-
A two-dimensional optomechanical crystal for quantum transduction
Authors:
Felix M. Mayor,
Sultan Malik,
André G. Primo,
Samuel Gyger,
Wentao Jiang,
Thiago P. M. Alegre,
Amir H. Safavi-Naeini
Abstract:
Integrated optomechanical systems are one of the leading platforms for manipulating, sensing, and distributing quantum information. The temperature increase due to residual optical absorption sets the ultimate limit on performance for these applications. In this work, we demonstrate a two-dimensional optomechanical crystal geometry, named \textbf{b-dagger}, that alleviates this problem through inc…
▽ More
Integrated optomechanical systems are one of the leading platforms for manipulating, sensing, and distributing quantum information. The temperature increase due to residual optical absorption sets the ultimate limit on performance for these applications. In this work, we demonstrate a two-dimensional optomechanical crystal geometry, named \textbf{b-dagger}, that alleviates this problem through increased thermal anchoring to the surrounding material. Our mechanical mode operates at 7.4 GHz, well within the operation range of standard cryogenic microwave hardware and piezoelectric transducers. The enhanced thermalization combined with the large optomechanical coupling rates, $g_0/2π\approx 880~\mathrm{kHz}$, and high optical quality factors, $Q_\text{opt} = 2.4 \times 10^5$, enables the ground-state cooling of the acoustic mode to phononic occupancies as low as $n_\text{m} = 0.35$ from an initial temperature of 3 kelvin, as well as entering the optomechanical strong-coupling regime. Finally, we perform pulsed sideband asymmetry of our devices at a temperature below 10 millikelvin and demonstrate ground-state operation ($n_\text{m} < 0.45$) for repetition rates as high as 3 MHz. Our results extend the boundaries of optomechanical system capabilities and establish a robust foundation for the next generation of microwave-to-optical transducers with entanglement rates overcoming the decoherence rates of state-of-the-art superconducting qubits.
△ Less
Submitted 20 June, 2024;
originally announced June 2024.
-
On-Chip Backward Stimulated Brillouin Scattering in Lithium Niobate Waveguides
Authors:
Caique C. Rodrigues,
Nick J. Schilder,
Roberto O. Zurita,
Letícia S. Magalhães,
Amirhassan Shams-Ansari,
Thiago P. M. Alegre,
Marko Lončar,
Gustavo S. Wiederhecker
Abstract:
We report on the first experimental demonstration of backward stimulated Brillouin scattering (SBS) in Lithium Niobate on Insulator (LNOI) waveguides. Performing polarization-dependent pump-probe experiments, we successfully quantified both intramodal and intermodal scattering among fundamental modes, showcasing substantial gains up to $G_{B}=$10m$^{-1}$W$^{-1}$. Such large gains on simple wavegui…
▽ More
We report on the first experimental demonstration of backward stimulated Brillouin scattering (SBS) in Lithium Niobate on Insulator (LNOI) waveguides. Performing polarization-dependent pump-probe experiments, we successfully quantified both intramodal and intermodal scattering among fundamental modes, showcasing substantial gains up to $G_{B}=$10m$^{-1}$W$^{-1}$. Such large gains on simple waveguides open a pathway for unlocking novel opto-electro-mechanical phenomena within the LNOI platform.
△ Less
Submitted 29 November, 2023;
originally announced November 2023.
-
Synchronization of silicon thermal-free-carrier oscillators
Authors:
Gustavo de O. Luiz,
Caique C. Rodrigues,
Thiago P. Mayer Alegre,
Gustavo S. Wiederhecker
Abstract:
Recent exploration of collective phenomena in oscillator arrays has highlighted its potential for accessing a range of physical phenomena, from fundamental quantum many-body dynamics to the solution of practical optimization problems using photonic Ising machines. Spontaneous oscillations often arise in these oscillator arrays as an imbalance between gain and loss. Due to coupling between array in…
▽ More
Recent exploration of collective phenomena in oscillator arrays has highlighted its potential for accessing a range of physical phenomena, from fundamental quantum many-body dynamics to the solution of practical optimization problems using photonic Ising machines. Spontaneous oscillations often arise in these oscillator arrays as an imbalance between gain and loss. Due to coupling between array individuals, the spontaneous oscillation is constrained and lead to interesting collective behavior, such as synchronized oscillations in optomechanical oscillator arrays, ferromagnetic-like coupling in delay-coupled optical parametric oscillators and binary phase states in coupled laser arrays. A key aspect of arrays is not only the coupling between its individuals but also their compliance towards neighbor stimuli. One self-sustaining photonic oscillator that can be readily implemented in a scalable foundry-based technology is based on the interaction of free-carriers, temperature and optical field of a resonant silicon photonic microcavity. Here we demonstrate that these silicon thermal-free-carrier oscillators are extremely compliant to external excitation and can be synchronized up to their 16$^\text{th}$ harmonic using a weak seed. Exploring this unprecedented compliance to external stimuli, we also demonstrate robust synchronization between two thermal free carrier oscillators.
△ Less
Submitted 2 May, 2023;
originally announced May 2023.
-
Stimulated Brillouin scattering by surface acoustic waves in lithium niobate waveguides
Authors:
Caique C. Rodrigues,
Roberto O. Zurita,
Thiago P. M. Alegre,
Gustavo S. Wiederhecker
Abstract:
We numerically demonstrate that Lithium Niobate on Insulator (LNOI) waveguides may support confined short-wavelength surface acoustic waves that interact strongly with optical fields through backward stimulated Brillouin scattering in both $Z$ and $X$-cut orientation. We conduct fully anisotropic simulations that consider not only moving boundary and photoelastic forces, but also roto-optic forces…
▽ More
We numerically demonstrate that Lithium Niobate on Insulator (LNOI) waveguides may support confined short-wavelength surface acoustic waves that interact strongly with optical fields through backward stimulated Brillouin scattering in both $Z$ and $X$-cut orientation. We conduct fully anisotropic simulations that consider not only moving boundary and photoelastic forces, but also roto-optic forces for the Brillouin interaction. Our results indicate that photoelasticity dominates the Brillouin gain and can reach as high as $G_{B}/Q_{m}$ = 0.43 W$^{-1}$m$^{-1}$ in standard ridge waveguides
△ Less
Submitted 7 March, 2023; v1 submitted 8 February, 2023;
originally announced February 2023.
-
Dissipative Optomechanics in High-Frequency Nanomechanical Resonators
Authors:
André G. Primo,
Pedro V. Pinho,
Rodrigo Benevides,
Simon Gröblacher,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
The coherent transduction of information between microwave and optical domains is a fundamental building block for future quantum networks. A promising way to bridge these widely different frequencies is using high-frequency nanomechanical resonators interacting with low-loss optical modes. State-of-the-art optomechanical devices rely on purely dispersive interactions that are enhanced by a large…
▽ More
The coherent transduction of information between microwave and optical domains is a fundamental building block for future quantum networks. A promising way to bridge these widely different frequencies is using high-frequency nanomechanical resonators interacting with low-loss optical modes. State-of-the-art optomechanical devices rely on purely dispersive interactions that are enhanced by a large photon population in the cavity. Additionally, one could use dissipative optomechanics, where photons can be scattered directly from a waveguide into a resonator hence increasing the degree of control of the acousto-optic interplay. Hitherto, such dissipative optomechanical interaction was only demonstrated at low mechanical frequencies, precluding prominent applications such as the quantum state transfer between photonic and phononic domains. Here, we show the first dissipative optomechanical system operating in the sideband-resolved regime, where the mechanical frequency is larger than the optical linewidth. Exploring this unprecedented regime, we demonstrate the impact of dissipative optomechanical coupling in resha** both mechanical and optical spectra. Our figures represent a two-order-of-magnitude leap in the mechanical frequency and a tenfold increase in the dissipative optomechanical coupling rate compared to previous works. Further advances could enable the individual addressing of mechanical modes and help mitigate optical nonlinearities and absorption in optomechanical devices.
△ Less
Submitted 1 September, 2023; v1 submitted 29 December, 2022;
originally announced December 2022.
-
Third-harmonic generation in silica wedge resonators
Authors:
Jorge H. Soares,
Laís Fujii Dos Santos,
Felipe G. S. Santos,
Marvyn Inga,
Yovanny A. V. Espinel,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
Whispering-gallery-mode microcavities are known to have high optical quality factor, making them suitable for nonlinear optical interactions. Here, third-harmonic generation is observed using a relatively small radius wedge silicon oxide optical microcavity. The small radii wedge microdisks can be dispersion-tailored to obtain either normal or anomalous group velocity dispersion. In our case, we o…
▽ More
Whispering-gallery-mode microcavities are known to have high optical quality factor, making them suitable for nonlinear optical interactions. Here, third-harmonic generation is observed using a relatively small radius wedge silicon oxide optical microcavity. The small radii wedge microdisks can be dispersion-tailored to obtain either normal or anomalous group velocity dispersion. In our case, we operate in the normal dispersion regime preventing frequency comb generation by suppressing infrared cascading four-wave mixing. This allows for a clean third harmonic generation at phase-matched visible optical modes. Tunability of the third-harmonic emission is obtained due to a combination of the thermo-optical and Kerr effects. An additional thermal control of the phase matching condition allows for optimizing third-harmonic generation, and agreement between this process and couple-mode theory is demonstrated.
△ Less
Submitted 9 December, 2022;
originally announced December 2022.
-
Silicon anisotropy in a bi-dimensional optomechanical cavity
Authors:
Cauê M. Kersul,
Rodrigo Benevides,
Flávio Moraes,
Gabriel H. M. de Aguiar,
Andreas Wallucks,
Simon Gröblacher,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
In this work, we study the effects of mechanical anisotropy in a 2D optomechanical crystal geometry. We fabricate and measure devices with different orientations, showing the dependence of the mechanical spectrum and the optomechanical coupling with the relative angle of the device to the crystallography directions of silicon. Our results show that the device orientation strongly affects its mecha…
▽ More
In this work, we study the effects of mechanical anisotropy in a 2D optomechanical crystal geometry. We fabricate and measure devices with different orientations, showing the dependence of the mechanical spectrum and the optomechanical coupling with the relative angle of the device to the crystallography directions of silicon. Our results show that the device orientation strongly affects its mechanical band structure, which makes the devices more susceptible to fabrication imperfections. Finally, we show that our device is compatible with cryogenic measurements reaching ground state occupancy of 0.2 phonons at mK temperature.
△ Less
Submitted 18 November, 2022;
originally announced November 2022.
-
Optimization of diamond optomechanical crystal cavities
Authors:
Flavio Moraes,
Gabriel H. M. de Aguiar,
Emerson G. de Melo,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
Due to recent development of growing and processing techniques for high-quality single crystal diamond, the large scale production of diamond optomechanical crystal cavities becomes feasible, enabling optomechanical devices that can operate in higher mechanical frequencies and be coupled to two-level systems based on diamond color centers. In this paper we describe a design optimization method to…
▽ More
Due to recent development of growing and processing techniques for high-quality single crystal diamond, the large scale production of diamond optomechanical crystal cavities becomes feasible, enabling optomechanical devices that can operate in higher mechanical frequencies and be coupled to two-level systems based on diamond color centers. In this paper we describe a design optimization method to produce diamond optomechanical crystal (OMC) cavities operating at the high-cooperativity regime (close to unity) at room temperature.
△ Less
Submitted 3 July, 2022;
originally announced July 2022.
-
Enantioselective optical forces in gain-functionalized single core-shell chiral nanoparticles
Authors:
R. Ali,
F. A. Pinheiro,
R. S. Dutra,
T. P. Mayer Alegre,
G. S. Wiederhecker
Abstract:
We propose a gain-assisted enantioselective scheme in dye-doped chiral particles, demonstrating optical pulling and pushing forces that can be tuned using externally controllable parameters. By controlling the concentration of dye molecules and pum** rate, we achieve all-optical chiral resolution of racemic mixtures and enantioselection of small dipolar chiral particles without relying on interf…
▽ More
We propose a gain-assisted enantioselective scheme in dye-doped chiral particles, demonstrating optical pulling and pushing forces that can be tuned using externally controllable parameters. By controlling the concentration of dye molecules and pum** rate, we achieve all-optical chiral resolution of racemic mixtures and enantioselection of small dipolar chiral particles without relying on interference. This scheme is applicable to both lossless and lossy plasmonic chiral particles, making it a promising approach for chiral sensing, drug discovery, and molecular separation.
△ Less
Submitted 19 April, 2023; v1 submitted 21 March, 2022;
originally announced March 2022.
-
Optomechanical Synchronization across Multi-Octaves Frequency Spans
Authors:
Caique C. Rodrigues,
Cauê M. Kersul,
André G. Primo,
Michal Lipson,
Thiago P. M. Alegre,
Gustavo S. Wiederhecker
Abstract:
Experimental exploration of synchronization in scalable oscillator micro systems has unfolded a deeper understanding of networks, collective phenomena, and signal processing. Cavity optomechanical devices have played an important role in this scenario, with the perspective of bridging optical and radio frequencies through nonlinear classical and quantum synchronization concepts. In its simplest fo…
▽ More
Experimental exploration of synchronization in scalable oscillator micro systems has unfolded a deeper understanding of networks, collective phenomena, and signal processing. Cavity optomechanical devices have played an important role in this scenario, with the perspective of bridging optical and radio frequencies through nonlinear classical and quantum synchronization concepts. In its simplest form, synchronization occurs when an oscillator is entrained by a signal with frequency nearby the oscillator's tone, and becomes increasingly challenging as their frequency detuning increases. Here, we experimentally demonstrate entrainment of a silicon-nitride optomechanical oscillator driven up to the fourth harmonic of its 32 MHz fundamental frequency. Exploring this effect, we also experimentally demonstrate for the first time a purely optomechanical RF frequency divider, where we performed frequency division up to a 4:1 ratio, i.e., from 128 MHz to 32 MHz. Further developments could harness these effects towards frequency synthesizers, phase-sensitive amplification and nonlinear sensing.
△ Less
Submitted 24 September, 2021; v1 submitted 4 May, 2021;
originally announced May 2021.
-
Optomechanical quantum teleportation
Authors:
Niccolò Fiaschi,
Bas Hensen,
Andreas Wallucks,
Rodrigo Benevides,
Jie Li,
Thiago P. Mayer Alegre,
Simon Gröblacher
Abstract:
Quantum teleportation, the faithful transfer of an unknown input state onto a remote quantum system, is a key component in long distance quantum communication protocols and distributed quantum computing. At the same time, high frequency nano-optomechanical systems hold great promise as nodes in a future quantum network, operating on-chip at low-loss optical telecom wavelengths with long mechanical…
▽ More
Quantum teleportation, the faithful transfer of an unknown input state onto a remote quantum system, is a key component in long distance quantum communication protocols and distributed quantum computing. At the same time, high frequency nano-optomechanical systems hold great promise as nodes in a future quantum network, operating on-chip at low-loss optical telecom wavelengths with long mechanical lifetimes. Recent demonstrations include entanglement between two resonators, a quantum memory and microwave to optics transduction. Despite these successes, quantum teleportation of an optical input state onto a long-lived optomechanical memory is an outstanding challenge. Here we demonstrate quantum teleportation of a polarization-encoded optical input state onto the joint state of a pair of nanomechanical resonators. Our protocol also allows for the first time to store and retrieve an arbitrary qubit state onto a dual-rail encoded optomechanical quantum memory. This work demonstrates the full functionality of a single quantum repeater node, and presents a key milestone towards applications of optomechanical systems as quantum network nodes.
△ Less
Submitted 25 November, 2022; v1 submitted 5 April, 2021;
originally announced April 2021.
-
Designing of strongly confined short-wave Brillouin phonons in silicon waveguide periodic lattices
Authors:
Roberto O. Zurita,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
We propose a feasible waveguide design optimized for harnessing Stimulated Brillouin Scattering with long-lived phonons. The design consists of a fully suspended ridge waveguide surrounded by a 1D phononic crystal that mitigates losses to the substrate while providing the needed homogeneity for the build-up of the optomechanical interaction. The coupling factor of these structures was calculated t…
▽ More
We propose a feasible waveguide design optimized for harnessing Stimulated Brillouin Scattering with long-lived phonons. The design consists of a fully suspended ridge waveguide surrounded by a 1D phononic crystal that mitigates losses to the substrate while providing the needed homogeneity for the build-up of the optomechanical interaction. The coupling factor of these structures was calculated to be 0.54 (W.m)$^{-1}$ for intramodal backward Brillouin scattering with its fundamental TE-like mode and 4.5(W.m)$^{-1}$ for intramodal forward Brillouin scattering. The addition of the phononic crystal provides a 30 dB attenuation of the mechanical displacement after only five unitary cells, possibly leading to a regime where the acoustic losses are only limited by fabrication. As a result, the total Brillouin gain, which is proportional to the product of the coupling and acoustic quality factors, is nominally equal to the idealized fully suspended waveguide.
△ Less
Submitted 28 October, 2020;
originally announced October 2020.
-
Alumina coating for dispersion management in ultra-high Q microresonators
Authors:
Marvyn Inga,
Laís Fujii,
José Maria C. da Silva Filho,
João Henrique Q. Palhares,
Andre S. Ferlauto,
Francisco C. Marques,
Thiago P. Mayer Alegre,
Gustavo S. Wiederhecker
Abstract:
Silica optical microspheres often exhibit ultra-high quality factors, yet, their group velocity dispersion, which is crucial for nonlinear optics applications, can only be coarsely tuned. We experimentally demonstrate that group-velocity dispersion of a silica microsphere can be engineered by coating it with conformal nanometric layers of alumina, yet preserving its ultra-high optical quality fact…
▽ More
Silica optical microspheres often exhibit ultra-high quality factors, yet, their group velocity dispersion, which is crucial for nonlinear optics applications, can only be coarsely tuned. We experimentally demonstrate that group-velocity dispersion of a silica microsphere can be engineered by coating it with conformal nanometric layers of alumina, yet preserving its ultra-high optical quality factors (\num{\sim e7}) at telecom wavelengths. Using the atomic layer deposition technique for the dielectric coating, which ensures nm-level thickness control, we not only achieve a fine dispersion tailoring but also maintain a low surface roughness and material absorption to ensure a low optical loss. Numerical simulations supporting our experimental results show that the alumina layer thickness is a promising technique for precise tuning of group-velocity dispersion. As an application we demonstrate the generation of Kerr optical frequency combs, showing that the alumina coatings can also sustain the high optical intensities necessary for nonlinear optical phenomena.
△ Less
Submitted 16 September, 2020;
originally announced September 2020.
-
Accurate modeling and characterization of photothermal forces in optomechanics
Authors:
André G. Primo,
Cauê M. Kersul,
Rodrigo Benevides,
Natália C. Carvalho,
Michaël Ménard,
Newton C. Frateschi,
Pierre-Louis de Assis,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
Photothermal effects have been pointed out as prominent sources of forces in optomechanical systems, competing with the standard radiation pressure interactions. In this Article, we derive a novel and accurate model for the prediction of photothermal forces and establish how some previous proposals can be complemented to yield precise results. As a proof-of-concept, we perform numerical and experi…
▽ More
Photothermal effects have been pointed out as prominent sources of forces in optomechanical systems, competing with the standard radiation pressure interactions. In this Article, we derive a novel and accurate model for the prediction of photothermal forces and establish how some previous proposals can be complemented to yield precise results. As a proof-of-concept, we perform numerical and experimental tests on GaAs microdisks cavities and obtain striking agreement with our framework, revealing the importance of considering surface photothermal forces and the effects of multiple thermal modes in microphotonic devices.
△ Less
Submitted 7 July, 2021; v1 submitted 22 August, 2020;
originally announced August 2020.
-
High-Frequency GaAs Optomechanical Bullseye Resonator
Authors:
N. C. Carvalho,
R. Benevides,
M. Ménard,
G. S. Wiederhecker,
N. C. Frateschi,
T. P. Mayer Alegre
Abstract:
The integration of optomechanics and optoelectronics in a single device opens new possibilities for develo** information technologies and exploring fundamental phenomena. Gallium arsenide (GaAs) is a well-known material that can bridge the gap between the functionalities of optomechanical devices and optical gain media. Here, we experimentally demonstrate a high-frequency GaAs optomechanical res…
▽ More
The integration of optomechanics and optoelectronics in a single device opens new possibilities for develo** information technologies and exploring fundamental phenomena. Gallium arsenide (GaAs) is a well-known material that can bridge the gap between the functionalities of optomechanical devices and optical gain media. Here, we experimentally demonstrate a high-frequency GaAs optomechanical resonator with a ring-type bullseye geometry that is unprecedented in this platform. We measured mechanical modes up to 3.4 GHz with quality factors of 4000 (at 77 K) and optomechanical coupling rates up to 39 kHz at telecom wavelengths. Moreover, we investigated the material symmetry break due to elastic anisotropy and its impact on the mechanical mode spectrum. Finally, we assessed the temperature dependence of the mechanical losses and demonstrated the efficiency and anisotropy resilience of the bullseye anchor loss suppression, indicating that lower temperature operation may allow mechanical quality factors over $10^4$. Such characteristics are valuable for active optomechanics, coherent microwave-to-optics conversion via piezo-mechanics and other implementations of high-frequency oscillators in III-V materials.
△ Less
Submitted 23 October, 2020; v1 submitted 7 August, 2020;
originally announced August 2020.
-
Quasinormal-mode perturbation theory for dissipative and dispersive optomechanics
Authors:
André G. Primo,
Natália C. Carvalho,
Cauê M. Kersul,
Newton C. Frateschi,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
Despite the several novel features arising from the dissipative optomechanical coupling, such effect remains vastly unexplored due to the lack of a simple formalism that captures non-Hermiticity in optomechanical systems. In this Letter, we show that quasinormal-mode-based perturbation theory is capable of correctly predicting both dispersive and dissipative optomechanical couplings. We validate o…
▽ More
Despite the several novel features arising from the dissipative optomechanical coupling, such effect remains vastly unexplored due to the lack of a simple formalism that captures non-Hermiticity in optomechanical systems. In this Letter, we show that quasinormal-mode-based perturbation theory is capable of correctly predicting both dispersive and dissipative optomechanical couplings. We validate our model through simulations and also by comparison with experimental results reported in the literature. Finally, we apply this formalism to plasmonic systems, used for molecular optomechanics, where strong dissipative coupling signatures in the amplification of vibrational modes are observed.
△ Less
Submitted 5 October, 2020; v1 submitted 31 May, 2020;
originally announced June 2020.
-
Proposal for optomechanical quantum teleportation
Authors:
Jie Li,
Andreas Wallucks,
Rodrigo Benevides,
Niccolo Fiaschi,
Bas Hensen,
Thiago P. Mayer Alegre,
Simon Gröblacher
Abstract:
We present a novel discrete-variable quantum teleportation scheme using pulsed optomechanics. In our proposal, we demonstrate how an unknown optical input state can be transferred onto the joint state of a pair of mechanical oscillators, without physically interacting with one another. We further analyze how experimental imperfections will affect the fidelity of the teleportation and highlight how…
▽ More
We present a novel discrete-variable quantum teleportation scheme using pulsed optomechanics. In our proposal, we demonstrate how an unknown optical input state can be transferred onto the joint state of a pair of mechanical oscillators, without physically interacting with one another. We further analyze how experimental imperfections will affect the fidelity of the teleportation and highlight how our scheme can be realized in current state-of-the-art optomechanical systems.
△ Less
Submitted 3 September, 2020; v1 submitted 18 May, 2020;
originally announced May 2020.
-
Dispersion tailoring in wedge microcavities for Kerr comb generation
Authors:
Laís Fujii,
Marvyn Inga,
Jorge H. Soares,
Yovanny A. V. Espinel,
Thiago P. Mayer Alegre,
Gustavo. S. Wiederhecker
Abstract:
The sha** of group velocity dispersion in microresonators is an important component in the generation of wideband optical frequency combs. Small resonators - with tight bending radii - offer the large free-spectral range desirable for wide comb formation. However, the tighter bending usually limit comb formation as it enhances normal group velocity dispersion. We experimentally demonstrate that…
▽ More
The sha** of group velocity dispersion in microresonators is an important component in the generation of wideband optical frequency combs. Small resonators - with tight bending radii - offer the large free-spectral range desirable for wide comb formation. However, the tighter bending usually limit comb formation as it enhances normal group velocity dispersion. We experimentally demonstrate that engineering the sidewall angle of small-radius (100 $μ$m), 3 $μ$m-thick silica wedge microdisks enables dispersion tuning in both normal and anomalous regimes, without significantly affecting the free spectral range. A microdisk with wedge angle of $55^{\circ}$ (anomalous dispersion) is used to demonstrate a 300 nm bandwidth Kerr optical frequency comb.
△ Less
Submitted 25 March, 2020;
originally announced March 2020.
-
Bright and Vivid Diffractive-Plasmonic Structural Colors
Authors:
Emerson G. Melo,
Ana L. A. Ribeiro,
Rodrigo S. Benevides,
Antonio A. G. V. Zuben,
Marcos V. P. Santos,
Alexandre A. Silva,
Gustavo S. Wiederhecker,
Thiago P. M. Alegre
Abstract:
Colors observed in nature are very important to form our perception of an object as well as its design. The desire to reproduce vivid colors such as those found in birds, fishes, flowers and insects has driven extensive research into nanostructured surfaces. Structural colors based on surface plasmon resonance (SPR) have played an important role in this field due to its high spatial resolution. Cr…
▽ More
Colors observed in nature are very important to form our perception of an object as well as its design. The desire to reproduce vivid colors such as those found in birds, fishes, flowers and insects has driven extensive research into nanostructured surfaces. Structural colors based on surface plasmon resonance (SPR) have played an important role in this field due to its high spatial resolution. Creating vivid color reflecting surfaces is still a major challenge and could revolutionize low power consumption image displays. Here we combine diffraction and plasmonic effects to design bright and vivid-color reflecting surfaces. The periodic reflection patterns are designed through genetic algorithm optimization and are defined in aluminum coated silicon chips.
△ Less
Submitted 7 October, 2019;
originally announced October 2019.
-
Ar/Cl$_{2}$ etching of GaAs optomechanical microdisks fabricated with positive electroresist
Authors:
Rodrigo Benevides,
Michaël Ménard,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
A method to fabricate GaAs microcavities using only a soft mask with an electrolithographic pattern in an inductively coupled plasma etching is presented. A careful characterization of the fabrication process pinpointing the main routes for a smooth device sidewall is discussed. Using the final recipe, optomechanical microdisk resonators are fabricated. The results show a very high optical quality…
▽ More
A method to fabricate GaAs microcavities using only a soft mask with an electrolithographic pattern in an inductively coupled plasma etching is presented. A careful characterization of the fabrication process pinpointing the main routes for a smooth device sidewall is discussed. Using the final recipe, optomechanical microdisk resonators are fabricated. The results show a very high optical quality factors of $Q_\text{opt}>2\times 10^{5}$, among the largest already reported for dry-etching devices. The final devices are also shown to present high mechanical quality factors and an optomechanical vacuum coupling constant of $g_{0}=2π\times 13.6$ kHz enabling self-sustainable mechanical oscillations for an optical input power above $1$ mW.
△ Less
Submitted 15 September, 2019;
originally announced September 2019.
-
Ultrahigh-Q optomechanical crystals cavities fabricated on a CMOS foundry
Authors:
Rodrigo Benevides,
Felipe G. S. Santos,
Gustavo O. Luiz,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
Photonic crystals use periodic structures to create forbidden frequency regions for optical wave propagation, that allow for the creation and integration of complex optical functions in small footprint devices. Such strategy has also been successfully applied to confine mechanical waves and to explore their interaction with light in the so-called optomechanical cavities. Because of their challengi…
▽ More
Photonic crystals use periodic structures to create forbidden frequency regions for optical wave propagation, that allow for the creation and integration of complex optical functions in small footprint devices. Such strategy has also been successfully applied to confine mechanical waves and to explore their interaction with light in the so-called optomechanical cavities. Because of their challenging design, these cavities are traditionally fabricated using dedicated high-resolution electron-beam lithography tools that are inherently slow, limiting this solution to small-scale applications or research. Here we show how to overcome this problem by using a deep-UV photolithography process to fabricate optomechanical crystals on a commercial CMOS foundry. We show that a careful design of the photonic crystals can withstand the limitations of the photolithography process, producing cavities with measured intrinsic optical quality factors as high as $Q_{i}=(1.21\pm0.02)\times10^{6}$. Optomechanical crystals are also created using phononic crystals to tightly confine the sound waves within the optical cavity that results in a measured vacuum optomechanical coupling rate of $g_{0}=2π\times(91\pm4)$ kHz. Efficient sideband cooling and amplification are also demonstrated since these cavities are in the resolved sideband regime. Further improvement in the design and fabrication process suggest that commercial foundry-based optomechanical cavities could be used for quantum ground-state cooling.
△ Less
Submitted 12 January, 2017;
originally announced January 2017.
-
Efficient anchor loss suppression in coupled near-field optomechanical resonators
Authors:
Gustavo O. Luiz,
Felipe G. S. Santos,
Rodrigo S. Benevides,
Yovanny A. V. Espinel,
Thiago P. M. Alegre,
Gustavo S. Wiederhecker
Abstract:
Elastic dissipation through radiation towards the substrate is a major loss channel in micro- and nanomechanical resonators. Engineering the coupling of these resonators with optical cavities further complicates and constrains the design of low-loss optomechanical devices. In this work we rely on the coherent cancellation of mechanical radiation to demonstrate material and surface absorption limit…
▽ More
Elastic dissipation through radiation towards the substrate is a major loss channel in micro- and nanomechanical resonators. Engineering the coupling of these resonators with optical cavities further complicates and constrains the design of low-loss optomechanical devices. In this work we rely on the coherent cancellation of mechanical radiation to demonstrate material and surface absorption limited silicon near-field optomechanical resonators oscillating at tens of MHz. The effectiveness of our dissipation suppression scheme is investigated at room and cryogenic temperatures. While at room temperature we can reach a maximum quality factor of 7.61k ($fQ$-product of the order of $10^{11}$~Hz), at 22~K the quality factor increases to 37k, resulting in a $fQ$-product of $2\times10^{12}$~Hz.
△ Less
Submitted 2 October, 2017; v1 submitted 12 January, 2017;
originally announced January 2017.
-
Brillouin Optomechanics in Coupled Silicon Microcavities
Authors:
Yovanny A. V. Espinel,
Felipe G. S. Santos,
Gustavo O. Luiz,
Thiago P. M. Alegre,
Gustavo S. Wiederhecker
Abstract:
The simultaneous control of optical and mechanical waves has enabled a range of fundamental and technological breakthroughs, from the demonstration of ultra-stable frequency reference devices to the exploration of the quantum-classical boundaries in laser-cooling experiments. More recently, such an opto-mechanical interaction has been observed in integrated nano-waveguides and microcavities in the…
▽ More
The simultaneous control of optical and mechanical waves has enabled a range of fundamental and technological breakthroughs, from the demonstration of ultra-stable frequency reference devices to the exploration of the quantum-classical boundaries in laser-cooling experiments. More recently, such an opto-mechanical interaction has been observed in integrated nano-waveguides and microcavities in the Brillouin regime, where short-wavelength mechanical modes scatters light at several GHz. Here we engineer coupled optical microcavities spectra to enable a low threshold excitation of mechanical travelling-wave modes through backward stimulated Brillouin scattering. Exploring the backward scattering we propose microcavity designs supporting super high frequency modes ($\sim25$ GHz) an large optomechanical coupling rates ($g_0/2π\sim 50$ kHz).
△ Less
Submitted 29 September, 2016;
originally announced September 2016.
-
Hybrid confinement of optical and mechanical modes in a bullseye optomechanical resonator
Authors:
Felipe G. S. Santos,
Yovanny A. V. Espinel,
Gustavo O. Luiz,
Rodrigo S. Benevides,
Gustavo S. Wiederhecker,
Thiago P. Mayer Alegre
Abstract:
Optomechanical cavities have proven to be an exceptional tool to explore fundamental and technological aspects of the interaction between mechanical and optical waves. Such interactions strongly benefit from cavities with large optomechanical coupling, high mechanical and optical quality factors, and mechanical frequencies larger than the optical mode linewidth, the so called resolved sideband lim…
▽ More
Optomechanical cavities have proven to be an exceptional tool to explore fundamental and technological aspects of the interaction between mechanical and optical waves. Such interactions strongly benefit from cavities with large optomechanical coupling, high mechanical and optical quality factors, and mechanical frequencies larger than the optical mode linewidth, the so called resolved sideband limit. Here we demonstrate a novel optomechanical cavity based on a disk with a radial mechanical bandgap. This design confines light and mechanical waves through distinct physical mechanisms which allows for independent control of the mechanical and optical properties. Our device design is not limited by unique material properties and could be easily adapted to allow large optomechanical coupling and high mechanical quality factors with other promising materials. Finally, our demonstration is based on devices fabricated on a commercial silicon photonics facility, demonstrating that our approach can be easily scalable.
△ Less
Submitted 20 May, 2016;
originally announced May 2016.
-
Brillouin Scattering Self-Cancellation
Authors:
Omar Florez,
Paulo F. Jarschel,
Yovanny A. V. Espinel,
Cristiano M. B. Cordeiro,
Thiago P. Mayer Alegre,
Gustavo S. Wiederhecker,
Paulo Dainese
Abstract:
The interaction between light and acoustic phonons is strongly modified in sub-wavelength confinement, and has led to the demonstration and control of Brillouin scattering in photonic structures such as nano-scale optical waveguides and cavities. Besides the small optical mode volume, two physical mechanisms come into play simultaneously: a volume effect caused by the strain induced refractive ind…
▽ More
The interaction between light and acoustic phonons is strongly modified in sub-wavelength confinement, and has led to the demonstration and control of Brillouin scattering in photonic structures such as nano-scale optical waveguides and cavities. Besides the small optical mode volume, two physical mechanisms come into play simultaneously: a volume effect caused by the strain induced refractive index perturbation (known as photo-elasticity), and a surface effect caused by the shift of the optical boundaries due to mechanical vibrations. As a result proper material and structure engineering allows one to control each contribution individually. In this paper, we experimentally demonstrate the perfect cancellation of Brillouin scattering by engineering a silica nanowire with exactly opposing photo-elastic and moving-boundary effects. This demonstration provides clear experimental evidence that the interplay between the two mechanisms is a promising tool to precisely control the photon-phonon interaction, enhancing or suppressing it.
△ Less
Submitted 20 January, 2016;
originally announced January 2016.
-
A chip-scale integrated cavity-electro-optomechanics platform
Authors:
Martin Winger,
Tim Blasius,
Thiago P. Mayer Alegre,
Amir H. Safavi-Naeini,
Seán Meenehan,
Justin Cohen,
Søren Stobbe,
Oskar Painter
Abstract:
We present an integrated optomechanical and electromechanical nanocavity, in which a common mechanical degree of freedom is coupled to an ultrahigh-Q photonic crystal defect cavity and an electrical circuit. The sys- tem allows for wide-range, fast electrical tuning of the optical nanocavity resonances, and for electrical control of optical radiation pressure back-action effects such as mechanical…
▽ More
We present an integrated optomechanical and electromechanical nanocavity, in which a common mechanical degree of freedom is coupled to an ultrahigh-Q photonic crystal defect cavity and an electrical circuit. The sys- tem allows for wide-range, fast electrical tuning of the optical nanocavity resonances, and for electrical control of optical radiation pressure back-action effects such as mechanical amplification (phonon lasing), cooling, and stiffening. These sort of integrated devices offer a new means to efficiently interconvert weak microwave and optical signals, and are expected to pave the way for a new class of micro-sensors utilizing optomechanical back-action for thermal noise reduction and low-noise optical read-out.
△ Less
Submitted 19 November, 2011;
originally announced November 2011.
-
Measurement of the quantum zero-point motion of a nanomechanical resonator
Authors:
Amir H. Safavi-Naeini,
Jasper Chan,
Jeff T. Hill,
T. P. Mayer Alegre,
Alex Krause,
Oskar Painter
Abstract:
We present optical sideband spectroscopy measurements of a mesoscopic mechanical oscillator cooled near its quantum ground state. The mechanical oscillator, corresponding to a 3.99GHz acoustic mode of a patterned silicon nanobeam, is coupled via radiation pressure to a pair of co-localized 200THz optical modes. The mechanical mode is cooled close to its quantum ground state from a bath temperature…
▽ More
We present optical sideband spectroscopy measurements of a mesoscopic mechanical oscillator cooled near its quantum ground state. The mechanical oscillator, corresponding to a 3.99GHz acoustic mode of a patterned silicon nanobeam, is coupled via radiation pressure to a pair of co-localized 200THz optical modes. The mechanical mode is cooled close to its quantum ground state from a bath temperature of 18K using radiation pressure back-action stemming from the optical pum** of one of the optical cavity resonances. An optical probe beam, resonant with the second optical cavity resonance, is used to transduce the mechanical motion and determine the phonon occupancy of the mechanical mode. Measurement of the asymmetry between up-converted and down-converted photons of the probe beam yields directly the displacement noise power associated with the quantum zero-point motion of the mechanical oscillator, and provides an absolute calibration of the average phonon occupancy of the mechanical mode.
△ Less
Submitted 23 August, 2011;
originally announced August 2011.
-
Laser cooling of a nanomechanical oscillator into its quantum ground state
Authors:
Jasper Chan,
T. P. Mayer Alegre,
Amir H. Safavi-Naeini,
Jeff T. Hill,
Alex Krause,
Simon Groeblacher,
Markus Aspelmeyer,
Oskar Painter
Abstract:
A patterned Si nanobeam is formed which supports co-localized acoustic and optical resonances that are coupled via radiation pressure. Starting from a bath temperature of T=20K, the 3.68GHz nanomechanical mode is cooled into its quantum mechanical ground state utilizing optical radiation pressure. The mechanical mode displacement fluctuations, imprinted on the transmitted cooling laser beam, indic…
▽ More
A patterned Si nanobeam is formed which supports co-localized acoustic and optical resonances that are coupled via radiation pressure. Starting from a bath temperature of T=20K, the 3.68GHz nanomechanical mode is cooled into its quantum mechanical ground state utilizing optical radiation pressure. The mechanical mode displacement fluctuations, imprinted on the transmitted cooling laser beam, indicate that a final phonon mode occupancy of 0.85 +-0.04 is obtained.
△ Less
Submitted 18 June, 2011;
originally announced June 2011.
-
Quasi-two-dimensional optomechanical crystals with a complete phononic bandgap
Authors:
Thiago P. Mayer Alegre,
Amir Safavi-Naeini,
Martin Winger,
Oskar Painter
Abstract:
A fully planar two-dimensional optomechanical crystal formed in a silicon microchip is used to create a structure devoid of phonons in the GHz frequency range. A nanoscale photonic crystal cavity is placed inside the phononic bandgap crystal in order to probe the properties of the localized acoustic modes. By studying the trends in mechanical dam**, mode density, and optomechanical coupling stre…
▽ More
A fully planar two-dimensional optomechanical crystal formed in a silicon microchip is used to create a structure devoid of phonons in the GHz frequency range. A nanoscale photonic crystal cavity is placed inside the phononic bandgap crystal in order to probe the properties of the localized acoustic modes. By studying the trends in mechanical dam**, mode density, and optomechanical coupling strength of the acoustic resonances over an array of structures with varying geometric properties, clear evidence of a complete phononic bandgap is shown.
△ Less
Submitted 12 December, 2010;
originally announced December 2010.
-
Electromagnetically Induced Transparency and Slow Light with Optomechanics
Authors:
Amir H. Safavi-Naeini,
Thiago P. Mayer Alegre,
Jasper Chan,
Matt Eichenfield,
Martin Winger,
Qiang Lin,
Jeffrey T. Hill,
Darrick Chang,
Oskar Painter
Abstract:
Controlling the interaction between localized optical and mechanical excitations has recently become possible following advances in micro- and nano-fabrication techniques. To date, most experimental studies of optomechanics have focused on measurement and control of the mechanical subsystem through its interaction with optics, and have led to the experimental demonstration of dynamical back-action…
▽ More
Controlling the interaction between localized optical and mechanical excitations has recently become possible following advances in micro- and nano-fabrication techniques. To date, most experimental studies of optomechanics have focused on measurement and control of the mechanical subsystem through its interaction with optics, and have led to the experimental demonstration of dynamical back-action cooling and optical rigidity of the mechanical system. Conversely, the optical response of these systems is also modified in the presence of mechanical interactions, leading to strong nonlinear effects such as Electromagnetically Induced Transparency (EIT) and parametric normal-mode splitting. In atomic systems, seminal experiments and proposals to slow and stop the propagation of light, and their applicability to modern optical networks, and future quantum networks, have thrust EIT to the forefront of experimental study during the last two decades. In a similar fashion, here we use the optomechanical nonlinearity to control the velocity of light via engineered photon-phonon interactions. Our results demonstrate EIT and tunable optical delays in a nanoscale optomechanical crystal device, fabricated by simply etching holes into a thin film of silicon (Si). At low temperature (8.7 K), we show an optically-tunable delay of 50 ns with near-unity optical transparency, and superluminal light with a 1.4 microseconds signal advance. These results, while indicating significant progress towards an integrated quantum optomechanical memory, are also relevant to classical signal processing applications. Measurements at room temperature and in the analogous regime of Electromagnetically Induced Absorption (EIA) show the utility of these chip-scale optomechanical systems for optical buffering, amplification, and filtering of microwave-over-optical signals.
△ Less
Submitted 14 December, 2010; v1 submitted 9 December, 2010;
originally announced December 2010.
-
Electrostatically tunable optomechanical "zipper" cavity laser
Authors:
Raviv Perahia,
Justin Cohen,
Sean Meenehan,
Thiago P. Mayer Alegre,
Oskar Painter
Abstract:
A tunable nanoscale "zipper" laser cavity, formed from two doubly clamped photonic crystal nanobeams, is demonstrated. Pulsed, room temperature, optically pumped lasing action at a wavelength of 1.3 micron is observed for cavities formed in a thin membrane containing InAsP/GaInAsP quantum-wells. Metal electrodes are deposited on the ends of the nanobeams to allow for micro-electro-mechanical actua…
▽ More
A tunable nanoscale "zipper" laser cavity, formed from two doubly clamped photonic crystal nanobeams, is demonstrated. Pulsed, room temperature, optically pumped lasing action at a wavelength of 1.3 micron is observed for cavities formed in a thin membrane containing InAsP/GaInAsP quantum-wells. Metal electrodes are deposited on the ends of the nanobeams to allow for micro-electro-mechanical actuation. Electrostatic tuning and modulation of the laser wavelength is demonstrated at a rate of 0.25nm/V^2 and a frequency as high as 6.7MHz, respectively.
△ Less
Submitted 28 June, 2010;
originally announced June 2010.
-
Optomechanics in an ultrahigh-Q slotted 2D photonic crystal cavity
Authors:
Amir H. Safavi-Naeini,
Thiago P. Mayer Alegre,
Martin Winger,
Oskar Painter
Abstract:
Optical guided wave dielectric structures with nanoscale slots are known to provide strong electric field enhancements in the slotted region, enabling strong light-matter interactions. Here we demonstrate an ultrahigh-Q slotted 2D photonic crystal cavity for the purpose of obtaining strong interaction between the internal light field and the mechanical motion of the slotted structure. The experime…
▽ More
Optical guided wave dielectric structures with nanoscale slots are known to provide strong electric field enhancements in the slotted region, enabling strong light-matter interactions. Here we demonstrate an ultrahigh-Q slotted 2D photonic crystal cavity for the purpose of obtaining strong interaction between the internal light field and the mechanical motion of the slotted structure. The experimentally measured optical quality factor is Q=1.2x10^6 for a cavity with a simulated effective optical modal volume of 0.04 cubic wavelengths. Optical transduction of the thermal Brownian motion of the fundamental in-plane mechanical resonance of the slotted structure (151 MHz) is performed, from which an optomechanical coupling of 140 GHz/nm is inferred for an effective motional mass of 20 pg. Dynamical back-action of the optical field on the mechanical motion, resulting in both cooling and amplication of the mechanical motion, is also demonstrated.
△ Less
Submitted 20 June, 2010;
originally announced June 2010.
-
Optomechanical zipper cavity lasers: theoretical analysis of tuning range and stability
Authors:
Thiago P. Mayer Alegre,
Raviv Perahia,
Oskar Painter
Abstract:
The design of highly wavelength tunable semiconductor laser structures is presented. The system is based on a one dimensional photonic crystal cavity consisting of two patterned, doubly-clamped nanobeams, otherwise known as a "zipper" cavity. Zipper cavities are highly dispersive with respect to the gap between nanobeams in which extremely strong radiation pressure forces exist. Schemes for cont…
▽ More
The design of highly wavelength tunable semiconductor laser structures is presented. The system is based on a one dimensional photonic crystal cavity consisting of two patterned, doubly-clamped nanobeams, otherwise known as a "zipper" cavity. Zipper cavities are highly dispersive with respect to the gap between nanobeams in which extremely strong radiation pressure forces exist. Schemes for controlling the zipper cavity wavelength both optically and electrically are presented. Tuning ranges as high as 75nm are achieved for a nominal design wavelength of 1.3micron. Sensitivity of the mechanically compliant laser structure to thermal noise is considered, and it is found that dynamic back-action of radiation pressure in the form of an optical or electrical spring can be used to stabilize the laser frequency. Fabrication of zipper cavity laser structures in GaAs material with embedded self-assembled InAs quantum dots is presented, along with measurements of photoluminescence spectroscopy of the zipper cavity modes.
△ Less
Submitted 22 December, 2009;
originally announced December 2009.
-
Surface-plasmon mode hybridization in sub-wavelength microdisk lasers
Authors:
R. Perahia,
T. P. Mayer Alegre,
A. Safavi-Naeini,
O. Painter
Abstract:
Hybridization of surface-plasmon and dielectric waveguide whispering-gallery modes are demonstrated in a semiconductor microdisk laser cavity of sub-wavelength proportions. A metal layer is deposited on top of the semiconductor microdisk, the radius of which is systematically varied to enable mode hybridization between surface-plasmon and dielectric modes. The anti-crossing behavior of the two c…
▽ More
Hybridization of surface-plasmon and dielectric waveguide whispering-gallery modes are demonstrated in a semiconductor microdisk laser cavity of sub-wavelength proportions. A metal layer is deposited on top of the semiconductor microdisk, the radius of which is systematically varied to enable mode hybridization between surface-plasmon and dielectric modes. The anti-crossing behavior of the two cavity mode types is experimentally observed via photoluminescence spectroscopy and optically pumped lasing action at a wavelength of 1.3 micron is achieved at room temperature.
△ Less
Submitted 24 August, 2009;
originally announced August 2009.
-
Determination of spin polarization in InAs/GaAs self-assembled quantum dots
Authors:
F. G. G. Hernandez,
T. P. Mayer Alegre,
G. Medeiros-Ribeiro
Abstract:
The spin polarization of electrons trapped in InAs self-assembled quantum dot ensembles is investigated. A statistical approach for the population of the spin levels allows one to infer the spin polarization from the measure values of the addition energies. From the magneto-capacitance spectroscopy data, the authors found a fully polarized ensemble of electronic spins above 10 T when…
▽ More
The spin polarization of electrons trapped in InAs self-assembled quantum dot ensembles is investigated. A statistical approach for the population of the spin levels allows one to infer the spin polarization from the measure values of the addition energies. From the magneto-capacitance spectroscopy data, the authors found a fully polarized ensemble of electronic spins above 10 T when $\mathbf{B}\parallel[001]$ and at 2.8 K. Finally, by including the g-tensor anisotropy the angular dependence of spin polarization with the magnetic field $\mathbf{B}$ orientation and strength could be determined.
△ Less
Submitted 15 March, 2008; v1 submitted 24 October, 2007;
originally announced October 2007.
-
Microstrip resonator for microwaves with controllable polarization
Authors:
Thiago P. Mayer Alegre,
Antonio C. Torrezan de Souza,
Gilberto Medeiros-Ribeiro
Abstract:
In this work the authors implemented a resonator based upon microstrip cavities that permits the generation of microwaves with arbitrary polarization. Design, simulation, and implementation of the resonators were performed using standard printed circuit boards. The electric field distribution was mapped using a scanning probe cavity perturbation technique. Electron spin resonance using a standar…
▽ More
In this work the authors implemented a resonator based upon microstrip cavities that permits the generation of microwaves with arbitrary polarization. Design, simulation, and implementation of the resonators were performed using standard printed circuit boards. The electric field distribution was mapped using a scanning probe cavity perturbation technique. Electron spin resonance using a standard marker was carried out in order to verify the polarization control from linear to circular.
△ Less
Submitted 11 October, 2007; v1 submitted 6 August, 2007;
originally announced August 2007.
-
Polarization-selective excitation of N-V centers in diamond
Authors:
T. P. Mayer Alegre,
C. Santori,
G. Medeiros-Ribeiro,
R. G. Beausoleil
Abstract:
The nitrogen-vacancy (N-V) center in diamond is promising as an electron spin qubit due to its long-lived coherence and optical addressability. The ground state is a spin triplet with two levels ($m_s = \pm 1$) degenerate at zero magnetic field. Polarization-selective microwave excitation is an attractive method to address the spin transitions independently, since this allows operation down to z…
▽ More
The nitrogen-vacancy (N-V) center in diamond is promising as an electron spin qubit due to its long-lived coherence and optical addressability. The ground state is a spin triplet with two levels ($m_s = \pm 1$) degenerate at zero magnetic field. Polarization-selective microwave excitation is an attractive method to address the spin transitions independently, since this allows operation down to zero magnetic field. Using a resonator designed to produce circularly polarized microwaves, we have investigated the polarization selection rules of the N-V center. We first apply this technique to N-V ensembles in [100] and [111]-oriented samples. Next, we demonstrate an imaging technique, based on optical polarization dependence, that allows rapid identification of the orientations of many single N-V centers. Finally, we test the microwave polarization selection rules of individual N-V centers of known orientation.
△ Less
Submitted 17 May, 2007; v1 submitted 14 May, 2007;
originally announced May 2007.
-
Lande g-tensor in semiconductor nanostructures
Authors:
T. P. Mayer Alegre,
F. G. G. Hernández,
A. L. C. Pereira,
G. Medeiros-Ribeiro
Abstract:
Understanding the electronic structure of semiconductor nanostructures is not complete without a detailed description of their corresponding spin-related properties. Here we explore the response of the shell structure of InAs self-assembled quantum dots to magnetic fields oriented in several directions, allowing the map** of the g-tensor modulus for the s and p shells. We found that the g-tens…
▽ More
Understanding the electronic structure of semiconductor nanostructures is not complete without a detailed description of their corresponding spin-related properties. Here we explore the response of the shell structure of InAs self-assembled quantum dots to magnetic fields oriented in several directions, allowing the map** of the g-tensor modulus for the s and p shells. We found that the g-tensors for the s and p shells show a very different behavior. The s-state in being more localized allows the probing of the confining potential details by swee** the magnetic field orientation from the growth direction towards the in-plane direction. As for the p-state, we found that the g-tensor modulus is closer to that of the surrounding GaAs, consistent with a larger delocalization. These results reveal further details of the confining potentials of self-assembled quantum dots that have not yet been probed, in addition to the assessment of the g-tensor, which is of fundamental importance for the implementation of spin related applications.
△ Less
Submitted 14 May, 2007; v1 submitted 25 April, 2006;
originally announced April 2006.
