-
Validating an algebraic approach to characterizing resonator networks
Authors:
Viva R. Horowitz,
Brittany Carter,
Uriel Hernandez,
Trevor Scheuing,
Benjamín J. Alemán
Abstract:
Resonator networks are ubiquitous in natural and engineered systems, such as solid-state materials, neural tissue, and electrical circuits. To understand and manipulate these networks, it is essential to characterize their building blocks, which include the mechanical analogs of mass, elasticity, dam**, and coupling of each resonator element. While these mechanical parameters are typically obtai…
▽ More
Resonator networks are ubiquitous in natural and engineered systems, such as solid-state materials, neural tissue, and electrical circuits. To understand and manipulate these networks, it is essential to characterize their building blocks, which include the mechanical analogs of mass, elasticity, dam**, and coupling of each resonator element. While these mechanical parameters are typically obtained from response spectra using least-squares fitting, this approach requires a priori knowledge of all parameters and is susceptible to large error due to convergence to local minima. Here we validate an alternative algebraic means to characterize resonator networks with no or minimal a priori knowledge. Our approach recasts the equations of motion of the network into a linear homogeneous algebraic equation and solves the equation with a set of discrete measured network response vectors. For validation, we employ our approach on noisy simulated data from a single resonator and a coupled resonator pair, and we characterize the accuracy of the recovered parameters using high-dimension factorial simulations. Generally, we find that the error is inversely proportional to the signal-to-noise ratio, that measurements at two frequencies are sufficient to recover all parameters, and that sampling near the resonant peaks is optimal. Our simple, powerful tool will enable future efforts to ascertain network properties and control resonator networks.
△ Less
Submitted 2 June, 2023;
originally announced June 2023.
-
Spatial map** and analysis of graphene nanomechanical resonator networks
Authors:
Brittany Carter,
Viva R. Horowitz,
Uriel Hernandez,
David J. Miller,
Andrew Blaikie,
Benjamín J. Alemán
Abstract:
Nanoelectromechanical (NEMS) resonator networks have drawn increasing interest due to their potential applications in emergent behavior, sensing, phononics, and mechanical information processing. A challenge toward realizing these large-scale networks is the ability to controllably tune and reconfigure the collective, macroscopic properties of the network, which relies directly on the development…
▽ More
Nanoelectromechanical (NEMS) resonator networks have drawn increasing interest due to their potential applications in emergent behavior, sensing, phononics, and mechanical information processing. A challenge toward realizing these large-scale networks is the ability to controllably tune and reconfigure the collective, macroscopic properties of the network, which relies directly on the development of methods to characterize the constituent NEMS resonator building blocks and their coupling. In this work, we demonstrate a scalable optical technique to spatially map graphene NEMS networks and read out the fixed-frequency collective response as a single vector. Using the response vectors, we introduce an efficient algebraic approach to quantify the site-specific elasticity, mass, dam**, and coupling parameters of network clusters. We apply this technique to accurately characterize single uncoupled resonators and coupled resonator pairs by sampling them at just two frequencies, and without the use of curve fitting or the associated a priori parameter estimates. Our technique may be applied to a range of classical and quantum resonator systems and fills in a vital gap for programming NEMS networks.
△ Less
Submitted 7 February, 2023;
originally announced February 2023.
-
Non-volatile rewritable frequency tuning of a nanoelectromechanical resonator using photoinduced do**
Authors:
David J. Miller,
Andrew Blaikie,
Benjamin J. Aleman
Abstract:
Tuning the frequency of a resonant element is of vital importance in both the macroscopic world, such as when tuning a musical instrument, as well as at the nanoscale. In particular, precisely controlling the resonance frequency of isolated nanoelectromechanical resonators (NEMS) has enabled innovations such as tunable mechanical filtering and mixing as well as commercial technologies such as robu…
▽ More
Tuning the frequency of a resonant element is of vital importance in both the macroscopic world, such as when tuning a musical instrument, as well as at the nanoscale. In particular, precisely controlling the resonance frequency of isolated nanoelectromechanical resonators (NEMS) has enabled innovations such as tunable mechanical filtering and mixing as well as commercial technologies such as robust timing oscillators. Much like their electronic device counterparts, the potential of NEMS grows when they are built up into large-scale arrays. Such arrays have enabled neutral-particle mass spectroscopy and have been proposed for ultralow-power alternatives to traditional analog electronics as well as nanomechanical information technologies like memory, logic, and computing. A fundamental challenge to these applications is to precisely tune the vibrational frequency and coupling of all resonators in the array, since traditional tuning methods, like patterned electrostatic gating or dielectric tuning, become intractable when devices are densely packed. Here, we demonstrate a persistent, rewritable, scalable, and high-speed frequency tuning method for graphene-based NEMS. Our method uses a focused laser and two shared electrical contacts to photodope individual resonators by simultaneously applying optical and electrostatic fields. After the fields are removed, the trapped charge created by this process persists and applies a local electrostatic tension to the resonators, tuning their frequencies. By providing a facile means to locally address the strain of a NEMS resonator, this approach lays the groundwork for fully programmable large-scale NEMS lattices and networks.
△ Less
Submitted 4 December, 2019; v1 submitted 20 August, 2019;
originally announced August 2019.
-
A fast, sensitive, room-temperature graphene nanomechanical bolometer
Authors:
Andrew Blaikie,
David Miller,
Benjamín J. Alemán
Abstract:
Bolometers are a powerful and vital means of detecting light in the IR to THz frequencies, and they have been adopted for a range of uses from astronomical observation to thermal imaging. As uses diversify, there is an increasing demand for faster, more sensitive room-temperature bolometers. To this end, graphene has generated interest because of its miniscule heat capacity and its intrinsic ultra…
▽ More
Bolometers are a powerful and vital means of detecting light in the IR to THz frequencies, and they have been adopted for a range of uses from astronomical observation to thermal imaging. As uses diversify, there is an increasing demand for faster, more sensitive room-temperature bolometers. To this end, graphene has generated interest because of its miniscule heat capacity and its intrinsic ultra-broadband absorption, properties that would allow it to quickly detect low levels of light of nearly any wavelength. Yet, graphene has disappointed its expectations in traditional electrical bolometry at room temperature, because of its weakly temperature-dependent resistivity and exceptionally high thermal conductivity. Here, we overcome these challenges with a new approach that detects light by tracking the resonance frequency of a graphene nanomechanical resonator. The absorbed light heats up and thermally tensions the resonator, thereby changing its frequency. Using this approach, we achieve a room-temperature noise-equivalent power of 7 pW/Hz^1/2, a value 100 times more sensitive than electrical graphene bolometers, and speeds (1.3 MHz) that greatly surpass state-of-the-art microbolometers.
△ Less
Submitted 31 October, 2018;
originally announced October 2018.
-
Three-dimensional localization of spins in diamond using 12C implantation
Authors:
Kenichi Ohno,
F. Joseph Heremans,
Charles F. de las Casas,
Bryan. A. Myers,
Benjamín J. Aleman,
Ania C. Bleszynski Jayich,
David D. Awschalom
Abstract:
We demonstrate three-dimensional localization of a single nitrogen-vacancy (NV) center in diamond by combining nitrogen do** during growth with a post-growth 12C implantation technique that facilitates vacancy formation in the crystal. We show that the NV density can be controlled by the implantation dose without necessitating increase of the nitrogen incorporation. By implanting a large 12C dos…
▽ More
We demonstrate three-dimensional localization of a single nitrogen-vacancy (NV) center in diamond by combining nitrogen do** during growth with a post-growth 12C implantation technique that facilitates vacancy formation in the crystal. We show that the NV density can be controlled by the implantation dose without necessitating increase of the nitrogen incorporation. By implanting a large 12C dose through nanoscale apertures, we can localize an individual NV center within a volume of (~180 nm)**3 at a deterministic position while reproducibly preserving a coherence time (T2) > 300 μs. Our approach enables integration of NV centers into diamond nanostructures to realize scalable spin-sensing devices as well as coherent spin coupling mediated by photons and phonons.
△ Less
Submitted 28 May, 2014;
originally announced May 2014.
-
Electron spin resonance of nitrogen-vacancy centers in optically trapped nanodiamonds
Authors:
Viva R. Horowitz,
Benjamín J. Alemán,
David J. Christle,
Andrew N. Cleland,
David D. Awschalom
Abstract:
Using an optical tweezers apparatus, we demonstrate three-dimensional control of nanodiamonds in solution with simultaneous readout of ground-state electron-spin resonance (ESR) transitions in an ensemble of diamond nitrogen-vacancy (NV) color centers. Despite the motion and random orientation of NV centers suspended in the optical trap, we observe distinct peaks in the measured ESR spectra qualit…
▽ More
Using an optical tweezers apparatus, we demonstrate three-dimensional control of nanodiamonds in solution with simultaneous readout of ground-state electron-spin resonance (ESR) transitions in an ensemble of diamond nitrogen-vacancy (NV) color centers. Despite the motion and random orientation of NV centers suspended in the optical trap, we observe distinct peaks in the measured ESR spectra qualitatively similar to the same measurement in bulk. Accounting for the random dynamics, we model the ESR spectra observed in an externally applied magnetic field to enable d.c. magnetometry in solution. We estimate the d.c. magnetic field sensitivity based on variations in ESR line shapes to be ~50 microTesla/Hz^1/2. This technique may provide a pathway for spin-based magnetic, electric, and thermal sensing in fluidic environments and biophysical systems inaccessible to existing scanning probe techniques.
△ Less
Submitted 7 June, 2012;
originally announced June 2012.
-
Self-propelled film-boiling liquids
Authors:
H. Linke,
B. J. Aleman,
L. D. Melling,
M. J. Taormina,
M. J. Francis,
C. C. Dow-Hygelund,
V. Narayanan,
R. P. Taylor,
A. Stout
Abstract:
We report that liquids perform self-propelled motion when they are placed in contact with hot surfaces with asymmetric (ratchet-like) topology. The pum** effect is observed when the liquid is in the film-boiling regime, for many liquids and over a wide temperature range. We propose that liquid motion is driven by a viscous force exerted by vapor flow between the solid and the liquid.
We report that liquids perform self-propelled motion when they are placed in contact with hot surfaces with asymmetric (ratchet-like) topology. The pum** effect is observed when the liquid is in the film-boiling regime, for many liquids and over a wide temperature range. We propose that liquid motion is driven by a viscous force exerted by vapor flow between the solid and the liquid.
△ Less
Submitted 26 December, 2005;
originally announced December 2005.