-
Nanosecond Laser Annealing: impact on superconducting Silicon on Insulator epilayers
Authors:
Y. Baron,
J. L. Lábár,
S. Lequien,
B. Pécz,
R. Daubriac,
S. Kerdilés,
P. Acosta ALba,
C. Marcenat,
D. Débarre,
F. Lefloch,
F. Chiodi
Abstract:
We present superconducting monocrystalline Silicon On Insulator thin 33 nm epilayers. They are obtained by nanosecond laser annealing under ultra-high vacuum on 300 mm wafers heavily pre-implantated with boron ($2.5\times \,10^{16}\, at/cm^2$, 3 keV). Superconductivity is discussed in relation to the structural, electrical and material properties, a step towards the integration of ultra-doped supe…
▽ More
We present superconducting monocrystalline Silicon On Insulator thin 33 nm epilayers. They are obtained by nanosecond laser annealing under ultra-high vacuum on 300 mm wafers heavily pre-implantated with boron ($2.5\times \,10^{16}\, at/cm^2$, 3 keV). Superconductivity is discussed in relation to the structural, electrical and material properties, a step towards the integration of ultra-doped superconducting Si at large scale. In particular, we highlight the effect of the nanosecond laser annealing energy and the impact of multiple laser anneals. Increasing the energy leads to a linear increase of the layer thickness, and to the increase of the superconducting critical temperature $T_c$ from zero ($<35\, mK$) to $0.5\,K$. This value is comparable to superconducting Si layers realised by Gas Immersion Laser Do** where the dopants are incorporated without introducing the deep defects associated to implantation. Superconductivity only appears when the annealed depth is larger than the initial amorphous layer induced by the boron implantation. The number of subsequent anneals results in a more homogeneous do** with reduced amount of structural defects and increased conductivity. The quantitative analysis of $T_c$ concludes on a superconducting/ non superconducting bilayer, with an extremely low resistance interface. This highlights the possibility to couple efficiently superconducting Si to Si channels.
△ Less
Submitted 25 June, 2024;
originally announced June 2024.
-
Convergence of Manufacturing and Networking in Future Factories
Authors:
Ilaria Malanchini,
Nicola Michailow,
Patrick Agostini,
Janne Ali-Tolppa,
David Hock,
Martin Kasparick,
Alessandro Lieto,
Nikolaj Marchenko,
Alberto Martinez Alba,
Rastin Pries,
Qiuheng Zhou
Abstract:
The roll out of 5G has been mainly characterized by its distinct support for vertical industries, especially manufacturing. Leveraging synergies among these two worlds, namely production facilities and network systems, is a fundamental aspect to enable flexibility and economic viability in future factories. This work highlights the potential for intelligent networking and advanced machine learning…
▽ More
The roll out of 5G has been mainly characterized by its distinct support for vertical industries, especially manufacturing. Leveraging synergies among these two worlds, namely production facilities and network systems, is a fundamental aspect to enable flexibility and economic viability in future factories. This work highlights the potential for intelligent networking and advanced machine learning-based solutions in 5G-and-beyond systems in the context of Industry 4.0 and flexible manufacturing. The intersection thereof allows to create versatile machines and dynamic communication networks that can adapt to changes in the manufacturing process, factory layout and communication environment, supporting real-time interaction between humans, machines, and systems. We present a vision and corresponding framework by introducing the network-aware and production-aware principles, outlining results achieved in this context and summarizing them into three key use cases. Finally, we discuss a selection of remaining open challenges in private networks as well as give an outlook on future 6G research directions.
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
Uncertainty Quantification on Spent Nuclear Fuel with LMC
Authors:
Arnau Albà,
Andreas Adelmann,
Dimitri Rochman
Abstract:
The recently developed method Lasso Monte Carlo (LMC) for uncertainty quantification is applied to the characterisation of spent nuclear fuel. The propagation of nuclear data uncertainties to the output of calculations is an often required procedure in nuclear computations. Commonly used methods such as Monte Carlo, linear error propagation, or surrogate modelling suffer from being computationally…
▽ More
The recently developed method Lasso Monte Carlo (LMC) for uncertainty quantification is applied to the characterisation of spent nuclear fuel. The propagation of nuclear data uncertainties to the output of calculations is an often required procedure in nuclear computations. Commonly used methods such as Monte Carlo, linear error propagation, or surrogate modelling suffer from being computationally intensive, biased, or ill-suited for high-dimensional settings such as in the case of nuclear data. The LMC method combines multilevel Monte Carlo and machine learning to compute unbiased estimates of the uncertainty, at a lower computational cost than Monte Carlo, even in high-dimensional cases. Here LMC is applied to the calculations of decay heat, nuclide concentrations, and criticality of spent nuclear fuel placed in disposal canisters. The uncertainty quantification in this case is crucial to reduce the risks and costs of disposal of spent nuclear fuel. The results show that LMC is unbiased and has a higher accuracy than simple Monte Carlo.
△ Less
Submitted 1 September, 2023;
originally announced September 2023.
-
Fast Uncertainty Quantification of Spent Nuclear Fuel with Neural Networks
Authors:
Arnau Albà,
Andreas Adelmann,
Lucas Münster,
Dimitri Rochman,
Romana Boiger
Abstract:
The accurate calculation and uncertainty quantification of the characteristics of spent nuclear fuel (SNF) play a crucial role in ensuring the safety, efficiency, and sustainability of nuclear energy production, waste management, and nuclear safeguards. State of the art physics-based models, while reliable, are computationally intensive and time-consuming. This paper presents a surrogate modeling…
▽ More
The accurate calculation and uncertainty quantification of the characteristics of spent nuclear fuel (SNF) play a crucial role in ensuring the safety, efficiency, and sustainability of nuclear energy production, waste management, and nuclear safeguards. State of the art physics-based models, while reliable, are computationally intensive and time-consuming. This paper presents a surrogate modeling approach using neural networks (NN) to predict a number of SNF characteristics with reduced computational costs compared to physics-based models. An NN is trained using data generated from CASMO5 lattice calculations. The trained NN accurately predicts decay heat and nuclide concentrations of SNF, as a function of key input parameters, such as enrichment, burnup, cooling time between cycles, mean boron concentration and fuel temperature. The model is validated against physics-based decay heat simulations and measurements of different uranium oxide fuel assemblies from two different pressurized water reactors. In addition, the NN is used to perform sensitivity analysis and uncertainty quantification. The results are in very good alignment to CASMO5, while the computational costs (taking into account the costs of generating training samples) are reduced by a factor of 10 or more. Our findings demonstrate the feasibility of using NNs as surrogate models for fast characterization of SNF, providing a promising avenue for improving computational efficiency in assessing nuclear fuel behavior and associated risks.
△ Less
Submitted 16 August, 2023;
originally announced August 2023.
-
Physics-informed neural networks for pathloss prediction
Authors:
Steffen Limmer,
Alberto Martinez Alba,
Nicola Michailow
Abstract:
This paper introduces a physics-informed machine learning approach for pathloss prediction. This is achieved by including in the training phase simultaneously (i) physical dependencies between spatial loss field and (ii) measured pathloss values in the field. It is shown that the solution to a proposed learning problem improves generalization and prediction quality with a small number of neural ne…
▽ More
This paper introduces a physics-informed machine learning approach for pathloss prediction. This is achieved by including in the training phase simultaneously (i) physical dependencies between spatial loss field and (ii) measured pathloss values in the field. It is shown that the solution to a proposed learning problem improves generalization and prediction quality with a small number of neural network layers and parameters. The latter leads to fast inference times which are favorable for downstream tasks such as localization. Moreover, the physics-informed formulation allows training and prediction with a small amount of training data which makes it appealing for a wide range of practical pathloss prediction scenarios.
△ Less
Submitted 14 December, 2023; v1 submitted 23 November, 2022;
originally announced November 2022.
-
Lasso Monte Carlo, a Variation on Multi Fidelity Methods for High Dimensional Uncertainty Quantification
Authors:
Arnau Albà,
Romana Boiger,
Dimitri Rochman,
Andreas Adelmann
Abstract:
Uncertainty quantification (UQ) is an active area of research, and an essential technique used in all fields of science and engineering. The most common methods for UQ are Monte Carlo and surrogate-modelling. The former method is dimensionality independent but has slow convergence, while the latter method has been shown to yield large computational speedups with respect to Monte Carlo. However, su…
▽ More
Uncertainty quantification (UQ) is an active area of research, and an essential technique used in all fields of science and engineering. The most common methods for UQ are Monte Carlo and surrogate-modelling. The former method is dimensionality independent but has slow convergence, while the latter method has been shown to yield large computational speedups with respect to Monte Carlo. However, surrogate models suffer from the so-called curse of dimensionality, and become costly to train for high-dimensional problems, where UQ might become computationally prohibitive. In this paper we present a new technique, Lasso Monte Carlo (LMC), which combines a Lasso surrogate model with the multifidelity Monte Carlo technique, in order to perform UQ in high-dimensional settings, at a reduced computational cost. We provide mathematical guarantees for the unbiasedness of the method, and show that LMC can be more accurate than simple Monte Carlo. The theory is numerically tested with benchmarks on toy problems, as well as on a real example of UQ from the field of nuclear engineering. In all presented examples LMC is more accurate than simple Monte Carlo and other multifidelity methods. Thanks to LMC, computational costs are reduced by more than a factor of 5 with respect to simple MC, in relevant cases.
△ Less
Submitted 31 August, 2023; v1 submitted 7 October, 2022;
originally announced October 2022.
-
Regular projections of the link L6n1
Authors:
Andrea Alba,
Santino Ramirez,
Gelasio Salazar
Abstract:
Given a link projection $P$ and a link $L$, it is natural to ask whether it is possible that $P$ is a projection of $L$. Taniyama answered this question for the cases in which $L$ is a prime knot or link with crossing number at most five. Recently, Takimura settled the issue for the knot $6_2$. We answer this question for the case in which $L$ is the link $L6n1$.
Given a link projection $P$ and a link $L$, it is natural to ask whether it is possible that $P$ is a projection of $L$. Taniyama answered this question for the cases in which $L$ is a prime knot or link with crossing number at most five. Recently, Takimura settled the issue for the knot $6_2$. We answer this question for the case in which $L$ is the link $L6n1$.
△ Less
Submitted 29 August, 2022;
originally announced August 2022.
-
Microsecond non-melt UV laser annealing for future 3D-stacked CMOS
Authors:
Toshiyuki Tabata,
Fabien Rozé,
Louis Thuries,
Sebastien Halty,
Pierre-Edouard Raynal,
Karim Huet,
Fulvio Mazzamuto,
Abhijeet Joshi,
Bulent M. Basol,
Pablo Acosta Alba,
Sébastien Kerdilès
Abstract:
Three-dimensional (3D) CMOS technology encourages the use of UV laser annealing (UV-LA) because the shallow absorption of UV light into materials and the process timescale typically from nanoseconds (ns) to microseconds (us) strongly limit the vertical heat diffusion. In this work, us UV-LA solid phase epitaxial regrowth (SPER) demonstrated an active carrier concentration surpassing 1 x 10^21 at./…
▽ More
Three-dimensional (3D) CMOS technology encourages the use of UV laser annealing (UV-LA) because the shallow absorption of UV light into materials and the process timescale typically from nanoseconds (ns) to microseconds (us) strongly limit the vertical heat diffusion. In this work, us UV-LA solid phase epitaxial regrowth (SPER) demonstrated an active carrier concentration surpassing 1 x 10^21 at./cm^-3 in an arsenic ion-implanted silicon-on-insulator substrate. After the subsequent ns UV-LA known for improving CMOS interconnect, only a slight (about 5%) sheet resistance increase was observed. The results open a possibility to integrate UV-LA at different stages of 3D-stacked CMOS.
△ Less
Submitted 10 May, 2022;
originally announced May 2022.
-
Solid Phase Recrystallization in Arsenic Ion-Implanted Silicon-On-Insulator by Microsecond UV Laser Annealing
Authors:
Toshiyuki Tabata,
Fabien Rozé,
Pablo Acosta Alba,
Sebastien Halty,
Pierre-Edouard Raynal,
Imen Karmous,
Sébastien Kerdilés,
Fulvio Mazzamuto
Abstract:
UV laser annealing (UV-LA) enables surface-localized high-temperature thermal processing to form abrupt junctions in emerging monolithically stacked devices, where the applicable thermal budget is restricted. In this work, UV-LA is performed to regrow a silicon-on-insulator wafer partially amorphized by arsenic ion implantation as well as to activate the dopants. In a microsecond scale ( 10^-6 s t…
▽ More
UV laser annealing (UV-LA) enables surface-localized high-temperature thermal processing to form abrupt junctions in emerging monolithically stacked devices, where the applicable thermal budget is restricted. In this work, UV-LA is performed to regrow a silicon-on-insulator wafer partially amorphized by arsenic ion implantation as well as to activate the dopants. In a microsecond scale ( 10^-6 s to 10^-5 s) UV-LA process, monocrystalline solid phase recrystallization and dopant activation without junction deepening are evidenced, thus opening various applications in low thermal budget integration flows. However, some concerns remain. First, the surface morphology is degraded after the regrowth, possibly because of the non-perfect uniformity of the used laser beam and/or the formation of defects near the surface involving the excess dopants. Second, many of the dopants are inactive and seem to form deep levels in the Si band gap, suggesting a further optimization of the ion implantation condition to manage the initial crystal damage and the heating profile to better accommodate the dopants into the substitutional sites.
△ Less
Submitted 26 April, 2022;
originally announced April 2022.
-
Towards Automatic Construction of Filipino WordNet: Word Sense Induction and Synset Induction Using Sentence Embeddings
Authors:
Dan John Velasco,
Axel Alba,
Trisha Gail Pelagio,
Bryce Anthony Ramirez,
Unisse Chua,
Briane Paul Samson,
Jan Christian Blaise Cruz,
Charibeth Cheng
Abstract:
Wordnets are indispensable tools for various natural language processing applications. Unfortunately, wordnets get outdated, and producing or updating wordnets can be slow and costly in terms of time and resources. This problem intensifies for low-resource languages. This study proposes a method for word sense induction and synset induction using only two linguistic resources, namely, an unlabeled…
▽ More
Wordnets are indispensable tools for various natural language processing applications. Unfortunately, wordnets get outdated, and producing or updating wordnets can be slow and costly in terms of time and resources. This problem intensifies for low-resource languages. This study proposes a method for word sense induction and synset induction using only two linguistic resources, namely, an unlabeled corpus and a sentence embeddings-based language model. The resulting sense inventory and synonym sets can be used in automatically creating a wordnet. We applied this method on a corpus of Filipino text. The sense inventory and synsets were evaluated by matching them with the sense inventory of the machine translated Princeton WordNet, as well as comparing the synsets to the Filipino WordNet. This study empirically shows that the 30% of the induced word senses are valid and 40% of the induced synsets are valid in which 20% are novel synsets.
△ Less
Submitted 19 October, 2023; v1 submitted 7 April, 2022;
originally announced April 2022.
-
Benchmarking Collective Effects of Electron Interactions in a Wiggler with OPAL-FEL
Authors:
Arnau Albà,
Jimin Seok,
Andreas Adelmann,
Scott Doran,
Gwanghui Ha,
Soonhong Lee,
Yinghu Piao,
John Power,
Maofei Qian,
Eric Wisniewski,
Joseph Xu,
Alexander Zholents
Abstract:
OPAL-FEL is a recently developed tool for the modeling of particle accelerators containing wigglers or undulators. It extends the well established 3D electrostatic particle-tracking code OPAL, by merging it with the finite-difference time-domain electromagnetic solver MITHRA. We present results of two benchmark cases where OPAL-FEL simulations are compared to experimental results. Both experiments…
▽ More
OPAL-FEL is a recently developed tool for the modeling of particle accelerators containing wigglers or undulators. It extends the well established 3D electrostatic particle-tracking code OPAL, by merging it with the finite-difference time-domain electromagnetic solver MITHRA. We present results of two benchmark cases where OPAL-FEL simulations are compared to experimental results. Both experiments concern electron beamlines where the longitudinal phase space is modulated with a short magnetic wiggler. Good agreement was found in both the space charge and radiation dominated regimes.
△ Less
Submitted 4 December, 2021;
originally announced December 2021.
-
Solid Phase Recrystallization and Dopant Activation in Arsenic Ion-Implanted Silicon-On-Insulator by UV Laser Annealing
Authors:
Toshiyuki Tabata,
Fabien Rozé,
Pablo Acosta Alba,
Sébastien Halty,
Pierre-Edouard Raynal,
Imen Karmous,
Sébastien Kerdilès,
Fulvio Mazzamuto
Abstract:
UV laser annealing (UV-LA) enables surface-localized high-temperature thermal processing to form abrupt junctions in emerging monolithically stacked devices, where applicable thermal budget is restricted. In this work, UV-LA is performed to regrow a SOI layer partially amorphized by arsenic ion implantation and to activate the dopants. In a microsecond scale (~10^-6 s to ~10^-5 s) UV-LA process, m…
▽ More
UV laser annealing (UV-LA) enables surface-localized high-temperature thermal processing to form abrupt junctions in emerging monolithically stacked devices, where applicable thermal budget is restricted. In this work, UV-LA is performed to regrow a SOI layer partially amorphized by arsenic ion implantation and to activate the dopants. In a microsecond scale (~10^-6 s to ~10^-5 s) UV-LA process, monocrystalline solid phase recrystallization and dopant activation without junction deepening is evidenced, thus opening various applications in low thermal budget integration flows.
△ Less
Submitted 15 November, 2021;
originally announced November 2021.
-
SAUCE: Truncated Sparse Document Signature Bit-Vectors for Fast Web-Scale Corpus Expansion
Authors:
Muntasir Wahed,
Daniel Gruhl,
Alfredo Alba,
Anna Lisa Gentile,
Petar Ristoski,
Chad Deluca,
Steve Welch,
Ismini Lourentzou
Abstract:
Recent advances in text representation have shown that training on large amounts of text is crucial for natural language understanding. However, models trained without predefined notions of topical interest typically require careful fine-tuning when transferred to specialized domains. When a sufficient amount of within-domain text may not be available, expanding a seed corpus of relevant documents…
▽ More
Recent advances in text representation have shown that training on large amounts of text is crucial for natural language understanding. However, models trained without predefined notions of topical interest typically require careful fine-tuning when transferred to specialized domains. When a sufficient amount of within-domain text may not be available, expanding a seed corpus of relevant documents from large-scale web data poses several challenges. First, corpus expansion requires scoring and ranking each document in the collection, an operation that can quickly become computationally expensive as the web corpora size grows. Relying on dense vector spaces and pairwise similarity adds to the computational expense. Secondly, as the domain concept becomes more nuanced, capturing the long tail of domain-specific rare terms becomes non-trivial, especially under limited seed corpora scenarios.
In this paper, we consider the problem of fast approximate corpus expansion given a small seed corpus with a few relevant documents as a query, with the goal of capturing the long tail of a domain-specific set of concept terms. To efficiently collect large-scale domain-specific corpora with limited relevance feedback, we propose a novel truncated sparse document bit-vector representation, termed Signature Assisted Unsupervised Corpus Expansion (SAUCE). Experimental results show that SAUCE can reduce the computational burden while ensuring high within-domain lexical coverage.
△ Less
Submitted 26 August, 2021;
originally announced August 2021.
-
Laser Processing For 3D Junctionless Transistor Fabrication
Authors:
D. Bosch,
P. Acosta Alba,
S. Kerdiles,
V. Benevent,
C. Perrot,
J. Lassarre,
J. Richy,
J. Lacord,
B. Sklenard,
L. Brunet,
P. Batude,
C. Fenouillet-Beranger,
D. Lattard,
J. P. Colinge,
F. Balestra,
F. Andrieu
Abstract:
To take fully advantage of Junctionless transistor (JLT) low-cost and low-temperature features we investigate a 475 degC process to create onto a wafer a thin poly-Si layer on insulator. We fabricated a 13nm doped (Phosphorous, 1E19 at/cm3) poly-silicon film featuring excellent roughness values (Rmax= 1.6nm and RMS=0.2nm). Guidelines for grain size optimization using nanosecond (ns) laser annealin…
▽ More
To take fully advantage of Junctionless transistor (JLT) low-cost and low-temperature features we investigate a 475 degC process to create onto a wafer a thin poly-Si layer on insulator. We fabricated a 13nm doped (Phosphorous, 1E19 at/cm3) poly-silicon film featuring excellent roughness values (Rmax= 1.6nm and RMS=0.2nm). Guidelines for grain size optimization using nanosecond (ns) laser annealing are given.
△ Less
Submitted 30 November, 2020;
originally announced November 2020.
-
Hyper-doped silicon nanoantennas and metasurfaces for tunable infrared plasmonics
Authors:
Jean-Marie Poumirol,
Clément Majorel,
Nicolas Chery,
Christian Girard,
Peter R. Wiecha,
Nicolas Mallet,
Guilhem Larrieu,
Fuccio Cristiano,
Richard Monflier,
Anne-Sophie Royet,
Pablo Acosta Alba,
Sébastien Kerdiles,
Vincent Paillard,
Caroline Bonafos
Abstract:
We present the experimental realization of ordered arrays of hyper-doped silicon nanodisks, which exhibit a localized surface plasmon resonance. The plasmon is widely tunable in a spectral window between 2 and 5 $μ$m by adjusting the free carrier concentration between 10$^{20}$ and 10$^{21}$ cm$^{-3}$. We show that strong infrared light absorption can be achieved with all-silicon plasmonic metasur…
▽ More
We present the experimental realization of ordered arrays of hyper-doped silicon nanodisks, which exhibit a localized surface plasmon resonance. The plasmon is widely tunable in a spectral window between 2 and 5 $μ$m by adjusting the free carrier concentration between 10$^{20}$ and 10$^{21}$ cm$^{-3}$. We show that strong infrared light absorption can be achieved with all-silicon plasmonic metasurfaces employing nano-structures with dimensions as low as 100\,nm in diameter and 23 nm in height. Our numerical simulations show an excellent agreement with the experimental data and provide physical insights on the impact of the nanostructure shape as well as of near-field effects on the optical properties of the metasurface. Our results open highly promising perspectives for integrated all-silicon-based plasmonic devices for instance for chemical or biological sensing or for thermal imaging.
△ Less
Submitted 9 March, 2021; v1 submitted 16 November, 2020;
originally announced November 2020.
-
A-Phase classification using convolutional neural networks
Authors:
Edgar R. Arce-Santana,
Alfonso Alba,
Martin O. Mendez,
Valdemar Arce-Guevara
Abstract:
A series of short events, called A-phases, can be observed in the human electroencephalogram during NREM sleep. These events can be classified in three groups (A1, A2 and A3) according to their spectral contents, and are thought to play a role in the transitions between the different sleep stages. A-phase detection and classification is usually performed manually by a trained expert, but it is a t…
▽ More
A series of short events, called A-phases, can be observed in the human electroencephalogram during NREM sleep. These events can be classified in three groups (A1, A2 and A3) according to their spectral contents, and are thought to play a role in the transitions between the different sleep stages. A-phase detection and classification is usually performed manually by a trained expert, but it is a tedious and time-consuming task. In the past two decades, various researchers have designed algorithms to automatically detect and classify the A-phases with varying degrees of success, but the problem remains open. In this paper, a different approach is proposed: instead of attempting to design a general classifier for all subjects, we propose to train ad-hoc classifiers for each subject using as little data as possible, in order to drastically reduce the amount of time required from the expert. The proposed classifiers are based on deep convolutional neural networks using the log-spectrogram of the EEG signal as input data. Results are encouraging, achieving average accuracies of 80.31% when discriminating between A-phases and non A-phases, and 71.87% when classifying among A-phase sub-types, with only 25% of the total A-phases used for training. When additional expert-validated data is considered, the sub-type classification accuracy increases to 78.92%. These results show that a semi-automatic annotation system with assistance from an expert could provide a better alternative to fully automatic classifiers.
△ Less
Submitted 22 July, 2019;
originally announced July 2019.
-
Holographic Plasmon Relaxation with and without Broken Translations
Authors:
Matteo Baggioli,
Ulf Gran,
Amadeo Jimenez Alba,
Marcus Tornsö,
Tobias Zingg
Abstract:
We study the dynamics and the relaxation of bulk plasmons in strongly coupled and quantum critical systems using the holographic framework. We analyze the dispersion relation of the plasmonic modes in detail for an illustrative class of holographic bottom-up models. Comparing to a simple hydrodynamic formula, we entangle the complicated interplay between the three least damped modes and shed light…
▽ More
We study the dynamics and the relaxation of bulk plasmons in strongly coupled and quantum critical systems using the holographic framework. We analyze the dispersion relation of the plasmonic modes in detail for an illustrative class of holographic bottom-up models. Comparing to a simple hydrodynamic formula, we entangle the complicated interplay between the three least damped modes and shed light on the underlying physical processes. Such as the dependence of the plasma frequency and the effective relaxation time in terms of the electromagnetic coupling, the charge and the temperature of the system. Introducing momentum dissipation, we then identify its additional contribution to the dam**. Finally, we consider the spontaneous symmetry breaking (SSB) of translational invariance. Upon dialing the strength of the SSB, we observe an increase of the longitudinal sound speed controlled by the elastic moduli and a decrease in the plasma frequency of the gapped plasmon. We comment on the condensed matter interpretation of this mechanism.
△ Less
Submitted 18 August, 2019; v1 submitted 2 May, 2019;
originally announced May 2019.
-
Admission Control based Traffic-Agnostic Delay-Constrained Random Access (AC/DC-RA) for M2M Communication
Authors:
H. Murat Gürsu,
Mikhail Vilgelm,
Alberto M. Alba,
Matteo Berioli,
Wolfgang Kellerer
Abstract:
The problem of wireless M2M communication is twofold: the reliability aspect and the scalability aspect. The solution of this problem demands a delay constrained random access protocol. To this end we propose Admission Control based Traffic Agnostic Delay Constrained Random Access (AC/DC-RA) protocol. Our main contribution is enabling the stochastic delay constraints agnostic to the traffic, such…
▽ More
The problem of wireless M2M communication is twofold: the reliability aspect and the scalability aspect. The solution of this problem demands a delay constrained random access protocol. To this end we propose Admission Control based Traffic Agnostic Delay Constrained Random Access (AC/DC-RA) protocol. Our main contribution is enabling the stochastic delay constraints agnostic to the traffic, such that the stochastic delay constraint is valid with respect to varying number of arrivals. We achieve this with an admission control decision that uses a novel collision estimation algorithm for active number of arrivals per contention resource. We use an adaptive contention resolution algorithm to react to the varying number of arrivals. Using these tools, the admission control solves the stability problem. We show with simulations that AC/DC-RA provide stochastic delay constrained random access in a traffic agnostic way to sustain a stable performance against Poisson and Beta arrivals without any modification to the protocol.
△ Less
Submitted 27 March, 2019;
originally announced March 2019.
-
Delay Analysis of Multichannel Parallel Contention Tree Algorithms (MP-CTA)
Authors:
Murat Gürsu,
Alberto Martínez Alba,
Wolfgang Kellerer
Abstract:
Contention tree algorithm is initially invented as a solution to improve the stable throughput problem of Slotted ALOHA in multiple access schemes. Even though the throughput is stabilized in tree algorithms, the delay of requests may grow to infinity with respect to the arrival rate of the system. Delay depends heavily on the exploration of the tree structure, i.e., breadth search, or depth searc…
▽ More
Contention tree algorithm is initially invented as a solution to improve the stable throughput problem of Slotted ALOHA in multiple access schemes. Even though the throughput is stabilized in tree algorithms, the delay of requests may grow to infinity with respect to the arrival rate of the system. Delay depends heavily on the exploration of the tree structure, i.e., breadth search, or depth search. Breadth search is necessary for faster exploration of tree. The analytical probability distribution of delay, which is available mostly for depth search, is not generalizable to all breadth search. In this paper we fill this gap through though arbitrary grou** of branches and including this in the delay analysis. This enables obtaining the delay analysis of any contention tree algorithm that runs a breadth first search exploration. We show through simulations that the analysis is in agreement with the realizations.
△ Less
Submitted 31 July, 2017;
originally announced July 2017.
-
Gravitational lensing reveals extreme dust-obscured star formation in quasar host galaxies
Authors:
H. R. Stacey,
J. P. McKean,
N. C. Robertson,
R. J. Ivison,
K. G. Isaak,
D. R. G. Schleicher,
P. P. van der Werf,
W. A. Baan,
A. Berciano Alba,
M. A. Garrett,
A. F. Loenen
Abstract:
We have observed 104 gravitationally-lensed quasars at $z\sim1-4$ with Herschel/SPIRE, the largest such sample ever studied. By targeting gravitational lenses, we probe intrinsic far-infrared (FIR) luminosities and star formation rates (SFRs) more typical of the population than the extremely luminous sources that are otherwise accessible. We detect 72 objects with Herschel/SPIRE and find 66 percen…
▽ More
We have observed 104 gravitationally-lensed quasars at $z\sim1-4$ with Herschel/SPIRE, the largest such sample ever studied. By targeting gravitational lenses, we probe intrinsic far-infrared (FIR) luminosities and star formation rates (SFRs) more typical of the population than the extremely luminous sources that are otherwise accessible. We detect 72 objects with Herschel/SPIRE and find 66 percent (69 sources) of the sample have spectral energy distributions (SEDs) characteristic of dust emission. For 53 objects with sufficiently constrained SEDs, we find a median effective dust temperature of $38^{+12}_{-5}$ K. By applying the radio-infrared correlation, we find no evidence for an FIR excess which is consistent with star-formation-heated dust. We derive a median magnification-corrected FIR luminosity of $3.6^{+4.8}_{-2.4}~\times 10^{11}~{\rm L_{\odot}}$ and median SFR of $120^{+160}_{-80}~{\rm M_{\odot}~yr^{-1}}$ for 94 quasars with redshifts. We find $\sim10$ percent of our sample have FIR properties similar to typical dusty star-forming galaxies at $z\sim2-3$ and a range of SFRs $<20-10000~{\rm M_{\odot}~yr^{-1}}$ for our sample as a whole. These results are in line with current models of quasar evolution and suggests a coexistence of dust-obscured star formation and AGN activity is typical of most quasars. We do not find a statistically-significant difference in the FIR luminosities of quasars in our sample with a radio excess relative to the radio-infrared correlation. Synchrotron emission is found to dominate at FIR wavelengths for $<15$ percent of those sources classified as powerful radio galaxies.
△ Less
Submitted 19 February, 2018; v1 submitted 30 May, 2017;
originally announced May 2017.
-
Measuring gravitational lens time delays using low-resolution radio monitoring observations
Authors:
G. Gurkan,
N. Jackson,
L. V. E. Koopmans,
C. D. Fassnacht,
A. Berciano Alba
Abstract:
Obtaining lensing time delay measurements requires long-term monitoring campaigns with a high enough resolution (< 1 arcsec) to separate the multiple images. In the radio, a limited number of high-resolution interferometer arrays make these observations difficult to schedule. To overcome this problem, we propose a technique for measuring gravitational time delays which relies on monitoring the tot…
▽ More
Obtaining lensing time delay measurements requires long-term monitoring campaigns with a high enough resolution (< 1 arcsec) to separate the multiple images. In the radio, a limited number of high-resolution interferometer arrays make these observations difficult to schedule. To overcome this problem, we propose a technique for measuring gravitational time delays which relies on monitoring the total flux density with low-resolution but high-sensitivity radio telescopes to follow the variation of the brighter image. This is then used to trigger high-resolution observations in optimal numbers which then reveal the variation in the fainter image. We present simulations to assess the efficiency of this method together with a pilot project observing radio lens systems with the Westerbork Synthesis Radio Telescope (WSRT) to trigger Very Large Array (VLA) observations. This new method is promising for measuring time delays because it uses relatively small amounts of time on high-resolution telescopes. This will be important because instruments that have high sensitivity but limited resolution, together with an optimum usage of followup high-resolution observations from appropriate radio telescopes may in the future be useful for gravitational lensing time delay measurements by means of this new method.
△ Less
Submitted 19 March, 2014;
originally announced March 2014.
-
Discovery of "Warm Dust" Galaxies in Clusters at z~0.3: Evidence for Strip** of Cool Dust in the Dense Environment?
Authors:
T. D. Rawle,
M. Rex,
E. Egami,
S. M. Chung,
P. G. Pérez-González,
I. Smail,
G. Walth,
B. Altieri,
P. Appleton,
A. Berciano Alba,
A. W. Blain,
M. Dessauges-Zavadsky,
D. Fadda,
A. H. Gonzalez,
M. J. Pereira,
I. Valtchanov,
P. P. van der Werf,
M. Zemcov
Abstract:
Using far-infrared imaging from the "Herschel Lensing Survey", we derive dust properties of spectroscopically-confirmed cluster member galaxies within two massive systems at z~0.3: the merging Bullet Cluster and the more relaxed MS2137.3-2353. Most star-forming cluster sources (~90%) have characteristic dust temperatures similar to local field galaxies of comparable infrared (IR) luminosity (T_dus…
▽ More
Using far-infrared imaging from the "Herschel Lensing Survey", we derive dust properties of spectroscopically-confirmed cluster member galaxies within two massive systems at z~0.3: the merging Bullet Cluster and the more relaxed MS2137.3-2353. Most star-forming cluster sources (~90%) have characteristic dust temperatures similar to local field galaxies of comparable infrared (IR) luminosity (T_dust ~ 30K). Several sub-LIRG (L_IR < 10^11 L_sun) Bullet Cluster members are much warmer (T_dust > 37K) with far-infrared spectral energy distribution (SED) shapes resembling LIRG-type local templates. X-ray and mid-infrared data suggest that obscured active galactic nuclei do not contribute significantly to the infrared flux of these "warm dust" galaxies. Sources of comparable IR-luminosity and dust temperature are not observed in the relaxed cluster MS2137, although the significance is too low to speculate on an origin involving recent cluster merging. "Warm dust" galaxies are, however, statistically rarer in field samples (> 3sigma), indicating that the responsible mechanism may relate to the dense environment. The spatial distribution of these sources is similar to the whole far-infrared bright population, i.e. preferentially located in the cluster periphery, although the galaxy hosts tend towards lower stellar masses (M_* < 10^10 M_sun). We propose dust strip** and heating processes which could be responsible for the unusually warm characteristic dust temperatures. A normal star-forming galaxy would need 30-50% of its dust removed (preferentially stripped from the outer reaches, where dust is typically cooler) to recover a SED similar to a "warm dust" galaxy. These progenitors would not require a higher IR-luminosity or dust mass than the currently observed normal star-forming population.
△ Less
Submitted 9 July, 2012;
originally announced July 2012.
-
A bright z=5.2 lensed submillimeter galaxy in the field of Abell 773: HLSJ091828.6+514223
Authors:
F. Combes,
M. Rex,
T. D. Rawle,
E. Egami,
F. Boone,
I. Smail,
J. Richard,
R. J. Ivison,
M. Gurwell,
C. M. Casey,
A. Omont,
A. Berciano Alba,
M. Dessauges-Zavadsky,
A. C. Edge,
G. G. Fazio,
J-P. Kneib,
N. Okabe,
R. Pello,
P. G. Perez-Gonzalez,
D. Schaerer,
G. P. Smith,
A. M. Swinbank,
P. van der Werf
Abstract:
During our Herschel Lensing Survey (HLS) of massive galaxy clusters, we have discovered an exceptionally bright source behind the z=0.22 cluster Abell 773, which appears to be a strongly lensed submillimeter galaxy (SMG) at z=5.2429. This source is unusual compared to most other lensed sources discovered by Herschel so far, because of its higher submm flux (\sim 200mJy at 500\micron) and its high…
▽ More
During our Herschel Lensing Survey (HLS) of massive galaxy clusters, we have discovered an exceptionally bright source behind the z=0.22 cluster Abell 773, which appears to be a strongly lensed submillimeter galaxy (SMG) at z=5.2429. This source is unusual compared to most other lensed sources discovered by Herschel so far, because of its higher submm flux (\sim 200mJy at 500\micron) and its high redshift. The dominant lens is a foreground z=0.63 galaxy, not the cluster itself. The source has a far-infrared (FIR) luminosity of L_FIR= 1.1 10^{14}/μLo, where μis the magnification factor, likely \sim 11. We report here the redshift identification through CO lines with the IRAM-30m, and the analysis of the gas excitation, based on CO(7-6), CO(6-5), CO(5-4) detected at IRAM and the CO(2-1) at the EVLA. All lines decompose into a wide and strong red component, and a narrower and weaker blue component, 540\kms apart. Assuming the ultraluminous galaxy (ULIRG) CO-to-H2 conversion ratio, the H2 mass is 5.8 10^{11}/μMo, of which one third is in a cool component. From the CI line we derive a CI/H2 number abundance of 6 10^{-5} similar to that in other ULIRGs. The H2O line is strong only in the red velocity component, with an intensity ratio I(H_2O)/I(CO) \sim 0.5, suggesting a strong local FIR radiation field, possibly from an active nucleus (AGN) component. We detect the [NII]205\mics line for the first time at high-z. It shows comparable blue and red components, with a strikingly broad blue one, suggesting strong ionized gas flows.
△ Less
Submitted 18 January, 2012; v1 submitted 13 January, 2012;
originally announced January 2012.
-
Water vapor emission reveals a highly obscured, star forming nuclear region in the QSO host galaxy APM08279+5255 at z=3.9
Authors:
Paul P. van der Werf,
Alicia Berciano Alba,
Marco Spaans,
Edo Loenen,
Rowin Meijerink,
Dominik Riechers,
Pierre Cox,
Axel Weiss,
Fabian Walter
Abstract:
We present the detection of four rotational emission lines of water vapor, from energy levels Eu/k= 101 - 454 K, in the gravitationally lensed z=3.9 QSO host galaxy APM08279+5255. While the lowest H2O lines are collisionally excited in clumps of warm, dense gas (density of hydrogen nuclei n_H=(3.1 +/- 1.2) x 10^6 cm^-3, gas temperature T_g ~ 105 +/- 21 K), we find that the excitation of the higher…
▽ More
We present the detection of four rotational emission lines of water vapor, from energy levels Eu/k= 101 - 454 K, in the gravitationally lensed z=3.9 QSO host galaxy APM08279+5255. While the lowest H2O lines are collisionally excited in clumps of warm, dense gas (density of hydrogen nuclei n_H=(3.1 +/- 1.2) x 10^6 cm^-3, gas temperature T_g ~ 105 +/- 21 K), we find that the excitation of the higher lines is dominated by the intense local infrared radiation field. Since only collisionally excited emission contributes to gas cooling, we conclude that H2O is not a significant coolant of the warm molecular gas. Our excitation model requires the radiatively excited gas to be located in an extended region of high 100 micron opacity (tau_100 = 0.9 +/- 0.2). Locally, such extended infrared-opaque regions are found only in the nuclei of ultraluminous infrared galaxies. We propose a model where the infrared-opaque circumnuclear cloud, which is penetrated by the X-ray radiation field of the QSO nucleus, contains clumps of massive star formation where the H2O emission originates. The radiation pressure from the intense local infrared radiation field exceeds the thermal gas pressure by about an order of magnitude, suggesting close to Eddington-limited star formation in these clumps.
△ Less
Submitted 27 September, 2011; v1 submitted 23 June, 2011;
originally announced June 2011.
-
A new perspective on the submillimetre galaxy MM 18423+5938 at redshift 3.9296 from radio continuum imaging
Authors:
J. P. McKean,
A. Berciano Alba,
F. Volino,
V. Tudose,
M. A. Garrett,
A. F. Loenen,
Z. Paragi,
O. Wucknitz
Abstract:
The bright submillimetre (sub-mm) galaxy MM 18423+5938 at redshift 3.9296 has been predicted from mid-infrared and millimetre photometry to have an exceptionally large total infrared (IR) luminosity. We present new radio imaging at 1.4 GHz with the Westerbork Synthesis Radio Telescope that is used to determine a radio-derived total IR luminosity for MM 18423+5938 via the well established radio-far…
▽ More
The bright submillimetre (sub-mm) galaxy MM 18423+5938 at redshift 3.9296 has been predicted from mid-infrared and millimetre photometry to have an exceptionally large total infrared (IR) luminosity. We present new radio imaging at 1.4 GHz with the Westerbork Synthesis Radio Telescope that is used to determine a radio-derived total IR luminosity for MM 18423+5938 via the well established radio-far-infrared correlation. The flux density is found to be S_1.4 GHz = 217 +/- 37 μJy, which corresponds to a rest-frame luminosity density of L_1.4 GHz = 2.32 +/- 0.40 x 10^25 / u W / Hz, where u is the magnification from a probable gravitational lens. The radio-derived total IR luminosity and star-formation rate are L_8-1000 μm = 5.6^+4.1_-2.4 x 10^13 / u L_sol and SFR = 9.4^+7.4_-4.9 x 10^3 / u M_sol / yr, respectively, which are ~9 times smaller than those previously reported. These differences are attributed to the IR spectral energy distribution of MM 18423+5938 being poorly constrained by the limited number of reliable photometric data that are currently available, and from a previous misidentification of the object at 70 μm. Using the radio derived total IR luminosity as a constraint, the temperature of the cold dust component is found to be T ~ 24^+7_-5 K for a dust emissivity of β= 1.5 +/- 0.5. The radio-derived properties of this galaxy are still large given the low excitation temperature implied by the CO emission lines and the temperature of the cold dust. Therefore, we conclude that MM 18423+5938 is probably gravitationally lensed.
△ Less
Submitted 6 June, 2011; v1 submitted 2 March, 2011;
originally announced March 2011.
-
On combinatorial expansion of the conformal blocks arising from AGT conjecture
Authors:
V. A. Alba,
V. A. Fateev,
A. V. Litvinov,
G. M. Tarnopolsky
Abstract:
In their recent paper \cite{Alday:2009aq} Alday, Gaiotto and Tachikawa proposed a relation between $\mathcal{N}=2$ four-dimensional supersymmetric gauge theories and two-dimensional conformal field theories. As part of their conjecture they gave an explicit combinatorial formula for the expansion of the conformal blocks inspired from the exact form of instanton part of the Nekrasov partition funct…
▽ More
In their recent paper \cite{Alday:2009aq} Alday, Gaiotto and Tachikawa proposed a relation between $\mathcal{N}=2$ four-dimensional supersymmetric gauge theories and two-dimensional conformal field theories. As part of their conjecture they gave an explicit combinatorial formula for the expansion of the conformal blocks inspired from the exact form of instanton part of the Nekrasov partition function. In this paper we study the origin of such an expansion from a CFT point of view. We consider the algebra $\mathcal{A}=\text{\sf Vir}\otimes\mathcal{H}$ which is the tensor product of mutually commuting Virasoro and Heisenberg algebras and discover the special orthogonal basis of states in the highest weight representations of $\mathcal{A}$. The matrix elements of primary fields in this basis have a very simple factorized form and coincide with the function called $Z_{\text{\sf{bif}}}$ appearing in the instanton counting literature. Having such a simple basis, the problem of computation of the conformal blocks simplifies drastically and can be shown to lead to the expansion proposed in \cite{Alday:2009aq}. We found that this basis diagonalizes an infinite system of commuting Integrals of Motion related to Benjamin-Ono integrable hierarchy.
△ Less
Submitted 10 May, 2011; v1 submitted 6 December, 2010;
originally announced December 2010.
-
A method for efficient measurement of gravitational lens time delays
Authors:
G. Gürkan,
N. Jackson,
I. W. A. Browne,
L. V. E. Koopmans,
C. D. Fassnacht,
A. Berciano Alba
Abstract:
The Hubble constant value is currently known to 10% accuracy unless assumptions are made for the cosmology (Sandage et al. 2006). Gravitational lens systems provide another probe of the Hubble constant using time delay measurements. However, current investigations of ~20 time delay lenses, albeit of varying levels of sophistication, have resulted in different values of the Hubble constant ranging…
▽ More
The Hubble constant value is currently known to 10% accuracy unless assumptions are made for the cosmology (Sandage et al. 2006). Gravitational lens systems provide another probe of the Hubble constant using time delay measurements. However, current investigations of ~20 time delay lenses, albeit of varying levels of sophistication, have resulted in different values of the Hubble constant ranging from 50-80 km/s/Mpc. In order to reduce uncertainties, more time delay measurements are essential together with better determined mass models (Oguri 2007, Saha et al. 2006). We propose a more efficient technique for measuring time delays which does not require regular monitoring with a high-resolution interferometer array. The method uses double image and long-axis quadruple lens systems in which the brighter component varies first and dominates the total flux density. Monitoring the total flux density with low-resolution but high sensitivity radio telescopes provides the variation of the brighter image and is used to trigger high-resolution observations which can then be used to see the variation in the fainter image. We present simulations of this method together with a pilot project using the WSRT (Westerbork Radio Synthesis Telescope) to trigger VLA (Very Large Array) observations. This new method is promising for measuring time delays because it uses relatively small amounts of time on high-resolution telescopes. This will be important because many SKA pathfinder telescopes, such as MeerKAT (Karoo Array Telescope) and ASKAP (Australian Square Kilometre Array Pathfinder), have high sensitivity but limited resolution.
△ Less
Submitted 30 November, 2010;
originally announced November 2010.
-
Radio counterpart of the lensed sub-mm emission in the cluster MS0451.6-0305: new evidence for the merger scenario
Authors:
A. Berciano Alba,
L. V. E. Koopmans,
M. A. Garrett,
O. Wucknitz,
M. Limousin
Abstract:
SMM J04542-0301 is an extended (~1 arcmin) sub-mm source located near the core of the cluster MS0451.6-0305. It has been suggested that part of its emission arises from the interaction between a LBG and two EROs at z~2.9 that are multiply-imaged. However, the dramatic resolution difference between the sub-mm map and the optical/NIR images make it difficult to confirm this hypothesis. In this pap…
▽ More
SMM J04542-0301 is an extended (~1 arcmin) sub-mm source located near the core of the cluster MS0451.6-0305. It has been suggested that part of its emission arises from the interaction between a LBG and two EROs at z~2.9 that are multiply-imaged. However, the dramatic resolution difference between the sub-mm map and the optical/NIR images make it difficult to confirm this hypothesis. In this paper, we present a deep (~ 10 microJy/beam), high resolution (~2 arcsec) 1.4 GHz radio map of the cluster core, in which we have identified 6 sources located within SMM J04542-0301. The strong lensing effect in the radio data has been quantified by constructing a new lens model of the cluster. The brightest and most extended of these sources (RJ) is located in the middle of the sub-mm emission, and has no obvious counterpart in the optical/NIR. Three other detections (E1, E2 and E3) seem to be associated with the images of one of the EROs. The last two detections (CR1 and CR2), for which no optical/NIR counterpart have been found, seem to constitute two relatively compact emitting regions embedded in a ~5 arcsec extended radio source located at the position of the sub-mm peak. The presence of this extended component can only be explained if it is being produced by a lensed region of dust obscured star formation in the center of the merger. A comparison between the radio and sub-mm data at the same resolution suggests that E1, E2, E3, CR1 and CR2 are associated with the sub-mm emission. The radio observations provide strong observational evidence in favor of the merger hypothesis. However, the question if RJ is also contributing to the observed sub-mm emission remains open. These results illustrate the promising prospects for radio interferometry and strong gravitational lensing to study the internal structure of SMGs.
△ Less
Submitted 7 October, 2009;
originally announced October 2009.
-
On the abundance of gravitational arcs produced by submillimeter galaxies at radio and submm wavelengths
Authors:
C. Fedeli,
A. Berciano Alba
Abstract:
We predict the abundance of giant gravitational arcs produced by submillimeter galaxies (SMGs) lensed by foreground galaxy clusters, both at radio and submm wavelengths. The galaxy cluster population is modeled in a realistic way with the use of semi-analytic merger trees, while the density profiles of individual deflectors take into account ellipticity and substructures. The adopted typical siz…
▽ More
We predict the abundance of giant gravitational arcs produced by submillimeter galaxies (SMGs) lensed by foreground galaxy clusters, both at radio and submm wavelengths. The galaxy cluster population is modeled in a realistic way with the use of semi-analytic merger trees, while the density profiles of individual deflectors take into account ellipticity and substructures. The adopted typical size of the radio and submm emitting regions of SMGs is based on current radio/CO observations and the FIR-radio correlation. The source redshift distribution has been modeled using three different functions (based on spectroscopic/photometric redshift measurements and a simple evolutionary model) to quantify the effect of a high redshift tail on the number of arcs. The source number counts are compatible with currently available observations, and were suitably distorted to take into account the lensing magnification bias. We present tables and plots for the numbers of radio and submm arcs produced by SMGs as a function of surface brightness, useful for the planning of future surveys aimed at arc statistics studies. They show that e.g., the detection of several hundred submm arcs on the whole sky with a signal-to-noise ratio of at least 5 requires a sensitivity of 1 mJy arcsec$^{-2}$ at $850 μ$m. Approximately the same number of radio arcs should be detected with the same signal-to-noise ratio with a surface brightness threshold of $20 μ$Jy arcsec$^{-2}$ at 1.4 GHz. Comparisons of these results with previous work found in the literature are also discussed.
△ Less
Submitted 7 October, 2009; v1 submitted 14 July, 2009;
originally announced July 2009.
-
DEMON: a Proposal for a Satellite-Borne Experiment to study Dark Matter and Dark Energy
Authors:
Alicia Berciano Alba,
Pedro Borges da Silva,
Hans Eichelberger,
Francesca Giovacchini,
Guenther Hasinger,
Michael Lerchster,
Vincent Lusset,
Fabio Mattana,
Yannick Mellier,
Michal Michalowski,
Fabio Noviello,
Carina Persson,
Andrea Santovincenso,
Peter Schneider,
Linda Ostman
Abstract:
We outline a novel satellite mission concept, DEMON, aimed at advancing our comprehension of both dark matter and dark energy, taking full advantage of two complementary methods: weak lensing and the statistics of galaxy clusters. We intend to carry out a 5000 sqdeg combined IR, optical and X-ray survey with galaxies up to a redshift of z~2 in order to determine the shear correlation function. W…
▽ More
We outline a novel satellite mission concept, DEMON, aimed at advancing our comprehension of both dark matter and dark energy, taking full advantage of two complementary methods: weak lensing and the statistics of galaxy clusters. We intend to carry out a 5000 sqdeg combined IR, optical and X-ray survey with galaxies up to a redshift of z~2 in order to determine the shear correlation function. We will also find ~100000 galaxy clusters, making it the largest survey of this type to date. The DEMON spacecraft will comprise one IR/optical and eight X-ray telescopes, coupled to multiple cameras operating at different frequency bands. To a great extent, the technology employed has already been partially tested on ongoing missions, therefore ensuring improved reliability.
△ Less
Submitted 31 May, 2006;
originally announced June 2006.
-
Highly-magnified, Multiply-imaged radio counterparts of the Sub-mm Starburst Emission in the Cluster-Lens MS0451.6-0305
Authors:
A. Berciano Alba,
M. A. Garrett,
L. V. E. Koopmans,
O. Wucknitz
Abstract:
Previous authors have reported the detection of intrinsically faint sub-mm emission lensed by the cluster MS0451.6-0305. They suggest that this emission arises from a merging system composed of a Ly-break galaxy and a pair of extremely red objects which are multiply-imaged in the optical/NIR observations. Since the submm emission presents an unusually large angular extent (~1 arcmin), the possib…
▽ More
Previous authors have reported the detection of intrinsically faint sub-mm emission lensed by the cluster MS0451.6-0305. They suggest that this emission arises from a merging system composed of a Ly-break galaxy and a pair of extremely red objects which are multiply-imaged in the optical/NIR observations. Since the submm emission presents an unusually large angular extent (~1 arcmin), the possible radio emission asociatted with that system can help to identify optical/NIR counterparts due to the higher spatial resolution and astrometric accuracy of the radio observations. Archive VLA data (BnA configuration at 1.4 GHz) was reduced and analysed. A simple lens model was constructed to aid the interpretation of the radio and pre-existing sub-mm and optical/NIR data. We present a 1.4 GHz map of the central region of MS0451.6-0305 and report the detection of gravitationally lensed radio emission, coincident with the previously discovered sub-mm lensed emission. The overall morphology and scale of the radio and sub-mm emission are strikingly similar, extending ~1 arcmin across the sky. This observation strongly suggests that the radio and sub-mm emission arise from the same sources. Preliminary estimates of the total S_850 microns/S_1.4 GHz flux density ratio appear to be consistent with that expected from distant star forming galaxies. The radio emission is resolved into 7 distinct components, and the overall structure can be explained, using a simple lens model, with three multiply-imaged radio sources at z~2.9. One of these sources is predicted to lie in the middle of the previously mentioned system in the source plane, suggesting that it is related to the intense star formation generated during the merging process.
△ Less
Submitted 20 November, 2006; v1 submitted 17 March, 2006;
originally announced March 2006.