Showing 1–15 of 15 results for author: Alves, M A

Rheological behaviour and flow dynamics of Vitreous Humour substitutes used in eye surgery during saccadic eye movements

Authors: Andreia F. Silva, Francisco Pimenta, Manuel A. Alves, Mónica S. N. Oliveira

Abstract: This work discusses the rheology of several vitreous humour (VH) substitutes used in eye surgery (perfluorocarbons and silicone oils) and their flow behaviour when subjected to saccadic eye movements. Shear rheology experiments revealed that all fluids tested exhibit a constant shear viscosity, while extensional rheological experiments showed that Siluron 2000 is the only fluid tested that exhibit… ▽ More This work discusses the rheology of several vitreous humour (VH) substitutes used in eye surgery (perfluorocarbons and silicone oils) and their flow behaviour when subjected to saccadic eye movements. Shear rheology experiments revealed that all fluids tested exhibit a constant shear viscosity, while extensional rheological experiments showed that Siluron 2000 is the only fluid tested that exhibits a measurable elasticity. To characterise the dynamics during saccadic eye movements, numerical simulations of all the VH substitutes under study were performed with the open source software OpenFOAM and compared with Vitreous Humour flow dynamics to assess their potential mechanical performance. Minor differences were found between the numerical results of a viscoelastic fluid reproducing the rheology of Siluron 2000 and a Newtonian model. Perfluorocarbon (PFLC) shows a distinct flow behaviour relative to Silicone Oils (SiO). None of the pharmacological fluids tested can adequately mimic the rheological and consequently the flow behaviour of VH gel phase (Silva et al., 2020). △ Less

Submitted 23 March, 2023; originally announced March 2023.

Comments: 16 figures

Extensional rheometry of mobile fluids. Part II: Comparison between the uniaxial, planar and biaxial extensional rheology of dilute polymer solutions using numerically-optimized stagnation point microfluidic devices

Authors: Simon J. Haward, Stylianos Varchanis, Gareth H. McKinley, Manuel A. Alves, Amy Q. Shen

Abstract: In Part I of this paper [Haward et al. submitted (2023)], we presented a new three-dimensional microfluidic device (the optimized uniaxial and biaxial extensional rheometer, OUBER) for generating near-homogeneous uniaxial and biaxial elongational flows. In this Part II of the paper, we employ the OUBER device to examine the uniaxial and biaxial extensional rheology of some model dilute polymer sol… ▽ More In Part I of this paper [Haward et al. submitted (2023)], we presented a new three-dimensional microfluidic device (the optimized uniaxial and biaxial extensional rheometer, OUBER) for generating near-homogeneous uniaxial and biaxial elongational flows. In this Part II of the paper, we employ the OUBER device to examine the uniaxial and biaxial extensional rheology of some model dilute polymer solutions. We also compare the results with measurements made under planar extension in the optimized-shape cross-slot extensional rheometer [or OSCER, Haward et al. Phys. Rev. Lett. (2012)]. In each case (uniaxial, planar and biaxial extension), we use micro-particle image velocimetry to measure the extension rate as a function of the imposed flow rate, and we measure the excess pressure drop across each device in order to estimate the tensile stress difference generated in the fluid. We present a new analysis, based on solving the macroscopic power balance for flow through each device, to refine the estimate of the tensile stress difference obtained from the measured pressure drop. Based on this analysis, we find that for our most dilute polymer sample, which is "ultradilute", the extensional viscosity is well described by the finitely extensible non-linear elastic dumbbell model. In this limit, the biaxial extensional viscosity at high Weissenberg numbers (Wi) is half that of the uniaxial and planar extensional viscosities. At higher polymer concentrations, the experimental measurements deviate from the model predictions, which is attributed to the onset of intermolecular interactions as polymers unravel in the extensional flows. Of practical significance (and fundamental interest), elastic instability occurs at a significantly lower Wi in uniaxial extensional flow than in either biaxial or planar extensional flow, limiting the utility of this flow type for extensional viscosity measurement. △ Less

Submitted 23 February, 2023; originally announced February 2023.

Extensional rheometry of mobile fluids. Part I: OUBER, an optimized uniaxial and biaxial extensional rheometer

Authors: Simon J. Haward, Francisco Pimenta, Stylianos Varchanis, Daniel W. Carlson, Kazumi Toda-Peters, Manuel A. Alves, Amy Q. Shen

Abstract: We present a numerical optimization of a "6-arm cross-slot" device, yielding several three-dimensional shapes of fluidic channels designed to impose close approximations to ideal uniaxial (or biaxial) stagnation point extensional flow under the constraints of having four inlets and two outlets (or two inlets and four outlets) and Newtonian cree** flow conditions. Of the various numerically-gener… ▽ More We present a numerical optimization of a "6-arm cross-slot" device, yielding several three-dimensional shapes of fluidic channels designed to impose close approximations to ideal uniaxial (or biaxial) stagnation point extensional flow under the constraints of having four inlets and two outlets (or two inlets and four outlets) and Newtonian cree** flow conditions. Of the various numerically-generated geometries, one is selected as being most suitable for fabrication at the microscale, and numerical simulations with the Oldroyd-B and Phan-Thien and Tanner models confirm that the optimal flow fields in the chosen geometry are observed for both constant viscosity and shear thinning viscoelastic fluids. Fabrication of the geometry, which we name the optimized uniaxial and biaxial extensional rheometer (OUBER), is achieved with high precision at the microscale by selective laser-induced etching of a fused-silica substrate. Employing a viscous Newtonian fluid with a refractive index matched to that of the optically transparent microfluidic device, we conduct microtomographic-particle image velocimetry in order to resolve the flow field at low Reynolds number (< 0.1) in a substantial volume around the stagnation point. The flow velocimetry confirms the accurate imposition of the desired and predicted flows, with pure extensional flow at an essentially uniform deformation rate being applied over a wide region around the stagnation point. In Part II of this paper [Haward et al., J. Rheol. submitted (2023)], pressure drop measurements in the OUBER geometry will be used to assess the uniaxial and biaxial extensional rheometry of dilute polymeric solutions, in comparison to measurements made in planar extension using an optimized-shape cross-slot extensional rheometer (OSCER, Haward et al, Phys. Rev. Lett., 2012). △ Less

Submitted 20 February, 2023; originally announced February 2023.

Vector In Memory Architecture for simple and high efficiency computing

Authors: Marco Antonio Zanata Alves, Sairo Santos, Aline S. Cordeiro, Francis B. Moreira, Paulo C. Santos, Luigi Carro

Abstract: Data movement is one of the main challenges of contemporary system architectures. Near-Data Processing (NDP) mitigates this issue by moving computation closer to the memory, avoiding excessive data movement. Our proposal, Vector-In-Memory Architecture(VIMA), executes large vector instructions near 3D-stacked memories using vector functional units and uses a small data cache to enable short-term da… ▽ More Data movement is one of the main challenges of contemporary system architectures. Near-Data Processing (NDP) mitigates this issue by moving computation closer to the memory, avoiding excessive data movement. Our proposal, Vector-In-Memory Architecture(VIMA), executes large vector instructions near 3D-stacked memories using vector functional units and uses a small data cache to enable short-term data reuse. It provides an easy programming interface and guarantees precise exceptions. When executing stream-behaved applications using a single core, VIMA offers a speedup of up to 26x over a CPU system baseline with vector operations in a single-core processor while spending 93% less energy. △ Less

Submitted 28 March, 2022; originally announced March 2022.

COVID-ABS: An Agent-Based Model of COVID-19 Epidemic to Simulate Health and Economic Effects of Social Distancing Interventions

Authors: Petrônio C. L. Silva, Paulo V. C. Batista, Hélder S. Lima, Marcos A. Alves, Frederico G. Guimarães, Rodrigo C. P. Silva

Abstract: The COVID-19 pandemic due to the SARS-CoV-2 coronavirus has directly impacted the public health and economy worldwide. To overcome this problem, countries have adopted different policies and non-pharmaceutical interventions for controlling the spread of the virus. This paper proposes the COVID-ABS, a new SEIR (Susceptible-Exposed-Infected-Recovered) agent-based model that aims to simulate the pand… ▽ More The COVID-19 pandemic due to the SARS-CoV-2 coronavirus has directly impacted the public health and economy worldwide. To overcome this problem, countries have adopted different policies and non-pharmaceutical interventions for controlling the spread of the virus. This paper proposes the COVID-ABS, a new SEIR (Susceptible-Exposed-Infected-Recovered) agent-based model that aims to simulate the pandemic dynamics using a society of agents emulating people, business and government. Seven different scenarios of social distancing interventions were analyzed, with varying epidemiological and economic effects: (1) do nothing, (2) lockdown, (3) conditional lockdown, (4) vertical isolation, (5) partial isolation, (6) use of face masks, and (7) use of face masks together with 50% of adhesion to social isolation. In the impossibility of implementing scenarios with lockdown, which present the lowest number of deaths and highest impact on the economy, scenarios combining the use of face masks and partial isolation can be the more realistic for implementation in terms of social cooperation. The COVID-ABS model was implemented in Python programming language, with source code publicly available. The model can be easily extended to other societies by changing the input parameters, as well as allowing the creation of a multitude of other scenarios. Therefore, it is a useful tool to assist politicians and health authorities to plan their actions against the COVID-19 epidemic. △ Less

Submitted 8 July, 2020; v1 submitted 8 June, 2020; originally announced June 2020.

Comments: 37 pages, 17 figures

Journal ref: Chaos, Solitons & Fractals (2020)

Conjugate heat transfer in the unbounded flow of a viscoelastic fluid past a sphere

Authors: F. Pimenta, M. A. Alves

Abstract: This work addresses the conjugate heat transfer of a simplified PTT fluid flowing past an unbounded sphere in the Stokes regime ($Re = 0.01$). The problem is numerically solved with the finite-volume method assuming axial symmetry, absence of natural convection and constant physical properties. The sphere generates heat at a constant and uniform rate, and the analysis is conducted for a range of D… ▽ More This work addresses the conjugate heat transfer of a simplified PTT fluid flowing past an unbounded sphere in the Stokes regime ($Re = 0.01$). The problem is numerically solved with the finite-volume method assuming axial symmetry, absence of natural convection and constant physical properties. The sphere generates heat at a constant and uniform rate, and the analysis is conducted for a range of Deborah ($0 \leq De \leq 100$), Prandtl ($10^0 \leq Pr \leq 10^5$), Brinkman ($0 \leq Br \leq 100$) and conductivity ratios ($0.1 \leq κ\leq 10$), in the presence or absence of thermal contact resistance at the solid-fluid interface. The drag coefficient shows a monotonic decrease with $De$, whereas the stresses on the sphere surface and in the wake first increase and then decrease with $De$. A negative wake was observed for the two solvent viscosity ratios tested ($β$ = 0.1 and 0.5), being more intense for the more elastic fluid. In the absence of viscous dissipation, the average Nusselt number starts to decrease with $De$ after an initial increase. Heat transfer enhancement relative to an equivalent Newtonian fluid was observed for the whole range of conditions tested. The temperature of the sphere decreases and becomes more homogeneous when its thermal conductivity increases in relation to the conductivity of the fluid, although small changes are observed in the Nusselt number. The thermal contact resistance at the interface increases the average temperature of the sphere, without affecting significantly the shape of the temperature profiles inside the sphere. When viscous dissipation is considered, significant changes are observed in the heat transfer process as $Br$ increases. Overall, a simplified PTT fluid can enhance heat transfer compared to a Newtonian fluid, but increasing $De$ does not necessarily improve heat exchange. △ Less

Submitted 12 April, 2021; v1 submitted 29 April, 2020; originally announced April 2020.

Journal ref: International Journal of Heat and Fluid Flow, Volume 89, June 2021, 108784

Forecasting in Non-stationary Environments with Fuzzy Time Series

Authors: Petrônio Cândido de Lima e Silva, Carlos Alberto Severiano Junior, Marcos Antonio Alves, Rodrigo Silva, Miri Weiss Cohen, Frederico Gadelha Guimarães

Abstract: In this paper we introduce a Non-Stationary Fuzzy Time Series (NSFTS) method with time varying parameters adapted from the distribution of the data. In this approach, we employ Non-Stationary Fuzzy Sets, in which perturbation functions are used to adapt the membership function parameters in the knowledge base in response to statistical changes in the time series. The proposed method is capable of… ▽ More In this paper we introduce a Non-Stationary Fuzzy Time Series (NSFTS) method with time varying parameters adapted from the distribution of the data. In this approach, we employ Non-Stationary Fuzzy Sets, in which perturbation functions are used to adapt the membership function parameters in the knowledge base in response to statistical changes in the time series. The proposed method is capable of dynamically adapting its fuzzy sets to reflect the changes in the stochastic process based on the residual errors, without the need to retraining the model. This method can handle non-stationary and heteroskedastic data as well as scenarios with concept-drift. The proposed approach allows the model to be trained only once and remain useful long after while kee** reasonable accuracy. The flexibility of the method by means of computational experiments was tested with eight synthetic non-stationary time series data with several kinds of concept drifts, four real market indices (Dow Jones, NASDAQ, SP500 and TAIEX), three real FOREX pairs (EUR-USD, EUR-GBP, GBP-USD), and two real cryptocoins exchange rates (Bitcoin-USD and Ethereum-USD). As competitor models the Time Variant fuzzy time series and the Incremental Ensemble were used, these are two of the major approaches for handling non-stationary data sets. Non-parametric tests are employed to check the significance of the results. The proposed method shows resilience to concept drift, by adapting parameters of the model, while preserving the symbolic structure of the knowledge base. △ Less

Submitted 26 April, 2020; originally announced April 2020.

Comments: 21 pages, 7 figures, submitted to Applied Soft Computing

Scalable and Customizable Benchmark Problems for Many-Objective Optimization

Authors: Ivan Reinaldo Meneghini, Marcos Antonio Alves, António Gaspar-Cunha, Frederico Gadelha Guimarães

Abstract: Solving many-objective problems (MaOPs) is still a significant challenge in the multi-objective optimization (MOO) field. One way to measure algorithm performance is through the use of benchmark functions (also called test functions or test suites), which are artificial problems with a well-defined mathematical formulation, known solutions and a variety of features and difficulties. In this paper… ▽ More Solving many-objective problems (MaOPs) is still a significant challenge in the multi-objective optimization (MOO) field. One way to measure algorithm performance is through the use of benchmark functions (also called test functions or test suites), which are artificial problems with a well-defined mathematical formulation, known solutions and a variety of features and difficulties. In this paper we propose a parameterized generator of scalable and customizable benchmark problems for MaOPs. It is able to generate problems that reproduce features present in other benchmarks and also problems with some new features. We propose here the concept of generative benchmarking, in which one can generate an infinite number of MOO problems, by varying parameters that control specific features that the problem should have: scalability in the number of variables and objectives, bias, deceptiveness, multimodality, robust and non-robust solutions, shape of the Pareto front, and constraints. The proposed Generalized Position-Distance (GPD) tunable benchmark generator uses the position-distance paradigm, a basic approach to building test functions, used in other benchmarks such as Deb, Thiele, Laumanns and Zitzler (DTLZ), Walking Fish Group (WFG) and others. It includes scalable problems in any number of variables and objectives and it presents Pareto fronts with different characteristics. The resulting functions are easy to understand and visualize, easy to implement, fast to compute and their Pareto optimal solutions are known. △ Less

Submitted 11 February, 2020; v1 submitted 26 January, 2020; originally announced January 2020.

Comments: 24 pages, 23 figures, to be published in Applied Soft computing

Journal ref: Applied Soft Computing, Volume 90, 2020, 106139

A coupled finite-volume solver for numerical simulation of electrically-driven flows

Authors: Francisco Pimenta, Manuel A. Alves

Abstract: The accuracy and stability of implicit CFD codes are frequently impaired by the decoupling between variables, which can ultimately lead to numerical divergence. Coupled solvers, which solve all the governing equations simultaneously, have the potential to fix this problem. In this work, we report the implementation of coupled solvers for transient and steady-state electrically-driven flow simulati… ▽ More The accuracy and stability of implicit CFD codes are frequently impaired by the decoupling between variables, which can ultimately lead to numerical divergence. Coupled solvers, which solve all the governing equations simultaneously, have the potential to fix this problem. In this work, we report the implementation of coupled solvers for transient and steady-state electrically-driven flow simulations in the finite-volumes framework. The numerical method, developed in OpenFOAM, is generic for Newtonian and viscoelastic fluids and is formulated for the Poisson-Nernst-Planck and Poisson-Boltzmann models. The resulting coupled systems of equations are solved efficiently with PETSc library. The performance of the coupled solvers is assessed in two test cases: induced-charge electroosmosis of a Newtonian fluid around a cylinder; electroosmotic flow of a PTT viscoelastic fluid in a contraction/expansion microchannel. The coupled solvers are more accurate in transient simulations and allow the use of larger time-steps without numerical divergence. For steady-state simulations, the coupled solvers converge in fewer iterations than segregated solvers. Although coupled solvers are much slower in a per time-step basis, the overall speedup factor obtained in this study reached a maximum value of ~100, where the highest factors have been obtained with semi-coupled solvers, which drop some coupling terms between equations. While further research is needed to improve the efficiency of the matrix solving stage, coupled solvers are already superior to segregated solvers in a number of cases. △ Less

Submitted 21 September, 2019; v1 submitted 26 March, 2019; originally announced April 2019.

Journal ref: Computers and Fluids 193 (2019) 104279

Secondary flows of viscoelastic fluids in serpentine microchannels

Authors: Lucie Ducloue, Laura Casanellas, Simon J. Haward, Robert J. Poole, Manuel A. Alves, Sandra Lerouge, Amy Q. Shen, Anke Lindner

Abstract: Secondary flows are ubiquitous in channel flows, where small velocity components perpendicular to the main velocity appear due to the complexity of the channel geometry and/or that of the flow itself such as from inertial or non-Newtonian effects, etc. We investigate here the inertialess secondary flow of viscoelastic fluids in curved microchannels of rectangular cross-section and constant but alt… ▽ More Secondary flows are ubiquitous in channel flows, where small velocity components perpendicular to the main velocity appear due to the complexity of the channel geometry and/or that of the flow itself such as from inertial or non-Newtonian effects, etc. We investigate here the inertialess secondary flow of viscoelastic fluids in curved microchannels of rectangular cross-section and constant but alternating curvature: the so-called "serpentine channel" geometry. Numerical calculations (Poole et al, 2013) have shown that in this geometry, in the absence of elastic instabilities, a steady secondary flow develops that takes the shape of two counter-rotating vortices in the plane of the channel cross-section. We present the first experimental visualization evidence and characterization of these steady secondary flows, using a complementarity of microPIV in the plane of the channel, and confocal visualisation of dye-stream transport in the cross-sectional plane. We show that the measured streamlines and the relative velocity magnitude of the secondary flows are in qualitative agreement with the numerical results. In addition to our techniques being broadly applicable to the characterisation of three-dimensional flow structures in microchannels, our results are important for understanding the onset of instability in serpentine viscoelastic flows. △ Less

Submitted 12 February, 2019; v1 submitted 29 October, 2018; originally announced October 2018.

Comments: This is a post-peer-review, pre-copyedit version of an article published in Microfluidics and Nanofluidics. The final authenticated version is available online at: http://dx.doi.org/10.1007/s10404-019-2195-0

Journal ref: Ducloué, L., Casanellas, L., Haward, S.J. et al. Microfluid Nanofluid (2019) 23: 33

Numerical simulation of electrically-driven flows using OpenFOAM

Authors: Francisco Pimenta, Manuel A. Alves

Abstract: In this work, we study the implementation of electrically-driven flow (EDF) models in the finite-volume framework of $\text{OpenFOAM}^\circledR$. The Poisson-Nernst-Planck model is used for the transport of charged species and it is coupled to the Navier-Stokes equations, governing the fluid flow. In addition, the Poisson-Boltzmann and Debye-Hückel models are also implemented. The discretization m… ▽ More In this work, we study the implementation of electrically-driven flow (EDF) models in the finite-volume framework of $\text{OpenFOAM}^\circledR$. The Poisson-Nernst-Planck model is used for the transport of charged species and it is coupled to the Navier-Stokes equations, governing the fluid flow. In addition, the Poisson-Boltzmann and Debye-Hückel models are also implemented. The discretization method and the boundary conditions are carefully handled in order to ensure conservativeness of ionic species in generic meshes and second-order accuracy in space and time. The applicability of the developed solver is illustrated in two relevant EDFs: induced-charge electroosmosis around a conducting cylinder and charge transport across an ion-selective membrane. The solver developed in the present work, freely available as open-source, can be a valuable and versatile tool in the investigation of generic electrically-driven flows. △ Less

Submitted 4 September, 2018; v1 submitted 8 February, 2018; originally announced February 2018.

Lid-driven cavity flow of viscoelastic liquids

Authors: R. G. Sousa, R. J. Poole, A. M. Afonso, F. T. Pinho, P. J. Oliveira, A. Morozov, M. A. Alves

Abstract: The lid-driven cavity flow is a well-known benchmark problem for the validation of new numerical methods and techniques. In experimental and numerical studies with viscoelastic fluids in such lid-driven flows, purely-elastic instabilities have been shown to appear even at very low Reynolds numbers. A finite-volume viscoelastic code, using the log-conformation formulation, is used in this work to p… ▽ More The lid-driven cavity flow is a well-known benchmark problem for the validation of new numerical methods and techniques. In experimental and numerical studies with viscoelastic fluids in such lid-driven flows, purely-elastic instabilities have been shown to appear even at very low Reynolds numbers. A finite-volume viscoelastic code, using the log-conformation formulation, is used in this work to probe the effect of viscoelasticity on the appearance of such instabilities in two-dimensional lid-driven cavities for a wide range of aspect ratios (0.125 < height/length < 4.0), at different Deborah numbers under cree**-flow conditions and to understand the effects of regularization of the lid velocity. The effect of the viscoelasticity on the steady-state results and on the critical conditions for the onset of the elastic instabilities are described and compared to experimental results. △ Less

Submitted 7 March, 2016; originally announced March 2016.

Enhanced Microfluidic Mixing via a Tricritical Spiral Vortex Instability

Authors: Simon J. Haward, Robert J. Poole, Manuel A. Alves, Paulo J. Oliveira, Nigel Goldenfeld, Amy Q. Shen

Abstract: Experimental measurements and numerical simulations are made on fluid flow through cross-slot devices with a range of aspect (depth:width) ratios, 0.4 < alpha < 3.87. For low Reynolds numbers Re, the flow is symmetric and a sharp boundary exists between fluid streams entering the cross-slot from opposite directions. Above an alpha-dependent critical value Re_c, the flow undergoes a symmetry-breaki… ▽ More Experimental measurements and numerical simulations are made on fluid flow through cross-slot devices with a range of aspect (depth:width) ratios, 0.4 < alpha < 3.87. For low Reynolds numbers Re, the flow is symmetric and a sharp boundary exists between fluid streams entering the cross-slot from opposite directions. Above an alpha-dependent critical value Re_c, the flow undergoes a symmetry-breaking bifurcation (though remains steady and laminar) and a spiral vortex structure develops about the central axis of the outflow channel. An order parameter characterizing the instability grows according to a sixth-order Landau potential, and shows a progression from second order to first order transitions as alpha increases. A tricritical point occurs for alpha ~ 0.55. The spiral vortex acts as a mixing region in the flow field and this phenomenon can be used to drive enhanced mixing in microfluidic devices. △ Less

Submitted 3 September, 2015; originally announced September 2015.

Journal ref: Phys. Rev. E 93, 031101 (2016)

Serpentine channels: micro -- rheometers for fluid relaxation times

Authors: Josephine Zilz, Christof Schäfer, Christian Wagner, Robert J. Poole, Manuel A. Alves, Anke Lindner

Abstract: We propose a novel device capable of measuring the relaxation time of viscoelastic fluids as small as 1\,ms. In contrast to most rheometers, which by their very nature are concerned with producing viscometric or nearly-viscometric flows, here we make use of an elastic instability which occurs in the flow of viscoelastic fluids with curved streamlines. To calibrate the rheometer we combine simple s… ▽ More We propose a novel device capable of measuring the relaxation time of viscoelastic fluids as small as 1\,ms. In contrast to most rheometers, which by their very nature are concerned with producing viscometric or nearly-viscometric flows, here we make use of an elastic instability which occurs in the flow of viscoelastic fluids with curved streamlines. To calibrate the rheometer we combine simple scaling arguments with relaxation times obtained from first normal-stress difference data measured in a classical shear rheometer. As an additional check we also compare these relaxation times to those obtained from Zimm theory and good agreement is observed. Once calibrated, we show how the serpentine rheometer can be used to access smaller polymer concentrations and lower solvent viscosities where classical measurements become difficult or impossible to use due to inertial and/or resolution limitations. In the absence of calibration the serpentine channel can still be a very useful comparative or index device. △ Less

Submitted 6 October, 2013; originally announced October 2013.

Comments: accepted for for publication in Lab on a chip

Geometric scaling of purely-elastic flow instabilities

Authors: J. Zilz, R. J. Poole, M. A. Alves, D. Bartolo, B. Levache, A. Lindner

Abstract: We present a combined experimental, numerical and theoretical investigation of the geometric scaling of the onset of a purely-elastic flow instability in a serpentine channel. Good qualitative agreement is obtained between experiments, using dilute solutions of flexible polymers in microfluidic devices, and two-dimensional numerical simulations using the UCM model. The results are confirmed by a s… ▽ More We present a combined experimental, numerical and theoretical investigation of the geometric scaling of the onset of a purely-elastic flow instability in a serpentine channel. Good qualitative agreement is obtained between experiments, using dilute solutions of flexible polymers in microfluidic devices, and two-dimensional numerical simulations using the UCM model. The results are confirmed by a simple theoretical analysis, based on the dimensionless criterion proposed by Pakdel-McKinley for onset of a purely-elastic instability. △ Less

Submitted 23 September, 2011; originally announced September 2011.