-
In-plane thermal diffusivity determination using beam-offset frequency-domain thermoreflectance with a one-dimensional optical heat source
Authors:
Kai Xu,
Jiali Guo,
Grazia Raciti,
Alejandro R. Goni,
M. Isabel Alonso,
Xavier Borrise,
Ilaria Zardo,
Mariano Campoy-Quiles,
Juan Sebastian Reparaz
Abstract:
We present an innovative contactless method suitable to study in-plane thermal transport based on beam-offset frequency-domain thermoreflectance using a one-dimensional heat source with uniform power distribution. Using a one-dimensional heat source provides a number of advantages as compared to point-like heat sources, as typically used in time- and frequency-domain thermoreflectance experiments,…
▽ More
We present an innovative contactless method suitable to study in-plane thermal transport based on beam-offset frequency-domain thermoreflectance using a one-dimensional heat source with uniform power distribution. Using a one-dimensional heat source provides a number of advantages as compared to point-like heat sources, as typically used in time- and frequency-domain thermoreflectance experiments, just to name a few: (i) it leads to a slower spatial decay of the temperature field in the direction perpendicular to the line-shaped heat source, allowing to probe the temperature field at larger distances from the heater, hence, enhancing the sensitivity to in-plane thermal transport; (ii) the frequency range of interest is typically < 100 kHz. This rather low frequency range is convenient regarding the cost of the required excitation laser system but, most importantly, it allows the study of materials without the presence of a metallic transducer with almost no influence of the finite optical penetration depth of the pump and probe beams on the thermal phase lag, which arises from the large thermal penetration depth imposed by the used frequency range. We also show that for the case of a harmonic thermal excitation source, the phase lag between the thermal excitation and thermal response of the sample exhibits a linear dependence with their spatial offset, where the slope is proportional to the inverse of the thermal diffusivity of the material. We demonstrate the applicability of this method to the cases of: (i) suspended thin films of Si and PDPP4T, (ii) Bi bulk samples, and (iii) Si, glass, and highly-oriented pyrollitic graphite (HOPG) bulk samples with a thin metallic transducer. Finally, we also show that it is possible to study in-plane heat transport on substrates with rather low thermal diffusivity, e.g., glass, even using a metallic transducer.
△ Less
Submitted 15 May, 2023;
originally announced May 2023.
-
Using Pressure to Unravel the Structure-Dynamic-Disorder Relationship in Metal Halide Perovskites
Authors:
Kai Xu,
Luis Pérez-Fidalgo,
Bethan L. Charles,
Mark T. Weller,
M. Isabel Alonso,
Alejandro R. Goñi
Abstract:
The exceptional optoelectronic properties of metal halide perovskites (MHPs) are presumed to arise, at least in part, from the peculiar interplay between the inorganic metal-halide sublattice and the atomic or molecular cations enclosed in the cage voids. The latter can exhibit a roto-translative dynamics, which is shown here to be at the origin of the structural behavior of MHPs as a function of…
▽ More
The exceptional optoelectronic properties of metal halide perovskites (MHPs) are presumed to arise, at least in part, from the peculiar interplay between the inorganic metal-halide sublattice and the atomic or molecular cations enclosed in the cage voids. The latter can exhibit a roto-translative dynamics, which is shown here to be at the origin of the structural behavior of MHPs as a function of temperature, pressure and composition. The application of high hydrostatic pressure allows for unraveling the nature of the interaction between both sublattices, characterized by the simultaneous action of hydrogen bonding and steric hindrance. In particular, we find that under the conditions of unleashed cation dynamics, the key factor that determines the structural stability of MHPs is the repulsive steric interaction rather than hydrogen bonding. Taking as example the results from pressure and temperature-dependent photoluminescence and Raman experiments on MAPbBr$_3$ but also considering the pertinent MHP literature, we provide a general picture about the relationship between the crystal structure and the presence or absence of cationic dynamic disorder. The reason for the structural sequences observed in MHPs with increasing temperature, pressure, A-site cation size or decreasing halide ionic radius is found principally in the strengthening of the dynamic steric interaction with the increase of the dynamic disorder. In this way, we have deepened our fundamental understanding of MHPs; knowledge that could be coined to improve performance in future optoelectronic devices based on this promising class of semiconductors.
△ Less
Submitted 11 May, 2023;
originally announced May 2023.
-
Efficient infrared sunlight absorbers based on gold-covered, inverted silicon pyramid arrays
Authors:
**hui Hu,
Luis A. Pérez,
Juan Luis Garcia-Pomar,
Agustín Mihi,
Miquel Garriga,
M. Isabel Alonso,
Alejandro R. Goñi
Abstract:
The transparency of silicon in the infrared region enables the design of nano/microstructures for implementation in devices to harvest the infrared (IR) part of the solar spectrum. Herein we report a strategy that uses arrays of inverted silicon pyramids covered with a thin gold film, which exhibit substantial light absorption in the infrared spectral range (below the gap of Si). The absorption st…
▽ More
The transparency of silicon in the infrared region enables the design of nano/microstructures for implementation in devices to harvest the infrared (IR) part of the solar spectrum. Herein we report a strategy that uses arrays of inverted silicon pyramids covered with a thin gold film, which exhibit substantial light absorption in the infrared spectral range (below the gap of Si). The absorption stems from the resonant excitation at infrared wavelengths of surface-plasmon polaritons at the metal/dielectric interface mainly by tuning size and separation of the inverted pyramids. The array-parameters optimization proceeded by iteration of the calculation and measurement of the infrared response using finite difference time-domain simulations and Fourier-transform IR spectroscopy, respectively. We show two fabrication routes for this kind of metal/silicon metamaterials either by photolithography or scalable nanoimprint techniques for a seamless integration in optoelectronic fabrication processes.
△ Less
Submitted 29 September, 2021;
originally announced September 2021.
-
Anisotropic Thermoreflectance Thermometry: A contactless frequency-domain approach to study anisotropic thermal transport
Authors:
L. A. Perez,
K. Xu,
M. R. Wagner,
B. Dorling,
A. Perevedentsev,
A. R. Goni,
M. Campoy-Quiles,
M. I. Alonso,
J. S. Reparaz
Abstract:
We developed a novel contactless frequency-domain approach to study thermal transport, which is particularly convenient when thermally anisotropic materials are considered. The method is based on a similar line-shaped heater geometry as used in the 3-omega method, however, kee** all the technical advantages offered by non-contact methodologies. The present method is especially suitable to determ…
▽ More
We developed a novel contactless frequency-domain approach to study thermal transport, which is particularly convenient when thermally anisotropic materials are considered. The method is based on a similar line-shaped heater geometry as used in the 3-omega method, however, kee** all the technical advantages offered by non-contact methodologies. The present method is especially suitable to determine all the elements of the thermal conductivity tensor, which is experimentally achieved by simply rotating the sample with respect to the line-shaped optical heater. We provide the mathematical solution of the heat equation for the cases of anisotropic substrates, multilayers, as well as thin films. This methodology allows an accurate determination of the thermal conductivity, and does not require complex modeling or intensive computational efforts to process the experimental data, i.e., the thermal conductivity is obtained through a simple linear fit ("slope method"), in a similar fashion as in the 3-omega method. We demonstrate the potential of this approach by studying isotropic and anisotropic materials in a wide range of thermal conductivities. In particular, we have studied the following inorganic and organic systems: (i) glass, Si, and Ge substrates (isotropic), (ii) $β$-Ga$_2$O$_3$, and a Kapton substrate (anisotropic) and , (iii) a 285 nm SiO$_2$/Si thin film. The accuracy in the determination of the thermal conductivity is estimated at $\approx$ 5\%, whereas the best temperature resolution is $Δ$T $\approx$ 3 mK.
△ Less
Submitted 2 September, 2021;
originally announced September 2021.
-
Observation of second sound in a rapidly varying temperature field in Ge
Authors:
Albert Beardo,
Miquel López-Suárez,
Luis Alberto Pérez,
Lluc Sendra,
Maria Isabel Alonso,
Claudio Melis,
Javier Bafaluy,
Juan Camacho,
Luciano Colombo,
Riccardo Rurali,
F. X. Alvarez,
Juan Sebastián Reparaz
Abstract:
Second sound is known as the thermal transport regime where heat is carried by temperature waves. Its experimental observation was previously restricted to a small number of materials, usually in rather narrow temperature windows. We show that it is possible to overcome these limitations by driving the system with a rapidly varying temperature field. This effect is demonstrated in bulk Ge between…
▽ More
Second sound is known as the thermal transport regime where heat is carried by temperature waves. Its experimental observation was previously restricted to a small number of materials, usually in rather narrow temperature windows. We show that it is possible to overcome these limitations by driving the system with a rapidly varying temperature field. This effect is demonstrated in bulk Ge between 7 kelvin and room temperature, studying the phase lag of the thermal response under a harmonic high frequency external thermal excitation, addressing the relaxation time and the propagation velocity of the heat waves. These results provide a new route to investigate the potential of wave-like heat transport in almost any material, opening opportunities to control heat through its oscillatory nature.
△ Less
Submitted 8 January, 2021; v1 submitted 10 July, 2020;
originally announced July 2020.
-
On the role of the electron-phonon interaction in the temperature dependence of the gap of lead halide perovskites
Authors:
A. Francisco-López,
B. Charles,
O. J. Weber,
M. I. Alonso,
M. Garriga,
M. Campoy-Quiles,
M. T. Weller,
A. R. ~Goñi
Abstract:
Lead halide perovskites are causing a change of paradigm in photovoltaics. Among other peculiarities, these perovskites exhibit an atypical temperature dependence of the fundamental optical gap: It decreases in energy with decreasing temperature. So far reports ascribe such a behavior to a particularly strong electron-phonon renormalization of the band gap, neglecting completely contributions from…
▽ More
Lead halide perovskites are causing a change of paradigm in photovoltaics. Among other peculiarities, these perovskites exhibit an atypical temperature dependence of the fundamental optical gap: It decreases in energy with decreasing temperature. So far reports ascribe such a behavior to a particularly strong electron-phonon renormalization of the band gap, neglecting completely contributions from thermal expansion effects. However, high pressure experiments performed, for instance, on the archetypal perovskite MAPbI$_3$, where MA stands for methylammonium, yield a negative pressure coefficient for the gap of the tetragonal room-temperature phase, which speaks against the assumption of a negligible gap shift due to thermal expansion. On the basis of the high pressure results, we show here that for MAPbI$_3$ the temperature-induced gap renormalization due to electron-phonon interaction can only account for about 40\% of the total energy shift, thus implying thermal expansion to be the dominant term. Furthermore, this result possesses general validity, holding also for the tetragonal or cubic phase, stable at ambient conditions, of other halide perovskite counterparts.
△ Less
Submitted 25 March, 2019;
originally announced March 2019.
-
Dynamic disorder, phonon lifetimes, and the assignment of modes to the vibrational spectra of methylammonium lead halide perovskites
Authors:
Aurélien M. A. Leguy,
Alejandro R. Goñi,
Jarvist M. Frost,
Jonathan Skelton,
Federico Brivio,
Xabier Rodríguez-Martínez,
Oliver J. Weber,
Anuradha Pallipurath,
M. Isabel Alonso,
Mariano Campoy-Quiles,
Mark T. Weller,
Jenny Nelson,
Aron Walsh,
Piers R. F. Barnes
Abstract:
We present Raman and terahertz absorbance spectra of methylammonium lead halide single crystals (MAPbX3, X = I, Br, Cl) at temperatures between 80 and 370 K. These results show good agreement with density-functional-theory phonon calculations.1 Comparison of experimental spectra and calculated vibrational modes enables confident assignment of most of the vibrational features between 50 and 3500 cm…
▽ More
We present Raman and terahertz absorbance spectra of methylammonium lead halide single crystals (MAPbX3, X = I, Br, Cl) at temperatures between 80 and 370 K. These results show good agreement with density-functional-theory phonon calculations.1 Comparison of experimental spectra and calculated vibrational modes enables confident assignment of most of the vibrational features between 50 and 3500 cm-1. Reorientation of the methylammonium cations, unlocked in their cavities at the orthorhombic-to-tetragonal phase transition, plays a key role in sha** the vibrational spectra of the different compounds. Calculations show that these dynamics effects split Raman peaks and create more structure than predicted from the independent harmonic modes. This explains the presence of extra peaks in the experimental spectra that have been a source of confusion in earlier studies. We discuss singular features, in particular the torsional vibration of the C-N axis, which is the only molecular mode that is strongly influenced by the size of the lattice. From analysis of the spectral linewidths, we find that MAPbI3 shows exceptionally short phonon lifetimes, which can be linked to low lattice thermal conductivity. We show that optical rather than acoustic phonon scattering is likely to prevail at room temperature in these materials.
△ Less
Submitted 6 June, 2016;
originally announced June 2016.
-
Optical functions and electronic structure of CuInSe2, CuGaSe2, CuInS2, and CuGaS2
Authors:
M. I. Alonso,
K. Wakita,
J. Pascual,
M. Garriga,
N. Yamamoto
Abstract:
We report on the complex dielectric tensor components of four chalcopyrite semiconductors in the optical energy range (1.4-5.2 eV, from 0.9 eV for CuInSe2) determined at room temperature by spectroscopic ellipsometry. Our results were obtained on single crystals of CuInSe2, CuGaSe2, CuInS2, and CuGaS2. Values of refractive indices n, extinction coefficients k and normal-incidence reflectivity R…
▽ More
We report on the complex dielectric tensor components of four chalcopyrite semiconductors in the optical energy range (1.4-5.2 eV, from 0.9 eV for CuInSe2) determined at room temperature by spectroscopic ellipsometry. Our results were obtained on single crystals of CuInSe2, CuGaSe2, CuInS2, and CuGaS2. Values of refractive indices n, extinction coefficients k and normal-incidence reflectivity R in the two different polarizations are given and compared with earlier data where available. We analyze in detail the structures of the dielectric function observed in the studied energy region. Critical-point parameters of electronic transitions are obtained from fitting of numerically calculated second-derivative spectra. Experimental energies and polarizations are discussed on the basis of published band structure calculations.
△ Less
Submitted 4 December, 2001;
originally announced December 2001.
-
Optical studies of gap, hop** energies and the Anderson-Hubbard parameter in the zigzag-chain compound SrCuO2
Authors:
Z. V. Popovic,
V. A. Ivanov,
M. J. Konstantinovic,
A. Cantarero,
J. Martinez-Pastor,
D. Olguin,
M. I. Alonso,
M. Garriga,
O. P. Khuong,
A. Vietkin,
V. V. Moshchalkov
Abstract:
We have investigated the electronic structure of the zigzag ladder (chain) compound SrCuO2 combining polarized optical absorption, reflection, photoreflectance and pseudo-dielectric function measurements with the model calculations. These measurements yield an energy gap of 1.42 eV (1.77 eV) at 300 K along (perpendicular) to the Cu-O chains. We have found that the lowest energy gap, the correlat…
▽ More
We have investigated the electronic structure of the zigzag ladder (chain) compound SrCuO2 combining polarized optical absorption, reflection, photoreflectance and pseudo-dielectric function measurements with the model calculations. These measurements yield an energy gap of 1.42 eV (1.77 eV) at 300 K along (perpendicular) to the Cu-O chains. We have found that the lowest energy gap, the correlation gap, is temperature independent. The electronic structure of this oxide is calculated using both the local-spin-density-approximation with gradient correction method, and the tight-binding theory for the correlated electrons. The calculated density of electronic states for non-correlated and correlated electrons shows quasi-one-dimensional character. The correlation gap values of 1.42 eV (indirect transition) and 1.88 eV (direct transition) have been calculated with the electron hop** parameters t = 0.30 eV (along a chain), t_yz = 0.12 eV (between chains) and the Anderson-Hubbard repulsion on copper sites U= 2.0 eV. We concluded that SrCuO_2 belongs to the correlated-gap insulators.
△ Less
Submitted 19 January, 2001;
originally announced January 2001.
