-
Morphotropic Phase Boundary in Sm-Substituted BiFeO3 Ceramics: Local vs Microscopic Approaches
Authors:
A. Pakalniskis,
R. Skaudzius,
D. V. Zhaludkevich,
A. L. Zhaludkevich,
D. O. Alikin,
A. S. Abramov,
T. Murauskas,
V. Ya. Shur,
A. A. Dronov,
M. V. Silibin,
A. Selskis,
R. Ramanauskas,
A. Lukowiak,
W. Strek,
D. V. Karpinsky,
A. Kareiva
Abstract:
Samarium substituted bismuth ferrite (BiFeO3) ceramics prepared by sol-gel synthesis method were studied using both local scale and microscopic measurement techniques in order to clarify an evolution of the crystal structure of the compounds across the morphotropic phase boundary region. X-ray diffraction analysis, transmission and scanning electron microscopies, XPS, EDS/EDX experiments and piezo…
▽ More
Samarium substituted bismuth ferrite (BiFeO3) ceramics prepared by sol-gel synthesis method were studied using both local scale and microscopic measurement techniques in order to clarify an evolution of the crystal structure of the compounds across the morphotropic phase boundary region. X-ray diffraction analysis, transmission and scanning electron microscopies, XPS, EDS/EDX experiments and piezoresponse force microscopy were used to study the structural transitions from the polar active rhombohedral phase to the anti-polar orthorhombic phase and then to the non-polar orthorhombic phase, observed in the Bi1-xSmxFeO3 compounds within the concentration range of 0.08 < x < 0.2. The results obtained by microscopic techniques testify that the compounds in the range of 0.12 < x < 0.15 are characterized by two phase structural state formed by a coexistence of the rhombohedral and the anti-polar orthorhombic phases; two phase structural state observed in the compounds with 0.15 < x < 0.18 is associated with a coexistence of the anti-polar orthorhombic and the non-polar orthorhombic phases. Local scale measurements have revealed a notable difference in the concentration range ascribed to the morphotropic phase boundary estimated by microscopic measurements, the obtained results testify a wider concentration range ascribed to a coexistence of different structural phases, the background of the mentioned difference is discussed.
△ Less
Submitted 15 April, 2021;
originally announced April 2021.
-
A Combined Theoretical and Experimental Study of the Phase Coexistence and Morphotropic Boundaries in Ferroelectric-Antiferroelectric-Antiferrodistortive Multiferroics
Authors:
Anna N. Morozovska,
Dmitry V. Karpinsky,
Denis O. Alikin,
Alexander Abramov,
Eugene A. Eliseev,
Maya D. Glinchuk,
Andrii D. Yaremkevich,
Olena M. Fesenko,
Tamara V. Tsebrienko,
A. Pakalniškis,
A. Kareiva,
Maxim V. Silibin,
Vitali V. Sidski,
Sergei V. Kalinin,
Andrei L Kholkin
Abstract:
The physical nature of the ferroelectric (FE), ferrielectric (FEI) and antiferroelectric (AFE) phases, their coexistence and spatial distributions underpin the functionality of antiferrodistortive (AFD) multiferroics in the vicinity of morphotropic phase transitions. Using Landau-Ginzburg-Devonshire (LGD) phenomenology and a semi-microscopic four sublattice model (FSM), we explore the behavior of…
▽ More
The physical nature of the ferroelectric (FE), ferrielectric (FEI) and antiferroelectric (AFE) phases, their coexistence and spatial distributions underpin the functionality of antiferrodistortive (AFD) multiferroics in the vicinity of morphotropic phase transitions. Using Landau-Ginzburg-Devonshire (LGD) phenomenology and a semi-microscopic four sublattice model (FSM), we explore the behavior of different AFE, FEI and FE long-range orderings and their coexistence at the morphotropic phase boundaries in FE-AFE-AFD multiferroics. These theoretical predictions are compared with the experimental observations for dense Bi1-yRyFeO3 ceramics, where R is Sm or La atoms with the fraction 0 < y< 0.25, as confirmed by the X-ray diffraction (XRD) and Piezoresponse Force Microscopy (PFM). These complementary measurements were used to study the macroscopic and nanoscopic transformation of the crystal structure with the do**. The comparison of the measured and calculated AFE/FE phase fractions demonstrate that the LGD-FSM approach well describes the experimental results obtained by XRD and PFM for Bi1-yRyFeO3. Hence, this combined theoretical and experimental approach provides further insight into the origin of the morphotropic boundaries and coexisting FE and AFE states in model rare-earth doped multiferroics.
△ Less
Submitted 14 February, 2021; v1 submitted 30 December, 2020;
originally announced December 2020.
-
Nanoscale ferroelectricity in pseudo-cubic sol-gel derived barium titanate -- bismuth ferrite (BaTiO$_3$-BiFeO$_3$) solid solutions
Authors:
A. Pakalniskis A. Lukowiak,
G. Niaura,
P. Gluchowski,
D. V. Karpinsky,
D. O. Alikin,
A. S. Abramov,
A. Zhaludkevich,
M. Silibin,
A. L. Kholkin,
R. Skaudzius,
W. Strek,
A. Kareiva
Abstract:
Single phase barium titanate-bismuth ferrite ((1-x)BaTi$_3$-(x)BiFe$_3$, BTO-BFO) solid solutions were prepared using citric acid and ethylene glycol assisted sol-gel synthesis method. Depending on the dopant content the samples are characterized by tetragonal, tetragonal-pseudocubic, pseudocubic and rhombohedral structure as confirmed by Raman spectroscopy and XRD measurements. An increase of the…
▽ More
Single phase barium titanate-bismuth ferrite ((1-x)BaTi$_3$-(x)BiFe$_3$, BTO-BFO) solid solutions were prepared using citric acid and ethylene glycol assisted sol-gel synthesis method. Depending on the dopant content the samples are characterized by tetragonal, tetragonal-pseudocubic, pseudocubic and rhombohedral structure as confirmed by Raman spectroscopy and XRD measurements. An increase of the BFO content leads to a reduction in the cell parameters accompanied by a decrease in polar distortion of the unit cell wherein an average particle size increases from 60 up to 350 nm. Non zero piezoresponse was observed in the compounds with pseudocubic structure while no polar distortion was detected in their crystal structure using X-ray diffraction method. The origin of the observed non-negligible piezoresponse was discussed assuming a coexistence of nanoscale polar and non-polar phases attributed to the solid solutions with high BFO content. A coexistence of the nanoscale regions having polar and non-polar character is considered as a key factor to increase macroscopic piezoresponse in the related compounds due to increased mobility of the domain walls and phase boundaries.
△ Less
Submitted 25 November, 2020;
originally announced November 2020.
-
Local electronic transport across probe/ionic conductor interface in scanning probe microscopy
Authors:
K. N. Romanuk,
D. O. Alikin,
B. N. Slautin,
A. Tselev,
V. Ya. Shur,
A. L. Kholkin
Abstract:
Charge carrier transport through the probe-sample junction can have substantial consequences for outcomes of electrical and electromechanical atomic-force-microscopy (AFM) measurements. For understanding physical processes under the probe, we carried out conductive-AFM (C-AFM) measurements of local current-voltage (I-V) curves as well as their derivatives on samples of a mixed ionic-electronic con…
▽ More
Charge carrier transport through the probe-sample junction can have substantial consequences for outcomes of electrical and electromechanical atomic-force-microscopy (AFM) measurements. For understanding physical processes under the probe, we carried out conductive-AFM (C-AFM) measurements of local current-voltage (I-V) curves as well as their derivatives on samples of a mixed ionic-electronic conductor Li1-xMn2O4 and developed an analytical framework for the data analysis. The implemented approach discriminates between contributions of a highly resistive sample surface layer and bulk with the account of ion redistribution in the field of the probe. It was found that with increasing probe voltage, the conductance mechanism in the surface layer transforms from Pool-Frenkel to space-charge-limited current. The surface layer significantly alters the ion dynamics in the sample bulk under the probe, which leads, in particular, to a decrease of the effective electromechanical AFM signal associated with the ionic motion in the sample. The framework can be applied for the analysis of mechanisms of electronic transport across the probe/sample interface as well as the role of the charge transport in the electric field distribution, mechanical, and other responses in AFM measurements of a broad spectrum of conducting materials.
△ Less
Submitted 1 May, 2020;
originally announced May 2020.
