-
Radioisotopes production using lasers: from basic science to applications
Authors:
M. R. D. Rodrigues,
A. Bonasera,
M. Scisciò,
J. A. Pérez-Hernández,
M. Ehret,
F. Filippi,
P. L. Andreoli,
M. Huault,
H. Larreur,
D. Singappuli,
D. Molloy,
D. Raffestin,
M. Alonzo,
G. G. Rapisarda,
D. Lattuada,
G. L. Guardo,
C. Verona,
Fe. Consoli,
G. Petringa,
A. McNamee,
M. La Cognata,
S. Palmerini,
T. Carriere,
M. Cipriani,
G. Di Giorgio
, et al. (15 additional authors not shown)
Abstract:
Laser technologies improved after the understanding of the Chirped Pulse Amplification (CPA) which allows energetic laser beams to be compressed to tens of femtosecond (fs) pulse durations and focused to few $μ$m. Protons of tens of MeV can be accelerated using for instance the Target Normal Sheath Acceleration (TNSA) method and focused on secondary targets. In such conditions, nuclear reactions c…
▽ More
Laser technologies improved after the understanding of the Chirped Pulse Amplification (CPA) which allows energetic laser beams to be compressed to tens of femtosecond (fs) pulse durations and focused to few $μ$m. Protons of tens of MeV can be accelerated using for instance the Target Normal Sheath Acceleration (TNSA) method and focused on secondary targets. In such conditions, nuclear reactions can occur and radioisotopes relevant for medical purposes be produced. High repetition lasers can be used to produce enough isotopes for medical applications. This route is competitive to conventional methods mostly based on accelerators. In this paper we study the production of $^{67}$Cu, $^{63}$Zn, $^{18}$F and $^{11}$C currently used in positron emission tomography (PET) and other applications. At the same time, we study the reaction $^{10}$B(p,$α$)$^{7}$Be and $^{70}$Zn(p,4n)$^{67}$Ga to put further constraints to the proton distributions at different angles and to the reaction $^{11}$B(p,$α$)$^{8}$Be relevant for energy production. The experiment was performed at the 1 petawatt (PW) laser facility at Vega III located in Salamanca-Spain. Angular distributions of radioisotopes in the forward (with respect to the laser direction) and backward directions were measured using a High Purity Germanium Detector (HPGE). Our results are reasonably reproduced by the numerical estimates following the approach of Kimura et al. (NIMA637(2011)167)
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
Monofiber optical probe using Doppler signals detection for Drop Size and Velocity measurement in air assisted atomization
Authors:
Mathieu Alonzo,
Anthony Lefebvre,
Zhujun Huang,
Stéphane Gluck,
Alain Cartellier
Abstract:
Reliable measurement of droplet/bubble size and velocity distributions in dense flows is desired in a variety of research fields, both for laboratory and industrial use. A new type of single-mode monofiber optical probe manufactured by A2 Photonic Sensors is introduced in this paper: it combines traditional phase detection with the collection of a Doppler signal returned by an incoming gas-liquid…
▽ More
Reliable measurement of droplet/bubble size and velocity distributions in dense flows is desired in a variety of research fields, both for laboratory and industrial use. A new type of single-mode monofiber optical probe manufactured by A2 Photonic Sensors is introduced in this paper: it combines traditional phase detection with the collection of a Doppler signal returned by an incoming gas-liquid interface to provide information on residence times, drop concentration and velocity, which afford then drop chords and liquid flux measurements. Compared with classical optical probes, that new sensor does not require any calibration. The purpose of the present work is to test this technique in assisted atomization in order to provide a mean for spray characterization and ultimately to improve our understanding of atomization mechanisms. The probe has been tested downstream of a coaxial air-assisted atomizer operated at liquid velocity =. to. / , and gas velocity from = to about /. We first analyzed raw signals in various flow conditions. It happens that, when increasing the gas velocity and the number density of drops, the signal experiences very strong fluctuations of the gas level, making the identification of individual droplets more difficult. That leads us to develop a new signal processing routine specifically adapted to such complex working conditions. At = / and for three liquid flow rates, the spatial integration of local liquid fluxes represents 92 to 99% of the injected liquid flow rate. These good results demonstrate that the Doppler probe provides reliable statistics on drops velocity and size.
△ Less
Submitted 18 October, 2021;
originally announced October 2021.
-
Energy-Efficient Power Control in Cell-Free and User-Centric Massive MIMO at Millimeter Wave
Authors:
Mario Alonzo,
Stefano Buzzi,
Alessio Zappone,
Ciro D'Elia
Abstract:
In a cell-free massive MIMO architecture a very large number of distributed access points simultaneously and jointly serves a much smaller number of mobile stations; a variant of the cell-free technique is the user-centric approach, wherein each access point just serves a reduced set of mobile stations. This paper introduces and analyzes the cell-free and user-centric architectures at millimeter w…
▽ More
In a cell-free massive MIMO architecture a very large number of distributed access points simultaneously and jointly serves a much smaller number of mobile stations; a variant of the cell-free technique is the user-centric approach, wherein each access point just serves a reduced set of mobile stations. This paper introduces and analyzes the cell-free and user-centric architectures at millimeter wave frequencies, considering a training-based channel estimation phase, and the downlink and uplink data transmission phases. First of all, a multiuser clustered millimeter wave channel model is introduced in order to account for the correlation among the channels of nearby users; second, an uplink multiuser channel estimation scheme is described along with low-complexity hybrid analog/digital beamforming architectures. Third, the non-convex problem of power allocation for downlink global energy efficiency maximization is addressed. Interestingly, in the proposed schemes no channel estimation is needed at the mobile stations, and the beamforming schemes used at the mobile stations are channel-independent and have a very simple structure. Numerical results show the benefits granted by the power control procedure, that the considered architectures are effective, and permit assessing the loss incurred by the use of the hybrid beamformers and by the channel estimation errors.
△ Less
Submitted 27 March, 2019;
originally announced March 2019.
-
Energy-Efficient Downlink Power Control in mmWave Cell-Free and User-Centric Massive MIMO
Authors:
Mario Alonzo,
Stefano Buzzi,
Alessio Zappone
Abstract:
This paper considers cell-free and user-centric approaches for coverage improvement in wireless cellular systems operating at millimeter wave frequencies, and proposes downlink power control algorithms aimed at maximizing the global energy efficiency. To tackle the non-convexity of the problems, an interaction between sequential and alternating optimization is considered. The use of hybrid analog/…
▽ More
This paper considers cell-free and user-centric approaches for coverage improvement in wireless cellular systems operating at millimeter wave frequencies, and proposes downlink power control algorithms aimed at maximizing the global energy efficiency. To tackle the non-convexity of the problems, an interaction between sequential and alternating optimization is considered. The use of hybrid analog/digital beamformers is also taken into account. The numerical results show the benefits obtained from the power control algorithm, as well as that the user-centric approach generally outperforms the cell-free one.
△ Less
Submitted 11 May, 2018;
originally announced May 2018.
-
Cell-Free and User-Centric Massive MIMO at Millimeter Wave Frequencies
Authors:
Mario Alonzo,
Stefano Buzzi
Abstract:
In a cell-free (CF) massive MIMO architecture a very large number of distributed access points (APs) simultaneously and jointly serves a much smaller number of mobile stations (MSs); a variant of the cell-free technique is the user-centric (UC) approach, wherein each AP just decodes a reduced set of MSs, practically the ones that are received best. This paper introduces and analyzes the CF and UC…
▽ More
In a cell-free (CF) massive MIMO architecture a very large number of distributed access points (APs) simultaneously and jointly serves a much smaller number of mobile stations (MSs); a variant of the cell-free technique is the user-centric (UC) approach, wherein each AP just decodes a reduced set of MSs, practically the ones that are received best. This paper introduces and analyzes the CF and UC architectures at millimeter wave (mmWave) frequencies. First of all, a multiuser clustered channel model is introduced in order to account for the correlation among the channels of nearby users; then, an uplink multiuser channel estimation scheme is described along with low-complexity hybrid analog/digital beamforming architectures. Interestingly, in the proposed scheme no channel estimation is needed at the MSs, and the beamforming schemes used at the MSs are channel-independent and have a very simple structure. Numerical results show that the considered architectures provide good performance, especially in lightly loaded systems, with the UC approach outperforming the CF one.
△ Less
Submitted 5 November, 2017; v1 submitted 21 October, 2017;
originally announced October 2017.
-
Geostatistical estimation of forest biomass in interior Alaska combining Landsat-derived tree cover, sampled airborne lidar and field observations
Authors:
Chad Babcock,
Andrew O. Finley,
Hans-Erik Andersen,
Robert Pattison,
Bruce D. Cook,
Douglas C. Morton,
Michael Alonzo,
Ross Nelson,
Timothy Gregoire,
Liviu Ene,
Terje Gobakken,
Erik Næsset
Abstract:
The goal of this research was to develop and examine the performance of a geostatistical coregionalization modeling approach for combining field inventory measurements, strip samples of airborne lidar and Landsat-based remote sensing data products to predict aboveground biomass (AGB) in interior Alaska's Tanana Valley. The proposed modeling strategy facilitates pixel-level map** of AGB density p…
▽ More
The goal of this research was to develop and examine the performance of a geostatistical coregionalization modeling approach for combining field inventory measurements, strip samples of airborne lidar and Landsat-based remote sensing data products to predict aboveground biomass (AGB) in interior Alaska's Tanana Valley. The proposed modeling strategy facilitates pixel-level map** of AGB density predictions across the entire spatial domain. Additionally, the coregionalization framework allows for statistically sound estimation of total AGB for arbitrary areal units within the study area---a key advance to support diverse management objectives in interior Alaska. This research focuses on appropriate characterization of prediction uncertainty in the form of posterior predictive coverage intervals and standard deviations. Using the framework detailed here, it is possible to quantify estimation uncertainty for any spatial extent, ranging from pixel-level predictions of AGB density to estimates of AGB stocks for the full domain. The lidar-informed coregionalization models consistently outperformed their counterpart lidar-free models in terms of point-level predictive performance and total AGB precision. Additionally, the inclusion of Landsat-derived forest cover as a covariate further improved estimation precision in regions with lower lidar sampling intensity. Our findings also demonstrate that model-based approaches that do not explicitly account for residual spatial dependence can grossly underestimate uncertainty, resulting in falsely precise estimates of AGB. On the other hand, in a geostatistical setting, residual spatial structure can be modeled within a Bayesian hierarchical framework to obtain statistically defensible assessments of uncertainty for AGB estimates.
△ Less
Submitted 20 December, 2017; v1 submitted 9 May, 2017;
originally announced May 2017.
