Showing 1–50 of 50 results for author: Alesini, D

Search for Axion dark matter with the QUAX-LNF tunable haloscope

Authors: A. Rettaroli, D. Alesini, D. Babusci, C. Braggio, G. Carugno, D. D'Agostino, A. D'Elia, D. Di Gioacchino, R. Di Vora, P. Falferi, U. Gambardella, A. Gardikiotis, C. Gatti, G. Iannone, C. Ligi, A. Lombardi, G. Maccarrone, A. Ortolan, G. Ruoso, S. Tocci, G. Vidali

Abstract: We report the first experimental results obtained with the new haloscope of the QUAX experiment located at Laboratori Nazionali di Frascati of INFN (LNF). The haloscope is composed of a OFHC Cu resonant cavity cooled down to about 30 mK and immersed in a magnetic field of 8 T. The cavity frequency was varied in a 6 MHz range between 8.831496 and 8.83803 GHz. This corresponds to a previously unprob… ▽ More We report the first experimental results obtained with the new haloscope of the QUAX experiment located at Laboratori Nazionali di Frascati of INFN (LNF). The haloscope is composed of a OFHC Cu resonant cavity cooled down to about 30 mK and immersed in a magnetic field of 8 T. The cavity frequency was varied in a 6 MHz range between 8.831496 and 8.83803 GHz. This corresponds to a previously unprobed mass range between 36.52413 and 36.5511 $μ$eV. We don't observe any excess in the power spectrum and set limits on the axion-photon coupling in this mass range down to $g_{aγγ} < 0.861 \times 10^{-13}$ GeV$^{-1}$ with the confidence level set at $90\%$. △ Less

Submitted 15 May, 2024; v1 submitted 29 February, 2024; originally announced February 2024.

Comments: Submitted to Physical Review D (https://journals.aps.org/prd/)

The future search for low-frequency axions and new physics with the FLASH resonant cavity experiment at Frascati National Laboratories

Authors: David Alesini, Danilo Babusci, Paolo Beltrame, Fabio Bossi, Paolo Ciambrone, Alessandro D'Elia, Daniele Di Gioacchino, Giampiero Di Pirro, Babette Döbrich, Paolo Falferi, Claudio Gatti, Maurizio Giannotti, Paola Gianotti, Gianluca Lamanna, Carlo Ligi, Giovanni Maccarrone, Giovanni Mazzitelli, Alessandro Mirizzi, Michael Mueck, Enrico Nardi, Federico Nguyen, Alessio Rettaroli, Javad Rezvani, Francesco Enrico Teofilo, Simone Tocci , et al. (3 additional authors not shown)

Abstract: We present a proposal for a new experiment, the FINUDA magnet for Light Axion SearcH (FLASH), a large resonant-cavity haloscope in a high static magnetic field which is planned to probe new physics in the form of dark matter (DM) axions, scalar fields, chameleons, hidden photons, as well as high frequency gravitational waves (GWs). Concerning the QCD axion, FLASH will search for these particles as… ▽ More We present a proposal for a new experiment, the FINUDA magnet for Light Axion SearcH (FLASH), a large resonant-cavity haloscope in a high static magnetic field which is planned to probe new physics in the form of dark matter (DM) axions, scalar fields, chameleons, hidden photons, as well as high frequency gravitational waves (GWs). Concerning the QCD axion, FLASH will search for these particles as the DM in the mass range (0.49-1.49) ueV, thus filling the mass gap between the ranges covered by other planned searches. A dedicated Microstrip SQUID operating at ultra-cryogenic temperatures will amplify the signal. The frequency range accessible overlaps with the Very High Frequency (VHF) range of the radio wave spectrum and allows for a search in GWs in the frequency range (100-300) MHz. The experiment will make use of the cryogenic plant and magnet of the FINUDA experiment at INFN Frascati National Laboratories near Rome (Italy); the operations needed to restore the functionalities of the apparatus are currently underway. We present the setup of the experiment and the sensitivity forecasts for the detection of axions, scalar fields, chameleons, hidden photons, and GWs. △ Less

Submitted 1 September, 2023; originally announced September 2023.

Report number: CA21106; CA21136

Journal ref: Phys.Dark Univ. 42 (2023) 101370

TEX (TEst stand for X-band) at LNF

Authors: C. Di Giulio, F. Cardelli, S. Pioli, D. Alesini, M. Bellaveglia, S. Bini, B. Buonomo, S. Cantarella, G. Catuscelli, M. Ceccarelli, R. Ceccarelli, M. Cianfrini, R. Clementi, E. Di Pasquale, G. Di Raddo, R. Di Raddo, A. Falone, A. Gallo, G. Latini, A. Liedl, V. Lollo, G. Piermarini, L. Piersanti, S. Quaglia, L. A. Rossi , et al. (5 additional authors not shown)

Abstract: TEX facility if commissioned for high power testing to characterize accelerating structures and validate them for the operation on future particle accelerators for medical, industrial and research applications. At this aim, TEX is directly involved in the LNF leading project EuPRAXIA@SPARC_Lab. The brief description of the facility and its status and prospective will be provided. TEX facility if commissioned for high power testing to characterize accelerating structures and validate them for the operation on future particle accelerators for medical, industrial and research applications. At this aim, TEX is directly involved in the LNF leading project EuPRAXIA@SPARC_Lab. The brief description of the facility and its status and prospective will be provided. △ Less

Submitted 31 August, 2023; v1 submitted 6 August, 2023; originally announced August 2023.

Comments: Talk presented at the International Workshop on Future Linear Colliders (LCWS 2023), 15-19 May 2023. C23-05-15.3

Search for galactic axions with a traveling wave parametric amplifier

Authors: R. Di Vora, A. Lombardi, A. Ortolan, R. Pengo, G. Ruoso, C. Braggio, G. Carugno, L. Taffarello, G. Cappelli, N. Crescini, M. Esposito, L. Planat, A. Ranadive, N. Roch, D. Alesini, D. Babusci, A. D'Elia, D. Di Gioacchino, C. Gatti, C. Ligi, G. Maccarrone, A. Rettaroli, S. Tocci, D. D'Agostino, U. Gambardella , et al. (2 additional authors not shown)

Abstract: A traveling wave parametric amplifier has been integrated in the haloscope of the QUAX experiment. A search for dark matter axions has been performed with a high Q dielectric cavity immersed in a 8 T magnetic field and read by a detection chain having a system noise temperature of about 2.1 K at the frequency of 10.353 GHz. Scanning has been conducted by varying the cavity frequency using sapphire… ▽ More A traveling wave parametric amplifier has been integrated in the haloscope of the QUAX experiment. A search for dark matter axions has been performed with a high Q dielectric cavity immersed in a 8 T magnetic field and read by a detection chain having a system noise temperature of about 2.1 K at the frequency of 10.353 GHz. Scanning has been conducted by varying the cavity frequency using sapphire rods immersed into the cavity. At multiple operating frequencies, the sensitivity of the instrument was at the level of viable axion models. △ Less

Submitted 15 April, 2023; originally announced April 2023.

Design, optimization and experimental characterization of RF injectors for high brightness electron beams and plasma acceleration

Authors: V. Shpakov, D. Alesini, M. P. Anania, M. Behtouei, B. Buonomo, M. Bellaveglia, A. Biagioni, F. Cardelli, M. Carillo, E. Chiadroni, A. Cianchi, G. Costa, M. Del Giorno, L. Faillace, M. Ferrario, M. del Franco, G. Franzini, M. Galletti, L. Giannessi, A. Giribono, A. Liedl, V. Lollo, A. Mostacci, G. Di Pirro, L. Piersanti , et al. (8 additional authors not shown)

Abstract: In this article, we share our experience related to the new photo-injector commissioning at the SPARC\_LAB test facility. The new photo-injector was installed into an existing machine and our goal was not only to improve the final beam parameters themselves but to improve the machine handling in day-to-day operations as well. Thus, besides the pure beam characterization, this article contains info… ▽ More In this article, we share our experience related to the new photo-injector commissioning at the SPARC\_LAB test facility. The new photo-injector was installed into an existing machine and our goal was not only to improve the final beam parameters themselves but to improve the machine handling in day-to-day operations as well. Thus, besides the pure beam characterization, this article contains information about the improvements, that were introduced into the new photo-injector design from the machine maintenance point of view, and the benefits, that we gained by using the new technique to assemble the gun itself. △ Less

Submitted 12 December, 2022; originally announced December 2022.

Search for galactic axions with a high-Q dielectric cavity

Authors: D. Alesini, D. Babusci, C. Braggio, G. Carugno, N. Crescini, D. DAgostino, A. D'Elia, D. Di Gioacchino, R. Di Vora, P. Falferi, U. Gambardella, C. Gatti, G. Iannone, C. Ligi, A. Lombardi, G. Maccarrone, A. Ortolan, R. Pengo, A. Rettaroli, G. Ruoso, L. Taffarello, S. Tocci

Abstract: A haloscope of the QUAX--$aγ$ experiment, composed of an high-Q resonant cavity immersed in a 8 T magnet and cooled to $\sim 4.5$~K is operated to search for galactic axion with mass $m_a\simeq42.8~μ\text{eV}$. The design of the cavity with hollow dielectric cylinders concentrically inserted in a OFHC Cu cavity, allowed us to maintain a loaded quality-factor Q $\sim 300000$ during the measurements… ▽ More A haloscope of the QUAX--$aγ$ experiment, composed of an high-Q resonant cavity immersed in a 8 T magnet and cooled to $\sim 4.5$~K is operated to search for galactic axion with mass $m_a\simeq42.8~μ\text{eV}$. The design of the cavity with hollow dielectric cylinders concentrically inserted in a OFHC Cu cavity, allowed us to maintain a loaded quality-factor Q $\sim 300000$ during the measurements in presence of magnetic field. Through the cavity tuning mechanism it was possible to modulate the resonance frequency of the haloscope in the region $10.35337-10.35345$~GHz and thus acquire different dataset at different resonance frequencies. Acquiring each dataset for about 50 minutes, combining them and correcting for the axion's signal estimation-efficiency we set a limit on the axion-photon coupling $g_{aγγ}< 0.731\times10^{-13}$ GeV$^{-1}$ with the confidence level set at $90\%$. △ Less

Submitted 26 August, 2022; originally announced August 2022.

A high-Q microwave dielectric resonator for axion dark matter haloscopes

Authors: R. Di Vora, D. Alesini, C. Braggio, G. Carugno, N. Crescini, D. D Agostino, D. Di Gioacchino, P. Falferi, U. Gambardella, C. Gatti, G. Iannone, C. Ligi, A. Lombardi, G. Maccarrone, A. Ortolan, R. Pengo, A. Rettaroli, G. Ruoso, L. Taffarello, S. Tocci

Abstract: The frequency band 1-15 GHz provides exciting prospects for resonant axion haloscopes as indicated by cosmological and astrophysical arguments. Among the challenges currently addressed to reach the required sensitivity, the development of high quality factor cavities that tolerate multi-Tesla fields plays a central role. We report a 3D resonator based on a right circular copper cavity with hollo… ▽ More The frequency band 1-15 GHz provides exciting prospects for resonant axion haloscopes as indicated by cosmological and astrophysical arguments. Among the challenges currently addressed to reach the required sensitivity, the development of high quality factor cavities that tolerate multi-Tesla fields plays a central role. We report a 3D resonator based on a right circular copper cavity with hollow cylinders that confine higher order modes around the cylinder axis. Its effective volume at 10.3\,GHz is $3.4 \cdot 10^{-2}$ liters, and under an 8\,T-field we measured an internal quality factor of more than 9 millions. These parameters demonstrate the potential of this unique resonator to probe galactic dark matter axion at remarkable scan rates of 15\,MHz/day when the cavity is readout by a quantum-limited receiver. △ Less

Submitted 11 January, 2022; originally announced January 2022.

STAR HE-Linac Complete Detailed Design Report

Authors: A. Bacci, L. Faillace, L. Pellegrino, D. Alesini, S. Bini, F. Cardelli, G. Catuscelli, F. Chiarelli, I. Drebot, A. Esposito, A. Gallo, A. Ghigo, D. Giannotti, V. Petrillo, L. Piersanti, E. Puppin, M. Rossetti Conti, L. Serafini, A. Stella, A. Vannozzi, S. Vescovi

Abstract: This Document contains a complete technical description of the system devoted to the upgrade of the STAR Linear Accelerator (STAR Linac). According to the Contract signed between Universita della Calabria (UniCal) and Istituto Nazionale di Fisica Nucleare (INFN) on May 7th, 2021, INFN is committed to install, test and commission the upgrade of the STAR Linac denominated STAR-HE-Linac (STAR High En… ▽ More This Document contains a complete technical description of the system devoted to the upgrade of the STAR Linear Accelerator (STAR Linac). According to the Contract signed between Universita della Calabria (UniCal) and Istituto Nazionale di Fisica Nucleare (INFN) on May 7th, 2021, INFN is committed to install, test and commission the upgrade of the STAR Linac denominated STAR-HE-Linac (STAR High Energy Linac), hereafter STAR-HEL. The technical components as well as the installation / test procedures and the ancillary equipment involved in such an upgrade are the object of this Document, named Complete Detailed Design Report. A technical offer was submitted by INFN in the frame of its participation to the tender issued by UniCal, describing a possible energy upgrade of the STAR Linac, with an electron beam energy boosted from 65 MeV up to 150 MeV by means of Radiofrequency (RF) accelerating sections and power stations based on S-band technology (ie, 2856 MHz RF frequency). Following the Contract signature, INFN conceived and conceptually designed a technology change that offers several advantages both on performances and on operational reliability of STAR-HEL, based on adopting C-band technology (ie, 5712 MHz RF frequency) for accelerating sections and RF power stations. Such a technology change was illustrated in a dedicated document named "improvement option for STAR-2 HE-Linac", addressed to UniCal STAR Management Board and tender R.U.P. for approval on June 9th, 2021. INFN received a formal letter of approval on June 16th, 2021. △ Less

Submitted 20 September, 2021; originally announced September 2021.

Development of a Josephson junction based single photon microwave detector for axion detection experiments

Authors: D Alesini, D Babusci, C Barone, B Buonomo, M M Beretta, L Bianchini, G Castellano, F Chiarello, D Di Gioacchino, P Falferi, G Felici, G Filatrella, L G Foggetta, A Gallo, C Gatti, F Giazotto, G Lamanna, F Ligabue, N Ligato, C Ligi, G Maccarrone, B Margesin, F Mattioli, E Monticone, L Oberto , et al. (8 additional authors not shown)

Abstract: Josephson junctions, in appropriate configurations, can be excellent candidates for detection of single photons in the microwave frequency band. Such possibility has been recently addressed in the framework of galactic axion detection. Here are reported recent developments in the modelling and simulation of dynamic behaviour of a Josephson junction single microwave photon detector. For a Josephson… ▽ More Josephson junctions, in appropriate configurations, can be excellent candidates for detection of single photons in the microwave frequency band. Such possibility has been recently addressed in the framework of galactic axion detection. Here are reported recent developments in the modelling and simulation of dynamic behaviour of a Josephson junction single microwave photon detector. For a Josephson junction to be enough sensitive, small critical currents and operating temperatures of the order of ten of mK are necessary. Thermal and quantum tunnelling out of the zero-voltage state can also mask the detection process. Axion detection would require dark count rates in the order of 0.001 Hz. It is, therefore, is of paramount importance to identify proper device fabrication parameters and junction operation point. △ Less

Submitted 2 July, 2021; originally announced July 2021.

Comments: 7 pages, 9 figures

Journal ref: J. Phys.: Conf. Ser. 1559 012020 (2020)

Status of the SIMP Project: Toward the Single Microwave Photon Detection

Authors: David Alesini, Danilo Babusci, Carlo Barone, Bruno Buonomo, Matteo Mario Beretta, Lorenzo Bianchini, Gabriella Castellano, Fabio Chiarello, Daniele Di Gioacchino, Paolo Falferi, Giulietto Felici, Giovanni Filatrella, Luca Gennaro Foggetta, Alessandro Gallo, Claudio Gatti, Francesco Giazotto, Gianluca Lamanna, Franco Ligabue, Nadia Ligato, Carlo Ligi, Giovanni Maccarrone, Benno Margesin, Francesco Mattioli, Eugenio Monticone, Luca Oberto , et al. (8 additional authors not shown)

Abstract: The Italian institute for nuclear physics (INFN) has financed the SIMP project (2019-2021) in order to strengthen its skills and technologies in the field of meV detectors with the ultimate aim of develo** a single microwave photon detector. This goal will be pursued by improving the sensitivity and the dark count rate of two types of photodetectors: current biased Josephson Junction (JJ) for th… ▽ More The Italian institute for nuclear physics (INFN) has financed the SIMP project (2019-2021) in order to strengthen its skills and technologies in the field of meV detectors with the ultimate aim of develo** a single microwave photon detector. This goal will be pursued by improving the sensitivity and the dark count rate of two types of photodetectors: current biased Josephson Junction (JJ) for the frequency range 10-50 GHz and Transition Edge Sensor (TES) for the frequency range 30-100 GHz. Preliminary results on materials and devices characterization are presented. △ Less

Submitted 1 July, 2021; originally announced July 2021.

Comments: 7 pages, 4 figures

Journal ref: Journal of Low Temperature Physics (2020) 199:348-354

Linac

Authors: David Alesini

Abstract: A linac (linear accelerator) is a system that allows to accelerate charged particles through a linear trajectory by electromagnetic fields. This kind of accelerator finds several applications in fundamental research and industry. The main devices used to accelerate the particle beam will be introduced in the first part of the paper, while in the second part, the fundamentals of the longitudinal an… ▽ More A linac (linear accelerator) is a system that allows to accelerate charged particles through a linear trajectory by electromagnetic fields. This kind of accelerator finds several applications in fundamental research and industry. The main devices used to accelerate the particle beam will be introduced in the first part of the paper, while in the second part, the fundamentals of the longitudinal and transverse beam dynamics will be highlighted. A short paragraph is finally dedicated to radiofrequency quadrupoles (RFQ). △ Less

Submitted 30 March, 2021; originally announced March 2021.

Comments: 31 pages, contribution to the CAS - the CERN Accelerator School: Introduction to Accelerator Physics

International Workshop on Next Generation Gamma-Ray Source

Authors: C. R. Howell, M. W. Ahmed, A. Afanasev, D. Alesini, J. R. M. Annand, A. Aprahamian, D. L. Balabanski, S. V. Benson, A. Bernstein, C. R. Brune, J. Byrd, B. E. Carlsten, A. E. Champagne, S. Chattopadhyay, D. Davis, E. J. Downie, M. J. Durham, G. Feldman, H. Gao, C. G. R. Geddes, H. W. Griesshammer, R. Hajima, H. Hao, D. Hornidge, J. Isaak , et al. (28 additional authors not shown)

Abstract: A workshop on The Next Generation Gamma-Ray Sources sponsored by the Office of Nuclear Physics at the Department of Energy, was held November 17--19, 2016 in Bethesda, Maryland. The goals of the workshop were to identify basic and applied research opportunities at the frontiers of nuclear physics that would be made possible by the beam capabilities of an advanced laser Compton beam facility. To an… ▽ More A workshop on The Next Generation Gamma-Ray Sources sponsored by the Office of Nuclear Physics at the Department of Energy, was held November 17--19, 2016 in Bethesda, Maryland. The goals of the workshop were to identify basic and applied research opportunities at the frontiers of nuclear physics that would be made possible by the beam capabilities of an advanced laser Compton beam facility. To anchor the scientific vision to realistically achievable beam specifications using proven technologies, the workshop brought together experts in the fields of electron accelerators, lasers, and optics to examine the technical options for achieving the beam specifications required by the most compelling parts of the proposed research programs. An international assembly of participants included current and prospective $γ$-ray beam users, accelerator and light-source physicists, and federal agency program managers. Sessions were organized to foster interactions between the beam users and facility developers, allowing for information sharing and mutual feedback between the two groups. The workshop findings and recommendations are summarized in this whitepaper. △ Less

Submitted 19 December, 2020; originally announced December 2020.

Search for invisible axion dark matter of mass m$_a=43~μ$eV with the QUAX--$aγ$ experiment

Authors: D. Alesini, C. Braggio, G. Carugno, N. Crescini, D. D'Agostino, D. Di Gioacchino, R. Di Vora, P. Falferi, U. Gambardella, C. Gatti, G. Iannone, C. Ligi, A. Lombardi, G. Maccarrone, A. Ortolan, R. Pengo, A. Rettaroli, G. Ruoso, L. Taffarello, S. Tocci

Abstract: A haloscope of the QUAX--$aγ$ experiment composed of an oxygen-free high thermal conductivity-Cu cavity inside an 8.1 T magnet and cooled to $\sim200$ mK is put in operation for the search of galactic axion with mass $m_a\simeq43~μ\text{eV}$. The power emitted by the resonant cavity is amplified with a Josephson parametric amplifier whose noise fluctuations are at the standard quantum limit. With… ▽ More A haloscope of the QUAX--$aγ$ experiment composed of an oxygen-free high thermal conductivity-Cu cavity inside an 8.1 T magnet and cooled to $\sim200$ mK is put in operation for the search of galactic axion with mass $m_a\simeq43~μ\text{eV}$. The power emitted by the resonant cavity is amplified with a Josephson parametric amplifier whose noise fluctuations are at the standard quantum limit. With the data collected in about 1 h at the cavity frequency $ν_c=10.40176$ GHz, the experiment reaches the sensitivity necessary for the detection of galactic QCD-axion, setting the $90\%$ confidence level limit to the axion-photon coupling $g_{aγγ}<0.639\times10^{-13}$ GeV$^{-1}$. △ Less

Submitted 26 May, 2021; v1 submitted 17 December, 2020; originally announced December 2020.

Comments: 7 pages, 6 figures. Analysis method changed. The result is almost left unchanged. Consequently, text has been revised in the Analysis section. Added references. Added equations (2), (4), (5)

Journal ref: Phys. Rev. D 103, 102004 (2021)

Intra-bunch feedback system developments at DAFNE

Authors: Alessandro Drago, INFN-LNF, Frascati, Tor Vergata University, Rome, Italy D. Alesini, S. Caschera, A. Gallo, INFN-LNF, Frascati, Italy J. D. Fox, Stanford University, Stanford, USA J. Cesaratto, J. Dusatko, J. Olsen, C. Rivetta, O. Turgut, SLAC, Menlo Park, USA W. Hofle, G. Iadarola, K. Li, E. Metral, E. Montesinos , et al. (12 additional authors not shown)

Abstract: This paper presents history and evolution of the intra-bunch feedback system for circular accelerators. This pro-ject has been presented by John D. Fox (SLAC/Stanford Un.) at the IPAC2010 held in Kyoto. The idea of the pro-posal is to build a flexible and powerful instrument to mit-igate the parasitic e-cloud effects on the proton (and poten-tially positron) beams in storage rings. Being a new and… ▽ More This paper presents history and evolution of the intra-bunch feedback system for circular accelerators. This pro-ject has been presented by John D. Fox (SLAC/Stanford Un.) at the IPAC2010 held in Kyoto. The idea of the pro-posal is to build a flexible and powerful instrument to mit-igate the parasitic e-cloud effects on the proton (and poten-tially positron) beams in storage rings. Being a new and ambitious project, the financial issues have been quite im-portant. US LHC Accelerator Research Program (LARP) and other institution funding sources have assured the de-velopment of the design for implementing the feedback in the SPS ring at CERN. Here the intra-bunch feedback sys-tem has been installed and tested in the frame of the LIU (LHC Injector Upgrade) program. After the end of the LARP funding, a possible new inter-esting chance to continue the R&D activity, could be by implementing the system in a lepton storage ring affected by e-cloud effects. For achieving this goal, a possible ex-periment could be carried out in the positron ring of DAFNE at Frascati, Italy. The feasibility of the proposal is evaluated in the following sections. In case of approval of the experiment, indeed the project could be inserted in the DAFNE-TF (DAFNE Test Facility) program that is fore-seen after the 2020 for the following 3-5 years. △ Less

Submitted 24 April, 2020; originally announced April 2020.

Comments: 6 pages, 5 figures, Sixth e-cloud workshop, ECLOUD'18 , 3-7 June, 2018, La Biodola (Isola d'Elba ), Italy

Realization of a high quality factor resonator with hollow dielectric cylinders for axion searches

Authors: D. Alesini, C. Braggio, G. Carugno, N. Crescini, D. D' Agostino, D. Di Gioacchino, R. Di Vora, P. Falferi, U. Gambardella, C. Gatti, G. Iannone, C. Ligi, A. Lombardi, G. Maccarrone, A. Ortolan, R. Pengo, C. Pira, A. Rettaroli, G. Ruoso, L. Taffarello, S. Tocci

Abstract: The realization and characterization of a high quality factor resonator composed of two hollow-dielectric cylinders with its pseudo-TM$_{030}$ mode resonating at 10.9 GHz frequency is discussed. The quality factor was measured at the temperatures 300 K and 4 K obtaining $\mbox{Q}_{300\mbox{K}}=(150,000\pm 2,000)$ and $\mbox{Q}_{4\mbox{K}}=(720,000\pm 10,000)$respectively, the latter corresponding… ▽ More The realization and characterization of a high quality factor resonator composed of two hollow-dielectric cylinders with its pseudo-TM$_{030}$ mode resonating at 10.9 GHz frequency is discussed. The quality factor was measured at the temperatures 300 K and 4 K obtaining $\mbox{Q}_{300\mbox{K}}=(150,000\pm 2,000)$ and $\mbox{Q}_{4\mbox{K}}=(720,000\pm 10,000)$respectively, the latter corresponding to a gain of one order of magnitude with respect to a traditional copper cylindrical-cavity with the corresponding TM$_{010}$ mode resonating at the same frequency. The implications to dark-matter axion-searches with cavity experiments are discussed showing that the gain in quality factor is not spoiled by a reduced geometrical coupling $C_{030}$ of the cavity mode to the axion field. This reduction effect is estimated to be at most 20%. Numerical simulations show that frequency tuning of several hundreds MHz is feasible. △ Less

Submitted 28 September, 2020; v1 submitted 6 April, 2020; originally announced April 2020.

High quality factor photonic cavity for dark matter axion searches

Authors: D. Alesini, C. Braggio, G. Carugno, N. Crescini, D. D'Agostino, D. Di Gioacchino, R. Di Vora, P. Falferi, U. Gambardella, C. Gatti, G. Iannone, C. Ligi, A. Lombardi, G. Maccarrone, A. Ortolan, R. Pengo, C. Pira, A. Rettaroli, G. Ruoso, L. Taffarello, S. Tocci

Abstract: Searches for dark matter axion involve the use of microwave resonant cavities operating in a strong magnetic field. Detector sensitivity is directly related to the cavity quality factor, which is limited, however, by the presence of the external magnetic field. In this paper we present a cavity of novel design whose quality factor is not affected by a magnetic field. It is based on a photonic stru… ▽ More Searches for dark matter axion involve the use of microwave resonant cavities operating in a strong magnetic field. Detector sensitivity is directly related to the cavity quality factor, which is limited, however, by the presence of the external magnetic field. In this paper we present a cavity of novel design whose quality factor is not affected by a magnetic field. It is based on a photonic structure by the use of sapphire rods. The quality factor at cryogenic temperature is in excess of $5 \times 10^5$ for a selected mode. △ Less

Submitted 5 February, 2020; originally announced February 2020.

Comments: 6 pages, 7 figures

Journal ref: Review of Scientific Instruments 91, 094701 (2020)

Axion search with a quantum-limited ferromagnetic haloscope

Authors: N. Crescini, D. Alesini, C. Braggio, G. Carugno, D. D Agostino, D. Di Gioacchino, P. Falferi, U. Gambardella, C. Gatti, G. Iannone, C. Ligi, A. Lombardi, A. Ortolan, R. Pengo, G. Ruoso, L. Taffarello

Abstract: A ferromagnetic axion haloscope searches for Dark Matter in the form of axions by exploiting their interaction with electronic spins. It is composed of an axion-to-electromagnetic field transducer coupled to a sensitive rf detector. The former is a photon-magnon hybrid system, and the latter is based on a quantum-limited Josephson parametric amplifier. The hybrid system consists of ten 2.1 mm diam… ▽ More A ferromagnetic axion haloscope searches for Dark Matter in the form of axions by exploiting their interaction with electronic spins. It is composed of an axion-to-electromagnetic field transducer coupled to a sensitive rf detector. The former is a photon-magnon hybrid system, and the latter is based on a quantum-limited Josephson parametric amplifier. The hybrid system consists of ten 2.1 mm diameter YIG spheres coupled to a single microwave cavity mode by means of a static magnetic field. Our setup is the most sensitive rf spin-magnetometer ever realized. The minimum detectable field is $5.5\times10^{-19}\,$T with 9 h integration time, corresponding to a limit on the axion-electron coupling constant $g_{aee}\le1.7\times10^{-11}$ at 95% CL. The scientific run of our haloscope resulted in the best limit on DM-axions to electron coupling constant in a frequency span of about 120 MHz, corresponding to the axion mass range $42.4$-$43.1\,μ$eV. This is also the first apparatus to perform an axion mass scanning by changing the static magnetic field. △ Less

Submitted 24 January, 2020; originally announced January 2020.

Comments: 4 pages, 4 figures

Journal ref: Phys. Rev. Lett. 124, 171801 (2020)

KLASH Conceptual Design Report

Authors: D. Alesini, D. Babusci, P. Beltrame S. J., F. Björkeroth, F. Bossi, P. Ciambrone, G. Delle Monache, D. Di Gioacchino, P. Falferi, A. Gallo, C. Gatti, A. Ghigo, M. Giannotti, G. Lamanna, C. Ligi, G. Maccarrone, A. Mirizzi, D. Montanino, D. Moricciani, A. Mostacci, M. Mück, E. Nardi, F. Nguyen, L. Pellegrino, A. Rettaroli , et al. (4 additional authors not shown)

Abstract: The last decade witnessed an increasing interest in axions and axion-like particles with many theoretical works published and many new experimental proposals that started a real race towards their discovery. This paper is the Conceptual Design Report of the KLASH (KLoe magnet for Axion SearcH) experiment at the Laboratori Nazionali di Frascati (LNF). The idea of this experiment has been stimulated… ▽ More The last decade witnessed an increasing interest in axions and axion-like particles with many theoretical works published and many new experimental proposals that started a real race towards their discovery. This paper is the Conceptual Design Report of the KLASH (KLoe magnet for Axion SearcH) experiment at the Laboratori Nazionali di Frascati (LNF). The idea of this experiment has been stimulated by the availability of the large volume superconducting magnet, with a moderate magnetic field of 0.6 T, used in the KLOE detector at the DAFNE collider. The main conclusion we draw from this report is the possibility to build and put in operation at LNF in 2-3 years a large haloscope with the sensitivity to KSVZ axions in the low mass range between 0.2 and 1 $μ$eV, complementary to that of other experiments. Timeline and cost are competitive with respect to other proposals in the same mass region thanks to the availability of most of the infrastructure, in particular the superconducting magnet and the cryogenics plant. △ Less

Submitted 6 November, 2019; originally announced November 2019.

Report number: INFN-19-18/LNF

Positron driven muon source for a muon collider

Authors: D. Alesini, M. Antonelli, M. E. Biagini, M. Boscolo, O. R. Blanco-García, A. Ciarma, R. Cimino, M. Iafrati, A. Giribono, S. Guiducci, L. Pellegrino, M. Rotondo, C. Vaccarezza, A. Variola, A. Allegrucci, F. Anulli, M. Bauce, F. Collamati, G. Cavoto, G. Cesarini, F. Iacoangeli, R. Li Voti, A. Bacci, I. Drebot, P. Raimondi , et al. (33 additional authors not shown)

Abstract: The design of a future multi-TeV muon collider needs new ideas to overcome the technological challenges related to muon production, cooling, accumulation and acceleration. In this paper a layout of a positron driven muon source known as the Low EMittance Muon Accelerator (LEMMA) concept is presented. The positron beam, stored in a ring with high energy acceptance and low emittance, is extracted an… ▽ More The design of a future multi-TeV muon collider needs new ideas to overcome the technological challenges related to muon production, cooling, accumulation and acceleration. In this paper a layout of a positron driven muon source known as the Low EMittance Muon Accelerator (LEMMA) concept is presented. The positron beam, stored in a ring with high energy acceptance and low emittance, is extracted and driven to a multi-target system, to produce muon pairs at threshold. This solution alleviates the issues related to the power deposited and the integrated Peak Energy Density Deposition (PEDD) on the targets. Muons produced in the multi-target system will then be accumulated before acceleration and injection in the collider. A multi-target line lattice has been designed to cope with the focusing of both the positron and muon beams. Studies on the number, material and thickness of the targets have been carried out. A general layout of the overall scheme and a description is presented, as well as plans for future R&D. △ Less

Submitted 19 May, 2019; v1 submitted 14 May, 2019; originally announced May 2019.

Comments: 18 pages, 32 figures

Galactic axions search with a superconducting resonant cavity

Authors: D. Alesini, C. Braggio, G. Carugno, N. Crescini, D. D'Agostino, D. Di Gioacchino, R. Di Vora, P. Falferi, S. Gallo, U. Gambardella, C. Gatti, G. Iannone, G. Lamanna, C. Ligi, A. Lombardi, R. Mezzena, A. Ortolan, R. Pengo, N. Pompeo, A. Rettaroli, G. Ruoso, E. Silva, C. C. Speake, L. Taffarello, S. Tocci

Abstract: To account for the dark matter content in our Universe, post-inflationary scenarios predict for the QCD axion a mass in the range $(10-10^3)\,μ\mbox{eV}$. Searches with haloscope experiments in this mass range require the monitoring of resonant cavity modes with frequency above 5\,GHz, where several experimental limitations occur due to linear amplifiers, small volumes, and low quality factors of… ▽ More To account for the dark matter content in our Universe, post-inflationary scenarios predict for the QCD axion a mass in the range $(10-10^3)\,μ\mbox{eV}$. Searches with haloscope experiments in this mass range require the monitoring of resonant cavity modes with frequency above 5\,GHz, where several experimental limitations occur due to linear amplifiers, small volumes, and low quality factors of Cu resonant cavities. In this paper we deal with the last issue, presenting the result of a search for galactic axions using a haloscope based on a $36\,\mbox{cm}^3$ NbTi superconducting cavity. The cavity worked at $T=4\,\mbox{K}$ in a 2\,T magnetic field and exhibited a quality factor $Q_0= 4.5\times10^5$ for the TM010 mode at 9\,GHz. With such values of $Q$ the axion signal is significantly increased with respect to copper cavity haloscopes. Operating this setup we set the limit $g_{aγγ}<1.03\times10^{-12}\,\mbox{GeV}^{-1}$ on the axion photon coupling for a mass of about 37\,$μ$eV. A comprehensive study of the NbTi cavity at different magnetic fields, temperatures, and frequencies is also presented. △ Less

Submitted 15 March, 2019; originally announced March 2019.

Journal ref: Phys. Rev. D 99, 101101 (2019)

Low power commissioning of an innovative laser beam circulator for inverse Compton scattering Gamma-ray source

Authors: Cheikh Fall Ndiaye, Kevin Cassou, Patrick Cornebise, Kevin Dupraz, Denis Douillet, Titouan Le Barillec, Christopher Magueur, Aurelien Martens, Daniele Nutarelli, Yann Peinaud, Alice Thiebault, Themis Williams, Fabian Zomer, Nicolas Beaugerard, Bastien Lacrampe, Hervé Rocipon, David Alesini, Fabio Cardelli, Antonio Falone, Giovanni Franzini, Alessandro Gallo, Luca Piersanti, Valerio Petinacci, Stefano Pioli, Alessandro Variola , et al. (2 additional authors not shown)

Abstract: We report on the optical commissioning of the high power laser beam circulator (LBC) for the high brightness Compton γ-ray source Extreme Light Infrastructure for Nuclear Physics. Tests aiming at demonstrating the optical performances of the LBC have been realized with a low-power pulsed laser-beam system and without electron beam. We show that, with the developed alignment and synchronization met… ▽ More We report on the optical commissioning of the high power laser beam circulator (LBC) for the high brightness Compton γ-ray source Extreme Light Infrastructure for Nuclear Physics. Tests aiming at demonstrating the optical performances of the LBC have been realized with a low-power pulsed laser-beam system and without electron beam. We show that, with the developed alignment and synchronization methods coming from the LBC design study presented in the Dupraz et al. paper [1], the LBC enhances the laser-beam power available at the interaction point (IP) by a factor in excess of 25. This corresponds to a potential of bringing the average laser-beam power in excess of 1 kW when the LBC is injected with the interaction point laser-beam pulse energy of 400 mJ at 100 Hz. △ Less

Submitted 16 January, 2019; originally announced January 2019.

Comments: 26 pages, 37 figures

Journal ref: Phys. Rev. Accel. Beams 22, 093501 (2019)

The Compact Linear Collider (CLIC) - 2018 Summary Report

Authors: The CLIC, CLICdp collaborations, :, T. K. Charles, P. J. Giansiracusa, T. G. Lucas, R. P. Rassool, M. Volpi, C. Balazs, K. Afanaciev, V. Makarenko, A. Patapenka, I. Zhuk, C. Collette, M. J. Boland, A. C. Abusleme Hoffman, M. A. Diaz, F. Garay, Y. Chi, X. He, G. Pei, S. Pei, G. Shu, X. Wang, J. Zhang , et al. (671 additional authors not shown)

Abstract: The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the… ▽ More The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years. △ Less

Submitted 6 May, 2019; v1 submitted 14 December, 2018; originally announced December 2018.

Comments: 112 pages, 59 figures; published as CERN Yellow Report Monograph Vol. 2/2018; corresponding editors: Philip N. Burrows, Nuria Catalan Lasheras, Lucie Linssen, Marko Petrič, Aidan Robson, Daniel Schulte, Eva Sicking, Steinar Stapnes

Report number: CERN-2018-005-M

The Klash Proposal: Status and Perspectives

Authors: C. Gatti, D. Alesini, D. Babusci, C. Braggio, G. Carugno, N. Crescini, D. Di Gioacchino, P. Falferi, G. Lamanna, C. Ligi, A. Ortolan, L. Pellegrino, A. Rettaroli, G. Ruoso, S. Tocci

Abstract: Recently some of the authors proposed a search for galactic axions with mass about 0.2~$μ$eV using a large volume resonant cavity, tens of cubic meters, cooled down to 4~K and immersed in a magnetic field of about 0.6~T generated inside the superconducting magnet of the KLOE experiment located at the National Laboratory of Frascati of INFN. This experiment, called KLASH (KLoe magnet for Axion Sear… ▽ More Recently some of the authors proposed a search for galactic axions with mass about 0.2~$μ$eV using a large volume resonant cavity, tens of cubic meters, cooled down to 4~K and immersed in a magnetic field of about 0.6~T generated inside the superconducting magnet of the KLOE experiment located at the National Laboratory of Frascati of INFN. This experiment, called KLASH (KLoe magnet for Axion SearcH), has a potential sensitivity on the axion-to-photon coupling, $g_{aγγ}$, of about $6\times10^{-17}$ $\mbox{GeV}^{-1}$, reaching the region predicted by KSVZ\cite{KSVZ} and DFSZ\cite{DFSZ} models of QCD axions. We report here the status of the project. △ Less

Submitted 16 November, 2018; originally announced November 2018.

Comments: Contributed to the 14th Patras Workshop on Axions, WIMPs and WISPs, DESY in Hamburg, June 18 to 22, 2018

Operation of a ferromagnetic axion haloscope at $m_a=58\,μ$eV

Authors: N. Crescini, D. Alesini, C. Braggio, G. Carugno, D. Di Gioacchino, C. S. Gallo, U. Gambardella, C. Gatti, G. Iannone, G. Lamanna, C. Ligi, A. Lombardi, A. Ortolan, S. Pagano, R. Pengo, G. Ruoso, C. C. Speake, L. Taffarello

Abstract: Axions, originally proposed to solve the strong CP problem of quantum chromodynamics, emerge now as leading candidates of WISP dark matter. The rich phenomenology associated to the light and stable QCD axion can be described as an effective magnetic field that can be experimentally investigated. For the QUAX experiment, dark matter axions are searched by means of their resonant interactions with e… ▽ More Axions, originally proposed to solve the strong CP problem of quantum chromodynamics, emerge now as leading candidates of WISP dark matter. The rich phenomenology associated to the light and stable QCD axion can be described as an effective magnetic field that can be experimentally investigated. For the QUAX experiment, dark matter axions are searched by means of their resonant interactions with electronic spins in a magnetized sample. In principle, axion-induced magnetization changes can be detected by embedding a sample in an rf cavity in a static magnetic field. In this work we describe the operation of a prototype ferromagnetic haloscope, with a sensitivity limited by thermal fluctuations and receiver noise. With a preliminary dark matter search, we are able to set an upper limit on the coupling constant of DFSZ axions to electrons $g_{aee}<4.9\times10^{-10}$ at 95\% C.L. for a mass of $58\,μ$eV (i.\,e. 14\,GHz). This is the first experimental result with an apparatus exploiting the coupling between cosmological axions and electrons. △ Less

Submitted 31 August, 2018; v1 submitted 1 June, 2018; originally announced June 2018.

Comments: 10 pages, 8 figures

Searching for galactic axions through magnetized media: QUAX status report

Authors: G. Ruoso, D. Alesini, C. Braggio, G. Carugno, N. Crescini, D. Di Gioacchino, P. Falferi, S. Gallo, U. Gambardella, C. Gatti, G. Iannone, G. Lamanna, C. Ligi, A. Lombardi, R. Mezzena, A. Ortolan, R. Pengo, C. C. Speake

Abstract: The current status of the QUAX R\&D program is presented. QUAX is a feasibility study for a detection of axion as dark matter based on the coupling to the electrons. The relevant signal is a magnetization change of a magnetic material placed inside a resonant microwave cavity and polarized with a static magnetic field. The current status of the QUAX R\&D program is presented. QUAX is a feasibility study for a detection of axion as dark matter based on the coupling to the electrons. The relevant signal is a magnetization change of a magnetic material placed inside a resonant microwave cavity and polarized with a static magnetic field. △ Less

Submitted 13 February, 2018; originally announced February 2018.

Comments: Contributed to the 13th Patras Workshop on Axions, WIMPs and WISPs, Thessaloniki, May 15 to 19, 2017

Conceptual design of electron beam diagnostics for high brightness plasma accelerator

Authors: A. Cianchi, D. Alesini, M. P. Anania, F. Biagioni, F. Bisesto, E. Chiadroni, A. Curcio, M. Ferrario, F. Filippi, A. Ghigo, A. Giribono, V. Lollo, A. Mostacci, R. Pompili, L. Sabbatini, V. Shpakov, A. Stella, C. Vaccarezza, A. Vannozzi, F. Villa

Abstract: A design study of the diagnostics of a high brightness linac, based on X-band structures, and a plasma accelerator stage, has been delivered in the framework of the EuPRAXIA@SPARC_LAB project. In this paper, we present a conceptual design of the proposed diagnostics, using state of the art systems and new and under development devices. Single shot measurements are preferable for plasma accelerated… ▽ More A design study of the diagnostics of a high brightness linac, based on X-band structures, and a plasma accelerator stage, has been delivered in the framework of the EuPRAXIA@SPARC_LAB project. In this paper, we present a conceptual design of the proposed diagnostics, using state of the art systems and new and under development devices. Single shot measurements are preferable for plasma accelerated beams, including emittance, while $μ$m level and fs scale beam size and bunch length respectively are requested. The needed to separate the driver pulse (both laser or beam) from the witness accelerated bunch imposes additional constrains for the diagnostics. We plan to use betatron radiation for the emittance measurement just at the end of the plasma booster, while other single-shot methods must be proven before to be implemented. Longitudinal measurements, being in any case not trivial for the fs level bunch length, seem to have already a wider range of possibilities. △ Less

Submitted 14 February, 2018; originally announced February 2018.

EUPRAXIA@SPARC_LAB: Beam Dynamics studies for the X-band Linac

Authors: C. Vaccarezza, D. Alesini, A. Bacci, A. Cianchi, E. Chiadroni, M. Croia, M. Diomede, M. Ferrario, A. Gallo, A. Giribono, A. Latina, A. Marocchino, V. Petrillo, R. Pompili, S. Romeo, M. Rossetti Conti, A. R. Rossi, L. Serafini, B. Spataro

Abstract: In the framework of the Eupraxia Design Study an advanced accelerator facility EUPRAXIA@SPARC_LAB has been proposed to be realized at Frascati (Italy) Laboratories of INFN. Two advanced acceleration schemes will be applied, namely an ultimate high gradient 1 GeV X-band linac together with a plasma acceleration stage to provide accelerating gradients of the GeV/m order. A FEL scheme is foreseen to… ▽ More In the framework of the Eupraxia Design Study an advanced accelerator facility EUPRAXIA@SPARC_LAB has been proposed to be realized at Frascati (Italy) Laboratories of INFN. Two advanced acceleration schemes will be applied, namely an ultimate high gradient 1 GeV X-band linac together with a plasma acceleration stage to provide accelerating gradients of the GeV/m order. A FEL scheme is foreseen to produce X-ray beams within 3-10 nm range. A 500-TW Laser system is also foreseen for electron and ion production experiments and a Compton backscattering Interaction is planned together with extraction beamlines at intermediate electron beam energy for neutron beams and THz radiation production. The electron beam dynamics studies in the linac are here presented together with the preliminary machine layout. △ Less

Submitted 30 January, 2018; originally announced January 2018.

Comments: 5 pages, 3 figures, NIM-A proceedings of EAAC2017

EuPRAXIA@SPARC_LAB Design study towards a compact FEL facility at LNF

Authors: M. Ferrario, D. Alesini, M. P. Anania, M. Artioli, A. Bacci, S. Bartocci, R. Bedogni, M. Bellaveglia, A. Biagioni, F. Bisesto, F. Brandi, E. Brentegani, F. Broggi, B. Buonomo, P. L. Campana, G. Campogiani, C. Cannaos, S. Cantarella, F. Cardelli, M. Carpanese, M. Castellano, G. Castorina, N. Catalan Lasheras, E. Chiadroni, A. Cianchi , et al. (95 additional authors not shown)

Abstract: On the wake of the results obtained so far at the SPARC\_LAB test-facility at the Laboratori Nazionali di Frascati (Italy), we are currently investigating the possibility to design and build a new multi-disciplinary user-facility, equipped with a soft X-ray Free Electron Laser (FEL) driven by a $\sim$1 GeV high brightness linac based on plasma accelerator modules. This design study is performed in… ▽ More On the wake of the results obtained so far at the SPARC\_LAB test-facility at the Laboratori Nazionali di Frascati (Italy), we are currently investigating the possibility to design and build a new multi-disciplinary user-facility, equipped with a soft X-ray Free Electron Laser (FEL) driven by a $\sim$1 GeV high brightness linac based on plasma accelerator modules. This design study is performed in synergy with the EuPRAXIA design study. In this paper we report about the recent progresses in the on going design study of the new facility. △ Less

Submitted 26 January, 2018; originally announced January 2018.

Ultra-High Brightness Electron Beams from Very-High Field Cryogenic Radio-frequency Photocathode Sources

Authors: J. B. Rosenzweig, A. Cahill, B. Carlsten, G. Castorina, M. Croia, C. Emma, A. Fukusawa, B. Spataro, D. Alesini, V. Dolgashev, M. Ferrario, G. Lawler, R. Li, C. Limborg, J. Maxson, P. Musumeci, R. Pompili, S. Tantawi, O. Williams

Abstract: Recent investigations of RF copper structures operated at cryogenic temperatures performed by a SLAC-UCLA collaboration have shown a dramatic increase in the maximum surface electric field, to 500 MV/m. We examine use of these fields to enable very high field cryogenic photoinjectors that can attain over an order of magnitude increase in peak electron beam brightness. We present beam dynamics stud… ▽ More Recent investigations of RF copper structures operated at cryogenic temperatures performed by a SLAC-UCLA collaboration have shown a dramatic increase in the maximum surface electric field, to 500 MV/m. We examine use of these fields to enable very high field cryogenic photoinjectors that can attain over an order of magnitude increase in peak electron beam brightness. We present beam dynamics studies relevant to X-ray FEL injectors, using start-to-end simulations that show the high brightness and low emittance of this source enables operation of a compact FEL reaching a photon energy of 80 keV. The preservation of beam brightness in compression, exploiting micro-bunching techniques is discussed. While the gain in brightness at high field is due to increase of the emission current density, further increases in brightness due to lowering of the intrinsic cathode emittance in cryogenic operation are also enabled. While the original proposal for this type of cryogenic, ultra-high field photoinjector has emphasized S-band designs, there are numerous potential advantages that may be conferred by operation in C-band. We examine issues related to experimental implementation in C-band, and expected performance of this type of device in a future hard X-ray FEL such as MaRIE. △ Less

Submitted 20 January, 2018; originally announced January 2018.

Comments: 10 pages, 5 figures, to appear in Proceedings of 2018 European Advanced Accelerator Conference, Nuclear Instruments and Methods

Nano-machining, surface analysis and emittance measurements of a copper photocathode at SPARC_LAB

Authors: J. Scifo, D. Alesini, M. P. Anania, M. Bellaveglia, S. Bellucci, A. Biagioni, F. Bisesto, F. Cardelli, E. Chiadroni, A. Cianchi, G. Costa, D. Di Giovenale, G. Di Pirro, R. Di Raddo, D. H. Dowell, M. Ferrario, A. Giribono, A. Lorusso, F. Micciulla, A. Mostacci, D. Passeri, A. Perrone, L. Piersanti, R. Pompili, V. Shpakov , et al. (3 additional authors not shown)

Abstract: R\&D activity on Cu photocathodes is under development at the SPARC\_LAB test facility to fully characterize each stage of the photocathode "life" and to have a complete overview of the photoemission properties in high brightness photo-injectors. The nano(n)-machining process presented here consists in diamond milling, and blowing with dry nitrogen. This procedure reduces the roughness of the cath… ▽ More R\&D activity on Cu photocathodes is under development at the SPARC\_LAB test facility to fully characterize each stage of the photocathode "life" and to have a complete overview of the photoemission properties in high brightness photo-injectors. The nano(n)-machining process presented here consists in diamond milling, and blowing with dry nitrogen. This procedure reduces the roughness of the cathode surface and prevents surface contamination introduced by other techniques, such as polishing with diamond paste or the machining with oil. Both high roughness and surface contamination cause an increase of intrinsic emittance and consequently a reduction of the overall electron beam brightness. To quantify these effects, we have characterized the photocathode surface in terms of roughness measurement, and morphology and chemical composition analysis by means of Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), and Atomic Force Microscopy (AFM) techniques. The effects of n-machining on the electron beam quality have been also investigated through emittance measurements before and after the surface processing technique. Finally, we present preliminary emittance studies of yttrium thin film on Cu photocathodes. △ Less

Submitted 11 January, 2018; originally announced January 2018.

Preliminary RF design of an X-band linac for the EuPRAXIA@SPARC_LAB project

Authors: M. Diomede, D. Alesini, M. Bellaveglia, B. Buonomo, F. Cardelli, N. Catalan Lasheras, E. Chiadroni, G. Di Pirro, M. Ferrario, A. Gallo, A. Ghigo, A. Giribono, A. Grudiev, L. Piersanti, B. Spataro, C. Vaccarezza, W. Wuensch

Abstract: In the framework of the upgrade of the SPARC_LAB facility at INFN-LNF, named EuPRAXIA@SPARC_LAB, a high gradient linac is foreseen. One of the most suitable options is to realize it in X-band. A preliminary design study of both accelerating structures and power distribution system has been performed. It is based on 0.5 m long travelling wave (TW) accelerating structures operating in the 2π/3 mode… ▽ More In the framework of the upgrade of the SPARC_LAB facility at INFN-LNF, named EuPRAXIA@SPARC_LAB, a high gradient linac is foreseen. One of the most suitable options is to realize it in X-band. A preliminary design study of both accelerating structures and power distribution system has been performed. It is based on 0.5 m long travelling wave (TW) accelerating structures operating in the 2π/3 mode and fed by klystrons and pulse compressor systems. The main parameters of the structures and linac are presented with the basic RF linac layout. △ Less

Submitted 2 January, 2018; originally announced January 2018.

The KLASH Proposal

Authors: David Alesini, Danilo Babusci, Daniele Di Gioacchino, Claudio Gatti, Gianluca Lamanna, Carlo Ligi

Abstract: We propose a search of galactic axions with mass about 0.2 microeV using a large volume resonant cavity, about 50 m^3, cooled down to 4 K and immersed in a moderate axial magnetic field of about 0.6 T generated inside the superconducting magnet of the KLOE experiment located at the National Laboratory of Frascati of INFN. This experiment, called KLASH (KLoe magnet for Axion SearcH) in the followin… ▽ More We propose a search of galactic axions with mass about 0.2 microeV using a large volume resonant cavity, about 50 m^3, cooled down to 4 K and immersed in a moderate axial magnetic field of about 0.6 T generated inside the superconducting magnet of the KLOE experiment located at the National Laboratory of Frascati of INFN. This experiment, called KLASH (KLoe magnet for Axion SearcH) in the following, has a potential sensitivity on the axion-to-photon coupling, g_agg, of about 6x10^-17 GeV-1, reaching the region predicted by KSVZ and DFSZ models of QCD axions. △ Less

Submitted 19 July, 2017; originally announced July 2017.

Report number: INFN-17-14/LNF

Direct measurement of sub-10 fs relativistic electron beams with ultralow emittance

Authors: Jared Maxson, David Cesar, Giacomo Calmasini, Alexander Ody, Pietro Musumeci, David Alesini

Abstract: Ultralow emittance ($\leq20$ nm, normalized) electron beams with $10^5$ electrons per bunch are obtained by tightly focusing an ultrafast ($\sim$ 100 fs) laser pulse on the cathode of a 1.6 cell radiofrequency photoinjector. Taking advantage of the small initial longitudinal emittance, a downstream velocity bunching cavity is used to compress the beam to $<10$ fs rms bunch length. The measurement… ▽ More Ultralow emittance ($\leq20$ nm, normalized) electron beams with $10^5$ electrons per bunch are obtained by tightly focusing an ultrafast ($\sim$ 100 fs) laser pulse on the cathode of a 1.6 cell radiofrequency photoinjector. Taking advantage of the small initial longitudinal emittance, a downstream velocity bunching cavity is used to compress the beam to $<10$ fs rms bunch length. The measurement is performed using a thick high voltage deflecting cavity which is shown to be well-suited to measure ultrashort durations of bunching beams, provided that the beam reaches a ballistic longitudinal focus at the cavity center. △ Less

Submitted 9 March, 2017; v1 submitted 5 November, 2016; originally announced November 2016.

Journal ref: Phys. Rev. Lett. 118, 154802 (2017)

Demonstration of single-shot picosecond time-resolved MeV electron imaging using a compact permanent magnet quadrupole based lens

Authors: D. Cesar, J. Maxson, P. Musumeci, Y. Sun, J. Harrison, P. Frigola, F. H. O'Shea, H. To, D. Alesini, R. K. Li

Abstract: We present the results of an experiment where a short focal length (~ 1.3 cm) permanent magnet electron lens is used to image micron-size features of a metal sample in a single shot, using an ultra- high brightness ps-long 4 MeV electron beam from a radiofrequency photoinjector. Magnifcation ratios in excess of 30x were obtained using a triplet of compact, small gap (3.5 mm), Halbach-style permane… ▽ More We present the results of an experiment where a short focal length (~ 1.3 cm) permanent magnet electron lens is used to image micron-size features of a metal sample in a single shot, using an ultra- high brightness ps-long 4 MeV electron beam from a radiofrequency photoinjector. Magnifcation ratios in excess of 30x were obtained using a triplet of compact, small gap (3.5 mm), Halbach-style permanent magnet quadrupoles with nearly 600 T/m field gradients. These results pave the way to- wards single shot time-resolved electron microscopy and open new opportunities in the applications of high brightness electron beams. △ Less

Submitted 4 April, 2016; originally announced April 2016.

Comments: 5 pages, 6 figures

Journal ref: Phys. Rev. Lett. 117, 024801 (2016)

DAFNE Consolidation Program and Operation with the KLOE-2 Detector

Authors: Catia Milardi, David Alesini, Maria Enrica Biagini, Simone Bini, Manuela Boscolo, Bruno Buonomo, Sergio Cantarella, Antonio De Santis, Giampiero Di Pirro, Giovanni Delle Monache, Alessandro Drago, Luca Foggetta, Oscar Frasciello, Alessandro Gallo, Riccardo Gargana, Andrea Ghigo, Francesco Guatieri, Susanna Guiducci, Franco Iungo, Carlo Ligi, Andrea Michelotti, Luigi Pellegrino, Ruggero Ricci, Ugo Rotundo, Giancarlo Sensolini , et al. (5 additional authors not shown)

Abstract: After a long preparatory phase, including a wide hardware consolidation program, the Italian lepton collider DAFNE, is now systematically delivering data to the KLOE-2 experiment. In approximately 200 days of operation 1 fb-1 has been given to the detector limiting the background to a level compatible with an efficient data acquisition. Instantaneous and maximum daily integrated luminosity measure… ▽ More After a long preparatory phase, including a wide hardware consolidation program, the Italian lepton collider DAFNE, is now systematically delivering data to the KLOE-2 experiment. In approximately 200 days of operation 1 fb-1 has been given to the detector limiting the background to a level compatible with an efficient data acquisition. Instantaneous and maximum daily integrated luminosity measured, so far, are considerably higher with respect to the previous KLOE runs, and are: L(inst) ~ 2.0 1032 cm-2s-1, and L(day) ~ 12.5 pb-1 respectively. A general review concerning refurbishing activities, machine optimization efforts and data taking performances is presented and discussed. △ Less

Submitted 28 September, 2015; originally announced September 2015.

Comments: 19 pages, 13 figures, prepared for the ICFA newsletter67

Technical Design Report EuroGammaS proposal for the ELI-NP Gamma beam System

Authors: O. Adriani, S. Albergo, D. Alesini, M. Anania, D. Angal-Kalinin, P. Antici, A. Bacci, R. Bedogni, M. Bellaveglia, C. Biscari, N. Bliss, R. Boni, M. Boscolo, F. Broggi, P. Cardarelli, K. Cassou, M. Castellano, L. Catani, I. Chaikovska, E. Chiadroni, R. Chiche, A. Cianchi, J. Clarke, A. Clozza, M. Coppola , et al. (84 additional authors not shown)

Abstract: The machine described in this document is an advanced Source of up to 20 MeV Gamma Rays based on Compton back-scattering, i.e. collision of an intense high power laser beam and a high brightness electron beam with maximum kinetic energy of about 720 MeV. Fully equipped with collimation and characterization systems, in order to generate, form and fully measure the physical characteristics of the pr… ▽ More The machine described in this document is an advanced Source of up to 20 MeV Gamma Rays based on Compton back-scattering, i.e. collision of an intense high power laser beam and a high brightness electron beam with maximum kinetic energy of about 720 MeV. Fully equipped with collimation and characterization systems, in order to generate, form and fully measure the physical characteristics of the produced Gamma Ray beam. The quality, i.e. phase space density, of the two colliding beams will be such that the emitted Gamma ray beam is characterized by energy tunability, spectral density, bandwidth, polarization, divergence and brilliance compatible with the requested performances of the ELI-NP user facility, to be built in Romania as the Nuclear Physics oriented Pillar of the European Extreme Light Infrastructure. This document illustrates the Technical Design finally produced by the EuroGammaS Collaboration, after a thorough investigation of the machine expected performances within the constraints imposed by the ELI-NP tender for the Gamma Beam System (ELI-NP-GBS), in terms of available budget, deadlines for machine completion and performance achievement, compatibility with lay-out and characteristics of the planned civil engineering. △ Less

Submitted 14 July, 2014; originally announced July 2014.

Daφne gamma-rays factory

Authors: D. Alesini, I. Chaikovska, A. Variola, S. Guiducci, F. Zomer, C. Milardi, M. Zobov

Abstract: Gamma sources with high flux and spectral densities are the main requirements for new nuclear physics experiments to be performed in several worldwide laboratories and envisaged in the ELI-NP (Extreme Light Infrastructure-Nuclear Physics) project or in the IRIDE (Interdisciplinary Research Infrastructure with Dual Electron Linacs) proposals. The paper is focalized on an experiment of gamma photons… ▽ More Gamma sources with high flux and spectral densities are the main requirements for new nuclear physics experiments to be performed in several worldwide laboratories and envisaged in the ELI-NP (Extreme Light Infrastructure-Nuclear Physics) project or in the IRIDE (Interdisciplinary Research Infrastructure with Dual Electron Linacs) proposals. The paper is focalized on an experiment of gamma photons production using Compton collisions between the DAΦNE electron beam and a high average power laser pulse, amplified in a Fabry-Pérot optical resonator. The calculations show that the resulting gamma beam source has extremely interesting properties in terms of spectral density, energy spread and gamma flux comparable (and even better) with the last generation gamma sources. The energy of the gamma beam depends on the adopted laser wavelength and can be tuned changing the energy of the electron ring. In particular we have analyzed the case of a gamma factory tunable in the 2-9 MeV range. The main parameters of this new facility are presented and the perturbation on the transverse and longitudinal electron beam dynamics is discussed. A preliminary accelerator layout to allow experiments with the gamma beam is presented with a first design of the accelerator optics. △ Less

Submitted 5 May, 2014; originally announced May 2014.

Comments: 26 pages, 15 figures

Report number: INFN-14-07/LNF, Published by SIDS--Pubblicazioni, Laboratori Nazionali di Frascati

IRIDE White Book, An Interdisciplinary Research Infrastructure based on Dual Electron linacs&lasers

Authors: D. Alesini, M. Alessandroni, M. P. Anania, S. Andreas, M. Angelone, A. Arcovito, F. Arnesano, M. Artioli, L. Avaldi, D. Babusci, A. Bacci, A. Balerna, S. Bartalucci, R. Bedogni, M. Bellaveglia, F. Bencivenga, M. Benfatto, S. Biedron, V. Bocci, M. Bolognesi, P. Bolognesi, R. Boni, R. Bonifacio, M. Boscolo, F. Boscherini , et al. (189 additional authors not shown)

Abstract: This report describes the scientific aims and potentials as well as the preliminary technical design of IRIDE, an innovative tool for multi-disciplinary investigations in a wide field of scientific, technological and industrial applications. IRIDE will be a high intensity 'particle factory', based on a combination of a high duty cycle radio-frequency superconducting electron linac and of high ener… ▽ More This report describes the scientific aims and potentials as well as the preliminary technical design of IRIDE, an innovative tool for multi-disciplinary investigations in a wide field of scientific, technological and industrial applications. IRIDE will be a high intensity 'particle factory', based on a combination of a high duty cycle radio-frequency superconducting electron linac and of high energy lasers. Conceived to provide unique research possibilities for particle physics, for condensed matter physics, chemistry and material science, for structural biology and industrial applications, IRIDE will open completely new research possibilities and advance our knowledge in many branches of science and technology. IRIDE will contribute to open new avenues of discoveries and to address most important riddles: What does matter consist of? What is the structure of proteins that have a fundamental role in life processes? What can we learn from protein structure to improve the treatment of diseases and to design more efficient drugs? But also how does an electronic chip behave under the effect of radiations? How can the heat flow in a large heat exchanger be optimized? The scientific potential of IRIDE is far reaching and justifies the construction of such a large facility in Italy in synergy with the national research institutes and companies and in the framework of the European and international research. It will impact also on R&D work for ILC, FEL, and will be complementarity to other large scale accelerator projects. IRIDE is also intended to be realized in subsequent stages of development depending on the assigned priorities. △ Less

Submitted 30 July, 2013; originally announced July 2013.

Comments: 270 pages

TE Wave Measurement and Modeling

Authors: John P. Sikora, Robert M. Schwartz, Kiran G. Sonnad, David Alesini, Stefano De Santis

Abstract: In the TE wave method, microwaves are coupled into the beam-pipe and the effect of the electron cloud on these microwaves is measured. An electron cloud (EC) density can then be calculated from this measurement. There are two analysis methods currently in use. The first treats the microwaves as being transmitted from one point to another in the accelerator. The second more recent method, treats th… ▽ More In the TE wave method, microwaves are coupled into the beam-pipe and the effect of the electron cloud on these microwaves is measured. An electron cloud (EC) density can then be calculated from this measurement. There are two analysis methods currently in use. The first treats the microwaves as being transmitted from one point to another in the accelerator. The second more recent method, treats the beam-pipe as a resonant cavity. This paper will summarize the reasons for adopting the resonant TE wave analysis as well as give examples from CESRTA and DAΦNE of resonant beam-pipe. The results of bead-pull bench measurements will show some possible standing wave patterns, including a cutoff mode (evanescent) where the field decreases exponentially with distance from the drive point. We will outline other recent developments in the TE wave method including VORPAL simulations of microwave resonances, as well as the simulation of transmission in the presence of both an electron cloud and magnetic fields. △ Less

Submitted 16 July, 2013; originally announced July 2013.

Comments: Presented at ECLOUD'12: Joint INFN-CERN-EuCARD-AccNet Workshop on Electron-Cloud Effects, La Biodola, Isola d'Elba, Italy, 5-9 June 2012; CERN-2013-002, pp. 193-200

Operating experience with electron cloud clearing electrodes at DAFNE

Authors: M. Zobov, D. Alesini, A. Drago, A. Gallo, S. Guiducci, C. Milardi, A. Stella, S. De Santis, T. Demma, P. Raimondi

Abstract: During the current run of an electron-positron collider DAFNE special electrodes for electron cloud suppression have been inserted in all dipole and wiggler magnets of the positron ring. In this paper we discuss the impact of these electrodes on beam dynamics and overall collider performance. In particular we report results of measurements such as e-cloud instabilities growth rate, transverse beam… ▽ More During the current run of an electron-positron collider DAFNE special electrodes for electron cloud suppression have been inserted in all dipole and wiggler magnets of the positron ring. In this paper we discuss the impact of these electrodes on beam dynamics and overall collider performance. In particular we report results of measurements such as e-cloud instabilities growth rate, transverse beam size variation, tune shifts along the bunch train etc. with the electrodes switched on and off that clearly indicate the effectiveness of the electrodes for e-cloud suppression. △ Less

Submitted 25 June, 2013; originally announced June 2013.

Comments: presented at ECLOUD'12: Joint INFN-CERN-EuCARD-AccNet Workshop on Electron-Cloud Effects, La Biodola, Isola d'Elba, Italy, 5-9 June 2012

Journal ref: CERN-2013-002, pp. 259-265

Mitigation and control of instabilities in DAFNE positron ring

Authors: Alessandro Drago, David Alesini, Theo Demma, Alessandro Gallo, Susanna Guiducci, Catia Milardi, Pantaleo Raimondi, Mikhail Zobov

Abstract: The positron beam in the DAFNE e+/e- collider has always been suffering from strong e-cloud instabilities. In order to cope with them, several approaches have been adopted along the years: flexible and powerful bunch-by-bunch feedback systems, solenoids around the straight sections of the vacuum chamber and, in the last runs, e-cloud clearing electrodes inside the bending and wiggler magnets. Of c… ▽ More The positron beam in the DAFNE e+/e- collider has always been suffering from strong e-cloud instabilities. In order to cope with them, several approaches have been adopted along the years: flexible and powerful bunch-by-bunch feedback systems, solenoids around the straight sections of the vacuum chamber and, in the last runs, e-cloud clearing electrodes inside the bending and wiggler magnets. Of course classic diagnostics tools have been used to evaluate the effectiveness of the adopted measures and the correct setup of the devices, in order to acquire total beam and bunch-by-bunch currents, to plot in real time synchrotron and betatron instabilities, to verify the vertical beam size enlargement in collision and out of collision. Besides, to evaluate the efficacy of the solenoids and of the clearing electrodes versus the instability speed, the more powerful tools have been the special diagnostics routines making use of the bunch-by-bunch feedback systems to quickly compute the growth rate instabilities and the bunch-by-bunch tune spread in different beam conditions. △ Less

Submitted 23 April, 2012; originally announced April 2012.

Comments: 3 pages, 5 figures, BIW'2012 proceedings

Power coupling

Authors: D. Alesini

Abstract: Power coupling is the subject of a huge amount of literature and material since for each particular RF structure it is necessary to design a coupler that satisfies some requirements, and several approaches are in principle possible. The choice of one coupler with respect to another depends on the particular RF design expertise. Nevertheless some 'design criteria' can be adopted and the scope of th… ▽ More Power coupling is the subject of a huge amount of literature and material since for each particular RF structure it is necessary to design a coupler that satisfies some requirements, and several approaches are in principle possible. The choice of one coupler with respect to another depends on the particular RF design expertise. Nevertheless some 'design criteria' can be adopted and the scope of this paper is to give an overview of the basic concepts in power coupler design and techniques. We illustrate both the cases of normal-conducting and superconducting structures as well as the cases of standing-wave and travelling-wave structures. Problems related to field distortion induced by couplers, pulsed heating, and multipacting are also addressed. Finally a couple of design techniques using electromagnetic codes are illustrated. The paper brings together pictures, data, and information from several works reported in the references and I would like to thank all the authors of the papers. △ Less

Submitted 14 December, 2011; originally announced December 2011.

Comments: 23 pages, contribution to the CAS - CERN Accelerator School: Specialised Course on RF for Accelerators; 8 - 17 Jun 2010, Ebeltoft, Denmark

Journal ref: CERN Yellow Report CERN-2011-007, pp. 125-147

Proposal for taking data with the KLOE-2 detector at the DA$Φ$NE collider upgraded in energy

Authors: D. Babusci, C. Bini, F. Bossi, G. Isidori, D. Moricciani, F. Nguyen, P. Raimondi, G. Venanzoni, D. Alesini, F. Archilli, D. Badoni, R. Baldini-Ferroli, M. Bellaveglia, G. Bencivenni, M. Bertani, M. Biagini, C. Biscari, C. Bloise, V. Bocci, R. Boni, M. Boscolo, P. Branchini, A. Budano, S. A. Bulychjev, B. Buonomo , et al. (97 additional authors not shown)

Abstract: This document reviews the physics program of the KLOE-2 detector at DA$Φ$NE upgraded in energy and provides a simple solution to run the collider above the $φ$-peak (up to 2, possibly 2.5 GeV). It is shown how a precise measurement of the multihadronic cross section in the energy region up to 2 (possibly 2.5) GeV would have a major impact on the tests of the Standard Model through a precise determ… ▽ More This document reviews the physics program of the KLOE-2 detector at DA$Φ$NE upgraded in energy and provides a simple solution to run the collider above the $φ$-peak (up to 2, possibly 2.5 GeV). It is shown how a precise measurement of the multihadronic cross section in the energy region up to 2 (possibly 2.5) GeV would have a major impact on the tests of the Standard Model through a precise determination of the anomalous magnetic moment of the muon and the effective fine-structure constant at the $M_Z$ scale. With a luminosity of about $10^{32}$cm$^{-2}$s$^{-1}$, DA$Φ$NE upgraded in energy can perform a scan in the region from 1 to 2.5 GeV in one year by collecting an integrated luminosity of 20 pb$^{-1}$ (corresponding to a few days of data taking) for single point, assuming an energy step of 25 MeV. A few years of data taking in this region would provide important tests of QCD and effective theories by $γγ$ physics with open thresholds for pseudo-scalar (like the $η'$), scalar ($f_0,f'_0$, etc...) and axial-vector ($a_1$, etc...) mesons; vector-mesons spectroscopy and baryon form factors; tests of CVC and searches for exotics. In the final part of the document a technical solution for the energy upgrade of DA$Φ$NE is proposed. △ Less

Submitted 29 July, 2010; originally announced July 2010.

Comments: 19 pages, 8 figures

Report number: LNF-10/17(P)

Da$Φ$ne developments for the KLOE-2 experimental run

Authors: C. Milardi, D. Alesini, M. E. Biagini, C. Biscari, R. Boni, M. Boscolo, F. Bossi, B. Buonomo, A. Clozza, G. Delle Monache, T. Demma, E. Di Pasquale, G. Di Pirro, A. Drago, M. Esposito, A. Gallo, A. Ghigo, S. Guiducci, C. Ligi, F. Marcellini, G. Mazzitelli, L. Pellegrino, M. Preger, L. Quintieri, P. Raimondi , et al. (16 additional authors not shown)

Abstract: Recently the peak luminosity achieved on the DAΦNE collider has been improved by almost a factor three by implementing a novel collision scheme based on large Piwinski angle and Crab-Waist. This encouraging result opened new perspectives for physics research and a new run with the KLOE-2 detector has been scheduled to start by spring 2010. The KLOE-2 installation is a complex operation requiring a… ▽ More Recently the peak luminosity achieved on the DAΦNE collider has been improved by almost a factor three by implementing a novel collision scheme based on large Piwinski angle and Crab-Waist. This encouraging result opened new perspectives for physics research and a new run with the KLOE-2 detector has been scheduled to start by spring 2010. The KLOE-2 installation is a complex operation requiring a careful design effort and a several months long shutdown. The high luminosity interaction region has been deeply revised in order to take into account the effect on the beam caused by the solenoidal field of the experimental detector and to ensure background rejection. The shutdown has been also used to implement several other modifications aimed at improving beam dynamics: the wiggler poles have been displaced from the magnet axis in order to cancel high order terms in the field, the feedback systems have been equipped with stronger power supplies and more efficient kickers and electrodes have been inserted inside the wiggler and the dipole vacuum chambers, in the positron ring, to avoid the e-cloud formation. A low level RF feedback has been added to the cavity control in both rings. △ Less

Submitted 8 June, 2010; originally announced June 2010.

Comments: 3 pages, 3 figures, presented to the IPAC10 conference

Dafne Lifetime Optimization with Compensating Wires and Octupoles

Authors: C. Milardi, D. Alesini, M. A. Preger, P. Raimondi, M. Zobov, D. Shatilov

Abstract: Long-range beam-beam interactions (parasitic crossings) were one of the main luminosity performance limitations for the lepton F-factory DAFNE in its original configuration. In particular, the parasitic crossings led to a substantial lifetime reduction of both beams in collision. This puts a limit on the maximum storable current and, as a consequence, on the achievable peak and integrated lumino… ▽ More Long-range beam-beam interactions (parasitic crossings) were one of the main luminosity performance limitations for the lepton F-factory DAFNE in its original configuration. In particular, the parasitic crossings led to a substantial lifetime reduction of both beams in collision. This puts a limit on the maximum storable current and, as a consequence, on the achievable peak and integrated luminosity. In order to mitigate the problem, numerical and experimental studies of the parasitic crossings compensation by current-carrying wires have been done. During the operation for the KLOE experiment two such wires have been installed at both ends of the interaction region. They produced a relevant improvement in the lifetime of the weak beam (positrons) at the maximum current of the strong one (electrons) without luminosity loss, in agreement with the numerical predictions. The same compensating mechanism has been adopted during the run for the FINUDA experiment as well, with less evident benefits than in the previous case. The interplay between nonlinearities originating from the beam-beam interaction and the ring lattice has been studied by theoretical simulation and experimental measurements. Compensation procedures have been set up relying on the electromagnetic octupoles installed on both rings and used in addition to wire compensation. In this paper the parasitic crossings effects in the DAFNE interaction regions and their compensation by wires and octupoles are described. A detailed theoretical analysis of the interplay about different non-linearities is presented; eventually experimental measurements and observations are discussed. △ Less

Submitted 8 April, 2008; v1 submitted 11 March, 2008; originally announced March 2008.

Comments: 6 pages, 11 figures, invited talk to CARE-HHH-APD IR'07 Workshop, Frascati, 7-9 November 2007, the previous two papers submitted with the same title had errors in the author list and in the comments

Wire Compensation of Parasitic Crossings in DAFNE

Authors: C. Milardi, D. Alesini, M. A. Preger, P. Raimondi, M. Zobov, D. Shatilov

Abstract: Long-range beam-beam interactions (parasitic crossings) are one of the main luminosity performance limitations for the Frascati e+e- Phi-factory DAFNE. In particular, the parasitic crossings lead to a substantial lifetime reduction of both beams in collision. This puts a limit on the maximum storable current and, as a consequence, on the achievable peak and integrated luminosity. In order to all… ▽ More Long-range beam-beam interactions (parasitic crossings) are one of the main luminosity performance limitations for the Frascati e+e- Phi-factory DAFNE. In particular, the parasitic crossings lead to a substantial lifetime reduction of both beams in collision. This puts a limit on the maximum storable current and, as a consequence, on the achievable peak and integrated luminosity. In order to alleviate the problem numerical and experimental studies of the parasitic crossings compensation with current-carrying wires have been performed at DAFNE. Two such wires have been installed at both ends of the KLOE interaction region. Switching on the wires in agreement with the numerical predictions, improvement in the lifetime of the 'weak' beam (positrons) has been obtained at the maximum current of the 'strong' one (electrons) without luminosity loss. In this paper we describe the parasitic crossings effects in DAFNE, summarize the results of numerical simulations on their compensation with the wires and discuss the experimental measurements and observations. △ Less

Submitted 13 July, 2006; originally announced July 2006.

Comments: Poster presented to European Particle Accelerator Conference (EPAC'06), Edinburgh, Scotland, 26-30 June 2006

Journal ref: Conf.Proc.C060626:2808-2810,2006

DAFNE Experience with Negative Momentum Compaction

Authors: M. Zobov, D. Alesini, M. E. Biagini, A. Drago, A. Gallo, C. Milardi, P. Raimondi, B. Spataro, A. Stella

Abstract: There are several potential advantages for a collider operation with a lattice with negative momentum compaction factor (alfa). Since the lattice of the Frascati e+e- Phi-factory DAFNE is flexible enough to provide collider operation even with alfa < 0, we have exploited this possibility for an experimental study of the beam dynamics. The negative momentum compaction lattices have been successfu… ▽ More There are several potential advantages for a collider operation with a lattice with negative momentum compaction factor (alfa). Since the lattice of the Frascati e+e- Phi-factory DAFNE is flexible enough to provide collider operation even with alfa < 0, we have exploited this possibility for an experimental study of the beam dynamics. The negative momentum compaction lattices have been successfully implemented and stable 1 A currents have been stored in both electron and positron rings without any problem for RF cavities and feedback systems operation. First collisions have been tested at low currents. In this paper we describe the experimental results and compare them with expectations and numerical simulations. Present limitations to DAFNE operation with alfa < 0 and ways to overcome them are also discussed. △ Less

Submitted 5 July, 2006; originally announced July 2006.

Comments: Talk given at 10th European Particle Accelerator Conference (EPAC06), Edinburgh, UK 26-30 June 2006

Journal ref: Conf.Proc.C060626:989-991,2006

Design considerations for future DAFNE upgrade

Authors: D. Alesini, G. Benedetti, M. E. Biagini, C. Biscari, R. Boni, M. Boscolo, A. Clozza, G. Delle Monache, G. Di Pirro, A. Drago, A. Gallo, A. Ghigo, S. Guiducci, M. Incurvati, E. Levichev, C. Ligi, F. Marcellini, G. Mazzitelli, C. Milardi, L. Pellegrino, M. A. Preger, P. Raimondi, R. Ricci, U. Rotundo, C. Sanelli , et al. (10 additional authors not shown)

Abstract: The Frascati F-Factory DAFNE has been delivering luminosity to the KLOE, DEAR and FINUDA experiments since year 2000. Since April 2004 the KLOE run has been resumed and recently peak luminosity of 1.0x1032 cm-2s-1 and integrated luminosity of 6.2 pb-1/day have been achieved. The scientific program of the three high-energy experiments sharing DAFNE operation will be completed approximately by the… ▽ More The Frascati F-Factory DAFNE has been delivering luminosity to the KLOE, DEAR and FINUDA experiments since year 2000. Since April 2004 the KLOE run has been resumed and recently peak luminosity of 1.0x1032 cm-2s-1 and integrated luminosity of 6.2 pb-1/day have been achieved. The scientific program of the three high-energy experiments sharing DAFNE operation will be completed approximately by the end of year 2006. A scientific program for DAFNE beyond that date has not been defined yet and it is matter of discussion in the high-energy physics and accelerator physics communities. In this paper we present some future scenarios for DAFNE, discussing the expected ultimate performances of the machine as it is now and addressing the design for an energy and/or luminosity upgrade. The options presented in the following are not exhaustive and they are intended to give a glance of what is doable using the existing infrastructures. △ Less

Submitted 17 November, 2004; originally announced November 2004.

Comments: Presented at the Workshop "DAFNE 2004: Physics at meson factories", 7-14 June 2004, LNF INFN, Frascati, Italy

Journal ref: Frascati Phys.Ser.36:475-484,2005

DAFNE operation with the FINUDA experiment

Authors: C. Milardi, D. Alesini, G. Benedetti, M. E. Biagini, C. Biscari, R. Boni, M. Boscolo, A. Clozza, D. Delle Monache, G. Di Pirro, A. Drago, A. Gallo, A. Ghigo, S. Guiducci, M. Incurvati, C. Ligi, F. Marcellini, G. Mazzitelli, L. Pellegrino, M. A. Preger, P. Raimondi, R. Ricci, U. Rotundo, C. Sanelli, M. Serio , et al. (7 additional authors not shown)

Abstract: DAFNE operation restarted in September 2003, after a six month shut-down for the installation of FINUDA, a magnetic detector dedicated to the study of hypernuclear physics. FINUDA is the third experiment running on DAFNE and operates while kee** on place the other detector KLOE. During the shut-down both Interaction Regions have been equipped with remotely controlled quadrupoles in order to op… ▽ More DAFNE operation restarted in September 2003, after a six month shut-down for the installation of FINUDA, a magnetic detector dedicated to the study of hypernuclear physics. FINUDA is the third experiment running on DAFNE and operates while kee** on place the other detector KLOE. During the shut-down both Interaction Regions have been equipped with remotely controlled quadrupoles in order to operate at different solenoid fields. Among many other hardware upgrades one of the most significant is the resha** of the wiggler pole profile to improve the field quality and the machine dynamic aperture. Commissioning of the collider in the new configuration has been completed in short time. The peak luminosity delivered to FINUDA has reached 6 10^31 s-1cm-2, with a daily integrated value close to 4 pb-1. △ Less

Submitted 16 August, 2004; originally announced August 2004.

Comments: 3 pages, 4 figures

DAFNE

Authors: S. Guiducci, D. Alesini, G. Benedetti, M. E. Biagini, C. Biscari, R. Boni, M. Boscolo, A. Clozza, G. Delle Monache, G. Di Pirro, A. Drago, A. Gallo, A. Ghigo, F. Marcellini, G. Mazzitelli, C. Milardi, L. Pellegrino, M. A. Preger, P. Raimondi, R. Ricci, C. Sanelli, M. Serio, F. Sgamma, A. Stecchi, C. Vaccarezza , et al. (1 additional authors not shown)

Abstract: The results of 2002 DAFNE operation for the two experiments KLOE and DEAR are described. During 2003 a long shutdown has been dedicated to the installation of new Interaction Regions (IR) and to hardware modifications and upgrades. In the last section optics studies and performances expectations for the new machine configuration are reported. The results of 2002 DAFNE operation for the two experiments KLOE and DEAR are described. During 2003 a long shutdown has been dedicated to the installation of new Interaction Regions (IR) and to hardware modifications and upgrades. In the last section optics studies and performances expectations for the new machine configuration are reported. △ Less

Submitted 25 May, 2004; v1 submitted 1 March, 2004; originally announced March 2004.

Comments: Invited talk at the Workshop on e+e- in the 1-2 GeV range, Alghero, Italy, September 2003 (eConf C0309101)

Journal ref: ECONFC0309101:WEPL003,2003