-
Deep Reinforcement Learning for Sim-to-Real Policy Transfer of VTOL-UAVs Offshore Docking Operations
Authors:
Ali M. Ali,
Aryaman Gupta,
Hashim A. Hashim
Abstract:
This paper proposes a novel Reinforcement Learning (RL) approach for sim-to-real policy transfer of Vertical Take-Off and Landing Unmanned Aerial Vehicle (VTOL-UAV). The proposed approach is designed for VTOL-UAV landing on offshore docking stations in maritime operations. VTOL-UAVs in maritime operations encounter limitations in their operational range, primarily stemming from constraints imposed…
▽ More
This paper proposes a novel Reinforcement Learning (RL) approach for sim-to-real policy transfer of Vertical Take-Off and Landing Unmanned Aerial Vehicle (VTOL-UAV). The proposed approach is designed for VTOL-UAV landing on offshore docking stations in maritime operations. VTOL-UAVs in maritime operations encounter limitations in their operational range, primarily stemming from constraints imposed by their battery capacity. The concept of autonomous landing on a charging platform presents an intriguing prospect for mitigating these limitations by facilitating battery charging and data transfer. However, current Deep Reinforcement Learning (DRL) methods exhibit drawbacks, including lengthy training times, and modest success rates. In this paper, we tackle these concerns comprehensively by decomposing the landing procedure into a sequence of more manageable but analogous tasks in terms of an approach phase and a landing phase. The proposed architecture utilizes a model-based control scheme for the approach phase, where the VTOL-UAV is approaching the offshore docking station. In the Landing phase, DRL agents were trained offline to learn the optimal policy to dock on the offshore station. The Joint North Sea Wave Project (JONSWAP) spectrum model has been employed to create a wave model for each episode, enhancing policy generalization for sim2real transfer. A set of DRL algorithms have been tested through numerical simulations including value-based agents and policy-based agents such as Deep \textit{Q} Networks (DQN) and Proximal Policy Optimization (PPO) respectively. The numerical experiments show that the PPO agent can learn complicated and efficient policies to land in uncertain environments, which in turn enhances the likelihood of successful sim-to-real transfer.
△ Less
Submitted 2 June, 2024;
originally announced June 2024.
-
Full private delegated quantum computing tailored from user to industry
Authors:
Alejandro Mata Ali,
Adriano Mauricio Lusso,
Edgar Mencia
Abstract:
In this paper, we present a set of private and secure delegated quantum computing protocols and techniques tailored to user-level and industry-level use cases, depending on the computational resources available to the client, the specific privacy needs required, and the type of algorithm. Our protocols are presented at a high level as they are independent of the particular algorithm used for such…
▽ More
In this paper, we present a set of private and secure delegated quantum computing protocols and techniques tailored to user-level and industry-level use cases, depending on the computational resources available to the client, the specific privacy needs required, and the type of algorithm. Our protocols are presented at a high level as they are independent of the particular algorithm used for such encryption and decryption processes. Additionally, we propose a method to verify the correct execution of operations by the external server.
△ Less
Submitted 24 May, 2024; v1 submitted 19 May, 2024;
originally announced May 2024.
-
Técnicas Quantum-Inspired en Tensor Networks para Contextos Industriales
Authors:
Alejandro Mata Ali,
Iñigo Perez Delgado,
Aitor Moreno Fdez. de Leceta
Abstract:
In this paper we present a study of the applicability and feasibility of quantum-inspired algorithms and techniques in tensor networks for industrial environments and contexts, with a compilation of the available literature and an analysis of the use cases that may be affected by such methods. In addition, we explore the limitations of such techniques in order to determine their potential scalabil…
▽ More
In this paper we present a study of the applicability and feasibility of quantum-inspired algorithms and techniques in tensor networks for industrial environments and contexts, with a compilation of the available literature and an analysis of the use cases that may be affected by such methods. In addition, we explore the limitations of such techniques in order to determine their potential scalability.
△ Less
Submitted 8 March, 2024;
originally announced April 2024.
-
Quantum-inspired Techniques in Tensor Networks for Industrial Contexts
Authors:
Alejandro Mata Ali,
Iñigo Perez Delgado,
Aitor Moreno Fdez. de Leceta
Abstract:
In this paper we present a study of the applicability and feasibility of quantum-inspired algorithms and techniques in tensor networks for industrial environments and contexts, with a compilation of the available literature and an analysis of the use cases that may be affected by such methods. In addition, we explore the limitations of such techniques in order to determine their potential scalabil…
▽ More
In this paper we present a study of the applicability and feasibility of quantum-inspired algorithms and techniques in tensor networks for industrial environments and contexts, with a compilation of the available literature and an analysis of the use cases that may be affected by such methods. In addition, we explore the limitations of such techniques in order to determine their potential scalability.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
A Linear MPC with Control Barrier Functions for Differential Drive Robots
Authors:
Ali Mohamed Ali,
Chao Shen,
Hashim A. Hashim
Abstract:
The need for fully autonomous mobile robots has surged over the past decade, with the imperative of ensuring safe navigation in a dynamic setting emerging as a primary challenge impeding advancements in this domain. In this paper, a Safety Critical Model Predictive Control based on Dynamic Feedback Linearization tailored to the application of differential drive robots with two wheels is proposed t…
▽ More
The need for fully autonomous mobile robots has surged over the past decade, with the imperative of ensuring safe navigation in a dynamic setting emerging as a primary challenge impeding advancements in this domain. In this paper, a Safety Critical Model Predictive Control based on Dynamic Feedback Linearization tailored to the application of differential drive robots with two wheels is proposed to generate control signals that result in obstacle-free paths. A barrier function introduces a safety constraint to the optimization problem of the Model Predictive Control (MPC) to prevent collisions. Due to the intrinsic nonlinearities of the differential drive robots, computational complexity while implementing a Nonlinear Model Predictive Control (NMPC) arises. To facilitate the real-time implementation of the optimization problem and to accommodate the underactuated nature of the robot, a combination of Linear Model Predictive Control (LMPC) and Dynamic Feedback Linearization (DFL) is proposed. The MPC problem is formulated on a linear equivalent model of the differential drive robot rendered by the DFL controller. The analysis of the closed-loop stability and recursive feasibility of the proposed control design is discussed. Numerical experiments illustrate the robustness and effectiveness of the proposed control synthesis in avoiding obstacles with respect to the benchmark of using Euclidean distance constraints. Keywords: Model Predictive Control, MPC, Autonomous Ground Vehicles, Nonlinearity, Dynamic Feedback Linearization, Optimal Control, Differential Robots.
△ Less
Submitted 14 April, 2024;
originally announced April 2024.
-
MPC Based Linear Equivalence with Control Barrier Functions for VTOL-UAVs
Authors:
Ali Mohamed Ali,
Hashim A. Hashim,
Chao Shen
Abstract:
In this work, we propose a cascaded scheme of linear Model prediction Control (MPC) based on Control Barrier Functions (CBF) with Dynamic Feedback Linearization (DFL) for Vertical Take-off and Landing (VTOL) Unmanned Aerial Vehicles (UAVs). CBF is a tool that allows enforcement of forward invariance of a set using Lyapunov-like functions to ensure safety. The First control synthesis that employed…
▽ More
In this work, we propose a cascaded scheme of linear Model prediction Control (MPC) based on Control Barrier Functions (CBF) with Dynamic Feedback Linearization (DFL) for Vertical Take-off and Landing (VTOL) Unmanned Aerial Vehicles (UAVs). CBF is a tool that allows enforcement of forward invariance of a set using Lyapunov-like functions to ensure safety. The First control synthesis that employed CBF was based on Quadratic Program (QP) that modifies the existing controller to satisfy the safety requirements. However, the CBF-QP-based controllers leading to longer detours and undesirable transient performance. Recent contributions utilize the framework of MPC benefiting from the prediction capabilities and constraints imposed on the state and control inputs. Due to the intrinsic nonlinearities of the dynamics of robotics systems, all the existing MPC-CBF solutions rely on nonlinear MPC formulations or operate on less accurate linear models. In contrast, our novel solution unlocks the benefits of linear MPC-CBF while considering the full underactuated dynamics without any linear approximations. The cascaded scheme converts the problem of safe VTOL-UAV navigation to a Quadratic Constraint Quadratic Programming (QCQP) problem solved efficiently by off-the-shelf solvers. The closed-loop stability and recursive feasibility is proved along with numerical simulations showing the effective and robust solutions. Keywords: Unmanned Aerial Vehicles, Vertical Take-off and Landing, Model Predictive Control, MPC, Nonlinearity, Dynamic Feedback Linearization, Optimal Control.
△ Less
Submitted 14 April, 2024;
originally announced April 2024.
-
Approximation Algorithms for Preference Aggregation Using CP-Nets
Authors:
Abu Mohammmad Hammad Ali,
Boting Yang,
Sandra Zilles
Abstract:
This paper studies the design and analysis of approximation algorithms for aggregating preferences over combinatorial domains, represented using Conditional Preference Networks (CP-nets). Its focus is on aggregating preferences over so-called \emph{swaps}, for which optimal solutions in general are already known to be of exponential size. We first analyze a trivial 2-approximation algorithm that s…
▽ More
This paper studies the design and analysis of approximation algorithms for aggregating preferences over combinatorial domains, represented using Conditional Preference Networks (CP-nets). Its focus is on aggregating preferences over so-called \emph{swaps}, for which optimal solutions in general are already known to be of exponential size. We first analyze a trivial 2-approximation algorithm that simply outputs the best of the given input preferences, and establish a structural condition under which the approximation ratio of this algorithm is improved to $4/3$. We then propose a polynomial-time approximation algorithm whose outputs are provably no worse than those of the trivial algorithm, but often substantially better. A family of problem instances is presented for which our improved algorithm produces optimal solutions, while, for any $\varepsilon$, the trivial algorithm can\emph{not}\/ attain a $(2-\varepsilon)$-approximation. These results may lead to the first polynomial-time approximation algorithm that solves the CP-net aggregation problem for swaps with an approximation ratio substantially better than $2$.
△ Less
Submitted 15 December, 2023; v1 submitted 14 December, 2023;
originally announced December 2023.
-
Traveling Salesman Problem from a Tensor Networks Perspective
Authors:
Alejandro Mata Ali,
Iñigo Perez Delgado,
Aitor Moreno Fdez. de Leceta
Abstract:
We present a novel quantum-inspired algorithm for solving the Traveling Salesman Problem (TSP) and some of its variations using tensor networks. This approach consists on the simulated initialization of a quantum system with superposition of all possible combinations, an imaginary time evolution, a projection, and lastly a partial trace to search for solutions. We adapt it to different generalizat…
▽ More
We present a novel quantum-inspired algorithm for solving the Traveling Salesman Problem (TSP) and some of its variations using tensor networks. This approach consists on the simulated initialization of a quantum system with superposition of all possible combinations, an imaginary time evolution, a projection, and lastly a partial trace to search for solutions. We adapt it to different generalizations of the TSP and apply it to the job reassignment problem, a real productive industrial case.
△ Less
Submitted 24 November, 2023;
originally announced November 2023.
-
Task Scheduling Optimization from a Tensor Network Perspective
Authors:
Alejandro Mata Ali,
Iñigo Perez Delgado,
Beatriz García Markaida,
Aitor Moreno Fdez. de Leceta
Abstract:
We present a novel method for task optimization in industrial plants using quantum-inspired tensor network technology. This method allows us to obtain the best possible combination of tasks on a set of machines with a set of constraints without having to evaluate all possible combinations. We simulate a quantum system with all possible combinations, perform an imaginary time evolution and a series…
▽ More
We present a novel method for task optimization in industrial plants using quantum-inspired tensor network technology. This method allows us to obtain the best possible combination of tasks on a set of machines with a set of constraints without having to evaluate all possible combinations. We simulate a quantum system with all possible combinations, perform an imaginary time evolution and a series of projections to satisfy the constraints. We improve its scalability by means of a compression method, an iterative algorithm, and a genetic algorithm, and show the results obtained on simulated cases.
△ Less
Submitted 20 June, 2024; v1 submitted 17 November, 2023;
originally announced November 2023.
-
QUBO Resolution of the Job Reassignment Problem
Authors:
Iñigo Perez Delgado,
Beatriz García Markaida,
Alejandro Mata Ali,
Aitor Moreno Fdez. de Leceta
Abstract:
We present a subproblemation scheme for heuristical solving of the JSP (Job Reassignment Problem). The cost function of the JSP is described via a QUBO hamiltonian to allow implementation in both gate-based and annealing quantum computers. For a job pool of $K$ jobs, $\mathcal{O}(K^2)$ binary variables -- qubits -- are needed to solve the full problem, for a runtime of $\mathcal{O}(2^{K^2})$. With…
▽ More
We present a subproblemation scheme for heuristical solving of the JSP (Job Reassignment Problem). The cost function of the JSP is described via a QUBO hamiltonian to allow implementation in both gate-based and annealing quantum computers. For a job pool of $K$ jobs, $\mathcal{O}(K^2)$ binary variables -- qubits -- are needed to solve the full problem, for a runtime of $\mathcal{O}(2^{K^2})$. With the presented heuristics, the average variable number of each of the $D$ subproblems to solve is $\mathcal{O}(K^2/2D)$, and the expected total runtime $\mathcal{O}(D2^{K^2/2D})$, achieving an exponential speedup.
△ Less
Submitted 29 September, 2023; v1 submitted 28 September, 2023;
originally announced September 2023.
-
Guided Frequency Loss for Image Restoration
Authors:
Bilel Benjdira,
Anas M. Ali,
Anis Koubaa
Abstract:
Image Restoration has seen remarkable progress in recent years. Many generative models have been adapted to tackle the known restoration cases of images. However, the interest in benefiting from the frequency domain is not well explored despite its major factor in these particular cases of image synthesis. In this study, we propose the Guided Frequency Loss (GFL), which helps the model to learn in…
▽ More
Image Restoration has seen remarkable progress in recent years. Many generative models have been adapted to tackle the known restoration cases of images. However, the interest in benefiting from the frequency domain is not well explored despite its major factor in these particular cases of image synthesis. In this study, we propose the Guided Frequency Loss (GFL), which helps the model to learn in a balanced way the image's frequency content alongside the spatial content. It aggregates three major components that work in parallel to enhance learning efficiency; a Charbonnier component, a Laplacian Pyramid component, and a Gradual Frequency component. We tested GFL on the Super Resolution and the Denoising tasks. We used three different datasets and three different architectures for each of them. We found that the GFL loss improved the PSNR metric in most implemented experiments. Also, it improved the training of the Super Resolution models in both SwinIR and SRGAN. In addition, the utility of the GFL loss increased better on constrained data due to the less stochasticity in the high frequencies' components among samples.
△ Less
Submitted 22 October, 2023; v1 submitted 27 September, 2023;
originally announced September 2023.
-
License Plate Super-Resolution Using Diffusion Models
Authors:
Sawsan AlHalawani,
Bilel Benjdira,
Adel Ammar,
Anis Koubaa,
Anas M. Ali
Abstract:
In surveillance, accurately recognizing license plates is hindered by their often low quality and small dimensions, compromising recognition precision. Despite advancements in AI-based image super-resolution, methods like Convolutional Neural Networks (CNNs) and Generative Adversarial Networks (GANs) still fall short in enhancing license plate images. This study leverages the cutting-edge diffusio…
▽ More
In surveillance, accurately recognizing license plates is hindered by their often low quality and small dimensions, compromising recognition precision. Despite advancements in AI-based image super-resolution, methods like Convolutional Neural Networks (CNNs) and Generative Adversarial Networks (GANs) still fall short in enhancing license plate images. This study leverages the cutting-edge diffusion model, which has consistently outperformed other deep learning techniques in image restoration. By training this model using a curated dataset of Saudi license plates, both in low and high resolutions, we discovered the diffusion model's superior efficacy. The method achieves a 12.55\% and 37.32% improvement in Peak Signal-to-Noise Ratio (PSNR) over SwinIR and ESRGAN, respectively. Moreover, our method surpasses these techniques in terms of Structural Similarity Index (SSIM), registering a 4.89% and 17.66% improvement over SwinIR and ESRGAN, respectively. Furthermore, 92% of human evaluators preferred our images over those from other algorithms. In essence, this research presents a pioneering solution for license plate super-resolution, with tangible potential for surveillance systems.
△ Less
Submitted 21 September, 2023;
originally announced September 2023.
-
Polynomial-time Solver of Tridiagonal QUBO and QUDO problems with Tensor Networks
Authors:
Alejandro Mata Ali,
Iñigo Perez Delgado,
Marina Ristol Roura,
Aitor Moreno Fdez. de Leceta
Abstract:
We present an algorithm for solving tridiagonal Quadratic Unconstrained Binary Optimization (QUBO) problems and Quadratic Unconstrained Discrete Optimization (QUDO) problems with one-neighbor interactions using the quantum-inspired technology of tensor networks. Our method is based on the simulation of a quantum state to which we will apply an imaginary time evolution and perform a series of parti…
▽ More
We present an algorithm for solving tridiagonal Quadratic Unconstrained Binary Optimization (QUBO) problems and Quadratic Unconstrained Discrete Optimization (QUDO) problems with one-neighbor interactions using the quantum-inspired technology of tensor networks. Our method is based on the simulation of a quantum state to which we will apply an imaginary time evolution and perform a series of partial traces to obtain the state of maximum amplitude, since it will be the optimal state. We will also deal with the degenerate case and check the polynomial complexity of the algorithm.
△ Less
Submitted 22 April, 2024; v1 submitted 19 September, 2023;
originally announced September 2023.
-
Efficient Finite Initialization for Tensorized Neural Networks
Authors:
Alejandro Mata Ali,
Iñigo Perez Delgado,
Marina Ristol Roura,
Aitor Moreno Fdez. de Leceta
Abstract:
We present a novel method for initializing layers of tensorized neural networks in a way that avoids the explosion of the parameters of the matrix it emulates. The method is intended for layers with a high number of nodes in which there is a connection to the input or output of all or most of the nodes. The core of this method is the use of the Frobenius norm of this layer in an iterative partial…
▽ More
We present a novel method for initializing layers of tensorized neural networks in a way that avoids the explosion of the parameters of the matrix it emulates. The method is intended for layers with a high number of nodes in which there is a connection to the input or output of all or most of the nodes. The core of this method is the use of the Frobenius norm of this layer in an iterative partial form, so that it has to be finite and within a certain range. This norm is efficient to compute, fully or partially for most cases of interest. We apply the method to different layers and check its performance. We create a Python function to run it on an arbitrary layer, available in a Jupyter Notebook in the i3BQuantum repository: https://github.com/i3BQuantumTeam/Q4Real/blob/e07c827651ef16bcf74590ab965ea3985143f891/Quantum-Inspired%20Variational%20Methods/Normalization_process.ipynb
△ Less
Submitted 25 September, 2023; v1 submitted 11 September, 2023;
originally announced September 2023.
-
Solving Systems of Linear Equations: HHL from a Tensor Networks Perspective
Authors:
Alejandro Mata Ali,
Iñigo Perez Delgado,
Marina Ristol Roura,
Aitor Moreno Fdez. de Leceta,
Sebastián V. Romero
Abstract:
We present an algorithm for solving systems of linear equations based on the HHL algorithm with a novel qudits methodology, a generalization of the qubits with more states, to reduce the number of gates to be applied and the amount of resources. Based on this idea, we perform a quantum-inspired version on tensor networks, taking advantage of their ability to perform non-unitary operations such as…
▽ More
We present an algorithm for solving systems of linear equations based on the HHL algorithm with a novel qudits methodology, a generalization of the qubits with more states, to reduce the number of gates to be applied and the amount of resources. Based on this idea, we perform a quantum-inspired version on tensor networks, taking advantage of their ability to perform non-unitary operations such as projection. The main novelty of this proposal is to perform a simulation as efficient as possible of the HHL algorithm in order to benchmark the algorithm steps according to its input parameters and the input matrix. Finally, we use this algorithm to obtain a solution for the harmonic oscillator with an external force, the forced damped oscillator and the 2D static heat equation differential equations.
△ Less
Submitted 6 June, 2024; v1 submitted 11 September, 2023;
originally announced September 2023.
-
ROSGPT_Vision: Commanding Robots Using Only Language Models' Prompts
Authors:
Bilel Benjdira,
Anis Koubaa,
Anas M. Ali
Abstract:
In this paper, we argue that the next generation of robots can be commanded using only Language Models' prompts. Every prompt interrogates separately a specific Robotic Modality via its Modality Language Model (MLM). A central Task Modality mediates the whole communication to execute the robotic mission via a Large Language Model (LLM). This paper gives this new robotic design pattern the name of:…
▽ More
In this paper, we argue that the next generation of robots can be commanded using only Language Models' prompts. Every prompt interrogates separately a specific Robotic Modality via its Modality Language Model (MLM). A central Task Modality mediates the whole communication to execute the robotic mission via a Large Language Model (LLM). This paper gives this new robotic design pattern the name of: Prompting Robotic Modalities (PRM). Moreover, this paper applies this PRM design pattern in building a new robotic framework named ROSGPT_Vision. ROSGPT_Vision allows the execution of a robotic task using only two prompts: a Visual and an LLM prompt. The Visual Prompt extracts, in natural language, the visual semantic features related to the task under consideration (Visual Robotic Modality). Meanwhile, the LLM Prompt regulates the robotic reaction to the visual description (Task Modality). The framework automates all the mechanisms behind these two prompts. The framework enables the robot to address complex real-world scenarios by processing visual data, making informed decisions, and carrying out actions automatically. The framework comprises one generic vision module and two independent ROS nodes. As a test application, we used ROSGPT_Vision to develop CarMate, which monitors the driver's distraction on the roads and makes real-time vocal notifications to the driver. We showed how ROSGPT_Vision significantly reduced the development cost compared to traditional methods. We demonstrated how to improve the quality of the application by optimizing the prompting strategies, without delving into technical details. ROSGPT_Vision is shared with the community (link: https://github.com/bilel-bj/ROSGPT_Vision) to advance robotic research in this direction and to build more robotic frameworks that implement the PRM design pattern and enables controlling robots using only prompts.
△ Less
Submitted 23 August, 2023; v1 submitted 22 August, 2023;
originally announced August 2023.
-
Qubit Number Optimization for Restriction Terms of QUBO Hamiltonians
Authors:
Iñigo Perez Delgado,
Beatriz García Markaida,
Alejandro Mata Ali,
Aitor Moreno Fdez. de Leceta
Abstract:
In usual restriction terms of the Quadratic Unconstrained Binary Optimization (QUBO) hamiltonians, a integer number of logical qubits R, called the Integer Restriction Coefficient (IRC), are forced to stay active. In this paper we gather the well-known methods of implementing these restrictions, as well as some novel methods that show to be more efficient in some frequently implemented cases. More…
▽ More
In usual restriction terms of the Quadratic Unconstrained Binary Optimization (QUBO) hamiltonians, a integer number of logical qubits R, called the Integer Restriction Coefficient (IRC), are forced to stay active. In this paper we gather the well-known methods of implementing these restrictions, as well as some novel methods that show to be more efficient in some frequently implemented cases. Moreover, it is mathematically allowed to ask for fractional values of $R$. For these Fractionary Restriction Coefficients (FRC) we show how they can reduce the number of qubits needed to implement the restriction hamiltonian even further. Lastly, we characterize the response of DWave's Advantage$\_$system4.1 Quantum Annealer (QA) when faced with the implementation of FRCs, and offer a summary guide of the presented methods and the situations each of them is to be used.
△ Less
Submitted 12 June, 2023;
originally announced June 2023.
-
Streamlined Global and Local Features Combinator (SGLC) for High Resolution Image Dehazing
Authors:
Bilel Benjdira,
Anas M. Ali,
Anis Koubaa
Abstract:
Image Dehazing aims to remove atmospheric fog or haze from an image. Although the Dehazing models have evolved a lot in recent years, few have precisely tackled the problem of High-Resolution hazy images. For this kind of image, the model needs to work on a downscaled version of the image or on cropped patches from it. In both cases, the accuracy will drop. This is primarily due to the inherent fa…
▽ More
Image Dehazing aims to remove atmospheric fog or haze from an image. Although the Dehazing models have evolved a lot in recent years, few have precisely tackled the problem of High-Resolution hazy images. For this kind of image, the model needs to work on a downscaled version of the image or on cropped patches from it. In both cases, the accuracy will drop. This is primarily due to the inherent failure to combine global and local features when the image size increases. The Dehazing model requires global features to understand the general scene peculiarities and the local features to work better with fine and pixel details. In this study, we propose the Streamlined Global and Local Features Combinator (SGLC) to solve these issues and to optimize the application of any Dehazing model to High-Resolution images. The SGLC contains two successive blocks. The first is the Global Features Generator (GFG) which generates the first version of the Dehazed image containing strong global features. The second block is the Local Features Enhancer (LFE) which improves the local feature details inside the previously generated image. When tested on the Uformer architecture for Dehazing, SGLC increased the PSNR metric by a significant margin. Any other model can be incorporated inside the SGLC process to improve its efficiency on High-Resolution input data.
△ Less
Submitted 26 April, 2023;
originally announced April 2023.
-
Anatomically aware dual-hop learning for pulmonary embolism detection in CT pulmonary angiograms
Authors:
Florin Condrea,
Saikiran Rapaka,
Lucian Itu,
Puneet Sharma,
Jonathan Sperl,
A Mohamed Ali,
Marius Leordeanu
Abstract:
Pulmonary Embolisms (PE) represent a leading cause of cardiovascular death. While medical imaging, through computed tomographic pulmonary angiography (CTPA), represents the gold standard for PE diagnosis, it is still susceptible to misdiagnosis or significant diagnosis delays, which may be fatal for critical cases. Despite the recently demonstrated power of deep learning to bring a significant boo…
▽ More
Pulmonary Embolisms (PE) represent a leading cause of cardiovascular death. While medical imaging, through computed tomographic pulmonary angiography (CTPA), represents the gold standard for PE diagnosis, it is still susceptible to misdiagnosis or significant diagnosis delays, which may be fatal for critical cases. Despite the recently demonstrated power of deep learning to bring a significant boost in performance in a wide range of medical imaging tasks, there are still very few published researches on automatic pulmonary embolism detection. Herein we introduce a deep learning based approach, which efficiently combines computer vision and deep neural networks for pulmonary embolism detection in CTPA. Our method features novel improvements along three orthogonal axes: 1) automatic detection of anatomical structures; 2) anatomical aware pretraining, and 3) a dual-hop deep neural net for PE detection. We obtain state-of-the-art results on the publicly available multicenter large-scale RSNA dataset.
△ Less
Submitted 17 May, 2024; v1 submitted 30 March, 2023;
originally announced March 2023.
-
A Deep-Learning Usability Expansion Model of Ocean Observations
Authors:
Ali Muhamed Ali,
Hanqi Zhuang,
Yu Huang,
Ali K. Ibrahim,
Ali Salem Altaher,
Laurent Chérubin
Abstract:
Today's ocean numerical prediction skills depend on the availability of in-situ and remote ocean observations at the time of the predictions only. Because observations are scarce and discontinuous in time and space, numerical models are often unable to accurately model and predict real ocean dynamics, leading to a lack of fulfillment of a range of services that require reliable predictions at vari…
▽ More
Today's ocean numerical prediction skills depend on the availability of in-situ and remote ocean observations at the time of the predictions only. Because observations are scarce and discontinuous in time and space, numerical models are often unable to accurately model and predict real ocean dynamics, leading to a lack of fulfillment of a range of services that require reliable predictions at various temporal and spatial scales. The process of constraining free numerical models with observations is known as data assimilation. The primary objective is to minimize the misfit of model states with the observations while respecting the rules of physics. The caveat of this approach is that measurements are used only once, at the time of the prediction. The information contained in the history of the measurements and its role in the determinism of the prediction is, therefore, not accounted for. Consequently, historical measurement cannot be used in real-time forecasting systems. The research presented in this paper provides a novel approach rooted in artificial intelligence to expand the usability of observations made before the time of the prediction. Our approach is based on the re-purpose of an existing deep learning model, called U-Net, designed specifically for image segmentation analysis in the biomedical field. U-Net is used here to create a Transform Model that retains the temporal and spatial evolution of the differences between model and observations to produce a correction in the form of regression weights that evolves spatially and temporally with the model both forward and backward in time, beyond the observation period. Using virtual observations, we show that the usability of the observation can be extended up to a one year prior or post observations.
△ Less
Submitted 3 June, 2022;
originally announced June 2022.
-
Assembly development for the Simons Observatory focal plane readout module
Authors:
Erin Healy,
Aamir M. Ali,
Kam Arnold,
Jason E. Austermann,
James A. Beall,
Sarah Marie Bruno,
Steve K. Choi,
Jake Connors,
Nicholas F. Cothar,
Bradley Dober,
Shannon M. Duff,
Nicholas Galitzki,
Gene Hilton,
Shuay-Pwu Patty Ho,
Johannes Hubmayr,
Bradley R. Johnson,
Yaqiong Li,
Michael J. Link,
Tammy J. Lucas,
Heather McCarrick,
Michael D. Niemack,
Maximiliano Silva-Feaver,
Rita F. Sonka,
Suzanne Staggs,
Eve M. Vavagiakis
, et al. (6 additional authors not shown)
Abstract:
The Simons Observatory (SO) is a suite of instruments sensitive to temperature and polarization of the cosmic microwave background (CMB) to be located at Cerro Toco in the Atacama Desert in Chile. Five telescopes, one large aperture telescope and four small aperture telescopes, will host roughly 70,000 highly multiplexed transition edge sensor (TES) detectors operated at 100 mK. Each SO focal plan…
▽ More
The Simons Observatory (SO) is a suite of instruments sensitive to temperature and polarization of the cosmic microwave background (CMB) to be located at Cerro Toco in the Atacama Desert in Chile. Five telescopes, one large aperture telescope and four small aperture telescopes, will host roughly 70,000 highly multiplexed transition edge sensor (TES) detectors operated at 100 mK. Each SO focal plane module (UFM) couples 1,764 TESes to microwave resonators in a microwave multiplexing (uMux) readout circuit. Before detector integration, the 100 mK uMux components are packaged into multiplexing modules (UMMs), which are independently validated to ensure they meet SO performance specifications. Here we present the assembly developments of these UMM readout packages for mid frequency (90/150 GHz) and ultra high frequency (220/280 GHz) UFMs.
△ Less
Submitted 25 July, 2022; v1 submitted 12 April, 2022;
originally announced April 2022.
-
Explainable Medical Image Segmentation via Generative Adversarial Networks and Layer-wise Relevance Propagation
Authors:
Awadelrahman M. A. Ahmed,
Leen A. M. Ali
Abstract:
This paper contributes to automating medical image segmentation by proposing generative adversarial network-based models to segment both polyps and instruments in endoscopy images. A major contribution of this work is to provide explanations for the predictions using a layer-wise relevance propagation approach designating which input image pixels are relevant to the predictions and to what extent.…
▽ More
This paper contributes to automating medical image segmentation by proposing generative adversarial network-based models to segment both polyps and instruments in endoscopy images. A major contribution of this work is to provide explanations for the predictions using a layer-wise relevance propagation approach designating which input image pixels are relevant to the predictions and to what extent. On the polyp segmentation task, the models achieved 0.84 of accuracy and 0.46 on Jaccard index. On the instrument segmentation task, the models achieved 0.96 of accuracy and 0.70 on Jaccard index. The code is available at https://github.com/Awadelrahman/MedAI.
△ Less
Submitted 2 November, 2021;
originally announced November 2021.
-
Physics-Coupled Spatio-Temporal Active Learning for Dynamical Systems
Authors:
Yu Huang,
Yufei Tang,
Xingquan Zhu,
Min Shi,
Ali Muhamed Ali,
Hanqi Zhuang,
Laurent Cherubin
Abstract:
Spatio-temporal forecasting is of great importance in a wide range of dynamical systems applications from atmospheric science, to recent COVID-19 spread modeling. These applications rely on accurate predictions of spatio-temporal structured data reflecting real-world phenomena. A stunning characteristic is that the dynamical system is not only driven by some physics laws but also impacted by the l…
▽ More
Spatio-temporal forecasting is of great importance in a wide range of dynamical systems applications from atmospheric science, to recent COVID-19 spread modeling. These applications rely on accurate predictions of spatio-temporal structured data reflecting real-world phenomena. A stunning characteristic is that the dynamical system is not only driven by some physics laws but also impacted by the localized factor in spatial and temporal regions. One of the major challenges is to infer the underlying causes, which generate the perceived data stream and propagate the involved causal dynamics through the distributed observing units. Another challenge is that the success of machine learning based predictive models requires massive annotated data for model training. However, the acquisition of high-quality annotated data is objectively manual and tedious as it needs a considerable amount of human intervention, making it infeasible in fields that require high levels of expertise. To tackle these challenges, we advocate a spatio-temporal physics-coupled neural networks (ST-PCNN) model to learn the underlying physics of the dynamical system and further couple the learned physics to assist the learning of the recurring dynamics. To deal with data-acquisition constraints, an active learning mechanism with Kriging for actively acquiring the most informative data is proposed for ST-PCNN training in a partially observable environment. Our experiments on both synthetic and real-world datasets exhibit that the proposed ST-PCNN with active learning converges to near optimal accuracy with substantially fewer instances.
△ Less
Submitted 11 August, 2021;
originally announced August 2021.
-
Parallel Algorithms for Densest Subgraph Discovery Using Shared Memory Model
Authors:
B. D. M. De Zoysa,
Y. A. M. M. A. Ali,
M. D. I. Maduranga,
Indika Perera,
Saliya Ekanayake,
Anil Vullikanti
Abstract:
The problem of finding dense components of a graph is a widely explored area in data analysis, with diverse applications in fields and branches of study including community mining, spam detection, computer security and bioinformatics. This research project explores previously available algorithms in order to study them and identify potential modifications that could result in an improved version w…
▽ More
The problem of finding dense components of a graph is a widely explored area in data analysis, with diverse applications in fields and branches of study including community mining, spam detection, computer security and bioinformatics. This research project explores previously available algorithms in order to study them and identify potential modifications that could result in an improved version with considerable performance and efficiency leap. Furthermore, efforts were also steered towards devising a novel algorithm for the problem of densest subgraph discovery. This paper presents an improved implementation of a widely used densest subgraph discovery algorithm and a novel parallel algorithm which produces better results than a 2-approximation.
△ Less
Submitted 27 February, 2021;
originally announced March 2021.
-
The Integration and Testing Program for the Simons Observatory Large Aperture Telescope Optics Tubes
Authors:
Kathleen Harrington,
Carlos Sierra,
Grace Chesmore,
Shreya Sutariya,
Aamir M. Ali,
Steve K. Choi,
Nicholas F. Cothard,
Simon Dicker,
Nicholas Galitzki,
Shuay-Pwu Patty Ho,
Anna M. Kofman,
Brian J. Koopman,
Jack Lashner,
Jeff McMahon,
Michael D. Niemack,
John Orlowski-Scherer,
Joseph Seibert,
Max Silva-Feaver,
Eve M. Vavagiakis,
Zhilei Xu,
Ningfeng Zhu
Abstract:
The Simons Observatory (SO) will be a cosmic microwave background (CMB) survey experiment with three small-aperture telescopes and one large-aperture telescope, which will observe from the Atacama Desert in Chile. In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure…
▽ More
The Simons Observatory (SO) will be a cosmic microwave background (CMB) survey experiment with three small-aperture telescopes and one large-aperture telescope, which will observe from the Atacama Desert in Chile. In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain numerous cosmological quantities, as outlined in The Simons Observatory Collaboration et al. (2019). The 6~m Large Aperture Telescope (LAT), which will target the smaller angular scales of the CMB, utilizes a cryogenic receiver (LATR) designed to house up to 13 individual optics tubes. Each optics tube is comprised of three silicon lenses, IR blocking filters, and three dual-polarization, dichroic TES detector wafers. The scientific objectives of the SO project require these optics tubes to achieve high-throughput optical performance while maintaining exquisite control of systematic effects. We describe the integration and testing program for the SO LATR optics tubes that will verify the design and assembly of the optics tubes before they are shipped to the SO site and installed in the LATR cryostat. The program includes a quick turn-around test cryostat that is used to cool single optics tubes and validate the cryogenic performance and detector readout assembly. We discuss the optical design specifications the optics tubes must meet to be deployed on sky and the suite of optical test equipment that is prepared to measure these requirements.
△ Less
Submitted 3 February, 2021;
originally announced February 2021.
-
Simons Observatory Small Aperture Telescope overview
Authors:
Kenji Kiuchi,
Shunsuke Adachi,
Aamir M. Ali,
Kam Arnold,
Peter Ashton,
Jason E. Austermann,
Andrew Bazako,
James A. Beall,
Yuji Chinone,
Gabriele Coppi,
Kevin D. Crowley,
Kevin T. Crowley,
Simon Dicker,
Bradley Dober,
Shannon M. Duff,
Giulio Fabbian,
Nicholas Galitzki,
Joseph E. Golec,
Jon E. Gudmundsson,
Kathleen Harrington,
Masaya Hasegawa,
Makoto Hattori,
Charles A. Hill,
Shuay-Pwu Patty Ho,
Johannes Hubmayr
, et al. (29 additional authors not shown)
Abstract:
The Simons Observatory (SO) is a cosmic microwave background (CMB) experiment from the Atacama Desert in Chile comprising three small-aperture telescopes (SATs) and one large-aperture telescope (LAT). In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain…
▽ More
The Simons Observatory (SO) is a cosmic microwave background (CMB) experiment from the Atacama Desert in Chile comprising three small-aperture telescopes (SATs) and one large-aperture telescope (LAT). In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain numerous cosmological quantities. In this work, we focus on the SATs which are optimized to search for primordial gravitational waves that are detected as parity-odd polarization patterns called a B-modes on degree scales in the CMB. Each SAT employs a single optics tube with TES arrays operating at 100 mK. The high throughput optics system has a 42 cm aperture and a 35-degree field of view coupled to a 36 cm diameter focal plane. The optics consist of three metamaterial anti-re ection coated silicon lenses. Cryogenic ring baffles with engineered blackbody absorbers are installed in the optics tube to minimize the stray light. The entire optics tube is cooled to 1 K. A cryogenic continuously rotating half-wave plate near the sky side of the aperture stop helps to minimize the effect of atmospheric uctuations. The telescope warm baffling consists of a forebaffle, an elevation stage mounted co-moving shield, and a fixed ground shield that together control the far side-lobes and mitigates ground-synchronous systematics. We present the status of the SAT development.
△ Less
Submitted 28 January, 2021;
originally announced January 2021.
-
Design and Fabrication of Metamaterial Anti-Reflection Coatings for the Simons Observatory
Authors:
Joseph E. Golec,
Jeffrey J. McMahon,
Aamir M. Ali,
Grace E. Chesmore,
Leah Cooperrider,
Simon Dicker,
Nicholas Galitzki,
Kathleen Harrington,
Rebecca Jackson,
Benjamin Westbrook,
Edward J. Wollack,
Zhilei Xu,
Ningfeng Zhu
Abstract:
The Simons Observatory (SO) will be a cosmic microwave background (CMB) survey experiment with three small-aperture telescopes and one large-aperture telescope, which will observe from the Atacama Desert in Chile. In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure…
▽ More
The Simons Observatory (SO) will be a cosmic microwave background (CMB) survey experiment with three small-aperture telescopes and one large-aperture telescope, which will observe from the Atacama Desert in Chile. In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain numerous cosmological quantities, as outlined in The Simons Observatory Collaboration et al. (2019). These telescopes require 33 highly transparent, large aperture, refracting optics. To this end, we developed mechanically robust, highly efficient, metamaterial anti-reflection (AR) coatings with octave bandwidth coverage for silicon optics up to 46 cm in diameter for the 22-55, 75-165, and 190-310 GHz bands. We detail the design, the manufacturing approach to fabricate the SO lenses, their performance, and possible extensions of metamaterial AR coatings to optical elements made of harder materials such as alumina.
△ Less
Submitted 2 October, 2021; v1 submitted 25 January, 2021;
originally announced January 2021.
-
Comparing complex impedance and bias step measurements of Simons Observatory transition edge sensors
Authors:
Nicholas F. Cothard,
Aamir M. Ali,
Jason E. Austermann,
Steve K. Choi,
Kevin T. Crowley,
Bradley J. Dober,
Cody J. Duell,
Shannon M. Duff,
Patricio Gallardo,
Gene C. Hilton,
Shuay-Pwu Patty Ho,
Johannes Hubmayr,
Michael J. Link,
Michael D. Niemack,
Rita F. Sonka,
Suzanne T. Staggs,
Eve M. Vavagiakis,
Edward J. Wollack,
Zhilei Xu
Abstract:
The Simons Observatory (SO) will perform ground-based observations of the cosmic microwave background (CMB) with several small and large aperture telescopes, each outfitted with thousands to tens of thousands of superconducting aluminum manganese (AlMn) transition-edge sensor bolometers (TESs). In-situ characterization of TES responsivities and effective time constants will be required multiple ti…
▽ More
The Simons Observatory (SO) will perform ground-based observations of the cosmic microwave background (CMB) with several small and large aperture telescopes, each outfitted with thousands to tens of thousands of superconducting aluminum manganese (AlMn) transition-edge sensor bolometers (TESs). In-situ characterization of TES responsivities and effective time constants will be required multiple times each observing-day for calibrating time-streams during CMB map-making. Effective time constants are typically estimated in the field by briefly applying small amplitude square-waves on top of the TES DC biases, and fitting exponential decays in the bolometer response. These so-called "bias step" measurements can be rapidly implemented across entire arrays and therefore are attractive because they take up little observing time. However, individual detector complex impedance measurements, while too slow to implement during observations, can provide a fuller picture of the TES model and a better understanding of its temporal response. Here, we present the results of dark TES characterization of many prototype SO bolometers and compare the effective thermal time constants measured via bias steps to those derived from complex impedance data.
△ Less
Submitted 17 December, 2020; v1 submitted 15 December, 2020;
originally announced December 2020.
-
The Simons Observatory: the Large Aperture Telescope Receiver (LATR) Integration and Validation Results
Authors:
Zhilei Xu,
Tanay Bhandarkar,
Gabriele Coppi,
Anna M. Kofman,
John L. Orlowski-Scherer,
Ningfeng Zhu,
Aamir M. Ali,
Kam Arnold,
Jason E. Austermann,
Steve K. Choi,
Jake Connors,
Nicholas F. Cothard,
Mark Devlin,
Simon Dicker,
Bradley Dober,
Shannon M. Duff,
Giulio Fabbian,
Nicholas Galitzki,
Saianeesh K. Haridas,
Kathleen Harrington,
Erin Healy,
Shuay-Pwu Patty Ho,
Johannes Hubmayr,
Jeffrey Iuliano,
Jack Lashner
, et al. (20 additional authors not shown)
Abstract:
The Simons Observatory (SO) will observe the cosmic microwave background (CMB) from Cerro Toco in the Atacama Desert of Chile. The observatory consists of three 0.5 m Small Aperture Telescopes (SATs) and one 6 m Large Aperture Telescope (LAT), covering six frequency bands centering around 30, 40, 90, 150, 230, and 280 GHz. The SO observations will transform the understanding of our universe by cha…
▽ More
The Simons Observatory (SO) will observe the cosmic microwave background (CMB) from Cerro Toco in the Atacama Desert of Chile. The observatory consists of three 0.5 m Small Aperture Telescopes (SATs) and one 6 m Large Aperture Telescope (LAT), covering six frequency bands centering around 30, 40, 90, 150, 230, and 280 GHz. The SO observations will transform the understanding of our universe by characterizing the properties of the early universe, measuring the number of relativistic species and the mass of neutrinos, improving our understanding of galaxy evolution, and constraining the properties of cosmic reionization. As a critical instrument, the Large Aperture Telescope Receiver (LATR) is designed to cool $\sim$ 60,000 transition-edge sensors (TES) to $<$ 100 mK on a 1.7 m diameter focal plane. The unprecedented scale of the LATR drives a complex design. In this paper, we will first provide an overview of the LATR design. Integration and validation of the LATR design are discussed in detail, including mechanical strength, optical alignment, and cryogenic performance of the five cryogenic stages (80 K, 40 K, 4 K, 1 K, and 100 mK). We will also discuss the microwave-multiplexing ($μ$Mux) readout system implemented in the LATR and demonstrate the operation of dark prototype TES bolometers. The $μ$Mux readout technology enables one coaxial loop to read out $\mathcal{O}(10^3)$ TES detectors. Its implementation within the LATR serves as a critical validation for the complex RF chain design. The successful validation of the LATR performance is not only a critical milestone within the Simons Observatory, it also provides a valuable reference for other experiments, e.g. CCAT-prime and CMB-S4.
△ Less
Submitted 14 December, 2020;
originally announced December 2020.
-
The Simons Observatory: gain, bandpass and polarization-angle calibration requirements for B-mode searches
Authors:
Maximilian H. Abitbol,
David Alonso,
Sara M. Simon,
Jack Lashner,
Kevin T. Crowley,
Aamir M. Ali,
Susanna Azzoni,
Carlo Baccigalupi,
Darcy Barron,
Michael L. Brown,
Erminia Calabrese,
Julien Carron,
Yuji Chinone,
Jens Chluba,
Gabriele Coppi,
Kevin D. Crowley,
Mark Devlin,
Jo Dunkley,
Josquin Errard,
Valentina Fanfani,
Nicholas Galitzki,
Martina Gerbino,
J. Colin Hill,
Bradley R. Johnson,
Baptiste Jost
, et al. (23 additional authors not shown)
Abstract:
We quantify the calibration requirements for systematic uncertainties for next-generation ground-based observatories targeting the large-angle $B$-mode polarization of the Cosmic Microwave Background, with a focus on the Simons Observatory (SO). We explore uncertainties on gain calibration, bandpass center frequencies, and polarization angles, including the frequency variation of the latter across…
▽ More
We quantify the calibration requirements for systematic uncertainties for next-generation ground-based observatories targeting the large-angle $B$-mode polarization of the Cosmic Microwave Background, with a focus on the Simons Observatory (SO). We explore uncertainties on gain calibration, bandpass center frequencies, and polarization angles, including the frequency variation of the latter across the bandpass. We find that gain calibration and bandpass center frequencies must be known to percent levels or less to avoid biases on the tensor-to-scalar ratio $r$ on the order of $Δr\sim10^{-3}$, in line with previous findings. Polarization angles must be calibrated to the level of a few tenths of a degree, while their frequency variation between the edges of the band must be known to ${\cal O}(10)$ degrees. Given the tightness of these calibration requirements, we explore the level to which residual uncertainties on these systematics would affect the final constraints on $r$ if included in the data model and marginalized over. We find that the additional parameter freedom does not degrade the final constraints on $r$ significantly, broadening the error bar by ${\cal O}(10\%)$ at most. We validate these results by reanalyzing the latest publicly available data from the BICEP2/Keck collaboration within an extended parameter space covering both cosmological, foreground and systematic parameters. Finally, our results are discussed in light of the instrument design and calibration studies carried out within SO.
△ Less
Submitted 15 June, 2021; v1 submitted 4 November, 2020;
originally announced November 2020.
-
The Simons Observatory: Metamaterial Microwave Absorber (MMA) and its Cryogenic Applications
Authors:
Zhilei Xu,
Grace E. Chesmore,
Shunsuke Adachi,
Aamir M. Ali,
Andrew Bazarko,
Gabriele Coppi,
Mark Devlin,
Tom Devlin,
Simon R. Dicker,
Patricio A. Gallardo,
Joseph E. Golec,
Jon E. Gudmundsson,
Kathleen Harrington,
Makoto Hattori,
Anna Kofman,
Kenji Kiuchi,
Akito Kusaka,
Michele Limon,
Frederick Matsuda,
Jeff McMahon,
Federico Nati,
Michael D. Niemack,
Shreya Sutariya,
Aritoki Suzuki,
Grant P. Teply
, et al. (4 additional authors not shown)
Abstract:
Controlling stray light at millimeter wavelengths requires special optical design and selection of absorptive materials that should be compatible with cryogenic operating environments. While a wide selection of absorptive materials exists, these typically exhibit high indices of refraction and reflect/scatter a significant fraction of light before absorption. For many lower index materials such as…
▽ More
Controlling stray light at millimeter wavelengths requires special optical design and selection of absorptive materials that should be compatible with cryogenic operating environments. While a wide selection of absorptive materials exists, these typically exhibit high indices of refraction and reflect/scatter a significant fraction of light before absorption. For many lower index materials such as commercial microwave absorbers, their applications in cryogenic environments are challenging. In this paper, we present a new tool to control stray light: metamaterial microwave absorber tiles. These tiles comprise an outer metamaterial layer that approximates a lossy gradient index anti-reflection coating. They are fabricated via injection molding commercially available carbon-loaded polyurethane (25\% by mass). The injection molding technology enables mass production at low cost. The design of these tiles is presented, along with thermal tests to 1 K. Room temperature optical measurements verify their control of reflectance to less than 1\% up to 65$\circ$ angles of incidence, and control of wide angle scattering below 0.01\%. The dielectric properties of the bulk carbon-loaded material used in the tiles is also measured at different temperatures, confirming that the material maintains similar dielectric properties down to 3 K.
△ Less
Submitted 22 February, 2021; v1 submitted 5 October, 2020;
originally announced October 2020.
-
The Simons Observatory: Modeling Optical Systematics in the Large Aperture Telescope
Authors:
Jon E. Gudmundsson,
Patricio A. Gallardo,
Roberto Puddu,
Simon R. Dicker,
Alexandre E. Adler,
Aamir M. Ali,
Andrew Bazarko,
Grace E. Chesmore,
Gabriele Coppi,
Nicholas F. Cothard,
Nadia Dachlythra,
Mark Devlin,
Rolando Dünner,
Giulio Fabbian,
Nicholas Galitzki,
Joseph E. Golec,
Shuay-Pwu Patty Ho,
Peter C. Hargrave,
Anna M. Kofman,
Adrian T. Lee,
Michele Limon,
Frederick T. Matsuda,
Philip D. Mauskopf,
Kavilan Moodley,
Federico Nati
, et al. (13 additional authors not shown)
Abstract:
We present geometrical and physical optics simulation results for the Simons Observatory Large Aperture Telescope. This work was developed as part of the general design process for the telescope; allowing us to evaluate the impact of various design choices on performance metrics and potential systematic effects. The primary goal of the simulations was to evaluate the final design of the reflectors…
▽ More
We present geometrical and physical optics simulation results for the Simons Observatory Large Aperture Telescope. This work was developed as part of the general design process for the telescope; allowing us to evaluate the impact of various design choices on performance metrics and potential systematic effects. The primary goal of the simulations was to evaluate the final design of the reflectors and the cold optics which are now being built. We describe non-sequential ray tracing used to inform the design of the cold optics, including absorbers internal to each optics tube. We discuss ray tracing simulations of the telescope structure that allow us to determine geometries that minimize detector loading and mitigate spurious near-field effects that have not been resolved by the internal baffling. We also describe physical optics simulations, performed over a range of frequencies and field locations, that produce estimates of monochromatic far field beam patterns which in turn are used to gauge general optical performance. Finally, we describe simulations that shed light on beam sidelobes from panel gap diffraction.
△ Less
Submitted 21 September, 2020;
originally announced September 2020.
-
North Atlantic Right Whales Up-call Detection Using Multimodel Deep Learning
Authors:
Ali K Ibrahim,
Hanqi Zhuang,
Laurent M. Ch'erubin,
Nurgun Erdol,
Gregory O Corry-Crowe,
Ali Muhamed Ali
Abstract:
A new method for North Atlantic Right Whales (NARW) up-call detection using Multimodel Deep Learning (MMDL) is presented in this paper. In this approach, signals from passive acoustic sensors are first converted to spectrogram and scalogram images, which are time-frequency representations of the signals. These images are in turn used to train an MMDL detec-tor, consisting of Convolutional Neural N…
▽ More
A new method for North Atlantic Right Whales (NARW) up-call detection using Multimodel Deep Learning (MMDL) is presented in this paper. In this approach, signals from passive acoustic sensors are first converted to spectrogram and scalogram images, which are time-frequency representations of the signals. These images are in turn used to train an MMDL detec-tor, consisting of Convolutional Neural Networks (CNNs) and Stacked Auto Encoders (SAEs). Our experimental studies revealed that CNNs work better with spectrograms and SAEs with sca-lograms. Therefore in our experimental design, the CNNs are trained by using spectrogram im-ages, and the SAEs are trained by using scalogram images. A fusion mechanism is used to fuse the results from individual neural networks. In this paper, the results obtained from the MMDL detector are compared with those obtained from conventional machine learning algorithms trained with handcraft features. It is shown that the performance of the MMDL detector is sig-nificantly better than those of the representative conventional machine learning methods in terms of up-call detection rate, non-up-call detection rate, and false alarm rate.
△ Less
Submitted 17 May, 2020;
originally announced May 2020.
-
Small Aperture Telescopes for the Simons Observatory
Authors:
Aamir M. Ali,
Shunsuke Adachi,
Kam Arnold,
Peter Ashton,
Andrew Bazarko,
Yuji Chinone,
Gabriele Coppi,
Lance Corbett,
Kevin D Crowley,
Kevin T Crowley,
Mark Devlin,
Simon Dicker,
Shannon Duff,
Chris Ellis,
Nicholas Galitzki,
Neil Goeckner-Wald,
Kathleen Harrington,
Erin Healy,
Charles A Hill,
Shuay-Pwu Patty Ho,
Johannes Hubmayr,
Brian Keating,
Kenji Kiuchi,
Akito Kusaka,
Adrian T Lee
, et al. (27 additional authors not shown)
Abstract:
The Simons Observatory (SO) is an upcoming cosmic microwave background (CMB) experiment located on Cerro Toco, Chile, that will map the microwave sky in temperature and polarization in six frequency bands spanning 27 to 285 GHz. SO will consist of one 6-meter Large Aperture Telescope (LAT) fielding $\sim$30,000 detectors and an array of three 0.42-meter Small Aperture Telescopes (SATs) fielding an…
▽ More
The Simons Observatory (SO) is an upcoming cosmic microwave background (CMB) experiment located on Cerro Toco, Chile, that will map the microwave sky in temperature and polarization in six frequency bands spanning 27 to 285 GHz. SO will consist of one 6-meter Large Aperture Telescope (LAT) fielding $\sim$30,000 detectors and an array of three 0.42-meter Small Aperture Telescopes (SATs) fielding an additional 30,000 detectors. This synergy will allow for the extremely sensitive characterization of the CMB over angular scales ranging from an arcmin to tens of degrees, enabling a wide range of scientific output. Here we focus on the SATs targeting degree angular scales with successive dichroic instruments observing at Mid-Frequency (MF: 93/145 GHz), Ultra-High-Frequency (UHF: 225/285 GHz), and Low-Frequency (LF: 27/39 GHz). The three SATs will be able to map $\sim$10% of the sky to a noise level of 2 $μ$K-arcmin when combining 93 and 145 GHz. The multiple frequency bands will allow the CMB to be separated from galactic foregrounds (primarily synchrotron and dust), with the primary science goal of characterizing the primordial tensor-to-scalar ratio, $r$, at a target level of $σ\left(r\right) \approx 0.003$.
△ Less
Submitted 23 January, 2020; v1 submitted 21 January, 2020;
originally announced January 2020.
-
Using High Frequency Propagation to Calculate Basic Maximum Usable Frequency
Authors:
Israa Abdualqassim Mohammed Ali
Abstract:
A comparison between observed (obs.) digital ionospheric sounding data and predicted (pre.) using International Reference Ionosphere (IRI) model for critical frequency (foF2) and Basic Maximum Usable Frequency (BMUF) of ionospheric F2-Layer has been made. A mid-latitude region selected for this research work by using data from station Wakkanai ($45.38^{o} N$, $141.66^{o} E$). This study included 1…
▽ More
A comparison between observed (obs.) digital ionospheric sounding data and predicted (pre.) using International Reference Ionosphere (IRI) model for critical frequency (foF2) and Basic Maximum Usable Frequency (BMUF) of ionospheric F2-Layer has been made. A mid-latitude region selected for this research work by using data from station Wakkanai ($45.38^{o} N$, $141.66^{o} E$). This study included 12 monthly median data from year (2001, $R_{12}=111$) selected for high Sunspot number (SSN) and years for low SSN (2004, $R_{12}=44$) and (2005, $R_{12}=29$). Frequency parameters foF2 reveals that there is a good correlation between observed and predicted except for January of years 2001 and 2004, and BMUF revealed that there is a good correlation between observed and predicted for years of low SSN and all months except in month 1, 9 and 12 of year 2004, for year 2001 of high SSN there is a bad correlation. A correction factor as a function of time used from fitting technique to correct the predicted value with observed value of BMUF for year 2001.
△ Less
Submitted 5 August, 2019;
originally announced August 2019.
-
Dark Matter in the Central Region of the Spiral Galaxy NGC 4321
Authors:
Israa Abdulqasim Mohammed Ali,
Chorng-Yuan Hwang,
Zamri Zainal Abidin
Abstract:
We present our results of 12 CO(1-0) transition in the central region of NGC 4321 using the Atacama Large Millimeter and Sub-millimeter Array (ALMA). We found an unaccounted mass of $2.3 \times 10^9 M_{\odot}$ within the central 0.7 kpc of this galaxy. The expected mass of the supermassive black hole (SMBH) in this galaxy is much smaller than the unaccounted mass. The invisible mass is likely caus…
▽ More
We present our results of 12 CO(1-0) transition in the central region of NGC 4321 using the Atacama Large Millimeter and Sub-millimeter Array (ALMA). We found an unaccounted mass of $2.3 \times 10^9 M_{\odot}$ within the central 0.7 kpc of this galaxy. The expected mass of the supermassive black hole (SMBH) in this galaxy is much smaller than the unaccounted mass. The invisible mass is likely caused by dark matter in the central region of the galaxy, indicating a cuspy dark matter profile. We also investigated the Modified Newtonian Dynamics (MOND) as an alternative mechanism to explain the invisible mass. We noted that at the radius of 0.7 kpc of the galaxy, the acceleration is about $1.04 \times 10^-7~cm~s^-2$, which is much larger than the critical acceleration $a_{0} \sim 1.2 \times 10^-8 ~cm~s^-2$ in the MOND theory, suggesting that theory might not be able explain the unseen mass problem in central region of this galaxy.
△ Less
Submitted 13 December, 2018;
originally announced December 2018.
-
Dark Matter in the Central Region of NGC 3256
Authors:
Israa Abdulqasim Mohammed Ali,
Chorng-Yuan Hwang,
Zamri Zainal Abidin,
Adele Laurie Plunkett
Abstract:
We investigated the central mass distribution of the luminous infrared galaxy NGC 3256 at a distance of 35 Mpc by using CO(1-0) observations of the Atacama Large Millimeter and sub-millimeter Array (ALMA) and near-IR data of the Two Micron Sky Survey (2MASS). We found that there is a huge amount of invisible dynamical mass ($4.84 \times 10^{10} M_{\odot}$) in the central region of the galaxy. The…
▽ More
We investigated the central mass distribution of the luminous infrared galaxy NGC 3256 at a distance of 35 Mpc by using CO(1-0) observations of the Atacama Large Millimeter and sub-millimeter Array (ALMA) and near-IR data of the Two Micron Sky Survey (2MASS). We found that there is a huge amount of invisible dynamical mass ($4.84 \times 10^{10} M_{\odot}$) in the central region of the galaxy. The invisible mass is likely caused by some dark matter, which might have a cuspy dark matter profile. We note that this dark matter is difficult to explain with the conventional Modified Newtonian Dynamics (MOND) model, which is only applicable at a low acceleration regime, whereas the acceleration at the central region of the galaxy is relatively strong. Therefore, this discovery might pose a challenge to the conventional MOND models.
△ Less
Submitted 30 September, 2018;
originally announced October 2018.
-
SiAl Alloy Feedhorn Arrays: Material Properties, Feedhorn Design, and Astrophysical Applications
Authors:
Aamir M. Ali,
Thomas Essinger-Hileman,
Tobias Marriage,
John W. Appel,
Charles L. Bennnett,
Matthew Berkeley,
Berhanu Bulcha,
Sumit Dahal,
Kevin L. Denis,
Karwan Rostem,
Kongpop U-Yen,
Edward J. Wollack,
Lingzhen Zeng
Abstract:
We present here a study of the use of the SiAl alloy CE7 for the packaging of silicon devices at cryogenic temperatures. We report on the development of baseplates and feedhorn arrays for millimeter wave bolometric detectors for astrophysics. Existing interfaces to such detectors are typically made either of metals, which are easy to machine but mismatched to the thermal contraction profile of Si…
▽ More
We present here a study of the use of the SiAl alloy CE7 for the packaging of silicon devices at cryogenic temperatures. We report on the development of baseplates and feedhorn arrays for millimeter wave bolometric detectors for astrophysics. Existing interfaces to such detectors are typically made either of metals, which are easy to machine but mismatched to the thermal contraction profile of Si devices, or of silicon, which avoids the mismatch but is difficult to directly machine. CE7 exhibits properties of both Si and Al, which makes it uniquely well suited for this application.
We measure CE7 to a) superconduct below a critical transition temperature, $T_c$, $\sim$ 1.2 K b) have a thermal contraction profile much closer to Si than metals, which enables simple mating, and c) have a low thermal conductivity which can be improved by Au-plating. Our investigations also demonstrate that CE7 can be machined well enough to fabricate small structures, such as \#0-80 threaded holes, to tight tolerances ($\sim$ 25 $μ$m) in contrast with pure silicon and similar substrates. We have fabricated CE7 baseplates being deployed in the 93 GHz polarimeteric focal planes used in the Cosmology Large Angular Scale Surveyor (CLASS). We also report on the development of smooth-walled feedhorn arrays made of CE7 that will be used in a focal plane of dichroic 150/220 GHz detectors for the CLASS High-Frequency Camera.
△ Less
Submitted 9 July, 2018;
originally announced July 2018.
-
User Interface (UI) Design Issues for the Multilingual Users: A Case Study
Authors:
Mahdi H. Miraz,
Peter Excell,
and Maaruf Ali
Abstract:
A multitude of web and desktop applications are now widely available in diverse human languages. This paper explores the design issues that are specifically relevant for multilingual users. It reports on the continued studies of Information System (IS) issues and users' behaviour across cross-cultural and transnational boundaries. Taking the BBC website as a model that is internationally recognise…
▽ More
A multitude of web and desktop applications are now widely available in diverse human languages. This paper explores the design issues that are specifically relevant for multilingual users. It reports on the continued studies of Information System (IS) issues and users' behaviour across cross-cultural and transnational boundaries. Taking the BBC website as a model that is internationally recognised, usability tests were conducted to compare different versions of the website. The dependant variables derived from the questionnaire were analysed (via descriptive statistics) to elucidate the multilingual UI design issues. Using Principal Component Analysis (PCA), five de-correlated variables were identified which were then used for hypotheses tests. A modified version of Herzberg's Hygiene-motivational Theory about the Workplace was applied to assess the components used in the website. Overall, it was concluded that the English versions of the website gave superior usability results and this implies the need for deeper study of the problems in usability of the translated versions.
△ Less
Submitted 6 September, 2017;
originally announced September 2017.
-
Interacting Double Coset Magnons
Authors:
Abdelhamid Mohamed Adam Ali,
Robert de Mello Koch,
Nirina Hasina Tahiridimbisoa,
Augustine Larweh Mahu
Abstract:
We consider the anomalous dimensions of restricted Schur polynomials constructed using n~O(N) complex adjoint scalars Z and m complex adjoint scalars Y. We fix m<<n so that our operators are almost half BPS. At leading order in m/n this system corresponds to a dilute gas of m free magnons. Adding the first correction of order m/n to the anomalous dimension, which arises at two loops, we find non-z…
▽ More
We consider the anomalous dimensions of restricted Schur polynomials constructed using n~O(N) complex adjoint scalars Z and m complex adjoint scalars Y. We fix m<<n so that our operators are almost half BPS. At leading order in m/n this system corresponds to a dilute gas of m free magnons. Adding the first correction of order m/n to the anomalous dimension, which arises at two loops, we find non-zero magnon interactions. The form of this new operator mixing is studied in detail for a system of two giant gravitons with four strings attached.
△ Less
Submitted 15 December, 2015;
originally announced December 2015.