise distribution of force coefficients is related to the three-dimensional wake dynamics and the tip effects. Vortical elements in the wake that are responsible for the generation of lift and drag forces are identified through the force element analysis. We note that at high angles of attack, a stationary vortical structure forms at the leading edge near the tip, giving rise to locally high lift and drag forces. The analysis performed here reveals how the vortical flow around the tip influences the separation physics, the global wake dynamics, and the spanwise force distributions.
△ Less
Submitted 10 September, 2019;
originally announced September 2019.
