-
Robustness of high-$β$ W7-X plasmas against ideal ballooning instability
Authors:
Yao Zhou,
K. Aleynikova,
Chang Liu,
N. M. Ferraro
Abstract:
To examine the robustness of the designed 5% $β$-limit for high-performance operation in the W7-X stellarator, we undertake nonlinear magnetohydrodynamic (MHD) simulations of pressure-driven instabilities using the M3D-$C^1$ code. Consistent with linear analyses, ideal ballooning instabilities occur as $β$ exceeds 5% in the standard configuration. Nonetheless, the modes saturate nonlinearly at rel…
▽ More
To examine the robustness of the designed 5% $β$-limit for high-performance operation in the W7-X stellarator, we undertake nonlinear magnetohydrodynamic (MHD) simulations of pressure-driven instabilities using the M3D-$C^1$ code. Consistent with linear analyses, ideal ballooning instabilities occur as $β$ exceeds 5% in the standard configuration. Nonetheless, the modes saturate nonlinearly at relatively low levels without triggering large-scale crashes, even though confinement degradation worsens as $β$ increases. In contrast, in an alternative configuration with nearly zero magnetic shear, ideal interchange modes induce a pressure crash at $β= 1\%$. These results suggest that the standard W7-X configuration might have a soft $β$-limit that is fairly immune to major MHD events, and that interchange instabilities tend to be more detrimental than ideal ballooning in stellarators.
△ Less
Submitted 2 April, 2024;
originally announced April 2024.
-
Nonlinear MHD modeling of soft $β$ limits in W7-AS
Authors:
Rohan Ramasamy,
Ksenia Aleynikova,
Nikita Nikulsin,
Florian Hindenlang,
Ihor Holod,
Erika Strumberger,
Matthias Hoelzl,
the JOREK team
Abstract:
An important question for the outlook of stellarator reactors is their robustness against pressure driven modes, and the underlying mechanism behind experimentally observed soft $β$ limits. Towards building a robust answer to these questions, simulation studies are presented using a recently derived reduced nonlinear MHD model. First, the initial model implementation is extended to capture fluid c…
▽ More
An important question for the outlook of stellarator reactors is their robustness against pressure driven modes, and the underlying mechanism behind experimentally observed soft $β$ limits. Towards building a robust answer to these questions, simulation studies are presented using a recently derived reduced nonlinear MHD model. First, the initial model implementation is extended to capture fluid compression by including the influence of parallel flows. Linear benchmarks of a (2, 1) tearing mode in W7-AS geometry, and interchange modes in a finite $β$, net-zero current carrying stellarator with low magnetic shear are then used to demonstrate the modeling capabilities. Finally, a validation study is conducted on experimental reconstructions of finite $β$ W7-AS discharges. In agreement with past experimental analysis, it is shown that (i) the MHD activity is resistive, (ii) a soft $β$ limit is observed, when the plasma resistivity approaches the estimated experimental value, and (iii) low $n$ MHD activity is observed at intermediate $β$ values, particularly a nonlinearly dominant (2, 1) mode. The MHD activity is mild, explaining the soft $β$ limit, because the plasma volume remains separated into distinct sub-volumes in which field lines are ergodically confined. For the assumed transport parameters, the enhanced perpendicular transport along stochastic magnetic field lines can be overcome with the experimental heating power. The limitations in the current modeling are described, alongside an outlook for characterising soft $β$ limits in more detail in future work.
△ Less
Submitted 5 February, 2024;
originally announced February 2024.
-
Enhanced transport at high plasma pressure and sub-threshold kinetic ballooning modes in Wendelstein 7-X
Authors:
P. Mulholland,
K. Aleynikova,
B. J. Faber,
M. J. Pueschel,
J. H. E. Proll,
C. C. Hegna,
P. W. Terry,
C. Nührenberg
Abstract:
High-performance fusion plasmas, requiring high pressure $β$, are not well-understood in stellarator-type experiments. Here, the effect of $β$ on ion-temperature-gradient-driven (ITG) turbulence is studied in Wendelstein 7-X (W7-X), showing that subdominant kinetic ballooning modes (KBMs) are unstable well below the ideal MHD threshold and get strongly excited in the turbulence. By zonal-flow eros…
▽ More
High-performance fusion plasmas, requiring high pressure $β$, are not well-understood in stellarator-type experiments. Here, the effect of $β$ on ion-temperature-gradient-driven (ITG) turbulence is studied in Wendelstein 7-X (W7-X), showing that subdominant kinetic ballooning modes (KBMs) are unstable well below the ideal MHD threshold and get strongly excited in the turbulence. By zonal-flow erosion, these sub-threshold KBMs (stKBMs) affect ITG saturation and enable higher heat fluxes. Controlling stKBMs will be essential to allow W7-X and future stellarators to achieve maximum performance.
△ Less
Submitted 25 September, 2023; v1 submitted 6 June, 2023;
originally announced June 2023.
-
Nonlinear magnetohydrodynamic modeling of current-drive-induced sawtooth-like crashes in the W7-X stellarator
Authors:
Yao Zhou,
K. Aleynikova,
N. M. Ferraro
Abstract:
Sawtooth-like core electron temperature crashes have been observed in W7-X experiments with electron cyclotron current drive. We present nonlinear single-fluid magnetohydrodynamic simulations of this phenomenon using the newly developed stellarator modeling capability of the M3D-$C^1$ code. The near-axis current drive gives rise to two $ι=1$ resonances in the equilibrium rotational transform profi…
▽ More
Sawtooth-like core electron temperature crashes have been observed in W7-X experiments with electron cyclotron current drive. We present nonlinear single-fluid magnetohydrodynamic simulations of this phenomenon using the newly developed stellarator modeling capability of the M3D-$C^1$ code. The near-axis current drive gives rise to two $ι=1$ resonances in the equilibrium rotational transform profile so that two consecutive $(1,1)$ internal kink modes are seen in the simulations. A small-amplitude crash at the inner resonance occurs first, which may correspond to the sawtooth precursors observed in the experiments. A bigger crash at the outer resonance then flattens the core temperature profile, which shows semi-quantitative agreements with experimental measurements on certain metrics such as the crash amplitude and the inversion radius of the temperature change. These results illustrate a likely mechanism of the current-drive-induced sawtooth-like crashes in W7-X and, to some extent, validate the stellarator modeling capability of M3D-$C^1$.
△ Less
Submitted 16 March, 2023; v1 submitted 18 July, 2022;
originally announced July 2022.
-
Non-linear Simulations of MHD Instabilities in Tokamaks Including Eddy Current Effects and Perspectives for the Extension to Halo Currents
Authors:
M. Hoelzl,
G. T. A. Huijsmans,
P. Merkel,
C. Atanasiu,
K. Lackner,
E. Nardon,
K. Aleynikova,
F. Liu,
E. Strumberger,
R. McAdams,
I. Chapman,
A. Fil
Abstract:
The dynamics of large scale plasma instabilities can strongly be influenced by the mutual interaction with currents flowing in conducting vessel structures. Especially eddy currents caused by time-varying magnetic perturbations and halo currents flowing directly from the plasma into the walls are important. The relevance of a resistive wall model is directly evident for Resistive Wall Modes (RWMs)…
▽ More
The dynamics of large scale plasma instabilities can strongly be influenced by the mutual interaction with currents flowing in conducting vessel structures. Especially eddy currents caused by time-varying magnetic perturbations and halo currents flowing directly from the plasma into the walls are important. The relevance of a resistive wall model is directly evident for Resistive Wall Modes (RWMs) or Vertical Displacement Events (VDEs). However, also the linear and non-linear properties of most other large-scale instabilities may be influenced significantly by the interaction with currents in conducting structures near the plasma. The understanding of halo currents arising during disruptions and VDEs, which are a serious concern for ITER as they may lead to strong asymmetric forces on vessel structures, could also benefit strongly from these non-linear modeling capabilities. Modeling the plasma dynamics and its interaction with wall currents requires solving the magneto-hydrodynamic (MHD) equations in realistic toroidal X-point geometry consistently coupled with a model for the vacuum region and the resistive conducting structures. With this in mind, the non-linear finite element MHD code JOREK has been coupled with the resistive wall code STARWALL, which allows to include the effects of eddy currents in 3D conducting structures in non-linear MHD simulations. This article summarizes the capabilities of the coupled JOREK-STARWALL system and presents benchmark results as well as first applications to non-linear simulations of RWMs, VDEs, disruptions triggered by massive gas injection, and Quiescent H-Mode. As an outlook, the perspectives for extending the model to halo currents are described.
△ Less
Submitted 23 September, 2014; v1 submitted 27 August, 2014;
originally announced August 2014.
