-
Modeling and Control of Diesel Engine Emissions using Multi-layer Neural Networks and Economic Model Predictive Control
Authors:
Jiadi Zhang,
Xiao Li,
Mohammad Reza Amini,
Ilya Kolmanovsky,
Munechika Tsutsumi,
Hayato Nakada
Abstract:
This paper presents the results of develo** a multi-layer Neural Network (NN) to represent diesel engine emissions and integrating this NN into control design. Firstly, a NN is trained and validated to simultaneously predict oxides of nitrogen (N Ox) and Soot using both transient and steady-state data. Based on the input-output correlation analysis, inputs to NN with the highest influence on the…
▽ More
This paper presents the results of develo** a multi-layer Neural Network (NN) to represent diesel engine emissions and integrating this NN into control design. Firstly, a NN is trained and validated to simultaneously predict oxides of nitrogen (N Ox) and Soot using both transient and steady-state data. Based on the input-output correlation analysis, inputs to NN with the highest influence on the emissions are selected while kee** the NN structure simple. Secondly, a co-simulation framework is implemented to integrate the NN emissions model with a model of a diesel engine airpath system built in GT-Power and used to identify a low-order linear parameter-varying (LPV) model for emissions prediction. Finally, an economic supervisory model predictive controller (MPC) is developed using the LPV emissions model to adjust setpoints to an inner-loop airpath tracking MPC. Simulation results are reported illustrating the capability of the resulting controller to reduce N Ox, meet the target Soot limit, and track the adjusted intake manifold pressure and exhaust gas recirculation (EGR) rate targets.
△ Less
Submitted 6 November, 2023;
originally announced November 2023.
-
Robust Model Predictive Control for Enhanced Fast Charging on Electric Vehicles through Integrated Power and Thermal Management
Authors:
Qiuhao Hu,
Mohammad Reza Amini,
Ashley Wiese,
Ilya Kolmanovsky,
**g Sun
Abstract:
This paper explores the synergies between integrated power and thermal management (iPTM) and battery charging in an electric vehicle (EV). A multi-objective model predictive control (MPC) framework is developed to optimize the fast charging performance while enforcing the constraints in the power and thermal loops. The approach takes into account the coupling of the battery and cabin thermal manag…
▽ More
This paper explores the synergies between integrated power and thermal management (iPTM) and battery charging in an electric vehicle (EV). A multi-objective model predictive control (MPC) framework is developed to optimize the fast charging performance while enforcing the constraints in the power and thermal loops. The approach takes into account the coupling of the battery and cabin thermal management. The case study of a commercial EV demonstrates that the proposed method can effectively meet the requirements of fast charging and thermal management when accurate preview information is available. However, failure to predict the charging event can result in performance degradation with longer charging time. A time-varying weighting strategy is proposed to enhance charging performance in the presence of uncertainty. This strategy leverages the battery state-of-charge (SOC) and adjusts the priority of the multi-objective MPC at different phases during charging. Simulated results using a commercial EV use case show improved robustness in charging time using the proposed strategy.
△ Less
Submitted 20 October, 2023;
originally announced October 2023.
-
Control Co-design of a Hydrokinetic Turbine: A Comparative Study of Open-loop Optimal Control and Feedback Control
Authors:
Mohammad Reza Amini,
Boxi Jiang,
Yingqian Liao,
Kartik Naik,
Joaquim R. R. A. Martins,
**g Sun
Abstract:
Control co-design (CCD) explores physical and control design spaces simultaneously to optimize a system's performance. A commonly used CCD framework aims to achieve open-loop optimal control (OLOC) trajectory while optimizing the physical design variables subject to constraints on control and design parameters. In this study, in contrast with the conventional CCD methods based on OLOC schemes, we…
▽ More
Control co-design (CCD) explores physical and control design spaces simultaneously to optimize a system's performance. A commonly used CCD framework aims to achieve open-loop optimal control (OLOC) trajectory while optimizing the physical design variables subject to constraints on control and design parameters. In this study, in contrast with the conventional CCD methods based on OLOC schemes, we present a CCD formulation that explicitly considers a feedback controller. In the formulation, we consider two control laws based on proportional linear and quadratic state feedback, where the control gain is optimized. The simulation results show that the OLOC trajectory could be approximated by a feedback controller. While the total energy generated from the CCD with a feedback controller is slightly lower than that of the CCD with OLOC, it results in a much simpler control structure and more robust performance in the presence of uncertainties and disturbances, making it suitable for real-time control. The study in this paper investigates the performance of optimal hydrokinetic turbine design with a feedback controller in the presence of uncertainties and disturbances to demonstrate the benefits and highlight challenges associated with incorporating the feedback controller explicitly in the CCD stage.
△ Less
Submitted 6 February, 2023;
originally announced February 2023.
-
Benefits of Feedforward for Model Predictive Airpath Control of Diesel Engines
Authors:
Jiadi Zhang,
Mohammad Reza Amini,
Ilya Kolmanovsky,
Munechika Tsutsumi,
Hayato Nakada
Abstract:
This paper investigates options to complement a diesel engine airpath feedback controller with a feedforward. The control objective is to track the intake manifold pressure and exhaust gas recirculation (EGR) rate targets by manipulating the EGR valve and variable geometry turbine (VGT) while satisfying state and input constraints. The feedback controller is based on rate-based Model Predictive Co…
▽ More
This paper investigates options to complement a diesel engine airpath feedback controller with a feedforward. The control objective is to track the intake manifold pressure and exhaust gas recirculation (EGR) rate targets by manipulating the EGR valve and variable geometry turbine (VGT) while satisfying state and input constraints. The feedback controller is based on rate-based Model Predictive Control (MPC) that provides integral action for tracking. Two options for the feedforward are considered one based on a look-up table that specifies the feedforward as a function of engine speed and fuel injection rate, and another one based on a (non-rate-based) MPC that generates dynamic feedforward trajectories. The controllers are designed and verified using a high-fidelity engine model in GT-Power and exploit a low-order rate-based linear parameter-varying (LPV) model for prediction which is identified from transient response data generated by the GT-Power model. It is shown that the combination of feedforward and feedback MPC has the potential to improve the performance and robustness of the control design. In particular, the feedback MPC without feedforward can lose stability at low engine speeds, while MPC-based feedforward results in the best transient response. Mechanisms by which feedforward is able to assist in stabilization and improve performance are discussed.
△ Less
Submitted 11 May, 2022;
originally announced May 2022.
-
Control Co-design of a Hydrokinetic Turbine with Open-loop Optimal Control
Authors:
Boxi Jiang,
Mohammad Reza Amini,
Yingqian Liao,
Joaquim R. R. A. Martins,
**g Sun
Abstract:
This paper introduces a control co-design (CCD) framework to simultaneously explore the physical parameters and control spaces for a hydro-kinetic turbine (HKT) rotor optimization. The optimization formulation incorporates a coupled dynamic-hydrodynamic model to maximize the rotor power efficiency for various time-variant flow profiles. The open-loop optimal control is applied for maximum power tr…
▽ More
This paper introduces a control co-design (CCD) framework to simultaneously explore the physical parameters and control spaces for a hydro-kinetic turbine (HKT) rotor optimization. The optimization formulation incorporates a coupled dynamic-hydrodynamic model to maximize the rotor power efficiency for various time-variant flow profiles. The open-loop optimal control is applied for maximum power tracking, and the blade element momentum theory (BEMT) is used to model the hydrodynamics. Case studies with different control constraints are investigated for CCD. Sensitivity analyses were conducted with respect to different flow profiles and initial geometries. Comparisons are made between CCD and the sequential process, with physical design followed by a control design process under the same conditions. The results demonstrate the benefits of CCD and reveal that, with control constraints, CCD leads to increased energy production compared to the design obtained from the sequential design process.
△ Less
Submitted 3 April, 2022;
originally announced April 2022.
-
Development of a Model Predictive Airpath Controller for a Diesel Engine on a High-Fidelity Engine Model with Transient Thermal Dynamics
Authors:
Jiadi Zhang,
Mohammad Reza Amini,
Ilya Kolmanovsky,
Munechika Tsutsumi,
Hayato Nakada
Abstract:
This paper presents the results of a model predictive controller (MPC) development for diesel engine air-path regulation. The control objective is to track the intake manifold pressure and exhaust gas recirculation (EGR) rate targets by manipulating the EGR valve and variable geometry turbine (VGT) while satisfying state and control constraints. The MPC controller is designed and verified using a…
▽ More
This paper presents the results of a model predictive controller (MPC) development for diesel engine air-path regulation. The control objective is to track the intake manifold pressure and exhaust gas recirculation (EGR) rate targets by manipulating the EGR valve and variable geometry turbine (VGT) while satisfying state and control constraints. The MPC controller is designed and verified using a high-fidelity engine model in GT-Power. The controller exploits a low-order rate-based linear parameter-varying (LPV) model for prediction which is identified from transient response data generated by the GT-Power model. It is shown that transient engine thermal dynamics influence the airpath dynamics, specifically the intake manifold pressure response, however, MPC demonstrates robustness against inaccuracies in modeling these thermal dynamics. In particular, we show that MPC can be successfully implemented using a rate-based prediction model with two inputs (EGR and VGT positions) identified from data with steady-state wall temperature dynamics, however, closed-loop performance can be improved if a prediction model (i) is identified from data with transient thermal dynamics, and (ii) has the fuel injection rate as extra model input. Further, the MPC calibration process across the engine operating range to achieve improved performance is addressed. As the MPC calibration is shown to be sensitive to the operating conditions, a fast calibration process is proposed.
△ Less
Submitted 25 February, 2022;
originally announced February 2022.
-
Experimental Validation of Eco-Driving and Eco-Heating Strategies for Connected and Automated HEVs
Authors:
Mohammad Reza Amini,
Qiuhao Hu,
Hao Wang,
Yiheng Feng,
Ilya Kolmanovsky,
**g Sun
Abstract:
This paper presents experimental results that validate eco-driving and eco-heating strategies developed for connected and automated vehicles (CAVs). By exploiting vehicle-to-infrastructure (V2I) communications, traffic signal timing, and queue length estimations, optimized and smoothed speed profiles for the ego-vehicle are generated to reduce energy consumption. Next, the planned eco-trajectories…
▽ More
This paper presents experimental results that validate eco-driving and eco-heating strategies developed for connected and automated vehicles (CAVs). By exploiting vehicle-to-infrastructure (V2I) communications, traffic signal timing, and queue length estimations, optimized and smoothed speed profiles for the ego-vehicle are generated to reduce energy consumption. Next, the planned eco-trajectories are incorporated into a real-time predictive optimization framework that coordinates the cabin thermal load (in cold weather) with the speed preview, i.e., eco-heating. To enable eco-heating, the engine coolant (as the only heat source for cabin heating) and the cabin air are leveraged as two thermal energy storages. Our eco-heating strategy stores thermal energy in the engine coolant and cabin air while the vehicle is driving at high speeds, and releases the stored energy slowly during the vehicle stops for cabin heating without forcing the engine to idle to provide the heating source. To test and validate these solutions, a power-split hybrid electric vehicle (HEV) has been instrumented for cabin thermal management, allowing to regulate heating, ventilation, and air conditioning (HVAC) system inputs (cabin temperature setpoint and blower flow rate) in real-time. Experiments were conducted to demonstrate the energy-saving benefits of eco-driving and eco-heating strategies over real-world city driving cycles at different cold ambient temperatures. The data confirmed average fuel savings of 14.5% and 4.7% achieved by eco-driving and eco-heating, respectively, offering a combined energy saving of more than 19% when comparing to the baseline vehicle driven by a human driver with a constant-heating strategy.
△ Less
Submitted 2 February, 2021; v1 submitted 14 January, 2021;
originally announced January 2021.
-
Engine and Aftertreatment Co-Optimization of Connected HEVs via Multi-Range Vehicle Speed Planning and Prediction
Authors:
Qiuhao Hu,
Mohammad Reza Amini,
Yiheng Feng,
Zhen Yang,
Hao Wang,
Ilya Kolmanovsky,
**g Sun,
Ashley Wiese,
Zeng Qiu,
Julia Buckland Seeds
Abstract:
Connected vehicles (CVs) have situational awareness that can be exploited for control and optimization of the powertrain system. While extensive studies have been carried out for energy efficiency improvement of CVs via eco-driving and planning, the implication of such technologies on the thermal responses of CVs has not been fully investigated. One of the key challenges in leveraging connectivity…
▽ More
Connected vehicles (CVs) have situational awareness that can be exploited for control and optimization of the powertrain system. While extensive studies have been carried out for energy efficiency improvement of CVs via eco-driving and planning, the implication of such technologies on the thermal responses of CVs has not been fully investigated. One of the key challenges in leveraging connectivity for optimization-based thermal management of CVs is the relatively slow thermal dynamics, which necessitate the use of a long prediction horizon to achieve the best performance. Long-term prediction of the CV speed, unlike the V2V/V2I-based short-range prediction, is difficult and error-prone. The multiple timescales inherent to power and thermal systems call for a variable timescale optimization framework with access to short- and long-term vehicle speed preview. To this end, a model predictive controller (MPC) with a multi-range speed preview for integrated power and thermal management (iPTM) of connected hybrid electric vehicles (HEVs) is presented in this paper. The MPC is formulated to manage the power-split between the engine and the battery while enforcing the power and thermal (engine coolant and catalytic converter temperatures) constraints. The MPC exploits prediction and optimization over a shorter receding horizon and longer shrinking horizon. Over the longer shrinking horizon, the vehicle speed estimation is based on the data collected from the connected vehicles traveling on the same route as the ego-vehicle. Simulation results of applying the MPC over real-world urban driving cycles in Ann Arbor, MI are presented to demonstrate the effectiveness and fuel-saving potentials of the proposed iPTM strategy under the uncertainty associated with long-term predictions of the CV's speed.
△ Less
Submitted 20 March, 2020;
originally announced March 2020.
-
Integrated Power and Thermal Management of Connected HEVs via Multi-Horizon MPC
Authors:
Qiuhao Hu,
Mohammad Reza Amini,
Hao Wang,
Ilya Kolmanovsky,
**g Sun
Abstract:
In this paper, a multi-horizon model predictive controller (MH-MPC) is developed for integrated power and thermal management (iPTM) of a power-split hybrid electric vehicle (HEV). The proposed MH-MPC leverages an accurate short-horizon vehicle speed preview and an approximate forecast over a longer shrinking horizon till the end of the driving cycle. This multiple-horizon scheme is developed to co…
▽ More
In this paper, a multi-horizon model predictive controller (MH-MPC) is developed for integrated power and thermal management (iPTM) of a power-split hybrid electric vehicle (HEV). The proposed MH-MPC leverages an accurate short-horizon vehicle speed preview and an approximate forecast over a longer shrinking horizon till the end of the driving cycle. This multiple-horizon scheme is developed to cope with fast and slow dynamics associated with power and thermal responses. The main objective of the proposed MH-MPC is to minimize fuel consumption and enforce the power and thermal constraints on the battery state-of-charge and engine coolant temperature, while meeting the driving (traction) and cabin air conditioning (heating) demands. The proposed MH-MPC allows for exploiting the engine coolant as thermal energy storage, providing more flexibility for the HEV energy flow optimization. The simulation results show that the proposed MH-MPC provides near-optimal results in reference to the Dynamic Programming (DP) solution with an affordable computational cost. Moreover, compared with a more conventional MPC strategy, the MH-MPC can leverage the speed previews with different resolutions effectively to achieve the desired performance with satisfactory robustness.
△ Less
Submitted 19 March, 2020;
originally announced March 2020.
-
Combined Energy and Comfort Optimization of Air Conditioning System in Connected and Automated Vehicles
Authors:
Hao Wang,
Mohammad Reza Amini,
Ziyou Song,
**g Sun,
Ilya Kolmanovsky
Abstract:
In this paper, we propose a combined energy and comfort optimization (CECO) strategy for the air conditioning (A/C) system of the connected and automated vehicles (CAVs). By leveraging the weather and traffic predictions enabled by the emerging CAV technologies, the proposed strategy is able to minimize the A/C system energy consumption while maintaining the occupant thermal comfort (OTC) within t…
▽ More
In this paper, we propose a combined energy and comfort optimization (CECO) strategy for the air conditioning (A/C) system of the connected and automated vehicles (CAVs). By leveraging the weather and traffic predictions enabled by the emerging CAV technologies, the proposed strategy is able to minimize the A/C system energy consumption while maintaining the occupant thermal comfort (OTC) within the comfort constraints, where the comfort is quantified by a modified predictive mean vote (PMV) model adapted for an automotive application. A general CECO problem is formulated and addressed using model predictive control (MPC) and weather/traffic previews. Depending on the ways of exploiting the preview information and enforcing the OTC constraint, different MPCs are developed based on solving different variations of the general CECO problem. The CECO-based MPCs are then tested in simulation using an automotive A/C system simulation model (CoolSim) as the virtual testbed. The simulation results show that, over SC03 driving cycle, the proposed CECO-based MPCs outperform the baseline cabin temperature tracking controller, reducing the A/C system energy consumption by up to 7.6%, while achieving better OTC according to the PMV-based metrics. This energy saving in A/C system translates to 3.1% vehicle fuel economy improvement. The trade-off between energy efficiency and OTC for different control scenarios is also highlighted.
△ Less
Submitted 26 September, 2019;
originally announced September 2019.
-
Robust Hierarchical MPC for Handling Long Horizon Demand Forecast Uncertainty with Application to Automotive Thermal Management
Authors:
Mohammad Reza Amini,
Ilya Kolmanovsky,
**g Sun
Abstract:
This paper presents a robust hierarchical MPC (H-MPC) for dynamic systems with slow states subject to demand forecast uncertainty. The H-MPC has two layers: (i) the scheduling MPC at the upper layer with a relatively long prediction/planning horizon and slow update rate, and (ii) the piloting MPC at the lower layer over a shorter prediction horizon with a faster update rate. The scheduling layer M…
▽ More
This paper presents a robust hierarchical MPC (H-MPC) for dynamic systems with slow states subject to demand forecast uncertainty. The H-MPC has two layers: (i) the scheduling MPC at the upper layer with a relatively long prediction/planning horizon and slow update rate, and (ii) the piloting MPC at the lower layer over a shorter prediction horizon with a faster update rate. The scheduling layer MPC calculates the optimal slow states, which will be tracked by the piloting MPC, while enforcing the system constraints according to a long-range and approximate prediction of the future demand/load, e.g., traction power demand for driving a vehicle. In this paper, to enhance the H-MPC robustness against the long-term demand forecast uncertainty, we propose to use the high-quality preview information enabled by the connectivity technology over the short horizon to modify the planned trajectories via a constraint tightening approach at the scheduling layer. Simulation results are presented for a simplified vehicle model to confirm the effectiveness of the proposed robust H-MPC framework in handling demand forecast uncertainty.
△ Less
Submitted 12 September, 2019;
originally announced September 2019.
-
Energy Management for Autonomous Underwater Vehicles Using Economic Model Predictive Control
Authors:
Niankai Yang,
Dongsik Chang,
Mohammad Reza Amini,
Matthew Johnson-Roberson,
**g Sun
Abstract:
This paper investigates the problem of energy-optimal control for autonomous underwater vehicles (AUVs). To improve the endurance of AUVs, we propose a novel energy-optimal control scheme based on the economic model predictive control (MPC) framework. We first formulate a cost function that computes the energy spent for vehicle operation over a finite-time prediction horizon. Then, to account for…
▽ More
This paper investigates the problem of energy-optimal control for autonomous underwater vehicles (AUVs). To improve the endurance of AUVs, we propose a novel energy-optimal control scheme based on the economic model predictive control (MPC) framework. We first formulate a cost function that computes the energy spent for vehicle operation over a finite-time prediction horizon. Then, to account for the energy consumption beyond the prediction horizon, a terminal cost that approximates the energy to reach the goal (energy-to-go) is incorporated into the MPC cost function.
△ Less
Submitted 20 June, 2019;
originally announced June 2019.
-
MPC-Based Precision Cooling Strategy (PCS) for Efficient Thermal Management of Automotive Air Conditioning System
Authors:
Hao Wang,
Yan Meng,
Quansheng Zhang,
Mohammad Reza Amini,
Ilya V. Kolmanovsky,
**g Sun,
Mark Jennings
Abstract:
In this paper, we propose an MPC-based precision cooling strategy (PCS) for energy efficient thermal management of automotive air conditioning (A/C) system. The proposed PCS is able to provide precise tracking of the time-varying cooling power trajectory, which is assumed to match the passenger comfort requirements. In addition, by leveraging the emerging connected and automated vehicles (CAVs) te…
▽ More
In this paper, we propose an MPC-based precision cooling strategy (PCS) for energy efficient thermal management of automotive air conditioning (A/C) system. The proposed PCS is able to provide precise tracking of the time-varying cooling power trajectory, which is assumed to match the passenger comfort requirements. In addition, by leveraging the emerging connected and automated vehicles (CAVs) technology, vehicle speed preview can be incorporated in our A/C thermal management strategy for further energy efficiency improvement. This proposed A/C thermal management strategy is developed and evaluated based on a physics-based A/C system model (ACSim) from Ford Motor Company for the vehicles with electrified powertrains. In a comparison with Ford benchmark case over SC03 cycle, for tracking the same cooling power trajectory, the proposed PCS provides 4.9% energy saving at the cost of a slight increase in the cabin temperature (less than 1$^oC$). It is also demonstrated that by coordinating with future vehicle speed and shifting the A/C power load, the A/C energy consumption can be further reduced.
△ Less
Submitted 10 June, 2019;
originally announced June 2019.
-
Integrated Optimization of Power Split, Engine Thermal Management, and Cabin Heating for Hybrid Electric Vehicles
Authors:
Xun Gong,
Hao Wang,
Mohammad Reza Amini,
Ilya Kolmanovsky,
**g Sun
Abstract:
Cabin heating demand and engine efficiency degradation in cold weather lead to considerable increase in fuel consumption of hybrid electric vehicles (HEVs), especially in congested traffic conditions. This paper presents an integrated power and thermal management (i-PTM) scheme for the optimization of power split, engine thermal management, and cabin heating of HEVs. A control-oriented model of a…
▽ More
Cabin heating demand and engine efficiency degradation in cold weather lead to considerable increase in fuel consumption of hybrid electric vehicles (HEVs), especially in congested traffic conditions. This paper presents an integrated power and thermal management (i-PTM) scheme for the optimization of power split, engine thermal management, and cabin heating of HEVs. A control-oriented model of a power split HEV, including power and thermal loops, is developed and experimentally validated against data collected from a 2017 Toyota Prius HEV. Based on this model, the dynamic programming (DP) technique is adopted to derive a bench-mark for minimal fuel consumption, using 2-dimensional (power split and engine thermal management) and 3-dimensional (power split, engine thermal management, and cabin heating) formulations. Simulation results for a real-world congested driving cycle show that the engine thermal effect and the cabin heating requirement can significantly influence the optimal behavior for the power management, and substantial potential on fuel saving can be achieved by the i-PTM optimization as compared to conventional power and thermal management strategies.
△ Less
Submitted 3 June, 2019;
originally announced June 2019.
-
Thermal Responses of Connected HEVs Engine and Aftertreatment Systems to Eco-Driving
Authors:
Mohammad Reza Amini,
Yiheng Feng,
Hao Wang,
Ilya V. Kolmanovsky,
**g Sun
Abstract:
Connected and automated vehicles (CAVs) have been recognized as providing unprecedented opportunities for substantial fuel economy improvement through CAV-based vehicle speed trajectory optimization (eco-driving). At the same time, the implications of the CAV operation on thermal responses, including those of engine and exhaust aftertreatment system, have not been fully investigated. To this end,…
▽ More
Connected and automated vehicles (CAVs) have been recognized as providing unprecedented opportunities for substantial fuel economy improvement through CAV-based vehicle speed trajectory optimization (eco-driving). At the same time, the implications of the CAV operation on thermal responses, including those of engine and exhaust aftertreatment system, have not been fully investigated. To this end, firstly, a sequential optimization framework for vehicle speed trajectory planning and powertrain control in hybrid electric CAVs is proposed in this paper. Next, the impact of eco-driving and power split optimization on the engine and catalytic converter thermal responses, as well as on the tailpipe emissions is characterized. Despite an average 16% improvement in fuel economy through sequential optimization, this study shows that eco-driving slows down the thermal responses, which could unfavorably affect the tailpipe emissions.
△ Less
Submitted 30 May, 2019; v1 submitted 30 May, 2019;
originally announced May 2019.
-
Sequential Optimization of Speed, Thermal Load, and Power Split in Connected HEVs
Authors:
Mohammad Reza Amini,
Xun Gong,
Yiheng Feng,
Hao Wang,
Ilya Kolmanovsky,
**g Sun
Abstract:
The emergence of connected and automated vehicles (CAVs) provides an unprecedented opportunity to capitalize on these technologies well beyond their original designed intents. While abundant evidence has been accumulated showing substantial fuel economy improvement benefits achieved through advanced powertrain control, the implications of the CAV operation on power and thermal management have not…
▽ More
The emergence of connected and automated vehicles (CAVs) provides an unprecedented opportunity to capitalize on these technologies well beyond their original designed intents. While abundant evidence has been accumulated showing substantial fuel economy improvement benefits achieved through advanced powertrain control, the implications of the CAV operation on power and thermal management have not been fully investigated. In this paper, in order to explore the opportunities for the coordination between the onboard thermal management and the power split control, we present a sequential optimization solution for eco-driving speed trajectory planning, air conditioning (A/C) thermal load planning (eco-cooling), and powertrain control in hybrid electric CAVs to evaluate the individual as well as the collective energy savings through proactive usage of traffic data for vehicle speed prediction. Simulation results over a real-world driving cycle show that compared to a baseline non-CAV, 11.9%, 14.2%, and 18.8% energy savings can be accumulated sequentially through speed, thermal load, and power split optimizations, respectively.
△ Less
Submitted 20 March, 2019;
originally announced March 2019.
-
Two-Layer Model Predictive Battery Thermal and Energy Management Optimization for Connected and Automated Electric Vehicles
Authors:
Mohammad Reza Amini,
**g Sun,
Ilya Kolmanovsky
Abstract:
Future vehicles are expected to be able to exploit increasingly the connected driving environment for efficient, comfortable, and safe driving. Given relatively slow dynamics associated with the state of charge and temperature response in electrified vehicles with large batteries, a long prediction/planning horizon is needed to achieve improved energy efficiency benefits. In this paper, we develop…
▽ More
Future vehicles are expected to be able to exploit increasingly the connected driving environment for efficient, comfortable, and safe driving. Given relatively slow dynamics associated with the state of charge and temperature response in electrified vehicles with large batteries, a long prediction/planning horizon is needed to achieve improved energy efficiency benefits. In this paper, we develop a two-layer Model Predictive Control (MPC) strategy for battery thermal and energy management of electric vehicle (EV), aiming at improving fuel economy through real-time prediction and optimization. In the first layer, the long-term traffic flow information and an approximate model reflective of the relatively slow battery temperature dynamics are leveraged to minimize energy consumption required for battery cooling while maintaining the battery temperature within the desired operating range. In the second layer, the scheduled battery thermal and state of charge (SOC) trajectories planned to achieve long-term battery energy-optimal thermal behavior are used as the reference over a short horizon to regulate the battery temperature. Additionally, an intelligent online constraint handling (IOCH) algorithm is developed to compensate for the mismatch between the actual and predicted driving conditions and reduce the chance for battery temperature constraint violation. The simulation results show that, depending on the driving cycle, the proposed two-layer MPC is able to save 2.8-7.9% of the battery energy compared to the traditional rule-based controller in connected and automated vehicle (CAV) operation scenario. Moreover, as compared to a single layer MPC with a long horizon, the two-layer structure of the proposed MPC solution reduces significantly the computing effort without compromising the performance.
△ Less
Submitted 26 September, 2018;
originally announced September 2018.
-
Real-Time Model Predictive Control for Energy Management in Autonomous Underwater Vehicle
Authors:
Niankai Yang,
Mohammad Reza Amini,
Matthew Johnson-Roberson,
**g Sun
Abstract:
Improving endurance is crucial for extending the spatial and temporal operation range of autonomous underwater vehicles (AUVs). Considering the hardware constraints and the performance requirements, an intelligent energy management system is required to extend the operation range of AUVs. This paper presents a novel model predictive control (MPC) framework for energy-optimal point-to-point motion…
▽ More
Improving endurance is crucial for extending the spatial and temporal operation range of autonomous underwater vehicles (AUVs). Considering the hardware constraints and the performance requirements, an intelligent energy management system is required to extend the operation range of AUVs. This paper presents a novel model predictive control (MPC) framework for energy-optimal point-to-point motion control of an AUV. In this scheme, the energy management problem of an AUV is reformulated as a surge motion optimization problem in two stages. First, a system-level energy minimization problem is solved by managing the trade-off between the energies required for overcoming the positive buoyancy and surge drag force in static optimization. Next, an MPC with a special cost function formulation is proposed to deal with transients and system dynamics. A switching logic for handling the transition between the static and dynamic stages is incorporated to reduce the computational efforts. Simulation results show that the proposed method is able to achieve near-optimal energy consumption with considerable lower computational complexity.
△ Less
Submitted 26 September, 2018; v1 submitted 13 September, 2018;
originally announced September 2018.
-
Adaptive Discrete Second Order Sliding Mode Control with Application to Nonlinear Automotive Systems
Authors:
Mohammad Reza Amini,
Mahdi Shahbakhti,
Selina Pan
Abstract:
Sliding mode control (SMC) is a robust and computationally efficient model-based controller design technique for highly nonlinear systems, in the presence of model and external uncertainties. However, the implementation of the conventional continuous-time SMC on digital computers is limited, due to the imprecisions caused by data sampling and quantization, and the chattering phenomena, which resul…
▽ More
Sliding mode control (SMC) is a robust and computationally efficient model-based controller design technique for highly nonlinear systems, in the presence of model and external uncertainties. However, the implementation of the conventional continuous-time SMC on digital computers is limited, due to the imprecisions caused by data sampling and quantization, and the chattering phenomena, which results in high frequency oscillations. One effective solution to minimize the effects of data sampling and quantization imprecisions is the use of higher order sliding modes. To this end, in this paper, a new formulation of an adaptive second order discrete sliding mode control (DSMC) is presented for a general class of multi-input multi-output (MIMO) uncertain nonlinear systems. Based on a Lyapunov stability argument and by invoking the new Invariance Principle, not only the asymptotic stability of the controller is guaranteed, but also the adaptation law is derived to remove the uncertainties within the nonlinear plant dynamics. The proposed adaptive tracking controller is designed and tested in real-time for a highly nonlinear control problem in spark ignition combustion engine during transient operating conditions. The simulation and real-time processor-in-the-loop (PIL) test results show that the second order single-input single-output (SISO) DSMC can improve the tracking performances up to 90%, compared to a first order SISO DSMC under sampling and quantization imprecisions, in the presence of modeling uncertainties. Moreover, it is observed that by converting the engine SISO controllers to a MIMO structure, the overall controller performance can be enhanced by 25%, compared to the SISO second order DSMC, because of the dynamics coupling consideration within the MIMO DSMC formulation.
△ Less
Submitted 17 May, 2018;
originally announced May 2018.
-
Model Predictive Climate Control of Connected and Automated Vehicles for Improved Energy Efficiency
Authors:
Hao Wang,
Ilya Kolmanovsky,
Mohammad Reza Amini,
**g Sun
Abstract:
This paper considers an application of model predictive control to automotive air conditioning (A/C) system in future connected and automated vehicles (CAVs) with battery electric or hybrid electric powertrains. A control-oriented prediction model for A/C system is proposed, identified, and validated against a higher fidelity simulation model (CoolSim). Based on the developed prediction model, a n…
▽ More
This paper considers an application of model predictive control to automotive air conditioning (A/C) system in future connected and automated vehicles (CAVs) with battery electric or hybrid electric powertrains. A control-oriented prediction model for A/C system is proposed, identified, and validated against a higher fidelity simulation model (CoolSim). Based on the developed prediction model, a nonlinear model predictive control (NMPC) problem is formulated and solved online to minimize the energy consumption of the A/C system. Simulation results illustrate the desirable characteristics of the proposed NMPC solution such as being able to enforce physical constraints of the A/C system and maintain cabin temperature within a specified range. Moreover, it is shown that by utilizing the vehicle speed preview and through coordinated adjustment of the cabin temperature constraints, energy efficiency improvements of up to 9% can be achieved.
△ Less
Submitted 1 March, 2018;
originally announced March 2018.
-
Predictive Second Order Sliding Control of Constrained Linear Systems with Application to Automotive Control Systems
Authors:
Mohammad Reza Amini,
Mahdi Shahbakhti,
**g Sun
Abstract:
This paper presents a new predictive second order sliding controller (PSSC) formulation for setpoint tracking of constrained linear systems. The PSSC scheme is developed by combining the concepts of model predictive control (MPC) and second order discrete sliding mode control. In order to guarantee the feasibility of the PSSC during setpoint changes, a virtual reference variable is added to the PS…
▽ More
This paper presents a new predictive second order sliding controller (PSSC) formulation for setpoint tracking of constrained linear systems. The PSSC scheme is developed by combining the concepts of model predictive control (MPC) and second order discrete sliding mode control. In order to guarantee the feasibility of the PSSC during setpoint changes, a virtual reference variable is added to the PSSC cost function to calculate the closest admissible set point. The states of the system are then driven asymptotically to this admissible setpoint by the control action of the PSSC. The performance of the proposed PSSC is evaluated for an advanced automotive engine case study, where a high fidelity physics-based model of a reactivity controlled compression ignition (RCCI) engine is utilized to serve as the virtual test-bed for the simulations. Considering the hard physical constraints on the RCCI engine states and control inputs, simultaneous tracking of engine load and optimal combustion phasing is a challenging objective to achieve. The simulation results of testing the proposed PSSC on the high fidelity RCCI model show that the developed predictive controller is able to track desired engine load and combustion phasing setpoints, with minimum steady state error, and no overshoot. Moreover, the simulation results confirm the robust tracking performance of the PSSC during transient operations, in the presence of engine cyclic variability.
△ Less
Submitted 5 February, 2018;
originally announced February 2018.
-
Design of an SI Engine Cold Start Controller based on Dynamic Coupling Analysis
Authors:
Mohammad Reza Amini,
Mahdi Shahbakhti
Abstract:
In this paper, the dynamic couplings among different inputs and outputs of a highly nonlinear spark ignition (SI) engine control problem during the cold start phase are evaluated by using relative gain array (RGA) technique. First, based on the experimental data, a multi-input multi-output model is developed to represent the engine dynamics. Second, the coupling among different inputs and outputs…
▽ More
In this paper, the dynamic couplings among different inputs and outputs of a highly nonlinear spark ignition (SI) engine control problem during the cold start phase are evaluated by using relative gain array (RGA) technique. First, based on the experimental data, a multi-input multi-output model is developed to represent the engine dynamics. Second, the coupling among different inputs and outputs of the model is evaluated by using RGA technique in both open-loop and closed-loop structures. The results show that although there is an internal coupling within the engine dynamics in the open-loop framework, the closed-loop engine controller can be designed using a decentralized structure without significantly affecting the system performance. In the next step, based on a nonlinear physics-based model of the engine, a set of single-input single-output (SISO) adaptive second order discrete sliding mode controllers (DSMC) are designed to drive the states of the engine model to their pre-defined desired trajectories and minimize the tailpipe HC emission, under modelling and implementation (data sampling and quantization) uncertainties. The real-time test results on an actual engine control unit (ECU) show that the proposed SISO adaptive second order DSMC provides accurate and fast tracking performance for the highly nonlinear and internally coupled engine dynamics, and can meet the HC emission limit by controlling the engine-out emissions and exhaust catalytic converter efficiency.
△ Less
Submitted 9 October, 2017;
originally announced October 2017.
-
MIMO First and Second Order Discrete Sliding Mode Controls of Uncertain Linear Systems under Implementation Imprecisions
Authors:
Mohammad Reza Amini,
Mahdi Shahbakhti,
Selina Pan
Abstract:
The performance of a conventional model-based controller significantly depends on the accuracy of the modeled dynamics. The model of a plant's dynamics is subjected to errors in estimating the numerical values of the physical parameters, and variations over operating environment conditions and time. These errors and variations in the parameters of a model are the major sources of uncertainty withi…
▽ More
The performance of a conventional model-based controller significantly depends on the accuracy of the modeled dynamics. The model of a plant's dynamics is subjected to errors in estimating the numerical values of the physical parameters, and variations over operating environment conditions and time. These errors and variations in the parameters of a model are the major sources of uncertainty within the controller structure. Digital implementation of controller software on an actual electronic control unit (ECU) introduces another layer of uncertainty at the controller inputs/outputs. The implementation uncertainties are mostly due to data sampling and quantization via the analog-to-digital conversion (ADC) unit. The failure to address the model and ADC uncertainties during the early stages of a controller design cycle results in a costly and time consuming verification and validation (V&V) process. In this paper, new formulations of the first and second order discrete sliding mode controllers (DSMC) are presented for a general class of uncertain linear systems. The knowledge of the ADC imprecisions is incorporated into the proposed DSMCs via an online ADC uncertainty prediction mechanism to improve the controller robustness characteristics. Moreover, the DSMCs are equipped with adaptation laws to remove two different types of modeling uncertainties (multiplicative and additive) from the parameters of the linear system model. The proposed adaptive DSMCs are evaluated on a DC motor speed control problem in real-time using a processor-in-the-loop (PIL) setup with an actual ECU. The results show that the proposed SISO and MIMO second order DSMCs improve the conventional SISO first order DSMC tracking performance by 69% and 84%, respectively. Moreover, the proposed adaptation mechanism is able to remove the uncertainties in the model by up to 90%.
△ Less
Submitted 13 June, 2017;
originally announced June 2017.
-
Handling Model and Implementation Uncertainties via an Adaptive Discrete Sliding Mode Controller Design
Authors:
Mohammad Reza Amini,
Mahdi Shahbakhti,
Selina Pan,
J. Karl Hedrick
Abstract:
Analog-to-digital conversion (ADC) and uncertainties in modeling the plant dynamics are the main sources of imprecisions in the design cycle of model-based controllers. These implementation and model uncertainties should be addressed in the early stages of the controller design, otherwise they could lead to failure in the controller performance and consequently increase the time and cost required…
▽ More
Analog-to-digital conversion (ADC) and uncertainties in modeling the plant dynamics are the main sources of imprecisions in the design cycle of model-based controllers. These implementation and model uncertainties should be addressed in the early stages of the controller design, otherwise they could lead to failure in the controller performance and consequently increase the time and cost required for completing the controller verification and validation (V&V) with more iterative loops. In this paper, a new control approach is developed based on a nonlinear discrete sliding mode controller (DSMC) formulation to mitigate the ADC imprecisions and model uncertainties. To this end, a DSMC design is developed against implementation imprecisions by incorporating the knowledge of ADC uncertainties on control inputs via an online uncertainty prediction and propagation mechanism. Next, a generic online adaptive law will be derived to compensate for the impact of an unknown parameter in the controller equations that is assumed to represent the model uncertainty. The final proposed controller is an integrated adaptive DSMC with robustness to implementation and model uncertainties that includes (i) an online ADC uncertainty mechanism, and (ii) an online adaptation law. The proposed adaptive control approach is evaluated on a nonlinear automotive engine control problem in real-time using a processor-in-the-loop (PIL) setup with an actual electronic control unit (ECU). The results reveal that the proposed adaptive control technique removes the uncertainty in the model fast, and significantly improves the robustness of the controllers to ADC imprecisions. This provides up to 60% improvement in the performance of the controller under implementation and model uncertainties compared to a baseline DSMC, in which there are no incorporated ADC imprecisions.
△ Less
Submitted 7 June, 2017;
originally announced June 2017.
-
Discrete Adaptive Second Order Sliding Mode Controller Design with Application to Automotive Control Systems with Model Uncertainties
Authors:
Mohammad Reza Amini,
Mahdi Shahbakhti,
Selina Pan,
J. Karl Hedrick
Abstract:
Sliding mode control (SMC) is a robust and computationally efficient solution for tracking control problems of highly nonlinear systems with a great deal of uncertainty. High frequency oscillations due to chattering phenomena and sensitivity to data sampling imprecisions limit the digital implementation of conventional first order continuous-time SMC. Higher order discrete SMC is an effective solu…
▽ More
Sliding mode control (SMC) is a robust and computationally efficient solution for tracking control problems of highly nonlinear systems with a great deal of uncertainty. High frequency oscillations due to chattering phenomena and sensitivity to data sampling imprecisions limit the digital implementation of conventional first order continuous-time SMC. Higher order discrete SMC is an effective solution to reduce the chattering during the controller software implementation, and also overcome imprecisions due to data sampling. In this paper, a new adaptive second order discrete sliding mode control (DSMC) formulation is presented to mitigate data sampling imprecisions and uncertainties within the modeled plant's dynamics. The adaptation mechanism is derived based on a Lyapunov stability argument which guarantees asymptotic stability of the closed-loop system. The proposed controller is designed and tested on a highly nonlinear combustion engine tracking control problem. The simulation test results show that the second order DSMC can improve the tracking performance up to 80% compared to a first order DSMC under sampling and model uncertainties.
△ Less
Submitted 6 June, 2017;
originally announced June 2017.
