-
Phase mixing of propagating Alfv{é}n waves in a single-fluid partially ionized solar plasma
Authors:
Max McMurdo,
Istvan Ballai,
Gary Verth,
Abdulaziz Alharbi,
Viktor Fedun
Abstract:
Phase mixing of Alfven waves is one of the most promising mechanisms for heating of the solar atmosphere. The dam** of waves in this case requires small transversal scales, relative to the magnetic field direction. Here this requirement is achieved by considering a transversal inhomogeneity in the equilibrium plasma density profile. Using a single fluid approximation of a partially ionized chrom…
▽ More
Phase mixing of Alfven waves is one of the most promising mechanisms for heating of the solar atmosphere. The dam** of waves in this case requires small transversal scales, relative to the magnetic field direction. Here this requirement is achieved by considering a transversal inhomogeneity in the equilibrium plasma density profile. Using a single fluid approximation of a partially ionized chromospheric plasma we study the effectiveness of the dam** of phase mixed shear Alfven waves and investigate the effect of varying the ionization degree on the dissipation of waves. Our results show that the dissipation length of shear Alfven waves strongly depends on the ionization degree of the plasma, but more importantly, in a partially ionized plasma, the dam** length of shear Alfven waves is several orders of magnitude shorter than in the case of a fully ionized plasma, providing evidence that phase mixing could be a large contributor to heating the solar chromosphere. The effectiveness of phase mixing is investigated for various ionization degrees, ranging from very weakly to very strongly ionized plasmas. Our results show that phase mixed propagating Alfven waves in a partially ionized plasma with ionization degrees in the range 0.518 to 0.657, corresponding to heights of 1916 to 2150 km above the solar surface, can provide sufficient heating to balance chromospheric radiative losses in the quiet Sun.
△ Less
Submitted 6 November, 2023;
originally announced November 2023.
-
A critical perspective for emerging ultra-thin solar cells with ultra-high power-per-weight outputs
Authors:
Apostolos Panagiotopoulos,
Temur Maksudov,
George Kakavelakis,
George Perrakis,
Essa A. Alharbi,
Dimitar Kutsarov,
Furkan H. Isikgor,
Salman Alfihed,
Konstantinos Petridis,
Maria Kafesaki,
S. Ravi P. Silva,
Thomas D. Anthopoulos,
Michael Graetzel
Abstract:
Ultrathin, solution-processed emerging solar cells with high power-per-weight (PPW) outputs demonstrate unique potential for applications where low weight, high power output, and flexibility are indispensable. The following perspective explores the literature of emerging PVs and highlights the maximum reported PPW values of Perovskite Solar Cells (PSCs) 29.4 W/g, Organic Solar Cells (OSCs) 32.07 W…
▽ More
Ultrathin, solution-processed emerging solar cells with high power-per-weight (PPW) outputs demonstrate unique potential for applications where low weight, high power output, and flexibility are indispensable. The following perspective explores the literature of emerging PVs and highlights the maximum reported PPW values of Perovskite Solar Cells (PSCs) 29.4 W/g, Organic Solar Cells (OSCs) 32.07 W/g and Quantum Dot Solar Cells (QDSC) 15.02 W/g, respectively. The record PPW values of OSCs and PSCs are approximately one order of magnitude higher compared to their inorganic ultrathin solar cells counterparts (approx. 3.2 W/g for CIGS and a-Si). This consists emerging PVs, very attractive for a variety of applications where the PPW is the key parameter. In particular, both OSCs and PSCs can be implemented in different scenarios of applications (indoor and biocompatible applications for OSCs and outdoor and high-energy radiation conversion conditions for the PSCs) due to their unique optoelectronic and physiochemical properties. Finally, our theoretical optical and electrical simulation and optimization study for the most promising and well-suited PV technologies, showed an impressive maximum realistic theoretical PPW limit of 74.3 and 93.7 W/g for PSCs and OSCs, respectively. Our finding shows that the literature PSCs and OSCs towards high PPW outputs, is not quite close to the theoretical maximum and thus more work needs to be done to further increase the PPW output of these promising PV technologies.
△ Less
Submitted 25 July, 2023;
originally announced July 2023.
-
A First-Order Mean-Field Game on a Bounded Domain with Mixed Boundary Conditions
Authors:
Abdulrahman M. Alharbi,
Yuri Ashrafyan,
Diogo Gomes
Abstract:
This paper presents a novel first-order mean-field game model that includes a prescribed incoming flow of agents in part of the boundary (Neumann boundary condition) and exit costs in the remaining portion (Dirichlet boundary condition). Our model is described by a system of a Hamilton-Jacobi equation and a stationary transport (Fokker-Planck) equation equipped with mixed and contact-set boundary…
▽ More
This paper presents a novel first-order mean-field game model that includes a prescribed incoming flow of agents in part of the boundary (Neumann boundary condition) and exit costs in the remaining portion (Dirichlet boundary condition). Our model is described by a system of a Hamilton-Jacobi equation and a stationary transport (Fokker-Planck) equation equipped with mixed and contact-set boundary conditions. We provide a rigorous variational formulation for the system, allowing us to prove the existence of solutions using variational techniques. Moreover, we establish the uniqueness of the gradient of the value function, which is a key result for the analysis of the model. In addition to the theoretical results, we present several examples that illustrate the presence of regions with vanishing density.
△ Less
Submitted 25 May, 2023;
originally announced May 2023.
-
Coronal Heating as Determined by the Solar Flare Frequency Distribution Obtained by Aggregating Case Studies
Authors:
James Paul Mason,
Alexandra Werth,
Colin G. West,
Allison A. Youngblood,
Donald L. Woodraska,
Courtney Peck,
Kevin Lacjak,
Florian G. Frick,
Moutamen Gabir,
Reema A. Alsinan,
Thomas Jacobsen,
Mohammad Alrubaie,
Kayla M. Chizmar,
Benjamin P. Lau,
Lizbeth Montoya Dominguez,
David Price,
Dylan R. Butler,
Connor J. Biron,
Nikita Feoktistov,
Kai Dewey,
N. E. Loomis,
Michal Bodzianowski,
Connor Kuybus,
Henry Dietrick,
Aubrey M. Wolfe
, et al. (977 additional authors not shown)
Abstract:
Flare frequency distributions represent a key approach to addressing one of the largest problems in solar and stellar physics: determining the mechanism that counter-intuitively heats coronae to temperatures that are orders of magnitude hotter than the corresponding photospheres. It is widely accepted that the magnetic field is responsible for the heating, but there are two competing mechanisms th…
▽ More
Flare frequency distributions represent a key approach to addressing one of the largest problems in solar and stellar physics: determining the mechanism that counter-intuitively heats coronae to temperatures that are orders of magnitude hotter than the corresponding photospheres. It is widely accepted that the magnetic field is responsible for the heating, but there are two competing mechanisms that could explain it: nanoflares or Alfvén waves. To date, neither can be directly observed. Nanoflares are, by definition, extremely small, but their aggregate energy release could represent a substantial heating mechanism, presuming they are sufficiently abundant. One way to test this presumption is via the flare frequency distribution, which describes how often flares of various energies occur. If the slope of the power law fitting the flare frequency distribution is above a critical threshold, $α=2$ as established in prior literature, then there should be a sufficient abundance of nanoflares to explain coronal heating. We performed $>$600 case studies of solar flares, made possible by an unprecedented number of data analysts via three semesters of an undergraduate physics laboratory course. This allowed us to include two crucial, but nontrivial, analysis methods: pre-flare baseline subtraction and computation of the flare energy, which requires determining flare start and stop times. We aggregated the results of these analyses into a statistical study to determine that $α= 1.63 \pm 0.03$. This is below the critical threshold, suggesting that Alfvén waves are an important driver of coronal heating.
△ Less
Submitted 9 May, 2023;
originally announced May 2023.
-
Surface passivation of FAPbI3-rich perovskite with caesium iodide outperforms bulk incorporation
Authors:
Thomas P. Baumeler,
Essa A. Alharbi,
George Kakavelakis,
George C. Fish,
Mubarak T. Aldosari,
Miqad S. Albishi,
Lukas Pfeifer,
Brian I. Carlsen,
Jun-Ho Yum,
Abdullah S. Alharbi,
Mounir D. Mensi,
**g Gao,
Felix T. Eickemeyer,
Kevin Sivula,
Jacques-Edouard Moser,
Shaik M. Zakeeruddin,
Michael Graetzel
Abstract:
Metal halide perovskites (MHPs) have shown an incredible rise in efficiency, reaching as high as 25.7%, which now competes with traditional photovoltaic technologies. Herein, we excluded CsX and RbX, the most commonly used cations to stabilize FAPbI3, from the bulk of perovskite thin films and applied them on the surface, as passivation agents. Extensive device optimization led to a power conversi…
▽ More
Metal halide perovskites (MHPs) have shown an incredible rise in efficiency, reaching as high as 25.7%, which now competes with traditional photovoltaic technologies. Herein, we excluded CsX and RbX, the most commonly used cations to stabilize FAPbI3, from the bulk of perovskite thin films and applied them on the surface, as passivation agents. Extensive device optimization led to a power conversion efficiency (PCE) of 24.1% with a high fill factor (FF) of 82.2% upon passivation with CsI. We investigated in-depth the effect of CsI passivation on structural and optoelectronic properties using X-ray diffraction (XRD), angle resolved X-ray photoelectron spectroscopy (ARXPS), Kelvin Probe Force (KPFM) microscopy, time-resolved photoluminescence (TRPL), photoluminescence quantum yield (PLQY) and electroabsorption spectroscopy (TREAS). Furthermore, passivated devices exhibit enhanced operational stability, with optimized passivation with CsI leading to a retention of ~90% of initial PCE under 1 Sun illumination with maximum power point tracking for 600 h.
△ Less
Submitted 25 April, 2023;
originally announced April 2023.
-
Site Assessment and Layout Optimization for Rooftop Solar Energy Generation in Worldview-3 Imagery
Authors:
Zeyad Awwad,
Abdulaziz Alharbi,
Abdulelah H. Habib,
Olivier L. de Weck
Abstract:
With the growth of residential rooftop PV adoption in recent decades, the problem of effective layout design has become increasingly important in recent years. Although a number of automated methods have been introduced, these tend to rely on simplifying assumptions and heuristics to improve computational tractability. We demonstrate a fully automated layout design pipeline that attempts to solve…
▽ More
With the growth of residential rooftop PV adoption in recent decades, the problem of effective layout design has become increasingly important in recent years. Although a number of automated methods have been introduced, these tend to rely on simplifying assumptions and heuristics to improve computational tractability. We demonstrate a fully automated layout design pipeline that attempts to solve a more general formulation with greater geometric flexibility that accounts for shading losses. Our approach generates rooftop areas from satellite imagery and uses MINLP optimization to select panel positions, azimuth angles and tilt angles on an individual basis rather than imposing any predefined layouts. Our results demonstrate that shading plays a critical role in automated rooftop PV optimization and significantly changes the resulting layouts. Additionally, they suggest that, although several common heuristics are often effective, they may not be universally suitable due to complications resulting from geometric restrictions and shading losses. Finally, we evaluate a few specific heuristics from the literature and propose a potential new rule of thumb that may help improve rooftop solar energy potential when shading effects are considered.
△ Less
Submitted 28 February, 2023; v1 submitted 7 December, 2022;
originally announced December 2022.
-
Resonance effects in Brunel harmonic generation in thin film organic semiconductors
Authors:
Weiwei Li,
Ahmad Saleh,
Manas Sharma,
Marek Sierka,
Christian Hünecke,
Marcel Neuhaus,
Lina Hedewig,
Boris Bergues,
Meshaal Alharbi,
Abdallah M. Azzeer,
Stefanie Gräfe,
Matthias F. Kling,
Abdullah F. Alharbi,
Zilong Wang
Abstract:
Organic semiconductors have attracted extensive attention due to their excellent optical and electronic properties. Here, we present an experimental and theoretical study of Brunel harmonic generation in two types of porphyrin thin films: tetraphenylporphyrin (TPP) and its organometallic complex derivative Zinc tetraphenylporphyrin (ZnTPP). Our results show that the $π$-$π^\ast$ excitation of the…
▽ More
Organic semiconductors have attracted extensive attention due to their excellent optical and electronic properties. Here, we present an experimental and theoretical study of Brunel harmonic generation in two types of porphyrin thin films: tetraphenylporphyrin (TPP) and its organometallic complex derivative Zinc tetraphenylporphyrin (ZnTPP). Our results show that the $π$-$π^\ast$ excitation of the porphyrin ringsystem plays a major role in the harmonic generation process. We uncovered the contribution of an interband process to Brunel harmonic generation. In particular, the resonant ($S_0 \rightarrow S_2$ transition) enhanced multiphoton excitation is found to lead to an early onset of non-perturbative behavior for the 5th harmonic. Similar resonance effects are expected in Brunel harmonic generation with other organic materials.
△ Less
Submitted 13 November, 2022;
originally announced November 2022.
-
Energy Efficient UAV-Based Service Offloading over Cloud-Fog Architectures
Authors:
Hatem A. Alharbi,
Barzan A. Yosuf,
Mohammad Aldossary,
Jaber Almutairi,
Jaafar M. H. Elmirghani
Abstract:
Unmanned Aerial Vehicles (UAVs) are poised to play a central role in revolutionizing future services offered by the envisioned smart cities, thanks to their agility, flexibility, and cost-efficiency. UAVs are being widely deployed in different verticals including surveillance, search and rescue missions, delivery of items, and as an infrastructure for aerial communications in future wireless netwo…
▽ More
Unmanned Aerial Vehicles (UAVs) are poised to play a central role in revolutionizing future services offered by the envisioned smart cities, thanks to their agility, flexibility, and cost-efficiency. UAVs are being widely deployed in different verticals including surveillance, search and rescue missions, delivery of items, and as an infrastructure for aerial communications in future wireless networks. UAVs can be used to survey target locations, collect raw data from the ground (i.e., video streams), generate computing task(s) and offload it to the available servers for processing. In this work, we formulate a multi-objective optimization framework for both the network resource allocation and the UAV trajectory planning problem using Mixed Integer Linear Programming (MILP) optimization model. In consideration of the different stake holders that may exist in a Cloud-Fog environment, we minimize the sum of a weighted objective function, which allows network operators to tune the weights to emphasize/de-emphasize different cost functions such as the end-to-end network power consumption (EENPC), processing power consumption (PPC), UAVs total flight distance (UAVTFD), and UAVs total power consumption (UAVTPC). Our optimization models and results enable the optimum offloading decisions to be made under different constraints relating to EENPC, PPC, UAVTFD and UAVTPC which we explore in detail. For example, when the UAVs propulsion efficiency (UPE) is at its worst (10% considered), offloading via the macro base station is the best choice and a maximum power saving of 34% can be achieved. Extensive studies on the UAVs coverage path planning (CPP) and computation offloading have been conducted, but none has tackled the issue in a practical Cloud-Fog architecture in which access, metro and core layers are considered in the service offloading in a distributed architecture like the Cloud-Fog.
△ Less
Submitted 14 May, 2022;
originally announced May 2022.
-
Waves in weakly ionised solar plasmas
Authors:
A. Alharbi,
I. Ballai,
V. Fedun,
G. Verth
Abstract:
Here we study the nature and characteristics of waves propagating in partially ionised plasmas in the weakly ionised limit, typical for the lower part of the solar atmosphere. The framework in which the properties of waves are discussed depends on the relative magnitude of collisions between particles, but also on the relative magnitude of the collisional frequencies compared to the gyro-frequency…
▽ More
Here we study the nature and characteristics of waves propagating in partially ionised plasmas in the weakly ionised limit, typical for the lower part of the solar atmosphere. The framework in which the properties of waves are discussed depends on the relative magnitude of collisions between particles, but also on the relative magnitude of the collisional frequencies compared to the gyro-frequency of charged particles. Our investigation shows that the weakly ionised solar atmospheric plasma can divided into two regions and this division occurs, roughly, at the base of the chromosphere. In the solar photosphere the plasma is non-magnetised and the dynamics can described within the three-fluid framework where acoustic waves associated to each species can propagate. Due to the very high concentration of neutrals, the neutral sound waves propagates with no dam**, while for the other two modes the dam** rate is determined by collisions with neutrals. The ion and electron-related acoustic modes propagate with a cut-off determined by the collisional frequency of these species with neutrals. In the weakly ionised chromosphere only electrons are magnetised, however, the strong coupling of charged particles reduces the working framework to a two-fluid model. The disassociation of charged particles creates electric currents that can influence the characteristic of waves. The propagation properties of waves with respect to the angle of propagation are studied with the help of polar diagrams.
△ Less
Submitted 15 February, 2022;
originally announced February 2022.
-
Privacy-Aware Identity Cloning Detection based on Deep Forest
Authors:
Ahmed Alharbi,
Hai Dong,
Xun Yi,
Prabath Abeysekara
Abstract:
We propose a novel method to detect identity cloning of social-sensor cloud service providers to prevent the detrimental outcomes caused by identity deception. This approach leverages non-privacy-sensitive user profile data gathered from social networks and a powerful deep learning model to perform cloned identity detection. We evaluated the proposed method against the state-of-the-art identity cl…
▽ More
We propose a novel method to detect identity cloning of social-sensor cloud service providers to prevent the detrimental outcomes caused by identity deception. This approach leverages non-privacy-sensitive user profile data gathered from social networks and a powerful deep learning model to perform cloned identity detection. We evaluated the proposed method against the state-of-the-art identity cloning detection techniques and the other popular identity deception detection models atop a real-world dataset. The results show that our method significantly outperforms these techniques/models in terms of Precision and F1-score.
△ Less
Submitted 21 October, 2021;
originally announced October 2021.
-
NPS-AntiClone: Identity Cloning Detection based on Non-Privacy-Sensitive User Profile Data
Authors:
Ahmed Alharbi,
Hai Dong,
Xun Yi,
Prabath Abeysekara
Abstract:
Social sensing is a paradigm that allows crowdsourcing data from humans and devices. This sensed data (e.g. social network posts) can be hosted in social-sensor clouds (i.e. social networks) and delivered as social-sensor cloud services (SocSen services). These services can be identified by their providers' social network accounts. Attackers intrude social-sensor clouds by cloning SocSen service p…
▽ More
Social sensing is a paradigm that allows crowdsourcing data from humans and devices. This sensed data (e.g. social network posts) can be hosted in social-sensor clouds (i.e. social networks) and delivered as social-sensor cloud services (SocSen services). These services can be identified by their providers' social network accounts. Attackers intrude social-sensor clouds by cloning SocSen service providers' user profiles to deceive social-sensor cloud users. We propose a novel unsupervised SocSen service provider identity cloning detection approach, NPS-AntiClone, to prevent the detrimental outcomes caused by such identity deception. This approach leverages non-privacy-sensitive user profile data gathered from social networks to perform cloned identity detection. It consists of three main components: 1) a multi-view account representation model, 2) an embedding learning model and 3) a prediction model. The multi-view account representation model forms three different views for a given identity, namely a post view, a network view and a profile attribute view. The embedding learning model learns a single embedding from the generated multi-view representation using Weighted Generalized Canonical Correlation Analysis. Finally, NPS-AntiClone calculates the cosine similarity between two accounts' embedding to predict whether these two accounts contain a cloned account and its victim. We evaluated our proposed approach using a real-world dataset. The results showed that NPS-AntiClone significantly outperforms the existing state-of-the-art identity cloning detection techniques and machine learning approaches.
△ Less
Submitted 30 September, 2021;
originally announced September 2021.
-
Direct Nonparametric Predictive Inference Classification Trees
Authors:
Abdulmajeed Atiah Alharbi,
Frank P. A. Coolen,
Tahani Coolen-Maturi
Abstract:
Classification is the task of assigning a new instance to one of a set of predefined categories based on the attributes of the instance. A classification tree is one of the most commonly used techniques in the area of classification. In this paper, we introduce a novel classification tree algorithm which we call Direct Nonparametric Predictive Inference (D-NPI) classification algorithm. The D-NPI…
▽ More
Classification is the task of assigning a new instance to one of a set of predefined categories based on the attributes of the instance. A classification tree is one of the most commonly used techniques in the area of classification. In this paper, we introduce a novel classification tree algorithm which we call Direct Nonparametric Predictive Inference (D-NPI) classification algorithm. The D-NPI algorithm is completely based on the Nonparametric Predictive Inference (NPI) approach, and it does not use any other assumption or information. The NPI is a statistical methodology which learns from data in the absence of prior knowledge and uses only few modelling assumptions, enabled by the use of lower and upper probabilities to quantify uncertainty. Due to the predictive nature of NPI, it is well suited for classification, as the nature of classification is explicitly predictive as well. The D-NPI algorithm uses a new split criterion called Correct Indication (CI). The CI is about the informativity that the attribute variables will indicate, hence, if the attribute is very informative, it gives high lower and upper probabilities for CI. The CI reports the strength of the evidence that the attribute variables will indicate, based on the data. The CI is completely based on the NPI, and it does not use any additional concepts such as entropy. The performance of the D-NPI classification algorithm is tested against several classification algorithms using classification accuracy, in-sample accuracy and tree size on different datasets from the UCI machine learning repository. The experimental results indicate that the D-NPI classification algorithm performs well in terms of classification accuracy and in-sample accuracy.
△ Less
Submitted 25 August, 2021;
originally announced August 2021.
-
Near ambient pressure photoelectron spectro-microscopy: from gas-solid interface to operando devices
Authors:
Matteo Amati,
Luca Gregoratti,
Patrick Zeller,
Mark Greiner,
Mattia Scardamaglia,
Benjamin Junker,
Tamara Ruß,
Udo Weimar,
Nicolae Barsan,
Marco Favaro,
Abdulaziz Alharbi,
Ingvild J. T. Jensen,
Ayaz Ali,
Branson D. Belle
Abstract:
Near Ambient Pressure Scanning Photoelectron Microscopy adds to the widely used photoemission spectroscopy and its chemically selective capability two key features: (i) the possibility to chemically analyse samples in a more realistic environmental, gas pressure condition, and (ii) the capability to investigate a system at the relevant spatial scale. To achieve these goals the approach developed a…
▽ More
Near Ambient Pressure Scanning Photoelectron Microscopy adds to the widely used photoemission spectroscopy and its chemically selective capability two key features: (i) the possibility to chemically analyse samples in a more realistic environmental, gas pressure condition, and (ii) the capability to investigate a system at the relevant spatial scale. To achieve these goals the approach developed at the ESCA Microscopy beamline at the Elettra Synchrotron facility combines the submicron lateral resolution of a Scanning Photoelectron Microscope with a custom designed Near Ambient Pressure Cell where a gas pressure up to 0.1 mbar is confined inside it around the sample. In this manuscript a review of experiments performed with this unique setup will be presented to illustrate its potentiality in both fundamental and applicative research such as the oxidation reactivity and gas sensitivity of metal oxides and semiconductors. In particular the capability to do operando experiment with this setup opens the possibility to perform investigations with active devices to properly address the real nature of the studied systems, because it can yield to more conclusive results when microscopy and spectroscopy are simultaneously combined in a single technique.
△ Less
Submitted 16 April, 2021;
originally announced April 2021.
-
Gravitational Energy in Van Stockum Space-Time
Authors:
Ragab M Gad,
H. A. Alharbi
Abstract:
The purpose of this paper is to illustrate the problem of energy and momentum distributions of Van Stockum space-time within the framework of two different theories of gravity, general relativity and teleparallel gravity.
We have shown that for all homogeneous space-times with metric components $g_{μν}$ being functions of time variable, $t$, alone and independent of space variables the total gra…
▽ More
The purpose of this paper is to illustrate the problem of energy and momentum distributions of Van Stockum space-time within the framework of two different theories of gravity, general relativity and teleparallel gravity.
We have shown that for all homogeneous space-times with metric components $g_{μν}$ being functions of time variable, $t$, alone and independent of space variables the total gravitational energy for any finite volume is identically zero. By working with general relativity, we have calculated the energy-momentum density for Van Stockum space-time using double index complexes and in the framework teleparallel gravity, we used the energy-momentum complexes of Einstein, Bergmann-Thomson and Landau-Lifshitz. In our analysis, we sustained that general relativity and teleparallel gravity are equivalent theories of space-time under consideration. For space-time under consideration, we have shown that different complexes of energy-momentum density do not provide the same results neither in general relativity nor in teleparallel gravity.
△ Less
Submitted 2 April, 2021;
originally announced April 2021.
-
Social Media Identity Deception Detection: A Survey
Authors:
Ahmed Alharbi,
Hai Dong,
Xun Yi,
Zahir Tari,
Ibrahim Khalil
Abstract:
Social media have been growing rapidly and become essential elements of many people's lives. Meanwhile, social media have also come to be a popular source for identity deception. Many social media identity deception cases have arisen over the past few years. Recent studies have been conducted to prevent and detect identity deception. This survey analyses various identity deception attacks, which c…
▽ More
Social media have been growing rapidly and become essential elements of many people's lives. Meanwhile, social media have also come to be a popular source for identity deception. Many social media identity deception cases have arisen over the past few years. Recent studies have been conducted to prevent and detect identity deception. This survey analyses various identity deception attacks, which can be categorized into fake profile, identity theft and identity cloning. This survey provides a detailed review of social media identity deception detection techniques. It also identifies primary research challenges and issues in the existing detection techniques. This article is expected to benefit both researchers and social media providers.
△ Less
Submitted 22 April, 2021; v1 submitted 8 March, 2021;
originally announced March 2021.
-
Slow magnetoacoustic waves in gravitationally stratified two-fluid plasmas in strongly ionised limit
Authors:
A. Alharbi,
I. Ballai,
V. Fedun,
G. Verth
Abstract:
The plasma dynamics at frequencies comparable with collisional frequency between various species has to be described in multi-fluid framework, where collisional interaction between particles is an important ingredient. In our study we will assume that charged particles are strongly coupled, meaning that they form a single fluid that interacts with neutrals, therefore we will employ a two-fluid mod…
▽ More
The plasma dynamics at frequencies comparable with collisional frequency between various species has to be described in multi-fluid framework, where collisional interaction between particles is an important ingredient. In our study we will assume that charged particles are strongly coupled, meaning that they form a single fluid that interacts with neutrals, therefore we will employ a two-fluid model. Here we aim to investigate the evolutionary equation of slow sausage waves propagating in a gravitationally stratified flux tube in the two-fluid solar atmosphere in a strongly ionised limit using an initial value analysis. Due to the collisional interaction between massive particles (ions and neutrals) the governing equations are coupled. Solutions are sought in the strongly ionised limit and the density ratio between neutrals and charged particles is a small parameter. This limit is relevant to the upper part of the chromosphere. Our results show that slow sausage waves associated with charged particles propagate such that their possible frequency is affected by a cut-off due to the gravitational stratification. contrast, for neutral acoustic waves the cut-off value applies on their wavelength and only small wavelength waves are able to propagate. Slow modes associated to neutrals are driven by the collisional coupling with ions.
△ Less
Submitted 10 December, 2020;
originally announced December 2020.
-
A Simulation-based Education Approach for the Electromagnetic and Electromechanical Transient Waves in Power Systems
Authors:
Abdulelah Alharbi,
Shutang You
Abstract:
Power systems usually go through electromagnetic and electromechanical transient processes after different disturbances. Learning the characteristics and the differences between them are important but not easy for students majoring in power systems. This paper presents a simulation-based approach to comprehensively study the two types of transient waves, constituting the experimental part of the p…
▽ More
Power systems usually go through electromagnetic and electromechanical transient processes after different disturbances. Learning the characteristics and the differences between them are important but not easy for students majoring in power systems. This paper presents a simulation-based approach to comprehensively study the two types of transient waves, constituting the experimental part of the power system transient and stability course. In this approach, three models with different levels of complexity are developed to simultaneously show the two types of transient waves in the time domain. The developed models are then demonstrated as testbeds for investigating various aspects related to the two types of transient, such as waveforms induced by different disturbances, influencing factors on the propagation speed, and the interaction between incident waves and the reflective waves. In addition, a theory-to-practice engineering research process is demonstrated through develo** a power system event-location application, which is inspired by electromechanical wave propagation study. The proposed education process and models at various complexity levels provide a creative and interactive way for power system transients and dynamics study.
△ Less
Submitted 29 January, 2022; v1 submitted 21 October, 2020;
originally announced October 2020.
-
Subjective Metrics-based Cloud Market Performance Prediction
Authors:
Ahmed Alharbi,
Hai Dong
Abstract:
This paper explores an effective machine learning approach to predict cloud market performance for cloud consumers, providers and investors based on social media. We identified a set of comprehensive subjective metrics that may affect cloud market performance via literature survey. We used a popular sentiment analysis technique to process customer reviews collected from social media. Cloud market…
▽ More
This paper explores an effective machine learning approach to predict cloud market performance for cloud consumers, providers and investors based on social media. We identified a set of comprehensive subjective metrics that may affect cloud market performance via literature survey. We used a popular sentiment analysis technique to process customer reviews collected from social media. Cloud market revenue growth was selected as an indicator of cloud market performance. We considered the revenue growth of Amazon Web Services as the stakeholder of our experiments. Three machine learning models were selected: linear regression, artificial neural network, and support vector machine. These models were compared with a time series prediction model. We found that the set of subjective metrics is able to improve the prediction performance for all the models. The support vector machine showed the best prediction results compared to the other models.
△ Less
Submitted 21 September, 2020;
originally announced September 2020.
-
Energy Efficient Cloud-Fog Architecture
Authors:
Hatem A. Alharbi,
Taisir E. H. Elgorashi,
Jaafar M. H. Elmirghani
Abstract:
The advancements of cloud computing came as a radical transformation in the way Information and Communication Technology (ICT) services are deployed and maintained. Cloud computing provides ubiquitous on-demand access to an Internet-based pool of processing, storage, and communication resources offered to a large set of geographically distributed users. As the cloud computing infrastructure grows…
▽ More
The advancements of cloud computing came as a radical transformation in the way Information and Communication Technology (ICT) services are deployed and maintained. Cloud computing provides ubiquitous on-demand access to an Internet-based pool of processing, storage, and communication resources offered to a large set of geographically distributed users. As the cloud computing infrastructure grows and demand increases, the need for a new breed of on-demand computing that can efficiently maintain Quality of Service (QoS) requirements has increased. Fog computing was proposed to address the limitations of cloud computing, in terms of delay and high bandwidth requirements, by extending the on-demand resources of clouds to the edge of the network bringing them closer to the users. The massive growth and wide use of cloud-fog services have created serious power consumption concerns. This article delves into the energy consumption of cloud-fog services by raising headline questions related to; how significant the problem itself is, how different conditions/scenarios affect the energy consumption of the architecture, and how to orchestrate the use of the architecture in an energy-efficient manner. We start by summarizing the cloud-fog architecture including different communication and computing layers. Additionally, we give a brief overview of the role of Virtual Machine (VM) placement in optimally using cloud-fog resources in a dynamic manner. Then, we present the problem of energy efficient VMs placement and provide numerical results.
△ Less
Submitted 15 January, 2020;
originally announced January 2020.
-
Impact of the Net Neutrality Repeal on Communication Networks
Authors:
Hatem A. Alharbi,
Taisir E. H. Elgorashi,
Jaafar M. H. Elmirghani
Abstract:
Network neutrality (net neutrality) is the principle of treating equally all Internet traffic regardless of its source, destination, content, application or other related distinguishing metrics. Under net neutrality, ISPs are compelled to charge all content providers (CPs) the same per Gbps rate despite the growing profit achieved by CPs. In this paper, we study the impact of the repeal of net neu…
▽ More
Network neutrality (net neutrality) is the principle of treating equally all Internet traffic regardless of its source, destination, content, application or other related distinguishing metrics. Under net neutrality, ISPs are compelled to charge all content providers (CPs) the same per Gbps rate despite the growing profit achieved by CPs. In this paper, we study the impact of the repeal of net neutrality on communication networks by develo** a techno-economic Mixed Integer Linear Programming (MILP) model to maximize the potential profit ISPs can achieve by offering their services to CPs. We focus on video delivery as video traffic accounts for 78% of the cloud traffic. We consider an ISP that offers CPs different classes of service representing typical video content qualities including standard definition (SD), high definition (HD) and ultra-high definition (UHD) video. The MILP model maximizes the ISP profit by optimizing the prices of the different classes according to the users demand sensitivity to the change in price, referred to as Price Elasticity of Demand (PED). We analyze how PED impacts the profit in different CP delivery scenarios in cloud-fog architectures. The results show that the repeal of net neutrality can potentially increase ISPs profit by a factor of 8 with a pricing scheme that discriminates against data intensive content. Also, the repeal of net neutrality positively impacts the network energy efficiency by reducing the core network power consumption by 55% as a result of suppressing data intensive content compared to the net neutrality scenario.
△ Less
Submitted 20 November, 2019;
originally announced November 2019.
-
Second derivative analysis and alternative data filters for multi-dimensional spectroscopies: a Fourier-space perspective
Authors:
Rongjie Li,
Xiaoni Zhang,
Lin Miao,
Luca Stewart,
Erica Kotta,
Dong Qian,
Konstantine Kaznatcheev,
Jerzy T. Sadowski,
Elio Vescovo,
Abdullah Alharbi,
Ting Wu,
Takashi Taniguchi,
Kenji Watanabe,
Davood Shahrjerdi,
L. Andrew Wray
Abstract:
The second derivative image (SDI) method is widely applied to sharpen dispersive data features in multi-dimensional spectroscopies such as angle resolved photoemission spectroscopy (ARPES). Here, the SDI function is represented in Fourier space, where it has the form of a multi-band pass filter. The interplay of the SDI procedure with undesirable noise and background features in ARPES data sets is…
▽ More
The second derivative image (SDI) method is widely applied to sharpen dispersive data features in multi-dimensional spectroscopies such as angle resolved photoemission spectroscopy (ARPES). Here, the SDI function is represented in Fourier space, where it has the form of a multi-band pass filter. The interplay of the SDI procedure with undesirable noise and background features in ARPES data sets is reviewed, and it is shown that final image quality can be improved by eliminating higher Fourier harmonics of the SDI filter. We then discuss extensions of SDI-like band pass filters to higher dimensional data sets, and how one can create even more effective filters with some a priori knowledge of the spectral features.
△ Less
Submitted 23 June, 2019;
originally announced June 2019.
-
Energy Efficient Virtual Machine Services Placement in Cloud-Fog Architecture
Authors:
Hatem A. Alharbi,
Taisir E. H. Elgorashi,
Jaafar M. H. Elmirghani
Abstract:
The proliferation in data volume and processing requests calls for a new breed of on-demand computing. Fog computing is proposed to address the limitations of cloud computing by extending processing and storage resources to the edge of the network. Cloud and fog computing employ virtual machines (VMs) for efficient resource utilization. In order to optimize the virtual environment, VMs can be migr…
▽ More
The proliferation in data volume and processing requests calls for a new breed of on-demand computing. Fog computing is proposed to address the limitations of cloud computing by extending processing and storage resources to the edge of the network. Cloud and fog computing employ virtual machines (VMs) for efficient resource utilization. In order to optimize the virtual environment, VMs can be migrated or replicated over geo-distributed physical machines for load balancing and energy efficiency. In this work, we investigate the offloading of VM services from the cloud to the fog considering the British Telecom (BT) network topology. The analysis addresses the impact of different factors including the VM workload and the proximity of fog nodes to users considering the data rate of state-of-the-art applications. The result show that the optimum placement of VMs significantly decreases the total power consumption by up to 75% compared to a single cloud placement.
△ Less
Submitted 23 April, 2019;
originally announced April 2019.
-
Real-time Emissions of Telecom Core Networks
Authors:
Hatem A. Alharbi,
Mohamed Musa,
Taisir E. H. El-Gorashi,
Jaafar M. H. Elmirghani
Abstract:
This paper focuses on investigating the direct and life cycle assessment (LCA) emissions in core networks, considering British telecom (BT) core network as a case study. We found that on 1st December 2016, the total BT core network emissions were around 22 tCO2e and 25 tCO2e of direct and LCA emissions, respectively.
This paper focuses on investigating the direct and life cycle assessment (LCA) emissions in core networks, considering British telecom (BT) core network as a case study. We found that on 1st December 2016, the total BT core network emissions were around 22 tCO2e and 25 tCO2e of direct and LCA emissions, respectively.
△ Less
Submitted 18 August, 2018;
originally announced August 2018.
-
Quantitative principles for precise engineering of sensitivity in carbon-based electrochemical sensors
Authors:
Ting Wu,
Abdullah Alharbi,
Roozbeh Kiani,
Davood Shahrjerdi
Abstract:
A major practical barrier for implementing carbon-based electrode arrays with high device-packing density is to ensure large, predictable, and homogeneous sensitivities across the array. Overcoming this barrier depends on quantitative models to predict electrode sensitivity from its material structure. However, such models are currently lacking. Here, we show that the sensitivity of multilayer gra…
▽ More
A major practical barrier for implementing carbon-based electrode arrays with high device-packing density is to ensure large, predictable, and homogeneous sensitivities across the array. Overcoming this barrier depends on quantitative models to predict electrode sensitivity from its material structure. However, such models are currently lacking. Here, we show that the sensitivity of multilayer graphene electrodes increases linearly with the average point defect density, whereas it is unaffected by line defects or oxygen-containing groups. These quantitative relationships persist until the electrode material transitions to a fully disordered sp2 carbon, where sensitivity declines sharply. We show that our results generalize to a variety of graphene production methods and use them to derive a predictive model that guides nano-engineering graphene structure for optimum sensitivity. Our approach achieves reproducible fabrication of miniaturized sensors with extraordinarily higher sensitivity than conventional material. These results lay the foundation for new integrated electrochemical sensor arrays based on nano-engineered graphene.
△ Less
Submitted 22 June, 2018;
originally announced June 2018.
-
Optical identification using imperfections in 2D materials
Authors:
Yameng Cao,
Alexander J. Robson,
Abdullah Alharbi,
Jonathan Roberts,
Christopher S. Woodhead,
Yasir J. Noori,
Ramón Bernardo-Gavito,
Davood Shahrjerdi,
Utz Roedig,
Vladimir I. Falko,
Robert J. Young
Abstract:
The ability to uniquely identify an object or device is important for authentication. Imperfections, locked into structures during fabrication, can be used to provide a fingerprint that is challenging to reproduce. In this paper, we propose a simple optical technique to read unique information from nanometer-scale defects in 2D materials. Flaws created during crystal growth or fabrication lead to…
▽ More
The ability to uniquely identify an object or device is important for authentication. Imperfections, locked into structures during fabrication, can be used to provide a fingerprint that is challenging to reproduce. In this paper, we propose a simple optical technique to read unique information from nanometer-scale defects in 2D materials. Flaws created during crystal growth or fabrication lead to spatial variations in the bandgap of 2D materials that can be characterized through photoluminescence measurements. We show a simple setup involving an angle-adjustable transmission filter, simple optics and a CCD camera can capture spatially-dependent photoluminescence to produce complex maps of unique information from 2D monolayers. Atomic force microscopy is used to verify the origin of the optical signature measured, demonstrating that it results from nanometer-scale imperfections. This solution to optical identification with 2D materials could be employed as a robust security measure to prevent counterfeiting.
△ Less
Submitted 24 June, 2017;
originally announced June 2017.
-
Physical cryptographic primitives by chemical vapor deposition of layered MoS2
Authors:
Abdullah Alharbi,
Darren Armstrong,
Somayah Alharbi,
Davood Shahrjerdi
Abstract:
Development of physical cryptographic primitives for generating strong security keys is central to combating security threats such as counterfeiting and unauthorized access to electronic devices. We introduce a new class of physical cryptographic primitives from layered molybdenum disulfide (MoS2) which leverages the unique properties of this material system. Using chemical vapor deposition, we sy…
▽ More
Development of physical cryptographic primitives for generating strong security keys is central to combating security threats such as counterfeiting and unauthorized access to electronic devices. We introduce a new class of physical cryptographic primitives from layered molybdenum disulfide (MoS2) which leverages the unique properties of this material system. Using chemical vapor deposition, we synthesize a MoS2 monolayer film covered with speckles of multilayer islands, where the growth process is engineered for an optimal speckle density. The physical cryptographic primitive is an array of 2048 pixels fabricated from this film. Using the Clark-Evans test, we confirm that the distribution of islands on the film exhibits complete spatial randomness, making this cryptographic primitive ideal for security applications. A unique optical response is generated by applying an optical stimulus to the structure. The basis for this unique response is the dependence of the photoemission on the number of MoS2 layers which by design is random throughout the film. The optical response is used to generate cryptographic keys. Standard security tests confirm the uniqueness, reliability, and uniformity of these keys. This study reveals a new opportunity for generating strong and versatile nano-engineered security primitives from layered transition metal dichalcogenides.
△ Less
Submitted 21 June, 2017;
originally announced June 2017.
-
The Influence of Trust and subjective Norms on Citizens Intentions to Engage in E-participation on E-government Websites
Authors:
Abdullah Alharbi,
Kyeong Kang,
Igor Hawryszkiewycz
Abstract:
Advancements in web technology have revolutionised the way citizens interact with governments. Unlike traditional methods of communication between citizens and governments, E-Participation via e-government websites enhances communication and enables citizens to become actively involved in the policy-making process. Despite the growing importance of e-participation, the potential factors influencin…
▽ More
Advancements in web technology have revolutionised the way citizens interact with governments. Unlike traditional methods of communication between citizens and governments, E-Participation via e-government websites enhances communication and enables citizens to become actively involved in the policy-making process. Despite the growing importance of e-participation, the potential factors influencing citizens engagement in e-participation have not been the subject of investigation. Using responses obtained from Saudi citizens, this study examines a number of factors that may influence the intentions of citizens to engage in e-participation activities on e-government websites. The results suggest that the factors of trust and subjective norms have a significant impact on the intentions of citizens to engage in e-participation activities.
△ Less
Submitted 28 May, 2016;
originally announced June 2016.
-
Deterministic creation of stationary entangled states by dissipation
Authors:
A. F. Alharbi,
Z. Ficek
Abstract:
We propose a practical physical system for creation of a stationary entanglement by dissipation without employing the environment engineering techniques. The system proposed is composed of two perfectly distinguishable atoms, through their significantly different transition frequencies, with only one atom addressed by an external laser field. We show that the arrangement would easily be realized i…
▽ More
We propose a practical physical system for creation of a stationary entanglement by dissipation without employing the environment engineering techniques. The system proposed is composed of two perfectly distinguishable atoms, through their significantly different transition frequencies, with only one atom addressed by an external laser field. We show that the arrangement would easily be realized in practice by trap** the atoms at the distance equal to the quarter-wavelength of a standing-wave laser field and locating one of the atoms at a node and the other at the successive antinode of the wave. The undesirable dipole-dipole interaction between the atoms, that could be large at this small distance, is adjusted to zero by a specific initial preparation of the atoms or by a specific polarization of the atomic dipole moments. Following this arrangement, we show that the dissipative relaxation can create a stationary entanglement on demand by tuning the Rabi frequency of the laser field to the difference between the atomic transition frequencies. The laser field dresses the atom and we identify that the entangled state occurs when the frequency of one of the Rabi sidebands of the driven atom tunes to frequency of the undriven atom. It is also found that this system behaves as a cascade open system where the fluorescence from the dressed atom drives the other atom with no feedback.
△ Less
Submitted 16 November, 2010; v1 submitted 30 September, 2010;
originally announced September 2010.